Safety Shoe: Annexure-5 List of Approved PPE's & PPE Matrix
Safety Shoe: Annexure-5 List of Approved PPE's & PPE Matrix
Safety Shoe: Annexure-5 List of Approved PPE's & PPE Matrix
ANNEXURE-5
S.N ITEM SPECIFICATIONS SUGGESTED VENDORS
1 Safety Shoe Industrial safety shoe shall be suitable for oil refinery M/s Liberty,
& having resistance to oil, acids/alkali, antistatic & M/s BATA,
electrical resistant. The shoe should meet the M/s Karam,
requirements of relevant IS 15298 (Part 2) : 2011 / M/s Rahman,
ISO 20345 : 2004/ DIN EN 344-1,345 #1 (1997) and M/s Allen Cooper,
DIN 4843 part 100 having the following broad M/s Red Chief,
specification: - M/s Myco.
1. Upper Leather- The Shoe upper should be made
of water penetration & absorption resistant
leather having properties as follow:
a)Thickness-2.0 to 2.5 mm
b)Tensile Strength-1.55 kg.mm2 (min.)
c)Elongation-45-75%
d)Tongue Tear Strength- 45 kg.cm2(min.)
e)Colour Fastness -Fast
f)Flexibility Test -No damage / crack till 100000 cycles
(min.)
The upper should have padded collar for ankle
protection, bellow tongue to prevent water slippage
& suitable D-rings for lace
Bottom Sole -Bottom sole should be made with Poly
Urethane Rubber (PU/PUR/ TPR/TPU) as per relevant
DIN/IS/ISO Specification of flexing/ Abrasion/oil
Swelling/electrical resistance & hardness. Cushion in
the sole to be provided. The sole should have Anti
Skid & Anti Static Design. There should not be any
nails in the shoe.
2. The material should be resistant to Oils, alkalis &
Acids.
3. Toes Cap- Steel / Alloy Toe cap.
4. Threads- Nylon twisted threads resistant to Oil,
Acids & Alkali should be used.
5. Laces -Brown colour round shape Nylon laces of
100 cm length should be used which shall meet
following requirement:
a) Breaking Strength-500 N (Min.)
b) Elongation-25-30%
c) Slip Resistance-12 N (Min.)
d) Bodkin Strength-150 N (Min.)
6. Color: Dark Brown/ Black
7. Test Required -Vendor shall carry out the tests as
per DIN/IS/ISO standard or produce the test
Certificate from Govt. approved Test Lab
8. Guarantee- Vendor should give a guarantee of
maximum period in months against any
manufacturing defects from the date of supply of
the material
9. General: Year of Manufacturing shall be embossed
at suitable location on the sole.
ANNEXURE-5
2 Industrial Industrial safety helmet of tough light weight made of M/s Joseph Leslie & Co.,
Safety superior quality HDPE. M/s Sure Safety,
Helmet It should have minimum 6 points STAZ on suspension M/s Karam,
with LDPE cross member on head. M/s 3M,
It should have adjustable headband and black nylon M/s MSA
double , V- shape chinstrap to reduce the risk of the
helmet coming off as a result of impact during a fall
(head band range 530 - 600 mm).
Helmet should be provided with appropriate
sweatband to absorb and dry sweat from the
forehead and must have the facility/ slot to fix
earmuff.
Helmet should have arrangement for side
attachments.
The safety helmet shall be provided with of adjustable
knob mechanism such as ratchet facility.
Helmet shall be approved by Directorate-General of
Mines Safety (DGMS) and having ISI mark (IS: 2925)
and EN 397 certified.
3 Dust Mask NIOSH N-95 DUST/ MIST RESPIRATOR SPECIFICATIONS M/s Joseph Leslie & Co.,
Description : Should be NIOSH N95 filtering face piece M/s 3M,
particulate respirator for Dust/Mist applications. M/s Sure Safety,
Construction : It should have a Superior molded cup M/s Karam,
shaped design with special stiffened inner shell to M/s Voltech,
allow retention of shape after repeated use. Triple M/s ABN Equipments,
layer non-woven micro-fiber filter material. The M/s Kewalson.
construction should incorporate metal free welded
headbands (Staple/Stitching free), a aluminum nose
clip and foam around the nose section.
Filter Media : Melt blown polypropylene micro fibres
charges with a stable charge during drawing the fiber.
This should give high filtration efficiency with lowest
possible breathing resistance. The filter media should
be the whole respirator surface & additionally should
also have Electro-statically charged filter media
capable of filtering 0.3 micron, which is the most
penetrating particle size.
Head Bands : Should have, Staple/Stitching Free; Twin
welded head bands made of poly-isoprene (devoid of
skin irritation caused by LATEX), having very good
elastic retention properties. The Band should also
provide constant tension to the wearer through out
the usage life for good face seal Fit and should also
not cause irritation to the wearer.
