Professional Documents
Culture Documents
Oracle Private Cloud Appliance Installation Specialist Assessment
Oracle Private Cloud Appliance Installation Specialist Assessment
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
: Introduction module and try again
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
: Introduction module and try again
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
: Introduction module and try again
Allow to manage all software licenses by virtual cpus allocated to guest VMs
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
: Introduction module and try again
System firmware can be refreshed with a single package from Oracle Support
website. (*)
Hardware components including Rack, Server, Storage and Switch are selected
and configured carefully. (*)
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
: Introduction module and try again
Fully virtualized system with built-in software defined networking (SDN) for
ultimate flexibility (*)
Out-of-box private cloud solution with easy Enterprise Manager Cloud Control
integration (*)
Previously known as Virtual Compute Appliance which has been evolving for
generations (*)
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
: Introduction module and try again
7. Which statements about PCA Dashboard UI are correct? Mark for Review
(1) Points
Same management functions as PCA Admin CLIs have been implemented in PCA
Dashboard UI.
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: System Installation module and try again.
admin/Welcome1 (*)
ovcaadmin/Welcome1
ovcaadmin/welcome1
admin/welcome1
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: System Installation module and try again.
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: System Installation module and try again.
10. Which URLs can be used to access PCA Dashboard UI during initial
configuration? Mark for Review
(1) Points
http://192.168.4.216/dashboard
http://192.168.4.216/ (*)
https://192.168.4.4:7002/dashboard
https://192.168.4.216:7002/dashboard (*)
https://192.168.4.3:7002/dashboard (*)
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: System Installation module and try again.
Internal Switches
Internal Storage
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: System Installation module and try again.
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: System Installation module and try again.
13. Which tab view in PCA Dashboard UI can be leveraged to monitor hardware
components in Private Cloud Appliance? Mark for Review
(1) Points
Health
Monitoring
System View
Correct Corect!
Resetting passwords must be the first task during initial configuration. (*)
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: System Installation module and try again.
15. Which tasks are NOT expected to be performed during Private Cloud
Appliance initial configuration? Mark for Review
(1) Points
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: System Installation module and try again.
Rack PDUs, Internal Storage, First Management Node, Second Management Node,
Compute Nodes
Rack PDUs, Internal Storage, First Management Node, Second Management Node
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: System Installation module and try again.
Which servers can be used as Admin Servers for the PCA solution? Mark for Review
(1) Points
ovcacn08r1, ovcacn09r1
ovcacn07r1
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: Connect External Storage module and try again.
(4:2) in Fabric Connect A -> Switch A, (5:2) in Fabric Connect A -> Switch B;
(4:2) in Fabric Connect B -> Switch B, (5:2) in Fabric Connect B -> Switch A (*)
(4:2) in Fabric Connect A -> Switch B, (5:2) in Fabric Connect A -> Switch B;
(4:2) in Fabric Connect B -> Switch A, (5:2) in Fabric Connect B -> Switch A
(4:2) in Fabric Connect A -> Switch B, (5:2) in Fabric Connect A -> Switch A;
(4:2) in Fabric Connect B -> Switch A, (5:2) in Fabric Connect B -> Switch B (*)
(4:2) in Fabric Connect A -> Switch A, (5:2) in Fabric Connect A -> Switch B;
(4:2) in Fabric Connect B -> Switch A, (5:2) in Fabric Connect B -> Switch B
(4:2) in Fabric Connect A -> Switch B, (5:2) in Fabric Connect A -> Switch A;
(4:2) in Fabric Connect B -> Switch B, (5:2) in Fabric Connect B -> Switch A
(4:2) in Fabric Connect A -> Switch A, (5:2) in Fabric Connect A -> Switch A;
(4:2) in Fabric Connect B -> Switch B, (5:2) in Fabric Connect B -> Switch B
Correct Corect!
19. Identify storage devices that can be used as external storage resources for a
Private Cloud Appliance deployment? Mark for Review
(1) Points
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: Connect External Storage module and try again.
