Proto J07500P Catalog

IMPACT SOCKETS AND ACCESSORIES
Anyone who uses an impact wrench will need an impact socket. As cars, trucks, aircraft, and other machines become more
Proto® has created a line of impact sockets that's broad enough complex, and their engineers cram more and more parts into the
to satisfy any user, from those doing small precision assemblies, given space, the fasteners become harder and harder to reach.
to the people who maintain the heavy equipment used in the oil, One of Stanley Proto's responses has been an expanded line of
gas, mining, and utility industries. Deep Thin Wall Impact Sockets. These are 2-1/2 to 3-in. long with
thinner walls, which means they can be slipped into awkward
Our sockets' drive sizes range from 1/4 to 2-1/2 in., with openings or tight spaces. This feature makes them ideal for hard-to-reach
from 3/16 in. to 8 in. while metric sizes are available from 4 mm fasteners that require low impact force.
to 65 mm. Proto also offers several different drive styles from
4, 6, 8, or 12 point, standard length or deep, to surface drive All Proto® impact sockets incorporate the TorquePlus™ wrenching
and magnetic. system. The TorquePlus™ design is a high performance drive
configuration which allows for quick and easy socket engagement
Our most innovative new sockets were designed for automated to the fastener flats, not the corners. The configuration employs
assembly plants, and for workers that need to squeeze their tools a radius-corner design, shifting contact area and stresses over a
into tight spaces. For instance, automated assembly plants will large area of the socket, minimizing slippage. The internal design
benefit from the unique "no-bushing" design we developed for of the TorquePlus™ minimizes fastener rounding, helps to extend
the ProtoGrip™ Magnetic Socket. In the past, magnetic sockets fastener life, and allows the user to more easily turn worn,
used a bushing to hold the magnet in place, but by eliminating rounded, or rusted fasteners.
this bushing the ProtoGrip™ Magnetic Socket leaves room for
more magnetic material, which of course means more magnetic All Proto® impact sockets are made from special alloy steel,
strength. The magnetic material has also been upgraded to a and are heat treated for the correct balance of strength and
rare earth/nylon blend. The added strength helps reduce or hardness, while the one-piece construction ensures their
eliminate the possibility that the magnet will become separated concentricity. Socket wall thickness is optimized to provide
from the socket during automated assembly operations, even maximum strength and ample access to restricted fasteners.
when lifting heavy bolts or fasteners. Sockets are manufactured to the most up to date industrial
specifications, assuring concentric openings, large clearance
Over the years, access has become a growing challenge. holes, and tight nut end tolerance.
529
P R O D U C T F E AT U R E S A N D B E N E F I T S
IMPACT SOCKETS DEEP THIN WALL IMPACT SOCKETS
• Impact sockets are manufactured from special alloy steel • Available in a variety of metric sizes for 3/8 inch drives.
for strength and durability.
• 2 to 3.5-inches length and reduced thickness make them
• Impact sockets are heat treated for the correct balance ideal for hard-to-reach fasteners that require low
of strength and hardness. impact force.
• Socket wall thickness is optimized to provide the • Chamfered service ends provide quick and solid
required strength while retaining ample access to fastener engagement.
restricted fasteners.
• Sockets feature TORQUEPLUS™ design.
• Thin wall sockets are available for special tight
clearance applications.
• The depth of the socket opening is designed to fully engage

all standard fasteners for more secure operation.
• All impact sockets feature two through holes, a groove to

accept a retaining ring and pin to secure the socket to the
power tool anvil.
• All Proto® impact sockets feature chamfered service ends

for quick and positive fastener engagement.
• Patented impact universal joints and sockets last long and

provide outstanding power.
• One piece construction ensures concentricity.

PROTOGRIP™ MAGNETIC SOCKETS
• Special heat treatment ensures long life.
• Precision machined tips for proper fastener equipment. • Designed primarily for automated assembly operations,
where the socket is attached to a robotic drive tool.
• Unique no-bushing design boosts magnetic strength by

increasing the space available for magnetic material.
• Magnetic material has been upgraded to a rare earth/nylon

blend for extra magnetic strength.
• Available in both power and impact configurations.

RETAINING RINGS WITH CRUSH GAUGE
• When fit between tool and socket isn't tight, their index
holes will misalign, pinching or crushing the crush gauge
at the end of the pin. This warns the user that the socket
or anvil is in the process of breaking, and needs to
be replaced.
• Ring is made from a resin material rather than steel,

which bends rather than breaking under pressure.
BITS
• Proto® bits and accessories are offered in a broad range to

accommodate virtually all production assembly applications.
• Proto® offers a wide range of insert bits, power bits, bit

holders, extensions, and nut setters.
• These are manufactured in a variety of sizes and styles to

provide access as well as the designs necessary to drive
different screw recesses.
• A wide variety of bits are available including Phillips®,

slotted Torx®, socket head, square recess, clutch,
and Pozidriv® in lengths ranging from 1 in. to 6 in.
• Bit holders, nut setters, and extensions are also available

to meet production needs.
Phillips and Pozidrivare trademarks of Phillips Screw Company

Torx is a trademark of Acument Intellectual Properties, LLC
SAFETY TIPS
• Use safety goggles. Serious eye injury is possible. • Do not continue to hammer with an impact tool when the
fastener is tight.
• Do not hold socket, universal joint, or any other attachment
while power tool is running. • Do not use hand sockets with power tools.
• Do not use damaged socket. Replace. • Do not use power sockets with impact tools.
SET NO. J69106 - 1/4" DRIVE 11 PC. SOCKET SET - 6 POINT
• Proto® 6 Point Impact Sockets are ideal for use on

stubborn or damaged fasteners, and also on fasteners
made from soft materials.
• The TorquePlus™ design is a high performance drive
configuration which allows for quick and easy socket
engagement to the fastener flats, not the corners.
• The TorquePlus™ configuration employs a radius-corner
design, shifting contact area and stress away from the
fastener corners and distributing contact stresses over
a large area of the socket, minimizing slippage.
• The TorquePlus™ internal design minimizes fastener
rounding, helps to extend fastener life, and allows the
user to more easily turn worn, rounded, or rusted fasteners.
• Weight: .66 lbs.
Product ASME
ID No. Contents Description Spec.
J69106 J6906H Socket Impact 1/4" Dr. 3/16" 6 Pt. ASME B107.2
J6907H Socket Impact 1/4" Dr. 7/32" 6 Pt. ASME B107.2
J2585 Socket Bar 9"
J2590 Socket Clips
532 WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.


Product ASME
J69102 J6908H Socket Impact 1/4" Dr. 1/4" 6 Pt. ASME B107.2
J2584 Socket Bar 6-1/4"
J2590 Socket Clips
Toll Free Customer Service Number: 1-800-800-TOOL

Customer Service FAX Number: 1-770-648-9108 Visit us at...www.stanleyproto.com 533
SET NO. J69206 - 1/4" DRIVE 13 PC. METRIC SOCKET SET - 6 POINT

Product ASME
J69206 J6904M Socket Impact 1/4" Dr. 4 mm 6 Pt. ASME B107.33M
J6905M Socket Impact 1/4" Dr. 5 mm 6 Pt. ASME B107.33M
J69055M Socket Impact 1/4" Dr. 5.5 mm 6 Pt. ASME B107.33M
J2588 Socket Bar 11"
J2590 Socket Clips


Product ASME
J2590 Socket Clips

SET NO. J69116 - 1/4" DRIVE 11 PC. DEEP SOCKET SET - 6 POINT

• Weight: 1.31 lbs.
Product ASME
J69116 J6506H Socket Impact 1/4" Dr. 3/16" 6 Pt. Deep ASME B107.2
J6507H Socket Impact 1/4" Dr. 7/32" 6 Pt. Deep ASME B107.2
J2585 Socket Bar 9"
J2590 Socket Clips

SET NO. J69212 - 1/4" DRIVE 11 PC. METRIC DEEP SOCKET SET - 6 POINT

Product ASME
J69212 J6505MH Socket Impact 1/4" Dr. 5 mm 6 Pt. Deep ASME B107.33M
J6506MH Socket Impact 1/4" Dr. 6 mm 6 Pt. Deep ASME B107.33M
J2585 Socket Bar 9"
J2590 Socket Clips


Product ASME
J2590 Socket Clips
SET NO. J69132 - 1/4" DRIVE 7 PC. TORX ® SOCKET SET

Product
ID No. Contents Description
J69132 J6904TX E4 Torx® Socket
J6905TX E5 Torx® Socket
J2590 Socket Clips

1/4" DRIVE STANDARD LENGTH SOCKETS - 6 POINT
• Proto® 6 Point Impact Sockets are ideal for use on stubborn or

damaged fasteners, and also on fasteners made from soft materials.
• The TorquePlus™ design is a high performance drive configuration
which allows for quick and easy socket engagement to the
fastener flats, not the corners.
rounding, helps to extend fastener life, and allows the user
to more easily turn worn, rounded, or rusted fasteners.
Product Weight ASME

in.
ID No. B (P) C D (W) E L lbs. Spec.
J6906H 3/16" 5/16" 1/2" 11/64" 1/2" 7/8" .02 ASME B107.2
J6907H 7/32" 11/32" 1/2" 13/64" 1/2" 7/8" .02 ASME B107.2
J6908H 1/4" 25/64" 1/2" 7/32" 1/2" 7/8" .02 ASME B107.2
J6909H 9/32" 7/16" 1/2" 15/64" 1/2" 7/8" .03 ASME B107.2
J6910H 5/16" 1/2" 1/2" 15/64" 1/2" 7/8" .03 ASME B107.2
J6911H 11/32" 33/64" 33/64" 17/64" 1/2" 7/8" .03 ASME B107.2
J6912H 3/8" 9/16" 9/16" 17/64" 1/2" 7/8" .04 ASME B107.2
J6914H 7/16" 21/32" 21/32" 5/16" 1/2" 7/8" .04 ASME B107.2
J6916H 1/2" 45/64" 11/16" 3/8" 1/2" 7/8" .05 ASME B107.2
J6918H 9/16" 51/64" 51/64" 3/8" 1/2" 7/8" .06 ASME B107.2
J6920H 5/8" 7/8" 7/8" 3/8" 1/2" 7/8" .06 ASME B107.2
1/4" DRIVE METRIC STANDARD LENGTH SOCKETS - 6 POINT
Product mm
Weight ASME
ID No. B C D E L lbs. Spec.
J6904M 4 6.7 12.6 4.0 12.7 22.2 .02 ASME B107.33M
J6905M 5 7.9 12.6 4.7 12.7 22.2 .02 ASME B107.33M
J69055M 5.5 8.9 12.6 4.7 12.7 22.2 .02 ASME B107.33M
J6906M 6 10.0 12.6 5.5 12.7 22.2 .02 ASME B107.33M
J6907M 7 11.0 12.6 5.5 12.7 22.2 .02 ASME B107.33M
J6908M 8 12.6 12.6 5.5 12.7 22.2 .02 ASME B107.33M
J6909M 9 13.1 13.1 6.4 12.7 22.2 .03 ASME B107.33M
J6910M 10 14.1 14.1 6.4 12.7 22.2 .04 ASME B107.33M
J6911M 11 16.5 16.5 7.1 12.7 22.2 .05 ASME B107.33M
J6912M 12 17.3 17.3 7.5 12.7 22.2 .06 ASME B107.33M
J6913M 13 18.4 18.4 7.9 12.7 22.2 .07 ASME B107.33M
J6914M 14 20.3 20.3 9.5 12.7 22.2 .08 ASME B107.33M
J6915M 15 21.1 21.1 9.5 12.7 22.2 .08 ASME B107.33M

1/4" DRIVE PROTOGRIP ™ HIGH STRENGTH MAGNETIC POWER SOCKET - 6 POINT
• ProtoGrip™ Magnetic Sockets use high strength magnets

made from a rare earth magnet alloy/nylon blend.
• ProtoGrip™ Magnetic Sockets require no bushings to hold
the magnet in place. Allows room for more magnet material,
helping increase total magnetic strength.
• Designed to easily pick up heavy fasteners and hold them
tightly during use.
• Strong magnetic hold helps increase efficiency when
installing fasteners in awkward or hard-to-reach locations.
• Impact sockets with high impact strength are used in
automated and hand impact socket application
Product in. Weight ASME
ID No. B C D L lbs. Spec.
J6906PF 3/16" 5/16" 1/2" 5/32" 7/8" .02 lbs. ASME B107.2
J6908PF 1/4" 25/64" 1/2" 11/64" 7/8" .02 lbs. ASME B107.2
J6910PF 5/16" 1/2" 1/2" 13/64" 15/16" .03 lbs. ASME B107.2
J6911PF 11/32" 33/64" 33/64" 7/32" 15/16" .03 lbs. ASME B107.2
J6912PF 3/8" 9/16" 9/16" 15/64" 15/16" .04 lbs. ASME B107.2
J6914PF 7/16" 21/32" 21/32" 1/4" 1" .04 lbs. ASME B107.2
J6916PF 1/2" 11/16" 11/16" 1/4" 1" .05 lbs. ASME B107.2
1/4" DRIVE METRIC PROTOGRIP ™ HIGH STRENGTH MAGNETIC POWER SOCKET - 6 POINT

tightly during use.
• Impact Sockets with high Impact strength are used in
automated and hand socket applications
Product mm
Weight ASME
J6905MPF 5 mm 7.9 mm 12.7 mm 4 mm 22.2 mm 0.02 lbs. ASME B107.33
J69055MPF 5.5 mm 9.1 mm 12.7 mm 4 mm 22.2 mm 0.02 lbs. ASME B107.33
J6906MPF 6 mm 9.9 mm 12.7 mm 4.4 mm 22.2 mm 0.02 lbs. ASME B107.33

1/4" DRIVE PROTOGRIP ™ HIGH STRENGTH MAGNETIC IMPACT SOCKET - 6 POINT

tightly during use.
automated and hand impact socket applications.
Product Weight ASME

in.
J6906HF 3/16" 5/16" 1/2" 5/32" 7/8" 0.02 ASME B107.2
J6908HF 1/4" 25/64" 1/2" 11/64" 7/8" 0.02 ASME B107.2
J6910HF 5/16" 1/2" 1/2" 13/64" 59/64" 0.04 ASME B107.2
J6912HF 3/8" 9/16" 9/16" 15/64" 15/16" 0.04 ASME B107.2
J6914HF 7/16" 21/32" 21/32" 1/4" 1" 0.04 ASME B107.2
J6916HF 1/2" 11/16" 11/16" 1/4" 1" 0.05 ASME B107.2
1/4" DRIVE PROTOGRIP ™ METRIC HIGH STRENGTH MAGNETIC IMPACT SOCKET - 6 POINT

tightly during use.
Product mm Weight
ID No. B C D L lbs. ASME Spec.
J6905MHF 5 7.9 12.7 1.6 22.2 0.02 ASME B107.33
J69055MHF 5.5 9.1 12.7 2.2 22.2 0.02 ASME B107.33
J6906MHF 6 9.9 12.7 2.6 22.2 0.02 ASME B107.33
J6907MHF 7 9.9 12.7 2.7 23.8 0.02 ASME B107.33
J6908MHF 8 12.7 12.7 3.2 23.8 0.02 ASME B107.33
J6910MHF 10 14.3 14.3 4.1 23.8 0.04 ASME B107.33

1/4" DRIVE TORX ® SOCKETS
• For use with Torx® style fasteners.

Product Weight
ID No. B C D L lbs.
J6904TX E4 1/4" 7/16" 13/64" 1" 0.02 lbs.
J6905TX E5 1/4" 7/16" 7/32" 1" 0.02 lbs
J6906TX E6 5/16" 7/16" 15/64" 1" 0.02 lbs.
J6907TX E7 21/64" 1/2" 9/32" 1" 0.02 lbs.
J6908TX E8 3/8" 19/64" 19/64" 1" 0.02 lbs.
J6910TX E10 1/2" 1/2" 11/32" 1" 0.05 lbs.
J6912TX E12 9/16" 9/16" 25/64" 1" 0.05 lbs.
1/4" DRIVE DEEP LENGTH SOCKETS - 6 POINTS

Product Weight ASME

in.
J6506H 3/16" 5/16" 1/2" 1/4" 1-5/8" 2" 0.04 lbs. ASME B107.2
J6507H 7/32" 23/64" 1/2" 7/64" 1-5/8" 2" 0.04 lbs. ASME B107.2
J6508H 1/4" 25/64" 1/2" 9/32" 1-5/8" 2" 0.04 lbs. ASME B107.2
J6509H 9/32" 7/16" 1/2" 19/64" 1-5/8" 2" 0.06 lbs. ASME B107.2
J6510H 5/16" 1/2" 1/2" 5/16" 1-5/8" 2" 0.06 lbs. ASME B107.2
J6511H 11/32" 33/64" 33/64" 11/32" 1-5/8" 2" 0.06 lbs. ASME B107.2
J6512H 3/8" 9/16" 9/16" 3/8" 1-5/8" 2" 0.08 lbs. ASME B107.2
J6514H 7/16" 21/32" 21/32" 3/8" 1-5/8" 2" 0.08 lbs. ASME B107.2
J6516H 1/2" 11/16" 11/16" 7/16" 1-5/8" 2" 0.10 lbs. ASME B107.2
J6518H 9/16" 51/64" 51/64" 7/16" 1-5/8" 2" 0.12 lbs. ASME B107.2
J6520H 5/8" 7/8" 7/8" 7/16" 1-5/8" 2" 0.12 lbs. ASME B107.2


Product mm
Weight ASME
J6505MH 5 7.9 12.6 6.4 41.3 50.8 .04 ASME B107.33M
J65055MH 5.5 9 12.6 6.7 41.3 50.8 .04 ASME B107.33M
J6506MH 6 10 12.6 7.1 41.3 50.8 .04 ASME B107.33M
J6507MH 7 11.0 12.6 7,5 41.3 50.8 .04 ASME B107.33M
J6508MH 8 12.6 12.6 7.9 41.3 50.8 .06 ASME B107.33M
J6509MH 9 13.1 13.1 7.9 41.3 50.8 .06 ASME B107.33M
J6510MH 10 14.1 14.1 9.5 41.3 50.8 .07 ASME B107.33M
J6511MH 11 16.5 16.5 9.5 41.3 50.8 .09 ASME B107.33M
J6512MH 12 17.3 17.3 10.3 41.3 50.8 .11 ASME B107.33M
J6513MH 13 18.4 18.4 11.1 41.3 50.8 .15 ASME B107.33M
J6514MH 14 20.3 20.3 11.1 41.3 50.8 .17 ASME B107.33M
J6515MH 15 21.1 21.1 11.1 41.3 50.8 .19 ASME B107.33M


Product ASME
J72106 J7208H Socket, Impact 3/8" Dr. 1/4" 6 Pt. ASME B107.2
J7209H Socket, Impact 3/8" Dr. 9/32" 6 Pt. ASME B107.2
J7232H Socket, Impact 3/8" Dr. 1" 6 Pt. ASME B107.2
J2591 Socket Clips


Product ASME
J2585 Socket Bar 9"
J2591 Socket Clips


alarge area of the socket, minimizing slippage.
userto more easily turn worn, rounded, or rusted fasteners.
Product ASME
J2591 Socket Clips


Product ASME
J2585 Socket Bar 9"
J2591 Socket Clips


Product ASME
J72216 J7006M Socket Impact 3/8" Dr. 6 mm 6 Pt. Deep ASME B107.33M
J7007M Socket Impact 3/8" Dr. 7 mm 6 Pt. Deep ASME B107.33M
J2591 Socket Clips


Product ASME
J7711H Socket Impact 3/8 Dr. 11/32" 6 Pt. Deep ASME B107.2
J7726H Socket Impact 3/8" Dr. 13/16" 6 pt. Deep ASME B107.2
J7728H Socket Impact 3/8" Dr. 7/8" 6 pt. Deep ASME B107.2
J7730H Socket Impact 3/8" Dr 15/16" 6 pt. Deep ASME B107.2
J7732H Socket Impact 3/8" Dr. 1" 6 pt. Deep ASME B107.2
J2591 Socket Clips


which allows for quick and easy socket engagement to the fastener
flats, not the corners.
• The TorquePlus™ configuration employs a radius-corner design,
shifting contact area and stress away from the fastener corners and
distributing contact stresses over a large area of the socket,
minimizing slippage.
• The TorquePlus™ internal design minimizes fastener rounding, helps
to extend fastener life, and allows the user to more easily turn worn,
rounded, or rusted fasteners.
Product ASME
J72212 J7007M Socket Impact 3/8" Dr. 7 mm 6 Pt. Deep ASME B107.33M
J2585 Socket Bar 9"
J2591 Socket Clips


Product ASME
J2585 Socket Bar 9"
J2591 Socket Clips

SET NO. J72117 - 3/8" DRIVE 9 PC. THIN WALL DEEP IMPACT SOCKET SET - 6 POINT
• Specifically designed for light clearance applications.

