Chibi Espeon Amigurumi Pattern

CHIBI ESPEON
AMIGURUMI
PATTERN
YARN COLORS
ABOUT THIS PATTERN
Light Purple
While making this amigurumi you will work in
continuous rounds, unless told otherwise. Use
a stitch maker to mark end of your rounds.
FELT COLORS
The finished amigurumi should
Purple measure approximately 9 inches tall. Size may
Dark Purple vary, depending on yarn type and personal
White yarn tension.
Red Instructions that need to be repeated will be
marked with brackets followed by the number
OTHER MATERIALS of times it needs to be repeated.
Fiber-fil stuffing Example:

Hot glue Round 4) [2 sc, inc] rep 6 times (24)
TOOLS NEEDED
IMPORTANT INFORMATION
G hook (4.0mm)
Scissors You may not claim this pattern as your own.
Yarn Needle You may not alter, copy, sell, or redistribute
Felting Needle this pattern in whole or in part.
This pattern is intended for personal use only.
If you publish photos of items made from this

pattern I ask that you please give me credit as
*Note: I use a felting needle to apply felt the original designer of the pattern. It's always
to my amigurumi. This is an optional a good idea to give credit where credit is due.
technique. If you do not have a felting
needle you can use glue instead.
1
BODY PARTS
Head
Use Light Purple. Abbreviations
Round 1) 6 sc in magic ring (6)
sc = single crochet
Round 2) inc around (12)
inc = increase (2 sc in the next sc)
Round 3) [1 sc, inc] rep 6 times (18)
hdc= half double crochet
dc = double crochet
dec = invisible decrease
sl st = slip stitch
rep = repeat
Round 10) sc around (54) Round 12) sc around (21)
Round 11) – Round 15) sc around (54) Round 13) [6 sc, inc] rep 3 times (24)
Round 16) {in Front Loops only: 3 sc, 6 inc, Round 14) sc around (24)
3 sc}, 42 sc (60) Round 15) sc around (24)
Round 17) [9 sc, inc] rep 6 times (66) Round 16) sc around (24)
Round 18) sc around (66) Finish with a slip stitch. Leave a long tail for
Round 19) [1 sc, dec] rep 6 times, 48 sc sewing. Do not stuff. Fold the ear flat.
(60)
Round 20) [3 sc, dec] rep 12 times (48)
Round 21) [6 sc, dec] rep 6 times (42) Body
Round 22) [5 sc, dec] rep 6 times (36) Use Light Purple.
Round 23) [4 sc, dec] rep 6 times (30) Round 1) 6 sc in magic ring (6)
Round 24) [3 sc, dec] rep 6 times (24) Round 2) Inc around (12)
Finish with a slip stitch. Leave a long tail Round 3) [1 sc, inc] rep 6 times (18)
for sewing. Stuff the head. When stuffing Round 4) [2 sc, inc] rep 6 times (24)
pay attention to the nose and ensure the Round 5) [3 sc, inc] rep 6 times (30)
nose is adequately stuffed to prevent Round 6) [4 sc, inc] rep 6 times (36)
wrinkling. Round 7) sc around (36)
Round 8) sc around (36)
Ear
Use Light Purple. Make two.
Finish with a slip stitch. Stuff the body. Leave a
long tail for sewing.
2
BODY PARTS
Now the legs are one piece.
Front Leg We are going to join the legs to the body.
Round 5) 8 sc, inc (10)
Round 10) sc around (12) What the legs should look like after row 16.
Round 11) – Round 15) sc around (12)
Join the Legs with the Body

Finish off the first leg with a slip stitch and
Now we are going to crochet the legs to the
stuff. Do not finish off the second leg. We are
body to make them into one piece.
going to join the two legs together with a sc
and then continue to crochet in the round
First we align the legs to the front of the
around both legs. Use the images below as a
body as seen below.
guide.
1 2
3 1- Second leg still on

hook
2- Insert hook through
any stitch on the first
leg. Next, take a long piece of Light Purple yarn
3- Make a sc to join and thread it through your yarn needle. Use
legs together. Place your yarn needle sew the legs and body
your stitch marker in together. Sew through exactly 6 stitches on
this stitch to mark the the body and 6 stitches through the legs.
end of the round. (image on next page)
Round 16) sc around both legs (24)
Do not finish off yet. Leave your stitch
marker in place.
3
BODY PARTS
What the Front Legs and Body look like
Tie off and weave in the loose ends of the

yarn you just used to sew the body and legs Front View
together.
This should leave you with 12 unused stitches
on the body piece and 18 unused stitches on
the front legs piece.
Now we will continue to crochet in the round
around the body and legs.
*Note: When counting rows to check which row you are

on, count from the bottom of the front legs up, not on
the body.
Round 17) sc around legs and body (30)

Round 18) sc around (30) Side View
Round 21) sc around (24) Thigh
Finish with a slip stitch. Finish stuffing the Use Light Purple. Make two.
united legs and body. Leave a long tail for Round 1) 6 sc in magic ring (6)
sewing. Round 2) inc around (12)
*Note: If you notice some gaping in between the front Round 4) [2 sc, inc] rep 6 times (24)
legs or on the sides of the body where we joined the Round 5) [3 sc, inc] rep 6 times (30)
separate pieces together, just take some yarn of the
Round 6) 7 dec, 16 sc (23)
same color and place a small stitch there to sew it
closed. Finish with a slip stitch. Leave a long tail for
sewing. Stuff the thigh.
4
BODY PARTS
Back Foot Eyes Lobes

