Professional Documents
Culture Documents
Gypsum E Book
Gypsum E Book
INTRO
About FEECO...................................................................................................................................1
Intro to Gypsum..................................................................................................................................... 3
PROCESSING
Gypsum Material Characteristics................................................................................................................................8
Gypsum Pelletizing............................................................................................................................................................ 9
Drying Gypsum.....................................................................................................................................................................13
CONSIDERATIONS
Challenges in Processing Gypsum.....................................................................................................................................19
Additional Resources...........................................................................................................................................................23
Introduction
FEECO International was founded in 1951 as an engineering and manufacturing company. We quickly became
known as the material experts, able to solve all sorts of material processing and handling problems, and now
serve nearly every industry, from energy and agriculture, to mining and minerals.
As experts in the fields of particle size enlargement and thermal processing, FEECO has been an expert in
gypsum processing since the 1950s. We’ve helped our customers process hundreds of materials into value-added
products, eliminating handling and transportation problems, improving product characteristics, and creating
marketable products.
For further information on our gypsum processing capabilities, contact a FEECO expert today.
FEECO US Headquarters
3913 Algoma Rd. Green Bay, WI 54311, USA
Phone: (920)468.1000
Fax: (920)469.5110
FEECO.com/contact
Find us on:
DISCLAIMER
FEECO is committed to publishing and maintaining this Handbook. As we continue to grow and evolve, information in this document is subject to change with-
out notice. FEECO does not make any representations or warranties (implied or otherwise) regarding the accuracy and completeness of this document and
shall in no event be liable for any loss of profit or any commercial damage, including but not limited to special, incidental, consequential, or other damage.
Please note that some images may display equipment without the proper safety guards and precautions. This is for photographic purposes only and does not
represent how equipment should be properly and safely installed or operated. FEECO shall not be held liable for personal injuries.
An Overview of
GYPSUM
INTRO| SYNTHETIC GYPSUM | GYPSUM RECYCLING
These additional types of synthetic gypsum include:1 gypsum in a number of applications. Examples of
products that utilize synthetic gypsum include:
• Citrogypsum, a by-product of citric acid
• Cement
manufacturing
• Drywall
•
Fluorogypsum, a by-product of hydrofluoric acid • Glass Manufacturing
manufacturing • Plaster
• Soil Amendments
•
Phosphogypsum, a by-product of phosphoric
acid manufacturing BENEFITS TO USING SYNTHETIC GYPSUM
Manufacturing synthetic gypsum creates many
• Titanogypsum, a by-product of titanium positive economic and environmental benefits.
dioxide manufacturing Economically, manufacturing synthetic gypsum
creates revenue from a product that otherwise
FGD GYPSUM IS CREATED AT POWER PLANTS
incurred waste management costs. And by creating
FGD gypsum is formed when fossil-fueled power plants
a valuable product from waste, material is kept out
utilize flue gas desulfurization systems to remove sulfur
of landfills and environmental pollution is reduced.
dioxide from gas pollutants. Using a process referred to
Furthermore, increased use of synthetic gypsum
as ‘scrubbing,’ gas pollutants are fed through calcium
conserves natural gypsum and reduces the need to
carbonate to eliminate impurities and environmental
mine finite resources. Synthetic gypsum products even
concerns. When the sulfur dioxide is removed, the
have benefits over natural gypsum products in terms
gypsum by-product is formed.
of costs and environmental impacts.
COMMON USES FOR SYNTHETIC GYPSUM
Synthetic gypsum is used interchangeably with natural
Each year, more and more gypsum manufacturers gypsum waste originates from gypsum board-related
are discovering the benefits of gypsum recycling. products and manufacturing. Plaster and gypsum
Not only is gypsum fully recyclable, but it is also blocks also contribute to gypsum waste, but to a
sustainable throughout its entire life cycle. Gypsum much lesser degree. According to the EPA,2 sources
recycling results in emission reductions, processing of gypsum board waste (and their associated total
Additionally, lead and asbestos contamination excellent fertilizer and soil amendment. Not only does
concerns associated with older buildings are also a gypsum loosen compacted soils, but it also increases
recycling issue. water filtration and adds nutrients such as calcium
and sulfur back into the soil, making it essential when
GYPSUM MANUFACTURING WASTE (12%): Gypsum promoting sustainability in irrigated soils.
manufacturing waste is a result of rejected material
NEW DRYWALL: Many gypsum manufacturers utilize
created during the manufacture of gypsum products.
gypsum recycling as a material source for new boards.
Most gypsum manufacturing plants recycle this waste
Because of gypsum’s sustainable qualities, new
stream as part of their waste avoidance protocol.
products containing recycled gypsum are of the same
quality as gypsum boards produced using only raw
PROCESSING GYPSUM WASTE
materials.
Closed-loop gypsum board recycling begins when
construction site waste is brought to a recycling center CEMENT: Gypsum is used as an ingredient in cement
for processing. The recycling center separates the manufacturing, providing benefits such as reduced
paper from the gypsum and breaks down the gypsum setting time.
into a fine powder. The gypsum powder is then ready
to be used in recycled gypsum products. Additionally, PAPER PRODUCTS: Recycled paper waste from gypsum
the screened paper is sorted and processed based on boards can be used in agriculture, animal bedding,
Whether raw, natural, synthetic, or even recycled, it is much easier to handle than its raw, powdered
often desirable to further process gypsum before use, counterpart. However, clumping and dusting issues
particularly in the case of agricultural applications. may occur when drying and pelletizing powdered
gypsum. In order to avoid such problems, processing
Mined gypsum is a somewhat abrasive material. methods will deliver the necessary results. This is true
As a result, robust equipment must be used when of synthetic gypsum as well. Even more so than
processing gypsum. Rotary dryers are an ideal solution natural gypsum, synthetic gypsum requires testing to
for many types of ore, as they are especially heavy- determine the best processing methods for this unique
3
8
Oversize
7 6 Product
Undersize
GYPSUM PELLETIZING
Whether natural or synthetic, gypsum is commonly pelletized for
improved handling and use. While not typically pelletized for use DIAGRAM KEY:
in the construction industry, gypsum is almost always pelletized for
1. Pin Mixer
agricultural applications, as well as for some others too.
2. Disc Pelletizer
3. Liquid Spray System
PELLETIZING GYPSUM FOR USE 4. Transfer Conveyor
AS A SOIL CONDITIONER 5. Rotary Dryer
Gypsum is an ideal agricultural resource because it improves the 6. Vibrating Screen
properties of soil and promotes optimal crop growth. In addition to the 7. Oversize Mill
8. Surge Hopper
benefits created from pelletizing gypsum, there are many advantages
to regularly using gypsum for agricultural purposes:
While pin mixers are not always used, systems that employ
a pin mixer will enjoy a higher throughput, use less binder,
and yield more on-size pellets. In processes where this FEECO Rotary Dryer
preconditioning step is not utilized, crushed gypsum is fed
directly onto a disc pelletizer and binder is applied.
THE ROTARY DRYER, or gypsum dryer, accomplishes screened by size. Under-size pellets go back into
the final treatment of the gypsum pellets, drawing the process as feedstock, while over-size pellets are
moisture out of the material, while producing a crushed and added back into the process as recycle.
uniform, high-quality product. The rotating motion Optimally sized gypsum moves on to bagging, storage,
and lifting flights of the drum are designed to shower or transport. A hammer mill—a size reduction device—
gypsum pellets through the air stream, ensuring all of is frequently used for crushing over-size granules so
the pellets are properly dried. they can be worked back into the process as recycle.
achieve proper pellet strength. A binder assists in pellet in both cases, drying helps to create a uniform,
formation, and also helps to create an end product premium product.
with the desired crush strength. When it comes to pel-
letizing gypsum, lignosulfonate is the most commonly DRYING MINED GYPSUM
used binding agent. If only water were to be used as a After gypsum ore is extracted from mines or quarries,
binder, the resulting pellets would be weak. it is crushed and stockpiled as needed. If the gypsum
ore does not meet specified moisture levels, it must
Quality equipment is a must in order to produce the rotary dryer, is used to reduce the moisture content of
best pelletized gypsum product. Equipment designed the ore to the necessary level. The heavy-duty, high-
around the unique processing requirements of volume functionality of a rotary dryer makes it an ideal
gypsum, instead of a one-size-fits-all approach, will drying solution for gypsum. In addition, the lifting flights
produce the best results. Additionally, modifications within the rotating drum shower the gypsum through
to accommodate the rigors of gypsum processing a heated air stream, uniformly drying the material
are often necessary—for example, abrasion-resistant as it travels through the dryer, as well as increasing
moisture is added during the conditioning and dryers, all of which aim to maximize efficiency during
pelletizing steps, the moisture must be drawn out to gypsum processing, as well as prolong the life of the
cure the pellet into its final, dry form. As previously equipment. Among them:
mentioned, this is most commonly carried out using a • Abrasion-resistant internal flights
rotary dryer. Benefits include:
• Heavy-duty linings to protect against abrasion
A PIN MIXER TO A GYPSUM pre-blended in a pin mixer, end crush strength is much
IMPROVED BLENDING
REDUCED BINDER USAGE
Because a disc pelletizer is not intended to mix
Because pin mixers use motion to create densification
materials on the pan, often the distribution of binder
instead of binder, less binder is often required, translat-
throughout the material can be uneven. Adding a pin
ing into reduced binder costs.
mixer prior to the pelletizer allows for thorough mixing
of the binder with the material, resulting in more
Pin mixers are also ideal components in an automated
uniform pellets. This is particularly noted in final crush
system, offering precise quality control and accurate
strength; relying on the pan pelletizer to mix the binder
production rates.
