Professional Documents
Culture Documents
An Application of Keller's Brand Equity Model in A B2B
An Application of Keller's Brand Equity Model in A B2B
Kerri-Ann L. Kuhn*
Griffith Business School
Department of Marketing
Griffith University
Brisbane, QLD 4111 Australia
PH: +61 7 3735 3729
FAX: +61 7 3735 7126
[email protected]
*Corresponding author
Frank Alpert
Griffith Business School
Department of Marketing
Griffith University
Brisbane, QLD 4111 Australia
PH: +61 7 3735 7344
FAX: +61 7 3735 7126
[email protected]
1
AN APPLICATION OF KELLER’S BRAND EQUITY MODEL IN A B2B
CONTEXT
Abstract
2
Introduction
Powerful brands create meaningful images in the minds of customers (Keller, 1993), with
brand image and reputation enhancing differentiation and having a positive influence on
buying behaviour (Gordon et al., 1993; McEnally and de Chernatony, 1999). Branding in
consumer markets can improve financial performance and long-term competitive position
(Mudambi, 2002). While the power of branding is widely acknowledged in consumer
markets, the nature and importance of branding in industrial markets remains under-
researched.
3
Different sources of brand equity have been proposed. Aaker (1996) for example, proposes
brand awareness, associations, other proprietary assets, perceived quality and loyalty. Often
though, there is no distinction made between consumer and industrial brands. The
differences between consumer and business markets have been discussed elsewhere (Hutt
and Speh, 1998; Kotler, 2003), and organisational buyers have been found to differ in type
of purchase and decision processes (Mudambi, 2002; Thompson et al., 1997/1998; Wilson
and Woodside, 2001). It would seem reasonable that what makes a brand valuable in a
B2B context will differ from that in a consumer environment.
The most comprehensive brand equity model available in the literature is Keller’s (1993,
2001, 2003). Keller claims the Customer-Based Brand Equity (CBBE) model can be
applied in a B2B context, but detailed analysis, a full formal adaptation (such as a
redesigned questionnaire), and empirical evidence are not yet available. Keller recognises
likely general differences between consumer and B2B markets and addresses general issues
of B2B application, but his primary focus is on consumer markets. Grace and O’Cass
(2002) recognised similar limitations in relation to services. We turn now to an overview of
the specific steps in the Keller model and present a discussion drawing from B2B branding
research.
Take in Figure 1
Keller’s argument is as follows (Keller, 2003). The first step in building a strong brand is
to ensure the correct brand identity. The purpose is to create an identification of the brand
with customers, and an association in their minds with a specific product class or need. To
4
do this, brand salience must exist, which represents aspects of brand awareness and the
range of purchase and consumption situations in which the brand comes to mind. The
salience building block is therefore made up of two sub-dimensions - need satisfaction and
category identification.
Business-to-business products also possess image, association and perceptions of value, but
initial awareness and associations are often achieved by direct contact with company
salespeople (Gordon et al., 1993). In industrial markets branding is dependent on the
surrounding distribution network (Gordon et al., 1993; Rosenbroijer, 2001), making the role
of distributors particularly important in building equity. Large organisations often have a
buying centre consisting of a number of parties from various departments, as well as
specialists and other interest groups, all of whom impact the purchase decision (Gordon et
al., 1993; Morris et al., 1999). This makes the process more complex as each member will
possess different needs, and will view the purchase situation, buying criteria and alternative
suppliers in various ways (Ghingold and Wilson, 1998). The Keller model is focused
primarily on individuals’ perceptions of brands in the assessment of brand equity, but in a
B2B context these other influencers can have an impact on brand equity as well.
The second step establishes brand meaning by linking tangible and intangible brand
associations. Brand meaning is therefore characterised in either functional (brand
performance) or abstract (image-related) associations. Functional attributes are 1) primary
ingredients and supplementary features; 2) product reliability, durability and serviceability;
3) service effectiveness, efficiency and empathy; 4) style and design; and 5) price. Image
associations relate to the extrinsic properties of the product: 1) user profiles; 2) purchase
and usage situations; 3) personality and values; and 4) history, heritage and experiences
(Keller 2003).
By contrast, industrial research suggests that brand value has other components including
the product, distribution services, support services and the company, each possessing both
tangible and intangible elements (Low and Blois, 2002; Mudambi et al., 1997). Keller’s
model tends to ignore elements relating to support services (specifically the rapport
between the service provider and customer) and the company (such as profitability, market
share and reputation), which may have greater importance in a B2B context. Similarly,
Thompson et al. (1997/1998) identify other brand attributes associated with the industrial
5
purchasing process. Again, many of these are evident in Keller’s brand meaning construct
but attributes such as technical capability, delivery reliability and responsiveness are not
included.