Use Light Purple. Make two. The ear lobes are made in two parts, Part A
Round 1) 6 sc in magic ring (6) and Part B. They are joined together in the
Round 2) [1 sc, inc] rep 3 times (9) same way we joined the front legs together.
Round 3) sc around (9) Use Light Purple.
Finish with a slip stitch. Leave a long tail for Part A
sewing. Stuff the foot. Make two.
Tail Tip
Round 4) - Round 7) sc around (9)
Stuff as you go.
Finish with a slip stitch.
Part B
Make two.
Finish the first Tail Tip off with a slip stitch.
Do not finish off the second tail tip. We are
going to join the two pieces to form the tail.
Tail Do not finish off yet.
Using the same method as with joining the
front legs, with the second tail tip still on Join Part A and B together with a sc and
your hook, insert your hook into any stitch on continue to crochet in the round around both
the other tail tip and join them with a sc. pieces.
Continue to crochet in the round around both We will pick up the row count from Part A
pieces. Stuff as you go. Round 9) sc around (12)
Round 9) sc around (18) Round 11) [2 sc, dec] rep 3 times (9)
Round 10) [1 sc, dec] rep 6 times (12) Finish off.
Round 11) [2 sc, dec} rep 3 times (9) Do not stuff the ear lobe, keep it flat.
Finish with a slip stitch and finish stuffing the

What the ear
tail. Leave a long tail for sewing.
lobes should look
like when
finished.
5
BODY PARTS
Eyes & Nose Inner Ear

To make the eyes, cut out two almond eye To make the inner ear, cut two triangle
shapes from the purple felt. shapes from the dark purple felt and trim
For the highlights, cut out two tiny circles them up to fit the front side of the crocheted
from the white felt. ear pieces.
For the nose cut out a tiny triangle shape
from the black craft felt.
For the head jewel cut out a small circle from
the red felt.
Use the image below as a reference.
6
ASSEMBLY
Use the provided pictures of the finished Espeon as a visual aid to help guide you in the assembly
process.
1. Sew the head to the body. Note: it doesn't have to go on straight. You can slightly turn the
head to the left or right to give Espeon a more interesting pose!
2. Sew the ears to the head.
3. Sew the thighs to the sides of the lower body. Note: the side of the thighs with the consecutive
decreases should face the front.
4. Sew the back feet to the front of the thighs.
5. Sew the tail to the lower backside of the body.
6. Sew the ear lobes to the ears.
7. Apply the eyes, nose, and forehead jewel with glue or a felting needle.
Finished!
7
Finished Pictures
1UpCrochet 1UpCrochet 1UpCrochet 1UpCrochet 1UpCrochet 1UpAshe
8
Finished Pictures
Thank you!
For more patterns, check out my Etsy Shop "1Up Crochet"
For free amigurumi patterns visit my blog:
www.1upcrochet.com
9
CHIBI UMBREON
AMIGURUMI
PATTERN
YARN COLORS
ABOUT THIS PATTERN
Black
Yellow
FELT COLORS The finished amigurumi should
measure approximately 9 inches tall. Size may
Black vary, depending on yarn type and personal
Red yarn tension.
White
Instructions that need to be repeated will be
OTHER MATERIALS
of times it needs to be repeated.
Fiber-fil stuffing Example:
Hot glue Round 4) [2 sc, inc] rep 6 times (24)
TOOLS NEEDED
G hook (4.0mm)
Scissors You may not claim this pattern as your own.
Yarn Needle You may not alter, copy, sell, or redistribute
Felting Needle this pattern in whole or in part.

*Note: I use a felting needle to apply felt the original designer of the pattern. It's always
to my amigurumi. This is an optional a good idea to give credit where credit is due.
1
BODY PARTS
Head
Use Black. Abbreviations
sc = single crochet
Round 2) Inc around (12)
dc = double crochet
sl st = slip stitch
rep = repeat
Round 10) sc around (54) Round 10) in Back Loops only: sl st around (21)
Round 11) – Round 15) sc around (54) Round 11) in Back Loops only: sc around (21)
Round 16) {in Front Loops only: 3 sc, 6 inc, Round 12) [5 sc, dec] rep 3 times (18)
3 sc}, 42 sc (60) Round 13) sc around (18)
Round 17) [9 sc, inc] rep 6 times (66) Round 14) [4 sc, dec] rep 3 times (15)
Round 18) sc around (66) Round 15) [3 sc, dec] rep 3 times (12)
Round 19) [1 sc, dec] rep 6 times, 48 sc Finish with a slip stitch. Leave a long tail for
(60) sewing. Stuff the ear.
Round 21) [6 sc, dec] rep 6 times (42) Body
Round 22) [5 sc, dec] rep 6 times (36) Use Black.
Round 23) [4 sc, dec] rep 6 times (30) Round 1) 6 sc in magic ring (6)
Finish with a slip stitch. Leave a long tail
for sewing. Stuff the head. When stuffing
pay attention to the nose and ensure the
nose is adequately stuffed to prevent
wrinkling.
Ear Round 8) sc around (36)
Use Light Black and Yellow. Make two. Round 9) sc around (36)
Start with Black. Round 10) [4 sc, dec] rep 6 times (30)
Round 1) 3 sc in magic ring (3) Round 11) sc around (30)
Round 2) inc around (6) Round 12) sc around (30)
-Color Change to Yellow- Round 18) sc around (18)
Round 8) in Back Loops only: sl st around (21) Finish with a slip stitch. Stuff the body. Leave a
Round 9) in Back Loops only: sc around (21) long tail for sewing.
-Color Change to Black-
2
BODY PARTS
Front Leg Now the legs are one piece.

