Indian Pricelist

THE WORLD LEADER
UNBRAKO ` PRICELIST - APRIL 2019
PRICE
LIST
DFL-12, w.e.f. April, 2019
Socket Screws 11
®
Durlok 31
Hex Bolt, Nut & Washer 36
Construction 51
Stainless Steel 59
Petrochemical 83
www.unbrako.com
THE WORLD LEADER
Largest
Industrial Fasteners
Manufacturer
in India
NOTE
Plating: All the products, unless otherwise ordered, are supplied in black thermal finish with a coat of rust preventive
oil. No guarantee can be give for Unbrako products which are plated by users or by outside plates, who may not have
considered hydrogen embrittlement problem.
Packing: All products are supplied in standard packing as described in respective price tables. For sizes M6 (1/4”) and
above - 3% extra packing charges will be applicable if the order quantity is less than one carton.
Pricing: The prices mentioned in this pricelist are in INR - Indian Rupee (`) The price, specification and other particulars
contained in this pricelist are subject to change with notice.
GST extra as applicable.
THE WORLD LEADER
Contents Thread Page

About Unbrako 4
Product, Thread & Mechanical Terminology 6
Quick Product Selection Guide 8
Thread Size Comparison 9
Limited Warranty and Exclusive Remedy 10
SOCKET Socket Head Cap Screws Metric 13

RANGE Socket Head Cap Screws Inch (BSW) 17
Countersunk Socket Cap Screws (CSK) Metric 20
Socket Low Head Cap Screws (LHCS) Metric 21
Socket Head Shoulder Screws Metric 22
Socket Set Screws (Knurled Cup Point) Metric / Inch 23
Button Head Socket Screws Metric 26
Flange Button Head Socket Screws Metric 27
Hexagon Wrench Sets Metric / Inch 28
Dowel Pins Metric 29
DURLOK® Durlok® Screws 34

Durlok® Nuts 35
Durlok® Washers 35
HEX 10.9 Hex Head Bolts/Screws Metric 38

FASTENERS Gr.8 Hex Head Bolts/Screws Inch (UNC) 43
Hex Nut - ISO 4032-Class 10 Metric / Inch 47
Hexagon Weld Nut Metric 48
Nylock Nut (Nylon Ring) DIN 985 - Grade 8 /10 Metric 49
Nylock Nut (Nylon Ring) ISO 7040 - Grade 8 /10 Metric 49
All Metal Prevailing Torque Nut DIN 980M & DIN 980V Metric 49
Square Section Spring Washer - DIN 7980 Metric 50
Flat Section Spring Washer - DIN 127 B Metric 50
Hardened Washer Metric 50
CONSTRUCTION IS 3757 Heavy Hex Structural Bolts Metric 53

FASTENERS IS 6623 Heavy Hex Nuts Metric 54
CE Approved IS 6649 Structural Washer Metric 54
High Tensile Track Shoe Bolts & Squre Nuts Metric / Inch 55
Drop In Anchors Metric 57
Drop In Anchors Setting Tools Metric 57
Direct Tension Indicator - BS EN 14399-9 Metric 58
STAINLESS Socket Head Cap Screws 304 Metric 61

STEEL Socket Head Cap Screws 316 Metric 64
Socket Head Countersunk Screws Metric 67
FASTENERS
Hexagon Head Screws 304 Metric 68
Hexagon Head Screws 316 Metric 74
Hexagon Head Screws 304 Inch (BSW) 78
Hexagon Head Screws 316 Inch (BSW) 79
Hex Nuts 304 / 316 BSW 79
Hex Nuts 304 / 316 Metric 80
Nylock Nut 982 / 985 Metric 80
Spring Washer 304 / 316 Metric 81
Plain Washer 304 / 316 Metric 82
Threaded Rod 304 / 316 Metric 82
PETROCHEMICAL Studbolt Metric 85

FASTENERS Studbolt Inch 88
Heavy Hex Nut Metric/Inch 91
Terms & Conditions 92

Comparison of Different Strength Grades 93
How to identify UNBRAKO products 94
Specialized Coatings 95
THE WORLD LEADER
About Unbrako
Founded in 1911, Unbrako is the world leader in
advancing the technology of bolted joints and meeting
the needs of industry for stronger and better performing
fasteners. Products such as the famous Unbrako® socket
head cap screw and Durlok® fasteners are the solutions
of choice for engineering applications across the world
& is used by industries such as the automotive, power
generation, petrochemical, heavy machinery,
construction and military sectors.
With an extensive international network in 35 countries,

Unbrako provides a complete range of industrial
fastening hardware including bolts, screws, SEM's, nuts,
West Coast Distribution Center studbolts, self-locking fasteners, thread forming
fasteners, among others.
Unbrako products are primarily used in performance

critical applications and incorporate unique design
and work-manship features that meet or exceed
recognized international standards, resulting in higher
tensile strength, improved fatigue resistance, ease of
installation, reduced total cost of maintenance and
extended life cycle. .
With advanced manufacturing, engineering and logistics

facilities, ISO/TS and CE certification, Unbrako is
equipped to provide technical support and full-service
package. Unbrako's focus is on building long - term
relationships with its customers. Full-service includes
engineering and design support, procurement and
purchasing services, localized warehousing and
transport, a variety of packaging options and choice
of delivery frequencies – to provide the right answer
to any customer need.
04 Toll Free : 1800.102.3911

THE WORLD LEADER
Certified Laboratory
Our Laboratory is NABL ISO/IEC 17025:2005 certified,
which facilitates in maintaining consistently high quality.
The fasteners go through strict quality checks at every
stage of the process. Our inspection facilities are
equipped with state-of-the-art equipment for testing of
both physical and metallurgical aspects of fasteners for
the most demanding applications:
• Tensile & Hardness testing
• Salt spray testing
• Digital profile analysis
• X-ray analysis of coating thickness
• Chemical composition analysis (Spectrometer)
• Impact Testing
• Dynamic fatigue testing
• Torque tension and friction testing
• Eddy current Testing
• Metallurgical Microscope with Image Analyzer
International Certifications
Our production facilities are ISO 9001, IATF 16949,
ISO 14001 and BS OHSAS 18001 Certified. Our
fasteners meet or exceed International Standards like
DIN, ISO, ASTM, IS, BS etc. We have expertise not only
ISO 9001:2015 NABL IATF 16949
ISO/IEC 17025:2005 in standard products, but also in made-to-order
customized products.
Specialized Coatings
We excel in a variety of coatings, which are done in-house.
These are designed to provide required protection in
different environments, e.g. Hot Dip Galvanizing,
Mechanical Galvanizing, Electroplating (Zinc & Copper
Cadmium), PTFE Coating, Zinc-Al Flake Coating
(Geomet, Delta Protekt) and Unbrako Wiscoat Coating.
Toll Free : 1800.102.3911 05

THE WORLD LEADER
Product Terminology TORQUING

It is the act of tightening a fastener by turning either the
bolt or nut.
TORQUING
Thread Terminology
BEARING Pitch
SHANK
LENGTH FILLET SURFACE
BODY Crest
Major
Angle Diameter
nk
Pitch
Fla
Diameter
OVERALL
LENGTH Minor
Diameter
Root
Pitch/2
CREST
NOMINAL
The outermost tip of a male thread as seen in a thread
SIZE
profile.
BODY FLANK
The unthreaded portion of the shank of a threaded The thread surface connecting the crest with the root.
fastener.
BEARING SURFACE
FILLET The supporting or locating surface of a fastener with
Concave junction between the head and shank. respect to the part it fastens or mates.
HEAD MAJOR DIAMETER

A headed fastener has one end enlarged into a The largest diameter of a thread.
preformed shape.
MINOR DIAMETER
OVERALL LENGTH The smallest diameter of a thread.
The Overall length of a headed fastener is the distance
from intersection between the bearing surface & the PITCH
ExtremeEnd point fastener, measured parallel to the axis The distance from a point on a screw thread to the
of the fastener. The length of a headless fastener is the corresponding point on the next screw thread.
distance from one extreme end to the other end, also
measured parallel to the fastener. PITCH DIAMETER
Is the diameter of a theoretical cylinder that passes
NOMINAL SIZE through the threads at a position that the width of
It is the basic major diameter of the thread. thread ridge and thread groove are equal.
SHANK ROOT
The Shank Length is minimum length of the unthreaded The Root of the thread is “WR”
Thread Form Maximum
UNR Radius
cylindrical portion of the shank. the bottom of the groove Minimum
UNR Radius
between two flank.
06 Toll Free : 1800.102.3911

THE WORLD LEADER
Thread Terminology PROOF LOAD

is a specified test load which a fastener must withstand
without any indication of failure.
THREAD LAPS
Are surface defects caused by the PROOF TEST
folding over of metal in the thread. is any specified test required for a fastener to indicate
that is suitable for the purpose intended.
THREAD RUNOUT
is the area between the thread and shank or head of ROCKWELL HARDNESS (Hrc)
the fasteners The Unbrako radiused root runout provides This is a specific method of measuring the hardness of
a smooth from that distributes stress and increases the a fastener. The “c” denotes a specific size indenter which
life of the fastener considerably. penetrates the surface of the prepared specimen.
THREAD STRESS AREA SHEAR JOINT

The area of a cylindrical bar of the same material and A joint in which the fastener has the load applied across
properties as the thread and capable of supporting the the axis and which tends to sever it.
same ultimate tensile load.
SHEAR STRENGTH
This is the maximum strength
of the fastener when it is subjected
to shear (transverse) loading.
Mechanical Terminology TENSILE STRENGTH
Is the force or stress required to break a
CREEP
fastener when the force or stress
Deformation that occurs over a period
is applied in straight tension.
of time when a fastener is subjected to
a constant stress at a constant high
TENSION JOINT
temperature.
A joint in which the fastener has the load applied to the
longitudinal direction and which tends to elongate it.
ELONGATION
is the increase in the thread
TORSION
length or a fastener that would
is the twisting force applied to a fastener during tightening.
occur during tightening or loading.
YIELD STRENGTH stic
ENDURANCE LIMIT Pla
This is the maximum force or stress

ge
Yield
an
The strength level below which a bolt or joint member

R
that can be applied to a fastener

nge
Ra
will have an essentially infinite life under cyclic loading.

without permanent (plastic)
stic
Ela
deformation occurring.
FATIGUE LIFE
is the number of cycles of
fluctuating stress and strain
of a specified nature that a fastener will sustain before
failure occurs.
IMPACT TEST
A test to determine the energy absorbed in fracturing a
test bar at high velocity.
Toll Free : 1800.102.3911 07

THE WORLD LEADER
Thread Size Comparison
Toll Free : 1800.102.3911 09

THE WORLD LEADER
Limited Warranty and Exclusive Remedy

Deepak Fasteners Ltd., through its Unbrako Division
and associated companies, warrants that these products
conform to industry standards specified herein and will
be free from defects in materials and workmanship.
This warranty is expressly given in lieu of any and all
other express or implied warranties, including any
implied warranty of merchantability or fitness for a
particular purpose, and in lieu of any other obligation
on the part of Deepak Fasteners.
Deepak Fasteners will at its option, repair or replace

free of charge (excluding all shipping and handling
costs) any products which have not been subject to
misuse, abuse, or modification and which in its sole
determination were not manufactured in compliance
with the warranty given above.
Deepak Fasteners makes no representations or

warranties, express or implied, that anything imported,
made, used, sold, or otherwise provided under any
sale agreement is or will be free from infringement of
patents / other proprietary rights of any third persons.
Nothing in this application, or any agreement, shall
be construed as giving rise to any obligation on
Deepak Fasteners part to indemnify or hold harmless
any Buyer from any liability relating to Buyer’s purchase,
use, or re-sale of Deepak Fasteners product, or the
incorporation of Deepak Fasteners product into another
manufactured product.
The remedy provided herein shall be the exclusive

remedy for any breach of warranty or any claim arising
in any way out of the manufacture, sale or use of
these products. In no event shall Deepak Fasteners be
liable for consequential, incidental or any other damages
of any nature whatsoever except those specifically
provided herein for any breach of warranty or any claim
arising in any way of the manufacture, sale or use of
these products. No other person is authorized by
Deepak Fasteners to give any other warranty, written
or oral, pertaining to the products.
10
Socket Screws
Page Contents
13 Socket Head Cap Screws
17 Socket Head Cap Screws
20 Countersunk Socket Head Cap Screws (CSK)
21 Socket Low Head Cap Screws (LHCS)
22 Socket Head Shoulder Screws
23 Socket Set Screws (Knurled Cup Point)
26 Button Head Socket Screws
27 Flange Button Head Socket Screws
28 Hexagon Wrench Sets
29 Dowel Pins
THE WORLD LEADER
Unbrako Socket Range
Unbrako is the world’s leading socket Unbrako socket screws meet/exceed Superior performance ultimately
screw brand with more than 100 years industry standards. Unbrako is top- translates into cost savings: reduced
experience of supplying to high-end grade solution for those industrial number of parts, reduced weight and
industries, such as the automotive, end-users who demand maximum size of equipment, less equipment
aerospace, petrochemical, heavy precision, product lifespan, reliability failureand downtime, longer product
machinery and military sectors. and premium technical services. life and lower total cost.
Advantages
Compound Fillet Radius
By blending 2 different radii
doubles fatigue life at critical
head-shank juncture
TM
Better installation ability Patented E-Code
Deep, accurate socket for "Lot Code" Markings
perfect fit and high-torque The ultimate in fastener
wrenching traceability
Higher Min ULT Tensile Wide Radius Threads

Unbrako Socket Screws 3R Radiused Root Runout Thread Fully formed radiused thread
are 10,000 PSI stronger Increases fatigue life up to 300% increases fatigue life 100%
than industry standard over flat root thread forms.
Contour flow & root radius Controlled runout root radius Forged heads Accurate socket depth
SHANK
ROOT
BODY
Contour-following flow lines provide Unbrako's controlled runout root radius Controlled head forging, uniform Accurate socket depth allows more
extra shear strength in threads, resist provides a smooth form that distributes grain flow and unbroken flow lines, wrench engagement than other screw,
stripping and provide high fatigue stress and increases fatigue life of thread make heads stronger, minimizes permitting tightening without cracking
resistance. runout up to 300% for certain sizes. failure in vital fillet area, and improves or reaming the socket while providing
fatigue strength. ample metal in the crucial fillet area
Extra large root radius doubles fatigue The sharp angle at the root of con- for maximum head strength.
life compared to flat root thread forms. ventional threads results in high stress
concentration and crack initiation points.
THE WORLD LEADER
Socket Head Cap Screw Metric

M2 M2.5 M3
Diameter Wrench Key Size 1.5mm Wrench Key Size 2mm Wrench Key Size 2.5mm
Length ` Price/ Box Qty ` Price/ Box Qty ` Price/ Box Qty
Part No. Part No. Part No.
100 Pcs 100 Pcs 100 Pcs
3 104151 1,406 500
4 104152 630 500
5 104154 641 500 104161 608 500 106218 991 500
6 104155 653 500 104162 630 500 103002 854 500
8 104157 664 500 104163 647 500 122097 624 500
10 104159 675 500 104164 664 500 113583 522 500
12 106216 697 500 104166 731 500 120870 522 500
16 103003 520 500
20 113623 520 500
25 103010 571 500
30 103013 668 500
35 106219 835 500
40 406027 956 500
45 700034 1,057 500
M4 M5 M6
Diameter
Wrench Key Size 3mm Wrench Key Size 4mm Wrench Key Size 5mm
100 Pcs 100 Pcs 100 Pcs
6 106223 806 500 106224 691 500
8 113810 570 500 122122 589 500 103042 799 200
10 113839 454 500 122243 326 500 122111 529 200
12 121077 408 500 121094 326 500 120872 502 200
16 103014 426 500 103024 356 500 103044 477 200
20 125753 457 500 113970 382 200 119790 529 200
25 125381 501 500 121096 408 200 119937 594 200
30 103018 594 500 103029 497 200 122121 671 200
35 103019 651 200 115292 544 200 121090 735 200
40 103021 719 200 103030 594 200 121075 799 200
45 103022 821 200 103031 645 200 122087 865 200
50 103023 942 200 103035 651 200 112624 943 200
55 400835 1,513 200 103038 1,114 200 113128 1,027 200
60 180011 1,931 200 103040 1,428 200 122088 1,898 200
65 551167 2,500 200 106225 1,548 200 103047 1,969 200
70 106228 1,666 200 103048 2,054 200
75 700072 2,029 200 103049 2,246 200
80 404774 2,143 200 103051 2,434 200
90 181525 2,366 200 103052 2,615 200
100 551170 3,189 200 103053 2,951 200
110 103054 3,984 100
120 103055 4,358 100
130 183896 4,701 100
140 700097 5,045 100
150 551172 5,366 100
Grey highlighted items are full threaded
April 2019 Toll Free : 1800.102.3911 13

THE WORLD LEADER

M8 M10 M12 M14
Diameter Wrench Key Size 6mm Wrench Key Size 8mm Wrench Key Size 10mm Wrench Key Size 12mm
` Price/ ` Price/ ` Price/ ` Price/
Length Part No. Box Qty Part No. Box Qty Part No. Box Qty Part No. Box Qty
100 Pcs 100 Pcs 100 Pcs 100 Pcs
10 103056 1,028 200
12 114972 775 200 106237 1,208 200
16 103058 645 200 103080 1,124 200 106247 3,442 100
20 122086 693 200 113163 1,171 200 112607 2,907 100
25 119351 711 200 115060 1,118 100 122250 2,547 100 400528 6,804 50
30 119383 852 200 122114 1,199 100 122251 2,419 100 400529 6,618 50
35 122113 853 200 113257 1,295 100 125530 2,462 100 400530 5,564 50
40 113143 975 200 100845 1,545 100 114996 2,485 100 400531 5,695 50
45 121076 1,139 200 121088 1,708 100 115075 2,722 50 400532 5,799 50
50 121068 1,199 200 125660 1,869 100 112360 2,585 50 120863 5,929 50
55 103063 1,324 100 103087 2,018 100 122255 3,099 50 400533 6,003 50
60 121070 1,425 100 122217 2,183 100 122260 3,191 50 112000 6,360 50
65 103064 1,550 100 103088 2,358 100 122261 3,350 50 400534 6,456 50
70 103066 1,702 100 125786 2,542 50 103098 3,527 50 400535 6,962 50
75 103069 1,757 100 103090 2,708 50 103099 3,792 50 400536 7,371 50
80 103070 2,535 100 103091 3,745 50 103100 4,427 50 400537 7,716 20
90 103073 2,941 100 103094 4,282 50 103103 5,005 50 400538 7,892 20
100 103075 3,489 100 103095 4,879 50 122142 5,530 50 400539 9,795 25
110 103076 4,361 100 103096 5,779 50 125791 6,810 25 400540 10,941 25
120 103077 5,093 50 103097 5,845 50 103104 7,830 25 400508 11,501 25
130 106230 6,179 50 106240 7,958 50 103107 9,264 25 180223 12,994 25
140 106231 6,637 50 106241 8,880 50 103108 10,331 25 180103 14,260 25
150 106232 7,168 50 106242 9,876 50 103110 11,420 25 180225 15,240 25
160 106233 7,859 100 106243 12,963 50 107456 18,829 25 180226 15,812 10
170 700125 8,485 100 210001 14,293 50 181063 21,278 20 210002 17,269 10
180 106234 8,944 100 106244 14,582 25 107458 20,701 20 180227 18,286 10
200 106235 9,884 100 106245 15,587 25 107459 22,410 20 551663 20,639 10
220 400517 20,025 25 400570 24,796 20 791320 22,703 10
230 183555 31,054 20 791321 23,620 10
240 400571 37,226 20 791322 24,652 10
260 400572 42,540 20 791323 26,486 10
280 400573 44,568 20 791324 28,551 10
1. Specifications : Generally conforming to IS 2269, DIN 912, ISO 4762.
2. Threads : ISO Metric (Coarse Series) 4g6g as per IS 4218, ISO 261, ISO 965.
3. Material : Unbrako high grade alloy steel.
4. Mechanical Properties : Property Class 12.9 as per IS 1367, ISO 898 Part I.
5. Note : Upto 80mm Diameter can be manufactured against request.
6. For sizes beyond those listed, prices available on request.
7. Plating : No guarantee can given for Unbrako products which are plated by users or by outside plates,
who may not have considered hydrogen embrittlement problem.
8. Products can be supplied with Hot Dip Galvanized and Electro Galvanized Plating. Prices available on request.
14 Toll Free : 1800.102.3911 April 2019

THE WORLD LEADER

M16 M18 M20 M22
DIA
Wrench Key Size 14mm Wrench Key Size 14mm Wrench Key Size 17mm Wrench Key Size 17mm
Length ` Price/ Box Qty ` Price/ Box Qty ` Price/ Box Qty ` Price/ Box Qty
Part No. Part No. Part No. Part No.
100 Pcs 100 Pcs 100 Pcs 100 Pcs
20 210003 6,511 50
25 106248 6,335 50 210006 15,500 25
30 103112 6,335 50 183894 17,777 20 107465 15,079 10
35 103113 5,199 50 400541 17,999 20 107466 15,278 10
40 125751 5,181 50 400542 15,762 20 103130 13,375 10 180408 20,227 10
45 103115 5,552 50 400606 15,876 25 103131 13,844 10 180409 21,401 10
50 112474 5,535 25 100844 16,000 10 103132 12,896 10 180181 19,111 10
55 103117 5,892 25 400543 16,099 10 103136 13,661 10 180182 20,915 10
60 112594 5,784 25 400544 16,228 10 103137 13,071 10 180183 22,098 10
65 103118 6,477 20 400545 16,360 25 103138 13,888 10 180184 23,943 10
70 103119 6,990 20 400546 17,471 10 103141 14,832 10 180185 25,070 10
75 103120 7,598 20 400547 18,612 10 103142 15,799 10 210007 26,576 10
80 125658 7,737 20 400549 18,975 10 103143 15,301 10 180186 27,932 10
90 103122 8,624 10 400550 19,359 10 103144 16,427 10 180187 28,508 10
100 103123 9,826 10 400551 20,308 10 103145 17,706 10 180188 30,896 10
110 103124 10,968 20 400548 22,471 25 103146 19,599 10 180189 32,695 10
120 103126 11,538 20 400552 24,611 15 103148 21,491 10 180190 35,334 5
130 103127 13,151 20 180311 27,404 10 103150 23,358 10 180191 47,767 5
140 103128 14,086 20 180229 30,424 10 103151 25,235 10 180192 54,292 5
150 103129 15,010 20 180407 31,797 10 103152 27,634 10 180193 72,384 5
160 103364 29,887 10 180230 33,918 10 107462 35,418 10 180194 85,316 5
170 180418 33,286 10 210005 40,167 10 180495 40,448 10 791330 88,576 5
180 107460 34,215 10 100231 47,712 10 107463 40,448 10 180196 93,840 5
200 107448 36,782 10 551668 50,795 10 107464 42,190 10 180198 100,438 5
220 400574 42,456 10 791325 55,610 10 400553 43,946 10 210008 107,358 5
230 182815 48,134 10 791326 58,477 10 181001 56,410 5 791331 111,981 5
240 400575 49,882 10 791327 60,770 10 400554 68,874 5 210009 119,121 5
260 400576 62,975 10 791328 65,356 10 400555 84,487 5 210010 127,881 5
280 400577 76,059 10 551667 69,943 10 400556 100,087 5 210011 132,927 5
300 400578 81,492 10 791329 74,529 10 400557 107,235 5 210012 142,423 5
1. Specifications : Generally conforming to IS 2269, DIN 912, ISO 4762.
2. Threads : ISO Metric (coarse series) 4g6g as per IS 4218, ISO 261, ISO 965.
4. Mechanical Properties : Property Class 12.9 as per IS 1367, ISO 898 Part l.
5. Note : Upto 80mm diameter can be manufactured against request.
6. For sizes beyond those listed, prices on application.
April 2019 Toll Free : 1800.102.3911 15

