Gulliver: Automations For Collective and Industrial Sliding Gates
Gulliver: Automations For Collective and Industrial Sliding Gates
• Self-locking
• Magnetic limit switches
613301 18NET/M 2100 kg *** NET230N z • Speed adjustment and slow down in opening and closing
• Motor control by encoder and obstacle detection
All models have (IB version excluded): control board and fixing plate to be cemented included
All models have (IB version excluded): control board and fixing plate to be cemented included
deasystem.com GULLIVER
Example of installation and accessories
E
D
F
C C
G
B
A A
pos. description
Corrugated pipe for power supply cable 1 Column with photocell
Ø40 corrugated pipe for connection between the control board and the junction box
2 Operator
Ø20 corrugated pipe or external PVC conduit for connection between the control board
and the command and safety accessories 3 Photocells
4 Safety edge
5 Flashing light
6 Keyswitch / Digikey
7 Junction box
COD. 681060
COD. 664020 COD. 664010 A
Art. COVER
Art. PILLY/BASE Art. PILLY/120
Vandal-proof aluminium
Support to be cemented for 100cm column for photocells
cover for LINEAR and
column and accessories (2pcs)
LINEAR/B photocells (2 pcs)
COD. 663280
F COD. 673001 COD. 673011
Art. CARDPROX Art. COINPROX
Art. DIGIRAD Proximity card with
Wireless keypad Proximity token with
transponder, blank transponder
COD. 663090
Art. GT-KEY F COD. 360580
Art. M6
COD. 677611
Art. NET230/N - PROBOX
Metal vandal proof NET230 control board
Galvanized pinion
keyswitch with two mounted on plate with cable
GULLIVER M=6 Z=12
contacts, surface mounted. holders and DIN rail to use on
Øe=84
Supplied with 2 keys. art. STEELBOX
deasystem.com GULLIVER
COD. 677140
COD. 677620 COD. 679210
Art. 400RR - PROBOX Art. NET-
NET400RR control board Art. STEELBOX
mounted on plate with cable EXPANSION Painted steel box with
holders and DIN rail to use Expansion board 6 key lock.
on art. STEELBOX inputs - 8 outputs (300 x h400 x 200 mm)
COD. 672920
COD. 681034
Art. D-BAND KIT Art. SMFLED230/2
Wireless transmitter and receiver
kit in 868 MHz, for resistive or 230V led traffic light: red-
mechanical safety edges green lights
Motor power supply (V) 230V ~ ± 10 % (50/60 Hz) 400V AC ~ ± 10 % (50/60 Hz)
Duty cycle (cycles/hours) 15 - for a 12 m leaf length 17 - for a 14m leaf length
Speed (m/min) 10
140
205
115
117 mm.
Crémaillère
20
105 mm.
150
35
0
450
example of
cementation
deasystem.com GULLIVER
Features
With magnetic encoder, for a smooth Vertical electromechanical limit switch Magnetic limit switches for special
acceleration and during slow down. with protection (art. 18NET, art. 25RRT, installations (art. 18NET/M, art. 25RRT/M)
art. 25RRTF).
Operator with forced ventilation for
intensive use.
35
mm
Pinion thickness of 35mm, to ensure Gear operator with steel worm-screw Movable control board for easier wiring
good coupling with the rack even if the and bronze crown, lubricated with low- and programming.
door is deformed. viscosity grease that ensures long life and
reduced wearing. Also available with external control
board (optional).
Fixing plate to be cemented or screwed. Release with customized key. Vandal-proof container for the protection
of the operator in locations at risk of
tampering.
deasystem.com GULLIVER
IRONBOX
Painted steel vandal-proof box for GULLIVER or REV with magnetic limit switches
and foundation plate.
280
• Robust 2mm thick painted steel frame
• Anti-rust treatment and RAL 9006 hammered finish coating
• Galvanized fixing plate, thickness 10mm
• Lock with personalized key
1002
594
• Wide space for fixing control board and safety or command
accessories
• Must be used with art. 18/IB o art. 25/IB and their respective
control panels
339
DEAinstaller
NET-NODE
cod. 677640
Attention: for the GULLIVER range the app can only be used with art. 18NET, art. 18NET/M
and art. 18/IB (only with NET230N control board)