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: Connect External Storage module and try again.
Forgot to add iSCSI initiators of those Compute Nodes into the LUN mask
configuration of the NAS (*)
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: Connect External Storage module and try again.
NETMGMT
SERMGT
port0 in IB HCA
net0 (*)
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: Connect External Storage module and try again.
The ports (4:3) in IO Modules are selected as uplinks connecting the NAS storage.
Which CLIs must be executed to configure vNICs for servers in the Tenant Group?
Mark for Review
(1) Points
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: Connect External Storage module and try again.
24. When planning storage for a PCA deployment, which resources can
be leveraged to store data for a production Oracle RAC solution in default Tenant
Group? Mark for Review
(1) Points
External iSCSI LUNs which are provisioned to Management Nodes in the PCA
System
External iSCSI LUNs which are provisioned to Guest Domains that will host the
Oracle RAC solution (*)
An OVM Repository that is created from a NFS share which can be mounted on
all server nodes in the PCA System
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: Connect External Storage module and try again.
25. Which configuration rules are correct for connecting ZFS Storage Appliances
with InfiniBand interfaces to a PCA System? Mark for Review
(1) Points
ZFS Storage must be configured with dual controllers, which have a dual-port
IB HCA on each controller. (*)
A PCA System can only connect to limited number of ZFS Storage Appliance with
InfiniBand interfaces. (*)
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: Connect External Storage module and try again.
Cloud B -> Switch 2, Cloud C -> Switch 2, Cloud D -> Switch 1 (*)
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: Connect External Storage module and try again.
FC uplinks from the PCA System are disconnected from external FC switches.
LUN mask configuration in the FC storage prevent the server from accessing
those storage resources. (*)
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: Connect External Storage module and try again.
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: Connect External Storage module and try again.
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: Connect External Storage module and try again.
WWN-based FC Zoning
User-based Access Control
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: Connect External Storage module and try again.
Incorrect Incorrect! Please review the course content and try again.
32. What are the two primary objectives for the Installation
Configuration Planning step of the EIS methodology? Mark for Review
(1) Points
Oracle/Partner and Customer will determine and mutually agree upon the
hardware and software installation requirements which will be documented in the
Installation and Configuration Plan (*)
Tests that will be performed during the Systems Testing will be defined. (*)
Incorrect Incorrect! Please review the course content and try again.
Review the “EISdoc V4 Getting Started Cookbook” and “Success with EISdoc V4
Cookbook” (*)
Review the Openoffice presentation on EISdoc V4 found on the EIS Planning &
Documentation web page
Incorrect Incorrect! Please review the course content and try again.
34. Which four objectives are primary goals for an EIS Site Audit?
Mark for Review
(1) Points
Determine the floor weight load capacity at the location where the System
will be installed (*)
Determine installation needs for the System, including such assessments as:
the suitability of access routes to the installation location, such as doors,
elevators, floor strengths and ramps (*)
Incorrect Incorrect! Please review the course content and try again.
35. What is the main purpose of the EIS methodology? Mark for
Review
(1) Points
Correct Correct!
36. What is found on the EIS-DVD? Select all the apply. Mark for
Review
(1) Points
A complete set all configuration files for every Oracle server, storage
system and Engineered system
Incorrect Incorrect! Please review the course content and try again.
Incorrect Incorrect! Please review the course content and try again.
Incorrect Incorrect! Please review the course content and try again.
Incorrect Incorrect! Please review the course content and try again.
40. What is the primary purpose of the EIS-DVD? Mark for Review
(1) Points
The EIS-DVD is used for on-the-job tutorials on how to install Oracle servers
and storage
Incorrect Incorrect! Please review the course content and try again.
41. Name two functions for the EIS-DVD during the Installation and
Configuration of Oracle Hardware and Software step in the EIS methodology? Mark
for Review
(1) Points
Incorrect Incorrect! Please review the course content and try again.
