LSCM Assignment-Term-IV
LSCM Assignment-Term-IV
Elaborate.
Answer: Here are five ways that can optimize the vaccine supply chain and help communities
everywhere return to some kind of normal as soon as possible.
Planning is the key to success: An effective supply chain puts the vaccine receiver at its heart,
and aims for speedy execution with minimum wastage, at an agreed and understood cost-to-
serve. It should make the most of existing distribution and cold storage capabilities (for flu jabs
or other vaccines) and offer the potential to scale up if necessary. Good planning is necessary to
understand the capacity of infrastructure and critical assets (e.g. refrigerated trucks, fridges at
GPs/family practices) to be able to deliver in an effective way. Demand planning comes to the
fore when millions of doses of vaccine are required.
Those responsible for procurement must swiftly evaluate different manufacturers of vaccines,
syringes and refrigeration equipment, determined in part by their location, capacity, and
compliance with licensing and other regulatory requirements. With a number of vaccines
available — and more possibly in the pipeline — there is the option to use multiple
manufacturers. While this can increase volume, it also adds to complexity, as different products
may require different storage conditions and have varying expiry dates. Complexity is further
increased as over the coming months, governments and health systems will be transporting
COVID-19 vaccines to hundreds and possibly thousands of destinations — at a level far beyond
current vaccine distribution.
They need to assess the available transportation options, check whether airports and ports can
handle the increased traffic, and map the many routes. One major decision is whether to
coordinate centrally, or adopt a more devolved or more hybrid model based on the patient and
location (metro, regional, remote) differentiation. Given the high demand for the vaccine, it may
not be possible to ramp up the existing estate of suitable vehicles with cold storage and fragile
stock facilities. Third-party logistics companies are likely to fill the gap, with the option of one or
more providers for national, regional and/or local deliveries.
The procurement or logistics team could also consider appointing a lead provider to
coordinate other providers. Despite the high priority of vaccines, there should be models for the
costs of transport at different frequencies of delivery, to make the most cost-effective choice.
These providers must practice robust inventory management, to optimize product flows from
suppliers and wholesalers, supported by strict controls over temperature and handling
throughout the product journey. The health system supply chain manager could create and
share a rolling 13–26-week demand forecast with manufacturers and logistics providers, to
ensure that outreach locations can be reached before vaccines expire. Contracted providers
should also be subject to performance and compliance management, with key performance
indicators (KPIs), and careful monitoring via logistics tracking dashboards. Control tower/CDC
capabilities are also useful in order to conduct event management, i.e. late delivery, out of spec
delivery etc. with thresholds set based on the policies agreed. Ongoing reviews on a daily,
weekly and monthly basis can address any problems, re-calibrate supply to meet changing
demand, and aim for continuous improvement of providers’ performance. The key participants
are the healthcare system(s), manufacturers, logistics service providers, health professionals and
pharmacists.
Keep vaccines at the correct temperature Cold storage is an integral part of the new COVID-19
vaccine supply chain. The huge volumes of the vaccine being produced and transported could
expose limitations in refrigerated capacity in warehouses, vehicles and healthcare facilities. In
addition to ramping up their cold storage infrastructure, supply chain managers need end-to-
end temperature logging, as well as real-time monitoring and reporting of temperature, shock
and moisture — with system alerts via automated scanners, to maintain warehouse integrity.
This allows time for remedial action to prevent damage and spoilage, and prevents
compromised goods in transit from reaching the customer. Supply chain managers also need to
be alerted in advance if a particular geography looks likely to exceed its cold chain capacity, and
either bring in new resources or adjust delivery quantities accordingly.
Track and trace Complete, end-to-end inventory visibility is vital, to understand when vaccines
will be available for use, and to avoid damage or theft. Data on tags from COVID-19 vaccine
batches enable efficient tracking, giving supply chain managers a complete picture of the
volumes stored or in transit, as well as any vaccines delivered but not yet used. Stock can also be
identified according to the manufacturer and expiry date — which is important, given the
relatively short shelf life. All of which enables better demand planning, to inform decisions on
ordering, distribution, order allocation, storage and returns, optimizing product flows and
avoiding overload and wastage. Post-vaccination tracking plays a vital role in evaluating efficacy,
but can only be effective if there are mechanisms to adverse events i.e. record
successful/unsuccessful treatments and side-effects. It would also enable distribution and
application centers to efficiently plan for second dosage and recurring applications for the
vaccine to further eliminate the risk of incompatible vaccine brands. Such a capability removes
the need for logistics providers, hospitals, pharmacies and other players to carry out physical
stock counts, and ensures that the numbers of actual and recorded products are reconciled
Track and trace calls for a robust data analytics capability, and an established process for
capturing, storing, transferring and processing real-time data. In such a large and complex
supply chain, involving multiple players and geographies, one should not underestimate the
importance of taxonomies and common language. Asset data standardization, agreed
taxonomies, and commercial data sharing can all help to generate common understanding,
visibility and compliance.
Ensure product integrity Like many supply chains, pharmaceuticals can be vulnerable to
counterfeiting, tampering, contamination and theft — especially as products and components
often pass through multiple locations and countries. Provenance and authenticity is critical, to
assure end users of the vaccines’ safety and efficacy. Batches should be serialized for easy
identification, with proof of pick-up and delivery confirmed via an authenticated chain of
custody, reported through smart, IoT devices and applications. These should detect any
anomalies and send alerts — visible to all key supply chain managers — and be able to trace the
source of any unauthorized intervention. Anyone coming into contact with the vaccines must be
trained in identifying counterfeits. Comprehensive assessment and monitoring also places the
purchaser of the vaccine in a stronger position, should they need to make any insurance claims
for unusable stock.
Manage last-mile delivery, returns and post-vaccine tracking Last-mile delivery is one of the
most critical parts of the COVID-19 vaccine supply chain. The number and location of vaccination
sites will be determined by the percentage of population to be vaccinated, the priority groups,
the population density, availability of trained frontline workers, and the distance the target
population must travel to access health facilities. Longer-distance journeys of bulk vaccine
freight are typically made by larger trucks, with smaller trucks and carriers taking over for the
‘last-mile’, performing multiple drops to healthcare centers, pharmacies and hospitals. Accurate
volume flow is critical to avoid wastage: even the larger distribution points can only accept 5–7
days of stock due to on-site capacity limitations and cold chain requirements. The last-mile
delivery vehicles must be equipped with cold chain storage and precious cargo facilities,
commandeered by licensed drivers, and integrated into track and trace systems to assure 24/7
visibility for both delivery and returns (due to expired stock, overstocking, or damaged stock).
