Itp582b-515-01-Ib 2
Itp582b-515-01-Ib 2
V: 515-01
ITP582
37“ HD Sound Bar with Built-in Subwoofer
For the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com
Warnings and Precautions
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WARNING: Lithium batteries, like all rechargeable batteries
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. are recyclable and should be recycled or disposed of in
normal household waste. Contact your local government
WARNING: To reduce the risk of fire or electric shock, for disposal or recycling practices in your area. They
do not expose this apparatus to rain or moisture. should never be incinerated since they might explode.
AVERTISSEMENT: Pour réduire le risque WARNING: Shock hazard - Do Not Open.
d’incendie ou de choc électrique, ne pas exposer
cet appareil sous la pluie et l’humidité. AVIS: RISQUE DE CHOC ÉLECTRIQUE - NE PAS OUVRIR
CAUTION: Use of any controls or adjustments or Mains Plug or Direct plug-in adapter is used as
performance of procedures other than those herein disconnect device and it should remain readily
specified may result in hazardous radiation exposure. operable during intended use. In order to disconnect
the apparatus from the mains completely, the Mains
WARNING: Changes or modifications to this unit not Plug or Direct plug-in adapter should be disconnected
expressly approved by the party responsible for compliance from the mains socket outlet completely.
could void the user’s authority to operate the equipment.
La fiche d’alimentation ou adaptateur de courant
WARNING: Do not place the unit on top of any soft, est utilisé comme dispositif de déconnexion et doit
porous, or sensitive surfaces to avoid damaging rester accessible pendant l’utilisation. Pour mettre
the surface. Use a protective barrier between l’appareil hors tension, la fiche ou adaptateur de
the unit and surface to protect the surface. courant doit être débranché de la prise de courant.
WARNING: Use of this unit near fluorescent lighting Do not mix old and new batteries.
may cause interference regarding use of the remote.
If the unit is displaying erratic behavior move away Do not mix alkaline, standard (carbon-zinc), or
from any fluorescent lighting, as it may be the cause. rechargeable (ni-cad, ni-mh, etc) batteries.
2
Important Safety Instructions
1. Read these Instructions.
FCC Warnings
2. Keep these Instructions.
WARNING: Changes or modifications to this unit not expressly
3. Heed all Warnings. approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
4. Follow all instructions.
NOTE: This equipment has been tested and found to comply with
5. Do not use this apparatus near water. the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
6. Clean only with a dry cloth. against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy
7. Do not block any ventilation openings. Install in and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
accordance with the manufacturer’s instructions. there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
8. Do not install near any heat sources such as radio or television reception, which can be determined by turning
radiators, heat registers, stoves, or other apparatus the equipment off and on, the user is encouraged to try to correct the
(including amplifiers) that produce heat. interference by one or more of the following measures:
9. Do not defeat the safety purpose of the polarized • Reorient or relocate the receiving antenna.
or grounding - type plug. A polarized plug has two • Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
blades with one wider than the other. A grounding
that to which the receiver is connected.
type plug has two blades and a third grounding • Consult the dealer or an experienced radio/TV technician for help.
prong. The wide blade or the third prong are
provided for your safety. When the provided plug
does not fit into your outlet, consult an electrician Additional Warnings
for replacement of the obsolete outlet. The apparatus shall not be exposed to dripping or
splashing and that no objects filled with liquids, such as
10. Protect the power cord from being walked on or
vases, shall be placed on apparatus.
pinched particularly at plugs, convenience receptacles,
L’appareil ne doit pas être exposé aux écoulements ou aux
and the point where they exit from the apparatus.
éclaboussures et aucun objet ne contenant de liquide, tel
11. Only use attachments/accessories qu’un vase, ne doit être placé sur l’objet.
specified by the manufacturer.
Battery shall not be exposed to excessive heat such as
sunshine, fire or the like.
12. Use only with a cart, stand, tripod, Les piles ne doivent pas être exposées à de forte chaleur,
bracket, or table specified by the tel qu’à la lumière du soleil, au feu ou autres choses de
manufacturer, or sold with the apparatus. semblable.
When a cart is used, use caution when
moving the cart/apparatus combination to Caution marking is located at the rear
avoid injury from tip-over. or bottom of the apparatus.
Attention marquage est situé sur le paneau
13. Unplug this apparatus during lightning storms arrière ou inférieur de l’unité.
or when unused for long periods of time.