Nose Clip : The nose clip should be made of
strengthened aluminium with high quality adhesive to
ensure uniform adhesion to the respirator surface
and long rust free life. The aluminium nose should be
soft and pliable and confirm to the nasal contours of
ANNEXURE-5
5 Safety PANORAMA type Safety Goggles with clear vision for M/s Joseph Leslie & Co.,
Goggles for use while handling Acid/Alkali & other chemicals. M/s 3M,
Acid/Splash Safety goggles shall be made of polycarbonate with M/s Sure Safety,
protection proper sealing arrangement to prevent entry of M/s Karam,
chemicals from sides. Material used for frame shall be M/s Unicare,
resistant to chemicals. It should have ventilating ports M/s ABN Equipments,
on sides.It should be able to be worn over M/s Kewalson.
prescription spectackles
Frame: Soft vinyl Goggle body
ANNEXURE-5
7 Full body 1. CE marked Full Body Harness with Double Lanyard M/s Udyogi Plastics,
Safety Integrated with Energy Absorber shall conform to EN M/s Joseph Leslie & Co.,
Harness 361 latest edition (EN Standard for Personal M/s 3M,
Protective Equipment against fall from heights- Full M/s Sure Safety,
body harness), Lanyards shall conform to EN 354 M/s Karam,
latest edition (EN Standard for Personal Protective M/s Unicare,
Equipment against fall from heights- Lanyards) and M/s ABN Equipments,
Energy Absorber shall conform to EN 355 latest M/s Kewalson.
edition (EN Standard for Personal Protective
Equipment against fall from heights- Energy
Absorber).
"Full body harness shall have front attachment at
chest level (two textile loops) for fall arrester and
back attachment (Dorsal steel alloy D ring),
conforming to EN 362 (EN Standard for Personal
Protective Equipment against fall from heights-
Connectors) latest edition, fall arrest lanyard.
"It should be with two adjustable shoulder and thigh
straps with roller buckles for easy adjustment.
"It should have sit strap ideally positioned for
extended comfort.
2. Double Synthetic fiber rope Lanyard with hooks
Integral with Energy Absorber shall carry CE marking.
ANNEXURE-5
8 Hand Gloves 1) Made out closely and thickly woven cotton knitted M/s Midas Safety,
(Cotton hand gloves having have four fingers and the thumb M/s H K Safety,
Polka Dotted with coating of co-polymer of butadiene - acrylonitrile M/s Ganeshi Lal
for called polka dots at palm side for very good dry grip Sumerchand,
Mechanical and uncoated back to allow the air circulation for M/s Joseph Leslie & Co.,
Grip) keeping the hands cool. M/s Sure Safety,
2) The Polka dot cotton knitted hand gloves will be M/s Karam,
little elastic in nature for better grip and will have M/s Voltech,
very good mechanical resistance for abrasion, cut, M/s Kewalson,
wear & tear. M/s Swastik Industrial
3) The Polka dot cotton knitted hand gloves will Services.
confirm to EN-388 or relevant ANSI standard.
4) The overall length of the hand gloves will be from :
210 mm to 280 mm.
5) The Polka dot cotton knitted hand gloves should be
suitable for Better Grip during Material Handling ,
packaging & General Maintenance work.
9 Hand Gloves The gloves will be made of unbleached cotton drill M/s Midas Safety,
(Cotton- cloth. Gloves will be of the four fingers and thumb M/s H K Safety,
Canvas Type design having a one-piece palm including the front of M/s Ganeshi Lal
for Material all four fingers and back of the index finger also. The Sumerchand,
Handling) seam on the back of the hand shall be an in-seam. The M/s Joseph Leslie & Co.,
design shall be generally clute pattern as per M/s Sure Safety,
is:6994(part-i)-1973 with inside blanket lining on the M/s Karam,
front side of fingers,thumb and palm. overall finished M/s Voltech,
length shall be 14 inch. The stitching of fingers, thumb M/s Kewalson,
and cuff shall provide a comfortable wear to the user. M/s Swastik Industrial
ANNEXURE-5
11 Hand Gloves CE/ ANSI approved five fingers Hand Glove with heat M/s Midas Safety,
(Heat resistant upto 250 deg C, as per EN-407. M/s H K Safety,
Resistant- Overall length of the Glove (from middle finger to M/s Ganeshi Lal
for welding other end) shall not be less than 10 inch. Sumerchand,
etc.) Heat resistance hand glove to be soft & comfortable M/s Joseph Leslie & Co.,
for use in petrochemical operations. M/s Sure Safety,
M/s Karam,
M/s Voltech,
M/s Kewalson,
M/s Swastik Industrial
Services.
Guidelines on Personal Protective Equipment (PPE)
INDEX
INDEX
e) Shuttering works
f) Brick masonry
g) Handling of Battery
1) Additional PPE to be provided for various activities as per requirement of Job Safety Analysis (JSA), OISD and
Statutory stipulations.
2) Training inputs as required to be given for proper usage, maintenance of PPE.
3) Various EN Standards / BIS codes mentioned are available on line on IOCL CO, HSE website.
This document is strictly for internal circulation of Indian Oil Corporation Limited. No part of this publication can be
reproduced or transmitted in any form or by any means, including electronic or mechanical, photocopying, recording, or any
information storage and retrieval system without permission in writing, from Corporate HSE Department, Indian Oil
Corporation Limited.
1 Work at Height ( height I) Safety Shoe (A) The safety shoe shall have Striking Not suitable Exceeding one
> 2 M) Contd... following marking as per IS against for hazards year from the
15298 ( part -2) : stationary like Chemical date of first
burns , use of the
object.
a) size; electrical shoe .
Striking by flash, welding sign of crack /
b) manufacturer’s
moving object spark and heat damage .
identification mark;
c) Year of manufacture and Stepping on radiation
at least quarter; hot object Not suitable if Excessive wear
d) License No ( CM/L) Stepping on it is necessary
e) IS Mark to minimise
sharp object As per
electrostatic
A Typical specimen of marking. Penetration Manufactures
Category of Safety Shoe charges in the
(S3 category) recommendat
shortest
ions.
Water possible time .
Category of Safety shoe
penetration Not suitable
(S1,S2,S3 etc) as required as for work in
and
per Table 16 of IS 15298 (part explosive work
absorption.
2) : 2011 area.
(S2 & S3
S1 : Closed seat region, category)
Antistatic properties , Energy
absorption of seat region
S2 : S1 plus
Water penetration and water
absorption.
S3 : S2 plus
Penetration resistance (S3)
Cleated outsole
Guidelines on Personal Protective Equipment (PPE)
SN Activity Required PPEs Quality assurance Protection Limitation of PPE Hazard of Not wearing of When to be
(Pictorial Against hazard PPE discard
Display)
Work at Height ( II) Full body Safety 1. The full body harness shall Accidental fall Shall be of no use Sign of
height > 2 M) Harness with energy conform to EN 361 if anchor point / crack /
Contd... absorber : Direct the loads to life line / lanyard damage/
( Alternative -I) Marking on the full body harness shall legs. is not properly stitching
conform to 2.2 of EN 365:1992 and any designed. giving
Lanyard along with 5 text shall be in English. In addition to Keeping body way
Point ( 1 Dorsal + 2 conforming to 2.2 of EN 365:1992 the upright. There should be
Textile loops+ 2 marking shall include the following. proper Webbing
sternal D ring) harness Prevent the neck arrangement for and rope
to be used for rescue On the full body harness, a damage rescue for cuts,
or tower climbing pictogram to indicate that users tears,
shall read the information supplied slightly opens the After accidental excessive
by the manufacturer. breathing way. fall & before wear and
safety harness damages
Prevents from
becoming
colliding with the
effective, the If in
ground or structure
person should not doubt
in case of a fall.
strike ground / “Throw it
object. (Prevent Out”
A capital letter “A” at each fall Antistatic risk of bottoming
arrest attachment element; characteristics As per
out)
The model/type identification mark Manufact
of the full body harness; ures
The number of this European recomme
Standard, i.e. EN 361. SAFETY BELT NOT ndations
2. Connector shall conform to EN TO BE USED
362 and Marking on the connector
shall conform to EN 365. The
marking shall include:
Work at Height ( A Typical specimen of marking. Marking of major axis strength with gate closed &
height > 2 M) locked.
Contd...
Work at Height ( III) Full body Safety Full body harness conforming to IS 3521 may be Accidental fall Shall of no use Sign of crack /
height > 2 M) - Harness with engery allowed in "Green field project" where antistatic Direct the loads if anchor point damage/
Contd... absorber (Alternative safety harness are not required. to legs. / life line / stitching giving
Following marking to be ensured in case of IS
-II) Keeping body lanyard is not way
marked full body Harness.
upright. properly
The name, trade-mark or other means of Prevent the designed. Webbing and
identification of the manufacturer or the neck damage There should be rope for cuts,
supplier who is responsible for acting on behalf slightly opens proper tears,
of the manufacturer for claiming compliance the breathing arrangement excessive wear
with this standard; way. for rescue and damages
Manufacturer’s product identification Prevents from After
accidental fall If in doubt
information that shall include the colliding with
& before safety “Throw it Out”
manufacturer’s batch or serial number that the ground or
enables the origin of the item to be traced; structure in harness
As per
The year of manufacture; The identity of the case of a fall. becoming
Manufactures
fibre used as the material of construction; effective, the
recommendati
Information that states by appropriate means person should
ons
the intended purpose of each attachment not strike
element ground /
and to identify specifically those attachment object.
elements that are designed to be used as part of (Prevent risk of
a complete fall arrest system; and bottoming out)
Warning for not to deviate from the
manufacturer’s instructions. SAFETY BELT
A Typical specimen of NOT TO BE
Name of marking USED
Manufacture and ISI marked
other details Other details such full body
year of harness are
manufactures , not antistatic
ISI Mark and number batch number etc
hence not
Material used recommended
in running
plants.
Guidelines on Personal Protective Equipment (PPE)
SN Activity Required PPEs Quality assurance Protection Limitation of PPE Hazard of Not When to be
(Pictorial Display) Against wearing of PPE discard
hazard
Work at Height ( height Energy absorbing lanyard double Energy absorbing lanyard shall conform to Accidental Shall of no use Sign of cut
> 2 M) - Contd... 'Y' Type EN 355 and shall have the following Fall if anchor point / damage
marking : / life line is After every
To be attached to full body harness fall.
not properly
at one end and life line at other a) On the energy absorber, a pictogram to As per
end designed.
indicate that users shall read the manufactur
Must if full body harness There should be es
information supplied by the
being used for protection manufacturer (see figure); proper recommend
against fall. arrangement ation.
The total length of a lanyard for rescue
connected to an energy After
absorber (including
accidental fall
terminations and connectors)
shall not exceed 2 m. & before safety
harness
A Typical specimen of becoming
marking b) the maximum length allowed of the
effective, the
energy absorber including lanyard;
c) the model/type identification mark of person should
Model / Type and the energy absorber; not strike
identification mark d) the number of this European Standard, ground /
i.e. EN 355. object.
