Alarm Viewer Activex Control in The Same Screen With Device Wizar
Alarm Viewer Activex Control in The Same Screen With Device Wizar
Alarm Viewer ActiveX control in the same screen with device wizar
Home subject: Use of Alarm Viewer ActiveX control in the same screen with EMVT-D, EMVT-C, ML239, ML735
Wizards.
Product
Information The CIMPLICITY Alarm Viewer OCX can be inserted in the same screen as the device wizards.
However if the Alarm viewer OCX is included in the same screen with the above-mentioned
Case Studies wizards, one of the procedure in the wizards starts giving an error due to a conflicting variable nam
The solution to this problem is explained below
FAQs 1. Open CimEdit from the configuration cabinet of your project.
Download Area
2. Click on the Object Explorer button on the toolbar.
'Virtual' Demo
3. Get to the tree on the left to PMCS WIZARDS\Tabular-Large Faceplate\Trip Units
Glossary of
4. Select EMVT-C wizard and double click on it.
Terms
5. The wizard gets inserted in the CimEdit Screen
Links
6. Double click on the object to open the CimEdit native property pages for the wizard.
Contact Us
7. Select the ‘Frames’ tab and expand the ‘Tabular data sheet frame’ by clicking the + button.
Search
8. Right click the mouse button and select ‘Properties’ for the ‘Name plate’ group.
12. Replace in the variable ‘resource’ with ‘res’ throughout the script.
http://genet.edc.ge.com/systems/Technote/note66.htm 5/27/99
GE PMCS App Note 66 Page 2 of 2
16. Repeat steps 5 to 15 for EMVT-D after double clicking on EMVT-D in Object Explorer.
Legal Disclaimer
http://genet.edc.ge.com/systems/Technote/note66.htm 5/27/99