Professional Documents
Culture Documents
Drinking Water GB
Drinking Water GB
The
Service
PAMKIT is a fully optimised product offering design
and logistic benefits for the manufacture of all types
of valve chambers for ductile cast iron drinking water
supply networks.
Its unique presentation as a pack provides a targeted
solution to realize the specific network functions:
venting, isolating, washer out and turn out.
Designed to meet your needs, PAMKIT is a reference
solution for your technical and logistic requirements.
Venting
The VENTING feature on a network allows:
− when operating the network, evacuation of air in small
quantities, at low flow rate ;
− when filling the pipeline with water, evacuation of air in
large quantities, at high flow rate ;
− when draining the pipeline, air intake into the pipeline in
large quantities, at high flow rate.
Isolation
The ISOLATION feature on a network allows:
− interruption of the water flow in the pipeline, to carry out
network maintenance or extension work ;
− shut-off in line ;
− shut-off in line combined with shut-off in branch.
Wash out
The WASH OUT feature on a network allows:
− complete evacuation of the water from the pipeline, (air
intake through the air valve) to carry out network mainte-
nance or extension work.
Turn out
The TURN OUT feature on a network allows:
− an efficient operating and maintenance, combines section-
ing of the main and the branch in the same chamber.
A complete range of products for valves installation
Isolating valves
Couplings P.19
Pipeline Protection
&
KAMELEO Range P.42
Valves & fittings drinking water catalogue Imprimé sur papier PEFC par un imprimeur certifié Imprim’vert >1
A complete range of products
for valves installation
Fitted on pipes in water systems, these valves are closed to interrupt the water
supply or opened to allow to flow in systems.
To cater for operation in specific conditions, Euro 20 gate valves are now
available in motorized versions for nominal diameters (DN) from 40 to 400.
Type of connections
21 23 24 25 27
40
50
250
300
350
400
reference
weight
DN DE Standard version
(kg)
ACC with cap CC without cap
65 77 10,2 RDA65FDXH RDA65FBXH
80 98 11,8 RDA80FDXH RDA80FBXH
100 118 15,1 RDB10FDXH RDB10FBXH
125 144 22,6 RDB12FDXH RDB12FBXH
150 170 30,1 RDB15FDXH RDB15FBXH
(CC) Clockwise Close
(ACC) Anti-Clockwise Close
Protection tube
Extension spindle
Length L = 1 m, square section with operating cap and screw.
section (mm) length (m) weight (kg) reference
28 x 28 1 7.7 RAA28F1
Dc = 1 m Dc = 1.25 m Dc = 1.5 m
DN EURO 20 DN EURO 20
weight weight weight
ACC CC reference reference reference
(kg) (kg) (kg)
40-50-65-80 40 - 50 2.3 162010 2.7 162016 3 162021
100-125-150 65 - 80 3.1 162011 3.7 162017 4.4 162169
- 100 3 162012 3.6 162018 4.3 162022
- 125 - 150 2.8 162013 3.4 162019 4.1 162023
200 to 300 200 to 300 4.4 162014 5.6 162020 6.8 162024
350 to 400 350 to 400 4 162015 5.2 162168 6.4 171249
Notes:
- The extension spindle coupling is delivered already assembled in the operating unit
- For Euro 21 and Euro 23 ACC, an adaptor must be placed between the coupling and the cap: please, consult us.
