Professional Documents
Culture Documents
GRADE 9 & 10 DM - First Summative Test
GRADE 9 & 10 DM - First Summative Test
B. Identification.
Directions: Choose the letter of the word inside the box that best fits the description. Write your answer
before the number.
C. Directions: Based from the body measurement obtained in your IMC(individual measurement chart),
write the measurements needed, draft and label the following. Use separate sheet if necessary.
31.
32.
33.
34.
35
36.
37.
38.
39.
40.
41.
42.
43.
44.
45.
46.
47.
48.
Aleosan National High School
GRADE 9 TLE- DRESSMAKING/TAILORING
Second Summative Test
_______, 2020
17. 22.
18. 23.
19. 24.
C. Matching type
Direction: Match Column A with Column B. Choose the letter that best describes the statement. Write
the letters before the number.
Column A Column B
D. Essay
Directions: Answer the following questions briefly. 5pts. each.
B. Identification
Directions: Identify the word/s that best describe the following statements. Write your answer before the
number.
______________16. The kind of design that creates the center of interest.
______________17. The repetition of accent that creates an interesting design.
______________18. An element of design which easily attracts the attention of the client and becomes
the basis in choosing her apparel.
______________19. It refers to the lightness and darkness of a color.
______________20. It is the other name of color.
______________21. They are the basic colors.
______________22. The combination of primary and secondary colors.
_____________23. The color which suggests the strength and dignity and symbolizes mourning and
death.
_____________24. A warm color that suggests deliciousness and ripeness.
_____________25. A color which makes us feel bold and daring. It connotes passion and bravery.
D. Enumeration
Directions: Enumerate the following.
35.
37.
38.
C. Identification
Direction: Select and write the best answer of the statements from the words inside the box.
____________26. An instrument with multiple teeth on a wheel attached to a handle used for transferring
pattern marks.
____________27. One of the characteristics of disappearing marking pens used by dressmakers.
____________28. They are water soluble markers.
____________29. It provide shape to a garment, especially for a woman's bust.
____________30. This is used for transferring straight lines.
3. Among all the basic hand stitches, why do you think running stitches can be used to staystitch the curve
garment parts? 2pts.
Aleosan National High School
GRADE 10 TLE- DRESSMAKING/TAILORING
First Summative Test
_________________, 2020
_____20. If there is no available sewing machine what type of stitches you can use in sewing your
project.
a. Back stitch c. Chain stitch
b. Basting d. Over-casting
B. Matching Type
Directions: Match the components of a project plan in column A with their meaning in column B. Write
the letter of the correct answer before the number.
Column A Column B
___ 21. Date Finished A. Photographic representation of the project
___ 22. Date Started B. Itemized list of tools supplies needed to produce a project
___ 23. Design Specifications C. Reflects the number of projects
___ 24. Evaluation D. Specific description of the project
___ 25. Materials and Supplies Needed E. The process of assessing the finish projects
___ 26. Name of the Project F. The chronological steps Involved to accomplish the Project
___ 27. Objectives G. States the purpose why a project should be done
___ 28. Procedure H. Exact date when the project will be completed
___ 29. Project Plan no. I. List of tool and equipment and the accomplishment of the
___ 30. Tools and Equipment project
J. Date when the construction of the project will start.
____ 1. . It has a slight flare which makes this one look like a capital letter A.
A. A-Line C. Pleated
B. Gored D. Tulip
____ 2. Gives the impression of shorter and heavier.
A. Curve C. Horizontal
B. Diagonal D. Vertical
____3. Occupation undertaken for a significant period of a person’s life and with opportunities for
progress.
A. Career C. Carefree
B. Careerism D. Course
____ 4. It has a slight flare which makes this one look like a capital letter A. Someone who designs
clothing.