42. What is the purpose for the Operational Handover step in the EIS
Methodology? Mark for Review
(1) Points
Incorrect Incorrect! Please review the course content and try again.
43. What three documents are typically used as part of the EIS Planning and
Preparation stage in the installation process? Mark for Review
(1) Points
Acclimatization Report
Project Schedule
Incorrect Incorrect! Please review the course content and try again.
44. What should you do if you believe you have found an error in an
EIS checklist? Mark for Review
(1) Points
Follow the feedback method on the last page of every checklist: email
[email protected] (*)
Assume that the EIS team is already aware and the next version of the
checklist will be updated
Correct Correct!
45. What should you do with the EIS checklist when an installation
project is complete? Mark for Review
(1) Points
Remove the EIS checklist and other confidential Oracle Intellectual Property
from the customer datacenter (*)
Post the EIS checklist and Test Procedures Plan to My Oracle Support under
your customer’s account
Leave the EIS checklist with the customer so that they can re-install when
they need to
Correct Correct!
46. What tasks occur during the operational handover phase of the EIS
methodology? Mark for Review
(1) Points
Provide the customer the 20% installation service rebate that is required
after a successful installation
Document the serial number for the system(s) installed, as well as any
comments pertaining to the installation
Incorrect Incorrect! Please review the course content and try again.
47. What are the four key points covered in each test topic of the
Test Procedures Plan? Mark for Review
(1) Points
Prerequisites
Outcome
Objective (*)
Conclusion
Test Result
Method
Incorrect Incorrect! Please review the course content and try again.
Organization of the team who will actively work the Installation (*)
Incorrect Incorrect! Please review the course content and try again.
49. Who is involved in the Project Initiation phase? Mark for Review
(1) Points
Incorrect Incorrect! Please review the course content and try again.
50. Why are EIS deliverables relevant for Partner installations too?
Mark for Review
(1) Points
Advanced Customer Services mandates that Partners use the EIS methodology for
installations
When partners use the EIS deliverables and submit documentation to that
effect, their customer gets a 25% discount on support
EIS deliverables describe the amount of time, materials and deliverables are
in scope for a standard installation (*)
Incorrect Incorrect! Please review the course content and try again.
Prior to the completion of the sale, in order to ensure that the customer’s
location is viable
After the system has been acclimatized and is ready for unpacking at the
customer site
Incorrect Incorrect! Please review the course content and try again.
Move the systems (still packed) into a room with a similar environment to the
data center (*)
Incorrect Incorrect! Please review the course content and try again.
53. What are two activities that take place during the System Test
step of the EIS methodology? Mark for Review
(1) Points
Tests specified in the Test Procedures Plan Plan will be carried performed
Incorrect Incorrect! Please review the course content and try again.
54. Which two EIS documents are most useful during the Installation
and Configuration of Oracle Hardware and Software step? Mark for Review
(1) Points
EIS Checklist
Site-Audit Report
DVD
Incorrect Incorrect! Please review the course content and try again.
55. What are two statements that are true about EIS checklists? Mark for Review
(1) Points
EIS installation checklists are intended to guide the installer through the
installation in a logical and consistent manner (*)
Checklists are intended as guidelines for properly trained installers and are
NOT a substitute for appropriate product training.
Checklists are a valuable tool to share with customers so they know how to
install systems themselves
Incorrect Incorrect! Please review the course content and try again.
System Documentation
Incorrect Incorrect! Please review the course content and try again.
57. What are three items in the EIS Site-Audit Report are documented
for all Oracle hardware? Mark for Review
(1) Points
IP Address requirements
If the temperature is below 60 degrees F., warm the room first before power
ON
If qualified personnel did not test the safety of the modified system then
proper testing should be requested before Oracle and/or partner personnel will work
on the equipment
Determine whether the local electrician can support the installation process
Incorrect Incorrect! Please review the course content and try again.