• Reduced wall thickness helps improve access to fasteners
in restricted areas.
• All Impact sockets feature one through hole and a groove to accept
a retaining ring and pin to secure the socket to the power tool anvil.
• Chamfered service ends for quick and positive fastener engagement.
• Thin wall sockets are lightweight.
• Designed to fit into smaller spaces.
• Thinner walls help improve productivity by making it easier
to gain access to fasteners in confined spaces.
• Extra deep length helps improve access in confined areas.
• Often used in application where fasteners are close together,
such as tire service.
Product
ID No. Contents Description ASME Spec.
J72117 J7708HT Socket Impact Deep Thin Wall 3/8" Dr. 1/4" ASME B107.2
J7710HT Socket Impact Deep Thin Wall 3/8" Dr. 5/16" ASME B107.2

SET NO. J72217 - 3/8" DRIVE 12 PC. METRIC THIN WALL DEEP IMPACT SOCKET SET - 6 POINT

• Reduced wall thickness helps improve access to fasteners
in restricted areas.
• Designed to fit into smaller spaces.
• Thinner walls help improve productivity by making it easier to gain
access to fasteners in confined spaces.
• Often used in application where fasteners are close together, such
as tire service.
Product
J72217 J7008MHT 3/8" Dr. Deep Thin Wall Impact Socket 8 mm
J7009MHT 3/8" Dr. Deep Thin Wall Impact Socket 9 mm

SET NO. J72142 - 5 PC. IMPACT UNIVERSAL SOCKET SET - 6 POINT
• Proto® 6 Point Impact Sockets are ideal for use on stubborn or damaged
fasteners, and also on fasteners made from soft materials.
• The TorquePlus™ design is a high performance drive configuration which
allows for quick and easy socket engagement to the fastener flats, not
the corners.
• The TorquePlus™ configuration employs a radius-corner design, shifting
contact area and stress away from the fastener corners and distributing
contact stresses over a large area of the socket, minimizing slippage.
• The TorquePlus™ internal design minimizes fastener rounding, helps to
extend fastener life, and allows the user to more easily turn worn,
Product
ID No. Contents Description ASME
J72142 J7273P Socket Impact Universal 3/8" Dr. 3/8" 6 Pt. ASME B107.2
J7274P Socket Impact Universal 3/8" Dr. 7/16" 6 Pt. ASME B107.2
J2591 Socket Clips
SET NO. J72132 - 3/8” DRIVE 7 PC. TORX ® IMPACT SOCKET SET
• Proto® Torx® Impact Sockets can be used on

stubborn Torx® fasteners.
• Tight tolerances for snug fit on fastener.
• Torx® impact sockets are used wherever powered
drive tools are used to install or remove fasteners.
• Torx® impact sockets are designed to withstand the
high torque and force associated with impact tools
in repetitive application.
Product
J2591 Socket Clips

SET NO. J74132 - 1/2" DRIVE 4 PC. TORX ® SOCKET SET

Product
J2592 Socket Clips
SET NO. J72156 - 10 PC. HEX BIT SOCKET SET - 3/8" AND 1/2" DRIVE
• Drive end chamfer and four detents help provide quick

positive engagement with drive tool on any of the socket
drive walls.
• Large clearance holes, concentric opening and nut end
chamfer make it esy to position socket on fasteners.
• Made from high strength steel to help minimize wall
thickness and provide access to fasteners in recesses and
where nuts and bolts protrude.
• Impact sockets are used wherever powered drive tools are
used to install or remove fasteners.
• Impact sockets are designed to withstand higher torque and
force associated with impact tools in repetitive application.
Product
J72156 J7290 1/8 Socket Impact Hex Bit 3/8" Dr. 1/8"
J7290 5/32 Socket Impact Hex Bit 3/8" Dr. 5/32"
J7441 1/2 Socket, Impact Hex Bit 1/2" Dr. 1/2"
J4968PB Blow Molded Box

SET NO. J72152 - 3/8" DRIVE 7 PC. HEX BIT SOCKET SET
• Proto® Hex Bit Impact Sockets can be used on stubborn fasteners.

• Hex bit impact sockets are used wherever powered drive tools are
• Hex bit impact sockets are designed to withstand the high torque
and force associated with impact tools in repetitive application.
Product
J2585 Socket Bar 9"
J2591 Socket Clips
SET NO. J72252 - 3/8" DRIVE 5 PC. METRIC HEX BIT IMPACT SOCKET SET
• Proto® Hex Bit Impact Sockets can be used on stubborn fasteners.

• Hex bit impact sockets are used wherever powered drive tools are
• Hex bit impact sockets are designed to withstand the high torque
and force associated with impact tools in repetitive application.
Product
J72252 J7290-4M Socket Impact Hex Bit 3/8" Dr. 4 mm
J7290-5M Socket Impact Hex Bit 3/8" Dr. 5 mm
J2591 Socket Clips

SET NO. J4739P - 7 PC. 3/8" DRIVE TORX ® BIT SET
• Not for use on impact applications.

• 3/8" Dr., 5/16" Hex
Product
ID No. Contents
J4739P J60508 T10
J60510 T15
J60512 T20
J60514 T25
J60516 T27
J60518 T30
J6931 Bit Holder
J25TR50C Pouch
SET NO. J7099A - 3/8" DRIVE 13 PC. HAND IMPACT DRIVER SET
• Designed to loosen hard to turn bolts and nuts.

• Hand impact driver has heavy-duty spring for added torque.
• Popular interchangeable bits are packaged in plastic blow
molded box for easy storage.
Product
ID No. Contents Description Length
J7099A J7099 Driver Hand Impact 3/8" Dr. 5-1/2"
J60002 Bit Insert 1 Phillips® 1/4" Hex 1"
J60202 Bit Insert 4F-5R Slot 1/4" Hex 1"
J60208 Bit Insert 10F-12R Slot 1/4" Hex 1"
J60050 Bit Insert 1 Phillips® 5/16" Hex 1-1/4"
J60256 Bit Insert 10F-12R Slot 5/16" Hex 1-1/2"
J60262 Bit Insert 14F-16R Slot 5/16" Hex 1-1/2"
J6930 Bit, Holder Power 3/8" Dr. 5/16" Hex 1-5/16"
J6931 Bit, Holder Power 3/8" Dr. 1/4" Hex 1-1/4"

Phillips is a trademark of Phillips Screw Company



J7208H 1/4" 7/16" 11/16" 9/32" 19/32" 1-3/32" 0.07 lbs. ASME B107.2
J7209H 9/32" 31/64" 11/16" 5/16" 19/32" 1-3/32" 0.07 lbs. ASME B107.2
J7210H 5/16" 1/2" 11/16" 5/16" 19/32" 1-3/32" 0.07 lbs. ASME B107.2
J7211H 11/32" 35/64" 11/16" 3/8" 19/32" 1-3/32" 0.07 lbs. ASME B107.2
J7212H 3/8" 19/32" 11/16" 3/8" 19/32" 1-3/32" 0.07 lbs. ASME B107.2
J7214H 7/16" 11/16" 11/16" 3/8" 19/32" 1-3/32" 0.07 lbs. ASME B107.2
J7216H 1/2" 3/4" 3/4" 3/8" 19/32" 1-3/32" 0.08 lbs. ASME B107.2
J7218H 9/16" 13/16" 13/16" 9/16" 19/32" 1-3/32" 0.10 lbs. ASME B107.2
J7220H 5/8" 29/32" 29/32" 9/16" 19/32" 1-3/32" 0.12 lbs. ASME B107.2
J7222H 11/16" 1" 1" 9/16" 19/32" 1-3/32" 0.15 lbs. ASME B107.2
J7224H 3/4" 1-1/16" 1-1/16" 17/32" 19/32" 1-3/32" 0.16 lbs. ASME B107.2
J7226H 13/16" 1-3/16" 1-13/64" 11/16" 23/32" 1-7/32" 0.24 lbs. ASME B107.2
J7228H 7/8" 1-9/32" 1-9/32" 11/16" 23/32" 1-7/32" 0.26 lbs. ASME B107.2
J7230H 15/16" 1-23/64" 1-23/64" 51/64" 27/32" 1-11/32" 0.35 lbs. ASME B107.2
J7232H 1" 1-1/2" 1-1/2" 51/64" 27/32" 1-11/32" 0.42 lbs. ASME B107.2


Product mm Weight ASME

J7206M 6 10.7 17.3 5.5 10.7 23.4 0.06 lbs. ASME B107.33M
J7207M 7 12.2 17.3 6.0 10.7 23.4 0.06 lbs. ASME B107.33M
J7208M 8 13.0 17.3 7.9 13.5 26.2 0.06 lbs. ASME B107.33M
J7209M 9 14.7 17.3 8.7 13.5 26.2 0.06 lbs. ASME B107.33M
J7210M 10 17.3 17.3 9.5 13.5 26.2 0.07 lbs. ASME B107.33M
J7211M 11 17.3 17.3 10.3 13.5 26.2 0.06 lbs. ASME B107.33M
J7212M 12 18.2 18.2 11.1 13.5 26.2 0.07 lbs. ASME B107.33M
J7213M 13 19.1 19.1 11.1 13.5 27.8 0.08 lbs. ASME B107.33M
J7214M 14 20.5 20.5 14.2 15.1 27.8 0.09 lbs. ASME B107.33M
J7215M 15 21.8 21.8 14.2 15.1 27.8 0.10 lbs. ASME B107.33M
J7216M 16 23.0 23.0 14.2 15.1 27.8 0.12 lbs. ASME B107.33M
J7217M 17 25.4 25.4 14.2 15.1 27.8 0.15 lbs. ASME B107.33M
J7218M 18 26.2 26.2 14.2 15.1 27.8 0.16 lbs. ASME B107.33M
J7219M 19 26.8 26.8 13.4 15.1 27.8 0.15 lbs. ASME B107.33M
J7220M 20 28.2 28.2 13.4 15.1 27.8 0.18 lbs. ASME B107.33M
J7221M 21 29.4 29.4 13.4 15.1 27.8 0.19 lbs. ASME B107.33M
J7222M 22 30.5 30.5 13.4 15.1 27.8 0.20 lbs. ASME B107.33M
J7223M 23 31.8 31.8 13.4 15.1 27.8 0.26 lbs. ASME B107.33M
J7224M 24 33.0 33.0 13.4 15.1 27.8 0.27 lbs. ASME B107.33M


shifting contact area and stress away from the fastener corners
and distributing contact stresses over a large area of the socket,
• Drive end chamfer and four detents help provide quick positive
engagement with drive tool on any of the socket drive walls.
• Large clearance holes, concentric opening and nut end chamfer
make it esy to position socket on fasteners.
• Made from high strength steel to help minimize wall thickness
and provide access to fasteners in recesses and where nuts
and bolts protrude.
• Impact sockets are used wherever powered drive tools are used
to install or remove fasteners.
• Impact sockets are designed to withstand higher torque and force
associated with impact tools in repetitive application.

J7208S 1/4" 31/64" 11/16" 1/4" 1/2" 1" .07 ASME B107.2
J7210S 5/16" 5/8" 11/16" 9/32" 1/2" 1" .07 ASME B107.2
J7212S 3/8" 11/16" 11/16" 5/16" 1/2" 1" .06 ASME B107.2
J7214S 7/16" 13/16" 13/16" 21/64" 1/2" 1" .10 ASME B107.2
J7216S 1/2" 59/64" 15/16" 3/8" 9/16" 1-1/16" .13 ASME B107.2
J7218S 9/16" 1-3/32" 1-3/16" 9/16" 5/8" 1-1/8" .17 ASME B107.2


• ProtoGrip™ Magnetic Sockets require no bushings to hold the
magnet in place. This allows room for more magnet material,
tightly during use.

J7210PF 5/16" 1/2" 11/16" 3/16" 1-3/32" 0.8 lbs. ASME B107.2
J7212PF 3/8" 39/64" 11/16" 15/64" 1-3/32" 0.9 lbs. ASME B107.2
J7214PF 7/16" 11/16" 11/16" 1/4" 1-3/16" .09 lbs. ASME B107.2
J7216PF 1/2" 3/4" 3/4" 9/32" 1-3/16" .10 lbs. ASME B107.2
J7218PF 9/16" 13/16" 13/16" 21/64" 1-3/16" .11 lbs. ASME B107.2
3/8" DRIVE METRIC PROTOGRIP ™ HIGH STRENGTH MAGNETIC POWER SOCKET - 6 POINT

tightly during use.
• Impacts with high impact strength are used in automated and
hand impact socket applications.
J7207MPF 7mm 12.3mm 17.5mm 4.4mm 27.8mm .06 lbs. ASME B107.33M


tightly during use.
J7208HF 1/4" 7/16" 11/16" 11/64" 1-3/32" 0.06 ASME B107.33M
J7210HF 5/16" 1/2" 11/16" 3/16" 1-3/32" 0.06 ASME B107.33M
J7212HF 3/8" 39/64" 11/16" 15/64" 1-3/32" 0.06 ASME B107.33M
J7214HF 7/16" 11/16" 11/16" 1/4" 1-3/32" 0.06 ASME B107.33M
J7216HF 1/2" 3/4" 3/4" 9/32" 1-3/32" 0.08 ASME B107.33M
J7218HF 9/16" 13/16" 13/16" 21/64" 1-3/32" 0.08 ASME B107.33M
J7220HF 5/8" 29/32" 29/32" 23/64" 1-7/32" 0.11 ASME B107.33M
3/8" DRIVE METRIC PROTOGRIP ™ HIGH STRENGTH MAGNETIC IMPACT SOCKET - 6 POINT

tightly during use.
J7207MHF 7 12.3 17.5 4.4 27.8 0.08 lbs. ASME B107.33
J7208MHF 8 12.7 17.5 4.4 27.8 0.08 lbs. ASME B107.33
J7210MHF 10 15.9 17.5 5.6 29 0.08 lbs. ASME B107.33
J7211MHF 11 17.5 17.5 6.7 29 0.08 lbs. ASME B107.33
J7212MHF 12 18.7 18.7 7.1 29 0.09 lbs. ASME B107.33
J7213MHF 13 19.1 19.1 7.5 30.6 0.10 lbs. ASME B107.33
J7214MHF 14 20.6 20.6 8.3 30.6 0.12 lbs. ASME B107.33
J7215MHF 15 21.8 21.8 8.3 30.6 0.14 lbs. ASME B107.33
J7217MHF 17 25.4 25.4 9.9 31.8 0.20 lbs. ASME B107.33
J7218MHF 18 26.2 26.2 9.9 31.8 0.21 lbs. ASME B107.33

3/8" DRIVE DEEP LENGTH SOCKETS - 6 POINT


J7708H 1/4" 7/16" 11/16" 9/32" 2-1/4" 2-3/4" 0.11 lbs. ASME B107.2
J7709H 9/32" 31/64" 11/16" 5/16" 2-1/4" 2-3/4" 0.12 lbs. ASME B107.2
J7710H 5/16" 33/64" 11/16" 21/64" 2-1/4" 2-3/4" 0.13 lbs. ASME B107.2
J7711H 11/32" 35/64" 11/16" 11/32" 2-1/4" 2-3/4" 0.13 lbs. ASME B107.2
J7712H 3/8" 19/32" 11/16" 3/8" 2-1/4" 2-3/4" 0.14 lbs. ASME B107.2
J7714H 7/16" 11/16" 11/16" 27/64" 2-1/4" 2-3/4" 0.15 lbs. ASME B107.2
J7716H 1/2" 3/4" 3/4" 15/32" 2-1/4" 2-3/4" 0.18 lbs. ASME B107.2
J7718H 9/16" 13/16" 13/16" 11/16" 2-1/4" 2-3/4" 0.20 lbs. ASME B107.2
J7720H 5/8" 29/32" 29/32" 11/16" 2-1/4" 2-3/4" 0.29 lbs. ASME B107.2
J7722H 11/16" 1" 1" 11/16" 2-1/4" 2-3/4" 0.33 lbs. ASME B107.2
J7724H 3/4" 1-1/16" 1-1/16" 43/64" 2-1/4" 2-3/4" 0.35 lbs. ASME B107.2
J7726H 13/16" 1-13/64" 1-13/64" 13/16" 2-1/8" 2-3/4" 0.35 lbs. ASME B107.2
J7728H 7/8" 1-9/32" 1-9/32" 13/16" 2-1/8" 2-3/4" 0.39 lbs. ASME B107.2
J7730H 15/16" 1-23/64" 1-23/64" 13/16" 2-1/8" 2-3/4" 0.50 lbs. ASME B107.2
J7732H 1" 1-1/2" 1-1/2" 13/16" 2-1/8" 2-3/4" 0.59 lbs. ASME B107.2

3/8" DRIVE METRIC DEEP LENGTH SOCKETS - 6 POINT


J7006M 6 10.7 17.3 7.1 57.2 69.9 0.19 lbs. ASME B107.33M
J7007M 7 12.2 17.3 8.0 57.2 69.9 0.20 lbs. ASME B107.33M
J7008M 8 13.0 17.3 8.0 57.2 69.9 0.19 lbs. ASME B107.33M
J7009M 9 14.7 17.3 9.5 57.2 69.9 0.20 lbs. ASME B107.33M
J7010M 10 15.7 17.3 9.5 57.2 69.9 0.19 lbs. ASME B107.33M
J7011M 11 17.3 17.3 10.3 57.2 69.9 0.18 lbs. ASME B107.33M
J7012M 12 18.9 18.9 11.1 57.2 69.9 0.20 lbs. ASME B107.33M
J7013M 13 19.1 19.1 11.9 57.2 69.9 0.22 lbs. ASME B107.33M
J7014M 14 20.5 20.5 12.7 57.2 69.9 0.22 lbs. ASME B107.33M
J7015M 15 21.8 21.8 17.5 57.2 69.9 0.25 lbs. ASME B107.33M
J7016M 16 23.0 23.0 17.5 57.2 69.9 0.29 lbs. ASME B107.33M
J7017M 17 25.4 25.4 17.5 57.2 69.9 0.37 lbs. ASME B107.33M
J7018M 18 26.1 26.1 17.5 57.2 69.9 0.38 lbs. ASME B107.33M
J7019M 19 26.8 26.8 17.5 57.2 69.9 0.38 lbs. ASME B107.33M
J7020M 20 28.2 28.2 19.7 57.2 69.9 0.42 lbs. ASME B107.33M
J7021M 21 29.4 29.4 19.7 57.2 69.9 0.46 lbs. ASME B107.33M
J7022M 22 30.5 30.5 20.4 57.2 69.9 0.49 lbs. ASME B107.33M
J7023M 23 31.8 31.8 20.4 57.2 69.9 0.53 lbs. ASME B107.33M
J7024M 24 33.0 33.0 23.5 57.2 69.9 0.58 lbs. ASME B107.33M

3/8" DRIVE THIN WALL DEEP IMPACT SAE - 6 POINT
• Reduced wall thickness helps improve access to fasteners in

restricted areas.
• All impact sockets feature one through hole and a groove to accept
• They designed to fit into smaller spaces.
as tire service.
Product in. Weight

ID No. B C D E L lbs.
J7708HT 1/4" 27/64" 11/16" 9/32" 2-1/4" 2-3/4" 0.1 lbs.
J7710HT 5/16" 31/64" 11/16" 1/4" 2-1/4" 2-3/4" 0.1 lbs.
J7711HT 11/32" 1/2" 11/16" 9/32" 2-1/4" 2-3/4" 0.1 lbs.
J7712HT 3/8" 37/64" 11/16" 5/16" 2-1/4" 2-3/4" 0.1 lbs.
J7714HT 7/16" 41/64" 11/16" 11/32" 2-1/4" 2-3/4" 0.2 lbs.
J7716HT 1/2" 23/32" 23/32" 13/32" 2-1/4" 2-3/4" 0.2 lbs.
J7718HT 9/16" 25/32" 25/32" 1/2" 2-1/4" 2-3/4" 0.2 lbs.
J7720HT 5/8" 7/8" 7/8" 1/2" 2-1/4" 2-3/4" 0.30 lbs.
J7722HT 11/16" 15/16" 15/16" 1/2" 2-1/4" 2-3/4" 0.30 lbs.
J7724HT 3/4" 1" 1" 17/32" 2-1/4" 2-3/4" 0.4 lbs.
J7728HT 7/8" 1-7/32" 1-7/32" 13/16" 2-1/8" 2-3/4" 0.40 lbs.
J7730HT 15/16" 1-1/4" 1-1/4" 13/16" 2-1/8" 2-3/4" 0.50 lbs.

