Professional Documents
Culture Documents
TLE-IA6 Q2 Mod10 SimpleGadgetFurnitureandFinishing V4
TLE-IA6 Q2 Mod10 SimpleGadgetFurnitureandFinishing V4
Technology and
Livelihood Education
Industrial Arts – Module 10:
Simple Gadgets/ Furniture/
Furnishing at Home and in
School
CO_Q2_TLE-IA6_Module 10
TLE – Grade 6
Alternative Delivery Mode
Industrial Arts – Module 10: Simple Gadgets/ Furniture/ Furnishing at Home and in
School
First Edition, 2019
Republic Act 8293, section 176 states that: No copyright shall subsist in any work of
the Government of the Philippines. However, prior approval of the government agency or office
wherein the work is created shall be necessary for exploitation of such work for profit. Such
agency or office may, among other things, impose as a condition the payment of royalties.
Borrowed materials (i.e., songs, stories, poems, pictures, photos, brand names,
trademarks, etc.) included in this module are owned by their respective copyright holders.
Every effort has been exerted to locate and seek permission to use these materials from their
respective copyright owners. The publisher and authors do not represent nor claim ownership
over them.
Each SLM is composed of different parts. Each part shall guide you step-by-
step as you discover and understand the lesson prepared for you.
In addition to the material in the main text, Notes to the Teacher are also
provided to our facilitators and parents for strategies and reminders on how
they can best help you on your home-based learning.
Please use this module with care. Do not put unnecessary marks on any part
of this SLM. Use a separate sheet of paper in answering the exercises and
tests. And read the instructions carefully before performing each task.
If you have any questions in using this SLM or any difficulty in answering the
tasks in this module, do not hesitate to consult your teacher or facilitator.
Thank you.
ii
CO_Q2_TLE-IA6_Module 10
What I Need to Know
This module was designed and written with you in mind. It is here to
help you master the skills in repairing simple gadgets/furniture/ furnishing
at home and in school. The scope of this module permits it to be used in many
different learning situations. The language used recognizes the diverse
vocabulary level of students. The lessons are arranged to follow the standard
sequence of the course. But the order in which you read them can be changed
to correspond with the textbook you are now using.
1
CO_Q2_TLE-IA6_Module 10
What I Know
Directions: Read each question carefully. Chose the letter of your answer
and write your answer in a separate sheet of paper.
2. Any work is made easy, fast and safe if you use ________________.
A. genuine tools C. appropriate tools
B. imported tools D. localized tools
3. What is the usual cause of squeaking sound every time you close and open
the door?
A. rust formed in door hinges C. door is not fit
B. door is too old D. door hinges is not compatible
2
CO_Q2_TLE-IA6_Module 10
8. The following are the sources of information where we can get some ideas.
Which is the most reliable source?
A. videos in YouTube C. from experts
B. other sites in internet D. from your classmates
3
CO_Q2_TLE-IA6_Module 10
Simple Gadgets/ Furniture/
Lesson
1 Furnishings at Home and in
School
For this, it is very important that any member of the family must have
the basic skills and knowledge to do simple repairs to save the cost of repair
services.
What’s In
Directions: Read and analyze each statement. Identify whether the task listed
below should be done, BEFORE, DURING or AFTER. Write the
word in your answer sheet.
4
CO_Q2_TLE-IA6_Module 10
Notes to the Teacher
To our beloved teachers:
The following words listed below are defined according to how
they are referred to this module.
Please help the pupils understand these words.
We encourage you to provide examples as necessary.
Here are some words related to our lesson. Familiarize them before you
proceed with this module.
5
CO_Q2_TLE-IA6_Module 10
What’s New
What is It
In this module you will be guided how to do simple repair of your things
at home. We will suggest also some materials where you can gather
information about simple repair and how to improve what you have repaired.
Nowadays more and more people are using the internet to look for
information and demonstration of skills they wanted to learn. Some are using
books and magazines to get the necessary information or tips for a job.
Others gather tips through research and readings of articles and journals.
6
CO_Q2_TLE-IA6_Module 10
While obtaining ideas from these sources is fun and exciting, still the
best method to gather data is by consulting experts and professionals. Tips,
ideas and technique from them are more reliable and competent.
Materials: Tools:
Steps:
1. Measure about 10 cm. from the end of the wire and separate the two
wires.
2. Strip the insulator cover or skin of each wire about 2 cm. from end.
3. Use a screwdriver to loosen the screw of the male plug to remove the
cover.
4. a. For flat male plug, insert the wire in the hole provided at the
end of the plug, then twist to secure connection. If the plug is screw
type, loosen the screw then insert the wire and lock it with the screw
to secure connection.