THE WORLD LEADER

M24 M27 M30
Diameter Wrench Key Size 19mm Wrench Key Size 19mm Wrench Key Size 22mm
100 Pcs 100 Pcs 100 Pcs
45 103153 17,813 10
50 103155 17,064 10 551648 38,735 5
55 103157 19,203 10
60 103158 19,739 10 180233 35,086 5 180207 34,937 5
65 103159 20,986 10 581201 37,265 5 210014 34,696 5
70 103160 22,389 10 180326 38,057 5 116464 38,407 5
75 103161 23,722 10 210013 39,990 5 182283 40,037 5
80 103162 24,950 10 406161 42,666 5 140610 41,547 5
90 103163 26,172 10 406162 45,671 5 140611 43,646 5
100 103165 27,601 10 406163 48,716 5 140612 48,771 5
110 103166 29,191 10 406164 51,764 5 140613 51,815 5
120 103167 32,441 10 400607 54,807 5 140614 54,861 5
130 103168 33,922 5 406165 58,611 5 140615 58,670 5
140 103170 36,275 5 406166 60,896 5 140616 62,661 5
150 103171 38,646 5 400608 64,707 5 140617 64,778 5
160 104143 64,307 5 400609 102,004 5 140618 97,479 4
180 104146 67,132 5 406168 112,665 5 140620 107,657 4
200 104147 71,863 5 400579 122,567 5 140621 117,113 5
220 400560 76,910 5 180003 152,784 4 400622 145,429 3
240 400561 81,963 5 406171 169,297 4 400623 159,375 3
260 400562 84,526 5 406172 184,405 3 140624 167,311 2
280 400563 88,804 5 406173 196,815 3 140625 178,276 2
300 400564 95,149 5 406174 207,644 3 400626 189,245 2
M33 M36 M42

Diameter Wrench Key Size 24mm Wrench Key Size 27mm Wrench Key Size 32mm
100 Pcs 100 Pcs 100 Pcs
75 210015 61,815 5
80 180254 62,423 5 140629 74,982 5
90 400649 69,643 5 140630 81,864 5 182336 115,648 5
100 400628 72,773 5 140631 81,887 5 400645 126,692 12
110 180255 74,610 5 400632 86,334 4 700380 130,135 12
120 180256 81,443 5 140633 90,064 4 183113 141,519 10
130 405492 87,642 5 400634 93,047 4 182331 144,562 10
140 180257 90,594 4 140635 102,727 3 700383 156,420 9
150 180258 95,164 4 140636 106,430 3 180960 159,702 9
160 180259 125,994 4 140637 143,227 3 181289 223,352 9
180 180261 140,068 3 140639 160,032 3 182059 237,049 8
200 180263 152,248 3 140640 173,431 2 181290 256,813 7
220 210016 188,678 3 180294 214,432 2 400647 322,181 7
240 210017 203,257 3 140641 220,330 2 182510 335,831 6
260 210018 212,629 2 140642 235,967 9 700390 358,204 6
280 210019 224,334 2 180411 251,652 8 181291 380,599 6
300 210020 241,851 2 140643 274,808 8 180863 402,987 6
16 Toll Free : 1800.102.3911 April 2019

THE WORLD LEADER
Socket Head Cap Screw Inch (BSW)

3/16 1/4 5/16 3/8
Diameter Wrench Key Size 5/32” Wrench Key Size 3/16” Wrench Key Size 7/32” Wrench Key Size 5/16”
Length Part No. ` Price/ Box Qty ` Price/ Box Qty ` Price/ Box Qty ` Price/ Box Qty
100 Pcs 100 Pcs 100 Pcs 100 Pcs
3/8 400056 456 200 400068 545 200
1/2 400057 456 200 400069 529 200 400085 752 200 400101 1,139 200
5/8 400058 402 200 400070 519 200 400086 641 200 400102 1,107 200
3/4 400059 456 200 400071 545 200 400087 688 200 400103 949 200
7/8 551219 484 200 400072 563 200 400088 698 200 400104 1,083 200
1 400061 510 200 400073 610 200 400089 747 200 400105 1,053 200
1 1/4 400062 564 200 400074 671 200 400090 856 200 400106 1,154 100
1 1/2 400063 644 200 400075 770 200 400091 957 200 400107 1,285 100
1 3/4 400064 733 200 400076 943 200 400092 1,131 200 400108 1,535 50
2 400065 733 200 400077 918 200 400093 1,131 200 400109 1,595 100
2 1/4 210021 867 200 400078 1,859 200 400094 1,359 200 400110 1,842 100
2 1/2 400066 965 200 400079 1,912 200 400095 1,359 100 400111 1,978 100
2 3/4 400080 2,237 200 404433 1,658 100 400112 2,213 100
3 400081 2,237 200 400096 1,658 100 400113 2,213 100
3 1/4 400082 2,682 200 701026 2,768 100 400114 3,241 50
3 1/2 400083 2,607 200 400098 2,768 100 400115 3,320 50
4 400084 2,954 100 400099 3,284 100 400116 3,897 50
4 1/2 400100 5,296 100 400117 5,905 50
5 701030 5,968 100 400118 7,008 50
5 1/2 400181 8,422 50
6 400119 8,916 50
1. Specifications : Generally conforming to BS 2470.
2. Threads : BS Whitworth Fine, Medium as per BS 84.
4. Mechanical Properties : As per BS 2470
5. Note : Upto 4 Inch Dia can be manufactured against request.
6. Plating : No guarantee can given for unbrako products which are plated by users or by outside plates,
7. For Socket head cap screw UNC, above prices will apply.
April 2019 Toll Free : 1800.102.3911 17

THE WORLD LEADER

7/16” 1/2” 5/8”
Diameter
Wrench Key Size 5/16” Wrench Key Size 3/8” Wrench Key Size 1/2”
100 Pcs 100 Pcs 100 Pcs
3/4 551220 2,638 100 400130 2,988 100
7/8 791967 2,638 100 402942 2,988 100 210033 5,641 50
1 400121 2,552 100 400131 2,539 100 400150 5,487 50
1 1/4 400122 2,552 100 400132 2,661 100 400151 4,769 50
1 1/2 400123 2,602 100 400133 2,708 50 400152 4,936 50
1 3/4 400124 2,781 100 400134 2,893 50 400153 5,251 50
2 400125 2,781 100 400135 3,024 50 400154 5,499 20
2 1/4 210025 3,197 50 400136 3,486 50 400155 5,976 20
2 1/2 701059 3,350 50 400137 3,636 50 400156 6,143 20
2 3/4 210026 3,607 50 400138 3,949 50 400157 6,560 20
3 400127 3,675 20 400139 4,293 50 400158 6,743 20
3 1/4 210027 4,889 50 400140 5,133 50 701096 7,536 10
3 1/2 400128 4,755 50 400141 5,133 20 400159 7,863 10
4 400129 5,507 20 400142 6,104 25 400160 9,342 10
4 1/2 210028 8,129 50 400143 7,293 25 400161 9,642 15
5 210029 7,909 25 400144 8,979 25 400162 10,634 15
5 1/2 210030 9,266 50 400145 9,886 20 400163 13,575 20
6 210031 9,276 25 400146 10,233 20 400164 14,792 20
6 1/2 400147 20,301 20 400165 30,567 10
7 400148 20,708 15 400166 31,420 10
7 1/2 210032 21,520 15 210035 32,625 10
8 400149 23,051 25 400167 33,711 10
8 1/2 210036 45,344 10
9 210037 44,205 10
10 210038 57,841 10
3. Material : Unbrako High Grade Alloy Steel.
18 Toll Free : 1800.102.3911 April 2019

THE WORLD LEADER

3/4” 7/8” 1”
Diameter
100 Pcs 100 Pcs 100 Pcs
1 210039 14,076 50
1 1/4 400168 13,694 10
1 1/2 400169 12,078 10 400187 19,451 10 210054 18,233 15
1 3/4 400170 12,353 10 210043 20,785 10 210055 18,949 15
2 400171 12,699 10 400188 20,220 10 400194 19,313 10
2 1/4 400172 12,973 10 404637 22,389 10 404571 21,400 10
2 1/2 400173 12,973 10 400189 21,782 10 400195 21,400 10
2 3/4 400174 14,362 10 210044 25,178 10 210056 24,103 10
3 400175 14,764 10 400190 24,543 10 400196 23,448 10
3 1/4 400176 15,338 10 701133 27,824 10 210057 25,856 10
3 1/2 400177 14,922 10 400191 27,068 10 400197 25,856 10
4 400178 16,083 10 400192 28,558 10 400198 28,560 5
4 1/2 400179 19,021 10 701136 33,580 10 400199 31,992 5
5 400180 20,666 10 701137 37,083 10 400200 35,439 5
5 1/2 701121 23,506 10 210047 38,611 10 183785 36,888 5
6 400182 25,801 10 400193 42,272 10 400201 41,167 5
6 1/2 400183 32,981 10 210048 73,389 5 210059 67,728 5
7 400184 33,745 10 701139 73,389 5 400202 70,164 5
7 1/2 210040 35,476 10 210050 76,042 5 210060 72,673 5
8 400185 35,211 10 210051 75,580 5 400203 75,109 5
8 1/2 210041 41,998 10 210052 81,989 5 210061 82,133 5
9 400186 41,998 10 210053 81,989 5 210062 84,499 5
10 701127 46,664 5 551078 93,305 5 210063 93,888 5
April 2019 Toll Free : 1800.102.3911 19

THE WORLD LEADER
Countersunk Socket Head Cap Screws (CSK) Metric

M3 M4 M5 M6 M8
Diameter Wrench Key Size 2mm Wrench Key Size 2.5mm Wrench Key Size 3mm Wrench Key Size 4mm Wrench Key Size 5mm
Length ` Price/ ` Price/ ` Price/ ` Price/ ` Price/

Part No. Part No. Part No. Part No. Part No.
100 Pcs 100 Pcs 100 Pcs 100 Pcs 100 Pcs
6 106283 876
8 103303 1,033 103309 561 103318 831 103325 642
10 103304 1,110 103311 561 103319 546 103328 647
12 103305 1,191 103312 566 103320 595 103329 630 103337 843
14 401676 618 401678 688
16 103306 1,349 103313 639 103321 639 103330 708 103338 820
18 401675 651 401677 647 401679 733 401681 831
20 103308 1,508 103315 659 103322 654 103331 756 103340 880
25 106284 1,668 103316 809 103323 769 103332 862 103341 1,009
30 103317 977 103324 977 103333 992 103342 1,154
35 220001 2,028 106289 1,301 103334 1,127 103343 1,313
40 220002 2,169 220005 2,028 103335 1,326 103344 1,538
45 220003 2,440 220006 2,283 220008 2,361 106297 1,727
50 220004 2,711 220007 2,534 220009 2,954 220011 2,707
55 220010 3,248 220012 3,232
60 220013 3,525
Qty. Per Box 200
M10 M12 M16 M20 M24

Diameter
Wrench Key Size 6mm Wrench Key Size 8mm Wrench Key Size 10mm Wrench Key Size 12mm Wrench Key Size 14mm
Length Part No. ` Price/ ` Price/ ` Price/ ` Price/ ` Price/
12 103345 1,442
16 103347 1,371
20 103348 1,178 103353 2,659
25 103349 1,368 103354 2,498
30 103350 1,568 103355 2,861 103359 5,377
35 103351 1,803 103356 3,077 103360 5,795 106328 13,436
Quantity per box 25
40 103352 2,066 103357 3,317 103361 6,039 106332 11,657

45 106302 2,325 106311 3,755 106318 6,815 106334 12,506
50 106303 2,624 103358 4,096 103362 6,847 106335 13,332 220032 22,628
55 106304 3,232 106312 4,673 106320 7,847 106336 14,150 220033 24,525
60 220014 3,525 106313 5,036 103363 8,280 106337 14,964 401689 26,420
65 220015 3,819 220020 5,728 183908 8,713 183912 15,812 220034 28,316
70 220016 4,113 220021 6,168 106321 9,148 106338 16,660 401690 30,213
75 220017 5,288 220022 6,610 220025 11,272 183913 18,110 220035 32,109
Quantity per box 200
80 220018 5,640 220023 7,650 220026 11,781 106339 20,748 401691 34,004
90 220019 6,345 106325 12,877 106341 21,566 401692 37,798
100 629621 15,223 106342 26,770 401693 42,980
110 220029 29,598 701356 48,162
120 220030 32,424 183179 53,346
130 220031 34,922 701358 58,529
Qty. Per Box 100 50 25 10 5
1. Note : All sizes are fully threaded. 2. Specifications : Generally conforming to IS 6761, ISO 10642
3. Threads : ISO Metric, 4g6g as per IS 4218. 4. Material : UNBRAKO high grade alloy steel.
5. Mechanical Properties : Property Class 12.9 as per IS 1367, ISO 898 Part - l
6. Bold black lines are used to indicate quantity per box.
20 Toll Free : 1800.102.3911 April 2019

THE WORLD LEADER
Socket Low Head Cap Screws (LHCS) Metric

M4 M5 M6 M8
Diameter
Length ` Price/ ` Price/ ` Price/ ` Price/

100 Pcs 100 Pcs 100 Pcs 100 Pcs
8 106250 1,103 106262 1,103 106263 1,103
10 106251 851 103500 756 103508 734
12 106255 767 103501 767 103509 737 103519 957
15 400790 1,040 400792 1,008 400791 1,172
16 106256 819 103502 749 103511 710 103520 869
20 106257 903 103597 794 103512 794 103521 901
25 106260 903 103503 856 103515 879 103525 963
30 406185 1,512 103505 972 103516 965 103526 1,083
35 103517 1,061 103528 1,174
40 103518 1,575 103529 1,264
45 106264 1,748
Qty. Per Box 200
M10 M12 M16 M20

DIA
Length ` Price/ Box Qty ` Price/ Box Qty ` Price/ Box Qty ` Price/ Box Qty
100 Pcs 100 Pcs 100 Pcs 100 Pcs
16 103532 1,324 200
20 103533 1,170 200 103549 3,255 100
25 103534 1,293 200 103550 2,888 100
30 103535 1,449 200 103551 2,783 100 103562 5,718 25
35 103536 1,533 200 103552 2,814 100 103563 6,146 25
40 103538 1,654 100 103553 2,835 50 103564 6,039 25 103578 14,385 25
45 106271 2,814 100 106277 5,718 25
50 103541 3,058 100 103554 3,057 50 103565 6,508 25 103580 16,905 25
55 106272 3,310 100
60 103555 4,417 50 103566 9,542 25 103581 19,425 25
90 103574 13,608 25
100 103575 14,650 25 103599 30,135 25
1. Specifications : Generally conforming to Unbrako Specification DIN 7984 + 6912 (Except for Head & Socket Dims), ASME B18.3.1M
2. Threads : ISO Metric (Coarse Series) 4g6g.
3. Mechanical Properties : Property Class 10.9 as per IS 1367, ISO 898 Part I.
4. For sizes beyond those listed, prices on application.
who may not haveconsidered hydrogen embrittlement problem.
April 2019 Toll Free : 1800.102.3911 21

THE WORLD LEADER
Socket Head Shoulder Screws Metric

M6 (M5) M8 (M6) M10 (M8) M12 (M10)
Diameter
100 Pcs 100 Pcs 100 Pcs 100 Pcs
10 105364 4,352 50
12 105365 4,722 50 105375 4,345 50
15 401484 5,454 50 401486 5,459 50 401487 6,650 50 401485 14,438 25
16 105366 5,454 50 105377 5,601 50 105388 6,840 50 105404 8,889 25
20 105368 6,186 50 105379 6,286 50 105390 7,598 50 105406 9,780 25
25 105370 7,102 50 105380 7,145 50 105392 8,552 50 105407 10,900 25
30 105372 8,020 50 105381 8,007 50 105393 9,500 50 105410 12,019 25
40 105373 9,458 50 105383 9,725 50 105394 11,397 50 105411 14,256 25
50 105386 10,679 50 105395 11,970 50 105412 15,942 25
60 105396 12,651 50 105416 18,105 25
70 105402 14,251 50 105417 19,236 25
80 106422 15,831 50 105420 20,111 25
90 105427 20,352 25
100 105433 23,989 25
M16 (M12) M20 (M16) M24 (M20)

Diameter
100 Pcs 100 Pcs 100 Pcs
30 105434 18,493 25
40 105435 21,744 25 105441 50,730 10
50 105436 24,994 25 105442 57,379 10 401488 175,459 5
60 105437 28,243 25 105444 64,026 10 401489 191,976 5
70 105438 31,494 25 105448 70,676 10 401490 208,492 5
80 105440 33,584 25 105449 77,324 10 401491 225,015 5
90 106343 34,827 25 105450 83,974 10 401492 241,530 5
100 106344 41,243 25 106347 90,620 10 401493 258,047 5
120 106346 63,655 25 106348 103,917 10 401494 291,085 5
1. Specifications : Generally conforming to BS 4168, DIN 9841, ISO 7379.

2. Thread Class : 4g6g (Precision Ground to h8 tolerance on the Shoulder (Size Indicator Ground Diameter)
4. Mechanical Properties : Properties Class conforming to 12.9 as per ISO 898 Part - I.
5. Method of Specifying : The nominal diameter of a shoulder screw is the diameter of the shoulder & not the thread diameter
but it is recommended that both are quoted, e.g. 16mm (M12) x 70mm long to BS 4168.
22 Toll Free : 1800.102.3911 April 2019

THE WORLD LEADER
Socket Set Screws (Grub Screws)

Knurled Cup Point Metric
M3 M4 M5 M6 M8
Diameter
Wrench Key Size 1.5mm Wrench Key Size 2mm Wrench Key Size 2.5mm Wrench Key Size 3mm Wrench Key Size 4mm

3 104076 355
4 103172 359 103182 294
5 103175 364 103185 294 103194 205
6 103176 351 103186 298 103195 208 103207 217 180002 428
8 103177 356 103187 319 103196 208 103208 236 103224 261
10 103178 375 103188 324 103197 226 103209 266 103227 273
12 103179 399 103189 359 103198 273 103211 305 103228 331
16 103180 525 103191 490 103199 317 103212 390 103229 402
20 551093 551 103193 595 103202 389 103214 421 103230 521
25 701961 645 103203 426 103217 544 103231 645
30 406498 1,175 103204 594 103218 718 103235 754
35 551679 1,563 181179 924 103219 1,101 103236 1,009
40 551680 2,011 551094 1,155 103220 1,245 103237 1,194
45 103221 1,325 701998 1,305
50 103222 1,558 103240 1,494
55 551095 2,582
60 551096 2,818
65 551097 3,261
Qty. Per Box 200
1. Specification : Generally conforming to the following standards

2. Threads : ISO Metric, 4g6g as per IS 4218, ISO 261, ISO 965.
4. Mechanical Properties : Property Class 45H as per IS 1367, ISO 898 Part V.
5. NOTE : PRICE FOR SPECIAL POINTS SHOWN BELOW WILL BE 25% EXTRA.
Orders for sizes with special points will be accepted subject to our confirmation.
FLAT CONE DOG / HALF DOG PLAIN CUP

IS 6094 6094 6094 6094
DIN 913 914 915 916
ISO ISO-4026 ISO-4027 ISO-4028 ISO-4029
April 2019 Toll Free : 1800.102.3911 23

THE WORLD LEADER

Knurled Cup Point Metric
M10 M12 M16 M20
Diameter

100 Pcs 100 Pcs 100 Pcs 100 Pcs
8 180099 549
10 103241 427 551687 840
12 103244 497 103256 705
16 103245 663 103258 843 106352 1,920
20 103246 817 103259 1,069 103274 1,932 104149 6,321
25 103247 989 103260 1,466 103276 2,619 103286 7,053
30 103249 1,424 103261 1,695 103277 3,101 103287 8,154
35 103251 1,644 103262 2,300 103278 3,878 103288 9,296
40 103252 1,825 103263 2,552 103279 4,496 103289 10,395
45 103253 2,090 103269 2,834 103281 4,979 103290 11,541
50 103254 2,422 103270 3,093 103282 5,976 103292 12,625
55 551098 4,007 103271 5,341 103283 7,585 103293 14,928
60 183091 4,468 103272 5,999 103284 8,115 103294 15,862
65 551099 4,663 551100 7,482 551102 9,613 551105 17,876
70 551101 8,060 182790 12,236 551106 18,871
75 551103 13,718 551107 20,516
80 551104 14,634 793979 22,714
Qty. Per Box 100 50
1. Specifications : Generally conforming to the following standards Quantity per box 200
2. Threads : ISO Metric, 4g6g as per IS 4218, ISO 261, ISO 965.
4. Mechanical Properties : Property Class 45H as per IS 1367, ISO 898 Part V.
5. NOTE : PRICE FOR SPECIAL POINT SHOWN BELOW WILL BE 25% EXTRA.
Orders for sizes with special points will be accepted subject to our confirmation.
FLAT CONE DOG / HALF DOG PLAIN CUP

IS 6094 6094 6094 6094
DIN 913 914 915 916
ISO ISO-4026 ISO-4027 ISO-4028 ISO-4029
24 Toll Free : 1800.102.3911 April 2019

THE WORLD LEADER

Knurled Cup Point Inch
3/16” 1/4” 5/16” 3/8”
Diameter
Wrench Key Size 3/32” Wrench Key Size1/8” Wrench Key Size 5/32” Wrench Key Size 3/16”

100 Pcs 100 Pcs 100 Pcs 100 Pcs
3/16 400949 214
1/4 400951 208 400961 247
5/16 400952 219 400963 261 400986 261
3/8 400953 226 400965 273 400977 273 400988 320
1/2 400954 260 400967 278 400978 285 400989 432
5/8 551209 293 400969 362 400979 352 400990 510
3/4 400956 359 400970 550 400980 461 400991 629
1 400957 509 400972 536 400982 645 400993 769
1 1/4 400973 624 400984 761 400994 1,106
1 1/2 400974 1,055 400983 1,546 400995 1,960
1 3/4 551108 1,336 551109 1,652 400996 2,367
2 180730 1,412 400985 1,955 400997 2,795
Qty. Per Box 200 100
1/2” 5/8” 3/4”

Diameter
Length ` Price/ ` Price/ ` Price/

100 Pcs 100 Pcs 100 Pcs
1/2 401003 729
5/8 401005 818 401015 1,931
3/4 401006 1,032 401016 1,990 401024 4,410
1 401008 1,275 401017 2,297 401025 5,310
1 1/4 401009 1,780 401018 2,984 551110 6,542
1 1/2 401010 4,131 401019 5,598 401026 9,097
1 3/4 401012 5,380 401020 7,548 401027 10,710
2 401013 5,885 401021 6,864 401028 12,600
2 1/2 401014 7,411 401022 10,001 401029 15,425
3 702408 9,086 401023 12,140 401030 18,582
Qty. Per Box 100 50
1. Specifications : As per standard ASME/ANSI B18.3.