Headstock
PN 10 joint set
PN 10 Gasket only
(gasket + bolts + nuts)
OD 60 à 300
weight
DN reference reference
(kg)
40 JBA40GV1-E12 0.07 JBA40GV1
60 JBA60GV1-E12 0.11 JBA60GV1
80 JBA80GV1-E12 0.13 JBA80GV1
100 JBB10GV1-E12 0.14 JBB10GV1
125 JBB12GV1-E12 0.17 JBB12GV1
OD 350 à 1000 150 JBB15GV1-E12 0.20 JBB15GV1
200 JBB20GV1-E12 0.26 JBB20GV1
250 JBB25GV1-E12 0.32 JBB25GV1
300 JBB30GV1-E12 0.40 JBB30GV1
350 JBB35GV1-E12 0.90 JBB35GV1
400 JBB40GV1-E12 1.00 JBB40GV1
450 JBB45GV1-E12 1.10 JBB45GV1
500 JBB50GV1-E12 1.20 JBB50GV1
600 JBB60GV1-E12 1.80 JBB60GV1
700 JBB70GV1-E12 2.00 JBB70GV1
800 JBB80GV1-E12 2.80 JBB80GV1
900 JBB90GV1-E12 3.20 JBB90GV1
1000 JBC10GV1-E12 3.50 JBC10GV1
In order to supply reliable and efficient products, Saint-Gobain PAM bases its
design on a combination of cutting-edge techniques and durable materials.
DN PN 10 PN 16 PN 25
150
600
700
800
900
1600
1800
2000
Notes
Consult our regional offices for:
- conformity by standard NFE 29-431,
- handwheel for motorised,
- electrical gear version,
- reinforced version,
- OD 1200.
Protection tube
Extension spindle
FLANGE ADAPTORS
materials
DN ductile iron steel PVC abestos cement
Ultra QUICK
Very large tolerance, PFA 10-16 bar 15
DN 50-300 DE 49-348 40
50
60
QUICK GS anchored 110
For DI pipes, PFA 10-16 bar, DN 60-200 150
200
QUICK GS Simple
For DI pipes, PFA 10-16 bar, DN 60-300 300
COUPLINGS
Ultra LINK
materials
Very large tolerance,
PFA 10-16 bar
DN ductile iron steel PVC abestos cement PE
DN 50-300 DE 49-348
15
LINK GS 40
For DI pipes, 50
PFA 10-16 bar, 60
DN 40-600
110
LINK GS steel body 150
For DI pipes,
PFA 10-16 bar, 200
DN 350-1000
300
LINK GS steel body
For DI pipes, PFA 25 bar,
DN 50-1000
FixLINK anchored
For DI pipes, DN 60-300 1000
FixLINK anchored
For PVE & PE pipes
PFA 16 bar,
DN 40-225
2000
weight references
Type DN flange
(kg) ISO PN 10 ISO PN 16
A-B 50/60/65/80 0,02 MJA60UAXA
C 65/80 0,03 MJA80UAXA
D 100 0,04 MJB10UAXA
E 125 and 150 0,06 MJB12UAXA
F 150 0,09 MJB15UAXA
FP-G-H 200 0,12 MJB20UAXA
I-J 250 0,12 MJB25UAXA 162274
JR-K-L 300 0,09 MJB30UAXA 162275
weight
DN reference
(kg)
60-65 1.85 MAA60CBCH
80 2.30 MAA80CBCH
100 2.70 MAB10CBCH
125 3.70 MAB12CBCH
150 4.70 MAB15CBCH
200* 7.25 MAB20CBCH
* Flange with combined drilling ISO PN 10 and ISO PN 16.
