Professional Documents
Culture Documents
Vehicle Identification: Notes Specified Value Measured Value
Vehicle Identification: Notes Specified Value Measured Value
Fax:
VAT Registration No.:
Autodata Note 40
Autodata Note 45
Tightening sequence
Dimensions
Notes Specified value Measured value
Wheelbase mm 2690\nLWB=3000
Track - front/rear mm 1638/1588
Tightening torques
Notes Specified value Measured value
Tightening torque - steel wheels 75-95 Nm\n6 Stud=170 Nm
Checking range - Front wheels
Notes Specified value Measured value
Load positioning Unladen
Fuel tank - percentage full % 100
Toe-in (N = negative, toe-out) mm 0 - 1,60
Toe-in deg 0° - 16'
Toe-in deg-1/100 0 - 0,27
Camber deg 0° - 1°
Camber deg-1/100 0 - 1
Castor deg 3°15' - 5°45'
Castor deg-1/100 3,25 - 5,75
Setting data - Four wheels
Notes Specified value Measured value
Load positioning Unladen
Fuel tank - percentage full % 100
Toe-in (N = negative, toe-out) mm 0,80±0,80
Toe-in deg 0°8'±8'
Toe-in deg-1/100 0,13±0,13
Camber deg 0°30'±30'
Camber deg-1/100 0,50±0,50
Camber adjustment Not adjustable
Castor deg 4°30'±1°15'
Castor deg-1/100 4,50±1,25
Castor adjustment Not adjustable
KPI (SAI) deg 5°±10'
KPI (SAI) deg-1/100 5±0,17
Included angle deg 5°30'
Included angle deg-1/100 5,50
Lock angles - max. inner deg 42°40'
Lock angles - max. inner deg-1/100 42,67
Lock angles - max. outer deg 33°
Lock angles - max. outer deg-1/100 33
Rear axle