Hose Clamps Tolerances
Hose Clamps Tolerances
HEAVY DUTY
NON PERFORATED ADJUSTMENT RANGE
BAND WIDTH Ø Min. (mm.) Ø Max. (mm.) Ø Min. (inches) Ø Max. (inches)
The Hallöf non-perforated clamps are designed for
medium to high load applications. Manufactured 16 27 5/8 1 1/16
according to DIN 3017, this clamp is designed to protect 20 32 13/16 1 1/4
soft material hoses from shearing. Material grade and 25 40 1 1 9/16
clamping range stamped on the band 30 45 1 3/16 1 3/4
35 50 1 3/8 2
ADJUSTMENT RANGE 40 60 1 9/16 2 3/4
50 70 2 2 3/4
BAND WIDTH Ø Min. (mm.) Ø Max. (mm.) Ø Min. (inches) Ø Max. (inches) 60 80 2 3/8 3 1/8
8 12 5/16 1/2 70 90 2 3/4 3 9/16
10 16 3/8 5/8 80 100 3 1/8 3 15/16
12 20 1/2 13/16 90 110 3 9/16 4 5/16
12 22 1/2 7/8 100 120 3 15/16 4 3/4
16 27 5/8 1 1/16 12 mm. 110 130 4 5/16 5 1/8
20 32 13/16 1 1/4
120 140 4 3/4 5 1/2
25 40 1 1 9/16
30 45 1 13/16 1 3/4 130 150 5 1/8 5 15/16
9 mm. 35 50 1 3/8 2 140 160 5 1/2 6 5/16
40 60 1 9/16 2 3/8 150 170 5 15/16 6 11/16
50 70 2 2 3/4 160 180 6 5/16 7 1/16
60 80 2 3/8 3 1/8
170 190 6 11/16 7 1/2
70 90 2 3/4 3 9/16
180 200 7 1/16 7 7/8
80 100 3 1/8 3 15/16
90 110 3 9/16 4 5/16 190 210 7 1/2 8 1/4
100 120 3 15/16 4 3/4 200 220 7 7/8 8 5/8
110 130 4 5/16 5 1/8 210 230 8 1/4 9 1/16
120 140 4 3/4 5 1/2 220 240 8 5/8 9 7/16
130 150 5 1/8 5 15/16 230 250 9 1/16 9 13/16
140 160 5 1/2 6 5/16
240 260 9 7/16 10 1/4
Material Band Housing Screw Suggested install torque Material Band Housing Screw Suggested install torque
W1 Zinc plated Zinc plated Zinc plated - Diameter Ø < 32 mm. = 3.0 Nm W1 Zinc plated Zinc plated Zinc plated - Diameter Ø < 32 mm. = 5.5 Nm
W2 AISI 430ss AISI 430ss Zinc plated - Diameter Ø > 32 mm. = 4.5 Nm W2 AISI 430ss AISI 430ss Zinc plated - Diameter Ø > 32 mm. = 7.0 Nm
W3 AISI 430ss AISI 430ss AISI 410ss W3 AISI 430ss AISI 430ss AISI 410ss
W4 AISI 304ss AISI 304ss AISI 304ss - Diameter Ø < 32 mm. = 3.0 Nm W4 AISI 304ss AISI 304ss AISI 304ss - Diameter Ø < 32 mm. = 6.0 Nm
W5 AISI 316ss AISI 316ss AISI 316ss - Diameter Ø > 32 mm. = 3.4 Nm W5 AISI 316ss AISI 316ss AISI 316ss - Diameter Ø > 32 mm. = 6.4 Nm
Note: Torque values are for reference only. It may vary depending on the type of hose. Note: Torque values are for reference only. It may vary depending on the type of hose.
HEAVY DUTY
Hallöf Heavy duty clamps are designed for high load applications.
They are ideal for applications where space constraints prevent
the use of a standard T-bolt clamp.