59. Which three responses are true regarding EISdoc v4? Mark for
Review
(1) Points
60. Which three statements are true about EIS? Mark for Review
(1) Points
EIS is a methodology designed to address issues before, during and after the
actual hands-on installation of Oracle systems (*)
EIS is a quick and dirty process for expediting Oracle system installations
EIS evolved from the field, is sustained by those closely involved with the
field, and is intended to assist the field (*)
Incorrect Incorrect! Please review the course content and try again.
61. What if the customer has their own labeling methodology that differs from the
recommended one from EIS? Mark for Review
(1) Points
Submit a Service Request for Oracle approval on use of the customer labeling
and routing methods
Follow the customer's standard for cable labeling provided it meets with EIS
requirements for identification and port location. (*)
Incorrect Incorrect! Please review the course content and try again.
Correct Correct!
63. Why do the EIS Standards recommend that external cables between
Oracle hardware, such as servers, storage devices, network devices and ports be
clearly labeled? Mark for Review
(1) Points
Service requests for field diagnostics will not be accepted unless cables are
labeled
Cable routing should be done with rubber bands for ease of reconfiguration
Incorrect Incorrect! Please review the course content and try again.
64. What four tasks are typically happening at the EIS Planning and
Preparation stage in the installation process? Mark for Review
(1) Points
Incorrect Incorrect! Please review the course content and try again.
EIS deliverables describe detailed process steps for each phase of the
installation service
EIS deliverables are the documents that are left behind with customers after
an installation service is performed
EIS deliverables give a high level description of the scope of the EIS
activities for each product or product family (*)
EIS deliverables are the Customer Support Identifiers that customers use for
field delivery service after an installation has completed
Incorrect Incorrect! Please review the course content and try again.
66. What three typical activities are done during the Project
Initiation phase of the EIS Methodology? Mark for Review
(1) Points
Details about the project are identified and documented, for example, is this
a single system installation or a complex, multi-product installation (*)
Incorrect Incorrect! Please review the course content and try again.
67. Why should you typically complete the Installation Configuration Plan and
create your Test Procedures Plan at the same time? Mark for Review
(1) Points
As you work through the system configuration process with your customer, you
should state how you will test key items in the system’s configuration for having
been successfully completed. (*)
You should create the Test Procedures Plan after you have completed the
system installation and configuration.
Correct Correct!
Powering ON the system will speed the acclimatization process as the heat
from the system will accelerate its warming
Incorrect Incorrect! Please review the course content and try again.
Incorrect Incorrect! Please review the course content and try again.
70. Why should you use the EIS methodology to guide your installation
process? Mark for Review
(1) Points
Installation processes are very lengthy, the EIS methodology is quick and
dirty
Correct Correct!
Incorrect Incorrect! Please review the course content and try again.
72. Name three of the problems that EIS was created to overcome?
Mark for Review
(1) Points
Incorrect Incorrect! Please review the course content and try again.
cleanliness
temperature (*)
humidity
timezone
data center space
Incorrect Incorrect! Please review the course content and try again.
To use a methodology for support service that is from the field, created by
the field for the Field.
Correct Correct!
75. Which Oracle products are covered by EIS Checklists – select all
that apply. Mark for Review
(1) Points
Engineered Systems
Servers (*)
ERP applications
Storage
Switches
Incorrect Incorrect! Please review the course content and try again.
76. When should you review deliverables and why? Mark for Review
(1) Points
EIS deliverables are an interim checklist to ensure that at the mid-way point
of an installation the project remains on track.
EIS deliverables are included in the Oracle system shipping and packaging
documents near the start of an installation
Correct Correct!
77. What are Oracle Standard System Installations (OSSI)? Mark for
Review
(1) Points
Correct Correct!
Testing above and beyond the Covered System Tests are at the sole discretion
of Oracle and/or the Partner installer
Additional tests can be inserted into the Test Procedures plan (*)
Incorrect Incorrect! Please review the course content and try again.
79. Which statements about installing ASR Manager software for Private Cloud
Appliance are correct? Mark for Review
(1) Points
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: Configure ASR Service module and try again.