It appears that quality, reliability, performance and service are primary factors for building
brand loyalty in the industrial context, with quality being paramount (Bendixen et al., 2004;
Michell et al., 2001; Thompson et al., 1997/1998). Keller sees this in the higher order
pyramid block judgments, but ignores the customer relationship with the sales team due to
his concentration on consumer markets. The sales force is a major brand-building tool for
B2B marketers (Lorge, 1998). A buyer’s purchase choice depends not only on their
assessment of the product’s functional benefits, but on their evaluation of the company’s
sales people (Gordon et al., 1993; Michell et al., 2001). These staff are company advocates
who can affect the brand meaning in various ways (Hogg et al., 1998; Kennedy, 1977;
Tilley, 1999).
The Keller pyramid is also focused on the individual brand but B2B products are often
marketed under the manufacturer label, or a hybrid brand, where the company’s name is
used with a specific product name (Gordon et al., 1993; Michell et al., 2001). This makes
the company name an important decision variable. Factors relating to the company behind
the brand form only a minor part of the Keller model, but they are important in a B2B
context (Selnes, 1993; Thompson et al., 1997/1998). For example, Abratt (1986) found
supplier reputation to be more important than price, and Shaw et al. (1989) showed that
intangible attributes are often more important than product performance.
Brand response is the third step in the Keller model and represents opinions and evaluations
of the brand based on a combination of associations identified in brand meaning. These
judgments include quality, credibility, consideration and superiority. Brand feelings are
customers’ emotional responses and reactions to the brand. Keller identifies six types:
warmth, fun, excitement, security, social approval and self respect (Keller, 2003).
This approach reflects a customer focus on the functional, emotional and self-expressive
benefits of brands. In contrast, industrial brand management is characterised by branding at
the corporate level, with greater customer emphasis on risk-reduction than on expressive
benefits (Mudambi, 2002). One way of managing and decreasing risk and uncertainty for
6
the organisation is to buy leading brands from reputable companies (Mitchell, 1995;
Mudambi, 2002). This supports the importance of feelings and imagery in the
organisational buying context, but suggests that different types of feelings and imagery to
those specified by Keller, may be required in a B2B brand equity model.
Brand relationships constitute the final step in the pyramid where brand response is
converted to create an intense, active loyalty relationship between customers and the brand.
The pinnacle of the pyramid is resonance, which refers to the nature of the relationship
between the customer and the brand. It is described as having four elements: behavioural
loyalty, attitudinal attachment, sense of community and active engagement (Keller, 2001).
Customer loyalty generating factors have also been found to be important to the success of
industrial brands (Michell et al., 2001). Unlike consumer markets, the gain or loss of a few
customers can significantly impact an industrial manufacturer’s bottom line. This makes
brand loyalty particularly important as it is, in some respects, firm loyalty (Gordon et al.,
1993). Changes for one individual product may affect perceptions of all products and cause
a distributor to switch suppliers in all categories after a poor experience with an individual
product (Gordon et al., 1993). While there is a lack of research to confirm the existence of
attitudinal attachment and a sense of community in industrial markets, there is evidence of
active engagement. Hutton (1997) found willingness to communicate about the brand and
make brand referrals. He also found that some organisational buyers had developed such a
strong relationship with the brand they were willing to extend to other products with the
same brand name.
In order to assess the applicability of the Keller model in a B2B environment and identify
insights and challenges of such an application, we undertook a study of the market for
electronic tracking systems for waste management. Electronic tracking systems for waste
management represent an interesting market for investigation of Keller’s brand equity
model. The marketing of high-technology products is challenging and the use of brands has
been minimal until recently (Zajas and Crowley, 1995). An increasing number of these
companies however are now undertaking brand building activities with the assumption they
can create an asset that generates long-term profits (Aaker and Jacobson, 2001).
7
Electronic Tracking Systems for Waste Management
Australia’s Environmental Protection Agency (EPA) requires local authorities to maintain
records of the generation, collection, transportation and disposal of hazardous wastes in
their respective shires or counties. Legislation requires an audit trail to prevent illegal
dumping of trade waste. Many local government authorities had been using a docket
system similar to that operated in Europe. A need was recognised by the waste industry to
use environmental management technology in order to comply with reporting requirements.
In response, the profile of companies with electronic means of waste tracking was raised.
Two main competitors operate in this market, offering different types of waste tracking
technologies - a bar code docket system versus a system which uses Global Positioning
System (GPS) satellites. The bar code system aims to streamline the billing process, track
the time and place at which a transporter is discharging waste, and identify a transporter or
load in the case of disruption at a treatment plant. In addition to these benefits, the GPS
system can track the movements of waste while aboard transportation vehicles and record
any volume and load/unload events. The industry is in the introduction stage of the product
life cycle with two councils in the process of deployment of the GPS system, and half a
dozen councils using the bar code system. Other local authorities are postponing their
decision as to which product they will use in order to more accurately assess the two
alternatives.