3/8" THIN WALL DEEP IMPACT METRIC - 6 POINT

• Reduced wall thickness helps improve access to fasteners in restricted areas.
• All Impact sockets feature one through hole and a groove to accept a retaining ring
and pin to secure the socket to the power tool anvil.
• Proto® 6 Point Impact Sockets are ideal for use on stubborn or damaged fasteners,
and also on fasteners made from soft materials.
• The TorquePlus™ design is a high performance drive configuration which allows for
quick and easy socket engagement to the fastener flats, not the corners.
• The TorquePlus™ configuration employs a radius-corner design, shifting contact area
and stress away from the fastener corners and distributing contact stresses over a
large area of the socket, minimizing slippage.
• The TorquePlus™ internal design minimizes fastener rounding, helps to extend fastener
life, and allows the user to more easily turn worn, rounded, or rusted fasteners.
• Thinner walls help improve productivity by making it easier to gain access to fasteners
in confined spaces.
• Often used in application where fasteners are close together, such as tire service.
Product mm Weight
J7008MHT 8 12.2 17.3 6.4 31.7 50.8 0.11
J7009MHT 9 13.3 17.3 7.8 30.3 50.8 0.11
J7010MHT 10 15 17.3 8.7 29.4 50.8 0.11
J7011MHT 11 17.3 17.3 8.4 29.7 50.8 0.12
J7012MHT 12 17.3 17.3 9.6 28.5 50.8 0.12
J7013MHT 13 18 18 10.5 27.6 50.8 0.12
J7014MHT 14 19.7 19.7 12 26.1 50.8 0.14
J7015MHT 15 21 21 12.7 25.4 50.8 0.17
J7016MHT 16 22.2 22.2 12.7 25.4 50.8 0.18
J7017MHT 17 25.4 25.4 12.7 25.4 50.8 0.20
J7018MHT 18 24.8 24.8 12.7 25.4 50.8 0.20
J7019MHT 19 25.4 25.4 13.5 24.6 50.8 0.25


Product Weight
ID No. L lbs.
J7206TX E6 1-1/4" .06
J7207TX E7 1-1/4" .07
J7208TX E8 1-1/4" .07
J7210TX E10 1-1/4" .07
J7212TX E12 1-1/4" .07
J7214TX E14 1-1/4" .09
J7216TX E16 1-1/4" .10
3/8" DRIVE UNIVERSAL SOCKETS - 6 POINT
• Proto 6 Point Sockets can be used on stubborn hex bolts

or bolts made from soft materials.
• The TorquePlus™ system high performance design allows
the socket to contact the fastener away from the corners.
• Contact stresses are dispersed over a larger area.
• Risk of rounding the fastener is reduced.
• Enables users to turn worn, rounded fasteners.

J7273P 3/8" 9/16" 31/32" 9/64" 13/32" 2-5/16" .31 ASME B107.2
J7274P 7/16" 21/32" 31/32" 15/64" 15/32" 2-3/8" .31 ASME B107.2
J7275P 1/2" 47/64" 31/32" 15/64" 17/32" 2-7/16" .32 ASME B107.2
J7276P 9/16" 27/32" 31/32" 17/64" 19/32" 2-15/32" .33 ASME B107.2
J7277P 5/8" 31/32" 31/32" 5/16" 19/32" 2-15/32" .36 ASME B107.2
3/8" DRIVE UNIVERSAL JOINT
• Patented “Pinless” design for greater safety and durability.

• Position at right angles to turn fasteners where obstructions
prevent a straight application.
Product Weight ASME
ID No. L lbs. Spec.
J7270P 2-11/32" .29 ASME B107.2

3/8" DRIVE ADAPTERS
• Use adapters to help increase or decrease drive end size.

• Do not use hand adapters with power tools.
• Do not overtorque small sockets when using them with
adapters on large drive tools.
Product F M Weight ASME
ID No. L lbs. Spec.
J7650 3/8" F x 1/2" M 1-5/16" 0.13 lbs. ASME B107.2
J7651 1/2" F x 3/8" M 1-7/16" 0.12 lbs. ASME B107.2
3/8" DRIVE HEX BITS
Product in. Weight

ID No. lbs.
J7290 1/8 1/8" 1-5/8" 2-23/32" .05 4980RKA
J7290 5/32 5/32" 1-5/8" 2-23/32" .05 4981RKA
J7290 3/16 3/16" 1-5/8" 2-23/32" .06 4982RKA
J7290 7/32 7/32" 1-5/8" 2-23/32" .07 4984RKA
J7290 1/4 1/4" 1-5/8" 2-23/32" .08 4985RKA
J7290 5/16 5/16" 1-5/8" 2-23/32" .10 4987RKA
J7290 3/8 3/8" 1-5/8" 2-23/32" .13 4988RKA
3/8" DRIVER METRIC HEX BITS
Product mm Weight
ID No. lbs.
J7290-4M 4 41.3 69.1 .06 1404MRKA
J7290-5M 5 41.3 69.1 .06 1405MRKA
J7290-6M 6 41.3 69.1 .08 1406MRKA
J7290-8M 8 41.3 69.1 .10 1408MRKA
J7290-10M 10 41.3 69.1 .14 1410MRKA

3/8" DRIVE EXTENSIONS
• Use extensions to gain access to fasteners in locations that

would otherwise be difficult to reach.
• Male square is oriented in line with female squares for use
with fixed head torque wrenches.
• Full chamfer at drive opening (when applicable) for easy
engagement with drive tools.
Product Weight ASME
ID No. L lbs. Spec.
J7175P 3" .18 ASME B107.2
J7176P 6" .35 ASME B107.2
J7178P 12" .69 ASME B107.2
3/8" DRIVE HAND IMPACT DRIVER
• Designed to loosen hard to turn bolts and screws.

• Heavy-Duty spring for added torque.
Product Weight
ID No. L lbs.
J7099 5-1/2" 1.66
3/8" DRIVE RETAINING RINGS
• Proto® 3/8" Drive Retaining Rings have a one-piece,

without a crush gauge.
Product Weight
ID No. Description Length Width Height lbs.
JRR37560 Retaining Ring 3/8" Drive 600 GRV 11/16" 11/16" 1/16" 0.01
JRR37575 Retaining Ring 3/8" Drive 750 GRV 13/16" 13/16" 1/16' 0.01
JRR37595 Retaining Ring 3/8" Drive 950 GRV 1" 1" 1/16" 0.01
JRR37511 Retaining Ring 3/8" Drive 1100 GRV 1-3/16" 1-3/16" 1/16" 0.01
JRR37512 Retaining Ring 3/8" Drive 1200 GRV 1-1/4" 1-1/4" 1/16' 0.01


• Weight: 10 lbs.
Product ASME
J7434H Socket, Impact 1/2" Dr. 1-1/16" 6 Pt. ASME B107.2
J2592 Socket Clips


Product ASME
J2592 Socket Clips


• Weight: 4.1lbs.
Product ASME
J2592 Socket Clips


Product ASME
J74206 J7408M Socket, Impact 1/2" Dr. 8 mm 6 Pt. ASME B107.33M
J7409M Socket, Impact 1/2" Dr. 9 mm 6 Pt. ASME B107.33M
J2592 Socket Clips


Product ASME
J74204 J7410M Socket, Impact 1/2" Dr. 10 mm 6 Pt. ASME B107.33M
J2592 Socket Clips


Product
J74202 J7410M Socket, Impact 1/2" Dr. 10 mm 6 Pt.
J7411M Socket, Impact 1/2" Dr. 11 mm 6 Pt.
J2592 Socket Clips


Product ASME
J74216 J7308M Socket, Impact 1/2" Dr. 8 mm 6 Pt. Deep ASME B107.33M
J7309M Socket, Impact 1/2" Dr. 9 mm 6 Pt. Deep ASME B107.33M
J2592 Socket Clips


Product
J74214 J7310M Socket, Impact 1/2" Dr. 10 mm 6 Pt. Deep ASME B107.33M
J2592 Socket Clips


Product ASME
J74116 J7312H Socket, Impact 1/2" Dr. 3/8" 6 Pt. Deep ASME B107.2
J7314H Socket, Impact 1/2" Dr. 7/16" 6 Pt. Deep ASME B107.2
J7332H Socket, Impact 1/2" Dr. 1" 6 Pt. Deep ASME B107.2
J7334H Socket, Impact 1/2" Dr. 1-1/16" 6 Pt. Deep ASME B107.2
J2585 Socket Bar 9"
J2592 Socket Clips


Product ASME
J2592 Socket Clips

SET NO. J74112 1/2" DRIVE 11 PC. DEEP SOCKET SET - 6 POINT

Product ASME
J2592 Socket Clips


Product ASME
J74212 J7310M Socket Imp. 1/2" Dr., 6 pt. Deep 10 mm ASME B107.33M
J7311M Socket Imp. 1/2" Dr., 6 pt. Deep 11 mm ASME B107.33M
J2592 Socket Clips

SET NO. J74117 - 1/2" DRIVE 15 PC. DEEP THIN WALL IMPACT SOCKET SET - 6 POINT

• Reduced wall thickness helps improve access to
fasteners in restricted areas.
• All Impact sockets feature one through hole and a
groove to accept a retaining ring and pin to secure
the socket to the power tool anvil.
• Chamfered service ends for quick and positive
fastener engagement.
• Thinner walls help improve productivity by making it
easier to gain access to fasteners in confined spaces.
• Often used in application where fasteners are close
together, such as tire service.
Product
J74117 J7312HT 1/2" Dr. Deep Thin Wall Impact 3/8" ASME B107.2
J7314HT 1/2" Dr. Deep Thin Wall Impact 7/16" ASME B107.2
J7332HT 1/2" Dr. Deep Thin Wall Impact 1" ASME B107.2
J7334HT 1/2" Dr. Deep Thin Wall Impact 1-1/16" ASME B107.2

SET NO. J74142 - 1/2" DRIVE 7 PC. UNIVERSAL SOCKET SET - 6 POINT

Product ASME
J74142 J7474P Socket Impact 1/2" Dr. 7/16" 6 Pt. Universal ASME B107.2
J7475P Socket Impact 1/2" Dr. 1/2" 6 Pt. Universal ASME B107.2
J2585 Socket Bar 9"
J2592 Socket Clips

SET NO. J74152 - 1/2" DRIVE 7 PC. HEX BIT SOCKET SET
Product
J74152 J7441 1/4 Socket, Impact Hex Bit 1/2" Dr. 1/4"
J2585 Socket Bar 9"
J2592 Socket Clips
SET NO. J74252 - 1/2" DRIVE 6 PC. METRIC HEX BIT SOCKET SET

Product
J74252 J7441-6M Socket Impact Hex Bit 1/2" Dr. 6 mm
J2585 Socket Bar 9"
J2592 Socket Clips

SET NO. J07595 - 1/2" DRIVE 5 PC. HEX BIT SET
Product
J07590 1 Socket Impact Hex Bit 3/4" Dr. 1"
J2576 Socket Bar and Clips
SET NO. J7515 - 1/2" DRIVE 3 PC. LOCKING IMPACT EXTENSION SET
• Solid one-piece design helps prevent the locking components

from becoming loose or disengaged.
• Patented locking feature locks sockets to the extension with
exceptional force.
• Knurled shank provides a slip-resistant grip when hand-turning
the extension.
Product
J7515 J7503 1/2" x 3" Extension
J7505 1/2" x 5" Extension
J7510 1/2" x 10" Extension



J7412H 3/8" 41/64" 15/16" 11/32" 27/32" 1-1/2" 0.17 lbs. ASME B107.2
J7414H 7/16" 23/32" 15/16" 13/32" 27/32" 1-1/2" 0.18 lbs. ASME B107.2
J7416H 1/2" 51/64" 15/16" 13/32" 27/32" 1-1/2" 0.18 lbs. ASME B107.2
J7418H 9/16" 7/8" 15/16" 7/16" 27/32" 1-1/2" 0.18 lbs. ASME B107.2
J7420H 5/8" 1" 1" 1/2" 27/32" 1-1/2" 0.20 lbs. ASME B107.2
J7422H 11/16" 1-1/32" 1-1/32" 1/2" 27/32" 1-1/2" 0.22 lbs. ASME B107.2
J7424H 3/4" 1-7/64" 1-7/64" 51/64" 27/32" 1-1/2" 0.24 lbs. ASME B107.2
J7426H 13/16" 1-13/64" 1-13/64" 11/16" 31/32" 1-5/8" 0.31 lbs. ASME B107.2
J7428H 7/8" 1-17/64" 1-9/32" 43/64" 31/32" 1-5/8" 0.34 lbs. ASME B107.2
J7430H 15/16" 1-23/64" 1-23/64" 51/64" 1-3/32" 1-3/4" 0.44 lbs. ASME B107.2
J7432H 1" 1-1/2" 1-1/2" 25/32" 1-3/32" 1-3/4" 0.55 lbs. ASME B107.2
J7434H 1-1/16" 1-33/64" 1-33/64" 25/32" 1-3/32" 1-3/4" 0.53 lbs. ASME B107.2
J7436H 1-1/8" 1-19/32" 1-19/32" 25/32" 1-1/32" 2" 0.65 lbs. ASME B107.2
J7438H 1-3/16" 1-19/32" 1-19/32" 3/4" 1-1/64" 2" 0.85 lbs. ASME B107.2
J7440H 1-1/4" 1-3/4" 1-3/4" 3/4" 1-3/4" 2" 0.78 lbs. ASME B107.2
J7442H 1-5/16" 1-3/4" 1-3/4" 13/16" 63/64" 2" 0.73 lbs. ASME B107.2
J7444H 1-3/8" 1-51/64" 1-5/8" 15/16" 1-3/32" 2-1/8" 0.72 lbs. ASME B107.2
J7446H 1-7/16" 1-59/64" 1-5/8" 1" 1-37/64" 2-15/64" 0.87 lbs. ASME B107.2
J7448H 1-1/2" 2" 1-5/8" 1" 1-37/64" 2-15/64" 0.87 lbs. ASME B107.2
J7450H 1-9/16" 2-1/32" 1-5/8" 1" 1-1/2" 2-1/4" 0.87 lbs. ASME B107.2



J7408M 8 14.6 23.7 7.0 21.4 38.1 .13 ASME B107.33M
J7409M 9 16.3 23.7 9.5 21.4 38.1 .13 ASME B107.33M
J7410M 10 17.1 23.8 9.5 21.4 38.1 .18 ASME B107.33M
J7411M 11 18.3 23.8 9.5 21.4 38.1 .18 ASME B107.33M
J7412M 12 20.2 23.8 10.3 21.4 38.1 .17 ASME B107.33M
J7413M 13 20.2 23.8 11.1 21.4 38.1 .16 ASME B107.33M
J7414M 14 22.2 23.7 11.9 21.4 38.1 .18 ASME B107.33M
J7415M 15 23.7 23.7 12.7 21.6 38.1 .18 ASME B107.33M
J7416M 16 25.4 25.4 13.5 21.6 38.1 .20 ASME B107.33M
J7417M 17 26.1 26.1 14.3 21.6 38.1 .22 ASME B107.33M
J7418M 18 28.4 28.4 20.3 21.6 38.1 .24 ASME B107.33M
J7419M 19 28.2 28.2 18.8 21.6 38.1 .25 ASME B107.33M
J7420M 20 29.3 29.3 17.4 24.6 41.2 .30 ASME B107.33M
J7421M 21 30.6 30.6 17.2 24.6 41.2 .30 ASME B107.33M
J7422M 22 32.5 32.5 17.2 24.6 41.2 .36 ASME B107.33M
J7423M 23 34.8 34.8 17.0 24.6 41.2 .39 ASME B107.33M
J7424M 24 34.5 34.5 17.0 24.6 41.2 .43 ASME B107.33M
J7425M 25 34.9 34.9 20.2 27.8 44.5 .44 ASME B107.33M
J7426M 26 38.1 38.1 26.2 34.0 50.8 .61 ASME B107.33M
J7427M 27 38.1 38.1 26.1 34.0 50.8 .68 ASME B107.33M
J7428M 28 41.3 41.3 26.0 34.0 50.8 .73 ASME B107.33M
J7429M 29 41.4 41.4 25.9 34.1 50.8 .77 ASME B107.33M
J7430M 30 38.6 38.6 20.0 27.6 50.8 .80 ASME B107.33M
J7431M 31 38.6 38.6 20.3 27.6 50.8 .80 ASME B107.33M
J7432M 32 38.6 38.6 20.3 27.9 50.8 .80 ASME B107.33M
J7433M 33 46.8 46.8 25.9 32.4 50.8 .80 ASME B107.33M
J7434M 34 48.3 48.3 25.9 32.4 50.8 .80 ASME B107.33M
J7436M 36 51.2 51.2 30.3 34.1 50.8 1.12 ASME B107.33M
J7438M 38 54.6 54.6 30.3 34.1 60.4 .96 ASME B107.33M
J7441M 41 58.4 58.4 33.7 38.7 60.4 1.08 ASME B107.33M
J7446M 46 60.4 60.4 25.1 38.7 61.8 1.12 ASME B107.33M

• Large clearance holes, concentric opening and nut end chamfer make it
easy to position socket on fasteners.
• Made from high strength steel to help minimize wall thickness and provide
access to fasteners in recesses and where nuts and bolts protrude.
• Impact sockets are used wherever powered drive tools are used to install
or remove fasteners.
the corners.
extend fastener life, and allows the user to more easily turn worn, rounded,
or rusted fasteners.

J7412S 3/8" 47/64" 15/16" 17/64" 27/32" 1-1/2" .17 ASME B107.2
J7414S 7/16" 53/64" 15/16" 19/64" 27/32" 1-1/2" .17 ASME B107.2
J7416S 1/2" 15/16" 15/16" 11/32" 27/32" 1-1/2" .18 ASME B107.2
J7418S 9/16" 1-1/32" 1-1/32" 3/8" 27/32" 1-1/2" .21 ASME B107.2
J7420S 5/8" 1-1/8" 1-1/8" 27/32" 27/32" 1-1/2" .21 ASME B107.2
J7422S 11/16" 1-3/16" 1-3/16" 27/32" 27/32" 1-1/2" .29 ASME B107.2
J7424S 3/4" 1-11/32" 1-11/32" 27/32" 27/32" 1-1/2" .36 ASME B107.2
J7426S 13/16" 1-3/8" 1-3/8" 27/32" 27/32" 1-1/2" .39 ASME B107.2
J7428S 7/8" 1-1/2" 1-1/2" 31/32" 31/32" 1-5/8" .49 ASME B107.2
J7430S 15/16" 1-5/8" 1-5/8" 1-1/64" 1-3/32" 1-3/4" .68 ASME B107.2
J7432S 1" 1-3/4" 1-3/4" 1-1/64" 1-3/32" 1-3/4" .79 ASME B107.2
J7434S 1-1/16" 1-27/32" 1-27/32" 1-1/64" 1-11/32" 1-3/4" 1.08 ASME B107.2



J7412 3/8" 41/64" 15/16" 11/32" 27/32" 1-1/2" 0.16 lbs. ASME B107.2
J7414 7/16" 23/32" 15/16" 13/32" 27/32" 1-1/2" 0.17 lbs. ASME B107.2
J7416 1/2" 51/64" 15/16" 13/32" 27/32" 1-1/2" 0.18 lbs. ASME B107.2
J7418 9/16" 7/8" 15/16" 7/16" 27/32" 1-1/2" 0.18 lbs. ASME B107.2
J7420 5/8" 1" 1" 1/2" 27/32" 1-1/2" 0.20 lbs. ASME B107.2
J7422 11/16" 1-1/32" 1-1/32" 1/2" 27/32" 1-1/2" 0.21 lbs. ASME B107.2
J7424 3/4" 1-7/64" 1-7/64" 51/64" 27/32" 1-1/2" 0.23 lbs. ASME B107.2
J7426 13/16" 1-13/64" 1-13/64" 11/16" 31/32" 1-5/8" 0.30 lbs. ASME B107.2
J7428 7/8" 1-9/32" 1-9/32" 43/64" 31/32" 1-5/8" 0.34 lbs. ASME B107.2
J7430 15/16" 1-23/64" 1-23/64" 51/64" 1-3/32" 1-3/4" 0.42 lbs. ASME B107.2
J7432 1" 1-1/2" 1-1/2" 25/32" 1-3/32" 1-3/4" 0.53 lbs. ASME B107.2
J7434 1-1/16" 1-33/64" 1-33/64" 25/32" 1-3/32" 1-3/4" 0.52 lbs. ASME B107.2
J7436 1-1/8" 1-19/32" 1-19/32" 25/32" 1-1/32" 2" 0.62 lbs. ASME B107.2
J7438 1-3/16" 1-3/4" 1-3/4" 3/4" 1-1/64" 2" 0.80 lbs. ASME B107.2
J7440 1-1/4" 1-3/4" 1-3/4" 3/4" 1" 2" 0.77 lbs. ASME B107.2
J7442 1-5/16" 1-3/4" 1-3/4" 13/16" 63/64" 2" 0.72 lbs. ASME B107.2
J7444 1-3/8" 1-51/64" 1-5/8" 13/16" 1-3/32" 2-1/8" 0.70 lbs. ASME B107.2
J7446 1-7/16" 1-59/64" 1-5/8" 1" 1-37/64" 2-15/64" 0.80 lbs. ASME B107.2
J7448 1-1/2" 2" 1-5/8" 1" 1-37/64" 2-15/64" 0.86 lbs. ASME B107.2

