Professional Documents
Culture Documents
Din en Iso 1302
Din en Iso 1302
European Standard EN ISO 1302 : 2002 has the status of a DIN Standard.
National foreword
This standard has been published in accordance with a decision taken by CEN/TC 290 to adopt, without
alteration, International Standard ISO 1302 as a European Standard.
The responsible German body involved in its preparation was the Normenausschuss Technische Grundlagen
(Fundamentals in Technology Standards Committee), Technical Committee Geometrische
Produktspezifikation und -prüfung.
The DIN Standards corresponding to the International Standards referred to in clause 2 and in the
bibliography of the EN are as follows:
ISO Standard(s) DIN Standard(s)
ISO 129 and ISO 129-1*) DIN 406-10 to DIN 406-12
ISO 1101 DIN ISO 1101
ISO 3098-2 DIN EN ISO 3098-2
ISO 3274 DIN EN ISO 3274
ISO 4287 DIN EN ISO 4287
ISO 4288 DIN EN ISO 4288
ISO 5436-1 DIN EN ISO 5436-1
ISO 5436-2 DIN EN ISO 5436-2
ISO 8785 DIN EN ISO 8785
ISO 10209-1 DIN 199-1
ISO 11562 DIN EN ISO 11562
ISO 12085 DIN EN ISO 12085
ISO 12179 DIN EN ISO 12179
ISO 13565-1 DIN EN ISO 13565-1
ISO 13565-2 DIN EN ISO 13565-2
ISO 13565-3 DIN EN ISO 13565-3
ISO 14253-1 DIN EN ISO 14253-1
ISO/TR 14638 DIN V 32950
ISO 14660-1 DIN EN ISO 14660-1
ISO 81714-1 DIN EN ISO 81714-1
© No part of this standard may be reproduced without the prior permission of Ref. No. DIN EN ISO 1302 : 2002-06
DIN Deutsches Institut für Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany, English price group 19 Sales No. 1119
has the exclusive right of sale for German Standards (DIN-Normen).
11.02
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 2
DIN EN ISO 1302 : 2002-06
Amendments
ISO 1302 having been adopted as a European Standard, the status of the corresponding DIN Standard
(DIN ISO 1302) has been changed accordingly.
Previous editions
DIN 140-1: 1921-02, 1931-10; DIN 140-2: 1922-12, 1931x-10; DIN 140-3: 1931-10; DIN 140-4: 1931x-10;
DIN 140-5. 1931-10; DIN 140-6: 1931-10; DIN 140-7: 1952-11, 1960-12, 1961-09, 1966-05;
DIN 200-1: 1924-03; DIN 200-2: 1924-04; DIN 3142: 1960-03; DIN ISO 1302: 1977-07, 1980-06, 1993-12.
National Annex NA
Standards referred to
(and not included in Normative references and Bibliography)
DIN 199-1 Terminology associated with drawings and item lists – Drawings
DIN 406-10 Engineering drawing practice – Dimensioning – Concepts and general principles
DIN 406-11 Engineering drawing practice – Dimensioning – Principles of application
DIN 406-12 Engineering drawing practice – Dimensioning – Tolerancing of linear and angular
dimensions (ISO 406 : 1987, modified)
DIN V 32950 Geometrical product specifications (GPS) – Masterplan (ISO/TR 14638 : 1995)
DIN EN ISO 3098-2 Technical product documentation – Lettering – Part 2: Latin alphabet, numerals and
marks (ISO 3098-2 : 2000)
DIN EN ISO 3274 GPS – Surface texture: Profile method – Nominal characteristics of contact (stylus)
instruments (ISO 3274 : 1996)
DIN EN ISO 4287 GPS – Surface texture: Profile method – Terms, definitions and surface texture
parameters (ISO 4287 : 1997)
DIN EN ISO 4288 GPS – Surface texture: Profile method – Rules and procedures for the assessment of
surface texture (ISO 4288 : 1996)
DIN EN ISO 5436-1 GPS – Surface texture: Profile method – Measurement standards – Part 1: Material
measures (ISO 5436-1 : 2000)
DIN EN ISO 5436-2 GPS – Surface texture: Profile method – Measurement standards – Part 2: Software
measurement standards (ISO 5436-2 : 2001)
DIN EN ISO 8785 Geometrical Product Specifications (GPS) – Surface imperfections – Terms, definitions
and parameters (ISO 8785 : 1998)
DIN EN ISO 11562 GPS – Surface texture: Profile method – Metrological characteristics of phase correct
filters (ISO 11562 : 1996)
DIN EN ISO 12085 GPS – Surface texture: Profile method – Motif parameters (ISO 12085 : 1996)
DIN EN ISO 12179 GPS – Surface texture: Profile method – Calibration of contact (stylus) instruments
(ISO 12179 : 2000)
DIN EN ISO 13565-1 GPS – Surface texture: Profile method – Surfaces having stratified functional
properties – Part 1: Filtering and general measurement conditions (ISO 13565-1 : 1996)
DIN EN ISO 13565-2 GPS – Surface texture: Profile method – Surfaces having stratified functional
properties – Part 2: Height characterization using the linear material ratio
(ISO 13565-2 : 1996)
DIN EN ISO 13565-3 GPS – Surface texture: Profile method – Surfaces having stratified functional
properties – Part 3: Height characterization using the material probability curve
(ISO 13565-3 : 1998)
DIN EN ISO 14253-1 Geometrical product specifications (GPS) – Inspection by measurement of workpieces