Ideally, one truck or carrier should manage both outbound fulfilment and returns, offering
transport, processing, storage and destruction. They will be responsible for the integrity of
returns and show there has been no replacement or theft of vaccines.
The complexities in getting a new vaccine supply chain running efficiently underscore some larger
lessons for how supply chains operate in the new normal of the post-pandemic world.
In light of that need, vaccine makers began sourcing dry ice along with the equipment to produce it.
And the other nodes in the supply chain, such as vaccine distributors and pharmacies, have looked into
sourcing ultra-cold freezers from ice cream manufacturers to keep the vaccines at the required low
temperatures.
These are just some of the challenges the developed world is facing with regards to producing and
distributing the COVID-19 vaccines.
Developing countries with limited access to cold-chain technology are likely to have it even tougher.
The complexities in getting a new vaccine supply chain running efficiently underscore some larger
lessons for how supply chains operate in the new normal of the post-pandemic world.
Lessons Supply Chains Can Learn From the COVID Vaccine Rollout
1. Complexity isn’t going away. As vaccine manufacturers and distributors have discovered, supply
chains are increasingly complex systems that generate their own unique challenges. Components need
to be stored, shipped and delivered at low temperatures for millions of vaccine doses that need to be
administered – and then administered again to achieve the right efficacy. These complexities of supply
chains are not going to disappear, no matter what strategies enterprises adopt to manage the risks that
complexity brings with it.
2. Supply chain collaboration is more important than ever. Across all tiers of the supply chain, effective
and efficient collaboration is essential. To cope with new problems and break down the silos that tend
to develop across enterprises, the role of a supply chain management software platform becomes
crucial given its ability to orchestrate the elements harmoniously.
3. Flexibility is a critical supply chain capability. This is driven by a mindset of innovation and creativity,
as seen in how companies looked to new avenues for the necessary cold-chain equipment. Flexibility is
also enabled by supply chain software, which is helping enterprises identify potential bottlenecks and
execute solutions. And that will make them more resilient to future disruptions.
The Growing Need to Digitalize Supply Chains
As the unique strategies developed to resolve the COVID-19 vaccine production and delivery challenges
show, the transformation of supply chain management has become imperative in today’s volatile
business environment.
By digitalizing supply chains, getting a handle on diverse data streams, and harnessing analytics to better
predict potential issues and outcomes, companies can strengthen their supply chains and take
advantage of the lessons learned from the pandemic.
Q.2)Farmer gets Rs.8 /kg & you as a Consumer pay Rs.40/kg for the same Vegetable.
What is wrong with Supply Chain for Agricultural products in India?
Deliberate on the problems & possible solutions.
Answer: To explore the problems faced by Indian agriculture for food security in terms of inadequate
infrastructure and highly inefficient supply chain in context of information technology. Due to lack of
efficient infrastructure and food processing industry about 30-35 percent of all foods produced in India
are wasted. The critical issues at each sub-system of agriculture supply chain, starting from the input to
the consumer, with a view to integrating them in efficient and effective manner. Investments in cold
chain infrastructure, applied research in post harvest technologies, installation of food processing plants
in various sectors and development of food retailing sector are mandatory for achieving gains in this
sector.
Agriculture has been the backbone of Indian economy since independence and before that, right now
with nearly 12 percent of the world‟s arable land, India is the world‟s third-largest producer of food
grains, the second-largest producer of fruits and vegetables and the largest producer of milk; it also has
the largest number of livestock. The other crucial problem that constraints the growth of the agricultural
sector is that public investment in agriculture as a percentage of GDP has been declining gradually. A
policy analysis of agricultural system shows that there is multiplicity and duplicity of rules and
regulations dealing with various components of supply chain in agriculture. Lack of coordination among
these, again, leads to the poor alliance and collaboration supply chain, which in turn leads to the
inefficient product and information flow.
Assessment of food supply chain management has not been given its due and that should be undertaken
on the needs/options for policy and regulatory reforms that affect farmer risk management as well as
the possible revision/reform of governmental risk management instruments. Aspects like cold chain
needs to be given more consideration as it has contributed tremendously to trade in fruits, vegetables
and flowers in developed countries and it could be game changer in India. Besides, as cold chain, results
in the reduction of losses and retention of the quality of horticultural produce. While the introduction of
a cold chain facility nationwide due to some institutional, structural and financial constraints may not be
immediately possible in India, attempts must be made to develop a cool chain. Food loss reduction is
less costly than an equivalent increase in food production. If efforts are not made to modernize the
harvest handling system for horticultural crops, then postharvest losses will continue to have a negative
economic and environmental impact. There is no doubt that postharvest food loss reduction
significantly increases food availability.
Physical infrastructure variables are in need, as roads and electricity, which link villages to nearby
assembly and wholesale markets and in turn with large wholesale and terminal markets and ports.
There is huge lack of warehousing and cold storage facility and encouragement for the establishment of
cold storage facilities. There is need of transportation facility such as refrigerated carriers to facilitate
storage and transportation of perishable agricultural commodities.
There is lack of encouragement for technological developments in the packaging of agricultural
commodities and in promoting packaging facilities appropriate to specific commodities.
Due to high level of government regulations, the investment in the organized private agribusiness is low.
The new corporate entries are not just participating in the chain to source there required material,
(mainly indirectly from the farming community) but they focusing more on the primary source of
agricultural produce particularly farming community through contract farming and tools by procuring
agri produce from farmers.
After exploring important issues such as post-harvest losses and its impact and ways to reduce it and to
achieve that, one can understand that there is need of educating farmers in selecting the correct inputs
and in postharvest handling, including cleaning, food safety, drying, sorting, and packaging at the farm
gate. There has been gradual improvement in the accuracy of demand forecast by dynamic adjustments
to reflect changes in demand, lead times, transit time, capacity, and transportation and distribution
routes, as well as events outside the organization due to advancement in information and
communication technology and it has done a good job as per reducing the post-harvest losses and it
means that variance of lead-time can be reduced by removing non value-added steps and activities,
improve the reliability and robustness of manufacturing, administrative and logistics processes.
Standards for the handling and storage of all perishable items has been improving but still far away from
where it can be and better the handling ,storage and preservation of quality of fruits and vegetables,
which would increase the price and consumption, which in turn, would provide a better return to the
farmer. Supply chain management systems have the ability to track critical events & activities and when
these events do not unfold as expected, they send out alerts and messages to notify appropriate
managers to take corrective actions. Flexibility is still lacking supply chain system and it can be improved
by enhancing responsiveness. Companies need flexible strategies that match their operations, such as
product design, sourcing, manufacturing and postponement.