PFA 16
DN weight reference
(kg)
60-65 1.80 MAA60CACH
80 2.25 MAA80CACH
100 2.65 MAB10CACH
125 3.65 MAB12CACH
150 4.60 MAB15CACH
200* 7.15 MAB20CACH
250* 10.9 MAB25CACH
300* 13.8 MAB30CACH
* Flange with combined drilling ISO PN 10 and ISO PN 16
QUICK PVC simple - flange adaptor for PVC pipes - simple version - PFA 16
DE range
type weight (kg) reference
mini (mm) maxi (mm)
A 49 71 3.6 MCX65RAAHA
B 62 84 4.1 MCX75RAAHB
C 80 102 4.9 MCX90RAAHC
D 97 127 7.7 MCY11RAAHD
E 123 153 8.9 MCY14RAAHE
F 151 181 10.4 MCY16RAAHF
FP 170 200 11.5 MCY19RAAHP
G 196 226 13.9 MCY21RAAHG
H 211 241 14.8 MCY22RAAHH
I 235 265 16.2 MCY25RAAHY
J 260 290 18.1 MCY27RAAHJ
JR 285 315 21.3 MCY30RAAHR
K 306 336 22.9 MCY32RAAHK
L 318 348 23.7 MCY33RAAHL
OD range PFA
type weight (kg) reference
mini (mm) maxi (mm) bar
40 55 58 3.26 160280
50 65 68 3.6 MCA50KAEH
60 76 79 40 4.0 MCA60KAEH
80 97 100 4.8 MCA80KAEH
100 117 120 6.18 MCB10KAEH
125 143 146 7.6 MCB12KADH
150 168 172 9.6 MCB15KADH
200 220 223 25 14 MCB20KADH
250 272 275 18.1 MCB25KADH
300 323 327 22.2 MCB30KADH
350 375 379 28.3 MCB35KAAH
400 426 430 33.4 MCB40KAAH
450 477 481 16 37.9 MCB45KAAH
500 529 533 45.6 MCB50KAAH
600 631 636 58.6 MCB60KAAH
LINK GS dedicated coupling for ductile iron pipes PFA16 DN 350 up to 1000
Sealing Ring elastomer type EPDM, steel body.
Coating: black Rilsan 250 microns mini.
DE
weight
DN DE nominal tolerance reference
(kg)
(mm) (mm)
350 378 +2.5 5.5 21,2 MCB35WAAR
400 429 +2.5 5.5 23,7 MCB40WAAR
450 480 +2.9 4 26,2 MCB45WAAR
500 532 +3.5 4.5 29,2 MCB50WAAR
600 635 +3 5 34,2 MCB60WAAR
700 738 +3.5 4.5 39,6 MCB70WAAR
800 842 +1 7 45 MCB80WAAR
900 945 +2 6 88,3 MCB90WAAR
1000 1048 +1 7 96,8 MCC10WAAR
OD maxi
DN weight (kg) reference
OD mini
60 75.8-78 1.5 MCA60NBAZ
80 95.3-99 1.7 MCA80NBAZ
100 115.2-120 1.8 MCB10NBAZ
125 141.2-146 3.3 MCB12NBAZ
150 167.1-171.5 3.7 MCB15NBAZ
200 219-224.2 6 MCB20NBAZ
250 270.3-275.7 6.1 MCB25NBAZ
300 322.4-329.6 6.9 MCB30NBAZ
Angular deflection : + or – 2%.
The setting torque is indicated on the product label.
OD maxi
DN weight (kg) reference
OD mini
40 39.5-40.5 0.6 MCL40PBAZ
50 49.5-50.5 0.6 MCL50PBAZ
63 62.5-63.5 0.8 MCL63PBAZ
75 74.5-75.5 1.5 MCL75PBAZ
90 89 - 91 1.7 MCL90PBAZ
110 109-111 1.8 MCM11PBAZ
125 124-126 3 MCM12PBAZ
140 139-141 3.3 MCM14PBAZ
160 159-161.5 3.5 MCM16PBAZ
180 178.5-182.5 6 MCM18PBAZ
200 198.5-202 6.2 MCM20PBAZ
225 223-227 6.5 MCM22PBAZ
Angular deflection : + or – 2%.
The setting torque is indicated on the product label.