and measuring equipment – Part 1: Decision rules for proving conformance or non-
conformance with specifications (ISO 14253-1 : 1998)
DIN EN ISO 14660-1 Geometrical product specifications (GPS) – Geometrical features – Part 1: General terms
and definitions (ISO 14660-1 : 1999)
DIN EN ISO 81714-1 Design of graphical symbols for use in the technical documentation of products – Part 1:
Basic rules (ISO 81714-1 : 1999)
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
EN ISO 1302
February 2002
English version
|
ÈÉË
European Committee for Standardization
Comité Européen de Normalisation
Europäisches Komitee für Normung
© 2002. CEN – All rights of exploitation in any form and by any means Ref. No. EN ISO 1302 : 2002 E
reserved worldwide for CEN national members.
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 2
EN ISO 1302 : 2002
Foreword
International Standard
ISO 1302 : 2002 Geometrical Product Specifications (GPS) – Indication of surface texture in technical product
documentation,
which was prepared by ISO/TC 213 ‘Dimensional and geometrical product specifications and verification’ of the
International Organization for Standardization, has been adopted by Technical Committee CEN/TC 290
‘Dimensional and geometrical product specification and verification’, the Secretariat of which is held by AFNOR,
as a European Standard.
This European Standard shall be given the status of a national standard, either by publication of an identical text
or by endorsement, and conflicting national standards withdrawn, by August 2002 at the latest.
In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard:
Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,
Luxembourg, Malta, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom.
Endorsement notice
The text of the International Standard ISO 1302 : 2002 was approved by CEN as a European Standard without
any modification.
2
3
4
4
5
6
8
9
14
15
17
17
17
23
26
29
33
36
39
40
42
44
47
49
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 3
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 4
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 5
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 6
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 7
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 8
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 9
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 10
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 11
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 12
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 13
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 14
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 15
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 16
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 17
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 18
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 19
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 20
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 21
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 22
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 23
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 24
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 25
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 26
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 27
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 28
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 29
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 30
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 31
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 32
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 33
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 34
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 35
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 36
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 37
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 38
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 39
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 40
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 41
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 42
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 43
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 44
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 45
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 46
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 47
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 48
EN ISO 1302 : 2002
2020-03-16; Yamagar, Abhijit; SIEMENS, SI DS O OE MPL
Page 49
EN ISO 1302 : 2002