Professional Documents
Culture Documents
MSDS - Loctite Silver Grade Anti-Sieze
MSDS - Loctite Silver Grade Anti-Sieze
1LO21 Page 1 of 8
COMPANY DETAILS
Company Name
HENKEL AUSTRALIA PTY LTD (ABN 82 001 302 996)
Address
1 Clyde Street Silverwater
NSW 2229 Australia
Emergency Tel.
See CONTACT POINT
Tel/Fax
Tel: 1300 885 556 Fax: (02) 9525 5643
Other Information
IMPORTANT NOTICE: This Material Safety Data Sheet (MSDS) is issued by Henkel
Australia Pty Ltd in accordance with National Occupational Health and Safety
Commission (NOHSC) guidelines. The information contained herein must not be
altered, deleted or added to. Henkel Australia will issue new MSDSs when there
is a change in product specifications and/or NOHSC guidelines/regulations.
Henkel Australia has no objection to its MSDS being copied if:(a) the copy is
made for safety related purposes; and (b) no alterations or amendments are made
to the text or format of the MSDS. Henkel Australia does not guarantee the
accuracy of any MSDS for our products which: (a) is not prepared by Henkel
Australia; (b) is not authorised by Henkel Australia; (c) is not in the format
originally supplied by Henkel Australia; or (d) has otherwise been amended or
altered by a third party. Copyright [c] Henkel Australia Pty Ltd.
IDENTIFICATION
Product Code
76764
Product Name
SILVER GRADE ANTI-SEIZE LUBRICANT
Proper Shipping
Name
None Allocated
Other Names Name Mancode
Physical Data
Appearance
Silver paste with a petroleum odour.
Melting Point
Not available
Boiling Point
Not available
Vapour Pressure
Less than 5 mmHg @ 26.7C
Specific Gravity
1.25 (Water = 1)
Flash Point
93.3C (TCC)
Flamm. Limit LEL
Not available
Flamm. Limit UEL
Not available
Solubility in
Water
Insoluble
Other Properties
Evaporation Rate
Not available
Vapour Density
Not available
pH Value
Not applicable
Stability
Stable
Haz.
Polymerization
Will not occur
Materials to Avoid
Strong oxidizers
Other Information
Volatile Organic Compounds (US EPA Method 24): 12.96%; 162 g/mL.
Ingredients
Health Effects
Acute - Swallowed
Ingestion may cause stomach discomfort and vomiting. If vomiting occurs product
may be aspirated into the lungs leading to chemical pneumonitis.
Acute - Eye
Eye contact will cause moderate irritation.
Acute - Skin
Skin contact will cause moderate irritation.
Acute - Inhaled
Inhalation of vapours or mists generated at elevated temperatures will irritate
the respiratory system.
Hazards
Identification
Moderate skin, eye and respiratory irritant.
Prinicpal hazard of ingestion is aspiration into the lungs and subsequent
pneumonitis.
Chronic
May cause skin or eye irritation, dermatitis or oil acne upon prolonged or
repeated contact. Repeated and prolonged inhalation of graphite dusts may cause
pulmonary fibrosis, emphysema and pnuemoconiosis. The severity of these effects
is greatly influenced by the presence of other harmful mineral dusts, such as
crystalline silica.
Route(s) of Entry
Ingestion, inhalation.
Other Information
This product contains silicon dioxide (quartz). No exposure to free respirable
silica is anticipated during normal use of this product. It should be noted,
however, that free respirable silica has been classified by the IARC as Group 1
CARCINOGENIC TO HUMANS. Inhalation of free respirable silica may cause silicosis
or other serious delayed lung injury. Silica may be released by grinding or
machining of coated materials. Use approved dust respirator when grinding or
machining coating or coated items.
First Aid
Swallowed
Do NOT induce vomiting. Contact a Poisons Information Centre (Phone 131 126) or
a doctor at once.
Eye
If contact with the eye(s) occurs, wash with copious amounts of water for
approximately 15 minutes holding eyelid(s) open. Take care not to rinse
contaminated water into the non-affected eye. Seek medical attention.
Skin
Remove contaminated clothing and wash with soap and water. If symptoms develop
seek medical advice.
Inhaled
Remove victim to fresh air. If symptoms persist seek medical advice.
