Professional Documents
Culture Documents
Kaylee Analco - Calorimetry Gizmos
Kaylee Analco - Calorimetry Gizmos
Directions: Follow the instructions to go through the simulation. Respond to the questions and
prompts in the orange boxes.
1. The Latin word calor means “heat,” and meter c omes from the Greek word meaning “to measure.” What do
Measure of heat
2. Where have you heard the word calorie before? What do you think a calorie is?
Gizmo Warm-up
A calorimeter is an insulated container filled with a liquid, usually water. When
a hot object is placed in the calorimeter, heat energy is transferred from the
object to the water and the water heats up.
1. On the SIMULATION pane, select Copper. Use the slider to set its Mass to 200 g. Set the Water mass to
200 g. Check that the Water temp is set to 30.0 °C and the copper’s Temp is 90 °C. Select the GRAPH
tab, and click Play ( ).
A. What was the Final temperature of the copper and the water? 30.54
2. Specific heat capacity can be described as a substance’s resistance to temperature changes. Which
substance has a greater specific heat capacity, copper or water? Explain.
Copper is a better heat conductor then water because water takes a lot
more to heat
Reproduction for educational use only. Public sharing or posting prohibited. © 2020 ExploreLearning™ All rights reserved
Activity A: Get the Gizmo ready:
Heat transfer ● Click Reset ( ).
Question: What factors determine how heat energy transfers between objects?
1. Predict: In the Gizmo warm-up, you saw how 200 g of 90 °C copper transfers heat to 200 g of 30.0 °C
water.
A. How do you think increasing the water’s mass would affect the final temperature?
Increasing the water's mass would affect the final temperature by bringing it down.
B. How do you think decreasing the copper’s mass would affect the final temperature?
Decreasing the the copper's mass would affect the final temperature by bringing it down .
C. How do you think increasing or decreasing the copper’s initial temperature would affect the final
temperature?
2. Collect data: Use the Gizmo to determine the final temperature for each set-up listed below. Record your
results in the tables. In the first table, you experiment with changing the water’s mass. In the second table,
you change the copper’s mass. In the third table, you change the initial temperature of the copper. The first
row of each table has been completed for you.
Reproduction for educational use only. Public sharing or posting prohibited. © 2020 ExploreLearning™ All rights reserved
3. Analyze: For each factor listed in the chart below, explain how the final temperature was changed and why
you think that change occurred.
C. What was the effect of changing the initial temperature of the copper?
4. Draw conclusions: The amount that the water’s temperature increases depends on the mass of the water
and the amount of heat energy in the copper.
A. How does changing the initial mass of the copper affect how much heat energy it has?
B. How does changing the initial temperature of the copper affect how much heat energy it has?
5. Apply: Many gyms and health clubs have steam saunas, which are small steam-filled rooms. Traditionally,
steam saunas have a container of heated rocks. A small ladle of water is poured on the rocks in order to
make the steam.
A. Use what you have learned so far about heat transfer to explain how hot rocks can be used to make
steam?
B. Why do you think only a small ladle-full of water is poured on the rocks at one time?
Reproduction for educational use only. Public sharing or posting prohibited. © 2020 ExploreLearning™ All rights reserved
Get the Gizmo ready:
Activity B:
● Click Reset.
Specific heat
● Deselect Copper, and select Granite.
Question: How can you compare the specific heat capacities of various substances?
1. Explain: How do you think you can use the calorimeter to compare the specific heat capacities of the
2. Predict: Which substance do you think will have the highest specific heat capacity? Why?
3. Experiment: Use the Gizmo to determine the final temperature for each set-up listed below. Record your
results in the table. The first row has been completed for you.
4. Analyze: Of the three substances, which caused the largest temperature change in the water? What does
this indicate about its relative specific heat capacity?
5. Interpret: Remember that specific heat capacity is a measure of a substance’s resistance to temperature
change. The more resistant a substance is to temperature change, the higher is its specific heat capacity.
Rank the three substances in order of their specific heat capacities, from highest to lowest.