The current research was conducted in two stages. First, a study was performed to obtain
preliminary insights from buyers regarding branding issues. The purpose was to test a pure
Keller CBBE model and identify what problems would emerge in its empirical application
in a B2B context. A second study was then conducted to validate the findings and address
the limitations of Study 1. A larger sample was tested using a revised questionnaire that
was adapted specifically for the B2B context.
Study 1
Method
Face-to-face interviews were performed with senior management from a waste tracking
company to obtain information about technology, market environment, purchase processes
and councils. From this a survey instrument was developed for use with a sample of
8
councils. The company provided contact details and allowed the use of its brand. A sample
of five Eastern Australian councils was selected for Study 1. Councils were chosen based
on their stage in the purchase decision process and their perceived level of knowledge about
the two main waste tracking brands (the brand using the GPS, from here on termed Brand
A, and the bar code docket system, Brand B). One council was known to be using Brand A,
two were known to be using Brand B, another council was close to releasing a tender for a
system, and the fifth was engaged in initial discussions with the suppliers.
Respondents within five councils were Trade Waste Officers who are responsible for the
pick-up and collection of trade waste in their respective shires. They often initiate and
influence the purchase decision, and ultimately use the technology. Interviews were
conducted by telephone, followed a semi-structured format, and lasted up to 35 minutes.
The survey consisted of a series of closed and open-ended questions, addressing each aspect
of Keller’s Pyramid. Questions asked respondents about the two waste tracking brands and
were ordered based on the sequence of four steps and six brand building blocks in the
CBBE pyramid. The second part asked respondents how they felt about the questionnaire
to test their view of the content and comprehensiveness of the model. The aim was to obtain
direct feedback from respondents as to their opinion of the suitability of the approach, and
to identify limitations inherent in the Keller structure.
Findings
Study 1 revealed the following:
1. Respondents placed a greater emphasis on the manufacturers’ corporate brand
names rather than the individual product brands, and demonstrated greater
awareness of these, suggesting a B2B brand equity framework needs to give major
attention to the corporate brand names.
2. Respondents identified primarily with company brands and spoke about their
relationships with company representatives rather than product brands.
3. Brand elements such as slogans and brand names lacked relevance to respondents
who explicitly stated they were more interested in the product offering.
9
4. When asked about brand associations most respondents identified product
performance features, which would be categorised in Keller’s performance building
block. Style and design which feature in the Keller model, were not mentioned.
6. All respondents seemed to know about the activities of other councils, suggesting
Keller’s sub-dimensions of user profiles and purchase and usage situations have
relevance in an industrial marketing context.
7. Two of Keller’s sub-dimensions under the imagery brand building block were not
mentioned by respondents in this research. The two waste tracking brands did not
possess any personality traits or values, nor did they possess any associations related
to history, heritage or experiences.
8. Aspects of the Keller brand judgments building block appeared relevant in this
organisational purchasing environment, however credibility emerged as an even
more important element. Respondents considered Brand B a proven product and
therefore its manufacturer had more credibility. The technology of Brand A was
regarded as innovative and possibly superior.
9. Keller’s feelings building block lacked relevance in this market, with responses
suggesting the purchase process is more rational than emotive.
10
11. When asked about the suitability of the Keller model approach, one respondent
mentioned he was unsure whether he should have responded based on his own
personal perspective or that of his council, indicating a B2B brand equity model
should take into account the role of the organisation buying centre and the brand
perceptions of all members.
Discussion
Study 1 revealed difficulties in applying a pure Keller model in a B2B context, and
identified further elements potentially in need of inclusion. With the small sample size
however, there was the risk the results were not representative, providing justification for
an extened study with a larger sample to validate the findings. Study 1 also failed to
capture key insights due to the structure of the questionnaire. It was designed based on the
Keller model in its pure form, therefore the purpose of the survey was to assess the equity
of brands of electronic tracking systems for waste management, not their manufacturers.
Respondents who were unaware of the product brand names were not asked subsequent
questions relating to associations, feelings and so on, even if they were aware of the
manufacturer’s brand.
Study 2
The purpose of Study 2 was to take the pure Keller questionnaire from Study 1, adapt it for
B2B based on the feedback and results, and then test the revised survey on a larger sample.
Method
A sample of thirty Eastern Australian local authorities was selected for Study 2. Selection
was based on the population of the region represented (an indicator of whether a council has
a need for an electronic tracking system for waste management is the number of
constituents in the district). From a sample frame of 125 councils, those with less than
10,000 people were eliminated. Of the remaining fifty, thirty were selected based on the
their system knowledge. Twenty-six useable responses were obtained.
11
Telephone interviews followed a semi-structured interview format and lasted between 10
and 40 minutes. Notes taken were later transcribed into word processing files and
conclusions drawn. The survey instrument was similar to Study 1 in that it consisted of a
series of closed and open-ended questions. The survey was again structured in two parts,
with the first consisting of questions following Keller’s guidelines, and the second asking
respondents about the suitability of the Keller model approach. A key limitation of the first
study was that by using the Keller model in its pure form, the questions were designed to
assess the equity of the individual product brands. The second questionnaire therefore
assessed respondents’ recognition of the corporate and product brand names for both
Brands A and B, with respondents then asked about associations for each individually.