The marking information is located at
14. Refer all servicing to qualified service personnel. the rear or bottom of apparatus.
Servicing is required when the apparatus has Le marquage est situé sur le paneau
been damaged in any way, such as power-supply arrière ou inférieur de l’unité.
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, This symbol indicates that this
product incorporates double insulation
does not operate normally, or has been dropped.
between hazardous mains voltage
and user accessible parts.
Special note: When placing your unit on a lacquered or
natural finish, protect your furniture with a cloth or other
protective material.
Setup
Power Remote
AC power: built-in AC power cable Requires 2 AAA batteries (included)
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES AND DHHS
STANDARDS 21 CFR SUBCHAPTER J. AT DATE OF MANUFACTURED.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
4
Table of Contents
Warnings and Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Important Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
ITP582. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Features
Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Power
Remote
Includes
Table of Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Clock and Alarm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Setting the Clock
Auto Time Sync for iPod and iPhone
Setting the Alarm
Activating the Alarm
iPod and iPhone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Docking an iPod or iPhone
Radio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Tuning the FM Radio
Playing an iPod or iPhone
Saving a Station as a Preset
Tuning to a Preset FM Radio Station
Audio Inputs, Sub Out, & Video Outputs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Line Input
RCA Stereo Inputs
Using the Optical Input
Component Video Output
Using the Subwoofer Output
Learn Feature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Understanding the Learn feature
Using the Learn Feature
Mounting to a Wall. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Important Notes
Required Tools
Included Hardware
Company Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
International Support
Contact Information
Warranty
Compatibility
Green Initiative
Source
Press to switch between
iPod/iPhone, FM
radio, Aux, Optical,
and Line modes.
Volume
Press to adjust the volume.
Learn
Press to begin using
the learn function.
Line Input
6
Power
Press to turn the sound bar off or on. Number Keypad
Alarm Mute
With the power off, press to Press to mute the volume
set and activate the alarm. of the sound bar.
Clock Mem
With the power off, press Press to save the current FM
to set the clock. radio station as a preset.
Sleep ALARM
Menu
Press repeatedly to set the sleep timer. Press to access the menu on
a docked iPod or iPhone.
Display
Press to switch between the clock Menu Up/Down for iPod
and current mode display. MEM Press to navigate the menu on
a docked iPhone or iPod.
DISPLAY
Bass
Press to adjust the bass. Treble
MENU
Press to adjust the treble.
Rev/Fwd for iPod/Min/Hr
Press to rewind or fast forward Select
content from a docked iPhone or Press to make a selection on
iPod. Press to adjust the minute or a docked iPhone or iPod.
hour when setting the clock or timer.
Music
News Press to switch to the EQ
Press to switch to the EQ optimized for music.
optimized for news.
NEWS MUSIC MOVIE
Movie
Skip/Tune EQ
Press to switch to the EQ
Press to skip forwards or backwards optimized for movies.
through content on a docked iPhone
or iPod. Press to tune the FM radio. EQ
Press to cycle through FLAT, ROCK,
Album/Chapter/Playlist/Memory POP, CLASS, or JAZZ equalizer modes.
Press to cycle through albums,
chapters, and playlists on a docked Volume
iPhone or iPod. Press to adjust the volume.
Press to cycle through
preset radio stations. Play/Pause
SOURCE SHUFFLE REPEAT iPhone
Press to play or pause a
Source docked iPhone or iPod.
Press to switch between
iPod/iPhone, FM radio, Aux, iPhone
Optical, and Line modes. Press to switch to iPod/iPhone mode.
Shuffle Repeat
Press to play music from a docked Press to repeat the current
iPhone or iPod in a random order. track or entire album.
Auto Time Sync for iPod and iPhone The source on the display will begin blinking.
1. Follow the instructions for 7. Press the Fwd/Rev buttons on the remote
Docking an iPod or iPhone. to switch between iPod and FM modes.
Auto time sync will not work with all iPods. 8. Press the Alarm button to
finish setting the timer.
2. Upon initial use, the clock will automatically
sync to the time of the docked iPod or iPhone. After the set time is reached, the sound bar will
automatically power on to the set source.
After initial use, press and hold the Clock button to
sync the time from the connected iPod or iPhone.
