Technical Requirements For Chemical Goods Chem. No. (73)
Technical Requirements For Chemical Goods Chem. No. (73)
CHEM. NO. ( 73 )
1- Requirements
1.1 According to ISO 10454/1993 and ISO 4209/1/2001
2- Marking
2-1 At least one side wall shall be prominently marked within the tire rubber
with the markings stated in ISO 4209/1/2001. In addition it shall be marked with the
following:
- Trade mark
- Ply rating(PR)
- Actual number of plies and the material of each ply (nylon, rayon, polyester…etc)
- Maximum inflation pressure
- Country of manufacture
2-2 the following information shall be clearly on an adhesive label on the tread
and shall be made from a material that do not cause any deformation or damage
to the tread
- All marking in 2-1
- Tread type(if necessary)
- Month and year of production
- Validity (36 months from the date of production or expiry date in month and year
so that the difference from the date of production is not more than 36 months.