Additional questions were incorporated into the questionnaire that represented key findings
of Study 1. In order to understand the role of company representatives in building brand
equity and the importance of the company behind the product, respondents were asked what
aspects of the company and of their relationship with company representatives would be
important in considering to purchase an electronic tracking system for waste management.
A question was also incorporated about credibility. Two questions were introduced to
determine the existence and structure of the organisation buying centre, as well as the role
of respondents in this group. The full questionnaire is provided at Appendix 1. It includes
detailed instructions for the interviewer. Italicised comments explain the conceptual
purpose for each question, although these could be deleted for fieldwork.
Findings
Brand Awareness and Brand Elements
Brand awareness was found to be higher overall for Brand B with brand recognition much
stronger than brand recall. When asked to recall brands of electronic tracking systems for
waste management, 65% of respondents could not think of any, and in only two instances
respondents recalled both the manufacturer and product brands together. A total of 54%
and 96% of respondents recognised the product brand and manufacturer brand respectively
for Brand B. For Brand A, 27% of respondents recognised the product brand, while 42%
recognised the manufacturer’s brand. Breadth of awareness was relatively low for Brand A,
with 23% of respondents correctly recalling the manufacturer when asked about companies
which use GPS to monitor the movements of assets. When asked with which manufacturer
12
respondents associated Brand A , only 28% correctly recalled the manufacturer. When
prompted, all respondents who indicated they did not know, correctly recognised Brand A’s
manufacturer. Awareness of the manufacturer brand names was therefore shown to be
stronger than awareness of the product brands themselves.
For Brand A and its manufacturer, strong associations were evident with GPS tracking,
military technology, and one of the councils currently using the system. Associations for
Brand B and its manufacturer were: waste water/trade waste/bar codes/waste tracking
system, compliance and making sure things are done properly, and again, names of councils
using the system. Overall, the majority of respondents listed more associations when asked
about the manufacturers than when asked about the individual product brands. Most of the
associations provided for the manufacturers related to the systems themselves. In many
instances the same associations were listed for the manufacturer and product brands. To
respondents the product brand and manufacturer brand name were synonymous.
Respondents placed more emphasis on the companies behind the brands than the brands
themselves. Two respondents specifically stated they did not use the product brand when
referring to the systems, but rather used the company names to distinguish between
products. When asked about awareness and associations for the manufacturers and the
product brands, other Trade Waste Officers expressed confusion and asked if these were the
same. The results highlight the importance of measuring the equity of manufacturers’
brand names.
Brand B did not have a slogan, but Brand A did. Only two respondents correctly identified
the brand associated with the slogan. The implication for branding appears to be that B2B
buyers care little about product slogans and more about the product offering.
Brand Associations
Key criteria for assessing brand associations in Keller’s model are their perceived
favourability and uniqueness. Trade Waste Officers were therefore asked open-ended
questions about which factors were most favourable, least favourable and most unique
about Brands A and B. Responses mostly referred to features of the products, which would
fall under the Keller building block performance. Respondents focused on aspects of the
13
brands that would satisfy their functional needs. It should be noted that style and design,
which feature in the Keller model, were again not mentioned.
Subjects were asked what factors would be important to their councils in purchasing an
electronic tracking system for waste management. The most important factors were system
usability and simplicity, and cost/price. Other important factors included system reliability
and dependability, compatibility with existing systems, flexibility, and reporting
functionality. Many of these represent sub-dimensions of Keller’s performance and
imagery building blocks, however some new elements emerged.
When asked what aspects of the company behind the product were important in considering
the purchase of a waste tracking system, the fact that the technology/system is proven
emerged as the most important factor. Around 64% of respondents mentioned such factors
as the manufacturers’ proven track record, experience in the industry and involvement with
other local government authorities. Respondents indicated they wanted to see the system
set up in other councils and wished to speak with these councils to gauge their satisfaction.
Other important factors included after sales service and support, as well as company
stability. Respondents generally wanted to see some indicator of longevity and proof the
supplier would be there to assist them in the future.
When asked about associations for the manufacturers and their brands, amongst the
strongest associations for both Brands A and B were the names of councils using these
systems. Overall, respondents demonstrated detailed knowledge of system users. This
tended to favour Brand B, which is better established in the market and more extensively
used.
Similarly to Study 1, it was found the two waste tracking brands do not possess any
personality traits or values, nor do they possess any associations related to history, heritage
or experiences.
Brand Judgments
When asked about their overall opinion of the waste tracking brands and their quality, 50%
of respondents who were eligible to answer the question stated they did not have an
opinion, or that they did not know. Respondents generally wanted some form of
14
demonstration or exposure to the product before forming a judgment. Other respondents
stated the systems seemed good based on their investigations or initial research.
