Scribd Logo
Upload

Welcome to Scribd!

  • 2K views

    Expansion Joint (BOQ Specs)

    Uploaded by

    Varunn Vel
    The document is a bill of quantities (BOQ) for expansion joint systems at a construction site in Purnea, Bihar. It specifies providing and installing expansion joints for floors, walls, and roofs with gaps of 275mm, 120mm, and 110mm. The floor joints require 150m of 275mm gaps, 64m of 120mm gaps, and 40m of 110mm gaps. Wall joints require 170m, 84m, and 105m of each gap size respectively. Roof joints require 25m, 14m, and 18m of each gap size. The expansion joint systems must be aluminum based and allow for multi-directional movement to accommodate seismic activity.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content

    Expansion Joint (BOQ Specs)

    Uploaded by

    Varunn Vel
    2K views2 pages
    The document is a bill of quantities (BOQ) for expansion joint systems at a construction site in Purnea, Bihar. It specifies providing and installing expansion joints for floors, walls, and roofs with gaps of 275mm, 120mm, and 110mm. The floor joints require 150m of 275mm gaps, 64m of 120mm gaps, and 40m of 110mm gaps. Wall joints require 170m, 84m, and 105m of each gap size respectively. Roof joints require 25m, 14m, and 18m of each gap size. The expansion joint systems must be aluminum based and allow for multi-directional movement to accommodate seismic activity.

    Original Description:

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    The document is a bill of quantities (BOQ) for expansion joint systems at a construction site in Purnea, Bihar. It specifies providing and installing expansion joints for floors, walls, and roofs with gaps of 275mm, 120mm, and 110mm. The floor joints require 150m of 275mm gaps, 64m of 120mm gaps, and 40m of 110mm gaps. Wall joints require 170m, 84m, and 105m of each gap size respectively. Roof joints require 25m, 14m, and 18m of each gap size. The expansion joint systems must be aluminum based and allow for multi-directional movement to accommodate seismic activity.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    2K views2 pages

    Expansion Joint (BOQ Specs)

    Uploaded by

    Varunn Vel
    The document is a bill of quantities (BOQ) for expansion joint systems at a construction site in Purnea, Bihar. It specifies providing and installing expansion joints for floors, walls, and roofs with gaps of 275mm, 120mm, and 110mm. The floor joints require 150m of 275mm gaps, 64m of 120mm gaps, and 40m of 110mm gaps. Wall joints require 170m, 84m, and 105m of each gap size respectively. Roof joints require 25m, 14m, and 18m of each gap size. The expansion joint systems must be aluminum based and allow for multi-directional movement to accommodate seismic activity.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 2

    NCC Limited

    Site :: GMC Purnea (Bihar)

    Annexure to PR No. Dated: 28.10.2020

    Sl.No BOQ Specification Unit Quantity Remarks

    Providing and fixing of expansion joint system related with floor location as per
    drawings and direction of Engineer-In-Charge. The joints system will be of extruded
    aluminum base members, self aligning / self centering arrangement and support
    plates etc. as per ASTM B221-02. The system shall be such that it provides floor to
    floor /floor to wall expansion control system for various vertical localtion in load
    application areas that accommodates multi directional seismic movement without
    stress to it's components. System shall consist of metal profiles with a universal
    aluminum base member designed to accommodate various project conditions and
    1 finish floor treatments. The cover plate shall be designed of width and thickness
    required to satisfy projects movement and loading requirements and secured to base
    members by utilizing manufacturer’s pre-engineered selfcentering arrangement that
    freely rotates / moves in all directions. The Self – centering arrangement shall exhibit
    circular sphere ends that lock and slide inside the corresponding aluminum extrusion
    cavity to allow freedom of movement and flexure in all directions including vertical
    displacement. Provision of Moisture Barrier Membrane in the Joint System to have
    watertight joint is mandatory requirement all as per the manufactures design and as
    approved by Engineer -in-Charge .(Material shall confirm to ASTM 6063).

    (i) Floor Joint of 275 mm gap Meter 150.00

    (ii) Floor Joint of 120 mm gap Meter 64.00

    (iii) Floor Joint of 110 mm gap Meter 40.00

    Providing and fixing of expansion joint system related with wall joint (internal/external)
    location as per drawings and direction of Engineer-In-Charge. The joints shall be of
    extruded aluminum base members, self aligning / centering arrangement and support
    plates as per ASTM B221-02. The material shall be such that it provides an
    Expansion Joints System suitable for vertical wall to wall/ wall to corner application,
    2
    both new and existing construction in office Buildings & complexes with no slipping
    down tendency amongst the components of the Joint System. The Joint System shall
    utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces
    mechanically snap locking the multicellular to facilitate movement. (Material shall
    confirm to ASTM 6063).

    (i) Wall Joint of 275 mm gap Meter 170.00

    (ii) Wall Joint of 120 mm gap Meter 84.00

    (iii) Wall Joint of 110 mm gap Meter 105.00


    Sl.No BOQ Specification Unit Quantity Remarks

    Providing and fixing of expansion joint system of approved make and manufactures
    for various roof locations as per approved drawings and direction of Engineer-In-
    Charge. The joints shall be of extruded aluminum base members with, self aligning
    and self centering arragement support plates asper ASTM B221-02. The system shall
    be such that it provides watertight roof to roof/roof to corner joint cover expansion
    control system that is capable of accommodating multidirectional seismic movement
    without stress to its components. System shall consist of metal profile that
    incorporates a universal aluminum base member designed to accommodate various
    project conditions and roof treatments. The cover plate shall be designed of width and
    3 thickness required to satisfy movement and loading requirements and secured to
    base members by utilizing manufacturer’s preengineered self-centering arrangement
    that freely rotates / moves in all directions.The Self centering arrangement shall
    exhibit circular sphere ends that lock and slide inside the corresponding aluminum
    extrusion cavity to allow freedom of movement and flexure in all directions including
    vertical displacement. The Joint System shall resists damage or deterioration from the
    impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic
    from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint
    System to have water tight joint is mandatory requirement. Material shall confirm to
    ASTM 6063.

    (i) Roof Joint of 275 mm gap Meter 25.00

    (ii) Roof Joint of 120 mm gap Meter 14.00

    (iii) Roof Joint of 110 mm gap Meter 18.00

    List of Makes : Sanfield/M.M Systems/Mapei/Balco India/Z-tech/The Supreme Industries Ltd./Construction Specialities


    (USA)/Vexcolt International Ltd./Deevin/Hercules/V.R Engineers.

    You might also like