Product Weight
J7414TX E14 11/16" 7/8" 7/16" 27/32" 11/2" 0.14 lbs.
J7416TX E16 11/16" 7/8" 7/16" 27/32" 11/2" 0.14 lbs.
J7418TX E18 27/32" 7/8" 17/32" 27/32" 11/2" 0.14 lbs.
J7420TX E20 15/16" 15/16" 19/32" 27/32" 11/2" 0.17 lbs.
1/2" DRIVE DEEP LENGTH SOCKET - 6 POINT


J7312H 3/8" 19/32" 15/16" 15/16" 2-5/8" 3-1/4" .42 lbs. ASME B107.2
J7314H 7/16" 23/32" 15/16" 11/32" 1-5/8" 3-1/4" .44 lbs. ASME B107.2
J7316H 1/2" 1-25/32" 15/16" 7/16" 1-5/8" 3-1/4" .44 lbs. ASME B107.2
J7318H 9/16" 7/8" 15/16" 1/2" 1-5/8" 3-1/4" .41 lbs. ASME B107.2
J7320H 5/8" 1" 1" 9/16" 1-5/8" 3-1/4" .44 lbs. ASME B107.2
J7322H 11/16" 1-1/32" 1-1/32" 5/8" 2-5/8" 3-1/4" .47 lbs. ASME B107.2
J7324H 3/4" 1-7/64" 1-1/8" 1-5/32" 2-5/8" 3-1/4" .53 lbs. ASME B107.2
J7326H 13/16" 1-3/16" 1-3/16" 1-5/32" 2-5/8" 3-1/4" .62 lbs. ASME B107.2
J7328H 7/8" 1-19/64" 1-9/32" 1-13/32" 2-7/8" 3-1/2" .78 lbs. ASME B107.2
J7330H 15/16" 1-3/8" 1-3/8" 1-13/32" 2-7/8" 3-1/2" .80 lbs. ASME B107.2
J7332H 1" 1-1/2" 1-1/2" 1-13/32" 2-7/8" 3-1/2" 1.02 lbs. ASME B107.2
J7334H 1-1/16" 1-1/2" 1-33/64" 1-17/32" 2-7/8" 3-1/2" .99 lbs. ASME B107.2
J7336H 1-1/8" 1-5/8" 1-5/8" 1-13/32" 2-7/8" 3-1/2" 1.07 lbs. ASME B107.2
J7338H 1-3/16" 1-13/16" 1-21/32" 1-1/64" 2-7/8" 3-1/2" 1.47 lbs. ASME B107.2
J7340H 1-1/4" 1-13/16" 1-21/32" 1-1/64" 2-7/8" 3-1/2" 1.39 lbs. ASME B107.2
J7342H 1-5/16" 1-7/8" 1-21/32" 1-1/16" 2-7/8" 3-1/2" 1.36 lbs. ASME B107.2
J7344H 1-3/8" 1-7/8" 1-21/32" 1-7/64" 2-7/8" 3-1/2" 1.31 lbs. ASME B107.2
J7346H 1-7/16" 2-1/16" 1-21/32" 1-5/32" 2-7/8" 3-1/2" 1.67 lbs. ASME B107.2
J7348H 1-1/2" 2-1/16" 1-21/32" 1-13/64" 2-7/8" 3-1/2" 1.50 lbs. ASME B107.2
J7350H 1-9/16" 2" 1-5/8" 1-1/4" 1-1/4" 3-1/2" 1.80 lbs. ASME B107.2



J7308M 8 14.5 22.1 8.1 65.8 82.6 .29 ASME B107.33M
J7309M 9 15.2 22.1 9.4 65.8 82.6 .29 ASME B107.33M
J7310M 10 16.3 23.7 11.1 65.8 82.6 .43 ASME B107.33M
J7311M 11 18.0 23.7 11.1 65.8 82.6 .43 ASME B107.33M
J7312M 12 18.8 23.7 12.7 65.8 82.6 .43 ASME B107.33M
J7313M 13 20.0 23.7 12.7 65.8 82.6 .42 ASME B107.33M
J7314M 14 22.0 23.7 12.7 65.8 82.6 .40 ASME B107.33M
J7315M 15 23.7 25.3 14.6 65.8 82.6 .40 ASME B107.33M
J7316M 16 25.3 26.0 15.2 65.8 82.6 .46 ASME B107.33M
J7317M 17 26.0 27.0 15.9 65.8 82.6 .45 ASME B107.33M
J7318M 18 27.0 27.0 17.2 65.8 82.6 .49 ASME B107.33M
J7319M 19 28.2 28.2 29.5 65.8 82.6 .52 ASME B107.33M
J7320M 20 29.4 29.4 29.5 65.8 82.6 .55 ASME B107.33M
J7321M 21 30.6 30.6 35.9 65.8 82.6 .66 ASME B107.33M
J7322M 22 32.5 32.5 35.9 72.2 88.9 .75 ASME B107.33M
J7323M 23 33.0 33.0 35.9 72.2 88.9 .75 ASME B107.33M
J7324M 24 34.5 34.5 35.9 72.2 88.9 .81 ASME B107.33M
J7325M 25 36.4 36.4 35.9 72.2 88.9 .91 ASME B107.33M
J7326M 26 38.0 38.0 35.9 72.2 88.9 1.03 ASME B107.33M
J7327M 27 39.8 39.8 35.9 72.2 88.9 1.04 ASME B107.33M
J7328M 28 41.3 41.3 35.9 72.2 88.9 1.04 ASME B107.33M
J7329M 29 41.4 41.4 38.4 72.2 88.9 1.04 ASME B107.33M
J7330M 30 42.7 42.7 35.8 72.2 88.9 1.05 ASME B107.33M
J7332M 32 45.3 45.3 30.6 72.2 88.9 1.05 ASME B107.33M
J7333M 33 47.2 47.2 35.2 72.2 88.9 1.05 ASME B107.33M
J7334M 34 49.2 49.4 35.2 72.2 88.9 1.05 ASME B107.33M
J7335M 35 52.3 52.3 35.2 72.2 88.9 1.06 ASME B107.33M
J7336M 36 52.3 52.3 35.5 72.2 88.9 1.06 ASME B107.33M


make it easy to position socket on fasteners.
and bolts protrude.
• Impact sockets are designed to withstand higher torque and
• Extra length provides easy access to fasteners in recesses or
where nuts and bolts protrude.

J7312S 3/8" 3/4" 7/8" 11/32" 2-19/32" 3-1/4" .41 ASME B107.2
J7314S 7/16" 27/32" 15/16" 3/8" 2-19/32" 3-1/4" .42 ASME B107.2
J7316S 1/2" 51/16" 15/16" 7/16" 2-19/32" 3-1/4" .40 ASME B107.2
J7318S 9/16" 1-1/32" 1-1/32" 1/2" 2-19/32" 3-1/4" .50 ASME B107.2
J7320S 5/8" 1-1/8" 1-1/8" 1/2" 2-19/32" 3-1/4" .58 ASME B107.2
J7322S 11/16" 1-3/16" 1-3/16" 1-5/32" 2-19/32" 3-1/4" .61 ASME B107.2
J7324S 3/4" 1-5/16" 1-5/16" 1-5/32" 2-19/32" 3-1/4" .78 ASME B107.2
J7326S 13/16" 1-3/8" 1-3/8" 1-5/32" 2-19/32" 3-1/4" .82 ASME B107.2
J7328S 7/8" 1-1/2" 1-1/2" 1-13/32" 2-27/32" 3-1/2" 1.08 ASME B107.2
J7330S 15/16" 1-39/64" 1-39/64" 1-13/32" 2-27/32" 3-1/2" 1.33 ASME B107.2
J7332S 1" 1-11/16" 1-11/16" 1-13/32" 2-27/32" 3-1/2" 1.44 ASME B107.2

• Proto 12 Point Sockets are for rapid seating on hex

or 12 Point fasteners.
• The TorquePlus™ system high performance design allows
the socket to contact the fastener away from the corners.
• Contact stresses are dispersed over a larger area.
• Risk of rounding the fastener is reduced.
• Enables users to turn worn, rounded fasteners.

J7312 3/8" 19/32" 15/16" 5/16" 2-19/32" 3-1/4" 0.43 lbs. ASME B107.2
J7314 7/16" 23/32" 15/16" 3/8" 2-5/8" 3-1/4" 0.42 lbs. ASME B107.2
J7316 1/2" 1-25/32" 15/16" 7/16" 2-5/8" 3-1/4" 0.45 lbs. ASME B107.2
J7318 9/16" 7/8" 15/16" 1/2" 2-5/8" 3-1/4" 0.40 lbs. ASME B107.2
J7320 5/8" 1" 1" 9/16" 2-5/8" 3-1/4" 0.45 lbs. ASME B107.2
J7322 11/16" 1-1/32" 1-1/32" 5/8" 2-5/8" 3-1/4" 0.45 lbs. ASME B107.2
J7324 3/4" 1-7/64" 1-1/8" 1-5/32" 2-5/8" 3-1/4" 0.47 lbs. ASME B107.2
J7326 13/16" 1-3/16" 1-3/16" 1-5/32" 2-5/8" 3-1/4" 0.56 lbs. ASME B107.2
J7328 7/8" 1-19/64" 1-19/64" 1-13/32" 2-7/8" 3-1/2" 0.68 lbs. ASME B107.2
J7330 15/16" 1-3/8" 1-3/8" 1-13/32" 2-7/8" 3-1/2" 0.80 lbs. ASME B107.2
J7332 1" 1-1/2" 1-1/2" 1-13/32" 2-7/8" 3-1/2" 0.99 lbs. ASME B107.2
J7334 1-1/16" 1-1/2" 1-1/2" 1-17/32" 2-7/8" 3-1/2" 0.94 lbs. ASME B107.2
J7336 1-1/8" 1-19/32" 1-19/32" 1-13/32" 2-7/8" 3-1/2" 1.06 lbs. ASME B107.2
J7338 1-3/16" 43/64" 43/64" 1-13/64" 2-7/8" 3-1/2" 1.17 lbs. ASME B107.2
J7340 1-1/4" 1-3/4" 1-3/4" 1-13/64" 2-7/8" 3-1/2" 1.23 lbs. ASME B107.2
J7342 1-5/16" 1-27/32" 1-27/32" 1-13/64" 2-7/8" 3-1/2" 1.37 lbs. ASME B107.2
J7344 1-3/8" 1-29/32" 1-29/32" 1-13/64" 2-7/8" 3-1/2" 1.54 lbs. ASME B107.2
J7346 1-7/16" 2" 2" 1-13/64" 2-7/8" 3-1/2" 1.62 lbs. ASME B107.2
J7348 1-1/2" 2-1/16" 2-1/16" 1-13/64" 2-7/8" 3-1/2" 1.76 lbs. ASME B107.2

1/2" DRIVE THIN WALL METRIC STANDARD LENGTH SOCKETS - 12 POINT

fastener corners and distributing contact stresses over a

J7410MT 10 15.5 22.7 6.4 16.7 38.1 .16 ASME B107.33M
J7411MT 11 16.8 23.7 7.1 16.7 38.1 .16 ASME B107.33M
J7412MT 12 17.5 23.7 7.8 16.7 38.1 .18 ASME B107.33M
J7413MT 13 18.5 23.7 8.7 16.7 38.1 .15 ASME B107.33M
J7414MT 14 20.1 23.7 9.5 16.7 38.1 .15 ASME B107.33M
J7415MT 15 21.5 23.7 11.1 16.7 38.1 .16 ASME B107.33M
J7416MT 16 22.4 23.7 11.1 16.7 38.1 .15 ASME B107.33M
J7417MT 17 23.7 23.7 11.1 16.7 38.1 .15 ASME B107.33M
J7418MT 18 25.4 25.4 11.1 16.7 38.1 .18 ASME B107.33M
J7419MT 19 26.2 26.2 21.4 16.7 38.1 .17 ASME B107.33M
J7420MT 20 28.7 27.0 21.4 16.7 38.1 .17 ASME B107.33M
J7421MT 21 30.2 28.7 21.4 16.7 38.1 .43 ASME B107.33M
J7422MT 22 31.8 30.2 21.4 16.7 38.1 .25 ASME B107.33M
J7423MT 23 33.3 31.8 21.4 16.7 38.1 .30 ASME B107.33M
J7424MT 24 35.6 33.3 21.4 16.7 38.1 .32 ASME B107.33M
J7430MT 30 42.9 41.3 26.2 34.1 50.8 .58 ASME B107.33M
J7432MT 32 45.2 41.3 26.2 34.1 50.8 .64 ASME B107.33M

1/2" DRIVE DEEP THIN WALL SOCKETS - 6 POINT

• Reduced wall thickness helps improve access to fasteners in
restricted areas.
as tire service.

J7312HT 3/8 9/16 15/16 5/16 2-9/32" 3-1/4 0.3 ASME B107.2
J7314HT 7/16 21/32 15/16 3/8 2-1/4" 3-1/4 0.4 ASME B107.2
J7316HT 1/2 23/32 15/16 3/8 2-3/16" 3-1/4 0.4 ASME B107.2
J7318HT 9/16 13/16 15/16 7/16 2-3/32" 3-1/4 0.4 ASME B107.2
J7320HT 5/8 7/8 15/16 1/2 2-1/32 3-1/4 0.4 ASME B107.2
J7322HT 11/16 31/32 31/32 1/2 2 3-1/4 0.4 ASME B107.2
J7324HT 3/4 1-1/32 1-1/32 1-11/64 1-7/16 3-1/4 0.5 ASME B107.2
J7326HT 13/16 1-1/8 1-1/8 1-11/64 1-7/16 3-1/4 0.5 ASME B107.2
J7328HT 7/8 1-3/16 1-3/16 1-13/32 1-7/16 3-1/2 0.5 ASME B107.2
J7330HT 15/16 1-17/64 1-17/64 1-13/32 1-7/16 3-1/2 0.7 ASME B107.2
J7332HT 1 1-3/8 1-3/8 1-13/32 1-7/16 3-1/2 0.8 ASME B107.2
J7334HT 1-1/16 1-31/64 1-31/64 1-17/32 1-5/16 3-1/2 1.0 ASME B107.2
J7336HT 1-1/8 1-9/16 1-9/16 1-17/32 1-5/16 3-1/2 1.0 ASME B107.2
J7338HT 1-3/16 1-5/8 1-5/8 1-17/32 1-5/16 3-1/2 1.1 ASME B107.2
J7340HT 1-1/4 1-11/16 1-11/16 1-17/32 1-5/16 3-1/2 1.2 ASME B107.2
J7342HT 1-5/16 1-13/16 1-13/16 1-17/32 1-5/16 3-1/2 1.3 ASME B107.2
J7344HT 1-3/8 1-13/16 1-13/16 1-17/32 1 3-1/2 1.3 ASME B107.2
J7346HT 1-7/16 1-15/16 1-15/16 1-13/16 1 3-1/2 1.5 ASME B107.2
J7348HT 1-1/2 2 2 1-13/16 1 3-1/2 1.7 ASME B107.2

1/2" DRIVE METRIC DEEP THIN WALL SOCKETS
• Specifically designed for tight clearance applications.

• Reduced well thickness helps improve access to fasteners in
restricted areas.
• All impact sockets feature one through hole and a groove to accept a
retaining ring and pin to secure the socket to the power tool anvil.
• TorquePlus™ wrench system, allows the socket to contact the fastener
away from the corner while also dispensing stress over a larger area
allowing up to 15% more torque to be applied to the fastener.

J7310MHT 10 15.5 23.7 9.5 56.4 82.6 0.43 ASME B107.33M
J7311MHT 11 16.8 23.7 10.0 55.9 82.6 0.44 ASME B107.33M
J7312MHT 12 17.5 23.7 11.1 54.8 82.6 0.45 ASME B107.33M
J7313MHT 13 18.5 23.7 11.1 54.8 82.6 0.41 ASME B107.33M
J7314MHT 14 20.6 23.7 11.1 54.8 82.6 0.39 ASME B107.33M
J7315MHT 15 21.5 23.7 13.5 52.4 82.6 0.37 ASME B107.33M
J7316MHT 16 22.4 23.7 13.5 52.4 82.6 0.37 ASME B107.33M
J7317MHT 17 23.9 23.7 17.5 48.4 82.6 0.4 ASME B107.33M
J7318MHT 18 25.4 25.4 19.1 46.8 82.6 0.37 ASME B107.33M
J7319MHT 19 26.2 26.2 29.5 36.4 82.6 0.41 ASME B107.33M
J7320MHT 20 27.0 27.0 29.5 36.4 82.6 0.41 ASME B107.33M
J7321MHT 21 28.7 28.7 35.9 36.3 88.9 0.51 ASME B107.33M
J7322MHT 22 30.2 30.2 35.9 36.3 88.9 0.56 ASME B107.33M
J7323MHT 23 31.8 31.8 35.9 36.3 88.9 0.63 ASME B107.33M
J7324MHT 24 33.3 33.3 35.9 36.3 88.9 0.72 ASME B107.33M
J7330MHT 30 45.1 45.1 64.8 36.3 88.9 1.45 ASME B107.33M


Product Weight ASME

ID No. L lbs. Spec.
J7180P 2" .19 ASME B107.2
J7182P 3" .30 ASME B107.2
J7181P 5" .47 ASME B107.2
J7184P 9" .89 ASME B107.2
J7183-00 10" .89 ASME B107.2
1/2" DRIVE LOCKING IMPACT EXTENSIONS
• Solid one-piece design prevents the locking components

from becoming loose or disengaged.
• Patented locking feature locks sockets to the extension
with exceptional force.
• Knurled shank provides a non-slip grip when hand-turning
the Extension.
Product Weight
ID No. Description Dimensions lbs.
J7503 1/2" x 3" Extension 7/8" W x 3" L 0.34 lbs.


tightly during use.
• Power sockets with high surface hardness are used in high-
speed assembly operations. Ideal for nut runners.

J7412PF 3/8" 47/64" 15/16" 15/16" 1-1/2" .18 ASME B107.2
J7414PF 7/16" 47/64" 15/16" 1/4" 1-1/2" .17 ASME B107.2
J7416PF 1/2" 51/64" 15/16" 17/64" 1-1/2" .20 ASME B107.2
J7418PF 9/16" 15/16" 15/16" 21/64" 1-1/2" .20 ASME B107.2

tightly during use.
• Power sockets with high surface hardness are used in
highspeed assembly operations. Ideal for nut runners.
J7412HF 3/8" 47/64" 15/16" 15/64" 1-1/2" 0.18 ASME B107.2
J7414HF 7/16" 45/64" 15/16" 1/4" 1-1/2" 0.17 ASME B107.2
J7416HF 1/2" 25/32" 15/16" 17/64" 1-1/2" 0.18 ASME B107.2
J7418HF 9/16" 7/8" 15/16" 21/64" 1-1/2" 0.20 ASME B107.2
J7420HF 5/8" 1" 1" 25/64" 1-1/2" 0.20 ASME B107.2

1/2" DRIVE METRIC PROTOGRIP ™ HIGH STRENGTH MAGNETIC IMPACT SOCKET - 6 POINT
• ProtoGrip™ Magnetic Sockets use high strength magnets made

from a rare earth magnet alloy/nylon blend.
• Designed to easily pick up heavy fasteners and hold them tightly
during use.
• Strong magnetic hold helps increase efficiency when installing
fasteners in awkward or hard-to-reach locations.
• Power sockets with high surface hardness are used in high speed
assembly operations. Ideal for nut runners.

J7410MHF 10 16.3 23.8 5.6 38.1 0.19 ASME B107.2
J7413MHF 13 20.2 23.8 6.7 38.1 0.19 ASME B107.2
J7414MHF 14 23.8 23.8 7.1 38.1 0.20 ASME B107.2
J7415MHF 15 23.8 23.8 7.1 38.1 0.21 ASME B107.2
J7418MHF 18 27 27 10.3 38.1 0.27 ASME B107.2
1/2" DRIVE UNIVERSAL SOCKETS - 6 POINT
• Patented “pinless” design for safety and durability.

• Patented pinless universal design uses a solid knuckle
joint to help minimize binding and breaking that can
occur with conventional pinned universal sockets by
spreading force over a larger contact surface.
• Position at right angles to turn fasteners where
obstructions prevent a straight application.