First Aid
Facilities
Eye wash and normal washroom facilities.
Advice to Doctor
Advice to Doctor
Treat symptomatically or consult a Poisons Information Centre (Phone 131 126).
Entry Route(s)
Ingestion, inhalation.
Medical
Conditions
Generally
Aggravated by
Exposure
Respiratory, skin and eye disorders. Inhalation of graphite powder may aggravate
emphysema and asthma.
Exposure Name mg/m3 (STEL) ppm (STEL) mg/m3 ppm TWA Footnote
Limits (TWA) (TWA)
Mineral oil 5
Graphite 3 Respirable
dust
Calcium 2
oxide
Aluminium 10 Metal dust
Silica, 0.2
quartz
Other Exposure
Info.
TWA - the Time-Weighted Average airborne concentration over an eight-hour
working day, for a five-day working week over an entire working life.
According to current knowledge these concentrations should neither impair the
health of, nor cause undue discomfort to, nearly all workers. These Exposure
Personal Protection
Respirator Type
(AS 1716)
If engineering controls are not effective in controlling airborne exposure then
respiratory protective equipment should be used suitable for protecting against
airborne contaminants. Final choice of appropriate breathing protection is
dependant upon actual airborne concentrations and the type of breathing
protection required will vary according to individual circumstances. Expert
advice may be required to make this decision. Reference should be made to
Australian/New Zealand Standards AS/NZS 1715, Selection, Use and maintenance of
Respiratory Protective Devices; and AS/NZS 1716, Respiratory Protective Devices.
Eye Protection
Safety glasses with side shields or goggles should be worn as described in
Australian Standard AS/NZS 1337 - Eye Protectors for Industrial Applications.
Glove Type
Neoprene, polyethylene or oil resistant plastic gloves should be worn.
Clothing
Suitable protective clothing should be worn e.g. cotton overalls buttoned at
neck and wrist.
Work/Hygienic
Practices
Ensure a high level of personal hygiene is maintained when using this product.
Always wash hands before eating, drinking, smoking or using the toilet.
Flammability
Fire Hazards
Combustible. This product will burn if exposed to fire.
Storage
Precautions
Store in a cool, dry, well ventilated area away from sources of ignition and hot
surfaces. This product should be stored away from foodstuffs and strong
oxidising agents.
Transport
Not classified as a Dangerous Good according to the Australian Code for the
Transport of Dangerous Goods by Road and Rail.
Handling
Keep away from eyes. Avoid prolonged skin contact. Avoid prolonged breathing of
vapours.
Proper Shipping
Name
None Allocated
Spills &Leaks
Remove all sources of ignition. Increase ventilation. Wear appropriate breathing
apparatus and full protective clothing to minimise skin and eye exposure. Place
inert, non-combustible absorbent such as vermiculite, sand or dirt onto
material. Collect the material and place into a suitable labelled container for
subsequent disposal. If large quantities of this material enter the waterways
contact the Environmental Protection Authority, or your local Waste Management
Authority.
Disposal
Dispose of according to relevant local, state and federal government
regulations.
Fire/Explosion Hazard
Fire/Explos.
Hazard
Combustible. This product will burn if exposed to fire.
Hazardous
Decomposition or
Byproducts
Hazardous products formed by fire or thermal decomposition: Oxides of carbon and
nitrogen.
Fire Fighting
Procedures
Fire-fighters should wear full protective clothing and self contained breathing
apparatus (SCBA) operated in positive pressure mode.
Extinguishing
Media
Carbon dioxide, foam, dry chemical. Do not use water.
Hazchem Code
None Allocated
OTHER INFORMATION
Toxicology
No toxicology data available for this product.
Environ.
Protection
Do not allow product to enter drains, waterways or sewers.
Risk Statement
R36/37/38 Irritating to eyes, respiratory system and skin.
Safety Statement
S23 Do not breathe gas/fumes/vapour/spray .
S24/25 Avoid contact with skin and eyes.
S26 In case of contact with eyes, rinse immediately with plenty of water and
seek medical advice.
S36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
Hazard Category
Irritant
CONTACT POINT
Contact
For emergency response: Gerard Buys - 0411 669 002
Technical Services Manager
...End Of MSDS...