Scribd Logo
Upload

Welcome to Scribd!

  • CRJ200.MTCM Lump 2 (54) .MTCM060 49 310 704

    Uploaded by

    CHIMO
    49 views4 pages
    This document provides instructions for discarding the APU oil filter element on a CRJ200 aircraft. It describes: 1. Opening the necessary access doors and tagging the appropriate circuit breaker. 2. Removing the old oil filter, discarding it, and cleaning components. 3. Installing a new oil filter, lubricating it, and torquing/locking it in place. 4. Closing access doors, removing the tag, and performing oil servicing and leak checks.

    Original Description:

    Original Title

    CRJ200.MTCM-LUMP-2[54].MTCM060-49-310-704

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    This document provides instructions for discarding the APU oil filter element on a CRJ200 aircraft. It describes: 1. Opening the necessary access doors and tagging the appropriate circuit breaker. 2. Removing the old oil filter, discarding it, and cleaning components. 3. Installing a new oil filter, lubricating it, and torquing/locking it in place. 4. Closing access doors, removing the tag, and performing oil servicing and leak checks.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    49 views4 pages

    CRJ200.MTCM Lump 2 (54) .MTCM060 49 310 704

    Uploaded by

    CHIMO
    This document provides instructions for discarding the APU oil filter element on a CRJ200 aircraft. It describes: 1. Opening the necessary access doors and tagging the appropriate circuit breaker. 2. Removing the old oil filter, discarding it, and cleaning components. 3. Installing a new oil filter, lubricating it, and torquing/locking it in place. 4. Closing access doors, removing the tag, and performing oil servicing and leak checks.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 4

    CRJ200

    DATE ISSUED REVISION AIRLINE COMPONENT EFFECTIVITY


    DESIGNATOR
    CODE S/N OFF S/N ON
    NUMBER DATE
    DATE RETURNED
    41 MAY 10/14
    WORK ORDER AIRCRAFT MODEL WORK AREA TASK CARD NUMBER

    CL−600−2B19 300 060− 49−310−704


    STATION AIRCRAFT NUMBER AIRCRAFT HOURS/CYCLES TASK TYPE MAN−HOURS SKILL

    DS 0.08 MECHANIC

    Discard of the APU Oil−Filter Element

    AIRCRAFT EFFECTIVITY: Mechanic Inspector

    **ON A/C ALL


    AMTOSS 49−91−10−000−801
    AMTOSS 49−91−10−400−801
    1. Reason for the Job
    Refer to MRB 49−91−10−03.
    2. Job Set−Up Information
    A. Tools and Equipment

    REFERENCE DESIGNATION
    None specified Container, two−pint (one−liter)
    capacity
    None specified Torque wrench, 0−150 pound−inches
    (0.0−17.0 N·m)

    B. Consumable Materials

    REFERENCE DESIGNATION
    03−001 Oil, lubricating, synthetic base,
    standard, non−corrosion inhibiting
    03−003 Oil, lubricating, synthetic base
    03−010 Oil, lubricating, synthetic base, HTS
    (High Thermal Stability)
    05−004 Lockwire

    C. Parts

    NAME OF PART AIPC FIGURE REFERENCE


    APU Oil Filter IPC 49−91−01−01

    D. Reference Information

    REFERENCE DESIGNATION
    TASK 12−13−49−612−801 Servicing of the APU
    TASK 49−30−00−790−801 APU Fuel and Oil Leak Check

    COMPLAINTS MOVED TO MAINTENANCE CARRY−OVER ITEM NUMBER(S): PAGE 1 OF 4

    Print Date: 2021-03-24


    CRJ200
    DATE ISSUED REVISION AIRLINE COMPONENT EFFECTIVITY
    DESIGNATOR
    CODE S/N OFF S/N ON
    NUMBER DATE
    DATE RETURNED
    41 MAY 10/14
    WORK ORDER AIRCRAFT MODEL WORK AREA TASK CARD NUMBER

    CL−600−2B19 300 060− 49−310−704


    STATION AIRCRAFT NUMBER AIRCRAFT HOURS/CYCLES TASK TYPE MAN−HOURS SKILL

    DS 0.08 MECHANIC

    Discard of the APU Oil−Filter Element

    AIRCRAFT EFFECTIVITY: Mechanic Inspector

    3. Removal Job Set−Up


    A. Open the access doors that follow:

    ACCESS DESIGNATION
    311BB Aft equipment compartment door
    311BZ APU enclosure door
    B. Open, safety, and tag the circuit breaker that follows:

    CB PANEL CB NO. NAME ZONE


    CBP−5 A1 APU ACT 311
    4. Removal Procedure
    Refer to Figure 1.
    A. Remove the oil filter as follows:
    (1) Put the container below the oil filter.
    (2) Remove the lockwire from the filter container (1). Remove
    the filter container (1), the preformed packing (2), and the
    filter element (3) from the lubrication module (4). Discard
    the preformed packing (2).
    (3) Remove the retaining ring (5), the pressure indicator (6),
    and the preformed packing (7). Discard the preformed
    packing (7).
    B. Discard APU oil filter that was removed.
    5. Installation Job Set−Up
    A. Make sure that the aircraft is in the same configuration as in
    the removal task.
    6. Installation Procedure
    Refer to Figure 1.
    CAUTION: THE MIXTURE OF DIFFERENT APPROVED BRANDS OF
    TYPE 2 OILS OR TYPE 1 OILS WITH THE SAME OIL
    CLASS IS APPROVED. HOWEVER, THE INTERMIXTURE
    OF OIL TYPES OR OIL CLASSES MUST BE AVOIDED.
    A. Install the oil filter as follows:

    COMPLAINTS MOVED TO MAINTENANCE CARRY−OVER ITEM NUMBER(S): PAGE 2 OF 4

    Print Date: 2021-03-24


    CRJ200
    DATE ISSUED REVISION AIRLINE COMPONENT EFFECTIVITY
    DESIGNATOR
    CODE S/N OFF S/N ON
    NUMBER DATE
    DATE RETURNED
    41 MAY 10/14
    WORK ORDER AIRCRAFT MODEL WORK AREA TASK CARD NUMBER

    CL−600−2B19 300 060− 49−310−704


    STATION AIRCRAFT NUMBER AIRCRAFT HOURS/CYCLES TASK TYPE MAN−HOURS SKILL

    DS 0.08 MECHANIC

    Discard of the APU Oil−Filter Element

    AIRCRAFT EFFECTIVITY: Mechanic Inspector

    (1) Install a new preformed packing (7) on the pressure


    indicator (6).
    (2) Install the pressure indicator (6) with the preformed
    packing (7) in the container (1). Make sure that the red
    button on the pressure indicator (6) is pushed in.
    (3) Hold the pressure indicator (6) in the container (1) and
    install the retaining ring (5).
    (4) Install the filter element (3) in the container (1) and fill with
    lubricating oil.
    (5) Install a new preformed packing (2) on the container (1).
    (6) Install the container (1) on the lubrication module (4).
    Torque the container to 20 pound−inches (2.3 N·m)
    maximum.
    (7) Safety the container with lockwire.
    7. Close Out
    A. Do the servicing of the oil system (Ref. TASK
    12−13−49−612−801).
    B. Remove all tools, equipment, and unwanted materials from the
    work area.
    C. Remove the tag and close the circuit breaker that follows:

    CB PANEL CB NO. NAME ZONE


    CBP−5 A1 APU ACT 311

    D. Do an oil leak check (Ref. TASK 49−30−00−790−801).


    E. Close the access doors that follow:

    ACCESS DESIGNATION
    311BB Aft equipment compartment door
    311BZ APU enclosure door

    COMPLAINTS MOVED TO MAINTENANCE CARRY−OVER ITEM NUMBER(S): PAGE 3 OF 4

    Print Date: 2021-03-24


    CRJ200
    DATE ISSUED REVISION AIRLINE COMPONENT EFFECTIVITY
    DESIGNATOR
    CODE S/N OFF S/N ON
    NUMBER DATE
    DATE RETURNED
    41 MAY 10/14
    WORK ORDER AIRCRAFT MODEL WORK AREA TASK CARD NUMBER

    CL−600−2B19 300 060− 49−310−704


    STATION AIRCRAFT NUMBER AIRCRAFT HOURS/CYCLES TASK TYPE MAN−HOURS SKILL

    DS 0.08 MECHANIC

    Discard of the APU Oil−Filter Element

    AIRCRAFT EFFECTIVITY:

    3
    LEGEND.
    1. Container.
    2. Preformed packing. 6
    3. Filter element. 7
    4. Lubrication module.
    5. Retaining ring. 2
    6. Pressure indicator.
    7. Preformed packing.

    APU Oil−Filter − Removal/Installation


    Figure 1

    COMPLAINTS MOVED TO MAINTENANCE CARRY−OVER ITEM NUMBER(S): PAGE 4 OF 4

    Print Date: 2021-03-24

    You might also like