Activating the Alarm
1. Press the Power button to turn the power off.
2. Press and hold the Alarm button to
activate or deactivate the timer.
The letter “T” will appear on the display
when the timer is activated.
8
iPod and iPhone
Docking an iPod or iPhone Playing an iPod or iPhone
1. Press the Power button to turn the sound bar on. 1. Follow the instructions for
Docking an iPod or iPhone.
2. Press the Source button to switch to iPhone/
iPod mode. (iPhone button on the remote) 2. Press the Play/Pause button to begin playing
music from the docked iPhone or iPod.
3. Gently press the iPod Drawer to open the
motorized dock for iPod and iPhone.
4. Connect the iPhone or iPod to the connector
inside the Dock for iPhone/iPod.
When the speaker is plugged in, using AC
power, the docked iPhone or iPod will charge.
Radio
Tuning the FM Radio Saving a Station as a Preset
1. Press the Power button to turn the sound bar on. 1. Follow the instructions for Tuning the FM Radio.
2. Press the Source button to 2. Press the Mem button.
switch to FM radio mode.
3. Press the Memory buttons to select
3. Press the Skip/Tune buttons on the remote a preset. (SA 01, 02, 03, etc.)
to tune the FM radio. Press and hold the
4. After you’ve selected a preset, press
Skip/Tune buttons on the remote to
the Mem button to save the current FM
search for the next available station.
radio station to the selected preset.
3. Press the Source button to switch to LINE mode. 2. Follow the instructions for
connecting RCA Stereo Inputs.
4. Use the native controls on the
connected device to begin playing audio 3. Adjust the television’s input setting
routed through the sound bar. to correspond to the inputs used
when connecting the sound bar.
RCA Stereo Inputs Note: This connection is intended for outputting
Requires an RCA audio cable (included) video played through a docked iPhone or iPod only.
1. Connect an RCA audio cable to the Stereo Using the Subwoofer Output
Audio Inputs. Connect the other end of the 1. Use an RCA cable (included) to connect an
RCA cable to the audio outputs on a DVD player, external subwoofer to the Subwoofer Output.
stereo system, gaming system, television, etc.
2. When audio is played through any
2. Press the Power button to turn the sound bar on. source, the bar speaker will automatically
3. Press the Source button to switch to AUX mode. use the connected subwoofer.
10
Learn Feature Mounting to a Wall
Understanding the Learn feature Important Notes
What is the Learn feature? We recommend having this HD Sound
The Learn feature captures remote commands Bar professionally mounted.
from your television remote, and teaches your
bar speaker to operate when these commands 1. The HD Sound Bar must be hung within
6 feet of an AC power outlet for the
are pressed. Power, volume and mute are a few
attached AC power cable to reach.
examples of commands that the bar speaker can
learn. 2. Use the included long screws and wall anchors
to attach the mounting bracket to the wall.
Why use the Learn feature? 3. Slide the HD Sound Bar onto the mounting
Teaching the bar speaker remote commands bracket, and make sure there is a firm and stable
will reduce the number of remotes needed, connection before letting go of the HD Sound Bar.
save time searching for remote codes,
and improve the ease of operation. Required Tools
• Manual or Power Screwdriver
Using the Learn Feature • Stud Finder
1. With the power Off, press the • Pencil
Learn button on the unit. • Tape Measure
• Level
The display will show “WAIT”.
2. Press the button you desire to be Included Hardware
learned on the included remote. • Wall mount bracket
For example: Volume+ • 2 Long screws
The display will show “YES”, then
continue to show “WAIT”.
3. Press the corresponding button on your remote.
The display will show “OK”, then STUDS
continue to show “WAIT”. 16”
FROM CENTER TO CENTER
4. Press the Learn button on the unit.
The unit will power off.
5. The programmed button on your remote will
WALL
now be able to control your sound bar.
Note: It is necessary to program each button
i.e. channel and volume + and - separately. MOUNTING BRACKET
Note: Not all functions of the sound bar
will be available through your own remote
control, such as bass and treble. Use the
included remote for these functions.
Note: While ITP582B is able to learn most IR
protocols, not all can be programmed.
To start over, press and hold the learn key for over
3 seconds. If the sound bar has failed to learn
a command, the display will show “ERROR”.
Copyright © 2012 Digital Products International (DPI, Inc.) | All other trademarks appearing herein are the
property of their respective owners. Specifications are subject to change without notice