Centring Tool Cylinder Head: PM Ob M Oq KLQF'B
Centring Tool Cylinder Head: PM Ob M Oq KLQF'B
Centring Tool Cylinder Head: PM Ob M Oq KLQF'B
klqf`b=
Wärtsilä Italy, Services
Subject Engine type Ref. Date Document No. DLC Issue Page
2 Tool description
In order to simplify the alignment and the assembly of the cylinder head, a new centring tool has been
developed.
1 Make sure that the thread of every stud is clean and not damaged
2 Make sure that the inner thread of each tool is clean and not damage. If necessary, lubricate it
with engine lubricating oil.
3 Lubricate slightly the external of each tool in the cone with engine lubricating oil or normal
grease.
Wärtsilä Italia SpA Bagnoli della Rosandra, 334 Telephone : +39 040 319 5000
Services 34018 San Dorligo Della Valle (TS) ITALY Fax : +39 040 319 5647
= pm^ob=m^oq
klqf`b=
Wärtsilä Italy, Services
Subject Engine type Ref. Date Document No. DLC Issue Page
4 Mount a tool for every stud as in figure 1. If the tool cannot be fitted, move carefully the cylinder
head.
5 Screw manually all the 4 tools crosswise, using a pin that operates in the holes of the tools.
6 Once all the tools are screwed and cylinder head has been aligned, loose and remove all of
them
7 Then, tight the cylinder head as per the Instruction Manual – Chap. 2.7.1.
Wärtsilä Italia SpA Bagnoli della Rosandra, 334 Telephone : +39 040 319 5000
Services 34018 San Dorligo Della Valle (TS) ITALY Fax : +39 040 319 5647
= pm^ob=m^oq
klqf`b=
Wärtsilä Italy, Services
Subject Engine type Ref. Date Document No. DLC Issue Page
4 Tool purchasing
The toolkit to align a cylinder head, constituted by 4 centring tools (one for every stud) and one pin.
The complete kit can be ordered specifying the article number PAAE073585
In case of need, a single centring tool can be ordered with the article number 9622DT473.
5 Distribution
Wärtsilä Service Network Owners of engines concerned
6 Liability
NO LIABILITY WHETHER DIRECT, INDIRECT, SPECIAL INCIDENTAL OR CONSEQUENTIAL, IS
ASSUMED WITH RESPECT TO THE INFORMATION CONTAINED HEREIN. THIS PUBLICATION IS
CONFIDENTIAL AND INTENDED FOR INFORMATION PURPOSES ONLY.
7 Validity
This general instruction is valid until further notice.
Wärtsilä Italia SpA Bagnoli della Rosandra, 334 Telephone : +39 040 319 5000
Services 34018 San Dorligo Della Valle (TS) ITALY Fax : +39 040 319 5647