REPLINK Inox Repair collar for pipes of ductile iron, steel, PVC
Double clamp
length = 200 mm length = 300 mm length = 500 mm
DE range PFA weight weight weight
reference reference reference
(kg) (kg) (kg)
88-110 26 7.2 MRY10BAXHE – – – –
114-137 22.5 7.4 MRY12BAXHE 11.5 MRY12BAXHG – –
138-160 20 7.6 MRY15BAXHE 11.7 MRY15BAXHG – –
160-182 17 7.7 MRY17BAXHE 11.8 MRY17BAXHG – –
182-202 15.5 8.0 MRY20BAXHE 12.2 MRY20BAXHG 20.8 MRY20BAXHH
202-224 13.5 8.1 MRY22BAXHE 12.3 MRY22BAXHG 21.0 MRY22BAXHH
217-240 12.5 8.2 MRY24BAXHE 12.4 MRY24BAXHG 21.2 MRY24BAXHH
240-262 10.5 – – 12.8 MRY25BAXHG 21.7 MRY25BAXHH
262-284 9.5 – – 12.9 MRY28BAXHG 22.3 MRY28BAXHH
273-296 9 – – 13.4 MRY29BAXHG 22.6 MRY29BAXHH
296-319 8 – – 13.3 MRY30BAXHG 23.0 MRY30BAXHH
324-346 6.5 – – 13.6 MRY33BAXHG 23.8 MRY33BAXHH
346-368 6 – – 13.8 MRY35BAXHG 23.8 MRY35BAXHH
365-387 5.5 – – 14.0 MRY37BAXHG 24.3 MRY37BAXHH
387-410 4.5 – – 14.3 MRY40BAXHG 25.6 MRY40BAXHH
410-432 4 – – 14.6 MRY42BAXHG 26.1 MRY42BAXHH
428-450 3.5 – – 14.8 MRY44BAXHG 25.8 MRY44BAXHH
450-474 3 – – 15.6 MRY46BAXHG 27.0 MRY46BAXHH
470-492 2.5 – – 15.7 MRY48BAXHG 27.3 MRY48BAXHH
492-516 2.5 – – 15.8 MRY50BAXHG 27.8 MRY50BAXHH
Triple clamp
length = 200 mm length = 300 mm length = 500 mm
DE range PFA weight weight weight
reference reference reference
(kg) (kg) (kg)
300-330 7 12.2 MRY30CAXHEN 18.2 MRY30CAXHGN 31.3 MRY30CAXHHN
330-360 6 12.2 MRY33CAXHEN 18.4 MRY33CAXHGN 31.8 MRY33CAXHHN
360-390 5.5 12.8 MRY36CAXHEN 18.7 MRY36CAXHGN 32.2 MRY36CAXHHN
390-420 4 12.8 MRY39CAXHEN 19.2 MRY39CAXHGN 33 MRY39CAXHHN
420-450 3.5 13.6 MRY42CAXHEN 19.5 MRY42CAXHGN 34.1 MRY42CAXHHN
450-480 3 13.7 MRY45CAXHEN 19.7 MRY45CAXHGN 34.2 MRY45CAXHHN
480-510 2.5 13.8 MRY48CAXHEN 19.9 MRY48CAXHGN 34.3 MRY48CAXHHN
510-540 2 13.8 MRY51CAXHEN 20 164031 35.8 MRY51CAXHHN
540-570 2 13.9 MRY54CAXHEN 20.8 MRY54CAXHGN 36.7 MRY54CAXHHN
570-600 2 14.3 MRY57CAXHEN 21.4 MRY57CAXHGN 36.9 MRY57CAXHHN
600-630 2 14.4 MRY60CAXHEN 21.6 MRY60CAXHGN 38.2 MRY60CAXHHN
630-660 2 14.4 MRY63CAXHEN 21.7 MRY63CAXHGN 38.4 MRY63CAXHHN
660-690 2 14.7 MRY66CAXHEN 22.4 MRY66CAXHGN 40.3 MRY66CAXHHN
690-720 2 15.4 MRY69CAXHEN 22.6 MRY69CAXHGN 40.5 MRY69CAXHHN
720-750 1 15.5 MRY72CAXHEN 23.2 MRY72CAXHGN — —
OD weight
type DN reference
mini maxi (kg)
W2-A 40 54 61 MRA40SACA 6.0
W2-B 50 60 68 MRA50SACB 5.9
W2-C 60 76 87 MRA60SACC 8.3
W2-D 80 89 98 MRA80SACD 8.6
W2-F 80 95 108 MRA80SACF 8.4
W2-G 100 108 118 MRB10SACG 11.6
W2-I 100 116 128 MRB10SACY 11.2
W2-J 125 133 144 MRB12SACJ 13.8
W2-L 125 142 153 MRB12SACL 13.7
W2-M 150 159 172 MRB15SACM 21.3
W2-P 150 168 184 MRB15SACP 22.3
W2-Q 175 193 203 MRB17SACQ 39.9
W2-R 200 214 225 MRB20SACR 37.5
These equipments comply with the standard NFE 29220, specially concerning the flanges dimensions according to
NFE 29203 and 29209
The full-flange sliding body: the flange is according to ISO 7005 standard.
