Scribd Logo
Upload

Welcome to Scribd!

  • 185 views

    Fire Voice 25-50 Instrucciones de Operación

    Uploaded by

    john castillo
    This document provides operating instructions for a FireVoice-25/50ZS fire alarm control panel. It describes the normal operating status of the panel and what various LED states indicate. It also summarizes steps to take in the event of an alarm or trouble, how to page or make announcements, and what to do in the event of a power failure. Contact information is provided for the local service representative.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content

    Fire Voice 25-50 Instrucciones de Operación

    Uploaded by

    john castillo
    185 views1 page
    This document provides operating instructions for a FireVoice-25/50ZS fire alarm control panel. It describes the normal operating status of the panel and what various LED states indicate. It also summarizes steps to take in the event of an alarm or trouble, how to page or make announcements, and what to do in the event of a power failure. Contact information is provided for the local service representative.

    Original Description:

    Original Title

    52356 Fire Voice 25-50 Instrucciones de operación

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides operating instructions for a FireVoice-25/50ZS fire alarm control panel. It describes the normal operating status of the panel and what various LED states indicate. It also summarizes steps to take in the event of an alarm or trouble, how to page or make announcements, and what to do in the event of a power failure. Contact information is provided for the local service representative.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    185 views1 page

    Fire Voice 25-50 Instrucciones de Operación

    Uploaded by

    john castillo
    This document provides operating instructions for a FireVoice-25/50ZS fire alarm control panel. It describes the normal operating status of the panel and what various LED states indicate. It also summarizes steps to take in the event of an alarm or trouble, how to page or make announcements, and what to do in the event of a power failure. Contact information is provided for the local service representative.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 1

    FireVoice-25/50ZS Operating Instructions

    NORMAL - Only the green POWER ON LED is on. All other INSTRUCTIONS
    LEDs are off. Manual Message Control:
    • Single Zone Operation - press the desired
    PANEL - The key to open the panel can be found at this message switch.
    location:_____________________________________
    Paging:
    • ALL-CALL, press the ALL-CALL Switch
    WHEN AUDIBLE DEVICES ARE SOUNDING -
    and then the microphone Push-to-Talk
    FOR AN ALARM:
    switch.
    1) Evacuate the protected area.
    2) Notify the monitoring service and/or the Fire Department
    immediately. Tell them briefly what happened and what your
    current status is.
    3) If the Fire Department is responding, be prepared to provide
    directions to arriving firefighters.

    FOR TROUBLE ONLY:


    1) Notify the monitoring service and/or Fire Department if the
    host panel is connected to either one, and tell them what is
    happening.
    2) Silence local piezo by pressing the TROUBLE SILENCE key.
    The yellow SYSTEM TROUBLE LED will remain on. Contact Trouble Silence:
    authorized service personnel immediately! • Press to turn off the local trouble sounder

    TO PAGE IN STANDBY or ALARM Paging in Standby or Alarm:


    • Paging by Zone - press the desired Zone
    1) Press the ALL-CALL switch to page to all zones or the desired
    Zone switch(es). This will override the evacuation tone/ switch(es) and then the microphone Push-to-
    message if panel is in alarm Talk switch. Speak clearly into microphone.
    • All-Call - refer to description above.
    2) Key the microphone by pressing switch on side of microphone.
    3) Speak clearly into microphone.
    4) Release microphone switch and press the ALL-CALL switch
    or Zone switch(es) to continue evacuation tone/message.

    POWER FAILURE OR BROWNOUT - The AC power LED,


    located on the main circuit board, will go out for AC fail or brownout.
    SYSTEM TROUBLE LED and the local piezo will turn on for either
    condition. Contact authorized service personnel immediately.
    (Refer to Local Service Representative block below).

    WARNING!
    Do not allow trouble conditions to remain logged
    in the system. Protection that the system offers
    has been compromised, or eliminated when a
    trouble condition exists.

    Local Service Representative Deactivation of Zone(s) in Alarm:


    • Press the activated (green) Zone switch(es).
    Name:______________________________ The LED(s) change to yellow for trouble. To
    reactivate, press the Zone switch(es) again.
    Address:____________________________
    Refer to the FireVoice-25/50ZS Technical Manual
    Telephone:__________________________ P/N 52290 for more details.

    Frame and mount adjacent to the control panel. Document 52356 Rev. A ECN 04-287 5/21/04

    You might also like