2. Threads : BS Whitworth, Medium as per BS 84
4. Mechanical Properties : As per BS 2470.
5. NOTE : PRICES FOR SPECIAL POINTS 25% EXTRA.
6. Socket set screws with BSF/UNC/UNF threads can also be manufactured subject to MOQ. Price on request.
April 2019 Toll Free : 1800.102.3911 25

THE WORLD LEADER
Button Head Socket Screws Metric

M3 M4 M5 M6
Diameter
Wrench Key Size 2mm Wrench Key Size 2.5mm Wrench Key Size 3mm Wrench Key Size 4mm
100 Pcs 100 Pcs 100 Pcs 100 Pcs
5 180248 764 200
6 106353 764 200 180200 552 200 180398 1,054 200
8 106354 620 200 106360 552 200 180175 1,044 200 180249 1,990 200
10 106357 711 200 106361 552 200 106365 552 200 106372 725 200
12 106358 791 200 106363 606 200 106366 606 200 106373 738 200
15 401218 738 200 401219 711 200 401222 843 200
16 106359 1,001 200 106364 738 200 106367 711 200 106374 843 200
18 406269 1,555 200 401223 843 200
20 106368 843 200 106375 909 200
22 401220 1,818 200
25 106369 1,001 200 106376 948 200
30 106370 1,133 200 106378 989 200
M8 M10 M12
Diameter
100 Pcs 100 Pcs 100 Pcs
10 106379 1,213 200
12 106380 1,028 200
15 401226 1,054 200
16 106382 1,054 200 106392 2,107 200 106403 3,557 100
20 106384 1,079 200 106393 1,435 200 106404 3,820 100
25 106385 1,265 200 106396 1,647 200 106405 3,978 100
30 106386 1,449 200 106399 1,845 200 106406 4,452 100
35 106389 1,765 200 106401 2,069 200 106407 4,927 100
40 106390 1,976 200 106402 2,292 100 106408 5,400 50
50 106413 6,349 50

2. Thread : ISO Metric (Coarse Series) 4g6g.
4. Mechanical Properties : Properties Class conforming to 12.9 as per BS 6104, ISO 898 Part - I.
26 Toll Free : 1800.102.3911 April 2019

THE WORLD LEADER
Flange Button Head Socket Screws Metric

M3 M4 M5
Diameter
Wrench Key Size 2mm Wrench Key Size 2.5mm Wrench Key Size 3mm
100 Pcs 100 Pcs 100 Pcs
6 404977 1,301 200
8 404982 1,146 200
10 404983 1,331 200 404988 1,185 200
12 404984 1,475 200 404989 1,290 200
16 404986 1,704 200 404991 1,555 200
20 404992 1,634 200
25 404994 1,739 200
M6 M8 M10
Diameter
100 Pcs 100 Pcs 100 Pcs
10 180079 1,700 200 405005 3,610 200
12 404997 1,673 200 405007 1,634 200
16 404999 1,962 200 405009 1,896 200 405016 3,293 200
20 405001 2,243 200 405011 2,134 200 405017 3,689 200
25 405003 2,596 200 405012 2,464 200 405018 4,190 200
30 405004 2,951 200 405013 2,793 200 405019 4,703 200
40 405015 3,425 200
1. Specification : Generally conforming to Unbrako specification.

2. Thread : ISO Metric (Coarse Series) 4g6g.
4. Mechanical Properties : Properties Class conforming to 12.9 as per ISO 898 Part - I.
April 2019 Toll Free : 1800.102.3911 27

THE WORLD LEADER
Hexagon Wrenches
Length ` Price/ Box Qty Length ` Price/ Box Qty
Part No. Part No.
100 Pcs 100 Pcs
1/16 108468 1,118 100 1.5 125648 1,118 100
5/64 110164 1,233 100 2 122263 1,118 100
3/32 110180 1,233 100 2.5 122270 1,118 100
1/8 110213 1,233 100 3 121093 1,233 100
5/32 110246 1,461 100 4 119953 1,935 100
3/16 115915 1,891 100 5 122245 2,360 100
7/32 115948 2,571 50 6 121066 3,360 50
1/4 115981 3,725 50 8 115557 6,328 50
5/16 115997 6,189 25 10 120859 10,561 25
3/8 116013 9,155 25 12 120806 19,868 25
1/2 116046 21,122 10 14 111100 29,224 25
9/16 116063 27,025 10 17 138487 46,219 10
5/8 116080 39,461 10 19 111133 63,780 10
3/4 116096 63,811 10 22 402603 100,526 5
24 402604 135,159 5
27 402605 227,541 2
32 402606 400,157 2
Hex Wrench Sets

STANDARD (METRIC)
Sets Wrenches Box Set Part No. ` Price/100 Pcs Box Qty
Standard 1.5mm, 2mm, 2.5mm, 3mm, 4mm,

402616 34,700 50
(Metric) 5mm, 6mm, 8mm, 10mm, Set of 9
STANDARD (INCH)
Sets Wrenches Box Set Part No. ` Price/100 Pcs Box Qty
Standard 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”

402615 36,400 50
(Inch) 7/32”, 1/4”, 5/16”, 3/8”, Set of 10
1. Specifications :
A. Inch Series : BS 2470 B. Metric Series : IS 3082, DIN 911.
2. Material : UNBRAKO high grade alloy steel.
3. Mechanical Properties : Hardness : HRC 47 (Min).
4. Plating : No guarantee can given for Unbrako Products which are plated by users or by outside plates,
28 Toll Free : 1800.102.3911 April 2019

THE WORLD LEADER
Dowel Pins Metric

Diameter M2 M3
Length ` Price/ Box Qty ` Price/ Box Qty

Part No. Part No.
100 Pcs 100 Pcs
8 407831 958 40
10 407832 970 40 115001 1,104 40
12 407833 983 40 115002 1,116 40
14
16 407835 1,007 40 115003 1,164 40
18 407836 1,007 40 402118 1,189 40
20 407837 1,019 40 115004 1,200 40
24
28 402120 1,335 40
30 115007 1,394 40
32 402121 1,455 40
36 406345 1,577 40
40 402124 1,698 40
Diameter M4 M5

Part No. Part No.
100 Pcs 100 Pcs
10 115010 1,225 40 402133 1,285 40
12 115011 1,261 40 115021 1,322 40
14 402134 1,359 40
16 115012 1,335 40 115022 1,394 40
18
20 115015 1,394 40 115024 1,479 40
24 407127 1,468 40 407128 1,552 40
28 402128 1,577 40 402137 1,685 40
30 115017 1,650 40 115026 1,770 40
32 402138 1,844 40
36 406347 2,001 40
40 115028 2,159 40
50 402132 2,413 40 115031 2,596 40
1. Specifications : Generally conforming to DIN 6325.

Unbrako dowel pins are through hardened and precision ground from nominal to 0.0002” over size on Inch sizes and
a surface finish of 0.15 micrometers max. On both Metric and Inch products.
Genuine Unbrako Dowel Pins should only be supplied against these List Prices.
CAUTION: Unbrako advise that correct tools should be used for the application.
Safety goggles should be worn for your security and protection.
3. Plating : No guarantee can given for Unbrako products which are plated by users or by outside plates, who may not have
April 2019 Toll Free : 1800.102.3911 29

THE WORLD LEADER
Dowel Pins Metric

Diameter M6 M8 M10
100 Pcs 100 Pcs 100 Pcs
12 402141 1,613 40
16 115032 1,722 40
18 402143 1,770 40
20 115034 1,831 40 115049 2,571 40 115063 3,542 40
24 115037 1,940 40 406349 2,765 40 406351 3,844 40
28 402145 2,098 40 402150 3,007 40
30 115038 2,196 40 115053 3,153 40 115066 4,414 40
32 402146 2,292 40 402151 3,287 40
36 406348 2,486 40 406350 3,566 40 406352 5,021 40
40 115043 2,681 40 115055 3,833 40 115070 5,433 40
45 115056 4,233 40 115071 6,015 40
50 115046 3,201 40 115057 4,584 40 402161 6,536 40
55 402153 4,948 40
60 115047 3,687 40 115058 5,299 40 402163 7,592 40
70 402164 8,647 40
90 402167 10,769 40
100 402169 11,848 40
Diameter M12 M16

Part No. Part No.
100 Pcs 100 Pcs
24 406353 4,899 40
30 402174 5,664 40
32 406218 11,061 20
36 406354 6,476 40
40 402178 7,021 40 406220 13,268 20
50 402180 8,465 40
60 402182 9,860 40
70 402183 11,254 40 406225 21,878 20
80 402184 12,649 40 406226 24,740 20
90 406227 27,627 20
100 402186 15,486 40
1. Specifications : Generally conforming to DIN 6325.

Unbrako dowel pins are through hardened and precision ground from nominal to 0.0002” over size on Inch sizes and
a surface finish of 0.15 micrometers max. On both Metric and Inch products.
Genuine Unbrako Dowel Pins should only be supplied against these List Prices.
CAUTION: Unbrako advise that correct tools should be used for the application.
Safety goggles should be worn for your security and protection.
30 Toll Free : 1800.102.3911 April 2019

Durlok
Page Contents
®
34 Durlok Screws
35 Durlok® Nuts
®
35 Durlok Washers
THE WORLD LEADER
®
Durlok Anti-Vibration
self-locking fasteners
Why do fasteners rotate loose under How does DURLOK® work? Advantages of DURLOK®
vibration? Durlok® Free Spinning Self-locking Durlok® Bolts & Nuts are suitable for
The basic design & function of a fasteners come with all the benefits multiple re-use because the serrations
threaded fastener is to join multi- of serrated fasteners but with none do not groove the clamped material
-component assemblies so that the of the disadvantages. Unlike serrated and maintain locking ability. .
whole assembly performs as a single fasteners, with the unique Durlok® tooth
component. . formation, the locking is caused by the The Durlok® fastener system is effective
elastic spring back of the material at on a wide variety of engineering
In most cases, even in preloaded joints, clamping load. A little wall of material materials including steel both heat-
the external forces create minimal builds up behind each tooth thereby -treated and non heat-treated, cast
relative displacements between the blocking the bolt from turning. . irons including nodular types, non-
clamped parts, resulting in small sliding -ferrous metals and sheet materials. .
movements both in threads and under Durlok® is designed with long, ramp
the head. Thus, the fastener becomes shaped, radial teeth blended evenly The presence of oil or other lubricants,
free of friction in a circumferential into a smooth slightly conical outer organic or inorganic coatings will not
direction and the internal loosening bearing surface. It is this plain outer adversely affect the locking ability.
or “off-torque” created by the preload bearing ring that prevents excessive In addition, the corrosion resistance of
on the threads will rotate the fastener penetration into the bearing material, protected surfaces will generally be
loose. . together with the long radial teeth maintained because the smooth
which embed with only moderate annular ring of Durlok® fastener
In addition to self-loosening, fatigue edge pressure just sufficient to shields the bearing area against liquid
failures can occur because the fastener guarantee self-locking. . penetration. .
will lose preload as soon as partial
loosening takes place. Durlok® Bolts of strength grade 12.9 Durlok® Fasteners can be used at
are manufactured from alloy steel and elevated temperatures up to 300°C.
are through hardened to give the same
hardness from the tooth surface to the
core. These are typically heavy duty
S D S D S D S D
bolts and can be used for all joints

AD 2000 15048 ISO IATF ISO OHSAS
14399 9001 16949 14001 18001 subjected to high loads.
32 Toll Free : 1800.102.3911 April 2019

®
Durlok Anti-Vibration THE WORLD LEADER
self-locking fasteners
Will not loosen or unscrew even Unique head design ensures

under the most severe transverse absence of ‘notch-effect’
jarring and vibration. after assembly
Effectiveness at elevated ® Bolt Embedding is no greater

lok
r
than with standard

Du
temperatures upto 300° C Durlok®

Nu
is ensured. t types of fasteners.
Closely controlled
Reusability is guaranteed with manufacturing for
locking ability maintained. Advantages extra safety and reliability.
During the 1960's, Dr. Junker while working in Unbrako's Koblenz

facility in Germany completed his seminal work on the self-loosening Vibration Resistance Testing / Junker Test
behavior of bolted joints. This in turn led to the design of the original
Durlok® anti-vibration nuts & bolts. The Durlok 12.9 nuts & bolts are ®
Durlok Bolt & Nut vs 2 Pairs of Washers
Percentage of preload Remaining
Setting:
Frequency : 12.5 Hz
Durlok Bolt & Nut
2 Pairs of Durlok Washers
designed for high-performance critical applications and do not require M8 Bolt - Half Load Clamp Length: 30.00mm
Tighten at B
2 Pairs of Competitor Washer
No Washer
a washer. However, our industrial OEM customers requested a Durlok 100%
90%
product in washer form for applications where it was deemed desirable
Percentage of Remaining Clamp Load
80%
to use a washer in the joint design. Thus we began researching and 70%
developed Unbrako's new Durlok locking wedge washer. 60%
50%
40%
The Durlok® washer when used in combination with 30%
standard hex helps achieve self-locking properties. 20%
It is an anti-vibration solution that not only prevents 10%
bolted joint failure, but also enables the bolted joint 0%

250 500 750 1000 1250 1500 1750 2000
to retain its pre-load, thus reducing maintenance No. of Cycles
requirements. The test regime highlighted this

feature (fig 1).
Durlok® Applications
Automotive Engines Electrical equipments
Power Unit Accessories Construction Machinery and
Transmission Units Ancillary Equipments
Frames and Chassis Units Agriculture Machinery
Bodywork Percussion Drilling Tools
Vibratory Feeders & Power Wrenches
Shaking Chutes, Hoppers Domestic Appliance
THE WORLD LEADER
®
Durlok Screws
The Durlok 12.9 nuts & Screws are designed for high-performance critical anti-vibration applications and do not require a washer. Metric
Diameter M6 M8 M10 M12
100 Pcs 100 Pcs 100 Pcs 100 Pcs
12 190540 3,030 200 190570 3,109 200
16 190560 2,318 200 190590 2,741 200 190620 3,624 200
20 190160 2,556 200 190210 2,964 200 190270 2,832 200 183640 5,216 100
25 190170 2,846 200 190220 3,268 200 190280 3,083 200 190320 5,348 100
30 190180 3,135 200 190230 3,557 200 190290 3,359 200 190330 5,400 100
35 190600 3,872 200 190630 4,190 200 190660 5,534 100
40 190240 4,162 200 190300 4,506 100 190340 5,955 50
45 408127 4,874 200 190640 4,821 100 190670 6,349 50
50 190610 5,216 100 190310 5,138 100 190350 6,744 50
55 190680 7,140 50
60 407393 5,857 200 190360 7,930 50
70 190700 8,774 50
80 190710 9,591 50
Diameter M14 M16 M20
100 Pcs 100 Pcs 100 Pcs
25 190730 10,354 25
30 190370 10,802 25 190410 23,132 25
35 190740 11,461 25 190420 23,132 25
40 190380 11,592 25 190430 23,132 25 190875 38,202 25
45 190750 11,935 25 190820 18,152 25 405793 33,592 25
50 190760 12,646 25 190440 18,653 25
55 405105 19,628 25
60 190770 13,594 25 190450 20,998 25 190885 37,675 25
70 190460 22,973 25 190890 39,519 25
80 190855 23,976 25 190900 42,945 25
90 190860 25,898 25 190910 46,369 25
100 190870 27,796 25
1. Specification : Conforming to Unbrako Standard. (Separate catalogue available on request).

2. Thread : Conforming to DIN 13 Medium Fit (6g)
4. Mechanical Properties : Property Class 12.9 as per 898 part - l.
34 Toll Free : 1800.102.3911 April 2019

THE WORLD LEADER
Durlok® Nuts
Length Part No. ` Price/100 Pcs Box Qty
M6 404916 860 200

M8 404917 1,293 200
M10 405202 1,955 200
M12 404918 3,595 100
M14 405240 5,505 50
M16 404915 6,629 50
M20 403618 14,044 50
1. Specification: conforming to Unbrako Standard. 2. Thread: According to DIN 13 6H.

3. Material: Unbrako high grade alloy steel. 4. Mechanical Properties: Property Class 12.
Durlok® Washers
Durlok®Washers are used with standard Hex bolt & nut for self-locking anti-vibration properties.
Length Part No. ` Price/100 Pcs Box Qty Length Part No. ` Price/100 Pcs Box Qty
M6 551087 2,468 200 M18 550262 9,675 100

M6L 551088 3,218 200 M18L 550263 17,073 100
M8 551089 3,218 200 M20 550264 9,675 100
M8L 550253 4,358 200 M20L 550265 17,073 100
M10 550254 4,358 200 M22 550266 13,373 100
M10L 550255 4,553 200 M22L 550267 25,324 100
M12 550256 4,553 200 M24 550268 17,073 100
M12L 550257 6,687 100 M24L 550269 30,730 50
M14 550258 6,687 100 M27 550270 24,612 50
M14L 550259 9,675 100 M27L 550271 30,730 50
M16 550260 6,260 100 M30 550272 26,462 50
M16L 550261 9,675 100 M30L 550273 38,982 25
1. Note: L = Larger Outer Dia

2. Inch series available on request.
3. Stainless Steel prices available on request.
4. Plating: No guarantee can given for Unbrako products which are plated by users or by outside plates,
April 2019 Toll Free : 1800.102.3911 35

Page Contents
38 Hex Head Bolts/Screws - Grade 10.9
43 Hex Head Bolts/Screws - Grade 8
47 Hex Nut - Grade 8 / 10
48 Hexagon Weld Nut
49 Nylock Nut Blue Ring DIN 985 - Grade 8 /10
49 Nylock Nut Blue Ring ISO 7040 - Grade 8 /10
49 All Metal Prevailing Torque Nut DIN 980M & DIN 980V
50 Spring Washer - Square Section
50 Spring Washer - Flat Section
50 Hardened Washer
Hex Head Bolts / Screws
In-house Destructive And Non destructive Testing:
Chemical product check analysis Hardness tests Grains size
Heat treatment tests UTS test Decarburization tests
Room temprature tension tests (or at 0° C) Proof load test Ultra soud testing
Low temperature impact tests (upto -196° c) Macrotech tests M.P.I tests
X-Ray Fluorescence Analysis Microtech tests Stress rupture tests
ROLLED THREADS : Rolling threads results in best quality highest

-strength thread because of; (1) more accurate and uniform
thread dimensions, giving a better fit between threaded
parts and fewer concentrated loads at points of misfit;
(2) smoother thread surfaces &, thus, fewer scratches
and other markings to initiate cracks, or galling; and
(3) higher yield, tensile, & shear properties to better
withstand service loads.
ECONOMY : Fewer high strength bolts are required

than M. S. bolts and rivets. Drilling of close holes is
not required. Overall weight the structure will be very
light.
SIMPLICITY : A minimum of skill is required in tightening

and the operators need only to follow a few simple rules.
Comparison of Different Grades

THE WORLD LEADER
10.9 Hex Head Bolts/Screws Metric

DIA M4 M5 M6 M8
` Price/ Box ` Price/ Box ` Price/ Box ` Price/ Box

Length Part No. Part No. Part No. Part No.
100 pcs Qty 100 pcs Qty 100 pcs Qty 100 pcs Qty
8 550616 320 500 550628 503 500
10 170001 287 500 170013 304 500 170029 393 500 550642 710 500
12 170002 297 500 170014 308 500 170030 416 500 170049 600 500
16 170003 488 500 170015 487 500 170031 430 500 170050 608 200
18 170004 488 500 170016 499 500 170032 436 500 170051 548 200
20 170005 422 500 170017 402 500 170033 430 500 170052 548 200
22 170006 428 500 170018 427 500 170034 442 500 170053 620 200
25 170007 428 500 170019 422 500 170035 444 500 170054 601 200
30 170008 427 500 170020 455 500 170036 465 500 170055 673 200
35 170009 439 500 170021 460 500 170037 498 200 170056 789 200
40 170010 466 500 170022 488 500 170038 523 200 170057 836 200
45 170011 525 500 170023 533 500 170039 555 200 170058 904 200
50 170012 583 500 170024 641 500 170040 595 200 170059 984 200
55 240001 641 500 170025 675 500 170041 653 200 170060 1,078 100
60 240002 700 500 170026 736 200 170042 714 200 170061 1,216 100
65 170027 836 200 170043 775 100 170062 1,255 100
70 170028 902 200 170044 835 100 170063 1,355 100
75 240003 967 200 170045 842 100 170064 1,397 100
80 170046 887 100 170065 1,448 100
90 170047 1,000 100 170066 1,872 100
100 170048 1,111 100 170067 2,255 50
110 551178 1,709 100 240010 3,178 50
120 550866 1,858 100 240011 3,505 50
130 550867 2,002 100 240012 3,837 50
140 550868 2,149 100 550872 4,246 50
150 550869 2,295 100 550873 4,518 50
160 787951 4,777 50
170 787952 5,024 50
180 787953 5,308 50
190 787954 5,555 50
200 787955 5,815 50
1. Speci cations : Generally conforming to IS 1364, ISO 4014/4017.
2. Threads : ISO Metric 6g as per IS 4218.
3. Material and Mechanical Properties : Property Class 10.9 as per IS 1367.
4. Note : Prices for fully threaded screws beyond shaded sizes will cost 10% extra.
5. Orders for Property class 8.8 can be accepted subject to our con rmation on the basis of item wise quantities.
Price list for 8.8 available separately.
6. Upto 80mm Diameter can be manufactured against request.
8. Bolts/Screws as per DIN 931/933 will be manufactured against speci c order with minimum order quantity of each size.
38 Toll Free : 1800.102.3911 April 2019

