Scribd Logo
Upload

Welcome to Scribd!

  • 61 views

    Jupiter: Testing For High Voltage Cable

    Uploaded by

    Mohamed Hasham Hussain
    1) The document describes test results for a 3CX240 SQMM XLPE cable between substations GHT-090 and GHT-129. 2) Phase identification, insulation resistance, and high voltage tests were performed and results were within acceptable limits. 3) Equipment used included a Megger insulation tester, Fluke multi-meter, and B2 high voltage test kit. All equipment was properly calibrated.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Flag for inappropriate content

    Jupiter: Testing For High Voltage Cable

    Uploaded by

    Mohamed Hasham Hussain
    61 views2 pages
    1) The document describes test results for a 3CX240 SQMM XLPE cable between substations GHT-090 and GHT-129. 2) Phase identification, insulation resistance, and high voltage tests were performed and results were within acceptable limits. 3) Equipment used included a Megger insulation tester, Fluke multi-meter, and B2 high voltage test kit. All equipment was properly calibrated.

    Original Description:

    Original Title

    11KV CABLE VLF 12 S 01

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1) The document describes test results for a 3CX240 SQMM XLPE cable between substations GHT-090 and GHT-129. 2) Phase identification, insulation resistance, and high voltage tests were performed and results were within acceptable limits. 3) Equipment used included a Megger insulation tester, Fluke multi-meter, and B2 high voltage test kit. All equipment was properly calibrated.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as doc, pdf, or txt
    61 views2 pages

    Jupiter: Testing For High Voltage Cable

    Uploaded by

    Mohamed Hasham Hussain
    1) The document describes test results for a 3CX240 SQMM XLPE cable between substations GHT-090 and GHT-129. 2) Phase identification, insulation resistance, and high voltage tests were performed and results were within acceptable limits. 3) Equipment used included a Megger insulation tester, Fluke multi-meter, and B2 high voltage test kit. All equipment was properly calibrated.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as doc, pdf, or txt
    of 2

    Jupiter EMC LLC Electro Mechanical Contractors

    TESTING FOR HIGH VOLTAGE CABLE


    Client ADDC Date 16/06/2020
    Consultant AAW Contractor KEC
    Contract No D-105686 W.Order No AD/KEC/M-722/861

    CABLE DSECRIPTION
    Length
    Make Type Size Rated Volt Service Volt CKT NO
    Approx.
    NATIONAL 3CX240
    XLPE 12kV 11kV 12 S 01 1290 M
    CABLE SQMM

    CABLE ROUTE
    From GHT-090 To GHT-129

    PHASE IDENTIFICATION TEST

    PHASE CONDITION (ONE END) MEASUREMENT (OTHER END) RESULT


    R R R-phase earthed at one end Checked continuity at other end OK
    Y Y Y-phase earthed at one end Checked continuity at other end OK
    B B B-phase earthed at one end Checked continuity at other end OK

    INSULATION RESISTANCE TEST

    Phase Condition Voltage Duration Before HV Test After HV Test Remarks


    R-E Y+B+E 88.6 GΩ 95.2 GΩ OK
    Y-E R+B+E 5 KV-DC 1 MINUTE 98.8 GΩ 100.7 GΩ OK

    B-E Y+R+E 88.6 GΩ 98.0 GΩ OK

    ------------- TESTED BY CONTRACTOR CONSULTANT APPROVED BY


    COMPANY NAME JUPITER EMC LLC KEC AAW ADDC
    ENGINEER NAME USMAN
    SIGNATURE

    Tel : 02-6419541 , Fax : 02-6419542 E-Mail : [email protected]


    Page 1 of 2
    Jupiter EMC LLC Electro Mechanical Contractors

    HIGH VOLTAGE TEST

    Leakage Current (milli-Amps)


    Applied Applied
    Condition Minutes Remarks
    Voltage Phase
    wave Hz 1 5 10 15
    R Y+B+E Sine 0.1 1.010 1.010 1.010 1.010 WITH STAND
    19 KV Peak Y R+B+E Sine 0.1 1.010 1.010 1.010 1.010 WITH STAND
    B Y+R+E Sine 0.1 1.010 1.010 1.010 1.010 WITH STAND
    Capacitance R: 595.0 nF Y: 595.0 nF B: 595.0 nF
    Resistance R: >20 GΩ Y: >20 GΩ B: >20 GΩ

    EQUIPMENTS USED

    Equipment Name Make Serial no Calibration due date


    Insulation Tester Megger 101856457 29.08.2020
    Multi-Meter Fluke 95630174 14.05.2021
    VLF High Voltage Kit B2 GH5209.19A021 05.11.2020

    ------------- TESTED BY CONTRACTOR CONSULTANT APPROVED BY


    COMPANY NAME JUPITER EMC LLC KEC AAW ADDC
    ENGINEER NAME USMAN
    SIGNATURE

    Tel : 02-6419541 , Fax : 02-6419542 E-Mail : [email protected]


    Page 2 of 2

    You might also like