Use Black. Make two. We are going to join the legs to the body.
What the legs should look like after row 16.
Finish off the first leg with a slip stitch and
Join the Legs with the Body
stuff. Do not finish off the second leg. We are
Now we are going to crochet the legs to the
going to join the two legs together with a sc
body to make them into one piece.
and then continue to crochet in the round
around both legs.
First we align the legs to the front of the
**Photos shown with purple yarn. Black yarn is hard to
photograph close up! body as seen below.
1 2
3 1- Second leg still on

hook
2- Insert hook through
any stitch on the first Next, take a long piece of Black yarn and
leg. thread it through your yarn needle. Use your
3- Make a sc to join yarn needle sew the legs and body together.
legs together. Place Sew through exactly 6 stitches on the body
your stitch marker in and 6 stitches through the legs.
this stitch to mark the (image on next page)
end of the round.
Round 16) sc around both legs (24)
Do not finish off yet. Leave your stitch marker
in place.
3
BODY PARTS
What the Front Legs and Body look like
Tie off and weave in the loose ends of the 45 degree View
yarn you just used to sew the body and legs

together.
This should leave you with 12 unused stitches
on the body piece and 18 unused stitches on
the front legs piece.
Now we will continue to crochet in the round
around the body and legs.
Round 17) sc around legs and body (30)

Side View
Finish with a slip stitch. Finish stuffing the
united legs and body. Leave a long tail for
sewing.
Back Foot
Use Black. Make two.
*Note: If you notice some gaping in between
the front legs or on the sides of the body
where we joined the separate pieces
together, just take some yarn of the same
color and place a small stitch there to sew it
Finish with a slip stitch. Leave a long tail for
closed.
sewing. Stuff the foot.
*Another note: When counting rows to check

which row you are on, count from the bottom
of the front legs up, not on the body.
4
BODY PARTS
Eyes & Nose

Tail
To make the eyes, cut out two almond eye
Use Black and Yellow.
shapes from the red felt. Then, cut out two
Start with Black.
smaller oval shapes for the pupils. For the
highlights, cut out two tiny circles from the
white felt.
For the nose cut out a tiny triangle shape
from the black craft felt.
Use the image below as a reference.
-Color Change to Yellow-
Round 8) in Back Loops only: sl st around (21)
Round 9) in Back Loops only: sc around (21)
-Color Change to Black-
Round 10) in Back Loops only: sl st around
(21)
Round 11) in Back Loops only: sc around (21)
Now we are going to crochet in ROWS. Turn
your work. Do not chain one at the end of
each row.
Row 16) sc into 2nd st from hook, 6 sc (7)
Row 17) sc into 2nd st from hook, 4 sc, sl st
(6)
Finish with off. Leave a long tail for sewing.
Stuff the tail.
Thigh
Use Black. Make two.
Round 6) 7 dec, 16 sc (23)
sewing. Stuff the thigh.
5
BODY PARTS
Forehead Ring
Use Yellow.
Chain 20. Join the ends of the chain together
with a slip stitch to form a ring.
Do a slip stitch in each around the ring.
Finish off.
Body Rings
Use Yellow. Make four.
Chain 13. Join the ends of the chain together
with a slip stitch for form a ring.
Do a slip stitch in each stitch around the ring.
Finish off.
6
ASSEMBLY
Use the provided pictures of the finished Umbreon as a visual aid to help guide you in the assembly
process.
1. Sew the head to the body.

Note: it doesn't have to go on
straight. You can slightly turn the
head to the left or right to give
Umbreon a more interesting pose!
3. Sew the thighs to the sides of the

lower body. Note: the side of the
thighs with the consecutive decreases
should face the front.
4. Sew the back feet to the front of

the thighs.
7
ASSEMBLY
Use the provided pictures of the finished Umbreon as a visual aid to help guide you in the assembly
process.
5. Sew the tail to the lower

backside of the body.
6. Sew the body rings to the sides

of the arms and thighs.
7.Sew forehead ring to the forehead.

Then apply the eyes and nose with
glue or a felting needle.
Note: the bottoms of the eyes should
approximately line up with row 16 of
the head.
Finished!
8
Finished Pictures
9
Finished Pictures
Thank you!
www.1upcrochet.com
10
CUBONE
AMIGURUMI
YARN COLORS PATTERN
Suggested Colors:
Lion Brand Vanna's ABOUT THIS PATTERN
Choice: -Honey
-Linen
Red Heart Super Saver:
-Buff
FELT COLORS measure approximately 8.5 inches tall. Size
may vary, depending on yarn type and
Black personal yarn tension.
White
OTHER MATERIALS
Example:
Fiber-fil stuffing Round 4) [2 sc, inc] rep 6 times (24)
Hot glue -or- felting
needle
Black embroidery floss
TOOLS NEEDED
You may not claim this pattern as your own.
G hook (4.0mm) You may not alter, copy, sell, or redistribute
Scissors this pattern in whole or in part.
Yarn Needle
Felting Needle