The stroke range is higher than those demanded in the NFE 29220
material
designation
standard version reinforced version
Fixed body Steel EN 10025 S235JRG2 Steel EN 10025 S235JRG2
Gland Steel EN 10025 S235JRG2 Steel EN 10025 S235JRG2
Sliding body Steel EN 10025 S235JRG2 Steel EN 10025 S235JRG2
Gasket EPDM rubber EPDM rubber
Tie bars Steel EN 10025 S235JRG2 or S335J2G3 grade 6/8 Steel EN 10025 S235JRG2 or S335J2G3 grade 6/8
PFA 10 PFA 16
DN weight weight
reference reference
(kg) (kg)
50 MDA50EACH 6 MDA50EACH 6
65 MDA65EACH 7.5 MDA65EACH 7.5
80 MDA80EACH 9 MDA80EACH 9
100 MDB10EACH 13 MDB10EACH 13
125 MDB12EACH 17 MDB12EACH 17
150 MDB15EACH 21 MDB15EACH 21
200 MDB20EABH 29 MDB20EAAH 29
250 MDB25EABH 38 MDB25EAAH 44
300 MDB30EABH 46 MDB30EAAH 55
350 MDB35EABH 57 MDB35EAAH 77
400 MDB40EABH 72 MDB40EAAH 98
450 MDB45EABH 80 MDB45EAAH 122
500 MDB50EABH 90 MDB50EAAH 156
600 MDB60EABH 120 MDB60EAAH 222
112 113
weight
type DN PFA reference
(kg)
4000 S 50 oct-25 9 203930
4000 S 60-65 oct-16 9 203935
4000 S 60-65 25 9 203938
6000 S 80 oct-25 20 232946
Triple function air valves type "D" without isolating valve PFA 10-16-25
weight
type PFA DN flanges reference
(kg)
16 50-60-65 PN 10-16 15 RCA60DSAH
4000 25 50 PN 25 15 RCA50DSDH
25 60-65 PN 25 15 RCA60DSDH
16 80 PN 10-16-25 25 RCA80DSAH
6000
25 80 PN 10-16-25 25 RCA80DSDH
16 100 PN 10-16 38 RCB10DSAH
25 100 PN 25 38 RCB10DSDH
9000
16 150 PN 10-16 42 RCB15DSAH
25 150 PN 25 42 RCB15DSDH
Flanges in accordance with Standard ISO 7005.
lever operated
weight (kg) reference
DN
PN 10 PN 16 PN 25 PN 10 PN 16 PN 25
50 5.9 5.9 5.9 211707 211707 211707
60 6.9 6.9 7.5 211710 211710 211742
65 6.9 6.9 7.5 211743 211743 211747
80 8.4 8.4 8.4 211748 211748 211749
100 10.7 10.7 10.7 208521 208521 211761
150 15.2 15.2 15.2 211762 211762 211776
handwheel operated
200 29.5 29.5 29.5 211777 211778 211779
standard reference
version PFA 10 PFA 16 PFA 25
flange DN 60 RCA60BUCH RCA60BUCH RCA60BUDH
flange DN 65 RCA65BUCH RCA65BUCH RCA65BUDH
Reinforced version please, consult us.