Year of manufacturing (Prevent risk of
The marking shall conform to EN 365 bottoming out)
and additionally shall include the
EN number following :
SN Activity Required PPEs Quality assurance Protection Limitation of PPE Hazard of Not When to be discard
(Pictorial Display) wearing of PPE
Against
hazard
Work at Height ( height IV) Restraint lanyard Lanyard shall conform to EN 354 (latest Accidental Shall be of no Check metal fittings for
> 2 M) - Contd... edition). Connector incorporated in fall - Lets a use if life line sharp edges, excessive
To be secured to lanyard shall conform to EN 362. worker & anchor wear, correct operation and
properly designed travel just points are not distortion.
anchorage Marking on the lanyard shall conform to properly
EN 365 and, in addition, shall include at far enough
designed.
least the following: to reach the If in doubt “Throw it Out”
The restraint To ensure
edge but not that fall
lanyards need not a) the maximum lanyard length, in far enough restraint
have shock accordance with 4.1.6; to fall over lanyards are
absorption element b) the month and year of manufacture. never used
incorporated in for the
them As per EN 365 marking shall include : purpose of
fall arrest
Means of identification, e.g. As per Manufactures
manufacturer’s name, supplier’s recommendations
name, or trademark;
Manufacturer’s production batch or
serial number or other means of
traceability;
Model and type/identification;
Number and year of the document to
which the equipment conforms;
Pictogram or other method to
indicate the necessity for users to
read the instructions for use.
Name of manufacture A Typical specimen of marking
Pictogram
Guidelines on Personal Protective Equipment (PPE)
SN Activity Required PPEs Quality assurance Protection Limitation Hazard of Not wearing of When to be discard
of PPE PPE
(Pictorial Display) Against hazard
Work at Height ( V) Rope Grab (in Rope grab shall conform to EN 353-2 : Accidental fall Shall be of Check metal fittings for
height > 2 M) - case of vertical 2002 & Marking on the guided type no use if sharp edges, excessive
Contd... lifeline being used) fall arrester and the flexible anchor The anchorage life line & wear, correct operation
line shall conform to EN 365 . In line in anchor and distortion.
The rope grab addition shall include the following:
connection points are
immediately grabs on with the given not If in doubt “Throw it Out”
Means of identification, e.g.
the line in the event manufacturer’s name, supplier’s rope grab properly
of a fall , there by name, or trademark; provides designed. Coloured tracer strand
arresting the fall Manufacturer’s production batch necessary which loses its colour in
or serial number or other means shock due course of time to
of traceability; absorption. show that the rope is now
Model and type/identification; is unfit for future use
Number and year of the
document to which the As per Manufactures
equipment conforms;
recommendations
Pictogram or other method to
indicate the necessity for users to
read the instructions for use.
A Typical specimen of marking
CE Marking
EN Number
Name of
Manufacture
Pictogram
Pictogram
Note : PPE mentioned at III, IV & V above may not be required simultaneously while working at height. These use shall depend upon type of activity
Guidelines on Personal Protective Equipment (PPE)
SN Activity Required PPEs Quality assurance Protection Limitation of PPE Hazard of Not When to be discard
(Pictorial Display) Against hazard wearing of PPE
1 Work at Height VI) Helmet (A) The helmet shall Shock absorption The protection given by a helmet Sign of crack /
( height > 2 M) conform to EN 12492 depends on the circumstances of damage .
and shall have Penetration the accident and wearing a helmet De-colouration
following markings : cannot always prevent death or failing in lab test to
Impact long term disability. be done every 1-2
There may be a foreseeable risk years depending on
a) the number of this
Within limits that helmets could become condition
European Standard;
trapped and thereby cause a risk cradle to be
b) the name or stipulated in EN
of strangulation. changed after
trademark of the 12492
manufacturer and/or Cannot provide protection against every one year
his authorized hazard like splash of hot liquid, On sustaining a
representative; work in hot area, cryogenic or severe blow even if
c) the designation of corrosive liquid , flying hot damage is not
the model; particles like chipping, welding, apparent
d) the year and direct fire hazard, contact with As per
quarter of bare live electrical conductor . Manufactures
manufacture; recommendations.
e) the size or size For cleaning,
range (in cm). maintenance or
disinfection, use only
substances ( No
Solvent) that have no
adverse effect on the
helmet and are not
known to be likely to
have any adverse
effect upon the
wearer, when
applied in
accordance with the
manufacturer’s
instructions and
information).
Guidelines on Personal Protective Equipment (PPE)
SN Activity Required PPEs Quality assurance Protection Limitation Hazard of When to be discard
(Pictorial Display) Not wearing
Against hazard of PPE of PPE
2 a) Excavation. I) Helmet (B) The helmet shall conform to either IS 2925 or Shock Absorption Resistance Not Sign of crack /
EN 397 Penetration Resistance suitable damage .
for hazards De-colouration
b) Fire pump Impact
a) The helmet conforming to IS 2925 shall like splash cradle to be
Operation. have following marking changed after
of hot
every one year
Protection as per EN 397 liquid,
c) Testing of Manufacturer’s name or trade-mark, On sustaining a
work in hot severe blow
Pressure Shock absorption area, even if damage
Gauge Size of helmet.