Several respondents took into consideration the experiences of other users in forming their
brand judgments. Two respondents mentioned that although they had no personal
involvement with the products, they presumed the quality was decent as a result of their
discussions with other councils who were comfortable with the products.
It was evident that both brands were under consideration by all respondents. Both were
considered personally relevant by respondents although cost was an issue. Responses
indicated Brand B was perceived to be superior to Brand A. This seemed to be due to
Brand B being a proven product. The technology of Brand A was again regarded as
superior.
Credibility was one element identified as being of key importance, even more important
than recognised by Keller. In this market, respondents identified primarily with the
manufacturer and spoke about their relationships with company representatives.
Brand Feelings
The responses suggest that feelings do not play an important role in this B2B market,
suggesting the purchase process is more rational than emotive.
Brand Resonance
Brand resonance was not evident. In discussing their experiences, respondents again
referred to product functionality and tangible product performance as reasons for
purchasing. Some respondents, who were already using a waste tracking brand, spoke
about the terms of their contracts and the possibility of switching to the competitive product
following the contract completion. Behavioural loyalty appeared to be a consequence of
the contract period, with respondents stating after this time they would review all products
to determine which would best meet their needs at the right price. Also, although the
experience of other users plays a critical role during the decision making process, the
respondents did not feel any type of kinship or affiliation with other users of the same brand
post-purchase.
15
Nor was active engagement evident. No respondents who had purchased an electronic
tracking system were willing to invest time, energy, money or other resources to get to
know the brands better beyond those expended during purchase and consumption (Keller,
2003: 93). Some Trade Waste Officers indicated they speak with other local government
authorities about the brands they are using, but they did not actively engage in word-of-
mouth communication.
The findings reveal that the application of Keller’s resonance building block in this
organisational context poses difficulties. The buyers generally appeared to keep an
objective, detached perspective (rather than displaying enthusiasm or advocacy). This is a
major difference from consumer brands.
16
Prior research going back many years has shown the importance of the organisational
buying centre (see, for example, Robinson et al., 1967; Sheth, 1973; Spekman and Stern,
1979; Webster and Wind, 1972). For almost all respondents the decision to purchase is
made by a buying centre, which involves a number of parties from across the organisation.
There was no uniform structure identified across the councils surveyed, however all but one
respondent mentioned others would be involved in the decision in some way. In several
cases external parties connected to council were also directly involved, such as ratepayers
and contracted transporters. Respondents expressed concern about the impact of the
technology on these users. Almost a quarter expressed concern about equipment installation
on the waste trucks specifically. Cost was also an important factor and respondents spoke
about who would willingly bear this. Finally, almost 100% mentioned the regulatory body
and its impact on the decision making process.
Discussion
The findings of the second study support those of Study 1, and reveal a number of
dimensions that should be considered when measuring the equity of B2B brands. Many of
these dimensions are found in Keller’s framework, however the emphasis on some of these
dimensions differs. Further factors have also been identified. We present a revised model at
Figure 2.
Overall, assessing the brand equity of the corporate or manufacturer brand names would
seem more appropriate in a B2B context than measuring the equity of the individual
product brands. Second, the salience, performance, imagery and judgments building blocks
are applicable in an organisational context, although differences in the sub-dimensions for
these blocks have been identified. Some brand elements such as product slogans appear to
lack relevance to organisational buyers, while user profiles, purchase and usage situations
and credibility are even more important than suggested by Keller. Feelings did not play a
role in the industrial marketing context and the pinnacle of Keller’s CBBE pyramid,
resonance, may need modifications to be more relevant. Company representatives play a
17
role in building brand equity, thus indicating a need for this human element to be
recognised in a B2B brand equity model
An issue for a single industry case study such as this is of course that of generalisability, but
the findings are consistent with those of Mudambi (2002). Mudambi’s research identified
three clusters of B2B customers, each of which differs in terms of the importance of
branding in the purchase decision. Respondents in the current study most closely identify
with her highly tangible cluster as they indicated physical product improvements were
important, and that their focus was on tangible, quantifiable and objective benefits of the
products and their manufacturers. The emotional and self-expressive benefits were
unimportant, but respondents highlighted the need for support from well-established,
reputable and flexible manufacturers. They acknowledged the importance of a high quality
physical product as well as augmented services. Mudambi claims a combination of a strong
company brand and an effort to differentiate individual brands is likely to be most effective
with firms in this cluster, as they are less receptive to branding. This appears to be the case
in the current study.
The generalisability of our findings may be stronger for industries fitting into Mudambi’s
highly tangible cluster. Our questionnaire is general enough to pick up relevant
associations from other Mudambi industry clusters (such as where feelings are important),
and therefore could be used as a first step in considering how to measure brand equity.
18
industries. Further research is therefore required to validate the findings in different
industrial marketing contexts.