Triple function air valves type "Ventex" high flow rate with isolating valve
PFA 10-16-25
Air Valves Type VENTEX exist in a range stretching from DN 50 to 200, for pressure PFA 10, PFA 16 and PFA 25.
Equipped with a built-in isolating valve.
FAST CHOICE OF A VENTEX: allows during the empting of the main with a speed 1m/s.
standard version
reference
weight (kg)
DN PFA 10 PFA 16 PFA 25
cap version
handwheel cap handwheel cap handwheel cap
50 22 RCA50CSBHV RCA50CSBH RCA50CSAHV RCA50CSAH RCA50CSDHV RCA50CSDH
60 24 RCA60CSBHV RCA60CABH RCA60CSAHV RCA60CAAH RCA60CSDHV RCA60CADH
65 24 RCA65CSBHV RCA65CSBH RCA65CSAHV RCA65CSAH RCA65CSDHV RCA65CSDH
80 40 RCA80CSBHV RCA80CABH RCA80CSAHV RCA80CAAH RCA80CSDHV RCA80CADH
100 40 RCB10CSBHV RCB10CABH RCB10CSAHV RCB10CAAH RCB10CSDHV RCB10CADH
150 115 RCB15CSBHV RCB15CABH RCB15CSAHV RCB15CAAH RCB15CSDHV RCB15CADH
200 170 RCB20CSBHV RCB20CABH RCB20CSAHV RCB20CAAH RCB20CSDHV RCB20CADH
reinforced version
reference
DN PFA 10 b PFA 16 b PFA 25 b
handwheel handwheel handwheel
50 179067
please, please,
60 please,
consult us consult us
65 consult us
80 181725 181726 181727
100 178928 178930 178943
150 178944 178945 178946
200 178947 178948 178949
Ask our local agent for support on the choice of the valve and our spare parts list.
pressure reducer/sustainer
pressure reducer E 2115-00 pressure sustainer E 2116-00
weight E 2115-02
DN pressure range 1.4/12 bar pressure range 1,4/14 bar
(kg) pressure range 1.4/12 bar
reference reference reference
50 20 RCA50DBCHA RCA50DCCHB RCA50DDBHE
65 23 RCA65DBCHA RCA65DCBHB RCA65DDBHE
80 25 RCA80DBCHA RCA80DCBHB RCA80DDBHE
100 36 RCB10DBCHA RCB10DCCHB RCB10DDCHE
125 51 RCB12DBCHA RCB12DCCHB RCB12DDCHE
150 62 RCB15DBCHA RCB15DCCHB RCB15DDCHE
200 110 RCB20DBBHA RCB20DCBHB RCB20DDBHE
250 191 RCB25DBBHA RCB25DCBHB RCB25DDBHE
300 320 RCB30DBBHA RCB30DCBHB RCB30DDBHE
400 603 RCB40DBBHA RCB40DCBHB RCB40DDBHE
500 935 RCB50DBBHA RCB50DCBHB RCB50DDBHE
600 1280 RCB60DBBHA RCB60DCBHB RCB60DDBHE
700 2148 RCB70DBBHA RCB70DCBHB RCB70DDBHE
Note: References for DN 150: flanges drilled DN 10
Ask our local agent for support on the choice of the valve and our spare parts list.
Note: references for flanges PN 10. On DN 150 the flanges are drilled PN 10/16.