80. Which tasks are required after ASR Manager software is installed
on Management Nodes in Private Cloud Appliance? Mark for Review
(1) Points
Stop and disable ASR Manager service in both Management Nodes. (*)
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: Configure ASR Service module and try again.
81. Which folder in ASR Manager 5.x deployment should be moved to the
shared internal storage? Mark for Review
(1) Points
/var/log/asrmanager
/var/opt/asrmanager (*)
/opt/asrmanager
/usr/lib/asrmanager
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: Configure ASR Service module and try again.
ASR Assets
My Oracle Support
ASR Infrastructure
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: Configure ASR Service module and try again.
83. Identify correct pre-requisites that enable sending Service
Requests (SRs) from embedded ASR Manager in internal ZFS Storage Appliance to
service team at Oracle. Mark for Review
(1) Points
A valid System Support Contract and MOS Account for Private Cloud Appliance
(*)
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: Configure ASR Service module and try again.
84. Which statements about configuring ASR services for Private Cloud
Appliance are correct? Mark for Review
(1) Points
Configuring ASR services for Private Cloud Appliance includes two steps which
are deploying stand-alone ASR Manager in the Management Cluster and activating ASR
Assets in PCA. (*)
Correct Corect!
85. Which system component inside Private Cloud Appliance has an embedded ASR
Manager inside? Mark for Review
(1) Points
InfiniBand Switches
Server Nodes
Fabric Interconnect
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: Configure ASR Service module and try again.
192.168.4.4
192.168.4.3
192.168.4.216 (*)
Correct Corect!
ASR was initially created by Sun for Sun Hardware. It has been extended to
support Oracle Engineered System. (*)
All hardware components in Private Cloud Appliance can be monitored with ASR
solution.
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: Configure ASR Service module and try again.
[mgmt_init]
[...]
foundational_services: ovmm_mysql
ovmm
tinyproxy
xms
dhcpd
[...]
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: Configure ASR Service module and try again.
Both stand-alone diagnostic tool and Health Check function in PCA Admin CLI
will generate report as files that can be sent to Oracle Support Engineers for
troubleshooting.
System Diagnostics for Private Cloud Appliance are used for troubleshooting
and support purposes. (*)
Both stand-alone Appliance Diagnostic tool and Health Check function in PCA
Admin CLI can be leveraged. (*)
Health Check function in PCA Admin CLI will run test against various aspects
in Private Cloud Appliance. (*)
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: Management Tools module and try again.
90. When performing backup for Private Cloud Appliance, you can
leverage following CLIs:
which CLI sequences will possibly lead to a confirmed successful backup? Mark
for Review
(1) Points
6,1,6,2 (*)
6,2,3,5
6,1,3,4,5 (*)
6,2 (*)
6,2,3,4,1,5
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: Management Tools module and try again
91. Which CLI can be used if you want to see detail information of the Compute
Node (ovcacn30r1) in Private Cloud Appliance? Mark for Review
(1) Points
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: Management Tools module and try again.
https://10.11.2.116:7002/core/ovm/soap (*)
https://10.11.2.116:7002/dashboard
ssh://10.11.2.116
https://192.168.4.216:7002/ovm/console (*)
Correct Corect!
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: Management Tools module and try again.
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: Management Tools module and try again.
A job defines transaction boundary for all contained actions. The state of
job can indicate running or completion status of the job. (*)
Performance monitoring is only available for Oracle VM Server object. You can
define rules to determine health status for Oracle VM deployment.
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: Management Tools module and try again.
96. Which statements about PCA Management CLIs are correct? Mark
for Review
(1) Points
PCA Admin CLI provides more comprehensive management functions than those
available in Dashboard UI. (*)
PCA Admin CLI can run on both Management Nodes with identical functions.
PCA Management CLIs are firmware release dependent. Since firmware release
2.1.1, most previous single-function tools are consolidated into PCA Admin CLI
tool. (*)
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: Management Tools module and try again.