J7474P 7/16" 5/8" 1-9/64" 15/64" 21/32" 2-3/4" 0.47 lbs. ASME B107.2
J7475P 1/2" 47/64" 1-9/64" 1/4" 21/32" 2-21/32" 0.49 lbs. ASME B107.2
J7476P 9/16" 53/64" 1-9/64" 9/32" 21/32" 2-21/32" 0.50 lbs. ASME B107.2
J7477P 5/8" 59/64" 1-9/64" 5/16" 21/32" 2-21/32" 0.50 lbs. ASME B107.2
J7478P 11/16" 1-1/32" 1-9/64" 11/32" 1/2" 2-3/4" 0.57 lbs. ASME B107.2
J7479P 3/4" 1-1/8" 1-9/64" 3/8" 5/8" 2-7/8" 0.62 lbs. ASME B107.2
J7480P 13/16" 1-17/64" 1-9/64" 29/64" 11/16" 2-7/8" 0.66 lbs. ASME B107.2

• Patented “pinless” design for safety and durability.

• Patented pinless universal design uses a solid knuckle joint
to minimize binding and breaking that can occur with
conventional pinned universal sockets by spreading force
over a larger contact surface.
Product Weight ASME
ID No. L lbs. Spec.
J7470P 2-15/16" 0.58 lbs. ASME B107.2
1/2" DRIVE HEX BITS
Product in. Weight

ID No. lbs. Repair Kit
J7441 1/4 1/4" 1-3/4" 3-1/4" 0.18 lbs. J5441 1/4RKA
J7441 5/16 5/16" 1-3/4" 3-1/4" 0.22 lbs. J5441 5/16RKA
J7441 3/8 3/8" 1-3/4" 3-1/4" 0.24 lbs. J5441 3/8RKA
J7441 7/16 7/16" 1-3/4" 3-1/4" 0.27 lbs. J5441 7/16RKA
J7441 1/2 1/2" 1-7/8" 3-5/8" 0.47 lbs. J5441 1/2RKA
J7441 9/16 9/16" 1-7/8" 3-5/8" 0.49 lbs. J5441 9/16RKA
J7441 5/8 5/16" 2" 4" 0.84 lbs. J5441 5/8RKA
1/2" DRIVE METRIC HEX BITS
Product mm Weight
ID No. lbs.
J7441-6M 6 1-3/4" 3-1/4" 0.19 lbs. J5441-6MRKA
J7441-8M 8 1-3/4" 3-1/4" 0.26 lbs. J5441-8MRKA
J7441-10M 10 1-3/4" 3-1/4" 0.29 lbs. J5441-10MRKA
J7441-12M 12 1-3/4" 3-1/4" 0.29 lbs. J5441-12MRKA
J7441-14M 14 1-7/8" 3-5/8" 0.49 lbs. J5441-14MRKA
J7441-17M 17 2" 4" 0.88 lbs. J5441-17MRKA

1/2" DRIVE ADAPTERS
• Use adapters to help increase or decrease drive end size

• Do not over torque small sockets when using them with

ID No. L lbs. Spec.
J7650 3/8" F x 1/2" M 1-5/16" 0.13 lbs. ASME B107.2
J7651 1/2" F x 3/8" M 1-7/16" 0.12 lbs. ASME B107.2
J7652 1/2" F x 3/4" M 1-29/32" 0.35 lbs. ASME B107.2
J7653 3/4" F x 1/2" M 2-1/16" 0.48 lbs. ASME B107.2
J7655 5/8" F x 1/2" M 1-53/64" 0.34 lbs. ASME B107.2
1/2" DRIVE RETAINING RING
• Retaining Rings are used to help secure sockets onto

drive tools. They are not intended to bear any load. The
rotational forces are between the drive tool and the socket.
• One piece construction, no loose parts.
Product Weight
JRR50080 800 GRV 15/16" 15/16" 1/8" 0.002
JRR50087 870 GRV 1" 1" 1/8" 0.002
JRR50095 950 GRV 1-1/16" 1-1/16" 1/8" 0.002
JRR50105 1050 GRV 1-3/16" 1-3/16" 1/8" 0.002
JRR50115 1150 GRV 1-1/4" 1-1/4" 1/8" 0.002
JRR50130 1300 GRV 1-7/16" 1-7/16" 1/8" 0.002
JRR50145 1450 GRV 1-9/16" 1-9/16" 1/8" 0.002
JRR50160 1600 GRV 1-3/4" 1-3/4" 1/8" 0.003

SET NO. 07500-10 - 3/4" DRIVE 10 PC. IMPACT SOCKET SET - 6 POINT
Product
J07500-10 J07512 Socket Impact 3/4" Dr. 3/4" 6 Pt.
J07513 Socket Impact 3/4" Dr. 13/16" 6 Pt.
J07516 Socket Impact 3/4" Dr. 1" 6 Pt.
J07517 Socket Impact 3/4" Dr. 1-1/16" 6 Pt.
and provide access to fasteners in recesses and where nuts and
bolts protrude.
• Impact sockets are used where ever powered drive tools are
• Impact sockets are designed to withstand the high torque and
• Features two through holes and a groove to accept a Proto®
Retaining Ring or pin and o-ring to help secure the socket to the
drive tool anvil.
J07510SS 5/8" 1-1/4" 1-5/8" 25/64" 15/16" 2" 0.79 lbs. ASME B107.2
J07511SS 11/16" 1-11/32" 1-5/8" 7/16" 15/16" 1-7/8" 0.75 lbs. ASME B107.2
J07513SS 13/16" 1-5/8" 1-5/8" 33/64" 1-1/16" 2" 0.82 lbs. ASME B107.2



J07509 9/16" 1" 1-5/8" 23/64" 15/16 1-7/8" 0.66 ASME B107.2
J07510 5/8" 1-3/32" 1-5/8" 25/64" 15/16" 1-7/8" 0.67 ASME B107.2
J07511 11/16" 1-5/32" 1-5/8" 7/16" 1" 1-15/16" 0.67 ASME B107.2
J07512 3/4" 1-15/64" 1-5/8" 15/32" 1" 1-15/16" 0.79 ASME B107.2
J07513 13/16" 1-5/16" 1-5/8" 1/2" 1" 1-15/16" 0.76 ASME B107.2
J07514 7/8" 1-1/2" 1-5/8" 35/64" 1-1/16" 2" 0.73 ASME B107.2
J07515 15/16" 1-5/8" 1-5/8" 37/64" 1-1/16" 2" 0.78 ASME B107.2
J07516 1" 1-5/8" 1-5/8" 5/8" 1-1/8" 2-1/16 0.76 ASME B107.2
J07517 1-1/16" 1-5/8" 1-5/8" 21/32" 1-1/8" 2-1/16" 0.81 ASME B107.2
J07518 1-1/8" 1-3/4" 1-3/4" 45/64" 1-1/4" 2-3/16" 0.91 ASME B107.2
J07519 1-3/16" 1-7/8" 1-3/4" 47/64" 1-1/4" 2-3/16" 1.02 ASME B107.2
J07520 1-1/4" 2" 1-3/4" 3/4" 1-1/4" 2-3/16" 1.1 ASME B107.2
J07521 1-5/16" 2-1/8" 1-3/4" 27/32" 1-1/4" 2-3/16" 1.27 ASME B107.2
J07522 1-3/8" 2-1/8" 1-3/4" 13/16" 1-3/16" 2-1/4" 1.23 ASME B107.2
J07523 1-7/16" 2-1/4" 1-3/4" 7/8" 1-3/8" 2-5/16" 1.41 ASME B107.2
J07524 1-1/2" 2-3/8" 1-3/4" 1" 1-7/16" 2-3/8" 1.56 ASME B107.2
J07525 1-9/16" 2-3/8" 1-3/4" 1" 1-1/2" 2-7/16" 1.66 ASME B107.2
J07526 1-5/8" 2-3/8" 1-3/4" 1" 1-1/2" 2-7/16" 1.75 ASME B107.2
J07527 1-11/16" 2-39/64" 1-3/4" 1-1/8" 1-11/16" 2-5/8" 1.84 ASME B107.2
J07528 1-3/4" 2-39/64" 1-3/4" 1-1/8" 1-11/16" 2-5/8" 1.93 ASME B107.2
J07529 1-13/16" 2-3/4" 1-3/4" 1-1/8" 1-11/16" 2-5/8" 2.01 ASME B107.2
J07530 1-7/8" 2-3/4" 1-3/4" 1-1/4" 1-7/8" 2-13/16" 2.09 ASME B107.2
J07531 1-15/16" 2-7/8" 1-3/4" 1-1/4" 1-7/8" 2-13/16" 2.18 ASME B107.2
J07532 2" 3" 1-3/4" 1-1/4" 1-7/8" 2-13/16" 2.22 ASME B107.2
J07533 2-1/16" 3" 1-3/4" 1-3/8" 2-5/32" 3-3/32" 2.28 ASME B107.2
J07534 2-1/8" 3-1/8" 1-3/4" 1-3/8" 2-5/32" 3-3/32" 2.35 ASME B107.2
J07535 2-3/16" 3-1/4" 1-3/4" 1-3/8" 2-3/16" 3-1/8" 2.69 ASME B107.2
J07536 2-1/4" 3-5/16" 1-3/4" 1-1/2" 2-5/16" 3-1/4" 2.73 ASME B107.2
J07538 2-3/8" 3-1/2" 1-3/4" 1-1/2" 2-7/16" 3-3/8" 3.45 ASME B107.2

the corners.
extend fastener life, and allows the user to more easily turn worn, rounded,
or rusted fasteners.
• Large clearance holes, concentric opening and nut end chamfer make it
easy to position socket on fasteners.
• Made from high strength steel to help minimize wall thickness and provide
access to fasteners in recesses and where nuts and bolts protrude.
• Features two through holes and a groove to accept a Proto® Retaining
Ring or pin and o-ring to help secure the socket to the drive tool anvil.

J07512S 3/4" 1-5/8" 1-5/8" 15/37" 31/32 1-15/16" .76 ASME B107.2
J07513S 13/16" 1-5/8" 1-5/8" 1/2" 1-1/32 2" .76 ASME B107.2
J07514S 7/8" 1-3/4" 1-3/4" 35/64" 1-1/32 2" .92 ASME B107.2
J07515S 15/16" 1-13/16" 1-3/4" 19/32" 1-3/32 2-1/16" .98 ASME B107.2
J07516S 1" 2" 1-3/4" 5/8" 1-5/32 2-1/8" 1.20 ASME B107.2
J07517S 1-1/16" 2-1/8" 1-3/4" 21/32" 1-7/32 2-3/16" 1.38 ASME B107.2
J07518S 1-1/8" 2-1/4" 1-3/4" 45/64" 1-15/64 2-1/4" 1.41 ASME B107.2
J07519S 1-3/16" 2-3/8" 1-3/4" 3/4" 1-11/32 2-5/16" 1.66 ASME B107.2
J07520S 1-1/4" 2-3/8" 1-3/4" 3/4" 1-13/32 2-3/8" 1.67 ASME B107.2
J07521S 1-5/16" 2-1/2" 1-3/4" 7/8" 1-13/32 2-3/8" 1.81 ASME B107.2
J07523S 1-7/16" 2-1/2" 1-3/4" 7/8" 1-13/32" 2-3/8" 1.97 ASME B107.2


Product Weight ASME

ID No. Size (In) B C D E L lbs. Spec.
J07509T 9/16" 1" 1-5/8" 23/64" 17/32 1-7/8" .66 ASME B107.2
J07510T 5/8" 1-3/32" 1-5/8" 25/64" 9/16 1-7/8" .67 ASME B107.2
J07511T 11/16" 1-5/32" 1-5/8" 7/16" 5/8 1-15/16" .67 ASME B107.2
J07512T 3/4" 1-1/4" 1-5/8" 15/32" 11/16 1-15/16" .69 ASME B107.2
J07513T 13/16" 1-5/16" 1-5/8" 1/2" 3/4 1-15/16" .70 ASME B107.2
J07514T 7/8" 1-1/2" 1-5/8" 9/16" 13/16 2" .75 ASME B107.2
J07515T 15/16" 1-5/8" 1-5/8" 37/64" 7/8 2" .75 ASME B107.2
J07516T 1" 1-5/8" 1-5/8" 5/8" 15/16 2" .76 ASME B107.2
J07517T 1-1/16" 1-5/8" 1-5/8" 21/32" 1" 2-1/16" .78 ASME B107.2
J07518T 1-1/8" 1-3/4" 1-3/4" 29/32" 29/32" 2-3/16" .94 ASME B107.2
J07519T 1-3/16" 1-7/8" 1-3/4" 63/64" 1-3/32" 2-3/16" 1.04 ASME B107.2
J07520T 1-1/4" 2" 1-3/4" 1" 1-1/8" 2-3/16" 1.15 ASME B107.2
J07521T 1-5/16" 2-1/8" 1-3/4" 17/64" 1-3/32" 2-3/16" 1.20 ASME B107.2
J07522T 1-3/8" 2-1/8" 1-3/4" 1-1/8" 1-1/8" 2-1/4" 1.23 ASME B107.2
J07523T 1-7/16" 2-1/4" 1-3/4" 1-1/8" 1-1/8" 2-5/16" 1.41 ASME B107.2
J07524T 1-1/2" 2-3/8" 1-3/4" 1-3/16" 1-3/16" 2-3/8" 1.56 ASME B107.2
J07525T 1-9/16" 2-3/8" 1-3/4" 1-1/4" 1-1/4" 2-7/16" 1.66 ASME B107.2
J07526T 1-5/8" 2-3/8" 1-3/4" 11/4" 1-1/4" 2-7/16" 1.75 ASME B107.2
J07527T 1-11/16" 2-39/64" 1-3/4" 1-13/32" 1-13/32" 2-5/8" 1.84 ASME B107.2
J07528T 1-3/4" 2-39/64" 1-3/4" 1-13/32" 1-13/32" 2-5/8" 1.93 ASME B107.2
J07529T 1-13/16" 2-3/4" 1-3/4" 1-13/32" 1-13/32" 2-5/8" 2.01 ASME B107.2
J07530T 1-7/8" 2-3/4" 1-3/4" 1-1/2" 1-1/2" 2-13/16" 2.09 ASME B107.2
J07531T 1-15/16" 2-7/8" 1-3/4" 1-1/2" 1-1/2" 2-13/16" 2.18 ASME B107.2
J07532T 2" 3" 1-3/4" 1-1/2" 1-1/2" 2-13/16" 2.22 ASME B107.2
J07533T 2-1/16" 3" 1-3/4" 1-9/16" 1-9/16" 3-3/32" 2.28 ASME B107.2
J07534T 2-1/8" 3-1/8" 1-3/4" 1-9/16" 1-9/16" 3-3/32" 2.35 ASME B107.2
J07535T 2-3/16" 3-1/4" 1-3/4" 1-9/16" 1-9/16" 3-1/8" 2.69 ASME B107.2
J07536T 2-1/4" 3-1/4" 1-3/4" 1-21/32" 1-21/32" 3-1/4" 2.73 ASME B107.2
J07538T 2-3/8" 3-1/2" 1-3/4" 1-3/4" 1-3/4" 3-3/8" 3.45 ASME B107.2


fastener corners and distributing contact stresses over a

J07517M 17 29.2 41.3 10.9 25.2 49.0 .69 ASME B107.33M
J07518M 18 30.2 41.3 11.2 25.2 49.0 .64 ASME B107.33M
J07519M 19 30.7 41.3 11.9 25.2 49.0 .64 ASME B107.33M
J07520M 20 33.1 41.3 14.3 25.2 49.0 .64 ASME B107.33M
J07521M 21 34.7 41.3 15.9 23.6 49.0 .64 ASME B107.33M
J07522M 22 36.3 41.3 17.4 27.0 50.8 .66 ASME B107.33M
J07523M 23 41.3 41.3 17.4 27.0 50.8 .66 ASME B107.33M
J07524M 24 41.3 41.3 15.0 27.0 50.8 .71 ASME B107.33M
J07525M 25 41.3 41.3 17.4 27.0 50.8 .70 ASME B107.33M
J07526M 26 41.3 41.3 19.1 28.5 52.3 .70 ASME B107.33M
J07527M 27 41.3 41.3 20.6 28.5 52.3 .71 ASME B107.33M
J07528M 28 41.3 41.3 17.9 28.5 52.3 .93 ASME B107.33M
J07529M 29 45.4 45.4 19.7 28.5 55.4 1.01 ASME B107.33M
J07530M 30 47.6 44.4 23.6 30.8 55.4 1.03 ASME B107.33M
J07531M 31 47.6 44.4 22.2 28.6 55.4 1.06 ASME B107.33M
J07532M 32 50.8 44.4 22.2 28.8 55.4 1.08 ASME B107.33M
J07533M 33 50.8 44.4 22.2 30.2 55.4 1.1 ASME B107.33M
J07534M 34 54.0 44.4 23.8 30.2 57.2 1.27 ASME B107.33M
J07535M 35 54.0 44.4 23.8 33.3 57.2 1.26 ASME B107.33M
J07536M 36 57.2 44.4 23.8 32.4 58.7 1.39 ASME B107.33M
J07538M 38 60.3 44.4 25.4 33.6 60.2 1.57 ASME B107.33M
J07540M 40 63.5 44.4 26.2 32.3 63.5 1.7 ASME B107.33M
J07541M 41 63.5 44.4 27.0 37.6 66.5 1.86 ASME B107.33M
J07542M 42 63.5 44.4 28.6 43.2 69.9 1.92 ASME B107.33M
J07543M 43 65.1 44.4 28.6 43.2 69.9 2.06 ASME B107.33M
J07546M 46 69.9 44.4 31.8 43.2 72.9 2.39 ASME B107.33M
J07550M 50 74.7 44.4 31.8 44.9 79.2 3.16 ASME B107.33M

3/4" DRIVE DEEP LENGTH SOCKET - 4 POINT
bolts protrude.

J07513SL 13/16" 1-5/8" 1-5/8" 43/64" 3-1/16" 4" 1.75 lbs. ASME B107.2



J07509L 9/16" 1" 1-5/8" 15/32" 2-5/16" 3-1/4" 1.23 ASME B107.2
J07510L 5/8" 1-3/32" 1-5/8" 33/64" 2-5/16" 3-1/4" 1.25 ASME B107.2
J07511L 11/16" 1-5/32" 1-5/8" 9/16" 2-5/16" 3-1/4" 1.26 ASME B107.2
J07512L 3/4" 1-1/4" 1-5/8" 39/64" 2-5/16" 3-1/4" 1.26 ASME B107.2
J07513L 13/16" 1-5/16" 1-5/8" 43/64" 2-5/16" 3-1/4" 1.26 ASME B107.2
J07514L 7/8" 1-1/2" 1-5/8" 23/32" 2-5/16" 3-1/4" 1.31 ASME B107.2
J07515L 15/16" 1-5/8" 1-5/8" 25/32" 2-5/16" 3-1/4" 1.28 ASME B107.2
J07516L 1" 1-5/8" 1-5/8" 53/64" 2-5/16" 3-1/4" 1.20 ASME B107.2
J07517L 1-1/16" 1-5/8" 1-5/8" 7/8" 2-5/16" 3-1/4" 1.14 ASME B107.2
J07518L 1-1/8" 1-3/4" 1-3/4" 59/64" 2-5/16" 3-1/4" 1.51 ASME B107.2
J07519L 1-3/16" 1-7/8" 1-3/4" 31/32" 2-5/16" 3-1/4" 1.53 ASME B107.2
J07520L 1-1/4" 2" 1-3/4" 1" 2-5/16" 3-1/4" 1.69 ASME B107.2
J07521L 1-5/16" 2-1/8" 1-3/4" 1" 2-5/16" 3-1/4" 1.79 ASME B107.2
J07522L 1-3/8" 2-1/8" 1-3/4" 1" 2-5/16" 3-1/4" 1.81 ASME B107.2
J07523L 1-7/16" 2-1/4" 1-3/4" 1-1/16" 2-7/16" 3-1/2" 2.12 ASME B107.2
J07524L 1-1/2" 2-3/8" 1-3/4" 1-1/16" 2-7/16" 3-1/2" 2.36 ASME B107.2
J07525L 1-9/16" 2-3/8" 1-3/4" 1" 2-3/8" 3-13/16" 2.45 ASME B107.2
J07526L 1-5/8" 2-3/8" 1-3/4" 2-1/4" 2-5/8" 3-13/16" 2.58 ASME B107.2
J07527L 1-11/16" 2-39/64" 1-3/4" 2-1/4" 2-5/8" 3-7/8" 2.66 ASME B107.2
J07528L 1-3/4" 2-39/64" 1-3/4" 2-1/4" 2-5/8" 3-7/8" 2.74 ASME B107.2
J07529L 1-13/16" 2-3/4" 1-3/4" 2-1/4" 2-5/8" 3-7/8" 2.87 ASME B107.2
J07530L 1-7/8" 2-3/4" 1-3/4" 2-3/8" 3-3/4" 4-1/16" 3.09 ASME B107.2
J07532L 2" 3" 1-3/4" 1-1/2" 2-3/4" 4-1/16" 3.18 ASME B107.2