*Note: I use a felting needle to apply felt
to my amigurumi. This is an optional
the original designer of the pattern. It's always
a good idea to give credit where credit is due.
1
BODY PARTS
Skull Head
Use Linen. Stuff as you go.
Abbreviations
Round 1) 6 sc in magic ring (6) sc = single crochet
Round 2) inc around (12) inc = increase (2 sc in the next sc)
Round 3) [2 sc, 2 inc] rep 3 times (18) hdc= half double crochet
Round 4) [4 sc, 2 inc] rep 3 times (24) dc = double crochet
Round 5) [6 sc, 2 inc] rep 3 times (30) dec = invisible decrease
Round 6) sc around (30) sl st = slip stitch
Round 7) -Round 11) sc around (30)
Round 12) [1 sc, inc] rep 6 times, 18 sc (36)
Round 13) [2 sc, inc] rep 6 times, 18 sc (42) Skull Tooth
Round 14) sc around (42) Use Linen. Make two
Round 15) [3 sc, inc] rep 6 times, 18 sc (48) Round 1) 3 sc in magic ring (3)
Round 16) sc around (48) Round 2) inc around (6)
Round 17) [4 sc, inc] rep 6 times, 18 sc (54) Round 3) [1 sc, inc] rep 3 times (9)
Round 19) – Round 27) sc around (54) Finish with a slip stitch. Leave a long tail for
Round 28) [7 sc, dec] rep 6 times (48) sewing.
Round 30) [5 sc, dec] rep 6 times (36) Skull Side
Round 31) [4 sc, dec] rep 6 times (30) Use Linen. Make two
Round 32) [3 sc, dec] rep 6 times (24) To make this piece we will start with a chain,
Round 33) [2 sc, dec] rep 6 times (18) then crochet around the chain.
Round 34) [1 sc, dec] rep 6 times (12) Chain 14
Round 35) dec 6 times (6) Round 1) Down the side of the chain: 12 sc,
Finish stuffing and close off. 3 sc in the next st, Up the other side of the
chain:12 sc, 3 sc in the next stitch (30)
Skull Horn Round 3) sc around (30)
Use Linen. Make two. Round 4) [4 sc, inc] rep 6 times (36)
Round 1) 6 sc in magic ring (6) Round 5) sc around (36)
Round 3) sc around in back loops only (12) Finish with a slip stitch. Do not close. Stuff
Round 4) sc around (12) the piece.
Finish with a slip stitch. Do not close. Stuff
the horn. Leave a long tail for sewing.
2
BODY PARTS
Skull Eyes Belly

Use Honey and Linen. Start with Honey. Use Buff.
Make two. Round 1) 6 sc in magic ring (6)
Start with Honey. Round 2) inc around (12)
Round 1) 6 sc in magic ring (6) Round 3) [1 sc, inc] rep 6 times (18)
Round 2) inc around (12) Round 4) [2 sc, inc] rep 6 times (24)
Round 3) [2 sc, 2 hdc in next st, 2 hdc in Round 5) [3 sc, inc] rep 6 times (30)
next st] rep 3 times (18) Round 6) [4 sc, inc] rep 6 times (36)
Round 4) [4 sc, 2 hdc in next st, 2 hdc in Round 7) [5 sc, inc] rep 6 times (42)
next st] rep 3 times (24) Round 8) [6 sc, inc] rep 6 times (48)
-Color change to Linen- Round 9) [7 sc, inc] rep 6 times (54)
Round 5) [6 sc, inc, inc] rep 3 times (30) Finish with a slip stitch. Leave a long tail for
Finish with a slip stitch. sewing.
Tail
Body Use Honey.
Use Honey. Round 1) 6 sc in magic ring (6)
Round 1) 6 sc magic ring (6) Round 2) [1 sc, inc] rep 3 times (9)
Round 4) [2 sc, inc] rep 6 times (24) Round 5) [3 sc, inc] rep 3 times (15)
Round 11) sc around (60) Round 12) [9 sc, inc] rep 3 times (33)
Round 12) sc around (60) Finish with a slip stitch. Stuff the tail. Leave
Round 13) sc around (60) open.
Round 15) – Round 19) sc around (54) Hips
Round 20) [7 sc, dec] rep 6 times (48) Use Honey. Make two.
Round 21) sc around (48) Round 1) 6 sc in magic ring (6)
Round 22) [6 sc, dec] rep 6 times (42) Round 2) inc around (12)
Round 24) [5 sc, dec] rep 6 times (36) Round 4) [2 sc, inc} rep 6 times (24)
Round 25) [4 sc, dec] rep 6 times (30) Round 5) [3 sc, inc] rep 6 times (30)
Round 27) sc around (30) Round 7) 6 dec, 18 sc (24)
Finish with a slip stitch. Leave a long tail for Round 8) sc around (24)
sewing. Stuff the body. Finish with a slip stitch. Stuff. Leave a long tail for
sewing.
3
BODY PARTS
Back Spike - Large Bone Club