THE WORLD LEADER

DIA M10 M12 M14 M16

16 170068 1,026 200 550673 1,911 100
18 170069 1,020 200
20 170070 962 200 170093 1,580 100 170142 3,573 50
22 170071 1,059 200 170143 3,573 50
25 170072 1,040 200 170094 1,716 100 170121 2,728 50 170144 3,599 25
30 170073 1,123 100 170095 1,703 100 170122 2,942 50 170145 3,943 25
35 170074 1,181 100 170096 1,798 100 170123 3,059 25 170146 3,943 25
40 170075 1,433 100 170097 2,047 100 170124 3,272 25 170147 3,903 25
45 170076 1,663 100 170098 2,271 50 170125 3,533 25 170148 4,138 25
50 170077 1,703 100 170099 2,428 50 170126 3,917 25 170149 4,446 25
55 170078 1,773 100 170100 2,604 50 170127 4,004 25 170150 4,942 25
60 170079 1,947 100 170101 2,716 50 170128 4,183 25 170151 5,213 25
65 170080 2,053 50 170102 2,839 50 170129 4,413 25 170152 5,346 25
70 170081 2,158 50 170103 3,210 50 170130 4,681 25 170153 5,704 25
75 170082 2,307 50 170104 3,325 50 170131 4,909 25 170154 6,117 25
80 170083 2,655 50 170105 3,528 50 170132 5,197 25 170155 7,020 25
90 170084 2,944 50 170106 3,800 25 170133 5,693 25 170156 7,501 25
100 170085 3,384 50 170107 4,439 25 170134 6,552 25 170157 7,785 15
110 170086 3,906 50 170108 4,848 25 170135 7,123 25 170158 8,636 15
120 170087 4,252 25 170109 5,138 25 170136 7,909 25 170159 9,865 15
130 170088 4,776 50 170110 5,431 25 170137 8,561 25 170160 11,601 15
140 170089 5,299 50 170111 6,445 25 170138 11,085 25 170161 11,760 15
150 170090 5,677 30 170112 8,610 25 170139 12,236 25 170162 13,384 15
160 170091 6,054 25 170113 9,027 20 170140 13,663 25 170163 14,536 15
180 170092 6,811 25 170114 9,813 20 170141 14,659 25 170164 16,348 15
200 550876 7,568 25 170115 12,968 25 550887 16,287 25 170165 17,697 10
220 170116 18,649 25 550888 22,230 20 170166 22,875 10
240 170117 19,109 20 550889 24,045 20 170167 24,617 10
260 170118 19,520 20 550890 25,860 20 170168 25,116 10
280 170119 21,317 18 550891 27,845 18 170169 27,727 10
300 170120 22,839 18 550892 29,716 18 170170 35,643 10
April 2019 Toll Free : 1800.102.3911 39

THE WORLD LEADER

DIA M18 M20 M22
` Price/ Box ` Price/ Box ` Price/ Box

Length Part No. Part No. Part No.
100 pcs Qty 100 pcs Qty 100 pcs Qty
30 550751 8,125 25
35 550735 6,516 25 170190 7,843 25
40 170171 7,007 25 170191 7,843 25 550775 10,628 10
45 170172 7,303 25 170192 8,216 25 550776 11,286 10
50 170173 7,529 25 170193 8,157 25 170215 11,630 10
55 170174 8,043 25 170194 9,264 25 170216 12,525 10
60 170175 8,296 25 170195 9,395 25 170217 12,935 10
65 170176 8,575 25 170196 9,509 10 170218 13,852 10
70 170177 9,367 25 170197 9,623 10 170219 14,333 10
75 170178 9,914 10 170198 10,676 10 170220 14,826 10
80 170179 9,933 10 170199 10,991 10 170221 15,428 10
90 170180 10,552 10 170200 11,680 10 170222 16,433 10
100 170181 11,692 10 170201 12,439 10 170223 17,528 10
110 170182 12,326 10 170202 14,000 10 170224 19,081 10
120 170183 13,601 10 170203 14,904 10 170225 20,395 10
130 170184 14,222 10 170204 16,217 10 170226 21,490 10
140 170185 14,843 10 170205 17,306 10 170227 22,566 10
150 170186 15,895 10 170206 17,009 10 170228 23,626 10
160 170187 17,117 10 170207 20,250 10 170229 26,951 5
180 170188 18,990 10 170208 23,709 10 170230 29,269 5
200 170189 20,517 10 170209 25,551 10 170231 31,623 5
220 240020 22,568 10 170210 35,450 5 170232 48,573 5
240 240021 24,623 10 170211 37,227 5 170233 52,616 5
260 240022 26,675 10 170212 39,006 6 170234 54,639 5
280 240023 28,727 8 170213 42,553 6 170235 60,730 5
300 240024 30,779 8 170214 46,081 6 170236 65,069 5
40 Toll Free : 1800.102.3911 April 2019

THE WORLD LEADER

DIA M24 M27 M30

40 550791 16,836 10
45 550792 17,871 10
50 170237 14,662 10 170259 29,392 5 170281 38,960 5
55 170238 14,030 10 170260 29,392 5 170282 38,960 5
60 170239 15,264 10 170261 29,392 5 170283 38,960 5
65 170240 15,795 10 170262 29,392 5 170284 38,960 5
70 170241 16,743 10 170263 29,392 5 170285 38,960 5
75 170242 17,346 10 170264 31,608 5 170286 38,960 5
80 170243 18,967 10 170265 33,075 5 170287 40,544 5
90 170244 20,253 10 170266 36,009 5 170288 44,010 5
100 170245 21,906 10 170267 38,960 5 170289 47,362 5
110 170246 22,896 5 170268 42,012 5 170290 52,097 5
120 170247 24,029 10 170269 43,077 5 170291 53,248 5
130 170248 25,342 5 170270 44,495 5 170292 55,646 5
140 170249 26,548 5 170271 47,312 5 170293 59,097 5
150 170250 27,845 5 170272 50,130 5 170294 62,416 3
160 170251 33,250 5 170273 55,364 5 170295 70,617 3
170 240025 34,700 5 550941 58,305 5 550947 74,182 3
180 170252 36,151 5 170274 61,249 5 170296 77,770 3
190 240026 37,576 5
200 170253 39,001 5 170275 66,716 5 170297 84,838 5
220 170254 55,912 5 170276 91,940 4 170298 102,359 3
240 170255 57,915 5 170277 99,141 4 170299 109,562 3
260 170256 59,920 4 170278 105,643 3 170300 116,778 3
280 170257 65,898 4 170279 112,128 3 170301 123,981 2
300 170258 80,560 4 170280 117,389 3 170302 131,167 2
April 2019 Toll Free : 1800.102.3911 41

THE WORLD LEADER

DIA M33 M36 M42 M48

70 550845 69,451 5
75 170303 53,480 5 550846 66,373 5 631194 97,297 4
80 170304 56,548 5 170320 67,650 5 550858 100,774 3
90 170305 59,981 5 170321 72,802 3 170336 106,760 3
100 170306 64,233 5 170322 75,735 3 170337 112,895 2 787845 157,001 2
110 170307 69,067 4 170323 80,886 4 170338 119,065 2 787846 165,629 2
120 170308 70,718 4 170324 82,454 3 170339 119,981 2 787847 166,602 2
130 170309 74,519 4 170325 86,773 3 170340 125,048 10 787848 173,544 2
140 170310 79,137 4 170326 91,723 3 170341 132,007 10 550980 193,864 2
150 170311 83,671 4 170327 96,640 3 170342 138,951 9 787849 202,637 2
160 170312 87,572 4 170328 106,193 3 170343 145,904 9 787850 211,472 2
180 170313 95,891 3 170329 123,147 2 170344 159,157 8 550981 229,078 2
200 170314 104,309 3 170330 133,484 2 170345 166,357 7 550982 237,402 2
220 170315 126,151 3 170331 160,041 2 170346 213,386 7 550983 301,764 2
240 170316 135,451 2 170332 171,568 9 170347 229,224 6 550984 321,872 2
260 170317 145,604 2 170333 183,080 8 170348 245,111 6 787851 341,980 2
280 170318 155,706 2 170334 194,616 8 170349 260,967 6 551123 362,088 2
300 170319 165,792 2 170335 233,624 7 170350 276,812 6 551143 382,196 2
Important * long delivery items-subject to extended deliveries ( 3 to 4 months ).

Users are advised to plan their requirements in advance.
42 Toll Free : 1800.102.3911 April 2019

THE WORLD LEADER
Gr. 8 Hex Head Bolts/Screws Inch (UNC)

DIA 1/4 5/16 3/8 1/2

1/2 170351 471 500 170364 628 500 170381 1,010 200
5/8 170352 584 500 170365 601 500 170382 1,010 200
3/4 170353 531 500 170366 579 200 170383 881 200 170400 1,897 100
7/8 170354 479 500 170367 633 200 170384 1,064 200 170401 1,883 100
1 170355 523 200 170368 630 200 170385 869 200 170402 1,999 100
1 1/4 170356 535 200 170369 693 200 170386 971 200 170403 2,230 100
1 1/2 170357 593 200 170370 844 200 170387 1,097 100 170404 2,380 50
1 3/4 170358 649 200 170371 946 200 170388 1,280 100 170405 2,559 25
2 170359 712 200 170372 1,007 200 170389 1,406 100 170406 2,785 25
2 1/4 170360 782 200 170373 1,108 100 170390 1,540 100 170407 3,075 25
2 1/2 170361 871 200 170374 1,216 100 170391 1,690 100 170408 3,274 25
2 3/4 170362 957 200 170375 1,314 100 170392 1,883 100 170409 3,545 25
3 170363 1,046 200 170376 1,383 100 170393 1,995 100 170410 3,976 25
3 1/4 240027 1,205 200 170377 1,476 100 170394 2,206 50 170411 4,264 25
3 1/2 240028 1,219 200 170378 1,590 100 170395 2,267 50 170412 4,411 25
3 3/4 240029 1,301 100 170379 1,963 100 170396 2,779 25 170413 4,641 25
4 240030 1,395 100 170380 2,169 100 170397 2,987 25 170414 4,835 25
4 1/4 551064 2,314 100 170398 3,322 25 170415 5,135 25
4 1/2 787956 1,554 100 551065 2,440 100 170399 3,516 25 170416 5,594 25
5 551063 1,718 100 551066 2,710 100 240034 3,906 50 170417 6,110 25
5 1/2 787957 2,961 100 240035 4,297 50 170418 7,459 25
6 787958 3,210 100 240036 4,687 50 170419 9,057 25
6 1/2 240037 11,126 25
7 170420 13,607 20
7 1/2 170421 14,583 25
8 170422 15,554 25
1. Speci cations : Generally conforming to ANSI B 18.2.1
2. Threads : Uni ed Coarse, 2A as per ANSI B1.1.
3. Material & Mechanical Properties : Grade 8 as per SAE J 429
4. Note : Non-shaded sizes if required in full thread will cost 10% extra.
: Upto 4 Inch Dia can be manufactured against request.
6. For Hex Bolt/Screws BSW, above prices will apply.
April 2019 Toll Free : 1800.102.3911 43

THE WORLD LEADER

DIA 5/8 3/4 7/8 1

1 170423 3,494 25
1 1/4 170424 3,900 25 551032 6,749 25
1 1/2 170425 4,091 25 170445 7,179 25 551044 15,561 10 170487 15,686 10
1 3/4 170426 4,364 25 170446 7,452 25 787988 17,093 10 170488 15,686 10
2 170427 4,585 25 170447 7,939 25 170467 18,773 10 170489 16,488 10
2 1/4 170428 4,992 25 170448 8,720 25 170468 18,773 10 170490 17,127 10
2 1/2 170429 5,462 25 170449 9,148 25 170469 15,136 10 170491 17,913 10
2 3/4 170430 5,903 25 170450 9,979 10 170470 15,136 10 170492 19,099 10
3 170431 6,363 25 170451 10,371 10 170471 15,858 10 170493 20,918 10
3 1/4 170432 6,776 25 170452 10,826 10 170472 17,488 10 170494 21,728 10
3 1/2 170433 7,177 25 170453 11,702 10 170473 17,488 10 170495 22,642 10
3 3/4 170434 7,938 25 170454 12,561 10 170474 18,762 10 170496 24,923 10
4 170435 8,148 25 170455 13,143 10 170475 19,657 10 170497 24,923 10
4 1/4 170436 8,432 25 170456 13,466 10 170476 20,839 10 170498 27,479 10
4 1/2 170437 8,747 25 170457 14,090 10 170477 21,831 10 170499 27,479 5
5 170438 9,846 25 170458 14,987 10 170478 23,491 10 170500 30,662 5
5 1/2 170439 11,327 20 170459 16,831 10 170479 24,747 10 170501 33,140 5
6 170440 11,874 10 170460 17,278 10 170480 26,267 10 170502 34,674 5
6 1/2 170441 13,853 10 170461 18,671 10 170481 27,720 5 170503 37,602 5
7 170442 14,920 10 170462 18,671 10 170482 30,598 5 170504 40,528 5
7 1/2 170443 15,985 10 170463 20,062 10 170483 32,181 5 170505 43,365 5
8 170444 16,276 10 170464 21,983 10 170484 33,600 5 170506 45,372 5
9 551069 18,310 10 170465 22,982 10 170485 38,178 5 170507 51,026 5
10 551070 20,347 10 170466 25,857 8 170486 39,946 5 170508 55,953 4
11 240038 27,482 8 170509 58,753 4
12 551222 29,979 8 170510 64,093 4
44 Toll Free : 1800.102.3911 April 2019

THE WORLD LEADER

DIA 1 1/8 1 1/4 1 3/8

1 170511 17,618 5
1 1/4 170512 19,108 5
1 1/2 170513 20,851 10
1 3/4 170514 21,557 10
2 170515 23,214 10
2 1/4 170516 24,880 5 551302 32,914 5
2 1/2 170517 26,301 5 170534 34,832 5 170551 42,176 5
2 3/4 170518 27,720 5 170535 36,486 5 170552 44,068 5
3 170519 29,376 5 551062 38,142 5 170553 46,203 5
3 1/4 170520 31,041 5 170537 40,278 5 170554 48,808 5
3 1/2 170521 32,459 5 170538 42,176 5 170555 51,180 5
3 3/4 170522 34,116 5 170539 44,304 5 170556 53,784 5
4 170523 35,772 5 170540 46,203 4 170557 56,155 5
4 1/4 170524 37,435 5 170541 48,094 5 170558 58,761 4
4 1/2 170525 39,093 5 170542 50,229 4 170559 61,131 4
5 170526 42,176 5 170543 54,256 5 170560 66,108 4
5 1/2 170527 45,489 5 170544 58,046 3 170561 71,083 3
6 170528 48,573 5 170545 62,080 4 170562 76,059 3
6 1/2 551072 66,780 3
7 170529 54,971 3 170546 69,897 3 170563 85,776 3
7 1/2 170530 58,046 5 170547 73,689 3 170564 90,752 3
8 170531 61,366 3 170548 77,714 3 170565 95,728 3
9 170532 85,776 4 170549 85,776 3 170566 105,678 2
10 170533 74,160 3 170550 93,591 3 170567 115,630 2
April 2019 Toll Free : 1800.102.3911 45

THE WORLD LEADER

DIA 1 1/2 1 3/4 2

2 1/2 170568 53,070 5 170585 85,709 3 170602 119,992 2
2 3/4 170569 55,677 5 170586 89,339 3 170603 124,921 2
3 170570 58,290 5 170587 92,979 3 170604 129,601 2
3 1/4 170571 60,652 4 170588 96,876 2 170605 134,530 2
3 1/2 170572 63,737 4 170589 100,505 2 170606 139,468 2
3 3/4 170573 66,579 4 170590 104,402 2 170607 144,406 2
4 170574 69,661 3 170591 108,824 2 170608 149,336 2
4 1/4 170575 72,504 3 170592 113,238 2 170609 154,275 2
4 1/2 170576 75,586 3 170593 117,650 2 170610 159,986 2
5 170577 81,504 3 170594 126,486 2 170611 171,679 2
5 1/2 170578 87,431 3 170595 135,313 2 170612 183,102 2
6 170579 93,357 2 170596 144,149 2 170613 194,793 2
7 170580 104,729 2 170597 161,284 2 170614 216,866 2
7 1/2 170581 110,653 3 170598 169,853 2 170615 228,559 2
8 170582 116,579 2 170599 178,945 2 170616 240,241 2
9 170583 128,423 2 170600 196,608 2 170617 263,098 2
10 170584 140,274 2 170601 214,269 2 170618 286,471 2
46 Toll Free : 1800.102.3911 April 2019

THE WORLD LEADER
Hex Nuts - ISO 4032 - Class 10

Size (mm) Grade Part No. ` Price/100 pcs Pcs. Per Box Pcs. Per Carton
M4 X 0.7 8 793230 91 1000 18000
M5 X 0.8 8 793201 113 700 12600
M6 X 1 8 550303 153 500 9000
M8 X 1.25 8 550304 209 200 2400
M10 X 1.5 8 550305 404 200 2400
M12 X 1.75 8 550306 631 200 1600
M16 X 2 8 550307 1,310 100 800
M6 X 1 10 170619 182 500 9000
M8 X 1.25 10 170620 239 200 2400
M10 X 1.5 10 170621 461 200 2400
(M12) X 1.5 10 170623 718 200 2400
M12 X 1.75 10 170622 718 200 2400
(M14) X 1.5 10 170625 1,206 100 800
M14 X 2 10 170626 1,206 100 800
M16 X 2 10 170627 1,580 100 800
(M18) X1.5 10 170629 2,372 100 600
M18 X 2.5 10 170630 2,372 100 600
(M20)X 1.5 10 170631 3,037 50 300
M20 X 2.5 10 170632 3,037 50 300
M22 X 2.5 10 170633 4,134 50 200
M24 X 3 10 170634 5,221 50 200
M27 X 3 10 170635 8,430 25 150
M30 X 3.5 10 170636 12,139 25 150
M33 X 3.5 10 170637 16,700 10 80
M36 X 4 10 170638 21,557 10 80
M39 X 4 10 170639 29,404 10 40
M42 X 4.5 10 170640 36,117 10 40
M45 X 4.5 10 170641 43,148 10 40
M48 X 5 10 170642 51,983 10 40
M52 X 5 10 170643 61,548 4 16
M56 X 5.5 10 170644 79,554 4 16
M60 X 5.5 10 550301 149,161 3 12
M64 X 6 10 170645 159,106 3 12
M72 X 6 10 550302 284,865 2 8
1. Speci cations : Nuts with Metric Threads IS 1364, ISO 4032

2. Threads : ISO Metric 6H as per IS 4218, ISO 261, ISO 965.
3. Material Mechanical Properties : Property Class as tabulated as per IS 1367, ISO 898, Part-II.
4. Note : Size in brackets are non-preferred standards.
6. Nuts as per DIN934 will be manufactured against speci c order with minimum order quantity of each size
April 2019 Toll Free : 1800.102.3911 47

THE WORLD LEADER
Hex Nuts
Size Grade Part No ` Price/100 pcs Pcs. Per Box Pcs. Per Carton
1/4 8 170646 167 500 9000
5/16 8 170647 231 500 9000
3/8 8 170648 333 200 2400
7/16 8 170658 760 200 1600
1/2 8 170649 760 200 1600
5/8 8 170650 1,580 200 1600
3/4 8 170651 2,785 50 400
7/8 8 170652 3,753 50 200
1 8 170653 5,898 50 200
1-1/8 8 170654 8,329 25 150
1-1/4 8 170655 11,815 25 100
1-3/8 8 170656 15,090 25 100
1-1/2 8 170657 20,523 10 40
1. Speci cations : For Nuts with UNC Threads : (ANSI B 18.2.2).