A. Fashionable C. Fashionmonger
B. Fashionista D. Fashion Designer
____5. The principle of design which connotes feeling of rest of equilibrium.
A. Balance C. Proportion
B. Emphasis D. Rhythm
____ 6. When do we prepare the project plan?
A. During the execution C. Before the execution
B. Towards the completion D. At the end of the execution
____7. Skirt looks like a skirt with wide flares, but it’s actually divided into two legs like pants.
A. Circle C. Gored
B. Divided D. Yoke
____8. A part of a project plan that depicts the chronological steps or how to accomplish the job.
A. Objectives C. Procedure
B. Bill of material D. Evaluation
___9. Refers to the shape of an object as determined by line.
A. Color C. Harmony
B. Form D. Rhythm
___10. These skirts have a puffy silhouette just above the hem with the hem gathered with an elastic
casing or a band.
A. Asymmetrical hem C. Pleated
B. Bubble D. Trumpet
___ 11. The feeling of oneness and unity.
A. Balance C. Line
B. Color D. Harmony
___ 12. If you want to determine and prepare the logistics needed to finance the project, which part of
the project plan will you check?
A. Bill of materials C. Tools and materials
B. Objectives D. Working drawing
____13. A type of skirt has pleats on a single pleat arranged around the waistband or a yoke.
A. A-Line C. Pleated
B. Draped D. Yoke
____14. The brightness or dullness of a color.
A. Color C. Intensity
B. Hue D. Value
____15. A short skirt with approximately 10 to 17 inches length.
A. Micro mini C. Maxi
B. Midi D. Mini
____16. The distance between the highest point of the bust
A. Bustline C. Bust Width
B. Bust Point Height D. Hipline
____17. Chart used as guide in taking body measurement
A. Accomplishment Chart C. Progress Chart
B. Measurement Chart D. Rubrics
____18. What measurement is needed in drafting 1 to 6 of Foundation Lines?
A. Back Figure C. Bust Width
B. Bust Height D. Front Figure
C. Identification
Direction: Identify the measurements needed in the illustration below.
Drafting sleeve basic pattern
33.
32.
31. 34.
35.
D. Directions: Based on the Individual measurement chart, write the measurement needed and the
computed measurement in drafting a front blouse sloper. You can compute manually or use a calculator to
get the needed measurement.
C. Correct or Incorrect
Direction: Tell whether the following steps are correct or incorrect. Write C for the correct step, and I for
the incorrect.
________ 26. Mark straight lines using a ruler.
________27. Transfer the marks on the right side of the cloth.
________28. Remove the pins after cutting the fabric.
________29. Walk around the table as you cut the fabric.
________ 30. Use short strokes in cutting the lines.
D. True or False
Direction: Write True if the statement is correct, and False if the statement is not true.
_______ 31. Slant the handle of the tracing wheel slightly inward toward the center of the curves to mark
easily.
_______ 32. Mark straight line using ruler.
_______ 33. Run the tracing wheel or tailor’ s chalk steadily and firmly along the edge of the ruler twice.
_______ 34. Transfer marks on the right side of the cloth.
_______ 35. In tracing wheel always used with dressmaker’s carbon paper
E. Essay
Direction: Answer the following questions briefly. 5pts each.
Column A Column B
_______16. Flat-fell seam a. Seam is often used for dresses, collars, linings, and fabrics that
do not ravel.
_______17. Running stitch b. This seam is within a seam.
_______18. Back stitch c. Used for easing and gathering sleeve.
_______19. Plain seam d. It has the appearance of machine stitch on the right side.
_______20. French seam e. This is a strong seam usually used on sturdy fabrics or
working clothes.
Direction: Match the column A to column B of the body measurement needed to be measured in ladies
skirt.
