CANDIDATE NAME:

TLILIC2001 KNOWLEDGE QUESTIONS

This document should be completed with reference to the Course Workbook. .

1. Can I operate a forklift if I don’t have a licence? 12. What can happen if a forklift truck is refuelled while
the engine is running?
2. You have passed your High Risk Licence test, how
many days do you have to put in your application 13. What must you do when working at night?

***** ALL PAGES TO BE BROUGHT TO YOUR FACE-TO-FACE TRAINING & ASSESSMENT *****
after receiving your certificate or Assessment
Summary (AS1)?
14. Why must you be careful of ‘rear end swing’?
3. What will happen if you don’t renew your licence
within 12 months of the date it expires?
15. How should pedestrian access be restricted when
4. Your employer might ask you to show evidence of operating a forklift?
competency before you can do high risk work.
What evidence might you need to show?
16. What can you use when you are unable to fence the
area off from pedestrian access?
5. What are your responsibilities when using a high
risk work vehicle?
17. What precautions should be taken when operating
on wet or slippery surfaces?

6. You can be punished (penalised) for not doing high

risk licence work safely.
18. Why must you charge batteries in a well- ventilated
What might the punishment be? area?

19. Who might you need to talk to about site hazards

7. An operator must use a logical sequence of steps before you start work?
to maintain safety in the workplace, this is called
the ‘Hierachy of Control’.
What is the logical sequence of these 6 steps? 20. Why is it important to talk to others about site
hazards before commencing work?

8. When is the best time to ensure your equipment is 21. List eight (8) worksite hazards you need to consider

and plan for.
safe to use?

9. Why would you not use an internal combustion

engine in a confined space?
22. What are three (3) traffic control measures that you
could use to protect pedestrians or other workers,
10. What type of forklift truck would you use in a when operating a forklift truck?
confined space?

11. What specific guards are fitted to a forklift truck to 23. What are the minimum safe distances?
protect the operator?
Up to 132,000 volts
Between 132,000 & 330,000 volts
Above 330,000 volts

RAISE Training - Provider Number 91655 TLILIC2001 Knowledge Questions

Phone: (02) 8712 4108 23 November 2017 Page 1 of 3
 CANDIDATE NAME:

TLILIC2001 KNOWLEDGE QUESTIONS

This document should be completed with reference to the Course Workbook. .

24. When are you allowed to make minor repairs to a 35. Why is it considered dangerous to travel with the
forklift truck? load raised, especially while turning a corner or
travelling with excessive speed?

***** ALL PAGES TO BE BROUGHT TO YOUR FACE-TO-FACE TRAINING & ASSESSMENT *****
25. What are you required to do if you cannot read 36. Is all the weight behind the Point of Balance acting
the data plate or it is missing? as a counter-weight to the load being lifted?

37. Are you allowed to add additional counterweights to

a forklift truck.
26. While conducting a routine check you discover a
leak coming from the hydraulic system.
What precautions should you take? 38. You are required to move a load down a ramp. What
direction should the load be facing?

27. What is meant by the term 'Rated Capacity'? 39. You are required to transfer a load from a dock into
a truck. What should you use?

40. Why must you centralise the side-shift attachment

28. What is meant by the term 'Load Centre Distance'? after each time it has been used?

29. List ten (10) things you would check on a forklift 41. What is the purpose of a seat belt?
truck prior to starting work?

42. List at least six (6) things you should think about

(other than hazards) when planning your travel
path.

30. List at least six (6) item that you would check while
conducting a routine post-start check on your 43. List at least four (4) ways you might have
forklift truck? instructions communicated to you in the workplace?

44. What should you do before attempting to lift a

31. How can you determine the weight of a load? pallet of goods that appears to be unsafely loaded?

32. Where is the point of balance (fulcrum) of a forklift 45. When are you allowed to carry passengers on a
truck? forklift truck?

33. Who should be involved in workplace

communication? 46. Are you permitted to raise or lower a load near or
over other personnel?

34. Are you legally able to carry a load on only one

fork arm of the forklift truck?

RAISE Training - Provider Number 91655 TLILIC2001 Knowledge Questions

Phone: (02) 8712 4108 23 November 2017 Page 2 of 3
 CANDIDATE NAME:

TLILIC2001 KNOWLEDGE QUESTIONS

This document should be completed with reference to the Course Workbook. .

47. When driving a forklift, if your view is obstructed, 60. How can a forklift truck tip over frontwards or
what would do before you move? backwards while travelling? List at least 4 conditions.

***** ALL PAGES TO BE BROUGHT TO YOUR FACE-TO-FACE TRAINING & ASSESSMENT *****

48. How can you work closer that the minimum
distances when working near power lines? 61. Whilst working you accidentally come into contact

with an electrical source. List at least 3 actions, in
order, which you will take to get clear and ensure the
safety of those around you.
49. What can be used on power lines as a warning
device?

50. How is the forklift affected if you pick up a load 62. You are required to park your forklift truck on an
which is not hard up against the heel of the fork inclined surface. What additional precautions must
arms and the load centre distance is increased? you take?

51. Who should you talk to if you need to find out the 63. What should you do if you notice a defect or fault
voltage of overhead power lines? with the forklift truck during your post operational
check?

52. Why must you ensure that air-filled tyres are

correctly pressurised?
64. Are you required to remove the ignition key after the
end of your shift or whenever you leave the forklift?
53. What checks do you do on forklift tyres?

65. What are the ‘normal’ parking procedures?

54. Why should load movement be constantly
monitored?

55. If there is an emergency, what communication

must take place? 66. List at least four (4) locations where you should not
park your forklift truck?

56. Which vehicles must you give right of way to

during emergency situations?

APPLICANTS DECLARATION
57. What should an operator do in the event of the TO BE ACKNOWLEDGED AND SIGNED BY APPLICANT
forklift tipping over? This declaration is to be made by the applicant before
attendance to the face-to-face course.
58. When staking loads, what three (3) things must WITHOUT THIS COMPLETED, YOU WILL MAY NOT QUALIFY
you consider when stacking items on top of each FOR ASSESSMENT.
other Please tick, if correct:
[ ] I have reviewed all of the training ,material provided
[ ] I have answered all of the questions on this document
[ ] I believe I am ready for my theory assessment

59. How can a forklift truck tip over sideways while
travelling? Name Signature
List at least 4 conditions.

Date:

RAISE Training - Provider Number 91655 TLILIC2001 Knowledge Questions

Phone: (02) 8712 4108 23 November 2017 Page 3 of 3