2. Threads : Uni ed Coarse, 2B As Per ANSI B1.1.
3. Material Mechanical Properties : Grade as tabulated as per SAE J 995.
Hexagon Weld Nut

` Price/ Pcs. Pcs. Per
Size (mm) Part No.
100 pcs Per Box Carton
M6 136004 140 500 9000
M8 136001 266 200 2400
M10 136002 490 200 2400
M12 136003 697 200 1600
1. Speci cations : Generally conforming to DIN 929. Grade 6

4. No head marking.
48 Toll Free : 1800.102.3911 April 2019

THE WORLD LEADER
Nylock Nut Nylock Nut

(Nylon Ring Insert) (Duly White Zinc Plated) (Nylon Ring Insert) (Duly White Zinc Plated)
DIN 985 Grade-8 ISO 7040 Grade-8

` Price/ Pcs. Pcs. Per ` Price/ Pcs. Per Pcs. Per
Size (mm) Part No. Size (mm) Part No.
100 pcs Per Box Carton 100 pcs Box Carton
M6 290001 124 500 9000 M6 630448 179 500 9000
M8 290002 246 200 2400 M8 630449 321 200 2400
535 M10 630450 709 200 2400
M10 290003 200 2400
M12 630451 1,015 200 2400
M12 290004 783 200 2400
M12X1.5 630452 1,077 200 2400
M12 X1.5 290005 841 200 2400
M14 630453 1,651 100 800
M14 290006 1,287 100 800
M16 630454 2,136 100 800
M16 560957 1,732 100 800
M16X1.5 630455 2,187 100 800
M16X1.5 630379 1,773 100 800 M20 630456 4,335 50 300
M20 630380 3,738 50 300 M20X1.5 630457 4,639 50 300
M20 X1.5 630381 3,999 50 300
DIN 985 Grade-10 ISO 7040 Grade-10

` Price/ Pcs. Pcs. Per ` Price/ Pcs. Pcs. Per
Size (mm) Part No. Size (mm) Part No.
100 Pcs. Per Box Carton 100 pcs Per Box Carton
M10 630305 633 200 2400 M10 630458 819 200 2400
M12 630306 935 200 2400 M12 630459 1,183 200 2400
M16 290007 1,994 100 800 M16 630460 2,446 100 800
M16 X 1.5 290008 2,061 100 800 M16 X1.5 630461 2,545 100 800
M20 290009 3,970 50 300 M20 630462 4,599 50 300
M24 290010 8,071 50 200 M24 630463 10,235 50 200
All Metal Prevailing Torque Nut Metal Insert Prevailing

DIN 980V / ISO7042 Torque Nut - DIN 980M
(Duly White Zinc Plated) (Duly White Zinc Plated)
Grade-10 Grade-10
Size Part No. Part No. ` Price/ Pcs. Pcs. Per ` Price/ Pcs. Pcs. Per
Size (mm) Part No.
(mm) DIN ISO 100 pcs Per Box Carton 100 pcs Per Box Carton
M6 796311 398 500 9000 M6 815003 1,126 500 9000
M8 796314 772 200 2400 M8 815004 1,251 200 2400
M10 816933 796315 1,343 200 2400 M10 815005 1,389 200 2400
M12 816934 796313 2,122 200 2400 M12 815006 2,024 200 2400
M16 796312 4,025 100 800 M14 815013 3,066 100 800
M20 796310 7,744 50 300 M16 814419 4,048 100 800
M24 787170 14,648 50 300 M20 814420 8,487 50 300
M22 815007 12,144 50 300
M24 814421 18,355 50 300
April 2019 Toll Free : 1800.102.3911 49

THE WORLD LEADER
Spring Washer - Square Section

Size ` Price/ Pcs. Pcs. Per Size ` Price/ Pcs. Pcs. Per
Part No. Part No.
(mm) 100 pcs Per Box Carton (mm) 100 pcs Per Box Carton
3MM 171758 14 2000 160000 18MM 171767 220 100 2400
4MM 171759 17 2000 90000 20MM 171768 407 100 1500
5MM 171760 20 2000 48000 22MM 171769 456 50 1000
6MM 171761 22 1000 30000 24MM 171770 606 50 1200
8MM 171762 38 1000 24000 27MM 171771 695 50 700
10MM 171763 67 500 12000 30MM 171772 1,075 50 500
12MM 171764 80 500 7000 33MM 171773 1,266 25 400
14MM 171765 133 200 4800 36MM 171774 1,841 25 350
16MM 171766 199 100 3000 39MM 171775 1,992 25 250
1. Speci cations : Generally conforming to IS 6735/1972 & DIN 7980
Spring Washer - Flat Section

Size ` Price/ Pcs. Pcs. Per Size ` Price/ Pcs. Pcs. Per
Part No. Part No.
(mm) 100 pcs Per Box Carton (mm) 100 pcs Per Box Carton
3MM 171776 14 2000 140000 18MM 171785 354 100 1800
4MM 171777 16 2000 120000 20MM 171786 506 100 1400
5MM 171778 21 2000 60000 22MM 171787 573 50 800
6MM 171779 37 1000 32000 24MM 171788 856 50 700
8MM 171780 60 1000 14000 27MM 171789 954 50 700
10MM 171781 87 500 7000 30MM 171790 1,541 50 500
12MM 171782 130 500 5000 33MM 171791 2,465 25 200
14MM 171783 201 200 3200 36MM 171792 2,581 25 350
16MM 171784 305 100 3000 39MM 171793 2,709 25 250
1. Speci cations : Generally conforming to DIN 127 B, IS 3063 & BS 4464
Hardened Washer for 10.9 Bolts

` Price/ Pcs. Pcs. Per
Size (mm) Part No.
100 pcs Per Box Carton
M12 551111 489 500 4000
M16 551112 855 200 1600
M20 551113 1,296 100 800
M22 631368 1,562 100 800
M24 551114 1,829 100 600
M27 630476 3,067 100 400
M30 630477 3,834 100 400
M36 796066 6,250 100 400
1. Speci cations : Generally conforming to 300HV minimum. For Unbrako Hardened Washer 10.9 Bolts
50 Toll Free : 1800.102.3911 April 2019

Stainless Steel
Page Contents
61 Socket Head Cap Screws 304
64 Socket Head Cap Screws 316
67 Socket Head Countersunk Screws
68 Hex Head Screws 304
74 Hex Head Screws 316
78 Hex Head Screws 304 - BSW
79 Hex Head Screws 316 - BSW
79 Hex Nuts 304 / 316 - BSW
80 Hex Nuts 304 / 316
80 Nylock Nut 982 / 985
81 Spring Washer 304 / 316
82 Plain Washer 304 / 316
82 Threaded Rod 304 / 316

60 Toll Free : 1800.102.3911 April 2019
THE WORLD LEADER
Socket Head Cap Screws Metric S.S. 304

M3 M4 M5 M6 M8
DIA Wrench Key Size 2.5mm Wrench Key Size 3mm Wrench Key Size 4mm Wrench Key Size 5mm Wrench Key Size 6mm
Length Part No. ` Price/ Box ` Price/ Box ` Price/ Box ` Price/ Box ` Price/ Box
100 Pcs Qty 100 Pcs Qty 100 Pcs Qty 100 Pcs Qty 100 Pcs Qty
6 5000730 281 500 5000738 404 500
8 5000731 296 500 5000739 398 500
10 5000732 165 500 5000740 215 500 5000749 264 500 5000762 425 200
12 5000733 176 500 5000741 225 500 5000750 288 500 5000763 434 200 5000780 1,113 200
16 5000734 191 500 5000742 243 500 5000751 330 500 5000764 473 200 5000781 916 200
20 5000735 215 500 5000743 278 500 5000752 369 200 5000765 527 200 5000782 1,008 200
25 5000736 239 200 5000744 317 500 5000753 425 200 5000766 602 200 5000783 1,105 200
30 5000737 416 200 5000745 398 500 5000754 500 200 5000767 652 200 5000784 1,260 200
35 5000746 469 200 5000755 589 200 5000768 772 200 5000785 1,370 200
40 5000747 649 200 5000756 686 200 5000769 847 200 5000786 1,508 200
45 5002525 706 200 5000757 760 200 5000770 922 200 5000787 1708 200
50 5000748 763 200 5000758 814 200 5000771 993 200 5000788 1,813 200
55 5000759 1,048 200 5000772 1,185 200 5000789 1,985 100
60 5000760 1,098 200 5000773 1,251 200 5000790 2,077 100
65 5000761 1,194 200 5000774 1,386 200 5000791 2,284 100
70 5000775 1,472 200 5000792 2,361 100
75 5000776 1,640 200 5000793 2,541 100
80 5000777 1,733 200 5000794 2,765 100
90 5000778 1,993 200 5000795 3,220 100
100 5000779 2,229 200 5000796 3,513 100
110 5000797 4,115 100
120 5000798 4,429 50
125 5000799 4,599 50
130 5000800 4,848 50
140 5001471 5,282 50
150 5001472 5,641 50
1. Speci cation : DIN 912, ISO 4762.

2. Property Class : A2 - 70.
3. Material : AISI 304.
4. GST extra as applicable.
5. All Cold Forged & fully threaded up to head.
6. Marking : UNBRAKO A2 - 70.
April 2019 Toll Free : 1800.102.3911 61

THE WORLD LEADER

M10 M12 M16 M20
DIA
100 Pcs Qty 100 Pcs Qty 100 Pcs Qty 100 Pcs Qty
16 5000801 1,682 200
20 5000802 1,799 200 5000821 2,658 100
25 5000803 1,964 100 5000822 2,861 100
30 5000804 2,130 100 5000823 3,067 100 5000842 6,102 50
35 5000805 2,337 100 5000824 3,348 100 5000843 6,509 50
40 5000806 2,499 100 5000825 3,609 100 5000844 6,981 50 5000859 12,096 10
45 5000807 2,726 100 5000826 3,858 50 5000845 7,392 50 5000860 13,101 10
50 5000808 2,981 100 5000827 4,199 50 5000846 8,070 25 5000861 13,801 10
55 5000809 3,211 100 5000828 4,471 50 5000847 8,612 25 5000862 14,456 10
60 5000810 3,196 100 5000829 4,869 50 5000848 9,211 25 5000863 15,318 10
65 5000811 3,376 100 5000830 5,097 50 5000849 9,717 20 5000864 16,226 10
70 5000812 3,893 50 5000831 5,330 50 5000850 10,049 20 5000865 17,234 10
75 5000813 4,267 50 5000832 5,700 50 5000851 10,794 20 5000866 18,335 10
80 5000814 4,393 50 5000833 5,943 50 5000852 11,336 20 5000867 19,077 10
90 5000815 4,854 50 5000834 6,587 50 5000853 12,544 10 5000868 21,004 10
100 5000816 5,237 50 5000835 7,236 50 5000854 13,816 10 5000869 22,803 10
110 5000817 6,215 50 5000836 8,250 25 5000855 15,292 20 5000870 26,130 10
120 5000818 6,967 50 5000837 9,052 25 5000856 16,713 20 5001486 28,199 10
125 5000819 7,146 50 5000838 9,564 25 5000857 17,384 20 5001487 29,234 10
130 5000820 7,496 50 5000839 10,223 25 5001480 17,907 20 5001488 30,266 10
140 5001473 8,122 50 5000840 10,893 25 5001481 19,146 20 5001489 32,334 10
150 5001474 8,696 50 5000841 11,904 25 5000858 20,301 20 5001490 34,402 10
160 5001475 10,794 50 5001476 13,029 25 5001482 22,405 10 5001491 41,545 10
170 5001718 11,536 25 5001477 19,272 20 5001483 25,960 10 5001492 43,901 10
180 5001719 12,230 25 5001478 19,781 20 5001484 28,196 10 5001493 46,258 10
200 5001720 13,553 25 5001479 24,165 20 5001485 31,670 10 5001730 50,968 10
220 5001721 14,963 20 5001724 26,424 20 5001727 35,611 10 5001731 62,283 10
230 5001722 15,632 20 5001725 27,641 20 5001728 37,526 10 5001732 65,111 5
250 5001723 16,970 20 5001726 30,143 20 5001729 40,944 10 5001733 70,761 5

62 Toll Free : 1800.102.3911 April 2019

THE WORLD LEADER

M22 M24 M27 M30
DIA
Length Part No. ` Price/ Box ` Price/ Box ` Price/ Box ` Price/ Box
50 5000871 22,327 10 5000891 27,785 10 5000910 37,143 5
55 5000872 23,489 10 5000892 29,267 10 5000911 39,462 5
60 5000873 24,649 10 5000893 30,566 10 5000912 41,785 5 5000929 61,304 5
65 5000874 25,990 10 5000894 31,954 10 5000913 44,106 5 5000930 64,153 5
70 5000875 27,327 10 5000895 33,621 10 5000914 46,426 5 5000931 67,003 5
75 5000876 29,276 10 5000896 36,018, 10 5000915 49,742 5 5000932 71,781 5
80 5000877 30,009 10 5000897 36,955 10 5000916 51,070 5 5000933 72,805 5
90 5000879 32,688 10 5000898 40,289 10 5000917 55,819 5 5000934 78,610 5
100 5000880 35,368 10 5000899 43,624 10 5000918 60,565 5 5000935 84,413 5
110 5000881 38,047 10 5000900 46,958 10 5000919 65,314 5 5000936 90,215 5
120 5000882 40,725 5 5000901 50,292 10 5000920 70,063 5 5000937 96,017 5
125 5000883 42,424 5 5000902 52,383 5 5000921 72,975 5 5000938 100,019 5
130 5000884 43,406 5 5000903 53,626 5 5000922 74,809 5 5000939 101,823 5
140 5000885 46,085 5 5000904 56,959 5 5000923 79,559 5 5000940 107,625 5
150 5000886 48,763 5 5000905 60,296 5 5000924 84,308 5 5000941 113,958 5
160 5000887 58,605 5 5000906 72,490 5 5000925 103,896 5 5000942 139,103 4
170 5000888 62,268 5 5000907 77,015 5 5000926 110,384 5 5000943 147,734 4
180 5000889 64,709 5 5000908 80,086 5 5000927 114,,975 5 5000944 152645 4
200 5000890 70,814 5 5000909 87,683 5 5000928 125,562 5 5000945 166,186 5
220 5001734 85,466 5 5001737 105,865 5 5001743 136,641 4 5001749 179,,726 3
230 5001735 89,311 5 5001738 110,674 5 5001744 142,796 4 5001750 187,851 3
250 5001736 97,112 5 5001739 118,997 5 5001745 157,693 4 5001751 201,269 3
270 5001740 128,495 5 5001746 171,234 3 5001752 214,688 2
280 5001741 133,301 5 5001747 177,635 3 5001753 220,350 2
300 5001742 142,912 5 5001748 190,314 3 5001754 233,891 2

April 2019 Toll Free : 1800.102.3911 63

THE WORLD LEADER

M3 M4 M5 M6 M8
DIA
Wrench Key Size 2.5mm Wrench Key Size 3mm Wrench Key Size 4mm Wrench Key Size 5mm Wrench Key Size 6mm
Length Part No. ` Price/ Box Part No.

` Price/ Box
Part No.
` Price/ Box
Part No.
` Price/ Box
Part No.
` Price/ Box
100 Pcs Qty 100 Pcs Qty 100 Pcs Qty 100 Pcs Qty 100 Pcs Qty
6 5000946 382 500 5000953 549 500
8 5000947 403 500 5000954 541 500
10 5000948 224 500 5000955 292 500 5000963 359 500 5000974 578 200
12 5000949 239 500 5000956 306 500 5000964 392 500 5000975 590 200 5000992 1,514 200
16 5000950 260 500 5000957 330 500 5000965 449 500 5000976 643 200 5000993 1,246 200
20 5000951 292 500 5000958 378 500 5000966 502 200 5000977 717 200 5000994 1,371 200
25 5000952 325 200 5000959 431 500 5000967 578 200 5000978 819 200 5000995 1,503 200
30 5001494 566 200 5000960 541 500 5000968 680 200 5000979 ,887 200 5000996 1,714 200
35 5000961 638 200 5000969 801 200 5000980 1,050 200 5000997 1,863 200
40 5000962 883 200 5000970 933 200 5000981 1,152 200 5000998 2,051 200
45 5002526 980 200 5000971 1,034 200 5000982 1,254 200 5000999 2,323 200
50 5001495 1,038 200 5000972 1,107 200 5000983 1,350 200 5001000 2,466 200
55 5000973 1,425 200 5000984 1,612 200 5001001 2,700 100
60 5001496 1,493 200 5000985 1,701 200 5001002 2,825 100
65 5001497 1,624 200 5000986 1,885 200 5001003 3,106 100
70 5000987 2,002 200 5001004 3,211 100
75 5000988 2,230 200 5001005 3,456 100
80 5000989 2,357 200 5001006 3,760 100
90 5000990 2,710 200 5001007 4,379 100
100 5000991 3,031 200 5001008 4,778 100
110 5001498 5,596 100
120 5001499 6,023 50
125 5001500 6,255 50
130 5001501 6,593 50
140 5001502 7,184 50
150 5001503 7,672 50

64 Toll Free : 1800.102.3911 April 2019

THE WORLD LEADER

M10 M12 M16 M20
DIA
16 5001504 2,288 200
20 5001009 2,447 200 5001512 3,615 100
25 5001010 2,671 100 5001024 3,891 100
30 5001011 2,897 100 5001025 4,171 100 5001523 8,299 50
35 5001012 3,178 100 5001026 4,553 100 5001038 8,852 50
40 5001013 3,399 100 5001027 4,908 100 5001039 9,494 50 5001050 16,451 10
45 5001014 3,707 100 5001028 5,247 50 5001040 10,053 50 5001051 17,817 10
50 5001015 4,054 100 5001029 5,711 50 5001041 10,975 25 5001052 18,769 10
55 5001016 4,367 100 5001030 6,081 50 5001042 11,712 25 5001053 19,660 10
60 5001017 4,347 100 5001031 6,622 50 5001043 12,527 25 5001054 20,832 10
65 5001018 4,591 100 5001032 6,932 50 5001044 13,215 20 5001055 22,067 10
70 5001019 5,294 50 5001033 7,249 50 5001045 13,667 20 5001056 23,438 10
75 5001020 5,803 50 5001034 7,752 50 5001046 14,680 20 5001057 24,936 10
80 5001021 5,974 50 5001035 8,082 50 5001047 15,417 20 5001058 25,945 10
90 5001022 6,601 50 5001036 8,958 50 5001048 17,060 10 5001059 28,565 10
100 5001023 7,122 50 5001037 9,841 50 5001049 18,790 10 5001060 31,012 10
110 5001505 8,452 50 5001513 11,220 25 5001524 20,797 20 5001534 35,537 10
120 5001506 9,475 50 5001514 12,311 25 5001525 22,730 20 5001535 38,351 10
125 5001507 9,719 50 5001515 13,007 25 5001526 23,642 20 5001536 39,758 10
130 5001508 10,195 50 5001516 13,903 25 5001528 24,354 20 5001537 41,162 10
140 5001509 11,046 50 5001517 14,814 25 5001529 26,039 20 5001538 43,974 10
150 5001510 11,827 50 5001518 16,189 25 5001527 27,609 20 5001539 46,787 10
160 5001511 14,680 50 5001519 17,719 25 5001530 30,471 10 5001540 56,501 10
170 5001755 15,689 25 5001520 26,210 20 5001531 35,306 10 5001541 59,705 10
180 5001756 16,633 25 5001521 26,902 20 5001532 38,347 10 5001542 62,911 10
200 5001757 18,432 25 5001522 32,864 20 5001533 43,071 10 5001767 69,316 10
220 5001758 20,350 20 5001761 35,937 20 5001764 48,431 10 5001768 84,705 10
230 5001759 21,260 20 5001762 37,592 20 5001765 51,035 10 5001769 88,551 5
250 5001760 23,079 20 5001763 40,994 20 5001766 55,684 10 5001770 96,235 5

April 2019 Toll Free : 1800.102.3911 65

THE WORLD LEADER

M22 M24 M27 M30
DIA
50 5001061 30,365 10 5001080 37,788 10 5001099 50,514 5
55 5001062 31,945 10 5001081 39,803 10 5001100 53,668 5
60 5001063 33,523 10 5001082 41,570 10 5001101 56,828 5 5001118 83,373 5
65 5001064 35,346 10 5001083 43,457 10 5001102 59,984 5 5001119 87,248 5
70 5001065 37,165 10 5001084 45,725 10 5001103 63,139 5 5001120 91,124 5
75 5001066 39,815 10 5001085 48,984 10 5001104 67,649 5 5001121 97,622 5
80 5001067 40,812 10 5001086 50,259 10 5001105 69,455 5 5001122 99,015 5
90 5001068 44,456 10 5001087 54,793 10 5001106 75,914 5 5001123 106,910 5
100 5001069 48,100 10 5001088 59,329 10 5001107 82,368 5 5001124 114,802 5
110 5001070 51,744 10 5001089 63,863 10 5001108 88,827 5 5001125 122,692 5
120 5001071 55,386 5 5001090 68,397 10 5001109 95,286 5 5001126 130,583 5
125 5001072 57,697 5 5001091 71,241 5 5001110 99,246 5 5001127 136,026 5
130 5001073 59,032 5 5001092 72,931 5 5001111 101,740 5 5001128 138,479 5
140 5001074 62,676 5 5001093 77,464 5 5001112 108,200 5 5001129 146,370 5
150 5001075 66,318 5 5001094 82,003 5 5001113 114,659 5 5001130 154,983 5
160 5001076 79,703 5 5001095 98,586 5 5001114 141,299 5 5001131 189,180 4
170 5001077 84,684 5 5001096 104,740 5 5001115 150,122 5 5001132 200,918 4
180 5001078 88,004 5 5001097 108,917 5 5001116 156,366 5 5001133 207,597 4
200 5001079 96,307 5 5001098 119,249 5 5001117 170,764 5 5001134 226,013 5
220 5001771 116,234 5 5001774 143,976 5 5001780 185,832 5 5001786 244,427 3
230 5001772 121,463 5 5001775 150,517 5 5001781 194,203 4 5001787 255,477 3
250 5001773 132,072 5 5001776 161,836 5 5001782 214,462 4 5001788 273,726 3
270 5001777 174,753 5 5001783 232,878 3 5001789 291,976 2
280 5001778 181,289 5 5001784 241,584 3 5001790 299,676 2
300 5001779 194,360 5 5001785 258,827 3 5001791 318,092 2

66 Toll Free : 1800.102.3911 April 2019

THE WORLD LEADER
Socket Countersunk Head Cap Screws (CSK) - A2-70 Metric

M3* M4* M5 M6 M8
DIA
Wrench Key Size 2mm Wrench Key Size 2.5mm Wrench Key Size 3mm Wrench Key Size 4mm Wrench Key Size 5mm
8 5001248 102 5001253 147 5001262 194
10 5001249 109 5001254 155 5001263 215 5001272 280
12 5001250 123 5001255 167 5001264 230 5001273 296
14 5010286 242 5010289 316
16 5001251 146 5001256 199 5001265 253 5001274 335 5001286 846
18 5010285 207 5010287 272 5010290 363 5010293 862
20 5001252 203 5001257 215 5001266 292 5001275 390 5001287 878
25 5010284 271 5001258 274 5001267 349 5001276 455 5001288 971
30 5001259 309 5001268 412 5001277 533 5001289 1,082
35 5001260 339 5001269 466 5001278 606 5001290 1,182
40 5001261 392 5001270 519 5001279 726 5001291 1,288
45 5010288 589 5010291 731 5010294 1,437
50 5001271 660 5001280 737 5001292 1,587
55 5010292 877 5010295 1,758
60 5001293 1,931
M10 M12 M16

DIA
100 Pcs 100 Pcs 100 Pcs
20 5001298 1,589
25 5001299 1,774 5001309 3,651
30 5001300 1,938 5001310 4,107 5010304 5,802
35 5001301 2,068 5001311 4,517 5010305 6,541
40 5001302 2,311 5001312 4,641 5010306 6,250
45 5010296 2,505 5010300 4,987 5010307 6,892
50 5001303 2,699 5001313 5,335 5010308 7,526
55 5010297 2,859 5010301 5,611 5010309 8,178
60 5001304 3,020 5001314 5,889 5010310 8,803
65 5010298 3,229 5010302 6,207 5010311 9,465
70 5001305 3,440 5001315 6,525 5010312 10,656
75 5010299 3,600 5010303 6,779 5010313 11,423
80 5001306 3,759 5001316 7,034 5010314 12,191
90 5001307 4,245 5010315 13,728
Quantity per box 25
100 5010316 15,263
Qty. Per Box 100 50 50 Quantity per box 200
1. Specification : DIN 7991 / ISO 10642

Important * Long delivery items-subject to extended deliveries (3 to 4 months).
Users are advised to plan their requirements in advance.
April 2019 Toll Free : 1800.102.3911 67

THE WORLD LEADER
Hex Head Screws Metric S.S. 304

DIA M3 M4 M5 M6
10 5000001 136 500 5000011 166 500 5000021 225 500 5000037 299 500
12 5000002 150 500 5000012 171 500 5000022 238 500 5000038 306 500
16 5000003 156 500 5000013 186 500 5000023 254 500 5000039 340 500
20 5000004 172 500 5000014 204 500 5000024 283 500 5000040 380 500
25 5000005 198 200 5000015 228 500 5000025 319 500 5000041 427 500
30 5000006 320 200 5000016 274 500 5000026 365 500 5000042 477 500
35 5000007 387 200 5000017 320 500 5000027 427 500 5000043 527 200
40 5000008 480 200 5000018 450 500 5000028 512 500 5000044 574 200
45 5000009 547 200 5000019 483 500 5000029 563 500 5000045 620 200
50 5000010 558 200 5000020 501 500 5000030 599 500 5000046 668 200
55 5000031 774 500 5000047 794 200
60 5000032 796 200 5000048 829 200
65 5000033 855 200 5000049 908 100
70 5000034 911 200 5000050 949 100
75 5000035 983 200 5000051 1,059 100
80 5000036 1,040 200 5000052 1,096 100
85 5000053 1,233 100
90 5000054 1,257 100
100 5000055 1,404 100
1. Speci cation : DIN 933.