Use Honey. The bone club is made by crocheting two
Round 1) 6 sc in magic ring (6) small semi-hemispheres and then joining
Round 2) [1 sc, inc] rep 3 times (9) them together. Use Linen.
Round 4) sc around (12) Bone End 1
Finish with a slip stitch. Do not stuff. Fold the Round 1) 6 sc in magic ring (6)
spike flat. Round 2) inc around (12)
Finish with a slip stitch. Weave in the tail.
Back Spike - Small
Use Honey.
Bone End 2
Finish with a slip stitch. Do not stuff. Fold the
spike flat.
Now we are going to join Bone End 1 and
Bone End 2 together. With your hook still
Foot attached to Bone End 2 (image 1), place your
Use Linen and Honey. Make two. hook through any stitch on Bone End 1
Start with Linen. (image 2). Now yarn over and make a single
Round 1) 3 sc in magic ring (3) crochet stitch (image 3). Place your stitch
Round 2) inc around (6) marker in this stitch. Continue to crochet in
Round 3) [1 sc, inc] rep 3 times (9) the round around both pieces that are now
-Color change to Honey- joined together. Stuff as you go.
Finish stuffing the foot, then close off.
1. 2.
Arm
Use Honey. Make two.
Stuff the arm. Only lightly stuff towards the
opening.
Fold the arm flat, then sc across the opening
3.
to close the arm.
4
BODY PARTS
Bone Club (continued) Eyes and Nostrils

Round 5) sc around (24) Use your scissors to cut out the shapes for
Round 6) sc around (24) the eyes and nostrils. Use the images below
Round 7) [2 sc, dec] rep 6 times (18) as a guide. It can also be very helpful to look
Round 8) sc around (18) at reference pictures of Cubone's face when
Round 9) [1 sc, dec] rep 6 times (12) making the eyes to help get the size and
Round 10) sc around (12) shapes correct.
Eyes, pupils
and highlights.
Finish stuffing and then close off.
Eyes, pupils
and highlights
layered.
Finished Bone Club
Nostril shapes
5
ASSEMBLY
Use the provided pictures of the finished Cubone as a visual aid to help guide you in the assembly
process. I recommend using pins to help plan where you want to sew parts to the body.
First we must assemble the Head/Skull.
1.Sew the Skull Side pieces to the sides

1 2
of the skull along the lower half.
2. Sew the Skull Teeth onto the Skull.
3. Sew the Horns to the Skull.
3
1
3 3
6
ASSEMBLY
4
2
4. Sew the Belly to the front of the
Body.
5. Sew the tail to the back of the body.
6. Sew the head onto the open end of

the body.
6
1
3 3
7. Sew the hips onto the lower sides of

the body.
7
ASSEMBLY
8
2
8. Sew or glue the feet under the hips
for a standing pose. -or- Position the feet
to the front of the hips for a sitting pose.
Standing Sitting
9. Sew the arms to the sides of the body,

just under the head.
10. Sew the back spikes to the back of

the body. The larger spike goes above the
small spike.
10
1
3 3
7. Sew or glue the Bone Club to

Cubone's hand.
11
8
ASSEMBLY
Now we will start adding the details to Cubone's face. We will start by giving the skull sides some
ridges.
1. Take your yarn needle and a long

2
piece of Linen yarn. Look at the
underside of the ridge and run your
yarn through one of the stitches close
to where the Skull Side meets the
Skull. Tie a knot to anchor your yarn
and then run the loose end through
1 2
skull to hide it.
2. With your yarn needle, weave the yarn
through the stitches of the Skull Side
along the side and up to the top of the
Skull piece.
3. Pull the yarn tight to form the first
ridge.
4. Now take your yarn needle and push it
through the Skull Side back through to
the bottom more towards the front.
3 4
5. Now repeat steps 1 - 3 to make the
second ridge.
Repeat these steps for the other side.

3
5
1
9
FACE
1. Sew the Skull Eyes to the sides of the

2
skull.
2. Now we are going to make the inner

parts of the eyes sink back into the skull
a bit. To do this, take a long piece of
Honey yarn and anchor it to one of the
eyes. Push the eyes together and run your
yarn needle through to the other eye and
pull tightly. Run the yarn though a few
times and pull tight. Doing this will keep 2
the eyes from bulging out too much.
3. To make the skull cracks, use your yarn 3

needle and a long piece of black yarn or
black embroidery floss and embroider the
cracks down the the sides of the skull side
piece, close to where you made the
ridges.
3
3
3
4. Apply the eyes and nostrils to the head
by gluing or needle felting.
5
1
Finished! 4
10
Finished Pictures
Thank you!
1
3 For free amigurumi patterns visit my blog:
www.1upcrochet.com 3
11
Finished Pictures
Thank you!
1
12
CHARMANDER
AMIGURUMI
YARN COLORS PATTERN
Orange
Light Yellow ABOUT THIS PATTERN
Yellow
White
Red
Black
FELT COLORS measure approximately 8 inches tall. Size may
vary, depending on yarn type and personal
Teal yarn tension.
White
Black
OTHER MATERIALS
Example:
Fiber-fil stuffing Round 4) [2 sc, inc] rep 6 times (24)
Hot glue -or- felting
needle
Black embroidery floss
TOOLS NEEDED
G hook (4.0mm) You may not alter, copy, sell, or redistribute
Scissors this pattern in whole or in part.
Yarn Needle
Felting Needle
Slicker Brush