Product mm Weight AMSE

J07519ML 19 30.9 41.3 15.7 57.1 82.6 1.32 lbs. ASME B107.33M
J07521ML 21 34.9 41.3 20.4 57.1 82.6 1.30 lbs. ASME B107.33M
J07522ML 22 36.5 41.3 20.7 57.1 82.6 1.20 lbs. ASME B107.33M
J07523ML 23 41.3 41.3 19.1 57.1 82.6 1.20 lbs. ASME B107.33M
J07524ML 24 41.3 41.3 20.7 57.1 82.6 1.31 lbs. ASME B107.33M
J07525ML 25 41.3 41.3 21.0 57.1 0.69 1.29 lbs. ASME B107.33M
J07526ML 26 41.3 41.3 21.5 57.1 82.6 1.20 lbs. ASME B107.33M
J07527ML 27 41.3 41.3 22.2 57.1 82.6 1.14 lbs. ASME B107.33M
J07530ML 30 47.6 44.4 24.8 58.0 82.6 1.45 lbs. ASME B107.33M
J07531ML 31 41.6 44.4 25.2 58.0 82.6 1.10 lbs. ASME B107.33M
J07532ML 32 50.8 44.4 25.4 58.0 82.6 1.63 lbs. ASME B107.33M
J07533ML 33 50.8 44.4 25.4 58.0 82.6 1.55 lbs. ASME B107.33M
J07534ML 34 54.0 44.4 25.4 58.0 82.6 1.60 lbs. ASME B107.33M
J07535ML 35 54.0 44.4 25.4 58.0 82.6 1.89 lbs. ASME B107.33M
J07536ML 36 57.2 44.4 25.4 58.0 82.6 1.91 lbs. ASME B107.33M
J07537ML 37 58.2 44.4 25.4 62.5 88.9 1.96 lbs. ASME B107.33M
J07538ML 38 60.3 44.4 27.0 62.5 88.9 2.10 lbs. ASME B107.33M
J07541ML 41 63.5 44.4 27.0 62.5 88.9 2.36 lbs. ASME B107.33M
J07543ML 43 65.1 44.4 28.6 62.5 88.9 2.52 lbs. ASME B107.33M
J07546ML 46 66.2 44.4 28.6 62.5 88.9 2.64 lbs. ASME B107.33M
J07550ML 50 77.3 47.6 32.2 67.4 96.0 2.98 lbs. ASME B107.33M

3/4" DRIVE DEEP LENGTH THIN WALL SOCKETS - 6 POINT


J07512-LT 3/4" 1-3/8" 1-3/8" 39/64" 3-1/16" 4" 1.04 lbs. ASME B107.2
J07513-LT 13/16" 1-3/8" 1-3/8" 21/32" 3-1/16" 4" 1.02 lbs. ASME B107.2
J07514-LT 7/8" 1-3/8" 1-3/8" 23/32" 3-1/16" 4" 1.01 lbs. ASME B107.2
J07515-LT 15/16" 1-3/8" 1-3/8" 49/64" 3-1/16" 4" 0.89 lbs. ASME B107.2
J07516-LT 1" 1-7/16" 1-7/16" 53/64" 3-1/16" 4" 1.06 lbs. ASME B107.2
J07517-LT 1-1/16" 1-1/2" 1-1/2" 7/8" 3-1/16" 4" 0.96 lbs. ASME B107.2
J07518-LT 1-1/8" 1-5/8" 1-5/8" 59/64" 3-1/16" 4" 1.19 lbs. ASME B107.2
J07519-LT 1-3/16" 1-11/16" 1-11/16" 31/32" 3-1/16" 4" 1.24 lbs. ASME B107.2
J07520-LT 1-1/4" 1-3/4" 1-3/4" 1" 3-1/16" 4" 1.33 lbs. ASME B107.2
J07521-LT 1-5/16" 1-7/8" 1-3/4" 1-1/8" 2-5/16" 3-1/4" 1.28 lbs. ASME B107.2
J07522-LT 1-3/8" 1-15/16" 1-3/4" 1-1/8" 2-5/16" 3-1/4" 1.32 lbs. ASME B107.2
J07523-LT 1-7/16" 2" 1-3/4" 1-1/8" 2-9/16" 3-1/2" 1.42 lbs. ASME B107.2
J07524-LT 1-1/2" 2-1/8" 1-3/4" 1-1/4" 2-9/16" 3-1/2" 1.62 lbs. ASME B107.2
3/4" DRIVE HEX BITS
Product in. Weight

ID No. lbs.
J075909/16 9/16" 1-3/8" 3-3/4" 0.96 lbs. J07590 9/16RK
J075905/8 5/8" 1-15/32" 3-27/32" 1.11 lbs. J07590 5/8RK
J075903/4 3/4" 1-7/8" 4-3/8" 1.75 lbs. J07590 3/4RK
J07597/8 7/8" 2-7/32" 4-3/4" 2.09 lbs. J07590 7/8RK
J075901 1" 2-33/64" 5-13/64" 2.59 lbs. J07590 1RK
3/4" DR. HEX BIT REPLACEMENTS
Product Weight
ID No. Description lbs.
J1404MRKA Repair Kit Hex Bit 3/4" Drive 4 mm 0.01 lbs.


Product Weight ASME

ID No. L lbs. Spec.
J07570 4-1/64" 1.57 ASME B107.2
3/4" DRIVE BUDD WHEEL DEEP LENGTH IMPACT SOCKET - DOUBLE OPENING
Product in. in. Weight

ID No. B C L lbs.
J07524-LS 1-1/2" 3/4" 2-1/4" 1-5/8" 4" 2.96 lbs.

Product Weight ASME
ID No. L lbs. Spec.
J07565 5" 1.60 ASME B107.2
J07567 7" 2.06 ASME B107.2
J07568 10" 2.71 ASME B107.2
J07569 13" 3.35 ASME B107.2
3/4" DRIVE ADAPTERS

ID No. L lbs. Spec.
J07655 3/4" F x 1" M 2-1/2" 2.55 ASME B107.2
J07656 1"F x 3/4"M 2-7/8" 1.41 ASME B107.2
J7656 5/8"F x 3/4"M 1-31/32" .41 ASME B107.2

3/4" DRIVE “O” RING FOR IMPACT SOCKETS AND ATTACHMENTS
Product Weight
ID No. Drive Size Use With lbs.
J07500R 3/4 Inch All 3/4" drive impact sockets 0.01 lbs.
and attachments
3/4" DRIVE RETAINING PIN FOR IMPACT SOCKETS AND ATTACHMENTS
Product Weight
J07500P 3/4 Inch All 3/4" drive impact sockets 0.01 lbs.
and attachments
3/4" DRIVE RETAINING RINGS
• Retaining rings are used to help secure sockets onto drive

tools. They are not intended to bear any load. The rotational
forces are between the drive tool and the socket.
• Designed with a resin crush gauge to help indentify when to
replace worn sockets.
• The resin crush gauge on the pin helps indicate when a socket
is excessively worn and should be replaced.
• Drive tool and socket should line up when in use and should
not pinch the crush gauge.
• Cracked sockets and or worn drive tools cause each other to
turn excessively in relation to each other. This action pinches
the small fin or the crush gauge on these retaining rings. If the
crush gauge is pinched, it is an indication that the socket and
or the drive tool need to be replaced.
• One piece construction, no loose parts. Pin is made of resin
which allows the material to compress without breaking.
Product Weight
JRR07520 1-1/4 GRV 1-7/16" 1-7/16" 3/16" 0.009
JRR07523 1-7/16 GRV 1-5/8" 1-5/8" 3/16" 0.010
JRR07526 3/4 Drive 1-5/8 GRV 1-13/16" 1-13/16" 3/16" 0.011
JRR07528 1-3/4 GRV 1-15/16" 1-15/16" 3/16" 0.011
JRR07532 2 GRV 2-3/16" 2-3/16" 3/16" 0.012
JRR07534 2-1/8 GRV 2-5/16" 2-5/16" 3/16" 0.013
JRR07536 2-1/4 GRV 2-7/16" 2-7/16" 3/16" 0.014

1" DRIVE STANDARD LENGTH SOCKET - 4 POINT / 8 POINT
chamfer make it esy to position socket on fasteners.
and bolts protrude.
Retaining Ring or pin and O-ring to help secure the socket to the
drive tool anvil.
Product in. Weight
J10012SS 3/4" 1-7/8" 2-1/8" 5/8" 1-3/8" 2-1/2" 1.70
J10013SS 13/16" 1-15/16" 2-1/8" 5/8" 1-3/8" 2-1/2" 1.76
J10014SS 7/8" 2" 2-1/8" 5/8" 1-3/8" 2-1/2" 1.76
J10015SS 15/16" 2-1/16" 2-1/8" 19/32" 1-3/8" 2-1/2" 1.74
J10016SS 1" 2-1/8" 2-1/8" 11/16" 1-3/8" 2-1/2" 1.74
J10018SS 1-1/8" 2-3/8" 2-3/8" 23/32" 1-3/8" 2-1/2" 1.69
J10024SS 1-1/2" 2-5/8" 2-5/8" 25/32" 1-3/8" 2-1/2" 1.80
J10014S 7/8" 2" 2" 5/8" 1-3/8" 2-5/8" 1.33
J10015S 15/16" 2" 2" 5/8" 1-3/8" 2-5/8" 1.52
J10016S 1" 2-3/32" 2-3/32" 11/16" 1-3/8" 2-13/16" 1.61
J10018S 1-1/8" 2-7/16" 2-7/16" 23/32" 1-3/8" 2-13/16" 1.83
J10019S 1-3/16" 2-7/16" 2-7/16" 23/32" 1-3/8" 13/16" 1.74
J10020S 1-1/4" 2-7/16" 2-7/16" 11/16" 1-1/2" 2-13/16" 1.92
J10021S 1-5/16" 2-1/2" 2-1/2" 25/32" 1-1/2" 2-13/16" 2.07
J10022S 1-3/8" 2-1/2" 2-1/2" 25/32" 1-5/8" 2-13/16" 1.97
J10023S 1-7/16" 2-13/16" 2-13/16" 13/16" 1-5/8" 2-15/16" 2.54
J10024S 1-1/2" 2-13/16" 2-13/16" 13/16" 1-5/8" 2-13/16" 2.47
J10026S 1-5/8" 3-3/32" 3-3/32" 13/16" 1-5/8" 3-1/2" 3.81
J10027S 1-11/16" 3-3/16" 3-3/16" 7/8" 1-3/4" 3-1/2" 4.06
J10028S 1-3/4" 3-3/16" 3-3/16" 7/8" 1-3/4" 3-1/2" 4.12
J10029S 1-13/16" 3-3/8" 3-3/8" 7/8" 1-7/8" 3-1/2" 4.29
J10030S 1-7/8" 3-13/32" 3-13/32" 15/16" 1-7/8" 3-1/2" 4.17
J10032S 2" 3-1/2" 3-1/2" 1" 1-15/16" 3-1/2" 4.42
J10035S 2-3/16" 3-7/8" 3-7/8" 1" 1-15/16" 3-1/2" 5.28

1" DRIVE STANDARD LENGTH SOCKETS - 6 POINT
• Proto® 6 Point Impact Sockets are ideal for use on stubborn or damaged fasteners,
and also on fasteners made from soft materials.
• The TorquePlus™ design is a high performance drive configuration which allows for
quick and easy socket engagement to the fastener flats, not the corners.
• The TorquePlus™ configuration employs a radius-corner design, shifting contact area
and stress away from the fastener corners and distributing contact stresses over a
• The TorquePlus™ internal design minimizes fastener rounding, helps to extend fastener
life, and allows the user to more easily turn worn, rounded, or rusted fasteners.

J10012 3/4" 1-7/16" 2-1/8" 19/32" 1-5/16" 2-7/16" 1.48 ASME B107.2
J10013 13/16" 1-1/2" 2-1/8" 5/8" 1-3/8" 2-1/2" 1.50 ASME B107.2
J10014 7/8" 1-17/32" 2-1/8" 21/32" 1-3/8" 2-1/2" 1.50 ASME B107.2
J10015 15/16" 1-39/64" 2-1/8" 19/32" 1-3/8" 2-1/2" 1.62 ASME B107.2
J10016 1" 1-3/4" 2-1/8" 3/4" 1-3/8" 2-1/2" 1.62 ASME B107.2
J10017 1-1/16" 1-3/4" 2-1/8" 7/8" 1-1/2" 2-5/8" 1.72 ASME B107.2
J10018 1-1/8" 1-13/16" 2-1/8" 7/8" 1-1/2" 2-5/8" 1.70 ASME B107.2
J10019 1-3/16" 1-7/8" 2-1/8" 7/8" 1-1/2" 2-5/8" 1.66 ASME B107.2
J10020 1-1/4" 2-1/8" 2-1/8" 15/16" 1-1/2" 2-5/8" 1.69 ASME B107.2
J10021 1-5/16" 2-1/8" 2-1/8" 15/16" 1-5/8" 2-3/4" 1.75 ASME B107.2
J10022 1-3/8" 2-1/8" 2-1/8" 1-1/32" 1-5/8" 2-3/4" 1.70 ASME B107.2
J10023 1-7/16" 2-1/8" 2-1/8" 1-1/32" 1-5/16" 2-7/16" 1.55 ASME B107.2
J10024 1-1/2" 2-3/8" 2-3/8" 1-1/4" 1-1/2" 2-5/8" 2.04 ASME B107.2
J10025 1-9/16" 2-3/8" 2-3/8" 1-1/4" 1-1/2" 2-5/8" 1.98 ASME B107.2
J10026 1-5/8" 2-15/32" 2-3/8" 1-1/4" 1-1/2" 2-5/8" 1.97 ASME B107.2
J10027 1-11/16" 2-39/64" 2-3/8" 1-1/8" 1-11/16" 2-13/16" 2.37 ASME B107.2
J10028 1-3/4" 2-11/16" 2-3/8" 1-1/8" 1-11/16" 2-13/16" 2.37 ASME B107.2
J10029 1-13/16" 2-51/64" 2-3/8" 1-1/8" 1-1/16" 2-13/16" 2.55 ASME B107.2
J10030 1-7/8" 2-51/64" 2-3/8" 1-1/4" 1-7/8" 3" 2.63 ASME B107.2
J10031 1-15/16" 2-7/8" 2-3/8" 1-1/4" 1-7/8" 3" 2.82 ASME B107.2
J10032 2" 3" 2-3/8" 1-1/4" 1-7/8" 3" 3.12 ASME B107.2
J10033 2-1/16" 3" 2-3/8" 1-9/16" 1-9/16" 3-3/32" 3.06 ASME B107.2
J10034 2-1/8" 3-1/8" 2-3/8" 1-3/8" 1-9/16" 3-3/32" 3.25 ASME B107.2
J10035 2-3/16" 3-1/4" 2-3/8" 1-3/8" 1-9/16" 3-1/8" 3.59 ASME B107.2
J10036 2-1/4" 3-5/16" 2-3/8" 1-1/2" 1-21/32" 3-1/4" 3.63 ASME B107.2
J10037 2-5/16" 3-7/16" 2-3/8" 1-1/2" 1-23/32" 3-21/64" 4.23 ASME B107.2
J10038 2-3/8" 3-1/2" 2-3/8" 1-1/2" 1-3/4" 3-3/8" 4.35 ASME B107.2
J10039 2-7/16" 3-1/2" 2-3/8" 1-5/8" 1-3/4" 3-25/64" 4.05 ASME B107.2
J10040 2-1/2" 3-5/8" 2-3/8" 1 -5/8" 1-13/16" 3-1/2" 4.55 ASME B107.2
J10041 2-9/16" 3-47/64" 2-3/8" 1-5/8" 1-13/16" 3-1/2" 4.93 ASME B107.2
J10042 2-5/8" 3-3/4" 2-3/8" 1-3/4" 1-15/16" 3-5/8" 4.93 ASME B107.2
J10043 2-11/16" 3-7/8" 2-3/8" 1-3/4" 1-15/16" 3-21/32" 5.10 ASME B107.2
J10044 2-3/4" 3-7/8" 2-3/8" 1-3/4" 2" 3-3/4" 5.43 ASME B107.2
J10045 2-13/16" 4" 2-3/8" 1-7/8" 2-3/64" 3-13/16" 5.50 ASME B107.2
J10046 2-7/8" 4-1/16" 2-3/8" 1-7/8" 2-5/64" 3-7/8" 5.40 ASME B107.2
J10047 2-15/16" 4-1/8" 2-3/8" 1-7/8" 2-1/16" 3-7/8" 5.40 ASME B107.2
J10048 3" 4-1/4" 2-3/8" 2" 2-3/16" 4" 6.59 ASME B107.2
J10050 3-1/8" 4-3/8" 2-3/8" 2" 2-3/16" 4-1/16" 6.93 ASME B107.2
J10052 3-1/4" 4-1/2" 2-3/8" 2" 2-15/32" 4-3/8" 7.43 ASME B107.2
J10054 3-3/8" 4-9/16" 2-3/8" 2-1/4" 2-15/32" 4-7/16" 7.58 ASME B107.2
J10056 3-1/2" 4-3/4" 2-3/8" 2-1/4" 2-1/2" 4-1/2" 8.06 ASME B107.2
J10058 3-5/8" 4-7/8" 2-3/8" 2-1/4" 2-35/64" 4-3/4" 8.95 ASME B107.2
J10062 3-7/8" 5-1/16" 2-3/8" 2-1/4" 2-31/32" 5" 9.02 ASME B107.2
J10064 4" 5-3/4" 2-3/8" 2-1/2" 4-3/8" 5-1/2" 15.06 ASME B107.2
J10066 4-1/8" 6" 2-3/8" 2-3/4" 4-5/8" 5-1/2" 17.08 ASME B107.2
J10068 4-1/4" 6" 2-3/8" 2-3/4" 4-5/8" 5-1/2" 15.96 ASME B107.2
J10072 4-1/2" 6-1/4" 2-3/8" 3" 4-7/8" 6" 17.38 ASME B107.2

1" DRIVE METRIC STANDARD LENGTH SOCKETS - 6 POINT


ID No B C D E L lbs. Spec.
J10019M 19 36.5 53.9 15.6 22.8 61.0 1.58 ASME B107.33M
J10022M 22 39.2 53.9 16.6 25.4 61.0 1.58 ASME B107.33M
J10024M 24 40.8 53.9 19.1 25.4 61.0 1.58 ASME B107.33M
J10026M 26 43.2 50.8 28.6 38.1 60.2 1.16 ASME B107.33M
J10027M 27 44.8 53.9 22.3 30.5 66.0 1.60 ASME B107.33M
J10028M 28 46.2 53.9 22.3 30.5 66.0 1.65 ASME B107.33M
J10029M 29 45.7 53.9 33.0 37.6 66.0 1.65 ASME B107.33M
J10030M 30 47.6 53.9 22.3 30.5 66.0 1.65 ASME B107.33M
J10032M 32 53.9 53.9 23.8 30.5 66.0 1.68 ASME B107.33M
J10033M 33 53.9 53.9 25.4 31.8 69.9 1.75 ASME B107.33M
J10035M 35 55.9 53.9 35.6 30.5 68.6 1.75 ASME B107.33M
J10036M 36 57.2 53.9 21.6 30.5 61.9 1.87 ASME B107.33M
J10038M 38 60.9 60.9 35.6 31.8 68.6 1.90 ASME B107.33M
J10041M 41 63.3 61.3 28.4 31.8 71.6 1.95 ASME B107.33M
J10046M 46 70.5 61.3 33.3 35.6 71.6 2.61 ASME B107.33M
J10050M 50 76.2 61.3 36.6 38.1 76.2 3.35 ASME B107.33M
J10054M 54 78.7 61.3 40.6 38.1 76.2 3.52 ASME B107.33M
J10055M 55 82.5 61.3 39.6 39.6 79.2 3.62 ASME B107.33M
J10058M 58 88.9 62.1 42.4 61.3 81.2 3.85 ASME B107.33M
J10060M 60 95.2 61.3 39.6 46.5 85.8 4.58 ASME B107.33M
J10063M 63 95.2 61.3 39.6 46.0 85.8 4.67 ASME B107.33M
J10065M 65 95.2 61.3 39.6 46.0 88.9 4.83 ASME B107.33M
J10067M 67 95.3 69.9 50.8 59.2 88.9 4.93 ASME B107.33M
J10070M 70 96.8 69.9 45.2 57.2 97.3 5.02 ASME B107.33M
J10075M 75 101.6 69.9 55.8 68.3 97.6 6.15 ASME B107.33M
J10080M 80 106.7 69.9 59.2 71.6 101.6 6.59 ASME B107.33M

