Technical Manual SIMPLY HP - ING - Sez.5 - Appendix
Technical Manual SIMPLY HP - ING - Sez.5 - Appendix
Sect.5 - Page 1 OF 6
Doc.000540
SIMPLY HP
5. APPENDIX
5.1 SPARE PARTS
Should it be necessary to replace parts which may affect the safety of the machine in a negative way, only
use original spare parts.
ATTENTION!
When requesting Spare Parts, it is necessary to provide not only
! the code of the piece, but also the serial number of the unit .
Tables 5.1 and 5.2 indicate the electronic and mechanical components which can become faulty or
worn and which must therefore be replaced:
TABLE 5.1 – LIST OF SPARE PARTS
ATTENTION!
For the parts not indicated in tables 6.1 and 6.2
6.2, please contact the
technical assistance service.
Sect.5 - Page 2 OF 6
Doc.000540
SIMPLY HP
5.2 CONFIGURATION
The signals can be displayed in Italian, English, Turkish, German or Russian
on the Touch Screen of the UNIT console.
Selection of the language used is made when the system is turned on, in the way
shown below .
• Turn the UNIT on using the ON key and the decrease mAs key at the
same time.
mAs -
• The Set-up screen will appear. Press the “ Set-up” symbol.
• Now enter the “2442 ENTER” password on the alphanumerical
keyboard which will appear and you will enter the “System
Configuration” screen
• By pressing the language present in the “LANGUAGE” box by means
of the decrease mAs key, select the desired language.
• Finally, to confirm the selection, press Kv increase and the kV
decrease keys at the same time.
Following this, the initial Message will appear in the language selected. kV +
(E.g. READY - 40 kV/0.2mAs)
kV -
Sect.5 - Page 3 OF 6
Doc.000540
SIMPLY HP
Sect.5 - Page 4 OF 6
Doc.000540
SIMPLY HP
Sect.5 - Page 5 OF 6
Doc.000540
SIMPLY HP
Sect.5 - Page 6 OF 6
Doc.000540