Professional Documents
Culture Documents
Amberlite IR 120 H L PDF
Amberlite IR 120 H L PDF
[email protected]
www.lenntech.com
Tel. +31-15-261.09.00
PRODUCT DATA SHEET Fax. +31-15-261.62.89
AMBERLITE™ IR120 H
Industrial Grade Strong Acid Cation Exchanger
AMBERLITE IR120 H resin is a gel type strongly AMBERLITE IR120 H resin is an excellent general
acidic cation exchange resin of the sulfonated purpose cation exchange resin that can be used for
polystyrene type. It is used for water a wide variety of water demineralisation
demineralisation (in H+ form) in co-flow applications.
regenerated units.
PROPERTIES
Physical form_______________________________ Amber spherical beads
Matrix_____________________________________ Styrene divinylbenzene copolymer
Functional group ___________________________ Sulfonic acid
Ionic form as shipped _______________________ H+
Total exchange capacity [1] ____________________ ≥ 1.80 eq/L (H+ form)
Moisture holding capacity [1] __________________ 53 to 58 % (H+ form)
Shipping weight ____________________________ 800 g/L
Particle size
Uniformity coefficient [1] __________________ ≤ 1.8
Harmonic mean size [1] ____________________ 0.620 to 0.830 mm
< 0.300 mm [1]____________________________ 2 % max
Maximum reversible swelling _________________ Na+ → H+ ≤ 11 %
[1]
Contractual value
Test methods available upon request.
3 3
* 1 BV (Bed Volume) = 1 m solution per m resin
PERFORMANCE users seek advice from Rohm and Haas in order to
determine the best resin choice and optimum
The operating capacity depends on several factors operating conditions.
such as the water analysis and the level of
regeneration. The data to calculate the operating HYDRAULIC CHARACTERISTICS
capacity and the ionic leakage with co-flow
Figure 1 shows the bed expansion of AMBERLITE
regeneration are given in the Engineering Data
IR120 H resin as a function of backwash flow rate
Sheets: EDS 0264 A and EDS 0265 A.
and water temperature. Figure 2 shows the pressure
LIMITS OF USE drop data for AMBERLITE IR120 H resin, as a
function of service flow rate and water temperature.
AMBERLITE IR120 H resin is suitable for industrial Pressure drop data are valid at the start of the
uses. For other specific applications such as service run with clear water and a correctly classified
pharmaceutical, food processing or potable water bed.
applications, it is recommended that all potential
10°C
10°C 20°C 30°C 40°C 50°C
60
40°C
60 50
50°C
40
60°C
40 30
20
20 10
0 0 10 20 30 40 50 60
0 10 20 30 40 Linear flow rate in m/h
Backwash flow rate (m/h)
AMBERJET is a trademark of Rohm and Haas Company and its affiliates, Philadelphia, U.S.A.
Ion exchange resins and polymeric adsorbents, as produced, contain by-products resulting from the manufacturing process. The user must determine the extent to which
organic by-products must be removed for any particular use and establish techniques to assure that the appropriate level of purity is achieved for that use. The user must
ensure compliance with all prudent safety standards and regulatory requirements governing the application. Except where specifically otherwise stated, Rohm and Haas
Company does not recommend its ion exchange resins or polymeric adsorbents, as supplied, as being suitable or appropriately pure for any particular use. Consult your Rohm
and Haas technical representative for further information. Acidic and basic regenerant solutions are corrosive and should be handled in a manner that will prevent eye and skin
contact. Nitric acid and other strong oxidising agents can cause explosive type reactions when mixed with Ion Exchange resins. Proper design of process equipment to prevent
rapid buildup of pressure is necessary if use of an oxidising agent such as nitric acid is contemplated. Before using strong oxidising agents in contact with Ion Exchange Resins,
consult sources knowledgeable in the handling of these materials.
Rohm and Haas Company makes no warranties either expressed or implied as to the accuracy or appropriateness of these data and expressly excludes any liability upon Rohm and
Haas arising out of its use. We recommend that the prospective users determine for themselves the suitability of Rohm and Haas materials and suggestions for any use prior to their
adoption. Suggestions for uses of our products of the inclusion of descriptive material from patents and the citation of specific patents in this publication should not be understood as
recommending the use of our products in violation of any patent or as permission or license to use any patents of the Rohm and Haas Company and its affiliates. Material Safety Data
Sheets outlining the hazards and handling methods for our products are available on request.