97. Which statements about OVM Manager CLI in Private Cloud Appliance are
correct? Mark for Review
(1) Points
OVM Manager CLI implements a customized interactive shell and need to install
a special client on administrators' workstation.
OVM Manager CLI service can be customized to enable password and key based
authentication. (*)
OVM Manager CLI can work seamlessly with OVM Manager UI because they both run
on same core services. (*)
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: Management Tools module and try again.
98. You are installing Private Cloud Appliance for one of your
customers. During installation a Compute Node (ovcacn08r1) shown in the Dashboard
UI has never been successfully discovered by the OVM Manager. Choose the CLIs to
find possible reasons and to fix the issue in case of whole server need to be
replaced.
1,2,4
2,3,4 (*)
2,3,5
1,2,3,4,5
Correct Corect!
Private Cloud Appliance Architecture
(Answer all questions in this section)
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
: Architecture module and try again
100. Which statements about data fabric in a PCA System are correct?
Mark for Review
(1) Points
Server and Storage nodes in each rack connect to InfiniBand Switches in same
rack. (*)
The fabric enables communications between Server and Storage nodes. (*)
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
: Architecture module and try again
PVI implementation does not use any existing network protocol like VxLAN so
that can simplify network planning. (*)
External switches in customers data center can help to route network traffic
across multiple PVIs.
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
: Architecture module and try again
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
: Architecture module and try again
103. Which statements about switch node deployment in a PCA System are correct?
Mark for Review
(1) Points
All Switch Nodes are installed at the top of each rack for optimized cabling
and easy maintenance.
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
: Architecture module and try again
IO Module (*)
Mid-plane (*)
105. Which statements about system racks in a PCA System are correct?
Mark for Review
(1) Points
All system components are installed at fixed position, and unpopulated RUs
are installed with filler-panels. (*)
Expansion Racks are optional to add more computing and storage capacity to an
existing PCA system.
Power cords and network cables are pre-loaded for those populated nodes only.
All racks in a PCA System use uniform Sun Rack II 1242 cabinet. However
customers can choose among different PDU options for their needs. (*)
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
: Architecture module and try again
Management tools are deployed in both Management Nodes, however can only be
executed from current active Management Node.
Management tools consume all management services on each system component via
the Ethernet-based internal management fabric.
Management tools are designed to manage Private Cloud Appliance as an
integrated platform. (*)
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
: Architecture module and try again
The storage inside Private Cloud Appliance is used as the "system" disk and
not recommended for storing guest VM's data. (*)
The storage inside Private Cloud Appliance can attach disk enclosures in
Expansion Racks to expand storage capacity.
The storage inside Private Cloud Appliance can provide data services via both
10G Ethernet and QDR InfiniBand interfaces.
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
: Architecture module and try again
108. Which statements about Oracle VM Server for x86 in a PCA System
are correct? Mark for Review
(1) Points
Dom0 in Oracle VM Server for x86 is a special domain installed and launched
with the hypervisor. (*)
Oracle VM Server for x86 is rooted from open-source Xen community. (*)
Oracle VM Server for x86 is deployed in all server nodes in a PCA System.
DomUs in Oracle VM Server for x86 are domains running real workload for
customers. (*)
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
: Architecture module and try again
109. Which statements about dom0 in Oracle VM Server for x86 are correct? Mark
for Review
(1) Points
Dom0 has privileges to control all physical resources from bare-metal server.
Dom0 implements management services that control virtual resources and life-
cycle of all guest domains (domUs). (*)
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
: Architecture module and try again
System Bootstrap Service will launch required system services at every power
on. (*)
System Bootstrap Service will setup Management Cluster with discovered system
resources at initial power on. (*)
System Bootstrap Service will start Management Nodes automatically.
Administrator has to power on Compute Nodes manually.
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
: Architecture module and try again
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
: Architecture module and try again
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
: Architecture module and try again
113. Which statements about server node deployment in a PCA System are
correct? Mark for Review
(1) Points
Management Nodes are pre-installed at factory, however all Compute Nodes can
be installed at customer's site.