1" DRIVE DEEP LENGTH SOCKETS - 6 POINT

Product in. ASME

ID No. B C D E L Weight lbs. Spec.
J10014L 7/8" 1-35/64" 2-1/8" 21/32" 2-5/8" 3-3/4" 2.45 ASME B107.2
J10015L 15/16" 1-39/64" 2-1/8" 49/64" 2-5/8" 3-3/4" 2.64 ASME B107.2
J10016L 1" 1-3/4" 2-1/8" 3/4" 2-5/8" 3-3/4" 2.66 ASME B107.2
J10017L 1-1/16" 1-3/4" 2-1/8" 7/8" 2-5/8" 3-3/4" 2.54 ASME B107.2
J10018L 1-1/8" 1-13/16" 2-1/8" 7/8" 2-5/8" 3-3/4" 2.53 ASME B107.2
J10019L 1-3/16" 1-7/8" 2-1/8" 7/8" 2-5/8" 3-3/4" 2.32 ASME B107.2
J10020L 1-1/4" 2-1/8" 2-1/8" 15/16" 2-5/8" 3-3/4" 2.55 ASME B107.2
J10021L 1-5/16" 2-1/8" 2-1/8" 1" 2-5/8" 3-3/4" 2.45 ASME B107.2
J10022L 1-3/8" 2-1/8" 2-1/8" 1-1/32" 2-5/8" 3-3/4" 2.38 ASME B107.2
J10023L 1-7/16" 2-1/8" 2-1/8" 1-3/8" 2-5/32" 4" 2.52 ASME B107.2
J10024L 1-1/2" 2-3/8" 2-3/8" 1-3/8" 2-5/32" 4" 2.80 ASME B107.2
J10025L 1-9/16" 2-3/8" 2-3/8" 2" 2-3/8" 4" 2.89 ASME B107.2
J10026L 1-5/8" 2-3/8" 2-3/8" 2-1/4" 2-53/64" 4" 2.73 ASME B107.2
J10027L 1-11/16" 2-39/64" 2-3/8" 2-1/4" 2-53/64" 4-1/6" 3.45 ASME B107.2
J10028L 1-3/4" 2-39/64" 2-3/8" 2-1/4" 2-53/64" 4-1/16" 3.31 ASME B107.2
J10029L 1-13/16" 2-3/4" 2-3/8" 2-1/4" 2-53/64" 4-1/16" 3.65 ASME B107.2
J10030L 1-7/8" 2-3/4" 2-3/8" 2-3/8" 2-3/4" 4-1/4" 3.74 ASME B107.2
J10031L 1-15/16" 2-7/8" 2-3/8" 2-3/8" 2-3/4" 4-1/4" 4.05 ASME B107.2
J10032L 2" 3" 2-3/8" 2-3/8" 2-3/4" 4-1/4" 4.31 ASME B107.2
J10033L 2-1/16" 3-1/8" 2-3/8" 2-9/16" 2-3/4" 4-1/4" 4.52 ASME B107.2
J10034L 2-1/8" 3-1/8" 2-3/8" 2-19/32" 2-31/32" 4-1/2" 4.78 ASME B107.2
J10035L 2-3/16" 3-1/4" 2-3/8" 2-9/16" 2-15/16" 4-1/2" 5.19 ASME B107.2
J10036L 2-1/4" 3-1/4" 2-3/8" 2-17/32" 2-29/32" 4-1/2" 4.98 ASME B107.2
J10037L 2-5/16" 3-1/2" 2-3/8" 2-17/32" 2-29/32" 4-3/4" 5.92 ASME B107.2
J10038L 2-3/8" 3-1/2" 2-3/8" 2-3/4" 3-1/8" 4-3/4" 8.06 ASME B107.2
J10039L 2-7/16" 3-9/16" 2-3/8" 3-7/8" 3-3/16" 4-7/8" 5.82 ASME B107.2
J10040L 2-1/2" 3-5/8" 2-3/8" 3" 3-1/4" 4-7/8" 6.02 ASME B107.2
J10041L 2-9/16" 3-5/8" 2-3/8" 3-1/8" 3-5/16" 5" 6.33 ASME B107.2
J10042L 2-5/8" 3-3/4" 2-3/8" 3-1/16" 3-7/16" 5" 6.75 ASME B107.2
J10044L 2-3/4" 3-7/8" 2-3/8" 3-1/16" 3-1/2" 5" 7.10 ASME B107.2

1" DRIVE EXTENSIONS

• Male square is oriented in line with female squares for use with
fixed head torque wrenches.
Product Weight ASME
ID No. L lbs. Spec.
J10607 7-3/8" 3.64 ASME B107.2
J10608 10" 4.59 ASME B107.2
J10609 13" 5.94 ASME B107.2
1" DRIVE BUDD WHEEL DEEP LENGTH IMPACT SOCKET - DOUBLE OPENING
• Double opening: 13/16" square threads studs onto wheel,

1-1/2" hex tightens lug nuts.
Product in. in. Weight
ID No. B C L lbs.
J10024LS 1-1/2" 1" 2-3/8" 2-3/8" 4" 3.80 lbs.
1" DRIVE UNIVERSAL JOINT

Ret Ring® Retaining Ring or pin and O-ring to help secure the
socket to the drive tool anvil.
Product Weight ASME
ID No L lbs. Spec.
J10670 5-3/8" 3.98 ASME B107.2

1" DRIVE ADAPTER

ID No. L lbs. Spec.
J07655 3/4" F x 1" M 2-1/2" 2.55 ASME B107.2
J15007 1-1/2" F x 1" M 4-3/16" 5.08 ASME B107.2
1" DRIVE ADAPTER - MALE SPLINE

Product F M Weight
ID No. L lbs.
J10005 1" SQ. F x #5 SPL. M 4-1/2" 2.58
1" DRIVE RETAINING RINGS
• Large drive size crush gauge retaining ring.

• Part numbers are embossed on the rings
near the point at which the pin and ring meet.
Product Weight
JRR10028 1-3/4 GRV 1-15/16" 1-15/16" 3/16" .015
JRR10032 2 GRV 2-3/16" 2-3/16" 3/16" .020
JRR10034 2-1/8 GRV 2-5/16" 2-5/16" 3/16" .020
JRR10036 2-1/4 GRV 2-7/16" 2-7/16" 3/16" .020
JRR10040 2-1/2" GRV 2-11/16" 2-11/16" 3/16" .020
JRR10042 2-5/8 GRV 2-13/16" 2-13/16" 3/16" .020

1" DRIVE “O” RINGS FOR IMPACT SOCKETS AND ATTACHMENTS
• "O" Ring for impact sockets with a 1" Drive.

Product Weight
J10012 thru J10023
J10019M thru J10036M
J10012SS thru J10018SS
J10013L thru J10023L
J100185, J10017-LT, J10020-LT, J10607,
J10000R1 1 Inch J10608, J10609 0.01 lbs.
J10024 thru J10072

J10024LS, J10670
J10000R2 1 Inch J10004, J10005 0.01 lbs.
1" DRIVE RETAINING PINS FOR IMPACT SOCKETS AND ATTACHMENTS
• Use for a variety of impact sockets and attachments.
Product Weight
J10012 thru J10023
J10012SS thru J1001SS
J10000P1 1 Inch
J10018S, J10017-LT, J10020-LT, J10607,
J10608, J10609 0.01 lbs.
J10024 thru J10072
J10000P2 1 Inch J10041M thru J10065M
J10024LS, J10670, J10004, J10005 0.01 lbs.

1-1/2" DRIVE STANDARD LENGTH SOCKETS - 6 POINT


J15021 1-5/16" 2-3/4" 3-1/4" 3/4" 1-3/8" 3-1/8" 4.70 ASME B107.2
J15022 1-3/8" 2-19/32" 3-1/4" 7/8" 1-1/2" 3-1/8" 4.40 ASME B107.2
J15023 1-7/16" 2-19/32" 3-1/4" 7/8" 1-1/2" 3-1/8" 4.46 ASME B107.2
J15024 1-1/2" 2-19/32" 3-1/4" 15/16" 1-1/2" 3-1/8" 4.35 ASME B107.2
J15025 1-9/16" 2-3/4" 3-1/4" 31/32" 1-1/2" 3-1/8" 4.26 ASME B107.2
J15026 1-5/8" 2-7/8" 3-1/4" 31/32" 1-1/2" 3-1/8" 6.00 ASME B107.2
J15027 1-11/16" 2-7/8" 3-1/4" 1-1/16" 1-19/32" 3-15/64" 4.67 ASME B107.2
J15028 1-3/4" 2-15/16" 3-1/4" 1-3/32" 1-21/32" 3-11/32" 4.86 ASME B107.2
J15029 1-13/16" 3" 3-1/4" 1-1/8" 1-21/32" 3-11/32" 4.92 ASME B107.2
J15030 1-7/8" 3" 3-1/4" 1-3/16" 1-45/64" 3-11/32" 4.83 ASME B107.2
J15031 1-15/16" 3" 3-1/4" 1-1/8" 2" 3-5/8" 5.36 ASME B107.2
J15032 2" 3-1/4" 3-1/4" 1-1/4" 1-13/32" 3-5/8" 5.44 ASME B107.2
J15033 2-1/16" 3-1/4" 3-1/4" 1-9/32" 1-11/16" 3-5/8" 5.33 ASME B107.2
J15034 2-1/8" 3-1/2" 3-1/4" 1-11/32" 1-43/64" 3-5/8" 6.4 ASME B107.2
J15035 2-3/16" 3-1/2" 3-1/4" 1-3/8" 1-21/32" 3-5/8" 5.63 ASME B107.2
J15036 2-1/4" 3-1/2" 3-1/4" 1-1/2" 1-3/4" 3-3/4" 6.13 ASME B107.2
J15037 2-5/16" 3-3/2" 3-1/4" 1-1/2" 1-53/64" 3-7/8" 6.49 ASME B107.2
J15038 2-3/8" 3-1/4" 3-1/4" 1-9/16" 1-55/64" 3-7/8" 5.96 ASME B107.2
J15039 2-7/16" 3-3/4" 3-1/4" 1-9/16" 1-15/16" 3-7/8" 8.64 ASME B107.2
J15040 2-1/2" 3-3/4" 3-1/4" 1-5/8" 1-59/64" 4" 6.67 ASME B107.2
J15041 2-9/16" 3-3/4" 3-1/4" 1-5/8" 1-29/32" 4" 8.36 ASME B107.2
J15042 2-5/8" 4-1/8" 3-1/4" 1-5/8" 2" 4-1/8" 10.58 ASME B107.2
J15043 2-11/16" 4-1/8" 3-1/4" 1-3/4" 2-7/64" 4-1/4" 8.00 ASME B107.2
J15044 2-3/4" 4-1/4" 3-1/4" 1-3/4" 2-5/64" 4-1/4" 8.63 ASME B107.2
J15045 2-13/16" 4-1/4" 3-1/4" 1-7/8" 2-3/16" 4-3/8" 9.83 ASME B107.2
J15046 2-7/8" 4-1/2" 3-1/4" 1-7/8" 2-11/64" 4-3/8" 9.77 ASME B107.2
J15047 2-15/16" 4-1/2" 3-1/4" 2" 2-17/16" 4-1/2" 9.58 ASME B107.2
J15048 3" 4-1/2" 3-1/4" 2" 2-1/4" 4-1/2" 10.80 ASME B107.2
J15049 3-1/16" 4-3/4" 3-1/4" 2" 2-23/64" 4-5/8" 10.93 ASME B107.2
J15050 3-1/8" 4-3/4" 3-1/4" 2" 2-23/64" 4-5/8" 10.87 ASME B107.2
J15051 3-3/16" 4-3/4" 3-1/4" 2" 2-9/16" 4-23/32" 12.62 ASME B107.2
J15052 3-1/4" 5" 3-1/4" 2" 2-35/64" 4-23/32" 12.80 ASME B107.2
J15053 3-5/16" 5" 3-1/4" 2" 2-31/64" 4-23/32" 11.24 ASME B107.2
J15054 3-3/8" 5" 3-1/4" 2" 2-33/64" 4-23/32" 11.88 ASME B107.2

1-1/2" DRIVE STANDARD LENGTH SOCKETS - 6 POINT (CONTINUED)

J15055 3-7/16" 5" 3-1/4" 2" 39/64" 4-31/32" 11.81 ASME B107.2
J15056 3-1/2" 5-1/8" 3-1/4" 2-1/4" 2-37/64" 4-31/32" 12.61 ASME B107.2
J15057 3-9/16" 5-1/8" 3-1/4" 2-1/4" 2-9/16" 5" 13.22 ASME B107.2
J15058 3-5/8" 5-1/8" 3-1/4" 2-1/4" 2-35/64" 5" 13.62 ASME B107.2
J15059 3-11/16" 5-1/8" 3-1/4" 2-1/4" 2-33/64" 5" 18.87 ASME B107.2
J15060 3-3/4" 5-1/2" 3-1/4" 2-1/4" 2-1/2" 5" 13.20 ASME B107.2
J15061 3-13/16" 5-1/2" 3-1/4" 2-1/4" 2-31/64" 5" 14.40 ASME B107.2
J15062 3-7/8" 5-1/2" 3-1/4" 2-1/4" 2-31/32" 5-1/2" 13.46 ASME B107.2
J15063 3-15/16" 5-3/4" 3-1/4" 2-1/2" 2-15/16" 5-1/2" 22.87 ASME B107.2
J15064 4" 5-3/4" 3-1/4" 2-1/2" 2-59/64" 5-1/2" 16.26 ASME B107.2
J15065 4-1/16" 5-3/4" 3-1/4" 2-3/4" 2-29/32" 5-1/2" 15.27 ASME B107.2
J15066 4-1/8" 6" 3-1/4" 2-3/4" 3-1/8" 5-3/4" 17.78 ASME B107.2
J15067 5" 6-11/16" 3-3/4" 3-1/8" 4-5/8" 6-1/4" 25.30 ASME B107.2
J15068 4-1/4" 6" 3-1/4" 2-3/4" 3-5/64" 5-3/4" 17.32 ASME B107.2
J15069 4-5/16" 6" 3-1/4" 2-3/4" 3-1/16" 5-3/4" 19.22 ASME B107.2
J15070 4-3/8" 6-1/4" 3-1/4" 2-3/4" 3-3/64" 5-3/4" 19.65 ASME B107.2
J15071 4-7/16" 6-1/4" 3-1/4" 3" 3-17/64" 6" 18.87 ASME B107.2
J15072 4-1/2" 6-1/4" 3-1/4" 3" 3-1/4" 6" 18.87 ASME B107.2
J15074 4-5/8" 6-1/2" 3-1/4" 3" 3-15/32" 6-1/4" 20.86 ASME B107.2
J15076 4-3/4" 6-1/2" 3-1/4" 3" 3-27/64" 6-1/4" 20.84 ASME B107.2
J15080 5" 6-3/4" 3-1/2" 3" 3-1/2" 6-3/4" 25.16 ASME B107.2
1-1/2" DRIVE METRIC STANDARD LENGTH SOCKETS - 6 POINT

Product mm Weight
J15036M 36 69.9 82.6 22.2 34.9 81 4.60
J15038M 38 73.0 82.6 22.2 36.5 82.6 4.80
J15041M 41 76.2 82.6 25.4 41.3 82.6 5.20
J15046M 46 79.4 82.6 28.6 44.5 85.7 5.30
J15050M 50 82.6 82.6 30.2 54.0 95.3 6.20
J15055M 55 85.7 85.7 33.3 55.6 98.4 6.70
J15060M 60 92.1 92.1 34.9 60.3 101.6 7.90
J15065M 65 98.4 98.4 38.1 63.5 106.4 9.30
J15070M 70 103.2 95.3 41.3 69.9 111.1 10.60
J15075M 75 109.5 95.3 44.5 73.0 114.3 11.20

1-1/2" DRIVE DEEP LENGTH SOCKETS - 6 POINT


J15021L 1-5/16" 2-3/4" 3-1/4" 13/16" 4" 5-11/16" 10.30 ASME B107.2
J15022L 1-3/8" 2-19/32" 3-1/4" 7/8" 4-1/8" 5-3/4" 7.36 ASME B107.2
J15023L 1-7/16" 2-19/32" 3-1/4" 7/8" 4-1/8" 5-3/4" 9.00 ASME B107.2
J15024L 1-1/2" 2-19/32" 3-1/4" 15/16" 4-1/8" 5-3/4" 9.19 ASME B107.2
J15025L 1-9/16" 2-7/8" 3-1/4" 31/32" 4-1/8" 5-3/4" 9.20 ASME B107.2
J15026L 1-5/8" 2-7/8" 3-1/4" 31/32" 4-1/8" 5-3/4" 9.31 ASME B107.2
J15027L 1-11/16" 2-7/8" 3-1/4" 1-1/16" 4-1/8" 5-3/4" 9.32 ASME B107.2
J15028L 1-3/4" 2-15/16" 3-1/4" 1-3/32" 4-1/8" 5-3/4" 9.09 ASME B107.2
J15029L 1-13/16" 3-1/8" 3-1/4" 1-1/8" 4-1/8" 5-3/4" 9.41 ASME B107.2
J15030L 1-7/8" 3-1/8" 3-1/4" 1-3/16" 4-1/8" 5-3/4" 9.00 ASME B107.2
J15031L 1-15/16" 3-1/8" 3-1/4" 1-1/8" 4-1/8" 5-3/4" 9.01 ASME B107.2
J15032L 2" 3-1/4" 3-1/4" 1-21/32" 3-53/64" 5-3/4" 8.94 ASME B107.2
J15033L 2-1/16" 3-1/4" 3-1/4" 1-45/64" 3-13/16" 5-3/4" 8.68 ASME B107.2
J15034L 2-1/8" 3-1/2" 3-1/4" 1-3/4" 3-57/64" 5-3/4" 10.00 ASME B107.2
J15035L 2-3/16" 3-1/2" 3-1/4" 1-51/64" 3-57/64" 5-3/4" 8.82 ASME B107.2
J15036L 2-1/4" 3-1/2" 3-1/4" 1-27/32" 3-57/64" 5-7/8" 8.87 ASME B107.2
J15037L 2-5/16" 3-1/2" 3-1/4" 1-29/32" 3-57/64" 5-7/8" 8.85 ASME B107.2
J15038L 2-3/8" 3-3/4" 3-1/4" 1-61/64" 3-57/64" 5-7/8" 9.85 ASME B107.2
J15039L 2-7/16" 3-3/4" 3-1/4" 2-1/64" 3-15/16" 6" 10.63 ASME B107.2
J15040L 2-1/2" 3-3/4" 3-1/4" 2-1/16" 3-59/64" 6" 9.55 ASME B107.2
J15041L 2-9/16" 3-3/4" 3-1/4" 2-7/64" 3-57/64" 6" 9.19 ASME B107.2
J15042L 2-5/8" 4-1/8" 3-1/4" 2-5/32" 3-57/64" 6" 14.50 ASME B107.2
J15043L 2-11/16" 4-1/8" 3-1/4" 2-7/32" 3-63/64" 6-1/8" 11.68 ASME B107.2
J15044L 2-3/4" 4-1/4" 3-1/4" 2-17/64" 3-31/32" 6-1/8" 12.17 ASME B107.2
J15045L 2-13/16" 4-1/4" 3-1/4" 2-5/16" 4-1/16" 6-1/4" 12.30 ASME B107.2
J15046L 2-7/8" 4-1/2" 3-1/4" 2-3/8" 4-3/64" 6-1/4" 14.03 ASME B107.2
J15047L 2-15/16" 4-1/2" 3-1/4" 2-27/64" 4-1/64" 6-1/4" 13.64 ASME B107.2
J15048L 3" 4-1/2" 3-1/4" 2-15/32" 4-1/8" 6-3/8" 13.49 ASME B107.2
J15049L 3-1/16" 4-3/4" 3-1/4" 2-33/64" 4-1/8" 6-3/8" 15.33 ASME B107.2
J15050L 3-1/8" 4-3/4" 3-1/4" 2-37/64" 4-5/64" 6-3/8" 14.35 ASME B107.2
J15051L 3-3/16" 4-3/4" 3-1/4" 2-5/8" 4-3/16" 6-1/2" 15.68 ASME B107.2
J15052L 3-1/4" 5" 3-1/4" 2-43/64" 4-5/32" 6-1/2" 20.64 ASME B107.2
J15053L 3-5/16" 5" 3-1/4" 2-47/64" 4-1/8" 6-1/2" 21.50 ASME B107.2

1-1/2" DRIVE DEEP LENGTH SOCKETS - 6 POINT (CONTINUED)

