MSDS Jotun Pilot QD
MSDS Jotun Pilot QD
MSDS Jotun Pilot QD
Pilot QD Primer
Section 1. Identification
GHS product identifier : Pilot QD Primer
Product code : 1537
Product description : Paint.
Other means of : Not available.
identification
Product type : Liquid.
Approved
Specific hazards arising : Flammable liquid and vapor. In a fire or if heated, a pressure increase will occur and
from the chemical the container may burst, with the risk of a subsequent explosion. Runoff to sewer may
create fire or explosion hazard. This material is harmful to aquatic life with long lasting
effects. Fire water contaminated with this material must be contained and prevented
from being discharged to any waterway, sewer or drain.
Hazardous thermal : Decomposition products may include the following materials:
decomposition products carbon dioxide
carbon monoxide
phosphorus oxides
metal oxide/oxides
Environmental precautions : Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains
and sewers. Inform the relevant authorities if the product has caused environmental
pollution (sewers, waterways, soil or air). Water polluting material. May be harmful to
the environment if released in large quantities.
Appropriate engineering : Use only with adequate ventilation. Use process enclosures, local exhaust ventilation or
controls other engineering controls to keep worker exposure to airborne contaminants below any
recommended or statutory limits. The engineering controls also need to keep gas,
vapor or dust concentrations below any lower explosive limits. Use explosion-proof
ventilation equipment.
Environmental exposure : Emissions from ventilation or work process equipment should be checked to ensure
controls they comply with the requirements of environmental protection legislation. In some
cases, fume scrubbers, filters or engineering modifications to the process equipment
will be necessary to reduce emissions to acceptable levels.
Body protection : Personal protective equipment for the body should be selected based on the task being
performed and the risks involved and should be approved by a specialist before
handling this product. When there is a risk of ignition from static electricity, wear anti-
static protective clothing. For the greatest protection from static discharges, clothing
should include anti-static overalls, boots and gloves.
Other skin protection : Appropriate footwear and any additional skin protection measures should be selected
based on the task being performed and the risks involved and should be approved by a
specialist before handling this product.
Respiratory protection : Based on the hazard and potential for exposure, select a respirator that meets the
appropriate standard or certification. Respirators must be used according to a
respiratory protection program to ensure proper fitting, training, and other important
aspects of use.
Possibility of hazardous : Under normal conditions of storage and use, hazardous reactions will not occur.
reactions
Conditions to avoid : Avoid all possible sources of ignition (spark or flame). Do not pressurize, cut, weld,
braze, solder, drill, grind or expose containers to heat or sources of ignition.
Hazardous decomposition : Under normal conditions of storage and use, hazardous decomposition products should
products not be produced.
Delayed and immediate effects and also chronic effects from short and long term exposure
Short term exposure
Potential immediate : Not available.
effects
Potential delayed effects : Not available.
Long term exposure
Potential immediate : Not available.
effects
Potential delayed effects : Not available.
Bioaccumulative potential
Product/ingredient name LogPow BCF Potential
xylene 3.12 8.1 to 25.9 low
ethylbenzene 3.6 - low
trizinc bis(orthophosphate) - 60960 high
2-butanone oxime 0.63 2.5 to 5.8 low
Mobility in soil
Soil/water partition : Not available.
coefficient (KOC)
Additional information
DOT Classification : Reportable quantity
569.7 lbs / 258.64 kg [42.892 gal / 162.36 L]
Package sizes shipped in quantities less than the product reportable quantity are not
subject to the RQ (reportable quantity) transportation requirements.
TDG Classification : Product classified as per the following sections of the Transportation of Dangerous
Goods Regulations: 2.18-2.19 (Class 3).
Mexico Classification : -
ADR/RID : Tunnel restriction code: (D/E)
Hazard identification number: 30
IMDG : Emergency schedules (EmS): F-E, S-E
Marine pollutant: No.
IATA : -
Special precautions for user : Transport within user’s premises: always transport in closed containers that are
upright and secure. Ensure that persons transporting the product know what to do in the
event of an accident or spillage.
Users should always consult Jotun for specific guidance on the general suitability of this product for their needs
and specific application practices.
If there is any inconsistency between different language issues of this document, the English (United Kingdom)
version will prevail.