Customers can expand memory capacity of a Compute Node with Memory Upgrade
Kits. (*)
All Compute Nodes inside same rack must be configured with identical model.
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
: Architecture module and try again
The fabric allows to manage and monitor all system components from bare-
metal. (*)
Dual Ethernet Switches in each rack are interconnected to build a single
fully-redundant switch.
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
: Architecture module and try again
115. Which statements about Virtualization Runtime in a PCA System are correct?
Mark for Review
(1) Points
Virtualization Runtime can be managed with PCA Admin CLI tool in firmware.
(*)
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
: Architecture module and try again
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
: Architecture module and try again
# cat /etc/redhat-release
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: Upgrade module and try again.
118. Which statements about upgrading a PCA System are correct? Mark
for Review
(1) Points
There will be little impact to the running guests during the upgrade process.
(*)
Built-in tool enables upgrading all software components together in a single
step.
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: Upgrade module and try again.
119. A Compute Node in an Expansion Rack can not boot properly after
upgrade. An OS reprovisioning has to be done to restore the server. Which tasks
must be performed to put the server back to work? Mark for Review
(1) Points
Execute the CLI: # pca-admin add server <node name> <tenant group name> (*)
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: Upgrade module and try again.
Execute the CLI: # pca-admin remove server <node name> <tenant group name>
from current master Management Node
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: Upgrade module and try again.
121. Which statements about upgrading firmware for a PCA System are correct?
Mark for Review
(1) Points
For the Management Cluster, current master node will be upgraded first then
current backup node.
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: Upgrade module and try again.
Backup configuration and running Guest VMs on a Compute Node before upgrade
Upgrade only a single Compute Node in a server pool at any time (*)
Only upgrade Compute Nodes in a PCA System when firmware upgrade is done (*)
123. You are delivering PCA firmware upgrade services, the CLI # pca-
admin update appliance get_image is successfully launched. Which CLI should be
executed next? Mark for Review
(1) Points
# pca-admin backup
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: Upgrade module and try again.
Execute the CLI: # pca-admin add server <node name> <tenant group name>
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: Upgrade module and try again.
The current backup Management Node has been updated successfully. (*)
The current master Management Node will boot from network device net0. (*)
The current master Management Node will retake the master role after the
upgrade completes successfully.
The current backup Management Node is now the new master Management Node. (*)
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: Upgrade module and try again.
Firmware patches must be uploaded into an external HTTP or FTP site that can
be accessed from Management Nodes directly.
Firmware patches will be released in a single ISO file. All new software
components for Private Cloud Appliance will be included.
Customers can download firmware patches from Oracle Support website after
signing the PCA System Support contract. (*)
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: Upgrade module and try again.
127. If you want to manage the Compute Node ovcacn28r1 in
a PCA System, which IP address can be used to access ILOM service of the Compute
Node? Mark for Review
(1) Points
192.168.4.28
192.168.40.28
192.168.4.128 (*)
192.168.140.28
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: System Configuration module and try again.
net1
NETMGMT
net0 (*)
net2
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: System Configuration module and try again.
/etc/pca.conf
/var/lib/pca/pca-system.conf
/var/lib/ovca/ovca-system.conf (*)
/etc/ovca.conf
Correct Correct!
PCA System enforces that all Compute Nodes in a server pool must be with same
model.
A server pool is uniquely mapped to a Tenant Group in the PCA System. (*)
Every Compute Node will be added into a server pool when discovered by Node
Automation Service.
Server pools and server membership of any server pool can only be managed
with PCA Admin CLI tool. (*)
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: System Configuration module and try again.
Two disk partitions are created on local hard drive. The smaller one is for
installing Oracle VM Server software, the larger one is for creating a local OVM
repository. (*)
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: System Configuration module and try again.
First Management Node will take over the master role when it rejoins the
cluster.