*Note: I use a felting needle to apply felt
to my amigurumi. This is an optional
the original designer of the pattern. It's always
a good idea to give credit where credit is due.
1
BODY PARTS
Head
Use Orange.
Round 1) 6 sc in Magic Ring (6) Abbreviations
Round 2) inc around (12) sc = single crochet
Round 3) [1 sc, inc] rep 6 times (18) inc = increase (2 sc in the next sc)
Round 4) [2 sc, inc] rep 6 times (24) hdc= half double crochet
Round 5) [3 sc, inc] rep 6 times (30) dc = double crochet
Round 6) [4 sc, inc] rep 6 times (36) dec = invisible decrease
Round 7) [5 sc, inc] rep 6 times (42) sl st = slip stitch
Round 10) – Round 16) sc around (54) Round 20) Sc around (30)
Round 17) 3 sc in Front Loops, 6 inc, 3 sc in Round 21) [3 sc, dec] rep 6 times (24)
Front Loops, 42 sc (60) Round 22) Sc around (24)
Round 18) [2 sc, inc] rep 6 times, 42 sc (66) Round 23) Sc around (24)
Round 19) sc around (66) Finish with a slip stitch. Leave a long tail for
Round 20) sc around (66) sewing. Stuff the body and leave open.
Round 21) [2 sc, dec] rep 6 times, 42 sc (60)
Round 22) [1 sc, dec] rep 6 times, 42 sc (54)
Hips
Use Orange. Make two
sewing. Do not close off. Stuff the head.
Body
Use Orange.
Round 6) Sc around (30)
Round 7) Dec 6 times, 18 sc (24)
Finish with a slip stitch. Stuff.
Note: the side of the hip piece with the 6
consecutive dec’s in round 7 should face the
front side of the body during assembly.
Round 8) -Rnd 12) sc around (42)
2
BODY PARTS
Feet Tail
Use Orange. Make two. Use Orange.
Round 1) 6 sc in magic ring (6) Round 1) 6 sc in magic ring (6)
Round 6) 12 dec, 6 sc (28) Round 6) [2 sc, inc] rep 3 times (12)
Round 7) 6 dec, 6 sc (12) Round 7) sc around (12)
Round 8) 6 sc (12) Round 8) [3 sc, inc] rep 3 times (15)
Finish with a slip stitch. Stuff the foot. Round 9) 5 hdc, 10 sc (15)
Round 10) 5 hdc, 10 sc (15)
Round 11) 4 hdc, 2 hdc in next stitch, [4 sc,
Foot Pads
inc] rep 2 times (18)
Use Light Yellow. Make two.
Round 12) 6 hdc, 12 sc (18)
Round 13) -Round 16) 6 hdc, 12 sc (18)
Round 19) 8 sc, sl st (24)
Toes Now turn your work and begin working in
Use White. Make six. rows. Do not chain 1 before turning.
Round 1) 3 sc in magic ring (3) Round 20) sl st into 2nd st from hook, sc 7,
Round 2) 2 sc, inc (4) sl st (9)
Round 3) 3 sc, inc (5) Finish off. Leave the tail open and stuff.
sewing.
Arms
Use Orange. Make two.
Stuff the arm arms. Only lightly stuff on the
open-ended side. Fold the arm flat and sc
across the opening to close.
3
BODY PARTS
Belly
Use Light Yellow.
For this piece you will crochet in ROWS, not
rounds. a.
Chain 4.
Round 1) sc across (3)
Round 2) sc, inc, sc (4)
Round 3) sc, inc, inc, sc (6)
Round 4) inc, 4 sc, inc (8)
Round 6) inc, 6 sc, inc (10)
Round 7) – Round 13) sc across (10)
Round 14) dec, 6 sc, dec (8) Belly before sc border
Round 16) dec, 4 sc, dec (6)
Round 27) sc, sc, dec, sc, sc (5)
Round 36) sc, sc, dec, sc (4)
Round 37) -Round 39) sc across (4)
Round 40) sc, dec, sc (3)
Round 43) sc, dec (2)
Round 44) sc, sc (2)
sc around the entire piece, making a border
of single crochets. Finish with a slip stitch.
Leave a long tail for sewing.
Belly After sc border
Eyes
For Charmander's eyes you will use black and
white felt. Use your scissors to cut out the
shapes you see in the photos to the right.
For extra detail, use teal felt for
Charmander's iris color.
4
POKEBALL
Optional Pokeball
For the pokeball you will need Red, White, and Black yarn.
Start with Red. a.

Round 6) sl st around (24)
*color change to black*
Round 7) sl st around in back loops only (24)
*color change to white*
Round 8) sl st around in back loops only (24)
Round 9) sc around in back loops only (24)
Round 12) dec around (6)
Stuff the pokeball and then close off.
Button
For the pokeball's button, cut out a small
circle of black felt and a slightly smaller
circle of white felt. Glue or needle felt the
circles onto the front of the pokeball with the
white circle on top of the black.
5
ASSEMBLY
Use the provided pictures of the finished Charmander as a visual aid to help guide you in the
assembly process. I recommend using pins to help plan where you want to sew parts to the body.
1 2
1. Sew the open end of the head to 1 2
the open end of the body.
2. Sew the tail to the lower backside