J15021L 1-5/16" 2-3/4" 3-1/4" 13/16" 4" 5-11/16" 10.30 ASME B107.2
J15054L 3-3/8" 5" 3-1/4" 2-25/32" 4-1/8" 6-1/2" 16.05 ASME B107.2
J15055L 3-7/16" 5" 3-1/4" 2-27/32" 4-7/64" 6-1/2" 21.81 ASME B107.2
J15056L 3-1/2" 5-1/8" 3-1/4" 2-7/8" 4-5/64" 6-1/2" 17.16 ASME B107.2
J15057L 3-9/16" 5-1/8" 3-1/4" 2-15/16" 4-5/16" 6-3/4" 21.94 ASME B107.2
J15058L 3-5/8" 5-1/8" 3-1/4" 2-63/64" 4-19/64" 6-3/4" 17.50 ASME B107.2
J15059L 3-11/16" 5-1/8" 3-1/4" 3-1/32" 4-17/64" 6-3/4" 24.40 ASME B107.2
J15060L 3-3/4" 5-1/2" 3-1/4" 3-3/32" 4-15/64" 6-3/4" 20.56 ASME B107.2
J15061L 3-13/16" 5-1/2" 3-1/4" 3-9/64" 4-15/64" 6-3/4" 20.48 ASME B107.2
J15062L 3-7/8" 5-1/2" 3-1/4" 3-3/16" 4-7/32" 6-3/4" 16.63 ASME B107.2
J15063L 3-15/16" 5-3/4" 3-1/4" 3-1/4" 4-7/16" 7" 30.50 ASME B107.2
J15064L 4" 5-3/4" 3-1/4" 3-19/64" 4-7/16" 7" 20.98 ASME B107.2
J15065L 4-1/16" 5-3/4" 3-1/4" 3-11/32" 4-25/64" 7" 29.43 ASME B107.2
J15066L 4-1/8" 6" 3-1/4" 3-25/64" 4-25/64" 7" 22.95 ASME B107.2
J15067L 4-3/16" 6" 3-1/4" 3-7/16" 5-1/32" 7-1/4" 29.68 ASME B107.2
J15068L 4-1/4" 6" 3-1/4" 3-1/2" 4-37/64" 7-1/4" 22.24 ASME B107.2
J15069L 4-5/16" 6" 3-1/4" 3-9/16" 4-9/16" 7-1/4" 34.82 ASME B107.2
J15070L 4-3/8" 6-1/4" 3-1/4" 3-39/64" 4-35/64" 7-1/4" 39.95 ASME B107.2
J15072L 4-1/2" 6-1/4" 3-1/4" 3-45/64" 4-1/2" 7-1/4" 31.85 ASME B107.2
J15074L 4-5/8" 6-1/2" 3-1/4" 3-13/16" 4-23/32" 7-1/2" 38.65 ASME B107.2
J15076L 4-3/4" 6-1/2" 3-1/4" 3-29/32" 4-43/64" 7-1/2" 33.75 ASME B107.2
1-1/2" DRIVE UNIVERSAL JOINT
chamfer make it easy to position socket on fasteners.
and bolts protrude.
Retaining Ring or pin and O-ring to help secure the socket to
the drive tool anvil.
• Position at appropriate angle to turn fasteners where
obstructions prevent a straight application.
Product Weight
ID No. L lbs.
J15670 7-13/32" 10.21

1-1/2" DRIVE EXTENSIONS
bolts protrude.
• Male square is oriented in line with female squares for use with
fixed head torque wrenches.
Product Weight
ID No. L lbs.
J15097P 8" 9.21
J15098P 12" 12.64
J15099P 15" 15.14
1-1/2" DRIVE ADAPTERS
bolts protrude.
• Do not over torque small sockets when using them with adapters
on large drive tools.
Product F M Weight
ID No. L lbs.
J15007 1-1/2" F x 1" M 4-3/16" 5.08
J10004 1" F x 1-1/2" M 3-1/2" 2.55

1-1/2" DRIVE ADAPTER - MALE SPLINE
chamfer make it easy to position socket on fasteners.
and bolts protrude.
Product F M Weight
ID No. L lbs.
J15005 1-1/2" SQ.F x #5 SPL. M 5-3/8" 5.93
1-1/2" DRIVE RETAINING RINGS

Product Weight
JRR15046 2-7/8 GRV 3-1/8" 3-1/8" 1/4" 0.035
JRR15054 3-3/8" GRV 3-5/8" 3-5/8" 1/4" 0.040
JRR15062 3-7/8 GRV 4-1/8" 4-1/8" 1/4" 0.046
JRR15070 4-3/8" GRV 4-5/8" 4-5/8" 1/4" 0.048

2-1/2" DRIVE SOCKETS

Product in. Weight

J25028 1-3/4" 4-3/16" 5" 1-1/8" 2-7/8" 5-3/8" 21.0
J25030 1-7/8" 4-5/16" 5" 1-3/16" 2-7/8" 5-3/8" 21.0
J25032 2" 4-3/8" 5" 1-1/4" 2-7/8" 5-3/8" 21.0
J25034 2-1/8" 4-1/2" 5" 1-3/8" 2-7/8" 5-3/8" 21.0
J25036 2-1/4" 4-9/16" 5" 1-7/16" 3" 5-1/2" 21.0
J25038 2-3/8" 4-5/8" 5" 1-1/2" 3" 5-1/2" 21.0
J25040 2-1/2" 4-3/4" 5" 1-9/16" 3" 5-1/2" 21.0
J25041 2-9/16" 4-3/4" 5" 1-5/8" 3" 5-1/2" 21.0
J25042 2-5/8" 4-13/16" 5" 1-11/16" 3" 5-1/2" 21.0
J25044 2-3/4" 4-15/16" 5" 1-3/4" 3-1/8" 5-5/8" 22.0
J25046 2-7/8" 5" 5" 1-13/16" 3-1/8" 5-5/8" 22.0
J25047 2-15/16" 5-1/16" 5-1/16" 1-7/8" 3-1/8" 5-5/8" 22.0
J25048 3" 5-1/8" 5-1/8" 2" 3-1/8" 5-5/8" 22.0
J25050 3-1/8" 5-3/16" 5-3/16" 2" 3-1/4" 5-3/4" 23.0
J25052 3-1/4" 5-5/16" 5-5/16" 2-1/16" 3-1/4" 5-3/4" 24.0
J25054 3-3/8" 5-7/16" 5-7/16" 2-1/8" 3-1/4" 5-3/4" 25.0
J25055 3-7/16" 5-1/2" 5-1/2" 2-3/16" 3-1/4" 5-3/4" 26.0
J25056 3-1/2" 5-9/16" 5-9/16" 2-1/4" 3-1/4" 5-3/4" 27.0
J25058 3-5/8" 5-11/16" 5-11/16" 2-5/16" 3-1/4" 5-3/4" 28.0
J25060 3-3/4" 5-13/16" 5-13/16" 2-3/8" 3-3/4" 6-1/4" 31.0
J25062 3-7/8" 5-15/16" 5-15/16" 2-1/2" 3-3/4" 6-1/4" 32.0
J25064 4" 6-1/16" 6-1/16" 2-1/2" 3-3/4" 6-1/4" 33.0
J25066 4-1/8" 6-3/16" 6" 2-5/8" 3-3/4" 6-1/4" 34.0
J25068 4-1/4" 6-5/16" 6" 2-3/4" 4-1/4" 6-3/4" 37.0
J25070 4-3/8" 6-7/16" 6" 2-3/4" 4-1/4" 6-3/4" 38.0
J25072 4-1/2" 6-9/16" 6" 2-7/8" 4-1/2" 7" 40.0
J25074 4-5/8" 6-11/16" 6" 3" 4-1/2" 7" 41.0
J25076 4-3/4" 6-13/16" 6" 3" 4-1/2" 7" 43.0
J25078 4-7/8" 6-15/16" 6" 3" 4-3/4" 7-1/4" 44.0
J25080 5" 7-1/16" 6" 3-3/16" 5" 7-1/2" 46.0
J25082 5-1/8" 7-1/4" 6" 3-5/16" 5" 7-1/2" 47.0
J25084 5-1/4" 7-3/8" 6" 3-5/16" 5" 7-1/2" 48.0

2-1/2" DRIVE SOCKETS (CONTINUED)
Product in. Weight

J25086 5-3/8" 7-1/2" 6" 3-3/8" 5-1/4" 7-3/4" 50.0
J25087 5-7/16" 7-9/16" 6" 3-7/16" 5-1/4" 7-3/4" 51.0
J25088 5-1/2" 7-5/8" 6" 3-1/2" 5-1/4" 7-3/4" 52.0
J25090 5-5/8" 7-13/16" 6" 3-9/16" 5-1/4" 7-3/4" 53.0
J25092 5-3/4" 7-15/16" 6" 3-5/8" 5-1/4" 7-3/4" 54.0
J25094 5-7/8" 8-1/16" 6" 3-3/4" 5-1/4" 7-3/4" 55.0
J25096 6" 8-1/4" 6" 3-13/16" 5-3/8" 7-7/8" 56.0
J25098 6-1/8" 8-3/8" 6" 3-7/8" 5-3/8" 7-7/8" 57.0
J25100 6-1/4" 8-1/2" 6" 3-7/8" 5-3/8" 7-7/8" 58.0
J25102 6-3/8" 8-11/16" 6" 4" 5-1/2" 8" 59.0
J25104 6-1/2" 8-13/16" 6" 4" 5-1/2" 8" 60.0
J25106 6-5/8" 8-15/16" 6-1/2" 4-1/4" 5-1/2" 8" 62.0
J25108 6-3/4" 9-1/8" 6-1/2" 4-1/4" 5-1/2" 8" 64.0
J25110 6-7/8" 9-1/4" 6-1/2" 4-5/16" 5-1/2" 8" 66.0
J25112 7" 9-3/8" 6-1/2" 4-5/16" 5-1/2" 8" 68.0
J25114 7-1/8" 9-9/16" 6-1/2" 4-5/16" 5-1/2" 8" 70.0
J25116 7-1/4" 9-11/16" 6-1/2" 4-5/16" 6" 8-1/2" 74.0
J25118 7-3/8" 9-13/16" 6-1/2" 4-5/16" 6" 8-1/2" 76.0
J25120 7-1/2" 10" 6-1/2" 4-5/16" 6" 8-1/2" 78.0
J25122 7-5/8" 10-1/8" 6-1/2" 4-5/16" 6" 8-1/2" 80.0
J25124 7-3/4" 10-1/4" 6-1/2" 4-5/16" 6" 8-1/2" 82.0
J25126 7-7/8" 10-3/8" 6-1/2" 4-5/16" 6-1/4" 8-3/4" 84.0
J25128 8" 10-9/16" 6-1/2" 4-5/16" 6-1/4" 8-3/4" 86.0
2-1/2" DRIVE RETAINING RINGS

Product Weight
JRR25064 2-1/2" DR 4 GRV 3-7/8" 3-7/8" 3/8" 0.075 lbs.
JRR25080 2-1/2" DR 5 GRV 4-3/4" 4-3/4" 3/8" 0.100 lbs.
JRR25088 2-1/2" DR 5-1/2 GRV 5-1/2" 5-1/2" 3/8" 0.119 lbs.
2-1/2" DRIVE RETAINING PINS
Product Weight
ID No. Length Width Height lbs.
JRP25000 4-1/2" 1/2" 1/2" 0.219

NO. 5 SPLINE DRIVE STANDARD LENGTH SOCKETS - 6 POINT

Product in. Weight

J09915 15/16" 1-5/8" 2-3/8" 19/32" 1-1/2" 3" 2.3
J09916 1" 1-11/16" 2-3/8" 5/8" 1-1/2" 3-1/8" 2.1
J09917 1-1/16" 1-11/16" 2-3/8" 43/64" 1-1/2" 3-1/8" 2.1
J09918 1-1/8" 1-7/8" 2-3/8" 23/32" 1-1/2" 3-1/4" 2.3
J09919 1-3/16" 1-7/8" 2-3/8" 3/4" 1-1/2" 3-1/4" 2.4
J09920 1-1/4" 2-3/8" 2-3/8" 25/32" 1-1/2" 3-1/4" 2.2
J09921 1-5/16" 2-3/8" 2-3/8" 53/64" 1-5/8" 3-1/4" 2.3
J09922 1-3/8" 2-3/8" 2-3/8" 55/64" 1-5/8" 3-3/8" 2.2
J09923 1-7/16" 2-1/2" 2-3/8" 29/32" 29/32" 3-3/8" 2.4
J09924 1-1/2" 2-1/2" 2-3/8" 15/16" 15/16" 3-3/8" 2.5
J09925 1-9/16" 2-3/4" 2-3/8" 63/64" 63/64" 3-1/2" 3.0
J09926 1-5/8" 2-3/4" 2-3/8" 1-1/64" 1-1/64" 3-5/8" 3.6
J09927 1-11/16" 2-15/16" 2-3/8" 1-27/64" 2-1/8" 3-5/8" 3.6
J09928 1-3/4" 2-15/16" 2-3/8" 1-7/64" 1-27/64" 3-47/64" 4.0
J09929 1-13/16" 3-1/8" 2-3/8" 1-1/8" 1-27/64" 3-7/16" 4.0
J09930 1-7/8" 3-1/8" 2-3/8" 1-3/16" 1-1/2" 3-17/32" 4.0
J09931 1-15/16" 3-1/8" 2-3/8" 1-1/4" 1-1/2" 3-17/32" 4.0
J09932 2" 3-1/4" 2-3/8" 1-1/4" 1-15/32" 3-17/32" 4.0
J09933 2-1/16" 3-1/4" 2-3/8" 1-19/32" 2-1/8" 4" 4.0
J09934 2-1/8" 3-1/2" 2-3/8" 1-37/64" 2-1/8" 3-11/16" 5.0
J09935 2-3/16" 3-1/2" 2-3/8" 1-3/8" 1-39/64" 3-3/4" 4.4
J09936 2-1/4" 3-1/2" 2-3/8" 1-1/2" 1-23/32" 4-3/16" 5.0
J09937 2-5/16" 3-1/2" 2-3/8" 1-23/32" 2-7/16" 3-57/64" 5.0
J09938 2-3/8" 3-3/4" 2-3/8" 1-11/16" 2-7/16" 3-57/64" 5.5
J09939 2-7/16" 3-3/4" 2-3/8" 1-25/32" 2-13/16" 4" 6.3
J09940 2-1/2" 3-3/4" 2-3/8" 1-53/64" 2-13/16" 4-3/8" 5.4
J09941 2-9/16" 3-3/4" 2-3/8" 1-5/8" 1-55/64" 4-3/8" 6.2
J09942 2-5/8" 4-1/8" 2-3/8" 1-59/64" 2-13/16" 4-1/2" 7.1
J09944 2-3/4" 4-1/4" 2-3/8" 1-3/4" 1-59/64" 4-1/4" 7.4
J09947 2-15/16" 4-1/2" 2-3/8" 2-5/32" 3" 4-13/16" 8.5
J09948 3" 4-1/2" 2-3/8" 2" 2-13/64" 4-39/64" 8.6
J09950 3-1/8" 4-3/4" 2-3/8" 2" 2-13/64" 4-39/64" 8.6

NO. 5 SPLINE DRIVE ADAPTER - MALE SQUARE
Product F M Weight
ID No. L lbs.
J09902 No. 5 SPL. F x 1" Sq. M 4-3/8" 2.7
J09904 No. 5 SPL. F x 11/2" Sq. M 5" 3.6
NO. 5 SPLINE DRIVE BUDD WHEEL DEEP LENGTH IMPACT SOCKET - DOUBLE OPENING
Product in. in. Drive Weight

ID No. Size B C L lbs.
J09924-LS 1-1/2" No. 5 Spline No. 5 Spline 2-3/8" 2-3/8" 4-3/16" 3.20 lbs.

WARRANTY AND DISCLAIMER
LIMITED LIFETIME WARRANTY DISCLAIMERS AND LIMITATIONS
The Stanley Works and Proto Industrial Tools (collectively • Is subject to the disclaimers and limitations described
below and is in lieu of all other warranties, express or
referred to as "TSW/Proto") warrants any of its Proto
implied, including the implied warranty of merchantability
manufactured products for the useful life of the product
or fitness for a particular purpose.
against deficiency in material or workmanship.
• Gives you specific legal rights. You may also
have other rights that vary by state.
Torque Wrenches, Multipliers and Testers are warranted for
• Does not extend to products that have been
one year, except for calibration which is warranted for 90 improperly used, altered, or repaired by any
days from date of purchase. Torque products can be repaired entity other than TSW/Proto.
and recalibrated for a nominal charge at the Stanley Proto
• Does not extend to any claim for incidental, consequential,
Authorized repair center (2195 East View Parkway, Suite 103 or special damages. Some states do not allow the
Conyers, GA 30013). Defects in material or workmanship will exclusion of limitation of incidental or consequential
be repaired or replaced at no cost, all other repairs will be at damages, so this exclusion may not apply to you.
a nominal charge. Torque products are precise measuring • TSW/Proto makes no representations beyond those
devices that require care in handling. Stanley Proto contained in this Limited Lifetime Warranty.
recommends that all micrometer wrenches be recalibrated
• Agents of TSW/Proto have no authority to make
once a year or more, depending on usage. representations of any sort beyond those contained
in this Limited Lifetime Warranty.
EXCLUSIVE REMEDY AND CLAIM PROCEDURE
• Distributors of record must act as a return agent.
• The exclusive remedy under this Limited Lifetime Warranty

for products determined to be deficient in materials or work-
manship by TSW/Proto is repair or replacement
with a reconditioned tool of equal value by TSW/Proto.
• The selected remedy is at the sole discretion of TSW/Proto.

In no event shall TSW/Proto be responsible for more than
the original purchase price of the product.

Proto J07500P Catalog

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Proto J07500P Catalog

Uploaded by

Copyright:

Available Formats

IMPACT SOCKETS AND ACCESSORIES

IMPACT SOCKETS DEEP THIN WALL IMPACT SOCKETS

• The depth of the socket opening is designed to fully engage

• All impact sockets feature two through holes, a groove to

• All Proto® impact sockets feature chamfered service ends

• Patented impact universal joints and sockets last long and

• One piece construction ensures concentricity.

• Unique no-bushing design boosts magnetic strength by

• Magnetic material has been upgraded to a rare earth/nylon

• Available in both power and impact configurations.

• Ring is made from a resin material rather than steel,

• Proto® bits and accessories are offered in a broad range to

• Proto® offers a wide range of insert bits, power bits, bit

• These are manufactured in a variety of sizes and styles to

• A wide variety of bits are available including Phillips®,

• Bit holders, nut setters, and extensions are also available

Phillips and Pozidrivare trademarks of Phillips Screw Company

• Proto® 6 Point Impact Sockets are ideal for use on

532 WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

• Proto® 6 Point Impact Sockets are ideal for use on

Toll Free Customer Service Number: 1-800-800-TOOL

• Proto® 6 Point Impact Sockets are ideal for use on

534 WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

• Proto® 6 Point Impact Sockets are ideal for use on

Toll Free Customer Service Number: 1-800-800-TOOL

• Proto® 6 Point Impact Sockets are ideal for use on

536 WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

• Proto® 6 Point Impact Sockets are ideal for use on

Toll Free Customer Service Number: 1-800-800-TOOL

• Proto® 6 Point Impact Sockets are ideal for use on

SET NO. J69132 - 1/4" DRIVE 7 PC. TORX ® SOCKET SET

• Weight: .38 lbs.

538 WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

• Proto® 6 Point Impact Sockets are ideal for use on stubborn or

1/4" DRIVE STANDARD LENGTH SOCKETS - 6 POINT

Product Weight ASME

1/4" DRIVE METRIC STANDARD LENGTH SOCKETS - 6 POINT

Toll Free Customer Service Number: 1-800-800-TOOL

• ProtoGrip™ Magnetic Sockets use high strength magnets

• ProtoGrip™ Magnetic Sockets use high strength magnets

540 WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

• ProtoGrip™ Magnetic Sockets use high strength magnets

Product Weight ASME

• ProtoGrip™ Magnetic Sockets use high strength magnets

Toll Free Customer Service Number: 1-800-800-TOOL

• For use with Torx® style fasteners.

1/4" DRIVE DEEP LENGTH SOCKETS - 6 POINTS

• Proto® 6 Point Impact Sockets are ideal for use on

Product Weight ASME

542 WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

• Proto® 6 Point Impact Sockets are ideal for use on

Toll Free Customer Service Number: 1-800-800-TOOL

• Proto® 6 Point Impact Sockets are ideal for use on

544 WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

• Proto® 6 Point Impact Sockets are ideal for use on

Toll Free Customer Service Number: 1-800-800-TOOL

• Proto® 6 Point Impact Sockets are ideal for use on

546 WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

• Proto® 6 Point Impact Sockets are ideal for use on

Toll Free Customer Service Number: 1-800-800-TOOL

• Proto® 6 Point Impact Sockets are ideal for use on

548 WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

• Proto® 6 Point Impact Sockets are ideal for use on

Toll Free Customer Service Number: 1-800-800-TOOL