Column A Column B
21. Tool used for taking body measurements. A. Measurement Chart
22. Taken around the fullest part of the buttocks. B. Waistline
23. Used as a guide in taking body measurements C. Horizontal Measurement
and in drafting pattern. D. Vertical Measurement
24. Measurements taken around the smallest part E. Hipline
of the body. F. Circumferential measurement
25. Taken from the waistline down to the desired G. Skirt length
length of the skirt H. Tape measure
26. It is taken from the left to the right of your body. I. Torso
27. It is taken around the body. J. Point of Reference
28. It is taken from the top to the base of the body figure. K. Taking body measurement
29. It is the trunk of the body.
30. It is the point of beginning and end of given measurements
C. Direction: Give the steps in drafting the foundation line in making the basic skirt pattern.
31. 1- 2 =_____ 1
32. 1- 3 = _____ 2
33. 1 – 4 = _____ 3
3634. 2 – 5F = _____
35. 3 – 5B = _____ 4
5F
5B
____1. Which tool is used for holding, bending, and stretching the lead of electronics components or
connecting wire?
a. Anti-static mat c. Needle nose pliers
b. Hex driver d. Wire cutter
____2. What tool is composed of a heavy-duty metal base and a reinforced spring holder?
a. Soldering Iron c. Soldering Flux
b. Soldering Lead d. Soldering Stand
____3. Which tool is used to strip the electrical insulation from electric wires?
a. Wire stripper c. Wire Cutter
b. Soldering iron d. Flat head screwdriver
____4. Which tool is used to test network cable wiring?
a. Part Retriever c. Lan tester
b. Multi-tester d. Flat head screwdriver
____5. Which tool is used to join two or more metal conductors with the support of soldering lead melted
around it?
a. Soldering lead c. Philips head screwdriver
b. Wire Cutter d. Soldering Iron
____6. What tool is used to manipulate small parts?
a. Flat head screwdriver c. Tweezer
b. Philips head screwdriver d. Wire Stripper
____7. Which tool is used to cut wires?
a. Anti-static mat c. Philips head screwdriver
b. Hex driver d. Wire cutter
____8. What will happened to the screw if you over-tighten them with a screwdriver?
a. Not Tighten firmly c. stuck
b. Exposed d. all of the above
____9. Which of following statement shows a good practice of storing tools?
a. Parts should be correctly stored and labeled.
b. Use bins for storing small parts.
c. Putting the blame on the person (or individuals) in-charge for storing tools and parts.
d. Tools should be correctly placed anywhere on board and without labels.
____10. Which of the following statement is not the correct use of tools while working on a computer
equipment?
a. When working around electronic devices, make sure that the tools you’re using are not
magnetized.
b. Test your tool by touching it with a screw.
c. Use a screwdriver as a pry bar or crowbar.
d. Screws can become exposed if you over-tighten them with a screwdriver.
____11. Which of the following statements shows a successful maintenance program for tools and
equipment?
a. Well organized and scheduled.
b. Retaining records of maintenance/service conducted.
c. Ensuring that maintenance is performed as necessary.
d. Use bins for storing small parts
____12. The primary input device is __________.
a. mouse c. touchpad
b. keyboard d. microphone
____13. The primary storage device is _________.
a. CD c. hard disk
b. flash drive d. RAM
____14. What output device will you use if you want to see your output in a paper?
a. scanner c. printer
b. projector d. photocopier machine
____15. To select an item such as files, the most appropriate device to be used is __________.
a. pointer c. mouse
b. keyboard d. arrow keys
B. Identification
Manong Tony instructed Andrew to disassemble the system unit, he needs to learn the basics in
computer system servicing, such as knowing how to identify the different hand tools and its uses in
repairing equipment. Let’s help Andrew to answer and complete the paragraph below. Choose your
answer inside the box.
Tool Training Guidance Instruction Experience Properly Stored
C. TRUE OR FALSE: Write TRUE if the statement is correct and FALSE if the statement is wrong on
the space provided.
_______________26. All tools should be kept in good condition with regular maintenance.
_______________27. Use a flat head screwdriver with a crosshead screw.
_______________28. Preventive maintenance is the systematic care and protection of tools,
equipment, and machines to keep them in a safe, usable condition, limit
downtime, and extend productivity.
_______________29. Properly stored tools and equipment will be easy to find when needed and are
less likely to be lost.
