TECHNICAL DATA SHEET:

BEAM CLAMPS
C-CLAMP & JR TOP BEAM CLAMPS

AF C-Clamp Beam Clamp AF Jr Top Beam Clamp

The C-Clamp is used to attach threaded rod to the
bottom flange of a beam. Hardened steel cup point
AF Wide Mouth Top Beam Clamp
set screw secures clamp to beam. The top beam clamp is designed to suspend threaded rod from the
top flange of a beam or bar

STEEL C-CLAMP: KEY BENFITS

§§ Carbon Steel §§ FM Approved
§§ With Lock Nut §§ Available in Plain and Electro-Galvanized
§§ UL® Listed

STEEL C-CLAMP: DIMENSIONAL DATA

Plain Carbon Steel
Materials/Finishes
Electro-galvanized
Plain Carbon Steel with Locknut
Electro-galvanized with Locknut
Variants
T-304 Stainless Steel with Locknut
T-316 Stainless Steel with Locknut
Designed for attaching hanger rod to the bottom flange of a beam. Features the ribbed design for added strength. Hardened
Service
steel cup point set screw secures clamp to beam.
UL - U.L.C. listed 3/8 and 1/2 (1/2 for 4” IPS max) with locknut only.
FM approved (excluding stainless steel) for 3/8 only with and without locknut.
Approvals
Complies with Federal Specification WW-H-171-E (Type# 23), A-A-1192 A (Type# 23), Manufacturers’ Standard Society SP-58
and MSS SP-69 (Type# 23).
Notes See MSS SP-69 for proper set screw torque recommendations
www.allfasteners.com | Customer Service 800 577 3171

Doc: BeamClampsTDS | Version Date: 04/18/19 | Page 1 of 4

 TECHNICAL DATA SHEET:

BEAM CLAMPS
C-CLAMP & JR TOP BEAM CLAMPS

800 243 4844

[email protected]
DIMENSIONAL DATA (CONT'D)

WGT EACH (lbs) MAX

Max
Rod Size Set REC
C D E F Pipe Plain Plain
A Screw LOAD
Size (w/o nut) (w/ nut) (lbs)
3/8-16 3/8-16 2-3/8 2-3/8 1 3/4 4 .38 .40 400
1/2-13 3/8-16 2-3/8 2-3/8 1 3/4 4 .38 .40 500 F C
E
5/8-11 1/2-13 2-3/8 2-5/16 7/8 3/4 5 .56 .60 550
3/4-10 5/8-11 2-3/8 2-5/16 7/8 3/4 6 .60 .68 630
7/8-9 3/4-10 3 3-5/16 1-1/4 1-3/16 8 1.76 1.88 900

A
D

ORDERING INFORMATION
ROD SIZE SET
A SCREW

PART # ROD SIZE FINSIH QUANTITY / CASE 3/8-16 3/8-16

1/2-13 3/8-16
5/8-11 1/2-13
6CCPL038LN 3/8 PLAIN 100 / CASE 3/4-10 5/8-11
7/8-9 3/4-10
6CCGV038LN 3/8 ELECTRO-GALVANIZED 100 / CASE
6CCGV012LN 1/2 ELECTRO-GALVANIZED 50 / CASE

JR TOP BEAM CLAMP: KEY BENEFITS

§§ Malleable Ironl §§ FM Approved
§§ With Lock Nut §§ Available in Plain and Electro-Galvanized
§§ UL® Listed

PROJECT INFORMAT
Project:
JR TOP BEAM CLAMP: DIMENSIONAL DATA Address:
Contractor:
Plain Malleable Iron: 3/8" - 7/8" Engineer:
Electro-Galvanized: 3/8" -7/8" Date:
Materials/Finishes
T-304 Stainless: 1/4" - 3/4" Approved Approved as Noted N
T-316 Stainless: 1/4" - 3/4"
Plain Malleable Iron: Domestic 3/8" - 3/4"
Variants
Electro-galvanized: Domestic 3/8" - 3/4"
Designed to attach hanger rod to the top or bottom flange of a beam or bar joist where flange thickness does not exceed 5/8 of
Service
an inch.
U.L. - U.L.C. listed 3/8 and 1/2 (1/2 for 4” IPS max). FM approved for 3/8 only. Complies with Federal Specification A-A-1192 A
Approvals
(Type# 19) and Manufacturers’ Standardization Society MSS SP-58 and SP-69 (Type# 19).
Set screw is of hardened steel. See MSS SP-69 for proper set screw recommendations. Stainless steel beam clamps are
Notes
recommended for corrosive environments.

www.allfasteners.com | Customer Service 800 577 3171

Doc: BeamClampsTDS | Version Date: 04/18/19 | Page 2 of 4

 TECHNICAL DATA SHEET:

BEAM CLAMPS
C-CLAMP & JR TOP BEAM CLAMPS

800 243 4844

[email protected]
DIMENSIONAL DATA (CONT'D)
B
F
D
Max MAX REC MAX REC
Rod Size Set WGT Each
B C D E F Pipe LOAD (lbs) LOAD (lbs)
A Screw (lbs)
Size TOP BOTTOM 3
1/4-20 3/8-16 1-5/16 1-1/2 1/2 1 7/8 - 0.340 - - 4" C

3/8-16 3/8-16 1-5/16 1-1/2 1/2 1 7/8 4 0.320 610 610

1/2-13 3/8-16 1-5/16 1-1/2 1/2 1 7/8 4 0.320 750 1130
5/8-11 3/8-16 1-3/4 1-3/4 5/8 1-3/8 1-1/8 5 0.580 750 1130
3/4-10 3/8-16 1-7/8 1-7/8 5/8 1-3/8 1-3/8 6 0.820 750 1130 A
7/8-9 1/2-13 2-3/8 1-7/8 5/8 1-3/8 1-3/8 8 0.795 750 1130

ORDERING INFORMATION ROD SIZE

A
SET
SCREW
B

1/4-20 3/8-16 1-5/16

3/8-16 3/8-16 1-5/16
PART # ROD SIZE FINSIH QUANTITY / CASE 1/2-13 3/8-16 1-5/16
5/8-11 3/8-16 1-3/4
6JBPL038 3/8 PLAIN 100 / CASE 3/4-10 3/8-16 1-7/8
7/8-9 1/2-13 2-3/8
6JBPL012 1/2 PLAIN 100 / CASE
6JBGV038 3/8 ELECTRO-GALVANIZED 100 / CASE
6JBGV012 1/2 ELECTRO-GALVANIZED 100 / CASE
6JBGV058 5/8 ELECTRO-GALVANIZED 50 / CASE
6JBGV034 3/4 ELECTRO-GALVANIZED 50 / CASE

WIDE MOUTH BEAM CLAMP: KEY BENEFITS

§§ Malleable Ironl §§ FM Approved

§§ With Lock Nut §§ Available in Plain and Electro-Galvanized
§§ UL® Listed
PROJECT INFORM
Project:
Address:
Contractor:
Engineer:
Date:
Approved Approved as Noted

www.allfasteners.com | Customer Service 800 577 3171

Doc: BeamClampsTDS | Version Date: 04/18/19 | Page 3 of 4

 TECHNICAL DATA SHEET:

BEAM CLAMPS
C-CLAMP & JR TOP BEAM CLAMPS

WIDE MOUTH CLAMP: DIMENSIONAL DATA

Plain Malleable Iron

Materials/Finishes
Electro-Galvanized
Plain Malleable Iron: Domestic 3/8" x 1/2"
Variants
Electro-galvanized: Domestic 3/8" - 1/2"
Service Designed to attach hanger rod to the top or bottom flange of a beam or bar.
U.L. - U.L.C. listed 3/8” and 1/2” (1/2 for 4” IPS max). FM approved for 3/8” only. Complies with Federal Specification A-A-1192A
Approvals
(Type# 19) and Manufacturers’ Standardization Society MSS SP-58 and SP-69 (Type# 19). 800 243 4844
Notes See MSS SP-69 for proper set screw torque recommendations. [email protected]

B
F
D

1
14" C

Max MAX REC MAX REC

Rod Size Set WGT Each
B C D E F Pipe LOAD (lbs) LOAD (lbs)
A Screw (lbs)
Size TOP BOTTOM
A
3/8-16 3/8-16 1-3/8 2 1/2 1 7/8 4 0.55 610 610
1/2-13 3/8-16 1-3/8 2 1/2 1 7/8 4 0.56 750 1130
5/8-11 3/8-16 1-7/8 2-3/8 5/8 1-3/8 1-1/4 5 0.66 750 1130
3/4-10 3/8-16 1-7/8 2-3/8 5/8 1-3/8 1-1/4 6 0.83 750 1130 E

ROD SIZE SET B C

A SCREW

3/8-16 3/8-16 1-3/8 2

ORDERING INFORMATION 1/2-13 3/8-16 1-3/8 2
5/8-11 3/8-16 1-7/8 2-3/8
3/4-10 3/8-16 1-7/8 2-3/8

PART # ROD SIZE FINSIH QUANTITY / CASE

6TBPL038 3/8 PLAIN 100 / CASE
6TBGV038 3/8 ELECTRO-GALVANIZED 100 / CASE
6TBGV012 1/2 ELECTRO-GALVANIZED 50 / CASE

PROJECT INFORMATIO
Project:
Address:
Contractor:
Engineer:
Date:
Approved Approved as Noted Not
www.allfasteners.com | Customer Service 800 577 3171

Doc: BeamClampsTDS | Version Date: 04/18/19 | Page 4 of 4