6. Predict: How do you think the specific heat capacity of ice will compare to that of copper, granite, and lead?
Reproduction for educational use only. Public sharing or posting prohibited. © 2020 ExploreLearning™ All rights reserved
7. Experiment: Deselect Lead, and select Ice. Use the default values for Temp (-30 °C) and Mass (50 g). Set
the Water temp to 60 °C and the Water mass to 200 g. Click Play.
B. What do you think is happening when the ice line on the graph is at 0 °C for a long period of time?
Why do you think the line disappears after that?
D. How does this change in the water’s temperature compare to the change caused by the other
substances you tested?
8. Extend your thinking: A lot of energy is needed to heat a substance with a high specific heat capacity.
However, even more energy is needed to cause a phase change (such as the melting of ice). Click Reset.
Set the ice’s Temp to -100 °C and its Mass to 50 g. Set the Water temp to 50 °C and Water mass to 200
g. Click Play.
C. Look at the GRAPH. The graph shows two separate stages: the heating of the ice and then the
melting of the ice. How much did the water’s temperature change while the ice was heating? How
much did it change while the ice was melting?
D. How did this experiment demonstrate ice’s high specific heat capacity?
Reproduction for educational use only. Public sharing or posting prohibited. © 2020 ExploreLearning™ All rights reserved
Activity C:
Get the Gizmo ready:
Calculating
● Click Reset.
specific heat
Introduction: The specific heat capacity of a substance is the amount of energy needed to change the
temperature of that substance by 1 °C. Specific heat capacity can be calculated using the following equation:
q= mc∆T
In the equation q represents the amount of heat energy gained or lost (in joules), m is the mass of the
substance (in grams), c is the specific heat capacity of the substance (in J/g °C), and ∆T i s the temperature
change of the substance (in °C).
Goal: Calculate the specific heat capacities of copper, granite, lead, and ice.
1. Solve: When you mix two substances, the heat gained by one substance is equal to the heat lost by the
other substance. Suppose you place 125 g of aluminum in a calorimeter with 1,000 g of water. The water
changes temperature by 2 °C and the aluminum changes temperature by –74.95 °C.
A. Water has a known specific heat capacity of 4.184 J/g °C. Use the specific heat equation to find out
how much heat energy the water gained (q) .
B. Assume that the heat energy gained by the water is equal to the heat energy lost by the aluminum.
Use the specific heat equation to solve for the specific heat of aluminum. (Hint: Because heat
energy is lost, the value of q is negative.)
Aluminum’s accepted specific heat value is 0.900 J/g °C. Use this value to check your work.
2. Calculate: Use the Gizmo to mix 200 g of copper at 100 °C with 1,000 g of water at 20 °C.
B. Calculate the temperature change of each substance by subtracting the initial temperature from
the final temperature.
:
∆Twater
∆Tcopper:
Reproduction for educational use only. Public sharing or posting prohibited. © 2020 ExploreLearning™ All rights reserved
3. Calculate: Use the Gizmo to mix 200 g of granite at 100 °C with 1,000 g of water at 20 °C.
B. Calculate the temperature change of each substance by subtracting the initial temperature from the
final temperature.
:
∆Twater ∆Tgranite:
4. Challenge: Use the specific heat capacity that you calculated for granite to determine how many grams of
granite at the initial temperature of 80 °C must mix with 3,000 g of water at the initial temperature of 20 °C
to result in a final system temperature of 20.45 °C. (Hint: Start by calculating how much heat energy is
needed to change the water’s temperature by 0.45 °C). Show your work. Use the Gizmo to check your
answer.
Mass of granite =
5. Extend your thinking: In addition to calculating specific heat capacities, some calorimeters can be used to
determine how much energy is in food. The energy in food is usually expressed in calories or kilocalories
(Calories). A calorie is the amount of energy needed to change the temperature of 1 g of water by 1 C.
There are 1,000 calories in a Calorie.
A. How many joules are in 1 calorie? (The specific heat of water is 4.184 J/g °C.)
B. Suppose a snack bar is burned in a calorimeter and heats 2,000 g water by 20 °C. How much heat
energy was released? (Hint: Use the specific heat equation.) Give your answer in both joules and
calories.
Reproduction for educational use only. Public sharing or posting prohibited. © 2020 ExploreLearning™ All rights reserved