The advantage of the current study is that it captures detailed insights and key lessons from
the field with regards to how B2B brand equity should be conceptualised and measured, by
investigating real brands with real potential B2B buyers. This study is both accessible and
appropriate for marketing practitioners, and even makes available a tested questionnaire
adapting Keller’s model. Though there are unresolved issues, it is still the most developed
questionnaire available in the literature, which can serve as a starting point for managers’
and researchers’ B2B brand equity research.
19
APPENDIX 1: Questionnaire
20
Section 1: The Waste Management Industry Q5 When I say Brand B, what are the first
Q1 When you think of companies which use the associations that come to your mind? Anything
Global Positioning System or GPS to monitor the else?
movements of assets such as vehicles and (ASK QUESTION ONLY IF RESPONDENT ANSWERS
equipment, what brands can you think of? YES IN Q3c)
(Allow the respondent to name as many as they can) (Allow the respondent to name as many as they can.
(Salience-awareness-depth-recall-product category) Prompt for further responses)
1______________________________________ (Competitor salience-awareness & usage-brand specific
OR Competitor imagery-brand meaning-brand
2______________________________________ associations)
3______________________________________ 1______________________________________
4______________________________________ 2______________________________________
5______________________________________ 3______________________________________
6______________________________________ 4______________________________________
waste management, what brands can you think of? 7 Can’t think of any/ Don’t know
(Allow the respondent to name as many as they can) 8 N/A (Not aware of Brand B)
(Salience-awareness-depth-recall-product)
1______________________________________ Q6 With which company do you associate Brand A?
(ASK QUESTION ONLY IF RESPONDENTANSWERS
2______________________________________
YES IN Q3a).
3______________________________________ (Salience-awareness-depth-recall-company/brand
association)
4______________________________________
1______________________________________
5______________________________________
2 Can’t think of any/ Don’t know
6______________________________________ 3 N/A (Not aware of Brand A)
7 Can’t think of any/ Don’t know Q7 Do you associate Brand A with…?
Q3 Answering yes or no, have you ever heard of these (ASK QUESTION ONLY IF RESPONDENT ANSWERS
brands? (Salience-awareness-breadth-recognition) ‘DON’T KNOW’ IN Q6, OTHERWISE INDICATE THEIR
Yes No RESPONSE BELOW BASED ON THE PREVIOUS
a) Brand A 1 2 QUESTION)
b) Manufacturer A 1 2
(Salience-awareness-breadth-recognition-company/brand
c) Brand B 1 2
association)
d) Manufacturer B 1 2 1 Manufacturer A
e) Brand C 1 2 2 Manufacturer E
f) Manufacturer C 1 2 3 Manufacturer B
g) Brand D 1 2 4 A company other than those already specified
5 N/A (Not aware of Brand A)
Q4 When I say Brand A, what are the first
associations that come to your mind? Anything
else? Q8 When I say Manufacturer A, what are the first
(ASK QUESTION ONLY IF RESPONDENT ANSWERS associations that come to your mind? Anything
YES IN Q3a). (Allow the respondent to name as many as else?
they can. Prompt for further responses) (ASK QUESTION ONLY IF RESPONDENT ANSWERS
(Salience-awareness & usage-brand specific OR Imagery- YES IN Q3b).
brand meaning-brand associations) (Allow the respondent to name as many as they can.
1______________________________________
Prompt for further responses)
(Salience-awareness & usage-company specific OR
2______________________________________ Imagery-brand meaning-company associations)
1______________________________________
3______________________________________
2______________________________________
4______________________________________
3______________________________________
5______________________________________
4______________________________________
6______________________________________
5______________________________________
7 Can’t think of any/ Don’t know
8 N/A (Not aware of Brand A) 6______________________________________
21
Q9 When I say Manufacturer B, what are the first Section 2: Electronic Tracking Systems
associations that come to your mind? Anything Q15 What is most favourable about the Manufacturer
else? A system, Brand A?
(ASK QUESTION ONLY IF RESPONDENT ANSWERS (ASK QUESTION ONLY IF RESPONDENT ANSWERS
YES IN Q3d). YES TO EITHER Q3a or b). (Performance, Imagery,
(Allow the respondent to name as many as they can. Judgments, Feelings, Resonance-Strength, Favourability)
Prompt for further responses) 1______________________________________
(Salience-awareness & usage-company specific OR
2______________________________________
Imagery-brand meaning-company associations)