7. Screws as per IS 1364 / ISO 4017 will be manufactured against speci c order with minimum order quantity each size.
68 Toll Free : 1800.102.3911 April 2019

THE WORLD LEADER

DIA M8 M10 M12
Length ` Price/ Box Part No. Part No. ` Price/ Box Part No. Part No. ` Price/ Box
Part No.
100 Pcs Qty ISO DIN 100 Pcs Qty ISO DIN 100 Pcs Qty
16 5000056 692 200 5000073 5000280 1,323 200
20 5000057 761 200 5000074 5000281 1,385 200 5000090 5000297 2,099 100
25 5000058 839 200 5000075 5000282 1,528 200 5000091 5000298 2,258 100
30 5000059 953 200 5000076 5000283 1,653 100 5000092 5000299 2,415 100
35 5000060 1,027 200 5000077 5000284 1,789 100 5000093 5000300 2,658 100
40 5000061 1,113 200 5000078 5000285 1,936 100 5000094 5000301 2,869 100
45 5000062 1,239 200 5000079 5000286 2,098 100 5000095 5000302 3,060 50
50 5000063 1,310 200 5000080 5000287 2,261 100 5000096 5000303 3,296 50
55 5000064 1,426 100 5000081 5000288 2,413 100 5000097 5000304 3,470 50
60 5000065 1,488 100 5000082 5000289 2,562 100 5000098 5000305 3,678 50
65 5000066 1,622 100 5000083 5000290 2,757 50 5000099 5000306 3,872 50
70 5000067 1,670 100 5000084 5000291 2,838 50 5000100 5000307 4,067 50
75 5000068 1,749 100 5000085 5000292 3,051 50 5000101 5000308 4,287 50
80 5000069 1,906 100 5000086 5000293 3,146 50 5000102 5000309 4,474 50
85 5000070 2,024 100 5000087 5000294 3,386 50 5000103 5000310 4,716 25
90 5000071 2,176 100 5000088 5000295 3,455 50 5000104 5000311 4,893 25
100 5000072 2,371 50 5000089 5000296 3,704 50 5000105 5000312 5,330 25
110 5000198 2,660 50 5000204 5000338 4,233 50 5000211 5000345 5,932 25
120 5000199 2,859 50 5000205 5000339 4,676 25 5000212 5000346 6,443 25
125 5000200 2,966 50 5000206 5000340 4,886 50 5000213 5000347 6,784 25
130 5000201 3,120 50 5000207 5000341 5,010 50 5000214 5000348 7,163 25
140 5000202 3,396 50 5000208 5000342 5,322 50 5000215 5000349 7,544 25
150 5000203 3,601 50 5000209 5000343 5,927 30 5000216 5000350 8,153 25
160 5000210 5000344 7,219 25 5000217 5000351 8,717 20
170 5001543 5001606 8,551 25 5000218 5000352 11,763 20
180 5001544 5001607 9,020 25 5000219 5000353 14,808 20
200 5001545 5001608 9,902 25 5000220 5000354 17,753 25
220 5001546 5001609 10,772 20 5001549 5001612 21,054 25
230 5001547 5001610 11,222 20 5001550 5001613 21,858 20
250 5001548 5001611 12,116 20 5001551 5001614 23,523 20

April 2019 Toll Free : 1800.102.3911 69

THE WORLD LEADER

DIA M14 M16 M18
Length Part No. Part No. ` Price/ Box Part No. ` Price/ Box ` Price/ Box
Part No.
ISO DIN 100 Pcs Qty 100 Pcs Qty 100 Pcs Qty
25 5000106 5000313 3,942 50 5000121 4,822 25
30 5000107 5000314 4,169 50 5000122 4,917 25
35 5000108 5000315 4,479 25 5000123 5,296 25
40 5000109 5000316 4,727 25 5000124 5,679 25 5000136 9,581 25
45 5000110 5000317 5,069 25 5000125 6,040 25 5000137 10,313 25
50 5000111 5000318 5,355 25 5000126 6,442 25 5000138 10,715 25
55 5000112 5000319 5,743 25 5000127 6,831 25 5000139 11,602 25
60 5000113 5000320 5,928 25 5000128 7,259 25 5000140 12,054 25
65 5000114 5000321 6,376 25 5000129 7,543 25 5000141 12,802 25
70 5000115 5000322 6,611 25 5000130 7,752 25 5000142 13,259 25
75 5000116 5000323 6,925 25 5000131 8,197 25 5000143 14,010 10
80 5000117 5000324 7,260 25 5000132 8,690 25 5000144 14,559 10
85 5000118 5000325 7,900 25 5000133 9,087 25 5000145 15,154 10
90 5000119 5000326 8,298 25 5000134 9,439 25 5000146 15,633 10
100 5000120 5000327 8,545 25 5000135 10,330 15 5000147 16,501 10
110 5001552 5001615 10,880 25 5000221 11,287 15 5001568 22,092 10
120 5001553 5001616 11,677 25 5000222 12,219 15 5001569 23,598 10
125 5001554 5001617 12,073 25 5000223 12,629 15 5001570 24,443 10
130 5001555 5001618 12,471 25 5000224 13,002 15 5001571 25,194 10
140 5001556 5001619 13,265 25 5000225 13,848 15 5001572 26,698 10
150 5001557 5001620 14,058 25 5000226 14,894 15 5001573 28,203 10
160 5001558 5001621 14,851 25 5000227 16,028 15 5001574 29,707 10
170 5001559 5001622 15,648 25 5000228 18,333 15 5001575 31,212 10
180 5001560 5001623 16,442 25 5000229 20,156 15 5001576 32,716 10
200 5001561 5001624 18,029 25 5000230 22,005 10 5001577 35,723 10
220 5001562 5001625 19,619 20 5001565 28,401 10 5001578 39,389 10
230 5001563 5001626 20,414 20 5001566 29,813 10 5001579 40,990 10
250 5001564 5001627 22,001 20 5001567 32,291 10 5001580 44,092 10

70 Toll Free : 1800.102.3911 April 2019

THE WORLD LEADER

DIA M20 M22 M24
Length ` Price/ Box Part No. Part No. ` Price/ Box ` Price/ Box
Part No. Part No.
100 Pcs Qty ISO DIN 100 Pcs Qty 100 Pcs Qty
40 5000148 9,992 25
45 5000149 10,742 25
50 5000150 11,286 25 5000160 5000328 18,602 10 5000170 21,923 10
55 5000151 11,726 25 5000161 5000329 19,868 10 5000171 23,354 10
60 5000152 12,352 25 5000162 5000330 21,341 10 5000172 25,039 10
65 5000153 13,077 10 5000163 5000331 21,916 10 5000173 27,524 10
70 5000154 13,828 10 5000164 5000332 23,123 10 5000174 28,643 10
75 5000155 14,356 10 5000165 5000333 24,440 10 5000175 30,412 10
80 5000156 15,038 10 5000166 5000334 25,303 10 5000176 31,076 10
85 5000157 15,624 10 5000167 5000335 26,883 10 5000177 32,312 10
90 5000158 16,258 10 5000168 5000336 27,479 10 5000178 32,944 10
100 5000159 17,435 10 5000169 5000337 28,369 10 5000179 35,923 10
110 5000231 19,886 10 5000240 5000355 30,978 10 5000250 39,666 5
120 5000232 21,133 10 5000241 5000356 33,722 10 5000251 41,794 10
125 5000233 21,780 10 5000242 5000357 34,166 10 5000252 43,434 5
130 5000234 22,547 10 5000243 5000358 35,213 10 5000253 43,667 5
140 5000235 23,893 10 5000244 5000359 37,343 10 5000254 46,789 5
150 5000236 25,310 10 5000245 5000360 40,193 10 5000255 52,820 5
160 5000237 26,460 10 5000246 5000361 43,176 5 5000256 53,978 5
170 5000238 28,805 10 5000247 5000362 46,236 5 5000257 56,316 5
180 5000239 32,130 10 5000248 5000363 48,023 5 5000258 59,442 5
200 5001581 39,829 10 5000249 5000364 52,946 5 5000259 64,655 5
220 5001582 44,196 5 5001585 5001628 55,607 5 5001588 70,181 5
230 5001583 46,194 5 5001586 5001629 57,708 5 5001589 72,928 5
250 5001584 49,486 5 5001587 5001630 62,070 5 5001590 79,373 5
270 5001591 84,341 4
280 5001592 93,357 4
300 5001593 97,526 4

April 2019 Toll Free : 1800.102.3911 71

THE WORLD LEADER

DIA M27 M30
Length Part No. ` Price/100 Pcs Box Qty Part No. ` Price/100 Pcs Box Qty
50 5000180 33,909 5
55 5000181 35,672 5
60 5000182 37,112 5 5000190 49,124 5
65 5000183 39,363 5 5000191 51,850 5
70 5000184 41,135 5 5000192 53,848 5
75 5000185 42,906 5 5000193 55,845 5
80 5000186 44,864 5 5000194 57,845 5
85 5000187 46,842 5 5000195 59,841 5
90 5000188 48,425 5 5000196 62,199 5
100 5000189 51,889 5 5000197 67,037 5
110 5000260 55,994 5 5000270 71,740 5
120 5000261 59,585 5 5000271 76,161 5
125 5000262 61,140 5 5000272 78,557 5
130 5000263 63,059 5 5000273 80,581 5
140 5000264 65,655 5 5000274 85,001 5
150 5000265 68,494 5 5000275 89,425 3
160 5000266 71,987 5 5000276 93,845 3
170 5000267 75,478 5 5000277 98,266 3
180 5000268 78,971 5 5000278 102,686 3
200 5000269 85,954 5 5000279 111,526 5
220 5001594 92,519 4 5001600 120,796 3
230 5001595 96,502 4 5001601 125,406 3
250 5001596 103,443 4 5001602 134,627 3
270 5001597 110,290 3 5001603 143,849 3
280 5001598 113,807 3 5001604 148,457 2
300 5001599 120,653 3 5001605 157,678 2

72 Toll Free : 1800.102.3911 April 2019

THE WORLD LEADER

DIA M3 M4 M5
Length Part No. ` Price/100 Pcs Box Qty Part No. ` Price/100 Pcs Box Qty Part No. ` Price/100 Pcs Box Qty
10 5000365 185 500 5000375 226 500 5000385 306 500
12 5000366 204 500 5000376 233 500 5000386 324 500
16 5000367 212 500 5000377 253 500 5000387 345 500
20 5000368 234 500 5000378 277 500 5000388 385 500
25 5000369 269 200 5000379 310 500 5000389 434 500
30 5000370 435 200 5000380 373 500 5000390 496 500
35 5000371 526 200 5000381 435 500 5000391 581 500
40 5000372 653 200 5000382 612 500 5000392 696 500
45 5000373 744 200 5000383 657 500 5000393 766 500
50 5000374 759 200 5000384 681 500 5000394 815 500
55 5000395 1,053 500
60 5000396 1,083 200
65 5000397 1,163 200
70 5000398 1,239 200
75 5000399 1,337 200
80 5000400 1,414 200

April 2019 Toll Free : 1800.102.3911 73

THE WORLD LEADER

DIA M6 M8 M10
Length ` Price/ Box ` Price/ Box Part No. Part No. ` Price/ Box
Part No. Part No.
100 Pcs Qty 100 Pcs Qty ISO DIN 100 Pcs Qty
10 5000401 407 500
12 5000402 416 500
16 5000403 462 500 5000420 941 200 5000443 5000645 1799 200
20 5000404 517 500 5000421 1,035 200 5000444 5000646 1,884 200
25 5000405 581 500 5000422 1,141 200 5000445 5000647 2,078 200
30 5000406 649 500 5000423 1,296 200 5000446 5000648 2,248 100
35 5000407 717 200 5000424 1,397 200 5000447 5000649 2,433 100
40 5000408 781 200 5000425 1,514 200 5000448 5000650 2,633 100
45 5000409 843 200 5000426 1,685 200 5000449 5000651 2,853 100
50 5000410 908 200 5000427 1,782 200 5000450 5000652 3,075 100
55 5000411 1,080 200 5000428 1,939 100 5000451 5000653 3,282 100
60 5000412 1,127 200 5000429 2,024 100 5000452 5000654 3,484 100
65 5000413 1,235 100 5000430 2,206 100 5000453 5000655 3,750 50
70 5000414 1,291 100 5000431 2,271 100 5000454 5000656 3,860 50
75 5000415 1,440 100 5000432 2,379 100 5000455 5000657 4,149 50
80 5000416 1,491 100 5000433 2,592 100 5000456 5000658 4,279 50
85 5000417 1,677 100 5000434 2,753 100 5000457 5000659 4,605 50
90 5000418 1,710 100 5000435 2,959 100 5000458 5000660 4,699 50
100 5000419 1,909 100 5000436 3,225 50 5000459 5000661 5,037 50
110 5000437 3,618 50 5000460 5000662 5,757 50
120 5000438 3,888 50 5000461 5000663 6,359 25
125 5000439 4,034 50 5000462 5000664 6,645 50
130 5000440 4,243 50 5000463 5000665 6,814 50
140 5000441 4,619 50 5000464 5000666 7,238 50
150 5000442 4,897 50 5000465 5000667 8,061 30
160 5000466 5000668 9,818 25
170 5001631 5001693 11,629 25
180 5001632 5001694 12,267 25
200 5001633 5001695 13,467 25
220 5001634 5001696 14,650 20
230 5001635 5001697 15,262 20
250 5001636 5001698 16,478 20

74 Toll Free : 1800.102.3911 April 2019

THE WORLD LEADER

DIA M12 M14 M16
Length Part No. Part No. ` Price/ Box Part No. Part No. ` Price/ Box ` Price/ Box
Part No.
ISO DIN 100 Pcs Qty ISO DIN 100 Pcs Qty 100 Pcs Qty
20 5000467 5000669 2,855 100
25 5000468 5000670 3,071 100 5000493 5000695 5,361 50 5000508 6,558 25
30 5000469 5000671 3,284 100 5000494 5000696 5,670 50 5000509 6,687 25
35 5000470 5000672 3,615 100 5000495 5000697 6,091 25 5000510 7,203 25
40 5000471 5000673 3,902 100 5000496 5000698 6,429 25 5000511 7,723 25
45 5000472 5000674 4,162 50 5000497 5000699 6,894 25 5000512 8,214 25
50 5000473 5000675 4,483 50 5000498 5000700 7,283 25 5000513 8,761 25
55 5000474 5000676 4,719 50 5000499 5000701 7,810 25 5000514 9,290 25
60 5000475 5000677 5,002 50 5000500 5000702 8,062 25 5000515 9,872 25
65 5000476 5000678 5,266 50 5000501 5000703 8,671 25 5000516 10,258 25
70 5000477 5000679 5,531 50 5000502 5000704 8,991 25 5000517 10,543 25
75 5000478 5000680 5,830 50 5000503 5000705 9,418 25 5000518 11,148 25
80 5000479 5000681 6,085 50 5000504 5000706 9,874 25 5000519 11,818 25
85 5000480 5000682 6,414 25 5000505 5000707 10,744 25 5000520 12,358 25
90 5000481 5000683 6,654 25 5000506 5000708 11,285 25 5000521 12,837 25
100 5000482 5000684 7,249 25 5000507 5000709 11,621 25 5000522 14,049 15
110 5000483 5000685 8,068 25 5001640 5001702 14,797 25 5000523 15,350 15
120 5000484 5000686 8,762 25 5001641 5001703 15,881 25 5000524 16,618 15
125 5000485 5000687 9,226 25 5001642 5001704 16,419 25 5000525 17,175 15
130 5000486 5000688 9,742 25 5001643 5001705 16,961 25 5000526 17,683 15
140 5000487 5000689 10,260 25 5001644 5001706 18,040 25 5000527 18,833 15
150 5000488 5000690 11,088 25 5001645 5001707 19,119 25 5000528 20,256 15
160 5000489 5000691 11,855 20 5001646 5001708 20,197 25 5000529 21,798 15
170 5000490 5000692 15,998 20 5001647 5001709 21,281 25 5000530 24,933 15
180 5000491 5000693 20,138 20 5001648 5001710 22,361 25 5000531 27,412 15
200 5000492 5000694 24,144 25 5001649 5001711 24,519 25 5000532 29,927 10
220 5001637 5001699 28,633 25 5001650 5001712 26,682 20 5001653 38,625 10
230 5001638 5001700 29,727 20 5001651 5001713 27,763 20 5001654 40,546 10
250 5001639 5001701 31,991 20 5001652 5001714 29,921 20 5001655 43,916 10

April 2019 Toll Free : 1800.102.3911 75

THE WORLD LEADER

DIA M18 M20 M22
Length ` Price/ Box ` Price/ Box Part No. Part No. ` Price/ Box
Part No. Part No.
100 Pcs Qty 100 Pcs Qty ISO DIN 100 Pcs Qty
40 5000533 13,030 25 5000546 14,988 25
45 5000534 14,026 25 5000547 16,113 25
50 5000535 14,572 25 5000548 16,929 25 5000567 5000710 27,903 10
55 5000536 15,779 25 5000549 17,589 25 5000568 5000711 29,802 10
60 5000537 16,393 25 5000550 18,528 25 5000569 5000712 32,012 10
65 5000538 17,411 25 5000551 19,616 25 5000570 5000713 32,874 10
70 5000539 18,032 25 5000552 20,742 25 5000571 5000714 34,685 10
75 5000540 19,054 10 5000553 21,534 25 5000572 5000715 36,660 10
80 5000541 19,800 10 5000554 22,557 10 5000573 5000716 37,955 10
85 5000542 20,609 10 5000555 23,436 10 5000574 5000717 40,325 10
90 5000543 21,261 10 5000556 24,387 10 5000575 5000718 41,219 10
100 5000544 22,441 10 5000557 26,153 10 5000576 5000719 42,554 10
110 5000545 30,045 10 5000558 29,829 10 5000577 5000720 46,467 10
120 5001656 32,093 10 5000559 31,700 10 5000578 5000721 50,583 10
125 5001657 33,242 10 5000560 32,670 10 5000579 5000722 51,249 10
130 5001658 34,264 10 5000561 33,821 10 5000580 5000723 52,820 10
140 5001659 36,309 10 5000562 35,840 10 5000581 5000724 56,015 10
150 5001660 38,356 10 5000563 37,965 10 5000582 5000725 60,290 10
160 5001661 40,402 10 5000564 39,690 10 5000583 5000726 64,764 5
170 5001662 42,448 10 5000565 43,208 10 5000584 5000727 69,354 5
180 5001663 44,494 10 5000566 48,195 10 5000585 5000728 72,035 5
200 5001664 48,583 10 5001668 59,744 10 5000586 5000729 79,419 5
220 5001665 53,569 10 5001669 66,294 5 5001672 5001715 83,411 5
230 5001666 55,746 10 5001670 69,291 5 5001673 5001716 86,562 5
250 5001667 59,965 10 5001671 74,229 5 5001674 5001717 93,105 5

76 Toll Free : 1800.102.3911 April 2019

THE WORLD LEADER

DIA M24 M27 M30
Length ` Price/ Box ` Price/ Box ` Price/ Box

100 Pcs Qty 100 Pcs Qty 100 Pcs Qty
50 5000587 32,885 10 5000607 50,864 5
55 5000588 35,031 10 5000608 53,508 5
60 5000589 37,559 10 5000609 55,668 5 5000627 73,686 5
65 5000590 41,286 10 5000610 59,045 5 5000628 77,775 5
70 5000591 42,965 10 5000611 61,703 5 5000629 80,772 5
75 5000592 45,618 10 5000612 64,359 5 5000630 83,768 5
80 5000593 46,614 10 5000613 67,296 5 5000631 86,768 5
85 5000594 48,468 10 5000614 70,263 5 5000632 89,762 5
90 5000595 49,416 10 5000615 72,638 5 5000633 93,299 5
100 5000596 53,885 10 5000616 77,834 5 5000634 100,556 5
110 5000597 59,499 5 5000617 83,991 5 5000635 107,610 5
120 5000598 62,691 10 5000618 89,378 5 5000636 114,242 5
125 5000599 65,151 5 5000619 91,710 5 5000637 117,836 5
130 5000600 65,501 5 5000620 94,589 5 5000638 120,872 5
140 5000601 70,184 5 5000621 98,483 5 5000639 127,502 5
150 5000602 79,230 5 5000622 102,741 5 5000640 134,138 3
160 5000603 80,967 5 5000623 107,981 5 5000641 140,768 3
170 5000604 84,474 5 5000624 113,217 5 5000642 147,399 3
180 5000605 89,163 5 5000625 118,457 5 5000643 154,029 3
200 5000606 96,983 5 5000626 128,931 5 5000644 167,289 5
220 5001675 105,272 5 5001681 138,779 4 5001687 181,194 3
230 5001676 109,392 5 5001682 144,753 4 5001688 188,109 3
250 5001677 119,060 5 5001683 155,165 4 5001689 201,941 3
270 5001678 126,512 4 5001684 165,435 3 5001690 215,774 3
280 5001679 140,036 4 5001685 170,711 3 5001691 222,686 2
300 5001680 146,289 4 5001686 180,980 3 5001692 236,517 2

April 2019 Toll Free : 1800.102.3911 77

THE WORLD LEADER
Hex Head Screws Inch S.S. 304 (BSW)

DIA 1/8 3/16 1/4

Part No. Carton Part No. Carton Part No. Carton
100 Pcs 100 Pcs 100 Pcs
1/2 5011528 210 25000 5011534 218 5000 5011542 412 4000
3/4 5011529 225 16000 5011535 250 4500 5011543 470 3000
1 5011530 240 15000 5011536 283 4000 5011544 544 2400
1 1/4 5011531 416 12000 5011537 341 3000 5011545 617 2000
1 1/2 5011532 520 10000 5011538 447 3000 5011546 698 1600
2 5011533 579 7000 5011539 556 2500 5011547 847 1200
2 1/2 5011540 826 2000 5011548 1,097 1200
3 5011541 994 2000 5011549 1,272 1000
3 1/2 5011550 1,376 800
4 5011551 1,565 800
DIA 5/16 3/8 7/16