7
CO_Q2_TLE-IA6_Module 10
II. Repair of leaking faucet
Materials: Tools:
Steps:
1. Cut off the water supply, by turning the gate valve on off position.
2. Detach the faucet using a pipe wrench. Make sure to cover the nut
with a cloth or tape to avoid scratches while applying force on
turning.
3. Loosen the nut and remove the valve system of the faucet.
4. Loosen the screw to remove the rubber washer or gasket.
5. Replace the rubber washer or the gasket with the new one of the
same kind and size.
6. Put back the screw of the rubber washer or gasket, make sure it is
installed properly.
7. Return the valve system of the faucet into its proper position.
8. Use the pipe wrench to tighten packing nut.
9. Allow the water to flow by opening the gate valve.
10.Check if the water flows properly and if the leakage has stopped.
Materials: Tools:
Steps:
1. Gather all the materials needed.
2. Determine the parts of the chair that needs to be repaired. Collect
them if they are still available.
3. Make a replica of the parts which are lost or damaged.
4. Connect the parts to be repaired using nails.
5. Apply wood glue on the parts to be joined or on parts that wiggle.
6. Install braces to make it stronger.
8
CO_Q2_TLE-IA6_Module 10
IV. Repair of door hinges
Materials: Tools:
You may observe that your door produces a squeaking sound every time
you close and open it. This sound is sometimes due to rust or the door does
not fit properly on the jamb.
1. Make sure that you have the right tools intended for a job to be done.
2. Wear comfortable clothing to allow freedom of movement but make sure
that you have the right personal protective equipment.
3. Work on properly lighted area.
4. Use leather gloves in handling electrical work.
5. Inspect all tools before the start of the job.
6. Repair or replace defective tools before working to avoid accident.
7. Use only appropriate tools for the job to make your work easy, fast, and
safe.
8. Seek expert’s advice or guidance before doing the simple repairs so that
you will be guided accordingly.
9. Clean the area after working.
10.Clean and return all tools to its proper places or cabinet.
9
CO_Q2_TLE-IA6_Module 10
How to assess finish project?
Make it a habit to always check or assess the project you have repaired.
It is a way of knowing how functional your project is, and to become aware of
hazard or possible accident.
You can use the simple rubric below to check how excellent is your
work.
In order to make our gadgets and furniture more attractive, durable and
pleasing to the eyes they need finish.
10
CO_Q2_TLE-IA6_Module 10
What is the common way of applying these finishing materials?
They are called finishing materials or finishes because they are the last
element we apply on our project. Our main reason here is to protect the
materials we used in constructing the project and to enhance the appearance
of our finished product.
Here are some of the purposes why we apply finishes on our product.
11
CO_Q2_TLE-IA6_Module 10
What’s More
Activity 1: Recall Me
1.
2.
3.
4.
5.
Activity 3. Explain to Me
12
CO_Q2_TLE-IA6_Module 10
What I Have Learned
6. There are four common methods of applying finishing materials and the
fastest method is _____________.
13
CO_Q2_TLE-IA6_Module 10
What I Can Do
1. With the help of your parents or guardian, look for a gadget/ furniture/
furnishing in your home that needs repair.
2. Plan on the repair you are going to do. Gather all the materials and list
down the procedure.
3. Do the repair.
4. Make any documentation (before, during and after your repair). This
will be submitted as part of your portfolio.
5. Don’t put any finishes yet. This will be done in your next activity.
6. Write a reflection on the success of repair you have done.
Assessment
I. Multiple choice:
Directions: Read each question carefully, then, write the letter of the
correct on a separate sheet of paper.
1. Any work is made easy, fast and safe if you use ________________.
A. genuine tools C. imported tools
B. appropriate tools D. localized tools
14
CO_Q2_TLE-IA6_Module 10
II. Sequencing:
Apply wood glue on the parts to be connected and on the parts that
wiggle.
Additional Activities
Instructions:
B. Use the rubric we have discussed in this lesson to assess your output.
15
CO_Q2_TLE-IA6_Module 10
CO_Q2_TLE-IA6_Module 10
16
What I Know What's More Assessment
1. A Activity I: I.
2. C 1. B
3. A 1. Protection 2. D
4. B 2. Decoration 3. C
5. D 3. Sanitation 4. D
6. B 4. Sale ability 5. D
7. B 5. Balance II.
8. C Activity 2 & 3 3
9. B
10. D A Note: answer may vary 1
depending on the personal
What’s In: 2
experience of the pupils.
1. After 5
The teacher is encouraged to
2. Before facilitate the checking. 4
3. During
4. During What I have Learned:
5. During
6. During 1. repair
7. Before 2. proper care and
maintenance
8. During
3. reliable
9. Before 4. rubric
10. After 5. finishing materials
6. spray
7. protection
8. considered
9. check valve
10. prolong
Answer Key
References
17
CO_Q2_TLE-IA6_Module 10
For inquiries or feedback, please write or call: