MSDS - Bea
MSDS - Bea
MSDS - Bea
2. Hazards identification
Classification of the substance or mixture
Flammable Aerosol, Category 1
Labelling according to Regulation (EC) No 1272/2008
The substance is classified an labelled according to the CLP regulation.
Hazard pictograms GHS02, GHS07
Signal word Danger
Hazard statements
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
Precautionary statements
P210 Keep away from heat/sparks/open flames/hot surfaces. — No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Pressurized container: Do not pierce or burn, even after use.
P271 Use only outdoors or in a well-ventilated area.
P410 + P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122°F.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue rinsing.
Classification according to Directive 67/548/EEC or Directive 1999/45/EC
Labelling according to EEC-Regulation:
The product has been classified and labelled in accordance with EC Directives / Ordinance on Hazardous
Materials (GefStoffV).
Code letter and hazard designation for product:
Xi Irritant
F+ Extremely flammable
Risk phrases:
R36 Irritating to eyes
R12 Extremely flammable
R67 Vapours may cause drowsiness and dizziness.
Safety phrases:
16 Keep away from sources of ignition - No smoking.
23 Do not breathe vapour/spray.
25/24 Avoid contact with skin and eyes.
33 Take precautionary measures against static discharges.
Special labelling:
Container is under pressure. Protect from sun and temperatures above 50°C. Do not open with force or
incinerate even after use. Do not spray into flames or onto glowing objects.
Keep away from sources of ignition - No smoking. Keep out of reach of children.
Use only in well ventilated areas.
3. Composition/information on ingredients
Chemical characterization: Aerosol with mixture of substances listed below and non hazardous additions.
Components: Name of chemical weight %
CAS: 67-63-0 propan-2-ol
25-60
EINECS: 200-661-7 Xi R 36, R67; F R11
GHS02 Flam. Liq.2, H225; GHS07 Eye Irrit. 2, H319; STOT SE. 3, H336
CAS: 106-97-8 n-butane
10-30
EINECS: 203-448-7 F+ R12
GHS02 Flam. Gas 1, H220; GHS04
CAS: 74-98-6 propane
10-30
EINECS: 200-827-9 F+ R12
GHS02 Flam. Gas 1, H220; GHS04
4. First aid measures
Description of first aid measures
General information
Instantly remove any clothing soiled by the product.
If you feel uncomfortable consult a doctor and show the label if possible.
Personal protection for the First Aider.
After inhalation
Take affected persons into the open air and position comfortably
Remove the person from the danger zone under proper respiratory protection . If breathing is irregular or
stopped, give artificial respiration. Comfortable for the patients and provide medical help.
Seek medical treatment in case of complaints.
After skin contact
Wash contact areas with soap and water. Remove contaminated clothing. Launder contaminated clothing
before reuse.
After eye contact
Rinse opened eye for at least 15 minutes under running water. Get medical attention if irritation occurs.
After swallowing
In case of persistent symptoms consult doctor.
Do not induce vomiting - aspiration!
Do not vomit. Swallow activated carbon and sodium sulphate.
Information for doctor
Most important symptoms and effects, both acute and delayed
Headache, Dizziness, Sickness
Tiredness and other effects on the CNS.
Signs and symptoms of eye irritation may include:
Burning sensation, redness, swelling and / or blurred vision. Dry skin.
Indication of any immediate medical attention and special treatment needed
Causes depression of the central nervous system. Potential of a chemical pneumonia. Information from a
doctor or poison control center to obtain.
If ingested, material may be aspirated into the lungs and cause chemical pneumonia. Treat appropriately.