Establishment of pack house facilities having basic requirements such as washing tanks, sorting and
grading devices and cold storage facilities at the premises of the Dedicated Economic Centres (DEC)
(collecting centres) in major fruit and vegetable producing areas in the country, will overcome the
problems of quality deterioration, contamination of fresh produce with harmful bacteria and other
extraneous matter and will improve the safety of produce to a great extent.
The challenge for developing more effective and integrated networks is to encourage such a mind-set,
and use it to promote adoption and implementation of enabling technologies and methods. In other
words, this review of the literature serves to highlight the inter-dependence between integration
(technologies, logistics, and partnerships), a strategic view of supply chain systems, and implementation
approach. All three need to inform and underpin each other in order for management of supply chains
to be able to deliver on the promise of benefits for all trading partners.
For establishing an efficient and effective supply chain system in the Indian agriculture, there is an
urgent need to improve the functioning of regulated markets and amend the APMC Act by the all state
government as per the model act on agricultural marketing suggested by the central government to
ensure private participation in supply chain system in an organized and legal manner. This will enable
private agro processing units and business operators to link themselves with farming community
directly, eliminating multiple intermediaries. For increasing efficiency in food processing segment, the
process of raw material sourcing needs to be redesigned in an efficient organizational framework with
proper backward linkages.
Step-by-step explanation
Agriculture is inherently a fragmented and unorganized sector involving a diverse range of distinct
stakeholders such as inputs supplier, farmers, traders, commission agents, processors and distributors.
As compared to developed countries, the Indian agriculture supply chain is far more complex and
difficult to manage because of its unorganized nature and a large number of intermediaries
The enormous wastage of agri- produce annually is due to gaps in basic infrastructure, which leads to
instability in prices and low realization of prices by the farming community. Another important reason
for inefficient supply chain is the inadequacy of logistics infrastructure, i.e. roads, railways, airport,
seaports, information technology, telecommunications and energy production, which is poor as
compared to other developed and developing countries
Lack of proper infrastructure for procuring agricultural produce from the farm gate to the consumer has
led to huge losses in transit. The farmer hardly benefit from any price rise while the many layers of
intermediaries enjoy high margins. Agriculture can realize its full potential by applying the principal of
supply chain management by strengthening the collaboration between various stakeholders,
nonexploitative vertical and horizontal integration, market reforms, precision farming, contract farming,
demand-led diversification, and the extensive and intensive use of information technology for real time
communication across the chain
There is also lack of emphasis on both formal and informal risk management options available, although
in practice, most analytical attention will likely focus on the scope for improving or supplementing
formal mechanisms, including institutional and financial arrangements, technological changes, adoption
of improved management practices, and/or investments in infrastructure. To the extent that the
government is mainly focused on the position and welfare of poorer farmers, then greater attention
would need to be given to alternative informal mechanisms and improving their efficacy.
Food loss reduction is less costly than an equivalent increase in food production. If efforts are not made
to modernize the harvest handling system for horticultural crops, then postharvest losses will continue
to have a negative economic and environmental impact. There is no doubt that postharvest food loss
reduction significantly increases food availability. An efficient collaboration between stakeholders will
reduce risk, losses and greatly improve the efficiency to ensure food security and development.
Q.3) What ails India`s Supply Chain Management system in general. Identify the factors responsible
Answer:
Supply Chain Management implementation has high priority within the organization and that it will
receive the required resources. Apart from such primary support, psychological or behavioral support is
also important for the smooth implementation of supply chain management, especially if there is
significant resistance from the staff involved. Use of information technology such as internet, intranet,
software applications packages and decision support systems can be applied to facilitate the information
flow within the supply.
In India organizations was operated in a protected environment.
Critical success factors for supply chain implementation have significant correlation with performance in
terms of customer service and satisfaction, innovation and growth, significantly correlated with financial
performance, supply chain implementation have significant correlation with performance in terms of
internal business,
Supply side supply chain challenges in India mainly relate to poor infrastructure, complex tax
infrastructure, weak distribution system, fragmented market, and lack of technology adoption. Lack of
technology adoption also remains a challenge for India's supply chain. With the potentially long-term
effects of the global economic slowdown, organizations in India must continue to invest in IT to improve
their competitive advantage. The government is aware of this problem. In logistics, a highly fragmented
trucking industry makes it difficult for companies to manage the plethora of carriers required to handle
shipment volumes. Although outsourcing of logistic activities to third-party logistics providers is
increasing, there are very few organized providers in India.
India's Supply Chain is improving, but still has a long way to go.
Step-by-step explanation
The complexities of India's supply chain may appear overwhelming, understanding and mastering them
is a critical success determinant for an organization attempting to serve customers in India. An efficient
review of supply chain design will help better position companies in what is becoming an increasingly
competitive marketplace. It implies that performance of Indian SMEs can be improved on all issues such
as customer service and satisfaction, innovation and growth, and financial and internal business
parameters if the management commits to implement Supply chain management. On the other hand,
management must pay attention to strategy development for Supply chain management and enough
resources should be devoted to it.
It is observed that the critical success factors have positive impact on different categories of
performance such as customer service and satisfaction, innovation and growth, financial performance,
and internal business of India
India: Source and Market India became an independent nation in 1947. At that time it was among the
poorest countries in the world and was put in the category of developing nations. For the next 40 years,
India followed a centralized socialistic democracy with close ties with the Soviet Union. During this time,
India started plans to improve agriculture and irrigation that mainly were focused on rural India.
Simultaneously, the government set up programs and institutions of higher excellence for science and
technology to compete with the very best in the world. However, the economy was closed for most
part, bureaucracy was powerful and the efficiency and innovation of a capitalistic economy were lacking.
In the early 90’s with the fall of the Soviet empire, the economy in India was opened up, foreign
investment constraints were eased, multi-national firms were allowed in several sectors, bureaucracy
was reduced and businesses encouraged. The government during this time also focused on some new
sectors such as software development and telecommunication where India could catch up with other
world competitors. These changes have positioned India to the world both as a source and as a market.