of the body.
3 3
3. Sew the belly along the front and

lower sides of the body and tail. Using
pins can be very helpful during this
part.
4
4. Sew the hips to the sides of the
body. The side of the hip piece with the
6 consecutive dec’s in round 7 should
face the front side of the body.
1
3 3
6
ASSEMBLY
5
5
2
5. Sew the feet onto the front of the
hips.
6
6. Sew the foot pads onto the feet,
then sew the toes to the feet.
7
7. Sew the arms to the sides of the
body. If you plan to have Charmander
hold the optional Pokeball, be sure to
sew the arms on at a forward reaching
angle. Sew or glue the Pokeball in
between the arms.
7
1
3 3
7
ASSEMBLY
Tail Flame
To make the tail flame, take strands of red and yellow yarn and root them to the tip of
Charmanders tail. Then using a slicker brush, brush out the yarn.
First, cut several strands of

red and yellow yarn about 4
inches in length.
1. Stick your hook 2. Pull yarn strand 3. Yarn over with both 4. Pull ends of strand
through a stitch on the tail. through. ends of strand. Pull tightly to root it to the tail.
Fold yarn strand in half through.
and grab with your hook. 7
7
5. Root several 6. Brush out the
strands of red and yarn with the
yellow yarn to the slicker bush. If
yip of the tail. needed, use your
scissors to trim up
and shape the
flame.
1
3 3
8
ASSEMBLY
Eyes and Nose
Use your scissors to cut out the shapes for Charmander's eyes from the black and white felt.
Apply the eyes to the face using a felting needle or glue. For extra detail you can use teal felt for
adding color to the eyes.
For the nose use your yarn needle and some black yarn or black embroidery floss to make
Charmander's nostrils.
1
3 3
9
Finished Pictures
Thank you!
1
10
Finished Pictures
Uncinetto n 3
Lana raimbow 8 8
Colore bianco
E arancione color 66
Thank you!
1
11
MEW
AMIGURUMI
PATTERN
YARN COLORS
ABOUT THIS PATTERN
Red Heart Super Saver:
Petal Pink -or- Light While making this amigurumi you will work in
blue for shiny mew continuous rounds, unless told otherwise. Use
Black a stitch maker to mark end of your rounds.
White The finished amigurumi should
Medium Purple measure approximately 8.5 inches tall in a
sitting position. Size may vary, depending on
FELT COLORS yarn type and personal yarn tension.
White Instructions that need to be repeated will be

Blue marked with brackets followed by the number
Light Blue of times it needs to be repeated.
Pink Example:
OTHER MATERIALS Round 4) [2 sc, inc] rep 6 times (24)
Fiber-fil stuffing
18 gauge stem wire (20
inches) IMPORTANT INFORMATION
Hot glue
TOOLS NEEDED You may not alter, copy, sell, or redistribute
this pattern in whole or in part.
G hook (4.0mm)
Scissors This pattern is intended for personal use only.
Yarn Needle
Felting Needle
If you use publish photos of items made from
this pattern I ask that you please give me
*Note: I use a felting needle to apply felt credit as the original designer of the pattern.
to my amigurumi. This is an optional It's always a good idea to give credit where
technique. If you do not have a felting credit is due.
1
BODY PARTS
Head
Use Petal Pink.
Round 1) 6 sc in Magic Ring (6) Abbreviations
sc = single crochet
dc = double crochet
sl st = slip stitch
rep = repeat
Round 15) 3 inc, 5 sc, {in Front Loops: 3 Round 14) [6 sc, dec] rep 6 times (42)
sc, 6 inc, 3 sc}, 5 sc, 3 inc, 26 sc (66) Round 15) sc around (42)
Round 16) 11 sc, [2 sc, inc] rep 6 times, Round 16) sc around (42)
37 sc (72) Round 17) [2 sc, dec] rep 6 times, 18 sc (36)
Round 19) 11 sc, [2 sc, dec] rep 6 times, Round 20) sc around (36)
37 sc (66) Round 21) [1 sc, dec] rep 6 times, 18 sc (30)
Round 20) 11 sc, [1 sc, dec] rep 6 times, Round 22) sc around (30)
37 sc (60) Round 23) sc around (30)
Round 21) [8 sc, dec] rep 6 times (54) Round 24) sc around (30)
Round 22) [7 sc, dec] rep 6 times (48) Round 25) [3 sc, dec] rep 6 times (24)
Round 25) [3 sc, dec] rep 6 times (24) Finish with a slip stitch and leave a long tail for
Finish with a slip stitch and leave a long sewing. Stuff the body.
tail for sewing. Do not close off. Stuff the
head. Hips
Use Petal Pink. Make two.
Body
Round 1) 6 sc in Magic Ring (6)
Use Petal Pink.
Round 3) 1 sc, inc; rep 6 times (18)
Round 7) dec 6 times, 18 sc (24)
sewing. Do not close off. Stuff.
2
BODY PARTS
Foot Tail
Use Petal Pink. Stuff as you go. Make two. Use Petal Pink.
Round 1) 6 sc in Magic Ring (6) Round 1) 6 sc in Magic Ring (6)
Round 7) [2 sc, dec] (12) Round 7) [3 sc, dec] rep 3 times (12)
Round 9) -Round 18) sc around (12) Round 9) sc around (12)
Round 19) dec around (6) Round 10) [2 sc, dec] rep 3 times (9)
Finish stuffing the foot, then close off. Round 11) sc around (9)
Stuff the end of the tail, then continue to the
next round.
Arms
Round 1) sc 6 in Magic Ring (6)
Round 16) 4 sc, dec (5)
Take your stem wire and bend the end
Stuff the arm. Only lightly stuff towards the
around so that the end is blunt. This will
opening. Fold the opening flat and then sc
prevent it from poking through the tail. Insert
across the opening to close the arm. Leave a
it into the tail and run it all the way up to
long tail for sewing.
the end of the tail. You should still have a
few inches of extra wire sticking out of the
open end. This will be inserted into the body
during assembly.
Ears
Finish with a slip stitch and leave a long tail
for sewing. Stuff the ear.
3
POKEBALL
Eyes
Optional Pokeball (Master Ball)
Cut two soft triangle shaped eyes from the
To make the Pokeball you will need Medium
white felt and two small ovals from the
Purple, Black, and White yarn.
white felt. Cut two smaller triangle shapes
Start with Medium Purple.
from the blue felt. Trim them to fit the face.
Tip: looking at reference photos of mew can
really help with getting the shape and size of
the eyes correct.
Round 6) sl st around (24)
*color change to black*
Round 7) sl st around in back loops only
(24)
*color change to white*
Round 8) sl st around in back loops only
(24)
Round 9) sc around in back loops only (24)
Round 12) dec around (6)
Stuff the pokeball and then close off.
For the Master Ball's button, cut out a small