Penetration resistance cryogenic is not apparent
Impact or As per
The helmets may also be marked with
the ISI Certification corrosive Manufactures
Mark. The above protection shall be within the liquid , recommendati
limitations of various test as stipulated in flying hot ons
A Typical specimen of marking IS 2925 /EN-397. particles
Marking for Optional test as per EN 397 as like For cleaning,
Name of chipping, maintenance or
per clause no 7.2.2. disinfection, use
manufactures welding, only substances (
Each helmet shall carry moulded or direct fire No Solvent) that
impressed marking or shall carry a durable hazard, have no adverse
self-adhesive label stating the optional effect on the
ISI Mark contact helmet and are
requirements complied with, as follows: with bare not known to be
Optional requirement Marking/Label likely to have any
live
Very low temperature – 20 °C or – 30 electrical adverse effect
°C as appropriate upon the wearer,
Size conductor when applied in
Very high temperature + 150 °C accordance with
Electrical insulation 440 V a.c. the
Lateral deformation LD manufacturer’s
instructions and
Molten metal splash MM information).
Guidelines on Personal Protective Equipment (PPE)
SN Activity Required PPEs Quality assurance Protection Limitation Hazard of When to be discard
(Pictorial Display) Not wearing
Against hazard of PPE of PPE
Name of
manufacture
Year of
EN Std Manufacture
CE Marking Size
SN Activity Required PPEs Quality assurance Protection Limitation Hazard of When to be discard
(Pictorial Display) Not wearing
Against hazard of PPE of PPE
SN Activity Required PPEs Quality assurance Protection Limitation Hazard of When to be discard
Against hazard of PPE Not wearing
(Pictorial Display) of PPE
3 Excavation work II) Gum Boot -Safety The gum shall Striking against Not suitable for hazards exceeding one
Involving dewatering conform to IS 12254 stationary like Chemical burns , year from the
works : Contd and have following object. electrical flash, welding date of first use
marking : spark and heat radiation of the shoe .
Striking by
Not suitable if it is
moving object necessary to minimise
Name of the Stepping on electrostatic charges in sign of crack /
manufacturer or sharp object the shortest possible time damage / cut
its recognised Water, alcohols, .
trade-mark, if acids and Not suitable for work in Excessive wear
any; alkalise explosive work area.
A Typical specimen of
Size No.; As per
marking
Batch No., and Manufactures
Month and year recommendatio
of manufacture. ns
Size
ISI Mark
Guidelines on Personal Protective Equipment (PPE)
SN Activity Required PPEs Quality assurance Typical Industrial Limitation Hazard of Not When to be discard
(Pictorial Display) Operation of PPE wearing of PPE
Excavation work III) Goggle : The goggles shall conform to • surround the Limitation exceeding one year from
Involving dewatering EN 166 and EN 170 & shall have eye area, : the date of first use of the
works : Contd.. following markings : give more Uncomfort goggles .
protection in able to
situations wear with sign of crack / damage .
Marking on the lens as
where one other head
Impact resistance (B)
encounters gear like Excessive wear
Optical Class (1) , anti
splashing helmet, As per Manufactures
fogging (N), Anti Scratch
liquids, ear muffs
resistance (K), no 2-1.2 recommendations
fumes, or
marked 2C
vapors, respirator
shade as per EN 170,
powders,
A Typical specimen of marking Manufacture's Name CE and
dusts, and
any other point as per
mists
discretion of IOCL in line
with EN 166 and 170
CE Marking
Optical Class
Scratch Resistance
Manufacture Name
Guidelines on Personal Protective Equipment (PPE)
SN Activity Required PPEs Quality assurance Protection Limitation Hazard of Not wearing of When to be discard
Against hazard of PPE PPE
(Pictorial Display)
3 Excavation work IV) Gloves Gloves shall conform to EN Tear Not suitable
Involving dewatering 374 and 388 & gloves shall cut for hazards sign of crack / damage
works : Contd.. Alternative - I : Gloves as have the following markings Abrasion like electrical / cut
per EN stand 374 and 388. as per as per EN 420 Puncture flash, welding
spark and heat Excessive wear
a) Name, trade mark or radiation
other means of IMPORTANT All gloves
identification of must be thrown away
manufacturer or his (in the hazardous waste
authorized representative; bin if required) no more
b) Glove designation than 8 hours after
(commercial name or code initial contact with the
allowing the user to identify chemical.
clearly the product within
the Achieving date of
A Typical specimen of manufacturer's/authorized obsolescence
marking representative's range);
c) Size designation; As per Manufactures
Name of Manufacture recommendations
d) Date of obsolescence a if
CE Marking applicable per clause 7.2.3
SN Activity Required PPEs Quality assurance Protection Limitation Hazard of Not wearing of When to be discard
Against hazard of PPE PPE
(Pictorial Display)
3 Excavation work Alternative - II Alternative -II Light Not suitable sign of crack / damage / cut
Involving dewatering handling for hazards
works : Contd.. Gloves as per IS Alternatively Gloves shall operation like electrical Excessive wear
6994. conform to IS : 6994 (Part I) - flash, welding
1973 & shall have the Tear spark and heat As per Manufactures
following marking . radiation
recommendations
Puncture
a) The manufacturer’s name
or recognized trade-mark; Cut
b) The type and nominal size IMPORTANT All gloves must be
of the gloves; thrown away (in the hazardous waste
bin if required) no more than 8 hours
C) Year of manufacture; and after initial contact with the
chemical.
d) Where applicable, the
words ‘light mass’, ‘medium
mass’, or ‘heavy mass ‘ WARNING If you work with moving
machine parts, choosing a glove
The gloves may also be
that is the right size and made
marked with the Standard
Mark. from a less durable material is
vital, since the glove easily tears
Light Abrasion ix of table 2 apart if you get caught in the
machinery.