India: A Source Firms typically decide to source from an international location when it adds value in
terms of cost, quality, time or capability. Whenever a firm decides to relocate its operations or invest in
new facilities it needs to answer some key questions such as Managing Supply Chain Operations in India
139
3. How does this affect the firm’s ability to quickly respond to changing
4. How does this improve the firm’s capability in the global market?
In today’s context, cost and quality are important opportunities that give advantage to India. Due to
Indian government’s focus on education in science and technology after independence, today India
graduates 200,000 english speaking engineeering graduates every year, the largest in the world. These
and other english speaking graduates are in great demand for operating the world manufacturing and
service economy due to cost advantages. Their wages are one fifth or sometimes one-tenth of
comparative wages in the western world. For example, a recent graduate of engineering in India might
get an annual salary of $5000 as compared to $30000 to $50000 in the U.S.
The cost advantage in the labor pool is not restricted to service sector or engineers alone, this
advantage spans through manufacturing sector as well. For example, a worker in an Indian textile
company could be paid around $500-$1000 per year whereas a similar worker would be paid around
$25000 per year in the U.S. This provides an opportunity for a multinational firm to reduce cost when
they relocate or outsource their operations to India. That is why we find so many multinational
companies are either setting up their own subsidiaries in India (like GE, IBM, Intel, Ford, Glaxo, Google)
or have outsourced business functions like software development, software maintenance, call centers
and credit processing. Although cost has traditionally been the main driver for shifting operations to
India, today the value proposition spans quality as well. For example, in the software sector, initially
firms outsourced development to Indian companies for cost alone. Today India boasts of having the
largest number of firms that are at CMM process maturity level 5, an international measure of quality of
process used for software development, testing and maintenance.
Firms choose the best Indian vendors such as Infosys, Wipro, Tata Consulting and HCL, who can not only
provide low cost but deliver the highest quality in their work. This has led to a boom in the services and
technology sector in India in the last decade. According to one estimate, India’s service and technology
sector would be at $50 billion in 2008 and at $80 billion in 2010 (Engardio2005). The time element is
very useful in the global service industry because of the ability to work 24 hours a day on a particular
task. It is not uncommon for U.S. software firms to work with an Indian partner to create a joint virtual
development team where the U.S. engineers work on the project during their day time and the Indian
engineers work on the same project during the night time in US while it is day time in India. This
provides a tremendous advantage in fast life cycle innovation based industries such as software. The
distance between the two teams sometimes creates challenges in terms of communication and
integration, but many firms have found that advantages of shortening the development cycle overweigh
the challenges. Due to global outsourcing trends in the service sector and India’s key role in it, the Indian
services and technology sector has been in the limelight in the last few years. The manufacturing sector
in India has traditionally lagged China in both cost and quality. China’s manufacturing sector is estimated
at $900 billion in 2006 as opposed to India’s sector which is closer to $100 billion (Engardio2005).
However, the Indian manufacturing sector is catching up in a big way.
Top Indian manufacturing firms such as Reliance, Hero Honda, TVS and TataMotors have among the very
best processes and have won several international quality awards including the coveted Deming Prize.
While today India lags China by a huge margin in this sector, going forward, value that Indian firms
would bring to the table will be in terms of improving strategic capabilities for multinationals. Indian
firms are uniquely positioned to benefit from the diversifying strategy of multi-national firms. For
example, the textile manufacturing is mostly concentrated in China today. As western firms move
overseas they want to have alternative world class locations in addition to China. Intimate Clothing, a
subsidiary of Mas Holdings, a leading Sri Lankan firm that supplies to major brand names all over the
world and was once described as “Victoria’ Secret’s Well Kept Secret” by Forbes Magazine, is playing on
this advantage in a very clever manner. They are strategically expanding their operations in India (as
opposed going to other lower cost countries in the region) since they want to develop not only a “low
cost” operation but also a “world class” operation.
They have set up two plants already, one in Chennai and another in Bangalore with the very best
processes. Their plan is to expand their operations in India to span the whole production spectrum from
design, prototype, assembly and distribution. It is clear such facilities outside China will play an
important role in improving the capabilities of multinational firm in the future.
A population of over a billion people makes India an attractive market for selling products and services.
The growth in the economy has been above 6 percent over the last decade and the per capita income
has almost doubled to $543 in 2004 (Bharadwaj et al 2005). Although India accounts for only 2% of
the current world GDP, it is estimated that it could account for 17% of the world GDP in 2050 (Engardio
2005). The consumer market is even more attractive given that India is already in the top 10 markets
with a value at $250 billion (Bharadwaj et al. 2005). It is projected that in the next five years India will be
lee v.2006/05/16 Prn:19/06/2006; 12:45 F:LEE06.tex; VTEX/NP p. 5 crop: (6.125in, 9.25in) type wd:
10966, ht in the top five in terms of market potential for consumer goods. It is important to understand
that even though in developed nations there are typically three economic strata – upper income, middle
income and lower income groups, in India which is in the transition from a developing to a developed
nation there are more strata (Joseph 2005).
One could call them the upper income group earning $6000 per annum or above, the next is middle
income group that earns between $3000 and $6000 per annum, the lower income group that earns
between $1000 and $3000 per annum and the very poor group that earns less than $1000 per annum. It
is to be noted that purchasing power parity adjusted these numbers need to be multiplied by a factor of
5. It is estimated that 150 million households are in the very poor category, 43 million households are in
the lower income group, 3 million households are in the middle income group and 200,000 households
are in the upper income group. Clearly, the number of potential customers is very high in India but
prices that the market will bear are very different than those in developed countries.
For economies with the demographics and purchasing power as in India, multinational firms will need to
innovate in order to successfully satisfy the consumers. The sheer size is a great opportunity but it is a
different story when it comes to execution. Between 1947 and early nineties, India was pre-occupied
with agricultural development that it neglected infrastructural development. As a result, the roads are
well below the standards in any developed economy and are worse than in some of the other
developing countries. It is only in the last couple of years that the government is systematically building
highways that connect major cities. The demand for power in India far exceeds the supply.
This problem is worse in big cities such as Delhi and Mumbai. Further, India is a heterogeneous nation
that has several states, several languages, several cultures and as a result very diverse customer
preferences. The income distribution as well as preferences in rural and urban markets are also
significantly different. Therefore, cracking the Indian market is not an easy task to say the least,
however, the rewards for successful firms could be substantial. A firm that has successfully developed its
supply chain for this market environment is likely to be well positioned to be a leader.
3. Supply Chain Management in India :The five major process elements of any supply chain are design,
planning, procurement, production and delivery. In the next few passages we will highlight the key
challenges and opportunities faced by firms operating in India in each of these processes.
