Datasheet Diodo NTE5142A (BZD23-C33)
Datasheet Diodo NTE5142A (BZD23-C33)
Features:
D Zener Voltage: 3.3V to 200V
D High Surge Current Capability
Note 1 Test conditions for zener voltage and impedance are as follows: IZ is applied 40 ±10ms prior
to reading. Mounting contacts are located 3/8” to 1/2” from the inside edge of mounting clips
to the body of the diode (TA = +25°C +8°, –2°C).
Note 2 Surge current is specified as the maximum allowable peak, non–recurrent square–wave cur-
rent with a pulse width, PW, of 8.3ms. Mounting contact located as specified in Note 1.
Note 3 Test conditions for voltage regulation are as follows: VZ measurements are made at 10%
and then at 50% of the IZ max value listed in the “Electrical Characteristic” table. The test
current time duration for each VZ measurement is 40 ±10ms (TA = +25°C +8°, –2°C). Mount-
ing contact located as specified in Note 1.
1.000 .370
(25.4) (9.41)