1______________________________________ 3______________________________________
2______________________________________ 4______________________________________
3______________________________________ 5______________________________________
4______________________________________ 6______________________________________
5______________________________________
7 Can’t think of any/ Don’t know
8 N/A (Not aware of Brand A)
6______________________________________
Q16 What is most favourable about the Manufacturer
7 Can’t think of any/ Don’t know B system, Brand B?
8 N/A (Not aware of Manufacturer B) (ASK QUESTION ONLY IF RESPONDENT ANSWERS
Q10 With what brand do you associate the slogan YES TO EITHER Q3c or d). (Competitor Performance,
‘that which can be measured, can be improved’? Imagery, Judgments, Feelings, Resonance-Strength,
(Please tick one) Favourability)
1______________________________________
(Salience-awareness-breadth brand element)
2______________________________________
1 Manufacturer A
2 Brand A 3______________________________________
3 A different GPS tracking brand
4______________________________________
4 A different company not in the satellite tracking
industry 5______________________________________
5 I am not aware of this slogan
6______________________________________
Q11 What does this slogan mean to you about the 7 Can’t think of any/ Don’t know
brand? (Please explain) 8 N/A (Not aware of Brand B)
(Imagery-brand meaning- associations) Q17 What is least favourable about Brand A?
1______________________________________________
(ASK QUESTION ONLY IF RESPONDENT ANSWERS
_______________________________________________ YES TO EITHER Q3a or b). (Performance, Imagery,
Judgments, Feelings, Resonance-Strength Unfavourability)
Q12 Has the council you work for purchased some 1______________________________________
type of waste management technology to monitor
the collection, movement and disposal of waste? 2______________________________________
(Salience-usage/Resonance- loyalty) 3______________________________________
_______________________________________________ 2______________________________________
2 N/A 3______________________________________
(IF THE RESPONDENT IS AWARE OF BRAND A OR 7 Can’t think of any/ Don’t know
BRAND B GO TO SECTION 2 Q15) 8 N/A (Not aware of Brand B)
22
Q19 What is unique about Brand A? Q25 What is your overall opinion of the Brand A
(ASK QUESTION ONLY IF RESPONDENT ANSWERS and/or Brand B brands and their quality?
YES TO EITHER Q3a or b). (Judgments-brand quality)
(Performance, Imagery, Judgments, Feelings, Resonance- 1______________________________________________
Uniqueness) _______________________________________________
1______________________________________
_______________________________________________
23
Q32 What do you think about councils who use Brand (FILL IN CONTACT DETAILS IN SECTION 4 ALREADY
A or other electronic tracking systems for waste KNOWN AFTER HANGING UP FROM RESPONDENT.
management? (Ask which they are referring to) COMPLETE SECTIONS 5 & 6 AFTER HANGING UP
(Imagery-user profiles) FROM RESPONDENT.)
1______________________________________________
Section 4:Contact Details
_______________________________________________
(Complete after hanging up from respondent)
Q33 How interested would you be in learning more
Title: Mr / Mrs / Ms / Miss
about Brand A?
1 2 3 4
[___________[____________[____________] 5 Don’t know Family Name: _________________________________
Very Somewhat Not Very Not at all
Interested Interested Interested Interested Given Names: _________________________________
Q34 How interested would you be in learning more Job Title: _____________________________________
about Brand B?
1 2 3 4 Organisation: __________________________________
[___________[____________[____________] Don’t know
5
Very Somewhat Not Very Not at all Work Phone: ( )______________________________
Interested Interested Interested Interested
Q35 To what extent would you be willing to invest
time, energy, money or other resources to get to Section 5:Demographics
know the brands better? Eg. Investing time to (Complete after hanging up from respondent)
learn more about the brand, visiting the web site, Q1 Number of liquid waste generators in the council’s
talking to others about the brand. region?
(ASK QUESTION ONLY IF RESPONDENT ANSWERS
1__________________ 2 Don’t know
YES TO Q12).
(Resonance-engagement) Q2 Number of constituents/rate payers in the
1______________________________________________ council’s region?
_______________________________________________ 1__________________ 2 Don’t know
_______________________________________________
Q3 Region of council?
1__________________ 2 Don’t know
Section 3: Respondents’ Views of the Survey and
Applicability of the Keller Model Q4 Area of council - per capita per hectare?
I would now like to ask for your help in improving this 1__________________ 2 Don’t know
survey.
_______________________________________________
_______________________________________________
24
FIGURE 1:
4. Relationships
What about you and me?
Resonance
3. Response
Judgments Feelings What about you?
2. Meaning
Performance Imagery What are you?
Salience 1. Identity
Who are you?
25
FIGURE 2:
4. Relationships
Partnership What about you and me?
Solutions
2. Meaning
Performance Reputation What are you?
26
References
Aaker, D.A. (1991), Managing Brand Equity: Capitalising on the Value of a Brand Name,
Free Press, New York.
Aaker, D.A. (1996), Building Strong Brands, Free Press, New York.
Aaker, D.A. and Jacobson, R. (2001) “The value relevance of brand attitude in high-
technology markets”, Journal of Marketing Research, Vol 38 No 4, pp. 485-494.
Abratt, R. and Mofokeng, T.N. (2001) “Development and management of corporate image
in South Africa”, European Journal of Marketing, Vol 35 No 3/4, pp. 368-386.