3.1 Design Product design is an important element of any supply chain. A significant proportion of total
costs incurred during the life cycle of the product are determined at the design stage (Swaminathan and
Lee 2003). In India, an important characteristics that needs to be kept in mind at the design stage is the
income diversity in the population. Just the huge differences in the ability to pay for a product, makes
many of the successful products of the developed economy unviable in India. The example of shampoo
sales in India serves this very well. When multinational firms such as Unilever first started selling
shampoos in India they bottled them in packages similar to their offerings in developed countries and
priced them around the same price (around $2).
With this strategy, they were able to address only the topmost layer of the Indian households and could
not penetrate the huge market. In the last few years, they have started selling shampoo in sachets (one
time use) that sell for 2 cents. Clearly, by doing so, they have made their product more accessible to the
customers and today it is estimated that close to 45% of the Indian population purchases shampoos up
from 18% ten years ago (Bharadwaj et al. 2005). In this process, the multinational firm had to come out
of the traditional thinking of large sizes and economies of scale and focus its attention more on
innovative packaging that could enable pricing products at 2 cents.
Clearly, this involved redesign of both the product and the package and finding local suppliers who could
potentially operate profitably at those costs. Firms are beginning to realize that there is money in
markets like those of India at the bottom of the pyramid (Prahalad 2004). Many firms in India are now
designing products specifically for the Indian market. For example, Hewlett Packard has developed a
solar powered digital camera and a solar powered photo printer that they are piloting in villages that
often do not have adequate power supply. Using these products, they have created a new career for
some of the village women, who have become photographers that go from village to village and take
pictures and help create national identification cards for villagers in the remote parts of the country.
This has removed the necessity for villagers to go to the city to get a picture taken and apply for an
identification card. Another example is the automobile sector. In the automobile market recently India
became the largest small car market only behind Japan with the sales growing at 10% a year. Much of
this growth has come from the small car segment. The largest selling car in India (known as Maruti 800)
costs around $5000.
Recently, Tata Motors, another Indian firm has announced that it will be developing a car for less than
$2000. It is important to understand that in order to compete in India in this sector the costs of the car
has to be affordable to the masses. The Low cost may be enabled by removing safety features that
would considered required in a developed nation. For example, most of the small cars do not have any
safety airbags. Although it might seem shocking for a multinational firm to try to design products
without these features, the need for airbags is limited on Indian roads. For most of the intra-city travel
cars speed limits are restricted to 30 miles an hour (in theory) and could be as slow as 5-10 miles an
hour (in practice) during peak time. Since Indians typically do not travel inter-state by their personal car,
most consumers in that market are not willing to bear the costs of safety airbags.
However, as the inter-state roadways improve, the customer preferences are likely to change and they
may demand safety airbags in cars. With India’s population and economic status, it is not surprising that
the biggest market in the automotive sector is the two wheeler (motorbikes and scooters). Hero Honda
is the world’s largest producer of two wheeler motorbikes whose annual sales exceeded 2.5 million units
last year. Two wheelers are not only used for personal transport of one or two people but are often
used for transporting families of four and serve both the urban and the rural market. It is important to
note the difference between bikes sold in western countries and in India.
An important design element of these vehicles is the fuel efficiency and many of these vehicles provide
up to 100 miles per gallon. Further, power (or engine size) which is a critical and often differentiating
element of bikes in developed countries (such as Harley Davidson) is valued less in this market because
of road conditions which hamper the ability of the consumer to relish the thrills of quick pickup and high
speeds. As a result, most of the bikes sold in India are in the ranges from 75cc to 225cc, very different
from bikes sold in US.
While designing products for India it is important to leave the mentality of tweaking existing product line
for a new market. Although the costs associated with development of products specifically for the Indian
market may seem prohibitive, firms can exploit the experience in India in developing products for the
“bottom of the pyramid” in other countries in Asia, Africa, Europe and South America where a similar
demographics exists. HP’s initiative in developing affordable digital cameras and printers is likely to have
an impact on other parts of the world as well. The bottom line is that firms should assess the market
potential and needs accurately and should be prepared to come up with unique products that cater to
the needs of the Indian market (and other world market with a similar profile) in a profitable manner.
3.2 Planning Planning function can be for strategic choices such as product launch or for tactical
decisions such as sales planning and forecasting. Planning is often quite challenging in India due to lack
of visibility of sales at the end customer level. The concept of point of sale systems have caught on in
urban areas only in the last decade or so. As a result, a firm selling products has limited integration of
information in their supply chain. The rural market is in worse shape in terms of sales information since
these shops do not have any point of sales systems. Many of them still rely on paper and pencil. In this
environment, it is not prudent to expect that firms will have the capability to capture lost sales and
stock-out conditions quickly. In fact, in several firms the operating policies may have serious
inefficiencies. For example, a sales executive of one of the large multinational consumer goods firm in
India indicated that recently they found that it was quite common for salesperson in rural areas to only
take orders for products in-stock at the warehouse.
Thereby, items which were out of stock and potentially were in great demand, were never being
replenished while slow moving items were being ordered all the time. The lack of SKU level sales and
demand information at the retail outlets leads to usage of approximate surrogate measures for
customer service such as total coverage of rural retail outlets, number of sales person visits, and the
overall product lines sold in a given time frame, which have their own ramifications for the supply chain.
The lack of point of sales and information makes it hard to practice innovative concepts such as vendor
managed inventory and collaborative forecasting particularly in the retail segment. In the consumer
goods sector much of the sales take place in small local stores that do not have access to bar coding.
Further, the lack of such data and information, makes the planning process more of a push strategy
primarily driven by sales targets that the firm would like to achieve in a given period. This leads to
several unwanted effects like “inventory dump” and “hockey stick” phenomenon that lead to self
induced seasonality wherein firms show very high sales towards the last quarter. Planning new product
launches is complicated in India due to two main reasons. The first relates to the diversity of the
population and the size of the country. As indicated earlier, India is composed of many states and each
state has traditionally has had its own culture, language and preferences for products. Therefore, firms
need to plan for a product launch in the spirit as they would do for a multi-lingual region such as Europe.
That is the firms needs to develop packaging in different languages, needs to develop customized
advertisement campaigns as well as setup distribution network for the large population. Further, the
lack of information tracking at the retail level makes it hard to evaluate how a product is doing in the
first few weeks after the launch. Planning is also adversely affected by the over reliance of the rural
economy on monsoons. Sales are crucially dependent on when and how much rainfall the country gets
each year. Almost 68% of the total sown area in India is vulnerable to draught. If monsoons are good
then the agricultural production is likely to be good and the farmers have greater disposable incomes
which translates into more disposable spending power for purchase of other goods and services. On the
other hand, lack of rain implies lower sales for those goods and services. Therefore, any firm that caters
to the rural India needs to carefully take the monsoon predictions into account while planning for a
season. The challenges of firms which are focused on foreign multinational customers is quite unique.