_______________30. Use the tool for the purpose for which it was designed.
D. FILL IN THE BLANKS. Select from the word bank the missing word to complete the sentence.
31. The _____________________is a primary input device used with a computer and it is composed of
different buttons with a specific function, letters, numbers, and symbols.
32. It ____________________________ allows the creation and manipulation of graphics, images,
objects, and pictures
33. You can use _______________________ to optically scan images, printed text, handwriting, or an
object and converts it to a digital image.
35. When you enter data, _______________ temporarily hold it before and after processing.
36. In computer operations, ______________ performs the operation that converts the data into
information.
38. If you wish to store your information in hard disk or flash drive, you must invoke the _______
command.
39. Data can be letters, symbols, _____________, images.
B. TRUE OR FALSE: Write TRUE if the statement is correct and FALSE if the statement is incorrect on
the space provided.
____________21. Internet is a worldwide telecommunications system that connect millions of computers
and allow users to communicate with each other across distance through unique
identification numbers called web browser.
___________ 22. Anti-virus software is a way to access the information on the Internet.
___________ 23. Search Engine is a website that searches the World Wide Web for specific keywords,
which you enter into a search field.
____________24. The Navigation button will reload the current page if a website stops working.
____________25. There are three (3) basic parts of the URL. These are the Domain Name, Path, and the
Protocol.
____________26. A Web Browser is a software that allows you to view web pages and navigate the
Internet.
____________27. The World Wide Web are companies that connect you to the Internet like PLDT,
Globe and Smart Telecom.
____________28. Protocol is part of URL that has a unique reference that identifies a web site on the
internet.
____________29. The Links provides a group of words, phrase, or images on a website that's blue or
underlined in blue.
____________30. A Web Page is a single page of information on the World Wide Web.
C. Enumeration.
Enumerate the following.
1. What are the three (3) basic requirements to access the Internet?
2. List down five (5) common web browser used to access the Internet?
4. What are the three (3) basic parts of the URL?
____1. Mang Pedro wants to unsolder parts in the circuit so he can repair and replace broken
components. Which hand tool will help him complete the task?
A. Desoldering Tool C. Flat Screw Driver
B. Side Cutter Plier D. Soldering Pencil
____2. Sir John needs an electronic device that can supply direct current voltage to a circuit. What is the
best device for this?
A. Portable Electric Hand Drill C. Multi-tester
B. Side Cutter Plier D. Multi-Volts Power Supply
____3. Which electronic equipment is used to measure resistance, current and voltage?
A. Soldering Pencil C. Multi tester
B. Side Cutter Plier D. Desoldering Tool
____4. Mang Poldo wanted to make a hole on his computer metal chassis. What tool will he use?
A. Portable Handrill C. Multi-tester
B. Side Cutter Plier D. Desoldering Tool
____5. It is a connection of both physical and cable end that connects to a different cable, or to the
terminal of a component.
A. Soldering C. Electrical Cable Termination
B. Fixture Joint D. Rat Tail Joint
____6. It indicates both the starting point and the ending point of the process steps.
A. B. C. D.
____7. It represents an individual step or activity in the process.
A. B. C. D.
____8. It shows a decision point, such as yes/no or go/no-go. Each path emerging from the diamond must
be labeled with one of the possible answers.
A. B. C. D.
___9. It indicates that a particular step is connected to another page or part of the Flowchart. A letter
placed in the circle clarifies the continuation.
A. B. C. D.
____10. It shows where an in-process measurement occurs.
A. B. C. D.
____11. A tool used to hold, bend and stretch electronic component and wires.
A. Long Nose Plier C. Soldering Pencil
B. Side Cutter Pliers D. Desoldering Tool
____12. A tool used to cut or trim connected wires or terminal leads in the circuit board.
A. Multi-tester B. Soldering Pencil C. Side Cutter Plier D. Portable electric Handrill
____13. A tool used to fasten negative slotted screw.
A. Philips Screw Driver B. Multi-tester C. Flat Screw Driver D. Desoldering Tool
____14. A tool used to fasten or drive positive slotted screws.
A. Philips Screw Driver B. Multi-tester C. Portable electric Handrill D. Side Cutter Plier
____15. An electronic hand tool used to connect two or more metal conductors with melted of soldering
lead.