circle of black felt and a slightly smaller
circle of white felt. Glue or needle felt the
circles onto the front of the ball with the
white circle on top of the black.
Cut two small circles of pink felt and apply
them to the top of the ball as seen in the
photos. Foot Pads
Cut a small letter “M” out of white felt and Cut two small circles of pink felt and apply
apply it to the ball above the button. them to the mid front of the feet.
4
ASSEMBLY
Use the provided pictures of the finished Mew as a visual aid to help guide you in the assembly
process. I recommend using pins to help plan where you want to sew parts to the body. They are
especially helpful in getting the tail and hip/feet placements adjusted so that Mew can balance
upright on its own.
1. Sew the open end of the head onto the

open end of the body.
3. Sew the hips onto the sides of the body.

Note that the sides of the hips with the 6
consecutive dec's will face towards the front of
the body
10
1
3
4. Sew or glue the feet to the front of the hips.
3
5
ASSEMBLY
5. Sew the arms to the body.

If you want to use the optional Masterball,
be sure to sew the arms at a forward
reaching angle. Then sew or glue the
pokeball between the arms.
6. Insert the wire into the lower backside

of the body and sew the tail to the body.
Then bend the tail as desired.
7. Apply the eyes to the face and the foot

pads to the feet. You can use glue or a
felting needle.
Tip: to give the eyes a little more detail,
use a lighter blue highlight in the lower
parts of mew's eyes.
1
3
Finished!
6
Finished Pictures
Thank you!
1
3 www.1upcrochet.com 3
7
Finished Pictures
hiny!
ke it s
Ma
Thank you!
1
3 www.1upcrochet.com 3

Chibi Espeon Amigurumi Pattern

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Chibi Espeon Amigurumi Pattern

Uploaded by

Copyright:

Available Formats

CHIBI ESPEON

Fiber-fil stuffing Example:

This pattern is intended for personal use only.

If you publish photos of items made from this

Join the Legs with the Body

3 1- Second leg still on

What the Front Legs and Body look like

Tie off and weave in the loose ends of the

*Note: When counting rows to check which row you are

Round 17) sc around legs and body (30)

Back Foot Eyes Lobes

Finish with a slip stitch and finish stuffing the

Eyes & Nose Inner Ear

Use the image below as a reference.

2. Sew the ears to the head.

4. Sew the back feet to the front of the thighs.

5. Sew the tail to the lower backside of the body.

6. Sew the ear lobes to the ears.

1UpCrochet 1UpCrochet 1UpCrochet 1UpCrochet 1UpCrochet 1UpAshe

This pattern is intended for personal use only.

If you publish photos of items made from this

Front Leg Now the legs are one piece.

3 1- Second leg still on

What the Front Legs and Body look like

yarn you just used to sew the body and legs

Round 17) sc around legs and body (30)

*Another note: When counting rows to check

Eyes & Nose

1. Sew the head to the body.

2. Sew the ears to the head.

3. Sew the thighs to the sides of the

4. Sew the back feet to the front of

5. Sew the tail to the lower

6. Sew the body rings to the sides

7.Sew forehead ring to the forehead.

1UpCrochet 1UpCrochet 1UpCrochet 1UpCrochet 1UpCrochet 1UpAshe

If you publish photos of items made from this

Skull Eyes Belly

Back Spike - Large Bone Club

Bone Club (continued) Eyes and Nostrils

Finished Bone Club

First we must assemble the Head/Skull.

1.Sew the Skull Side pieces to the sides

2. Sew the Skull Teeth onto the Skull.

3. Sew the Horns to the Skull.

5. Sew the tail to the back of the body.

6. Sew the head onto the open end of

7. Sew the hips onto the lower sides of

9. Sew the arms to the sides of the body,

10. Sew the back spikes to the back of

7. Sew or glue the Bone Club to

1. Take your yarn needle and a long

Repeat these steps for the other side.

1. Sew the Skull Eyes to the sides of the

2. Now we are going to make the inner

3. To make the skull cracks, use your yarn 3

If you publish photos of items made from this

Start with Red. a.

2. Sew the tail to the lower backside

3. Sew the belly along the front and

First, cut several strands of

White Instructions that need to be repeated will be