Atego 1018
Atego 1018
1018
ATEGO Rigid Trucks EURO III
9.5 & 10.5t GVW
177 BHP
ENGINE 918, 1018
Type Mercedes-Benz OM904LA Performance
4.25 litre turbo-intercooled Curves
4 cylinder direct injection
diesel to Euro 3 and ERGA noise
standards
Max. power 130kW @ 2200 rpm
177bhp @ 2200 rpm
Max. torque 675Nm @ 1200-1600 rpm
498lbft @ 1200-1600 rpm
Bore 102 mm
Stroke 130 mm
Capacity 4.25 litres
Control Electronic engine management
Fuel injection Direct injection via unit injectors
Cooling Water cooled with viscous fan
Immobiliser Standard
Engine brake Constant throttle with butterfly
TRANSMISSION
Brakes Suspension
Front/Rear –Disc brakes (335mm dia) Front axle: –Parabolic leaf springs
Service –Dual circuit air system –Double acting shock absorbers
–Self adjusting –Stabiliser
–Air dryer Rear axle: –Parabolic dual rate leaf springs
Secondary/ –Progressive rear spring brake actuators –Double acting shock absorbers
Parking –Stabiliser
Load sensing –Rear axle Rear axle: –Air suspension
(Optional) –Twin bellow rolling lobe
–Single leaf guide spring
–Control valve +120 mm, -80 mm
–Double acting shock absorbers
–Stabiliser
–Electronic level adjustment
CHASSIS Steering Electrical Systems (featuring CAN bus technology)
Type –Recirculating ball Voltage 24 volt, negative earth Road lights –Halogen headlamps
–Integral power assistance Battery 2 x 12 volt 115Ah – Headlamp levelling
–Variable ratio Alternator 28 volt/80 amp – Side lights
–Steering column lock Warning – ABS – Roof marker lights
–Adjustable column indicators –Engine oil pressure –Side marker lights
– Battery no charge – Reversing lights
Fuel Tank – Main beam/flasher – Indicator side repeaters
– Direction indicators – Rear fog lamp
Capacity –125 litre plastic tank – Engine pre-heater
–Locking fuel cap – Brake pressure Electronic – Air Filter condition
Mounting –Right side of chassis – Parking brake Function – Air reservoir
– Rear fog lamp check condensation
– Hazard lights – Brake pad wear
Other Features – Cab tilt lock – Coolant level
– Brake lining wear – Engine oil level and
–2 piece ladder frame, high tensile steel – Engine brake pressure
– Channel section sidemembers – Obligatory lightbulbs
–Z section cab mounting frame – Washer bottle level
–Rear wings
–Front and rear spray suppression
–Side and rear underride guards
CAB
– One bunk with stowage underneath High Roof Sleeper cab (optional) (LR)
– Reading light above bunk
– Curtains all round As L cab, plus:
– Hydraulic cab tilt – High roof
– 4 point spring suspension – Additional storage capacity above windscreen
– 50 litre lockable storage box on chassis – Electric glass tilting sunroof
– Night heater – 2 coat hooks
– External sunvisor
– 3 internal sunvisors
OPTIONS
Dimensions (mm)
918 918 918 918 918 1018 1018 1018 1018 1018
A Wheelbase 3020 3320 3620 4220 4820 3020 3320 3620 4220 4820
B Front overhang 1380 1380 1380 1380 1380 1380 1380 1380 1380 1380
C Rear overhang (day cab) 1535 1685 1885 2285 2685 1535 1685 1885 2285 2685
Rear overhang (sleeper cab) – 1685 1485 1885 2285 – 1685 1485 1885 2285
D Overall length (day cab) 6025 6565 7065 8065 9065 6025 6565 7065 8065 9065
Overall length (sleeper cab) – 6565 6665 7665 8665 – 6565 6665 7665 8665
E Frame height at rear axle (steel susp.) 880 880 880 880 880 906 906 906 906 906
Frame height at rear axle (air susp.) – – 831 831 831 – – 834 834 834
F Frame depth 230 230 230 230 232 230 230 230 230 232
G Back of cab to end of frame (day cab) 4285 4735 5235 6235 7235 4285 4735 5235 6235 7235
Back of cab to end of frame (sleeper cab) – 4135 4235 5235 6235 – 4135 4235 5235 6235
H Bumper to back of cab 1650 1650 1650 1650 1650 1650 1650 1650 1650 1650
I Cab rear to f/axle (day cab) 270 270 270 270 270 270 270 270 270 270
Cab rear to f/axle (sleeper cab) – 870 870 870 870 – 870 870 870 870
J Overall height (unladen) 2545 2545 2545 2545 2545 2551 2551 2551 2551 2551
K Ground clearance front 195 195 195 195 195 195 195 195 195 195
L Width over cab 2311 2311 2311 2311 2311 2311 2311 2311 2311 2311
M Ground clearance rear 183 183 183 183 183 183 183 183 183 183
N Frame width 850 850 850 850 852 850 850 850 850 852
Turning circle (wall to wall) m 12.3 13.2 14.1 16.0 17.8 12.3 13.2 14.1 16.0 17.8
Minimum cab gap: Day Cab = 100 mm, Sleeper Cab = 80 mm
Weights (kg)
918 918 918 918 918 1018 1018 1018 1018 1018
Wheelbase 3020 3320 3620 4220 4820 3020 3320 3620 4220 4820
Plated Weights
GVW 9500 9500 9500 9500 9500 10500 10500 10500 10500 10500
GTW (overun brakes) 13000 13000 13000 13000 13000 14000 14000 14000 14000 14000
GTW (full airbrakes) 21000 21000 21000 21000 21000 21000 21000 21000 21000 21000
Front axle 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000
Rear axle 6200 6200 6200 6200 6200 7000 7000 7000 7000 7000
Kerb Weights (Steel Suspension)
Front axle 2460 2460 2470 2480 2490 2470 2470 2480 2480 2500
Rear axle 1000 1010 1050 1080 1160 1030 1040 1080 1120 1180
Total 3460 3470 3520 3560 3650 3500 3510 3560 3600 3680
Body/Payload 6040 6030 5980 5940 5850 7000 6990 6940 6900 6820
Weights and dimensions are to standard specification with 20 litres of fuel, oil, water, tools, rear underride guard, chassis side
210022