can yield varying crush strengths due to uneven
BUCKET ELEVATORS
A bucket elevator may also be used in facilities that FEECO Bucket Elevator
Gypsum’s natural ability to harden and cake into a drying is applied, clumping is minimized, and the
cement-like form makes it difficult to remove from resulting product is easier to handle and store. In
equipment. This can be accentuated if gypsum is addition, rotary dryers can be customized with
dried at too high of a temperature, where molecular knocking systems that work to further reduce
moisture is being removed, resulting in an undesirable lumps within the material while dislodging any
form of gypsum, and then re-exposed to moisture. This gypsum that would otherwise build up inside
Gypsum materials are frequently tested in the FEECO Innovation Center for - Pin Mixer
a variety of reasons. This might include to test the feasibility of a new product - Disc Pelletizer
or idea, enhance the characteristics or performance of an existing product, - Rotary Dryer
improve upon or troubleshoot a process, or even develop a new process. - Screen
- Hammer Mill
Our process experts can work with you to develop a customized testing program - Conveyor
around the answers you’re looking for. Depending on your needs, we offer testing - Bucket Elevator
services in four categories:
Most often, customers are looking to create
1. Feasibility/Proof of Concept - An initial, 2. Proof of Product - A more in-depth a durable pellet capable of breaking down
non-witnessed batch testing phase in batch testing phase in which more time quickly in standard field conditions, while
which the possibility of creating a is spent determining whether a product also counteracting dust and improving
product is explored. can be made to desired specifications. product handling. To achieve this, various
binders are also used during the
agglomeration tests, to create a pellet that
3. Proof of Process - A continuous testing 4. Process/Product Optimization - An
is durable enough to withstand subsequent
phase that aims to establish the equip- in-depth study to optimize your specific
processing and handling.
ment setup and parameters required for material’s characteristics and/or
continuous production of your production parameters in an
specific material. industrial setting. Commonly Tested
Gypsum Materials:
- Gypsum
Processes Commonly Tested:
- Synthetic/FGD Gypsum
- Gypsum Pelletizing - Gypsum Drying
FEECO.com/contact
3913 Algoma Rd. Green Bay, WI 54311, USA • Phone: (920)468.1000 • Fax: (920)469.5110 • FEECO.com/contact THE GYPSUM PROCESSING HANDBOOK | 21
THE INNOVATION CENTER ADVANTAGE
Testing in the FEECO Innovation Center provides an invaluable opportunity to test Commonly Targeted
in a controlled environment, allowing you to gain a familiarity with your material, Material Characteristics:
while reducing the chance for unforeseen problems after process scale-up. Some
- Crush Strength/Hardness
of the many advantages to testing in the FEECO Innovation Center include:
- Abrasion/Attrition
- Material Composition
Material Experience:
- Bulk Density
FEECO has been a pioneer in material processing since the 1950s, and has extensive
knowledge around hundreds of materials and processing methods. - Flowability
- Moisture Content
Customers gain a valuable familiarity with their material and its unique - Green/Wet Strength
characteristics through testing in the Innovation Center. - Sieve Analysis
- Solubility
Complete Process Knowledge:
FEECO is familiar with each aspect of a process, from agglomeration and kiln
processing, to drying and cooling, allowing us to look at how the process will
function as a whole, instead of each individual portion.
Process Scale-up:
Once the process configuration has been defined, FEECO can aid in process
scale-up, as well as manufacturing the equipment needed to get the job done.
A variety of data points can be monitored, trended, and adjusted in real time, all
from a single interface or mobile device.
Historical data is also available for returning customers, allowing you to pick up
exactly where you left off.
SCHEDULE A TEST
To discuss your testing needs with one of our process engineers and schedule a test, contact us today at:
FEECO.com/contact
3913 Algoma Rd. Green Bay, WI 54311, USA • Phone: (920)468.1000 • Fax: (920)469.5110 • FEECO.com/contact
ADDITIONAL RESOURCES
For further information or reading on gypsum, we have provided some additional resources below. Please note
that the inclusion of any resource or company is not an endorsement and the views of that resource do not
reflect those of FEECO International.
Global Gypsum
www.globalgypsum.com/
The choice to work with FEECO means a well-rounded commitment to quality. From initial feasibility testing, to
engineering, manufacturing, and aftermarket services, we bring our passion for quality into everything we do.
FEECO International follows ISO 9001:2015 standards and procedures.
Innovation
The FEECO Innovation Center can
aid in everything from feasibility
testing, to process design and
product development.
+
Aftermarket
Engineering
Our Aftermarket
We engineer custom
Engineering Team is Since 1951 solutions to meet
ready to serve, from
your unique needs.
routine maintenance,
to emergency
service.
Manufacturing
We manufacture the best
heavy-duty processing
equipment around.
FEECO.com/contact
3913 Algoma Rd. Green Bay, WI 54311, USA • Phone: (920)468.1000 • Fax: (920)469.5110 • FEECO.com/contact THE GYPSUM PROCESSING HANDBOOK | 24
For more information on gypsum processing, material testing, custom
equipment, or for help with your gypsum operation, contact FEECO
International today!
FEECO.com/contact