100 Pcs 100 Pcs 100 Pcs
1/2 5011552 730 2000 5011563 1,132 1600
3/4 5011553 828 1600 5011564 1,284 1200
1 5011554 950 1600 5011565 1,451 1000 5011575 2,657 400
1 1/4 5011555 1,069 1200 5011566 1,632 800 5011576 2,949 400
1 1/2 5011556 1,194 1200 5011567 1,813 800 5011577 3,201 400
2 5011557 1,429 800 5011568 2,169 600 5011578 3,721 300
2 1/2 5011558 1,678 600 5011569 2,523 500 5011579 4,278 250
3 5011559 1,928 600 5011570 2,881 400 5011580 4,835 200
3 1/2 5011560 2,277 500 5011571 3,232 400 5011581 5,381 200
4 5011561 2,686 500 5011572 3,593 300 5011582 5,900 150
5 5011562 3,255 400 5011573 4,818 250 5011583 7,081 150
6 5011574 5,864 200 5011584 8,139 125
DIA 1/2 5/8 3/4

100 Pcs 100 Pcs 100 Pcs
1 5011585 3,055 400 5011597 5,695 300
1 1/4 5011586 3,391 400 5011598 5,787 250
1 1/2 5011587 3,680 400 5011599 6,256 250 5011609 12,038 150
2 5011588 4,279 300 5011600 7,275 150 5011610 13,278 125
2 1/2 5011589 4,919 250 5011601 8,139 150 5011611 14,893 100
3 5011590 5,561 200 5011602 9,618 150 5011612 16,529 100
3 1/2 5011591 6,188 200 5011603 10,088 125 5011613 18,149 80
4 5011592 6,785 150 5011604 11,005 100 5011614 19,844 80
5 5011593 8,143 150 5011605 13,744 80 5011615 26,446 60
6 5011594 9,360 125 5011606 15,841 60 5011616 30,223 50
7 5011595 14,030 100 5011607 19,752 60
8 5011596 16,930 100 5011608 22,371 60
Speci cation: BS1083, Property Class: 18-8 (A2-70), Material: AISI 304, All Cold Forged & fully threaded up to head.
Marking: Unbrako A2-70
78 Toll Free : 1800.102.3911 April 2019

THE WORLD LEADER
Hex Head Screws Inch S.S. 316 (BSW)

DIA 1/4 5/16 3/8

100 Pcs 100 Pcs 100 Pcs
1/2 5011617 577 4000 5011627 1,022 2000 5011637 1,585 1600
3/4 5011618 658 3000 5011628 1,159 1600 5011638 1,798 1200
1 5011619 762 2400 5011629 1,330 1600 5011639 2,031 1000
1 1/4 5011620 864 2000 5011630 1,497 1200 5011640 2,285 800
1 1/2 5011621 977 1600 5011631 1,672 1200 5011641 2,538 800
2 5011622 1,186 1200 5011632 2,001 800 5011642 3,037 600
2 1/2 5011623 1,536 1200 5011633 2,349 600 5011643 3,532 500
3 5011624 1,781 1000 5011634 2,699 600 5011644 4,033 400
3 1/2 5011625 1,926 800 5011635 3,188 500 5011645 4,525 400
4 5011626 2,191 800 5011636 3,760 500 5011646 5,030 300
5 5011647 6,745 250
6 5011648 8,210 200
DIA 1/2 5/8 3/4

100 Pcs 100 Pcs 100 Pcs
1 5011649 4,277 400 5011659 7,973 300
1 1/4 5011650 4,747 400 5011660 8,102 250
1 1/2 5011651 5,152 400 5011661 8,758 250 5011669 16,853 150
2 5011652 5,991 300 5011662 10,185 150 5011670 18,589 125
2 1/2 5011653 6,887 250 5011663 11,395 150 5011671 20,850 100
3 5011654 7,785 200 5011664 13,465 150 5011672 23,141 100
3 1/2 5011655 8,663 200 5011665 14,123 125 5011673 25,409 80
4 5011656 9,499 150 5011666 15,407 100 5011674 27,782 80
5 5011657 11,400 150 5011667 19,242 80 5011675 37,024 60
6 5011658 13,104 125 5011668 22,177 60 5011676 42,312 50
1. Speci cation : BS1083 4. GST extra as applicable.

2. Property Class : A4 - 70. 5. All Cold Forged & fully threaded up to head.
3. Material : AISI 316. 6. Marking : UNBRAKO A4 - 70.
Hex Nuts - BSW

304 316
` Price/ ` Price/ Pcs/
Size Part No. Part No.
100 Pcs 100 Pcs Box
1/8" 5011678 118 5011688 204 1500
5/32" 5011679 126 5011689 223 1000
3/16" 5011680 126 5011690 200 1000
1/4" 5011681 248 5011691 360 500
5/16" 5011682 349 5011692 511 500
3/8" 5011683 580 5011693 830 200
7/16" 5011684 1,312 5011694 2,076 200 1. Speci cation : BS1083
1/2" 5011685 1,472 5011695 2,178 200 2. Property Class : A2 - 70 for
5/8" 5011686 2,807 5011696 3,929 200 304, A4-80 for 316
3/4" 5011687 6,323 5011697 9,560 50 3. Material : AISI 304, AISI 316.
April 2019 Toll Free : 1800.102.3911 79

THE WORLD LEADER
Hex Nuts Metric S.S. 304/316

S.S. 304 A2 Hex Nut S.S. 316 A4 Hex Nut
Part No. Part No. ` Price/ Pcs/ Pcs/ Part No. Part No. ` Price/ Pcs/ Pcs/
Size Size
ISO DIN 100 Pcs Box Carton ISO DIN 100 Pcs Box Carton
M3 5001319 59 500 9000 M3 5001338 101 500 9000
M4 5001320 76 500 9000 M4 5001339 127 500 9000
M5 5001321 90 500 9000 M5 5001340 155 500 9000
M6 5001322 150 500 9000 M6 5001341 222 500 9000
M8 5001323 301 200 2400 M8 5001342 441 200 2400
M10 5001324 5001334 655 200 2400 M10 5001343 5001352 904 200 2400
M12 5001325 5001335 1,003 200 1600 M12 5001344 5001353 1,425 200 1600
M14 5001326 5001336 1,921 200 800 M14 5001345 5001354 2,863 200 800
M16 5001327 1,964 100 800 M16 5001346 2,849 100 800
M18 5001328 4,580 100 600 M18 5001347 6,570 100 600
M20 5001329 4,048 50 300 M20 5001348 5,462 50 300
M22 5001330 5001337 7,326 50 200 M24 5001349 9,150 50 200
M24 5001331 6,862 50 200 M27 5001350 23,015 25 150
M27 5001332 16,611 25 150 M30 5001351 32,051 25 150
M30 5001333 23,132 25 150
1. Speci cation : DIN 934. 2. Property Class : A2-70 / A4-80. 3. Material : AISI 304 / 316. 4. GST extra as applicable.
5. All Cold Forged. 6. Marking : UNBRAKO A2-70 / UNBRAKO A4-80.
7. Nuts as per IS 1364 / ISO 4032 will be manufactured against speci c order with minimum order quantity each size.
Nylock Nut - 982 Nylock Nut - 985 (ISO 10511)

S.S. 304 (A2-70) S.S. 316 (A4-80) S.S. 304 (A2-70) S.S. 316 (A4-80)
Size ` Price/ ` Price/ Box Carton Size ` Price/ ` Price/ Box Carton
100 Pcs 100 Pcs 100 Pcs 100 Pcs
M3 5010914 161 5010918 242 2000 32000 M3 5010922 153 5010925 230 2000 32000
M4 5010915 177 5010919 266 1000 18000 M4 5010923 168 5010926 252 1000 18000
M5 5010916 227 5010920 341 700 12600 M5 5010924 216 5010927 324 700 12600
M6 5010317 325 5010323 488 500 9000 M6 5009853 309 5009859 464 500 9000
M8 5010318 612 5010324 918 200 2400 M8 5009854 581 5009860 872 200 2400
M10 5010319 1,111 5010325 1,667 200 2400 M10 5009855 1,055 5009861 1,583 200 2400
M12 5010320 1,836 5010326 2,754 200 2400 M12 5009856 1,744 5009862 2,616 200 2400
M16 5010321 3,695 5010327 5,543 100 800 M16 5009857 3,510 5009863 5,265 100 800
M20 5010322 8,752 5010328 13,128 50 300 M20 5009858 8,314 5009864 12,471 50 300
M24 5010917 19,977 5010921 29,966 50 200 M24 5009899 18,978 5009900 28,467 50 200
1. Speci cation : DIN 982. 2. Property Class: A2-70 / A4-80. 1. Speci cation : DIN 985. 2. Property Class: A2-70 / A4-80.
3. Material: AISI 304 / 316. 4. GST extra as applicable. 3. Material: AISI 304 / 316. 4. GST extra as applicable.
5. All Cold Forged. 6. Marking: UNBRAKO A2-70 / UNBRAKO A4-80 5. All Cold Forged. 6. Marking: UNBRAKO A2-70 / UNBRAKO A4-80
80 Toll Free : 1800.102.3911 April 2019

THE WORLD LEADER
Spring Washer Metric S.S. 304/316

FLAT SECTION A2 S.S. 304 SQUARE SECTION A2 S.S. 304
` Price/ Pcs./Box Pcs./Carton ` Price/ Pcs./Box Pcs./Carton
Size Part No. Size Part No.
100 Pcs 100 Pcs
M3 5001386 43 2000 140000 M3 5001403 46 2000 160000
M4 5001387 46 2000 120000 M4 5001404 52 2000 90000
M5 5001388 52 2000 60000 M5 5001405 58 2000 48000
M6 5001389 76 1000 32000 M6 5001406 40 1000 30000
M8 5001390 107 1000 14000 M8 5001407 79 1000 24000
M10 5001391 168 500 7000 M10 5001408 147 500 12000
M12 5001392 254 500 5000 M12 5001409 168 500 7000
M14 5001393 425 200 3200 M14 5001410 293 200 4800
M16 5001394 593 100 3000 M16 5001411 434 100 3000
M18 5001395 688 100 1800 M18 5001412 510 100 2400
M20 5001396 1,012 100 1400 M20 5001413 902 100 1500
M22 5001397 1,171 50 800 M22 5001414 1,052 50 1000
M24 5001398 1,849 50 700 M24 5001415 1,397 50 1200
M27 5001399 2,027 50 700 M27 5001416 1,590 50 700
M30 5001400 3,128 50 500 M30 5001417 2,470 50 500
M33 5001401 4,613 25 200 M33 5001418 2,797 25 400
M36 5001402 4,965 25 350 M36 5001419 4,194 25 350
FLAT SECTION A4 S.S. 316 SQUARE SECTION A4 S.S. 316

` Price/ ` Price/
Size Part No. Pcs./Box Pcs./Carton Size Part No. Pcs./Box Pcs./Carton
100 Pcs 100 Pcs
M3 5001420 58 2000 140000 M3 5001437 61 2000 160000
M4 5001421 61 2000 120000 M4 5001438 71 2000 90000
M5 5001422 74 2000 60000 M5 5001439 76 2000 48000
M6 5001423 104 1000 32000 M6 5001440 55 1000 30000
M8 5001424 143 1000 14000 M8 5001441 110 1000 24000
M10 5001425 229 500 7000 M10 5001442 199 500 12000
M12 5001426 346 500 5000 M12 5001443 229 500 7000
M14 5001427 578 200 3200 M14 5001444 400 200 4800
M16 5001428 807 100 3000 M16 5001445 593 100 3000
M18 5001429 935 100 1800 M18 5001446 694 100 2400
M20 5001430 1,376 100 1400 M20 5001447 1,226 100 1500
M22 5001431 1,592 50 800 M22 5001448 1,427 50 1000
M24 5001432 2,516 50 700 M24 5001449 1,901 50 1200
M27 5001433 2,754 50 700 M27 5001450 2,165 50 700
M30 5001434 4,252 50 500 M30 5001451 3,363 50 500
M33 5001435 6,276 25 200 M33 5001452 3,803 25 400
M36 5001436 6,753 25 350 M36 5001453 5,704 25 350
1. Speci cation : DIN 127 / IS 3063, DIN 7980 / IS 6735.

2. Property Class : A2/A4.
3. Material : AISI 304 / 316.
5. All Cold Forged.
April 2019 Toll Free : 1800.102.3911 81

THE WORLD LEADER
Plain Washer Metric S.S. 304/316

S.S. 304 A2 Plain Washer S.S. 316 A4 Plain Washer
` Price/ ` Price/
Size Part No. Pcs./Box Pcs./Carton Size Part No. Pcs./Box Pcs./Carton
100 Pcs 100 Pcs
M3 5003131 61 2000 140000 M3 5001369 92 2000 140000
M4 5003132 100 2000 120000 M4 5001370 150 2000 120000
M5 5003133 58 2000 60000 M5 5001371 87 2000 60000
M6 5001355 70 1000 32000 M6 5001372 97 1000 32000
M8 5001356 122 1000 14000 M8 5001373 170 1000 14000
M10 5001357 246 500 7000 M10 5001374 345 500 7000
M12 5001358 447 500 5000 M12 5001375 626 500 5000
M14 5001359 673 200 3200 M14 5001376 942 200 3200
M16 5009943 769 100 3000 M16 5001377 1,076 100 3000
M18 5001361 1,120 100 1800 M18 5001378 1,569 100 1800
M20 5001362 1,240 100 1400 M20 5001379 1,737 100 1400
M22 5001363 1,456 50 800 M22 5001380 2,039 50 800
M24 5001364 2,618 50 700 M24 5001381 3,665 50 700
M27 5001365 3,765 50 700 M27 5001382 5,271 50 700
M30 5001366 4,605 50 500 M30 5001383 6,447 50 500
M33 5001367 6,184 25 200 M33 5001384 8,657 25 200
M36 5001368 8,133 25 350 M36 5001385 11,386 25 350
1. Speci cation : DIN 125, ISO 7089. 2. Property Class : A2 / A4. 3. Material : AISI 304 / 316.
4. GST extra as applicable. 5. All Cold Forged. 6. Marking : UNBRAKO A2 / UNBRAKO A4.
Threaded Rod Metric S.S. 304/316

Threaded Rod A2 S.S. 304 Threaded Rod A4 S.S. 316
Size Part No. ` Price/100 Pcs Size Part No. ` Price/100 Pcs
6 X 1 METER 5001454 12,300 6 X 1 METER 5001463 16,900

8 X 1 METER 5001455 20,600 8 X 1 METER 5001464 28,100
10 X 1 METER 5001456 32,500 10 X 1 METER 5001465 44,500
12 X 1 METER 5001457 47,200 12 X 1 METER 5001466 64,600
16 X 1 METER 5001458 86,600 16 X 1 METER 5001467 1,18,600
20 X 1 METER 5001459 1,35,300 20 X 1 METER 5001468 1,85,500
24 X 1 METER 5001460 1,94,900 24 X 1 METER 5001469 2,67,200
27 X 1 METER 5001461 2,45,800 27 X 1 METER 5001470 3,37,100
30 X 1 METER 5001462 3,08,800
1. Speci cation : DIN 975. 5. All Cold Forged Fully Threaded.

2. Property Class : A2 / A4. 6. Price per meter.
3. Material : AISI 304 / 316. 7. Marking : UNBRAKO A2 / UNBRAKO A4.
82 Toll Free : 1800.102.3911 April 2019

Petrochemical
Page Contents
89 Studbolt - Metric
92 Studbolt - Inch
95 Heavy Hex Nut

Petrochemical Fasteners THE WORLD LEADER
Wide Range of Unbrako Studbolts and Nuts for Gas, Petroleum & Chemical Industries.
ISO 9001:2008 and ISO/TS 16949:2002 Quality Assured.
Product Capability
Coatings
Plain (Self Colour) XylanTM
Hot Dipped Galvanized Molybond
TM
Mechanically Plated Cadmium

Zinc Plated Phosphate and Oil
PTFE
Size Range
Diameter Inch : 3/8" to 4"
Range Metric : M10 to M100
Length Inch : upto 10 feet

Range Metric : upto 3 meters
STUDBOLTS Screw Fastening COMPATIBLE NUTS

(ASTM Spec) Material (generic) Material (ASTM Spec)
A193 Grade B7 Cr - Mo 4140 / 4142 / 4145 A194 Grade 2H
A193 Grade B7M Cr - Mo 4140 / 4142 / 4145 A194 Grade 2HM
A193 Grade B8 18 Cr - 8 Ni 304 A194 Grade 8
A320 Grade B8M 18 Cr - 10 Ni - 2 Mo 316 A194 Grade 8M
A193 Grade B16 Cr MoV EN 40CrMoV4 A194 Grade 4 or 7
A320 Grade L7 Cr - Mo 4140 / 4142 / 4145 A194 Grade 4 or 7
A320 Grade L7M Cr - Mo 4140 / 4142 / 4145 A194 Grade 4M or 7M
A193 Grade B5 5 Cr 501 A194 Grade 3
A193 Grade B6 12 Cr 410 A194 Grade 6
A193 Grade B8T 18 Cr - 10 Ni - Ti 321 A194 Grade 8T
* Grey Highlighted items can be made-to-order. Not all material is stocked, however is available on request
THE WORLD LEADER
Stud Bolt with 2 Heavy Hex Nuts Metric

DIA M12 M16 M18 M20 M22

60 350001 3,534 350013 6,802
70 350002 3,876 350014 7,368 350033 10,334
80 350003 4,184 350015 7,933 350034 11,081 350055 14,185
90 350004 4,485 350016 8,509 350035 11,826 350056 15,051 350078 19,863
100 350005 4,794 350017 9,158 350036 12,563 350057 16,011 350079 20,600
110 350006 5,094 350018 9,682 350037 13,258 350058 16,877 350080 21,080
120 350007 5,403 350019 10,292 350038 14,005 350059 17,761 350081 22,212
130 350008 5,755 350020 10,857 350039 14,710 350060 18,670 350082 23,302
140 350009 6,191 350021 11,434 350040 15,446 350061 19,588 350083 24,391
150 350010 6,501 350022 11,997 350041 16,099 350062 20,470 350084 25,524
160 350011 6,802 350023 12,691 350042 16,835 350063 21,381 350085 26,621
170 350012 7,153 350024 13,258 350043 17,546 350064 22,298 350086 27,711
180 350025 13,867 350044 18,284 350065 22,830 350087 28,850
190 350026 14,443 350045 18,979 350066 23,739 350088 29,853
200 350027 15,051 350046 19,717 350067 24,657 350089 30,977
210 350028 15,618 350047 20,420 350068 25,532 350090 32,076
220 350029 16,184 350048 21,123 350069 26,448 350091 33,209
230 350030 16,791 350049 21,859 350070 27,315 350092 34,304
240 350031 17,367 350050 22,556 350071 28,234 350093 35,438
250 350032 17,933 350051 23,302 350072 29,149 350094 36,527
260 350052 24,004 350073 30,025 350095 37,667
270 350053 24,699 350074 30,933 350096 38,756
280 350054 25,437 350075 31,860 350097 39,897
290 350076 32,728 350098 40,986
300 350077 33,643 350099 42,111
320 350100 44,341
1. Studbolt Speci cation : Generally conforming to ASTM A193 / Grade B7.

2. Nut Speci cation : Generally conforming to ASTM A194 / Grade : 2H
3. Note : Prices for ASTM Grade B7M, L7, L7M, L43, B16, B8, B8M. Check availability in stock at the time of order.
5. Products can be supplied with Yellow Zinc Cr6+, Xylan® PTFE, Hot Dip Galvanized and Electro Galvanized Plating.
Prices available on request.
April 2019 Toll Free : 1800.102.3911 89

THE WORLD LEADER

DIA M24 M27 M30 M33 M36
Lenght ` Price/ ` Price/ ` Price/ ` Price/ ` Price/

90 350101 22,006
100 350102 23,654
110 350103 25,393 350126 34,914
120 350104 26,269 350127 36,963 350151 46,697
130 350105 27,581 350128 38,670 350152 48,438 350180 61,406
140 350106 28,892 350129 40,326 350153 50,625 350181 63,978 350208 80,616
150 350107 30,196 350130 42,024 350154 52,812 350182 66,723 350209 83,703
160 350108 31,511 350131 43,676 350155 54,991 350183 69,295 350210 86,792
170 350109 32,821 350132 45,386 350156 56,731 350184 71,869 350211 89,877
180 350110 34,081 350133 47,134 350157 58,918 350185 74,613 350212 92,966
190 350111 35,393 350134 48,885 350158 61,105 350186 76,671 350213 95,539
200 350112 36,655 350135 50,625 350159 62,854 350187 79,414 350214 98,626
210 350113 38,576 350136 52,374 350160 65,033 350188 81,988 350215 101,712
220 350114 39,897 350137 54,116 350161 67,210 350189 84,731 350216 104,817
230 350115 41,199 350138 55,428 350162 69,398 350190 87,647 350217 107,974
240 350116 42,503 350139 57,134 350163 71,584 350191 90,908 350218 110,460
250 350117 43,815 350140 58,832 350164 75,077 350192 93,309 350219 113,547
260 350118 45,127 350141 60,496 350165 77,254 350193 96,053 350220 116,635
270 350119 46,440 350142 62,196 350166 79,433 350194 97,768 350221 119,551
280 350120 47,743 350143 63,858 350167 81,586 350195 100,342 350222 122,640
290 350121 49,057 350144 65,505 350168 83,807 350196 102,914 350223 127,098
300 350122 50,231 350145 67,210 350169 85,548 350197 105,142 350224 130,014
320 350123 52,941 350146 70,574 350170 89,912 350198 110,289 350225 136,188
340 350124 55,557 350147 73,935 350171 93,841 350199 115,606 350226 142,364
360 350125 58,180 350148 77,307 350172 97,768 350200 120,409 350227 148,539
380 350149 80,659 350173 102,132 350201 125,724 350228 154,371
400 350150 84,021 350174 106,070 350202 130,528 350229 160,202
420 350175 109,989 350203 135,846 350230 166,377
440 350176 114,355 350204 140,650 350231 172,038
460 350177 118,282 350205 145,795 350232 178,383
480 350178 122,648 350206 150,598 350233 184,388
500 350179 126,584 350207 156,086 350234 190,390

90 Toll Free : 1800.102.3911 April 2019

THE WORLD LEADER

DIA M39 M42 M45 M48 M52 M56
Length Part No. ` Price/ ` Price/ ` Price/ ` Price/ ` Price/ ` Price/