Recommended type of
Gloves. is 1, 2, 8, 14. 15. 16
As of May 2017 there is no party having BIS license. Use of this product is permitted assuming that in future some party
may get BIS license.
Guidelines on Personal Protective Equipment (PPE)
SN Activity Required PPEs Quality Typical Protection Limitation Hazard of Not wearing of PPE When to be
(Pictorial Display) assuran Industrial Against hazard of PPE discard
ce Operation
4 Blast cleaning
(confined space
-
/
I) Helmet (A)
Please refer (VI) on page 11 Please refer
(VI) on page
external)
11
III) Goggle
Please refer (III) on page 16 Please refer
(III) on page
16
Guidelines on Personal Protective Equipment (PPE)
Activity Required PPEs Quality assurance Protection Limitation Hazard of Not wearing of When to be discard
(Pictorial Display) Against hazard of PPE PPE
4 Blast cleaning - IV) Ear Muff of suitable Ear muff shall conform to EN 352 Extreme noise Over 8 hours Ear muff with
(confined space / size shall have following marking : Noise induced may be cracked, cut,
external) - Contd hearing losses uncomfortabl or missing
"Medium size range "fit a) the name, trade mark or other e in hot gaskets
satisfactorily in majority identification of the environments
Permissible Noise manufacturer or his authorised Note : . Excessive wear
exposure as per of Industrial Application In addition to hearing
representative; & tear
OSHA 29 CFR b) the model designation; loss, excessive noise Eyeglass
1910.95 c) the number of this EN exposure may wearers may Damage if any.
DB Hours Standard, i.e “EN 352” contribute to mental not get a As per
d) in the case of ear-muffs and physical stress, good seal Manufactures
90 8 intended by the manufacturer to certain illnesses, and Resonate
accidents recommendati
92 6 be worn in a particular (vibrate) at
orientation, an indication of the ons
95 4 lower sound
97 3 FRONT and/or TOP of the cups, frequencies
100 2 and/or an indication of LEFT and
102 1.5 RIGHT cup.
105 1
Check the NRR (Noise Reduction
110 0.30 A Typical specimen of
115 0.15 or marking Rating,) to ensure noise
less exposure within permissible
limits
CE Marking
EN Number
Guidelines on Personal Protective Equipment (PPE)
SN Activity Required PPEs Quality assurance Protection Limitation Hazard of Not wearing of When to be discard
(Pictorial Display) Against hazard of PPE PPE
Hand gloves -
involving high
pressure as per EN
388 and 374.
SN Activity Required PPEs Quality assurance Protection Limitation Hazard of Not When to be
(Pictorial Display) Against hazard of PPE wearing of PPE discard
4 Blast cleaning - VI) Apron The apron shall conform to EN 13892-1 and Protection to Not suitable Damage / infection exceeding
(confined space / shall have following markings : the full body for flame to skin etc six month
external) - Contd Alternative -I : Apron against airborne and Hot from the
as per EN 13982 -1 1. The marking shall be clearly visible and as solid material date of first
durable as adequate for the life of the particulates. use of the
clothing. apron .
Name of
Manufacture
Other
information
Pictograms as per
EN
Year of manufactures
Guidelines on Personal Protective Equipment (PPE)
SN Activity Required PPEs Quality assurance Protection Limitation Hazard of Not When to be
(Pictorial Display) Against hazard of PPE wearing of PPE discard
Blast cleaning - Alternative -II : Apron Alternative -II : Alternatively suit shall Protection to Not suitable for Damage / infection exceeding
(confined space / as per IS 4501 conform to IS : 4501 : 1981 shall have the full body flame and Hot to skin etc six month
external) Contd the following marking . against airborne material from the
solid date of first
The marking shall be particulates. use of the
clearly visible and as durable as apron .
adequate for the life of the clothing.
sign of
marked inside with manufacturer’s crack /
name or recognized trade mark, if damage .
any. The ink shall be non-irritating
to skin and shall not impair the Excessive
quality of aprons. wear
As per
The aprons may also be marked with Manufactur
the ISI Certification Mark. es
recommen
The finished material shall be white dations
or of a suitable colour on two sides
as agreed to between the purchaser
and the supplier. Do not use
As of May 2017 there compresse
d air to
is no party having BIS clean as
this will
license. Use of this create dust
product is permitted in the air.
assuming that in • Clean and
future some party decontamina
te tarps and
may get BIS license. other
equipment
on the
worksite.
Guidelines on Personal Protective Equipment (PPE)
SN Activity Required PPEs Quality assurance Protection Limitation Hazard of Not When to be discard
(Pictorial Display) Against hazard of PPE wearing of PPE
Blast cleaning - Alternative -III : Boiler Alternative -III : Cloth and stitching Protection to Not suitable Damage / infection exceeding six
(confined space / suit / coverall should be of good quality on visual the full body for flame and to skin etc month from the
external) Contd inspection against airborne Hot material date of first use of
solid the apron .
particulates.
sign of crack /
damage .
Excessive wear
As per
Manufactures
recommendations
Do not use
compressed air
to clean as this
will create dust
in the air.
Avoid
blasting in
windy
conditions to
prevent the
spread of any
hazardous
materials.
