This document provides instructions for adding an eSIM cellular plan to an iPhone XS, XS Max, or XR that already has a physical nanoSIM installed. It outlines the steps to scan a QR code to register the eSIM, set it as the primary or secondary line, and label the cellular plans. It also explains how to remove a cellular plan if it is no longer needed.
This document provides instructions for adding an eSIM cellular plan to an iPhone XS, XS Max, or XR that already has a physical nanoSIM installed. It outlines the steps to scan a QR code to register the eSIM, set it as the primary or secondary line, and label the cellular plans. It also explains how to remove a cellular plan if it is no longer needed.
This document provides instructions for adding an eSIM cellular plan to an iPhone XS, XS Max, or XR that already has a physical nanoSIM installed. It outlines the steps to scan a QR code to register the eSIM, set it as the primary or secondary line, and label the cellular plans. It also explains how to remove a cellular plan if it is no longer needed.
This setting can apply to iPhone XS, XS Max and XR or iPhone model that supports eSIM
1. On main screen, tap (Settings) while setting 2. Tap (Cellular)
iPhone shold be able to connect to the internet either via SIM or Wi-Fi 3. CELLULAR PLANS: Prepaid = prepaid nanoSIM, Ex. make nanoSIM to eSIM (Prepaid is named) Primary = previous eSIM Add Cellular Plan: tap here to add eSIM 4. Rear camera will open to be ready for scaning QR Code of eSIM 5. Prepare the document from True Shop (or any channel), notice there’ll be QR Code for scanning 6. Use your iphone to scan the QR code, 7. When completed eSIM registration, (Add afterwards system will register and activate Cellular Plan) will appear to label default eSIM > wait around 1 – 2 minutes, during line and and Cellular data, tap (Add this process iPhone should be able to Cellular Plan) if don’t want to set up, tap connect to the internet (Cancel) 8. Cellular Plan Lables: tap to label the default line, you can use the default name or manually enter name 9. Labels on device : Default name If want to set it, at (CUSTOM LABEL), type your label 10. When finished, tap (Continue) 11. (Default Line) screen Set your default number, which iMessage and FaceTime use and which you will use when you call or send a message to someone who isn't in your Contacts app. On this screen, choose a number to be your default number, or you can choose which number is to be used only for cellular data. Your other number will be your default. Use “Prepaid” as your default line : If you select this option, "Prepaid" will be used by default for voice, SMS, Data, iMessage, and FaceTime. Secondary will be available just for voice and SMS. => Example choose this option Use “Secondary” as your default line : If you select this option, Secondary will be used for voice, SMS, Data, iMessage, and FaceTime. "Prepaid" will be available just for voice and SMS. Use “Secondary” for cellular data only : You might want to select this option if you're traveling internationally and you want to keep "Prepaid" for voice, SMS, iMessage, and FaceTime. This will allow you to use Secondary for data. 12. Back to (Cellular) at (CELLULAR PLANS) Prepaid = nanoSIM Use as “Primary = old eSIM : status = OFF – because now is using new eSIM of Prepaid Secondary = new eSIM 13. If removed nanoSIM, notice “Prepaid” will 14. To erase Cellular plan for example, nanoSIM show status = No SIM “Prepaid” is no longer used, to remove it, tap “Prepaid” 15. It’ll show (Cellular Plan No Longer 16. “Prepaid” will disappear, now there’re only Available), tap (Update Contacts) to erase it two eSIM numbers 17. Go to (Settings) > (General) > (About) > scroll down PHYSICAL SIM = show only IMEI of iPhone, no nanoSIM SECONDARY = information of Secondary SIM : now Secondary is eSIM eSIM of “Primary” wil not show because it has not been used Carrier / ICCID / MEID / Network will show when insert nanoSIM or choose to use that eSIM
Information about Dual SIM with eSIM on Apple website: EN / TH