Only a single Management Node is active and run management services and
cluster virtual IPs. (*)
All shared files are stored in an OCFS2 file system which is mounted onto
both Management Nodes.
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: System Configuration module and try again.
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: System Configuration module and try again.
134. Which statements about IO Clouds and PVI Clouds in Private Cloud
Appliance are correct? Mark for Review
(1) Points
IO Clouds are created for defining virtual IO devices that can connect to
external fabrics. Uplinks from IO Modules must be selected in an IO Cloud
definition. (*)
PVI Clouds are created for defining virtual IO devices in a private fabric. A
PVI Cloud must be defined against an IB subnet in a SDN environment. (*)
Network Cloud and Storage Cloud are two supported IO Clouds which can be
differentiated by type of IO Modules in the definition. (*)
Both IO Clouds and PVI Clouds support vNIC and vHBA devices.
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: System Configuration module and try again.
Upper F1-15 (2*Quad 10G Ethernet Module, 2*Dual 8Gb FC Module), Lower F1-15
(2*Quad 10G Ethernet Module, 2*Dual 8Gb FC Module)
Upper F1-15 (2*Quad 10G Ethernet Module), Lower F1-15 (2*Quad 10G Ethernet
Module)
Upper F1-15 (4*Quad 10G Ethernet Module), Lower F1-15 (4*Quad 10G Ethernet
Module, 2*Dual 8Gb FC Module)
Upper F1-15 (4*Quad 10G Ethernet Module, 2*Dual 8Gb FC Module), Lower F1-15
(4*Quad 10G Ethernet Module, 2*Dual 8Gb FC Module) (*)
Upper F1-15 (4*Quad 10G Ethernet Module), Lower F1-15 (4*Quad 10G Ethernet
Module) (*)
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: System Configuration module and try again.
ib0, ib1
eth0
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: System Configuration module and try again.
137. Which bonding port in a Compute Node is NOT created over virtual
IO devices provisioned from Fabric Interconnect? Mark for Review
(1) Points
bond1 (*)
bond0
bond4
bond2
bond3
Correct Correct!
bond4 (*)
bond3
bond1
bond2
bond0
Correct Correct!
Correct Correct!
140. Which statements about stabilizing and grounding a PCA System are
correct? Mark for Review
(1) Points
(Choose all correct answers)
The PDUs in system racks can provide necessary grounding for the Private
Cloud Appliance through power cords. (*)
Stabilizing with Mounting Brackets can make system more stable but has more
restricted requirements to installation location. (*)
If customers want to move a PCA System to different locations, the PCA System
should be stabilized with Leveling Feet. (*)
For a fully loaded Private Cloud Appliance, only stabilizing with Mounting
Brackets is allowed.
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: System Installation module and try again.
2, 1, 4, 5, 3, 6
1, 2, 4, 5, 3, 6
1, 2, 4, 5, 6, 3 (*)
2, 1, 4, 5, 6, 3
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: System Installation module and try again.
142. Which statements about cabling a PCA System are correct? Mark
for Review
(1) Points
Both 10Gb and GbE switches can be supported for Ethernet Connections.
Before connecting network cables to the PCA System, the brackets at back of
both Fabric Interconnect must be removed first. (*)
Power cords from PDUs are pre-loaded in the PCA System, however matched
receptacles must be prepared by customer's data center. (*)
Power cords can be routed from top or bottom of each rack to work with
different data center environment. (*)
Network cables from the PCA System should connect to network switches in data
center. (*)
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: System Installation module and try again.
143. Which action are NOT correct when unpacking and moving a PCA
System to installation location? Mark for Review
(1) Points
Unpack racks at a location where is flat and can support total weight of the
package
Throw away mounting brackets of racks because they are useless after
installation (*)
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: System Installation module and try again.
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: System Installation module and try again.
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: System Installation module and try again.
146. Which docs & tools need to be prepared before installing a PCA
System? Mark for Review
(1) Points
Incorrect Sorry, that's not correct. Please review the Oracle Private Cloud
Appliance: System Installation module and try again.