PFA 16, pressure range: 6 to 12 bar PFA 25, pressure range: 16 to 25 bar
DN
reference* weight (kg) reference** weight (kg)
60 161866 34 161850 34
65 161853 34 161852 34
80 167046 38 161854 38
100 161872 42 167066 42
125 161856 54 167077 54
150 167093 78 167091 78
200 167105 88 161875 88
Manometers
pression reference
0 - 10 202458
0 - 16 202297
0 - 25 202298
Needle valves
Control valves: The needle valve is able to modulate the flow-rate of wa-
- Pressure regulating valve PFA16 bar ter while providing gradual operation even when large re-
- Flow regulating valve PFA10 bar ductions in flow and high headlosses are needed. The
- Electric operated on-off valve PFA16 bar possibility of using actuators with a continuous regula-
- Level control valve PFA10 bar tion scale allows the use of control systems to provide
- Pressure relief valve multiple functions.
- Spring operated pressure reducing valve PFA16 bar They are available for manual operation or with electric
- Manometers actuator.
6 7 8 9
13
10
11
5 1 17 14 16
15 12
Internal and external coating: (fusion bonded) epoxy powder, 250 microns minimum thickness - RAL 5005.
Needle valves
A B
C
E
D
L DN
Needle valves
A B
C
E
D
L DN
A B
C
E
D
L DN
References
Manual operated version Electric operated version
DN
PN 10 PN 16 PN 25 PN 10 PN 16 PN 25
weight weight weight weight weight weight
(mm) reference reference reference reference reference reference
(kg) (kg) (kg) (kg) (kg) (kg)
100 59 203357 59 203357 59 203360 84 203354 84 203354 84 203359
150 89 203365 89 203365 89 203372 115 203362 115 203362 115 203371
200 146 181860 146 203388 146 203395 166 203375 166 203380 166 203394
250 212 203400 212 203406 212 203413 232 203399 232 203402 232 203411
300 360 203416 360 203422 360 203428 380 203415 380 203418 380 203426
350 430 203432 430 203436 430 203443 465 203431 465 203434 465 203442
400 570 203446 570 203451 583 203456 598 203445 598 203447 611 203455
450 782 203458 782 203461 782 203466 829 203457 829 203460 829 203464
500 860 203468 860 203471 860 203477 898 203467 898 203470 898 203475
600 1455 203487 1455 203492 1514 203504 1503 203484 1503 203489 1562 203502
700 2050 203506 2050 203509 2050 203512 2087 203505 2087 203507 2087 203513
800 2675 203515 2675 203516 2675 203519 2712 203514 2712 203517 2712 203520
900 3590 203522 3590 203525 3590 203527 3636 203523 3636 203524 3636 203526
1000 4100 203529 4100 203537 — — 4121 203528 4121 203536 — —
Strainer PFA 16
reference
Operating key 161750
Cover with bolts 184087
Ventilation chimney 161751
ELANCIO
DEDICATED FLANGE ADAPTOR for ductile iron pipes
standard or anchored version
H non-traffic versionHcwithout
=1m
adjustment module
Hc = 12.5 m
DN
weight (kg) reference weight (kg) reference
80* 81 RYA80FEBAC 103 RYA80FVCAC
100 83 164250 105 164252
Available with outlet connections complying with standards NF, NBN, UNI, UNE, AWWA, STORZ, GOST, BS.
UNI DN 70 DN 100
Weight of DN 80 with duck foot bend, depth of cover 1 m: 48.5 kg.
Weight of DN 100 with duck foot bend, depth of cover 1 m: 57.5 kg.
Weight of the surface box: 28.5 kg.
UNE DN 2"5
Bomberos DN 4"
Available with outlet connections complying with standards NF, NBN, UNI, UNE, AWWA, STORZ, GOST, BS.
Weight of DN 80 with duck foot bend, depth of cover 1 m: 48.5 kg.
Weight of DN 100 with duck foot bend, depth of cover 1 m: 57.5 kg.
Weight of the surface box: 28.5 kg.
Articulated T Keys
www.pamline.com
Fittings from
DN 60 to 2000
networks for
maintenance
and repair work
KAMELEO
flanged kit
KAMELEO
Express Vi
"special insertion" DN 80-100-150
kit
, l'INNOVATION
2009