Bendixen, M., Bukasa, K.A. and Abratt, R. (2004) “Brand equity in the business-to-
business market”, Industrial Marketing Management, Vol 33 No 5, pp. 371-380.
Collins, L. (1977) “A name to conjure with - A discussion of the naming of new brands”,
European Journal of Marketing, Vol 11 No 5, pp. 339-363.
Ghingold, M. and Wilson, D.T. (1998) “Buying centre research and business marketing
practice: Meeting the challenge of dynamic marketing”, The Journal of Business and
Industrial Marketing, Vol 13 No 2, pp. 96-108.
Gordon, G.L., Calantone, R.J. and di Benedetto, A.C. (1993) “Brand equity in the business-
to-business sector: An exploratory study”, Journal of Product and Brand Management, Vol
2 No 3, pp. 4-16.
Grace, D. and O’Cass, A. (2002) “Brand associations: Looking through the eye of the
beholder”, Qualitative Market Research, Vol 5 No 2, pp. 96-111.
Hogg, G., Carter, S. and Dunne, A. (1998) “Investing in people: Internal marketing and
corporate culture”, Journal of Marketing Management, Vol 14 No 8, pp. 879-895.
Hutt, M.D. and Speh, T.W. (1998), Business Marketing Management: A Strategic View of
Industrial and Organisational Markets, 6th Ed, Dryden Press, Fort Worth.
27
Hutton, J.G. (1997) “A study of brand equity in an organisational-buying context”, Journal
of Product and Brand Management, Vol 6 No 6, pp. 428-439.
Keller, K.L. (2001) “Building customer-based brand equity”, Marketing Management, Vol
10 No 2, pp. 14-19.
Keller, K.L. (2003), Strategic Brand Management: Building, Measuring and Managing
Brand Equity, 2nd Ed, Prentice Hall, New Jersey.
Kennedy, S.H. (1977) “Nurturing corporate images”, European Journal of Marketing, Vol
11 No 1, pp. 120-164.
Knox, S. and Bickerton, D. (2003) “The six conventions of corporate branding”, European
Journal of Marketing, Vol 37 No 7/8, pp. 998-1016.
Kotler, P. (2003), Marketing Management, 11th Ed, Prentice Hall, New Jersey.
Lorge, S. (1998) “Better off branded”, Sales and Marketing Management, Vol 150 No 3,
pp. 39-42.
Low, J. and Blois, K. (2002) “The evolution of generic brands in industrial markets: The
challenges to owners of brand equity”, Industrial Marketing Management, Vol 31 No 5, pp.
385-392.
McEnally, M.R. and de Chernatony, L. (1999) “The evolving nature of branding: Consumer
and managerial considerations”, Academy of Marketing Science Review, Vol 1999 No 2, p
1.
Michell, P., King, J. and Reast, J. (2001) “Brand values related to industrial products”,
Industrial Marketing Management, Vol 30 No 5, pp. 415-425.
Mitchell, V.W. (1995) “Organisational risk perception and reduction: A literature review”,
British Journal of Management, Vol 6 No 2, pp. 115-134.
Morris, M.H., Berthon, P. and Pitt, L.F. (1999) “Assessing the structure of industrial buying
centres with multivariate tools”, Industrial Marketing Management, Vol 28 No 3, pp. 263-
276.
28
Mudambi, S., Doyle, P. and Wong, V. (1997) “An exploration of branding in industrial
markets”, Industrial Marketing Management, Vol 26 No 5, pp. 433-446.
Robinson, P.J., Faris, C.W. and Wind, Y. (1967), Industrial Buying and Creative
Marketing, Allyn and Bacon, Boston.
Saunders, J.A. and Watt, F.A. (1979) “Do brand names differentiate identical industrial
products?”, Industrial Marketing Management, Vol 8 No 2, pp. 114-123.
Shaw, J., Giglierano, J. and Kallis, J. (1989) “Marketing complex technical products: The
importance of intangible attributes”, Industrial Marketing Management, Vol 18 No 1, pp.
45-53.
Sheth, J.N. (1973) “A model of industrial buyer behaviour”, Journal of Marketing, Vol 37
No 4, pp. 50-56.
Spekman, R.E. and Stern, L.W. (1979) “Environmental uncertainty and buying group
structure: An empirical investigation”, Journal of Marketing, Vol 43 No 2, pp. 54-64.
Thompson, K.E., Knox, S.D. and Mitchell, H.G. (1997/1998) “Business to business brand
attributes in a changing purchasing environment”, Irish Marketing Review, Vol 10 No 2,
pp. 25-32.
Webster, F.E. and Wind, Y. (1972) “A general model for understanding organisational
buying behaviour”, Journal of Marketing, Vol 36 No 2, pp. 12-19.
29
Wilson, E.J. and Woodside, A.G. (2001) “Executive and consumer decision processes:
Increasing useful sensemaking by identifying similarities and departures”, Journal of
Business and Industrial Marketing, Vol 16 No 5, pp. 401-414.
30