A. Philips Screw Driver C. Flat Screw Driver
B. Multi-Volts Power Supply D. Soldering Pencil
B. Identification
Directions: Identify the term as described on the following statements. Choose your answer inside the box
.
Flowchart Arrow Lines Connector Decision
C. Directions: Identify if the statement is TRUE or FALSE. Write check (/) if the statement is correct and
(x) if otherwise.
_________24. A flowchart is a diagram that uses graphic symbols to depict the nature and flow of the
steps in a process. Another name for this tool is "flow diagram."
_________25. A flowchart is commonly used by systems analysts to visualize the series of processes in a
business system.
_________26. A terminator is represented by a small rectangle with curved corners.
_________27. A process is represented by a rectangle. It must be described clearly and concisely.
_________28. A sub-process is represented by a rectangle with double lines on each side.
_________29. A decision is represented by a diamond. A process that can answer a decision of "yes" or
"no" requires a decision box.
_________30. A connector is represented by a big circle or a connector box and is labeled using letters.
_________31. Arrow lines drawn in one direction, preferably from top to bottom, keep a flowchart clear.
_________32. One of the Benefits of Using Flowcharts is to promote understanding of a process.
_________33. Box indicate both the starting point and the ending point of the process steps.
1. What are the common tools being used by a cellphone technician or electrician? 5pts.
2. Among the tools you have identified, why is there a need to use these tools in performing the task?2pts.
1.This is a troubleshooting step where a technician must collect as much information about the system,
the circuit, and the components used.
a. component testing c. diagnosing
b. repairing d. isolating defective component
2. In testing, to acquire an accurate result, the component tested must be
a. mounted on the circuit board c. taken out from the circuit board
b. mounted on the board and energized d. all of the above
3. Good troubleshooting is
a. a matter of luck c. begun by measuring all voltages
b. logical and orderly procedure d. always done with the power off
4. Which of the following component does not belong to the group?
a. Resistor c. Transistor
b. Capacitor d. inductor
5. Resistor : Ohms ; Capacitor : _________
a. watts c. volts
b. farad d. ampere
6. Resistance is measured in:
a. volts c. watts
b. Farad d. ohms
7. The unit of capacitance is expressed in:
a. ohms c. volts
b. Farad d. watts
8. When testing a capacitor, the ohmmeter shows no resistance or 0 ohms. The possible capacitor
defect is:
a. open c. leaky
b. shorted d. partially open
9. The possible defect of a resistor when ohmmeter shows very high or infinite resistance
a. partially open c. open
b. leaky d. shorted
10. It is an instrument with multiple functions. It can be an ohmmeter, voltmeter, or ammeter.
a. oscilloscope c. multi-tester
b. signal generator d. galvanometer
11. Sir Michael needs an electronic device that can supply direct current voltage to a circuit. What is the
best device for this?
a. Portable Electric Hand Drill c. Multi-tester
b. Side Cutter Plier d. Multi-Volts Power Supply
12. Which electronic equipment is used to measure resistance, current and voltage?
a. Soldering Pencil c. Multi tester
b. Side Cutter Plier C. Multi tester d. Desoldering Tool
13. Mang Poldo wanted to make a hole on his computer metal chassis. What tool will he use?
a. Portable Handrill c. Multi-tester
b. Side Cutter Plier d. Desoldering Tool
14. It is a connection of both physical and cable end that connects to a different cable, or to the terminal
of a component.
a. Soldering c. Electrical Cable Termination
b. Fixture Joint d. Rat Tail Joint
15. A tool used to fasten negative slotted screw.
a. Philips Screw Driver c. Flat Screw Driver
b. Multi-tester d. Desoldering Tool
1. Fixed Resistor
2. Electrolytic Capacitor
3. Rectifier Diode
4. Power Transformer
5. Transistor