The value proposition of an Indian vendors to their client is often either low cost or superior quality or in
some cases both. However, many clients have high expectations in terms of response times and
communication capabilities from their vendors. Compounded by the fact that they are located
thousands of mile apart the need for robust planning capability as well as information technology
infrastructure for communication is heightened. Ten to fifteen years ago, Indian firms had a tough time
competing along these dimensions. However of late, many Indian firms have invested monetary, human
and technological resources primarily catered towards their multinational customer. For example, most
of the call centers in India have invested in dedicated telecommunication resources for customer
overseas. Similarly, in the manufacturing sector, it is common nowadays to see firms that have made
customized investments to improve their planning capabilities while dealing with multinational clients.
Planning can be a very difficult task while operating in India and firms need to have extra flexibility in
their execution strategy to be successful. The lack of adequate information systems in the channel
makes planning even more difficult. In recent times, many firms are introducing information systems in
their supply chains and at the retail level and this is likely to help the planning process. 3.3 Procurement
As indicated earlier, one of the opportunities in India lies in the ability to get inexpensive workforce and
suppliers. However, there are some important challenges that firms need to pay close attention to. It is
critical for firms to remember that as they grow their business, the ability of the supply base to grow
may be limited due to capacity constraints. Further, there is huge difference between the capabilities of
big top tier suppliers and the smaller (and often rural) second or third tier suppliers. The best of the first
tier suppliers are sophisticated and follow world class best practices. As indicated by Balakrishnan et al.
(2005), India had the largest number of firms conferred with the Deming award outside Japan, and most
of these have been awarded to large top tier suppliers. However, that does not mean that there are no
procurement challenges in India. In fact, the majority of suppliers lack in critical elements of service
namely quality, delivery reliability and value added services. Product quality is unreliable mainly due to
lack of continual supply of power, water and raw material. In some cases, the quality is adversely
affected by the country’s over-reliance on the monsoons. Delivery times of suppliers show a huge
variance due to road conditions, traffic and distance of the suppliers. It is estimated that only 4% of
suppliers in India are within 3 miles of the manufacturing facility, and more than 50% of the suppliers
are located beyond 300 miles (Chandra and Sastry 2002). One of the reasons for disparate locations of
the supplier base is the presence of industrial zones which were not necessarily optimized for supply
chain performance. Uncertainties in delivery lead times make it essential for a firm to make pragmatic
changes to their just in time production system or hold very high safety inventory levels in the supply
chain. Finally, small to medium suppliers lack major capabilities to design products or services. In most
cases a firm finds it hard to collaborate with such suppliers for designs which can impede faster product
development and also increase design costs. A common approach employed by multinational firms in
India has been to create joint ventures with an Indian supplier. This enables the supplier to ramp up
quickly in a cost efficient manner. However, this approach has mostly been successful with medium to
large suppliers. Given the uncertainty in the supply process, it is not surprising that a recent survey
found that 63% of the firms had more than 100 suppliers and 17 percent of the firms had more than 500
suppliers (Chandra and Sasty 2002). In addition, the smaller supplier segment is fragmented and mostly
rural in nature which makes procurement more difficult. The solution to managing such a diverse base
relies heavily on empowering the smallest of the suppliers and creating a mechanism for
disintermediation. One such approach is the creation of cooperatives. After independence the number
of cooperatives in India has steadily increased from 181000 in 1950–51 to 453000 in 1996–97 while the
membership has grown from 15.5 million to 204.5 million. These cooperatives span across a number of
industries such as dairy, textiles, cotton, housing, production, processing, finance among others. One
successful example of cooperatives in India is the case of a diary products company called Gujarat
Cooperative Milk Marketing Federation (GCMMF) that markets milk and other diary products under the
AMUL name. The procurement network for AMUL has more than 2 million dairy farmers from whom
milk is and collected at more than 10000 cooperatives which eventually deliver to the plants. This is
comparable to the consolidation of the dairy farmers association which is one of the largest
cooperatives in the US consisting of more than 25000 members from 45 states. A more recent
disintermediation and supply consolidation effort has been by the multinational Indian Tobacco
Company (ITC) in their agribusiness through an initiative called e-choupals. E-choupals are creation of
electronic portals in small villages through which farmers can get the most recent information about the
market price, the crop, weather conditions, fertilizers among others. This has enabled ITC to form a
direct link with the farmers thereby reducing several layers of the supply chain. The net effect has been
better prices and profits for the small farmers as well as lower costs and supplier proximity for ITC. This
service has reached out to 3.1 million farmers through 5050 internet kiosks in six Indian states (ITC
2005). There are significant cost benefits to procuring products and services in India for multinational
firms but they need to be careful in selecting capable partners who can not only meet their current
requirements in terms of cost and quality but have the potential to grow with them and add new
capabilities over time. While seeking smaller suppliers the best approach maybe to avoid the multiple
layers of the channel and utilize the electronic media to link with them in an efficient manner.
Procurement challenges for firms procuring items from outside India are complicated by complex tariff,
import and taxation policies. Since the Indian economy was regulated to a great extent until the recent
past, the imports and exports were closely related. For example, the government would regulate what
percentage of parts that go into the final product could be imported from abroad. This often correlated
with factors such as the percentage of final production that is exported and whether the product was a
luxury good or not. Further, long delays in customs and port handling often made it very hard for firms
to operate under a lean inventory system. With the opening up of the economy and relaxation of some
of these limits, firms today have much greater flexibility in what they import (procure from overseas),
how they process those parts and what they can (or not) sell within India. The bottlenecks in the ports is
far from solved. The government in its most recent initiative is trying improve the transportation
infrastructure in the country with focus on rail, sea, road and air. 3.4 Production Tybout (1998) finds that
it is typical in less developed countries for a large number of small scale firms to operate together with a
few very large firms. India is no different in that context. The number of manufacturing firms in the
organized sector (those that are registered with the government) is estimated at 127,000 whereas the
unorganized sector consisted of 17 million firms. Small and very small firms which comprise majority of
the unorganized sector make products in food, tobacco, lumber, textile and apparel sector. The situation
is very similar in the service sector. For example, the retail sector is dominated by small mom and pop
stores. The concept of superstores and malls are only beginning to appear and are mainly restricted to
the big cities. Traditional emphasis of Indian firms in both manufacturing and service sector has been on
cost. Indian firms have tried to utilize the low cost of operations (both labor and overhead) to compete
aggressively in the global market.