Guidelines on Personal Protective Equipment (PPE)
SN Activity Required PPEs Quality assurance Protection Limitation Hazard of Not When to be discard
(Pictorial Display) Against hazard of PPE wearing of PPE
Blast cleaning - confined VII) Half face mask 1. The half air mask shall conform to EN 140 Respiratory Not Silicosis Occupational Sign of crack /
space - Contd and shall have following : protection. suitable lung diseases. damage
A Typical specimen for heavy Excessive wear
of marking a) The manufacturer shall be identified by name, Protection gas Deposition of Damage of strap
trade mark or other means of identification. against inhaling concentrat particulate matter in After end of shelf life
b) All units of the same model shall be provided dust, etc. ion Lung. Change of filter /
with a type-identifying marking. cartridges at least
c) Size (if more than one size is available). every six month
d) The number and the year of this European Performance of the
Standard. ie EN 140 components may be
affected by aging
e) Where the reliable performance of As per Manufactures
components may be affected by ageing, means
recommendations
of identifying the date (at least the year) of
manufacture shall be given
III) Goggles
Please refer (III) on page 16 Please refer (III) on
page 16
Guidelines on Personal Protective Equipment (PPE)
SN Activity Required PPEs Quality assurance Protection Limitation Hazard of Not When to be discard
(Pictorial Display) Against hazard of PPE wearing of PPE
SN Activity Required PPEs Quality assurance Protection Limitation Hazard of Not wearing of PPE When to be discard
(Pictorial Display) Against hazard of PPE
SN Activity Required PPEs Quality assurance Protection Limitation Hazard of Not When to be discard
(Pictorial Display) Against hazard of PPE wearing of PPE
6
a) Working in Confined I) Safety Helmet (B)
Please refer (I) on page 12 Please refer (I) on
page 12 &13
space
&13
b) Testing of Gas sensor
c) Tank Gauging
d) De Gassing of LPG
Cylinder
e) Shuttering works
f) Brick masonry
II) Safety Shoe (A)
Please refer (I) on page 4 Please refer (I) on
page 4
g) Handling of Battery
Guidelines on Personal Protective Equipment (PPE)
Activity Required PPEs Quality Protection Limitation of PPE Hazard of Not When to be discard
(Pictorial Display) assurance Against hazard wearing of PPE
c) Tank Gauging
d) De Gassing of LPG
Cylinder
e) Shuttering works
III) Goggles
Please refer (III) on page 16 Please refer (III)
on page 16
Guidelines on Personal Protective Equipment (PPE)
Activity Required PPEs Quality assurance Protection Limitation of Hazard of Not wearing of When to be discard
(Pictorial Display) PPE PPE
Against hazard
N Activity Required PPEs Quality Protection Limitation Hazard of Not When to be discard
assurance Against hazard of PPE wearing of PPE
(Pictorial
Display)
b) Blinding
and de-
blinding
flange
work
SN Activity Required PPEs Quality assurance Protection Limitation Hazard of Not When to be
(Pictorial Display) Against hazard of PPE wearing of discard
PPE
9 Electrical works II) Safety Shoe (B) The safety shoe shall have following Striking against Not Exceeding
marking as per IS 15298 ( part -2) : stationary object. suitabl one year
Electrical sub-station current Striking by moving e for from the
carrying equipment a) size; work date of first
object
b) manufacturer’s identification mark; in use of the
Electrical explos shoe .
c) Year of manufacture and at least
quarter; resistance ive Sign of
d) License No ( CM/L) work crack /
e) IS Mark area. damage
Excessive
Or wear
A Typical specimen of marking. As per
Work Manufactur
activit es
ies recommend
requiri ations
ng
antista
tic
Category of Safety shoe (,S3 etc) as work
required as per Table 16 of IS 15298 (part
2) : 2011
SN Activity Required PPEs Quality assurance Protection Limitation Hazard of Not wearing of When to be discard
(Pictorial Display) Against hazard of PPE PPE
9 Electrical works : II) Electrical Hand gloves The gloves shall be marked Type 2—For 1) Type of the Frequently
Electrical sub-station Insulating Rubber Electrical indelibly at the use at voltage PPE restricts used Gloves to
current carrying Gloves back with the following information not exceeding the maximum be re-tested at
equipment Contd as per IS 4770 1 100 ac rms voltage at intervals of not
Type 3—For which it can more than 6
Size and type of glove; use at voltage be used months.
Maximum working potential in not exceeding Gloves issued
Volts, 7 500 ac rms 2) Other for occasional
followed by the word ‘working’ Type 4—For precautions to use shall be re-
in brackets; use at voltage be taken while tested after
Identification of the source of not exceeding working on use or in any
manufacture; and 17 000 ac rms. electrical case at
Month and year of installation intervals of not
manufacture more than 12
moisture absorption certificate to months.
be checked. Gloves
Showing any
A Typical specimen of marking defects
As per
Manufactures
Manufacture Name recommendati
ons
Test Potential
Size
SN Activity Required PPEs Quality assurance Protection Limitation Hazard of Not wearing of PPE When to be
(Pictorial Display) discard
Against hazard of PPE
9 Electrical works :
Electrical sub-
Helmet as per
EN 397
Please refer (I) on page 12 & 13 Please refer
(I) on page 12
station current and 13
carrying equipment
Contd
Guidelines on Personal Protective Equipment (PPE)
SN Activity Required PPEs Quality assurance Protection Limitation Hazard of Not wearing of PPE When to be
(Pictorial Display) discard
Against hazard of PPE
III) Goggles
Please refer (III) on page 16 Please refer
(III) on page
16
Guidelines on Personal Protective Equipment (PPE)
Required PPEs Quality assurance Protection Limitation Hazard of Not wearing of PPE When to be
Against hazard of PPE discard
Activity
(Pictorial Display)
10
Working with possibility of
IV) Gloves
Please refer (IV) on page 17 Please refer (IV)
on page 17
splashes of hot, cryogenic or Alternative -I : Hand
corrosive liquids. Contd gloves - involving high
pressure as per EN
388 and 374
Alternative - II
Please refer (IV) on page 18 Please refer (IV)
on page 18
Gloves as per IS 6994.
