Resinex RX k8mb L
Resinex RX k8mb L
Resinex RX k8mb L
Standard Packaging
Standard Design Conditions
• 25 lit. PE valve bag
Bed depth > 700 mm
• 1000 litre big bag
Service flow rate 8 - 45 BV/h
Backwash expansion 50 - 75%
Resinex K-8 MB ™
)
°F
(40
100 F) 100
(50
1.0
8° F)
5°C
(6 6°
°C
C (8
0°
10
Backwash Expansion, %
°C
F)
2
F)
Pressure Drop, kPa/m
°F)
80 80
(40°
8°
0.8
(6
F) F)
(50
4° 6°
°C
5 °C
(10 (8
°C
20
C C
0° 0°
10
60 4 0.6 60 3
40 0.4 40
20 0.2 20
0 0 0
0 20 40 60 80 100 0 4 8 12 16 20
Flow Rate, m/h Flow Rate, m/h
Product Packing
NOTICE Jacobi Carbons reserves the right to change product specifications without prior notification. The information contained in this datasheet is intended to assist a customer in the evaluation and selection of products supplied by Jacobi Carbons. The customer
abcdef
is responsible for determining whether products and the information contained in this document are appropriate for the customers use. Jacobi Carbons assumes no obligation or liability for the usage of the information in this datasheet, no guarantees or warranties,
expressed or implied, are provided. Jacobi Carbons disclaims responsibility and the user must accept full responsibility for performance of systems based on this data.
CAUTION Strong oxidizing agents such as nitric acid can react violently with ion exchange resins and cause explosive type reactions. Before using strong oxidants, consult sources knowledgeable in the handling of these materials.
Lenntech
[email protected] Tel. +31-152-610-900
www.lenntech.com Fax. +31-152-616-289
WORLDWIDE DISTRIBUTORS A diverse network of agents, strategically located around the world
Resinex and Jacobi are trademarks of Jacobi Carbons. © Jacobi Carbons AB, 2010 RX-K8MBH-eng-Rev13-20120321