Take for example, the software sector, where Indian firms for the last twenty years have competed
mostly in terms of being able to deliver software professionals and as a result software projects at a
fraction of the cost of that in a developed country. It is only in the last ten years that we observe that
several of these firms claim the very best software development processes and are competing in terms
of quality and innovation in addition to cost and timeliness. As a result, locations like Bangalore, Pune,
Hyderabad and Chennai are becoming software and technological hotbeds where the best of the firms
such as Microsoft, Intel and Google want to be. This facilitates tapping the best talent for their firms as
well as create intellectual property through cutting edge research and development centers. The story is
very similar in the manufacturing sector where thirty years ago manufacturers in India produced only for
the Indian market and had no competition from multi-nationals.
They created products for a captive market. However, today some of the Indian manufacturers are very
large in scope and compete with other multinationals in the world economy. For example, Reliance
Industries is one of the largest firms in India with annual revenues of $22 billion operates in various
sectors including exploration and production (E&P) of oil and gas, refining and marketing,
petrochemicals (polyester, polymers, and intermediates), textiles, financial services and insurance,
power, telecom and information and communication initiatives. Reliance Industries exports its products
to more than 100 countries in the world, itself being a multinational firm. In the last thirty years, firms in
the manufacturing sector have adopted better processes thereby producing the very best quality of
products as well as have developed competencies in terms of speed of delivery, planning as well as new
product development. One of the biggest impediments related to the production environment in India
relates to limited (or lack of adequate) infrastructural support.
For example, it is common even for the the industrialized zones to suffer from frequent power outages,
inadequate water supply and poor roadway connections. This causes unexpected delays in production
as well as prevents firms from attaining their best performance. Firms often have to create a
contingency plan for basic infrastructural needs.
For example, it is not uncommon for firms in the service sector to invest heavily in backup power so
that the operations inside receive uninterrupted power supply. Similarly, firms often run their buses to
pickup and drop their employees because the public transport system is quite unreliable and many
people cannot afford (or do not want to use) to drive to office in their personal vehicles. While running a
production or service facility in India it is very important to plan for contingencies that may arise due to
poor infrastructure. In addition, firms need to pay close attention to the unique needs of the employee
base which could be related to transportation, recreation, household activities- like baby sitting services
or traditional economic incentives that will keep the employees loyal to the organization.
3.5 Delivery Delivery of products and services depends on distribution and sales which rely on the
transportation possibilities, warehouse choices as well as the retail store coverage. In most developed
countries, the retail market is dominated by organized retailing. In US the share of organized retailing is
estimated to be around 80%. Europe has an organized retailing share of 70%, Brazil – 40% and China –
20%. The top 50 retailers in the US control almost 36% of the organized retail. India lags behind by a
large margin in organized retailing with only 2% of the total sales controlled by the organized retailing
although there are 6 million retail outlets in total (India 2005).
It is estimated that there is no organized marketing and distribution in 87 per cent of India’s villages,
which are homes to 50 per cent of the rural population. As a result, large firms often have to create
dispersed supply chains to enable them to produce and sell across the country. To give an example,
Hindustan Lever Limited, a very large consumer product manufacturer covers an urban population of 1
million retail outlets and a rural market consisting of 50,000 villages through its supply chain network
that consists of about 80 factories, 150 outsourcing units, 2000 suppliers and 5000 distributors. Market
penetration of products across the country is a daunting logistical challenge due to poor infrastructure
and prohibitive costs of customer acquisition, particularly in rural areas. The dispersed population and
the lack of cost effective modes for distribution have influenced firms in India to use multiple tiers in the
distribution network. It is quite common for manufacturing firms to first ship products to their depot
from where it is taken to a local distributor who then suppliers retailers in a region who finally sell it to
the end customer. In some cases, where the firm does not operate its own depots, it employs a carrying
and forwarding agent (C&F) who then suppliers to the local distributor. The role of these players in the
distribution channel is extremely important because most of the retail stores can stock only 5–10 units
of a given stock and often stock competing brands together in a small space. As a result, it is the
distributors and sales agents who need to convince the retailer about stocking their products as well as
making sure that their items are replenished in a timely fashion at the retail stores. Given the important
role of the different parties in the distribution channel, their profit margins are also high. It is typical for
a local distributor to have 5–10% margin while a C&F agent may make 2–4%. Multiple layers in the
distribution network impact the final price the customer has to pay for the product. The taxation
structure in India is also complex with products typically being taxed twice. Once by the central
government and the other by the state government. Such complex interstate tax laws do not enable the
firms to optimize the distribution network on pure logistics alone. For example, following the traditional
hub and spoke model to distribute goods is not even a viable option in several cases. As a result, firms in
India sometimes need to setup multiple warehouses within the same state even though it was not
logistically a sound practice.
To mitigate these problems the Indian government recently adopted the value added tax structure
(called VAT) from the 1st of April 2005. However, only 20 of the 28 states have implemented VAT. The
trucking industry which carries most of business related transportation within India is also highly
fragmented with 2.7 million commercial fleet operated by over half a million fleet operators (ET 2005).
Although outsourcing of logistical activities to third party firms is on the increase, there are very few
organized third party logistics providers in India. Those that are operating are mainly in the trucking
industry. A recent survey conducted by a leading Indian business daily found that many of the 3PLs in
India lacked the scale and financial support to provide value added services such as inventory
management and order processing. As the industry evolves and firms strive to become more efficient in
the distribution and transportation, it is clear that such value added services will be in great demand.
For firms exporting out of India another big challenge relates to the lack of modern handling facilities at
the airports and sea ports. This could be a major handicap for the firm since in today’s global supply
chains, speed is of essence. Further, complex governmental tariffs as well as import-export restrictions
often delay shipments in and out of the country to a great deal. Some of the ports lack enough space
and materials handling capability due to which at peak periods the waiting times could be several
magnitudes higher than a modern port in other parts of the world. More recently, the issue of security
in global transportation has become very important. As the Indian ports are modernized, close attention
needs to be placed on this dimension in addition to improving wait times and increasing handling
capacity. Distribution in India is still a traditional industry and when firms enter the Indian market, their
distribution channel strategy can make or break their success. The ability to reach the billion people in
the market depends critically on how well distribution is planned and executed.