Light Abrasion ix of table 2
SN Activity Required PPEs Quality assurance Protection Limitation Hazard of Not When to be
(Pictorial Display) Against hazard of PPE wearing of PPE discard
Working with
possibility of
V) Apron
Please refer (VI) on page 22 &23 Please refer
(VI) on page
splashes of hot, Alternative -I Apron as 22 &23
cryogenic or per EN 13982
corrosive liquids
Contd
SN Activity Required PPEs Quality assurance Protection Limitation Hazard of Not When to be
(Pictorial Display) Against hazard of PPE wearing of discard
PPE
11 Welding and cutting work I) Helmet attachable welding a) Helmet mountable welding shield. Protection Exceeding
shield (A) Conforms to EN 175 during To be used only one year
Protective lens made of clear high welding. in conjunction from the
with safety date of
impact resistant. polycarbonate
Liftable helmet & first use
conforming to EN 166 and ANSI Z 87.1 should not be of the
welding lens
polypropylene Impact Resistance Shell used goggles .
allows clear
conform to EN 175 F view while independently. sign of
The welding shield shall be CE marked restricting crack /
harmful dust However damage
Marking on protective shall be fully
particles. welding helmets on lenses
visible can be used Excessive
Ocular marking shall be as per clause independently. wear
9.2 of EN 166 As per
b) Welding Helmet with welding Shield Manufact
II) Welding Helmet with welding Protective lens made of clear high ures
Shield (B) impact resistant. polycarbonate recomme
conforming to EN 166 and ANSI Z 87.1 ndations
polypropylene Impact Resistance Shell
conform to EN 175 F
Marking on protective shall be fully
visible
Ocular marking shall be as per clause
9.2 of EN 166
Name of Manufacture
SN Activity Required PPEs Quality assurance Protection Limitation Hazard of Not When to be discard
(Pictorial Display) Against hazard of PPE wearing of PPE
11 Welding and cutting work III) Apron Apron shall conform to EN minimize Additional electrical On contaminated with
Contd. ISO 11611 & shall have skin burns insulation layers will be flammable material.
the following markings : caused by required where there is an
sparks, increased risk of electric Manufacturers shall
classification: :
spatter, or shock; garments meeting the include the
Class 1: the number and
radiation requirements of clause of en information that
year of this International ISO 11611 ( 6.10) are welder’s protective
Standard (ISO 11611) designed to provide clothing be cleaned
followed by the graphical protection against short term, regularly in
symbol shown in below accidental contact with live accordance with the
and the indication “Class electric conductors at manufacturer’s
voltages up to approximately recommendations.
1” and the indication “A1”
100 V d.c. After cleaning, the
or “A1 + A2” as
any identified hazards against clothing shall be
appropriate for Limited which the clothing is visually inspected for
Flame Spread; intended to protect (e.g. any sign of damage.
Class 2: the number and flames, molten metal spatter, Similarly, users should
year of this International radiant heat, and short term be advised that if they
Standard (ISO 11611) accidental electrical experience sunburn-
contact); for protective like symptoms, UVB is
followed by the graphical
clothing, a warning that penetrating.
symbol shown in Figure 1 additional partial body In either case, the
and the indication “Class protection may be required, garment should be
2” and the indication “A1” e.g. for welding overhead; repaired (if
A Typical specimen or “A1 + A2” as practicable) or
of marking appropriate; garments replaced and
conforming to Class 2 shall consideration given to
meet Class 2 for all the use of additional,
more resistant,
EN ISO Number performance
protective layers in
requirements; future.
instructions for cleaning
shall be marked (e.g. on a As per Manufactures
Class marking label). recommendations
Guidelines on Personal Protective Equipment (PPE)
SN Activity Required PPEs Quality assurance Protection Limitation Hazard of Not wearing of PPE When to be
(Pictorial Display) discard
Against hazard of PPE
SN Activity Required PPEs Quality assurance Protection Limitation Hazard of Not When to be discard
Against hazard of PPE wearing of PPE
(Pictorial Display)
Alternative - II
Please refer (IV) on page 18 Please refer (IV) on page
18
Gloves as per IS 6994.
SN Activity Required PPEs Quality assurance Protection Limitation Hazard of Not wearing of PPE When to be
Against hazard of PPE discard
(Pictorial Display)
III) Goggles
Please refer (III) on page 16 Please
refer (III)
on page 16
Guidelines on Personal Protective Equipment (PPE)
SN Activity Required PPEs Quality assurance Protection Limitation Hazard of Not wearing of PPE When to be
Against hazard of PPE discard
(Pictorial Display)
Alternative - II
Please refer (IV) on page
Gloves as per IS 6994. 18
Light Abrasion ix of table 2