100 Pcs 100 Pcs 100 Pcs 100 Pcs 100 Pcs 100 Pcs
150 350235 103,427
160 350236 106,859 350261 131,902
170 350237 110,633 350262 136,188 350286 165,160
180 350238 113,891 350263 140,650 350287 169,817 350310 203,942
190 350239 117,321 350264 144,937 350288 174,764 350311 209,601 350333 247,508
200 350240 121,266 350265 149,396 350289 179,585 350312 215,262 350334 253,853
210 350241 124,698 350266 153,685 350290 184,730 350313 221,093 350335 260,201 350355 302,223
220 350242 128,299 350267 158,160 350291 189,276 350314 226,582 350336 267,576 350356 309,601
230 350243 131,902 350268 162,364 350292 194,901 350315 232,413 350337 273,751 350357 317,317
240 350244 135,331 350269 166,737 350293 199,652 350316 238,074 350338 280,783 350358 324,522
250 350245 139,277 350270 170,675 350294 204,455 350317 243,734 350339 287,473 350359 332,070
260 350246 142,706 350271 174,954 350295 209,601 350318 249,567 350340 294,334 350360 339,616
270 350247 146,309 350272 179,413 350296 214,746 350319 255,227 350341 300,851 350361 346,648
280 350248 149,740 350273 183,889 350297 220,408 350320 260,886 350342 307,885 350362 354,196
290 350249 157,287 350274 188,169 350298 225,554 350321 266,635 350343 314,573 350363 361,914
300 350250 160,717 350275 192,466 350299 231,556 350322 272,208 350344 321,433 350364 369,117
320 350251 165,864 350276 201,213 350300 241,676 350323 283,356 350345 335,155 350365 383,526
340 350252 172,724 350277 209,601 350301 248,880 350324 295,363 350346 347,334 350366 398,618
360 350253 179,413 350278 216,119 350302 258,657 350325 306,683 350347 361,229 350367 413,370
380 350254 186,961 350279 222,638 350303 268,606 350326 318,003 350348 374,606 350368 428,293
400 350255 193,821 350280 230,871 350304 275,294 350327 329,325 350349 388,156 350369 443,216
420 350256 200,682 350281 239,275 350305 284,042 350328 340,815 350350 393,302 350370 457,623
440 350257 207,886 350282 247,164 350306 292,790 350329 352,136 350351 406,510 350371 472,375
460 350258 214,746 350283 255,570 350307 301,537 350330 363,629 350352 419,546 350372 487,468
480 350259 221,780 350284 263,836 350308 310,457 350331 374,951 350353 432,581 350373 502,221
500 350260 229,841 350285 272,320 350309 319,034 350332 386,270 350354 445,961 350374 516,970

April 2019 Toll Free : 1800.102.3911 91

THE WORLD LEADER
Stud Bolt with 2 Heavy Hex Nuts Inch

DIA 1/2 5/8 3/4 7/8 1

2 1/4 550309 4,718
2 3/4 550310 5,060 550322 8,643
3 550311 5,413 550323 9,176 550338 14,159
3 1/2 550312 5,755 550324 9,700 550339 14,982 550353 21,834
4 550313 6,107 550325 10,224 550340 15,824 550354 22,983 550368 31,372
4 1/2 550314 6,460 550326 10,745 550341 16,655 550355 24,116 550369 32,847
4 3/4 550315 6,809 550327 11,270 550342 17,461 550356 25,257 550370 34,338
5 550316 7,161 550328 11,793 550343 18,303 550357 26,406 550371 35,848
5 1/2 550317 7,504 550329 12,325 550344 19,126 550358 27,530 550372 37,341
6 550318 7,856 550330 12,839 550345 19,964 550359 28,644 550373 38,799
6 1/2 550319 8,558 550331 14,116 550346 21,629 550360 30,874 550374 41,766
7 550320 8,911 550332 14,639 550347 22,195 550361 32,076 550375 43,259
7 1/2 550321 9,254 550333 15,208 550348 23,019 550362 32,933 550376 44,974
8 550334 16,296 550349 24,595 550363 35,162 550377 47,203
8 1/2 550335 16,869 550350 25,386 550364 36,311 550378 48,935
9 550336 17,391 550351 26,218 550365 37,393 550379 50,686
9 1/2 550337 17,968 550352 26,998 550366 38,509 550380 51,544
10 550367 40,737 550381 54,631
10 1/2 550382 55,950
11 550383 57,700
11 1/2 550384 59,004

92 Toll Free : 1800.102.3911 April 2019

THE WORLD LEADER

DIA 1 1/8 1 1/4 1 1/2 1 5/8

100 Pcs 100 Pcs 100 Pcs 100 Pcs
4 1/2 550385 44,579
4 3/4 550386 46,310 550406 59,862
5 550387 48,508 550407 62,075
5 1/2 550388 50,291 550408 64,254 550429 102,148
6 550389 51,970 550409 66,894 550430 105,487 550458 126,070
6 1/2 550390 55,917 550410 71,696 550431 112,501 550459 134,217
7 550391 57,700 550411 73,876 550432 116,000 550460 138,247
7 1/2 550392 59,415 550412 76,071 550433 120,066 550461 142,364
8 550393 63,378 550413 80,873 550434 126,928 550462 150,426
8 1/2 550394 65,129 550414 83,515 550435 130,358 550463 154,371
9 550395 66,894 550415 85,247 550436 133,788 550464 158,831
9 1/2 550396 69,073 550416 87,871 550437 137,647 550465 162,947
10 550397 72,589 550417 92,691 550438 144,679 550466 170,665
10 1/2 550398 74,732 550418 94,870 550439 148,111 550467 174,954
11 550399 76,482 550419 97,442 550440 150,580 550468 178,728
11 1/2 550400 78,214 550420 99,671 550441 152,656 550469 182,844
12 550401 82,178 550421 104,286 550442 159,516 550470 191,592
12 1/2 550402 83,900 550422 106,687 550443 162,947 550471 195,709
13 550403 85,926 550423 109,072 550444 166,377 550472 200,339
13 1/2 550404 89,860 550424 113,891 550445 173,409 550473 208,057
14 550405 91,782 550425 116,293 550446 177,098 550474 212,689
14 1/2 550426 118,695 550447 180,529 550475 216,805
15 550427 121,095 550448 183,958 550476 221,093
15 1/2 550428 125,897 550449 190,820 550477 228,812
16 550450 194,163 550478 233,100
16 1/2 550451 197,595 550479 237,045
17 550452 200,853 550480 241,162
17 1/2 550453 207,886 550481 249,567
18 550454 211,660 550482 253,853
18 1/2 550455 215,262 550483 257,627
19 550456 222,123 550484 266,203
19 1/2 550457 225,554 550485 270,321
20 550486 274,437
20 1/2 550487 278,553
21 550488 286,445
22 550489 295,019

April 2019 Toll Free : 1800.102.3911 93

THE WORLD LEADER

DIA 1 3/4 1 7/8 2 2 1/4

100 Pcs 100 Pcs 100 Pcs 100 Pcs
6 1/2 550490 162,947 550521 190,905
7 550491 168,093 550522 196,137
7 1/2 550492 172,724 550523 202,037
8 550493 182,328 550524 213,202
8 1/2 550494 186,961 550525 218,607 550554 259,000
9 550495 192,105 550526 224,267 550555 265,003 550585 354,368
9 1/2 550496 196,909 550527 229,841 550556 271,520 550586 362,600
10 550497 206,858 550528 240,732 550557 284,386 550587 379,066
10 1/2 550498 211,660 550529 246,307 550558 290,904 550588 387,642
11 550499 216,548 550530 251,453 550559 296,906 550589 395,875
11 1/2 550500 221,275 550531 257,285 550560 303,596 550590 404,110
12 550501 231,204 550532 268,262 550561 316,376 550591 420,746
12 1/2 550502 235,846 550533 273,751 550562 322,893 550592 428,980
13 550503 240,818 550534 282,242 550563 329,325 550593 437,384
13 1/2 550504 250,081 550535 290,732 550564 341,673 550594 454,021
14 550505 254,807 550536 296,512 550565 348,192 550595 462,685
14 1/2 550506 259,548 550537 301,881 550566 354,368 550596 470,658
15 550507 264,403 550538 307,026 550567 360,884 550597 478,892
15 1/2 550508 273,964 550539 319,375 550568 373,920 550598 492,271
16 550509 278,759 550540 324,693 550569 380,096 550599 500,333
16 1/2 550510 283,579 550541 330,183 550570 386,270 550600 508,739
17 550511 288,673 550542 335,671 550571 392,788 550601 516,627
17 1/2 550512 297,635 550543 346,819 550572 405,223 550602 533,437
18 550513 301,588 550544 352,481 550573 411,655 550603 541,499
18 1/2 550514 307,284 550545 358,141 550574 418,003 550604 549,559
19 550515 317,952 550546 369,117 550575 430,522 550605 566,026
19 1/2 550516 322,634 550547 374,778 550576 437,040 550606 574,020
20 550517 327,575 550548 380,782 550577 442,701 550607 581,977
20 1/2 550518 332,156 550549 386,270 550578 449,390 550608 590,210
21 550519 341,845 550550 397,077 550579 462,254 550609 606,849
22 550520 351,484 550551 408,569 550580 475,461 550610 622,970
23 550552 425,377 550581 494,157 550611 640,982
24 550553 436,354 550582 507,194 550612 664,052
25 550583 526,576 550613 687,978
26 550584 538,583 550614 704,445
27 550615 728,973

94 Toll Free : 1800.102.3911 April 2019

THE WORLD LEADER
Heavy Hex Nuts (ASTM A194 GR2H)

Metric Inch
Size Part No. ` Price/100 Pcs Box Quantity Size Part No. ` Price/100 Pcs Box Quantity
M12 551700 1,175 200 1/2" 470001 1,361 200

M16 270001 1,897 150 5/8" 470002 2,462 125
M18 270002 2,830 100 3/4" 470003 4,012 75
M20 270003 3,671 75 7/8" 470004 6,160 50
M22 270004 4,493 50 1" 470005 8,810 30
M24 270005 6,293 50 1 1/8" 470006 12,276 25
M27 270006 9,429 25 1 1/4" 470007 17,002 15
M30 270007 13,284 25 1 3/8" 470008 22,058 15
M33 270008 17,097 20 1 1/2" 470009 28,343 10
M36 270009 23,412 10 1 5/8" 470010 35,062 8
M39 270010 29,867 10 1 3/4" 470011 44,152 6
M42 270011 38,827 8 1 7/8" 470012 52,167 6
M45 270012 47,635 5 2" 470013 106,717 5
M48 270013 58,119 5
M52 270014 72,412 4
M56 270015 84,304 4
1. Nut Speci cation : Generally conforming to ASTM A194 / Grade 2H

Prestigious Petrochemical Clientele
Separate Petrochemical Catalogue available on request
April 2019 Toll Free : 1800.102.3911 95

THE WORLD LEADER
Terms & Conditions

Delivery:
All oﬀers for delivery from stocks are subject to goods remaining unsold at the time of receipt of order. For forward
delivery, dates are given without any guarantee and no responsibility can be accepted by the company for delay in
delivery or failure to deliver due to circumstances beyond the company's control.
Infringement of patent and trade mark:

When products are forged to customer's drawings and / or speci cations, the responsibility to ensure that these
do not result in infringement of any patent or trademark will lie entirely with customer concerned and the
customer will be solely responsible for the consequence in case of any such infringement.
Order con rmation:

The company accepts no responsibility for orders booked by the company's salesman or representatives, till it is
con rmed in writing by the company.
Acceptance and return:

Wrong dispatches should be noti ed to the company within 15days from the date of receipt of goods and the
Company's consent should be obtained in writing before return of such goods.
Force Majeure:
The company shall not be responsible for failure or delay in delivering the goods or any part thereof (or any
consequential damages) due to acts of God, enemies of the Government of India, wars, revolution, embargo,
riots, civil or political disturbances, strikes, lock-outs, or work stoppages.
Disclaimer
All information contained in this Pricelist has been prepared to assist users in their requirements for fasteners.
The information is based on International Fastener Standards. All such source material and information beyond
the control of Deepak Fasteners Ltd (DFL) is subject to change. .
Whilst every care has been taken to ensure that all information and technical data is accurate, DFL will not be
liable to any customer that relies on any matter, fact or representation nor will it be liable for any subsequent
damage or loss resulting from the use of any information contained in this catalogue. Customers are advised to
make their own enquiries or seek independent advice regarding the tness and suitability of the products listed.
The products listed in this Pricelist might not be stocked at DFL at all times and customers are advised to
enquire the availability of the same. E. & O.E.
96 Toll Free : 1800.102.3911 April 2019

April 2019 Toll Free : 1800.102.3911 97
THE WORLD LEADER
How Identify Unbrako Products

PRODUCT Marking PRODUCT Marking
U-130
Nylock Nut M6 to M24 NBRAK NBRAK
U
O
O
Socket Metric : M4 to M42
x x
Grade : 8 and 10 8 10
12.9
Head
Cap U NBRAK
Inch : 1/4” to 1” BSW Hardened Washer (Type A)
O
Screw x x
M16 to M36
NBRAK
Socket Countersunk Cap Screw High Strength Structural Bolt NBRAK NBRAK
U
U
O
O
M5 & M24 012.9 M16 to M36 8.8S 10.9S
NBRAK
Socket Low Head Cap Screw High Strength Structural Nut NBRAK NBRAK
U
U
O
O
M5 to M20 10.9
M16 to M36 8S 10S
NBRAK NBRAK
Socket Head Shoulder Screw
U
O
High Strength Structural Washer
M6 to M24 012.9
NBRAK U
Bu on Head Socket Screw NBRAK
U
O
Metric : M16 to M27
xx
M5 to M12 012.9
Track Shoe 12.9 12
Size: xx
Bolt and
Flange Bu on Head Socket Screw NBRAK Square Nut Inch : 5/8” to 1” NBRAK
U
O
M5 to M10 012.9
190
BRAKO
Metric : Direct Tension Indicator Washer UN
Grade
DI A
Hexagon 4 A/F to 32 A/F M16 to M27 E-code
Wrench UNBRAKO xx
Set Inch : XX-Size Stainless Steel Socket Head Cap Screw UN
BRAKO
UN
BRAKO
5/32” A/F to 3/4” A/F M5 to M30

x x x x
A2-70 A4-70
Durlok Bolt & Nut BRAK BRAK

Stainless Steel Hex Head Bolt/Screws NBRAK NBRAK
UN
UN
U
O
O
O
M6 to M20 M5 to M30 SS-304/316 A2-70 A4-70
NBRAK NBRAK Stainless Steel Hex Nut NBRAK NBRAK

U
U
U
O
O
Metric : M5 to M48 8.8 10.9 M5 to M30 SS-304/316 A2-70 A4-80

Hex Head
Bolt/Screw SAE-GR8
Inch : All Sizes NBRAK

Stainless Steel Plain Washer
U
NBRAK NBRAK
Metric : M6 to M72,
U
U
O
8 10
Metric : M12 to M56
Studbolt DFL DFL
Hex Nut
and Nuts B7 2H
NBRAK
Inch : 1/2” to 2 1/4”
U
Inch : 1/4” to 1 1/2”

Grade 8 - UNC
According to stamping area on the Product either Unbrako or U130 marking will be used
Note : “X” marking on SHCS is the internal coding for product traceability, it can be changed with any alphanumeric.
All Products of sizes smaller than M5 or 1/4” have no head marking due to space constraint
98 Toll Free : 1800.102.3911 April 2019

THE WORLD LEADER
Specialized Coating
A Product’s lifespan and performance is not only measured by it’s quality, grade and and speci cation, but also by
it’s surface nish. Choosing the correct coating for the application will prevent corrosion, enhance aesthetic value
and add strength to the fastener, extending it’s life and performance. .
Unbrako excels in a variety of coatings done in-house, designed speci cally to provide the required protection in
such harsh environment. Technical information of a few of these coatings is set out below:
ELECTROLYTIC
HOT-DIP METALLIC COATING
MAIN COATINGS COATINGS PTFE
GALVANISATION ZINC FLAKE
ZINC / CADMIUM
Type of material All metals Steels All metals All metals
Process Bath temp. 90°C max. Bath temp. 20°C max. Bath temp. 30°C max.
460°C - 550°C
temperature Baking temp. 200°C max. Baking temp. 300°C max. Baking temp. 300°C max.
Maximum service
temperature without 70°C max 300°C max 300°C max 300°C max
damage of coating
min. Individual - 43µm min. 5 µm

Usual thickness 3 µm to 15 µm 15 µm min
min. Average - 54µm max. Subject to required SST Life
Average without Seizure risks when

Friction 0.16 - 0.22 0.12 - 0.25 0.08 - 0.16
lubrication bolt stress is >40% YS
Coefficient
Average
Friction with no additional
0.08 - 0.12 0.10 - 0.16 0.08 - 0.16
Coefficient lubrication lubrication required
Zine 5 to 7µm : 48 h min

500 Hrs. to 1000 Hrs.
Zinc chromating
Salt spray test (SST)
5 to 7 µm : 96 h min 70µm : 400 h min 1000h min
(red corrosion) Subjected to coating
Reinforced chromating :
Thickness
200 h min
Descaling with
Descaling with
Hydrogen inhibitor
inhibitor No risk process No risk process
embrittlement imperative baking
No risk process
for 100 Mpa steels
Aspect Bright Matt or glossy Matt aluminum Matt Blue
NOTE:- Specialist assistance is recommended when selecting these coatings.
Products are manufactured to meet these standards.

Copyright © 2019 Unbrako. All Rights Reserved.
CENTRAL MARKETING OFFICE:- NORTHERN REGION OFFICE:- EASTERN REGION OFFICE:-
Deepak Fasteners Limited Deepak Fasteners Limited Deepak Fasteners Ltd.
G.T. Road, Miller Ganj, Plot No. 333/38, Near Allahabad Bank, H.M.P. House, Mezannine Floor,
Opp. Ramgariya Gurudwara, Ldh. 141003 Rajiv Colony, Rajiv Chowk, Main Service Rd, Room No.34, No.4 Fairlie Place,
Tel.: 0161-5131111, 7131111 NH-8, Gurgaon, Haryana -122001 Kolkata-700001.
Fax: 0161-2538333, Mob. 93161-69248 Mob. 85588-13658 Mob. 93782-07773
E-mail: [email protected] E-mail: [email protected] E-mail: [email protected]
WESTERN REGION OFFICE:- AHMEDABAD OFFICE:- SOUTHERN REGION OFFICE:-

Deepak Fasteners Limited. Deepak Fasteners Limited. Deepak Fasteners Limited
Office No-233, Bldg-D-8 308, Basant Complex, opp. Hdfc Bank Ega Trade Centre, 1st Floor, Office No. 5,
2nd Floor, Bhumi World, Pimplas House, Above State Bank of India, 809, Poonamallee High Road,
Mumbai Nasik Highway (NH-3) Char Rasta, Navrangpura, Kilpauk, Chennai - 600010
UNB-PINR12-01042019
Dist, Thane-421302. Ahmedabad-380009 Mob.: 90251-17708
Mob. 93237-69275, 93205-62822. Mob. 93756-90170 Tel. No. 044-26612451, 42858843
E-mail: [email protected], E-mail: [email protected] E-mail: [email protected]
[email protected]
S D S D S D S D
AD 2000 15048 ISO IATF ISO OHSAS

14399 9001 16949 14001 18001
UNBRAKO LLC USA UNBRAKO EUROPE UNBRAKO UK UNBRAKO AUSTRALIA UNBRAKO INDIA
11939 Woodruﬀ Ave Deepak Fasteners Shannon Ltd. Deepak Fasteners UK Ltd. Deepak Fasteners Australia Ltd. Deepak Fasteners India Ltd.
Downey, CA 90241 - USA Bays 25-30 Shannon Industrial 12-14 Tower Street, New Town 50-52 Licola Crescent, Dandenong 4th Floor, First Mall, Mall Road
Toll Free: +1-888-456-9181, Estate, County Clare, Ireland Birmingham - B19 3RR, U.K. South, Victoria 3175, Australia Ludhiana- 141001 (Pb.) India
Tel: +1-562-674-3550, Tel: +353-61-716-500, Tel: +44-121-333-4610, Tel: +61-3-8788 1300, Tel: +91-161-5131111, 7131111
Fax: +1-213-402-2547 Fax: +353-61-716-584 Fax: +44-121-333-4525 Fax: +61-3-98940038 Fax: +91-161-2774400

Indian Pricelist

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Indian Pricelist

Uploaded by

Copyright:

Available Formats

THE WORLD LEADER

UNBRAKO ` PRICELIST - APRIL 2019

Contents Thread Page

SOCKET Socket Head Cap Screws Metric 13

DURLOK® Durlok® Screws 34

HEX 10.9 Hex Head Bolts/Screws Metric 38

CONSTRUCTION IS 3757 Heavy Hex Structural Bolts Metric 53

STAINLESS Socket Head Cap Screws 304 Metric 61

PETROCHEMICAL Studbolt Metric 85

Terms & Conditions 92

With an extensive international network in 35 countries,

Unbrako products are primarily used in performance

With advanced manufacturing, engineering and logistics

04 Toll Free : 1800.102.3911

Toll Free : 1800.102.3911 05

Product Terminology TORQUING

HEAD MAJOR DIAMETER

06 Toll Free : 1800.102.3911

Thread Terminology PROOF LOAD

THREAD STRESS AREA SHEAR JOINT

This is the maximum force or stress

The strength level below which a bolt or joint member

that can be applied to a fastener

will have an essentially infinite life under cyclic loading.

Toll Free : 1800.102.3911 07

Thread Size Comparison

Toll Free : 1800.102.3911 09

Limited Warranty and Exclusive Remedy

Deepak Fasteners will at its option, repair or replace

Deepak Fasteners makes no representations or

The remedy provided herein shall be the exclusive

17 Socket Head Cap Screws

20 Countersunk Socket Head Cap Screws (CSK)

21 Socket Low Head Cap Screws (LHCS)

22 Socket Head Shoulder Screws

23 Socket Set Screws (Knurled Cup Point)

26 Button Head Socket Screws

27 Flange Button Head Socket Screws

28 Hexagon Wrench Sets

Higher Min ULT Tensile Wide Radius Threads

Socket Head Cap Screw Metric

April 2019 Toll Free : 1800.102.3911 13

Socket Head Cap Screw Metric

14 Toll Free : 1800.102.3911 April 2019

Socket Head Cap Screw Metric

April 2019 Toll Free : 1800.102.3911 15

Socket Head Cap Screw Metric

M33 M36 M42

16 Toll Free : 1800.102.3911 April 2019

Socket Head Cap Screw Inch (BSW)

April 2019 Toll Free : 1800.102.3911 17

Socket Head Cap Screw Inch (BSW)

18 Toll Free : 1800.102.3911 April 2019

Socket Head Cap Screw Inch (BSW)

April 2019 Toll Free : 1800.102.3911 19

Countersunk Socket Head Cap Screws (CSK) Metric

Length ` Price/ ` Price/ ` Price/ ` Price/ ` Price/

M10 M12 M16 M20 M24

40 103352 2,066 103357 3,317 103361 6,039 106332 11,657

20 Toll Free : 1800.102.3911 April 2019

Socket Low Head Cap Screws (LHCS) Metric

Length ` Price/ ` Price/ ` Price/ ` Price/

M10 M12 M16 M20