Q.4)India`s Public Distribution System (PDS) with nearly 1 million outlets provides a
‘Safety Net’ to the Poor. It is unique & has no equivalent comparison in the
world.
How can it be further improved & strengthened ?
India’s Public Distribution System (PDS) has been the anchor of its food security safety net programs for
decades. At present, several features of the PDS limit beneficiary access to entitlements, made evident
by the unfolding of the COVID-19 crisis. In this blog, Devesh Roy from the International Food Policy
Research Institute (IFPRI), and Mamata Pradhan, a Research Collaborator with IFPRI, advocate for
reforming the PDS to take account of changing employment patterns. They suggest adaptation to a
ration card that permits both portability and divisibility of entitlements, allowing migrant workers and
others separated from their families to avail of the PDS to ensure food security. Other reforms are also
discussed, such as a shift to DBT, strengthening of inbuilt grievance redressal mechanisms, and provision
of information, all of which could also help shift the bargaining power from PDS dealers to the
beneficiaries.Kalyani Raghunathan series co-editor and Research Fellow, Poverty, Health, and Nutrition
Division (PHND), IFPRI.
In times of crises, such as the one presented by COVID-19, advocating for universality of safety nets may
seem somewhat prosaic. Even the Pope in his Easter Letter proposed that it might be time to introduce
a universal basic income (UBI). The Supreme Court of India recently made several cogent arguments
about universalization of the Public Distribution System (PDS), though it stopped short of passing an
order, deeming it a ‘policy issue’ that only the government can take a call on. At the same time, the
Court asked the Centre to consider the feasibility of 'temporarily' adopting the 'One Nation, One Ration
Card' (ONORC) scheme during the ongoing situation to enable economically weaker sections and
migrant workers stranded in different places to access food from any ration shop of their choice across
the country.
These judgements point to COVID-19 and lockdown-specific lessons for the PDS to adapt. The mass
exodus of migrants to their villages, with no prospect of income or food, highlights how crises such as
the current one can disproportionately affect vulnerable groups, particularly when adequate
institutional structures are not in place. With PDS benefits tied to their place of origin, migrant workers
in urban areas across the country have been left without access to their entitlement to food.
In response to COVID-19, some states have introduced free food grains for all. While commendable, the
system requires those without ration cards to apply for an e-coupon using a website to register
themselves. This is a far-from-ideal system for a crisis-time safety net, especially one that is
predominantly targeted at those with few resources and low levels of technological literacy.
The current crisis highlights many such inefficiencies in the delivery of India’s welfare programs. While
the demand for safety nets has raced ahead, program adjustments must cater to heterogeneous needs,
migration patterns, and lack of identification documents. Given the COVID-19 situation and its wide-
ranging economic impacts, it is worthwhile revisiting the systemic problems in the PDS and examining
ways to accelerate recovery.
The PDS is the world’s largest food subsidy program and has been the cornerstone of India’s social
safety net programs. The National Food Security Act (NFSA) of 2013 further broadened the scope of PDS
by raising the level of subsidies, expanding coverage, and emphasizing demand, especially in the choice
of the food basket. Yet, the PDS has been plagued with charges of corruption, overpricing and delivery
of low-quality grains. Even post-NFSA, significant power asymmetries reflected in the poor delivery of
services, time-consuming bureaucratic procedures and ineffective grievance redressal systems
characterize the system.
Addressing some of these problems could induce a shift in bargaining power in favor of the
beneficiaries. It could also make PDS more resilient, with a greater inbuilt capacity to deal with shocks.
Without questioning the imperative of casting as wide a net as possible to ensure access to food during
these times, there are both medium- and long-term lessons on the PDS that can be drawn from the
COVID-19 crisis.
ONORC was launched in January in 12 states and will be extended to 20 states by June 2020. Given the
low bargaining power of migrants, the costs of accessing PDS are generally steeper for migrant families
because of costs (in form of bribes) associated with getting a ration card. By doing away with eligibility-
related costs, the ONORC could benefit migrants significantly and help shift the bargaining power to
beneficiaries.
While ONORC provides for portability of benefits, what the current crisis vividly delineates is that
portability needs must be complemented with divisibility in the entitlements. Nearly 40 million internal
migrants stranded in cities far from their families have contingent needs. One way of meeting these
would be to allow small portions of the PDS rations to be seamlessly obtained by different individuals,
within a family, located in different parts of the country. ONORC should turn into ONODRC i.e. One
Nation One Divisible Ration Card.
Safety nets should deliver on food access, not aim to deliver food
While ONORC has the potential to improve outcomes, particularly for the vulnerable groups, it may
perhaps be opportune to ask if Direct Benefit Transfer (DBT) could be more effective in times like COVID-
19. A DBT or a food stamp program would augment consumer sovereignty and expand their choices as
they could then access both fair price shops and non-PDS outlets. The importance of more choices for
beneficiaries could not have been underscored at a more critical time as this pandemic.
To ensure smooth functioning, existing systems of inspections and grievance redressal mechanisms
constituted within the PDS or in local government structures need to be strengthened. Evidence from
earlier research shows that compromises in entitlements are common, inspections are few and
grievance redressal mechanisms seldom utilized. Going forward, it is important that grievance redressal
be enforced, and is not just on paper.
Some welcome changes have been recently observed. The Delhi High Court has directed the
government to post complaint boxes at every PDS and non-PDS food distribution center. During the
lockdown period, Bihar’s government cancelled licenses of 36 PDS outlets, suspended 127 dealerships
and lodged FIRs against 144 outlets. In Jharkhand, PDS dealers were using ration cards as collateral
when the relief packages were announced with greater allocation. These are just a few cases that have
come to light.
COVID-19 accentuates the role of seamless and pertinent information flow within the PDS. As the
government allocates free rations for distribution, there is a rising potential for arbitrage by dealers, and
the proposed relief measures present a challenge for governance. Hence, as part of governance reform,
creating a knowledge base and disseminating information to households could be very important.
India should learn from its past successes. For example, in Chhattisgarh, multiple measures have been
taken to improve beneficiary knowledge. Similarly, in Bihar, the information on time and quantity of
grain release is publicly available, possibly preventing the dealer or other brokers who otherwise seek
rent by posturing that information on grains movement and availability as chimerical. These past
experiences point to first-order effects of keeping consumers informed that could prove crucial in this
pandemic.
In recovering from this crisis, there are indeed no magic bullets. Yet, if long-overdue changes to
programs like the PDS are made, these social safety nets could be made more cost-effective in delivery,
both during and after the pandemic, thereby succeeding in turning a crisis into an opportunity.