Bulbasaur Amigurumi Pattern

BULBASAUR
AMIGURUMI
PATTERN
YARN COLORS
Red Heart Super Saver: ABOUT THIS PATTERN

Minty
While making this amigurumi you will work in
Spring Green
continuous rounds, unless told otherwise. Use
Real Teal
a stitch maker to mark end of your rounds.
Hunter Green
Black The finished amigurumi should
White measure approximately 6.5 inches tall in a
Red sitting position. Size may vary, depending on
yarn type and personal yarn tension.
FELT COLORS
Instructions that need to be repeated will be
White marked with brackets followed by the number
Red of times it needs to be repeated.
Black
Example:
Optional: Teal
Round 4) [2 sc, inc] rep 6 times (24)
OTHER MATERIALS
Fiber-fil stuffing
18 gauge stem wire (19
IMPORTANT INFORMATION
inches)
Black Embroidery Floss You may not claim this pattern as your own.
Hot glue You may not alter, copy, sell, or redistribute
TOOLS NEEDED
this pattern in whole or in part.
G hook (4.0mm) This pattern is intended for personal use only.
Scissors
Yarn Needle
If you use publish photos of items made from
Felting Needle
this pattern I ask that you please give me
*Note: I use a felting needle to apply felt credit as the original designer of the pattern.
to my amigurumi. This is an optional It's always a good idea to give credit where
technique. If you do not have a felting credit is due.
needle you can use glue instead.
1
BODY PARTS
Head
Use Minty
Round 1) 6 SC in Magic Ring (6) Abbreviations
Round 2) INC around (12)
sc = single crochet
inc = increase (2 sc in the next sc)
hdc= half double crochet
dc = double crochet
dec = invisible decrease
Round 7) [5 sc, inc] repeat around (42)
sl st = slip stitch
rep = repeat
Round 10) – Round 14) SC around (54)
Round 15) 3 inc, in Front Loops (8 sc, 6 Round 5) [5 sc, inc] repeat around (42)
inc, 8 sc), 3 inc, 26 sc (66) Round 6) sc around (42)
Round 16) [10 sc, inc] rep 6 times (72) Round 7) [6 sc, inc] rep 6 times (48)
Round 17) sc around (72) Round 8) sc around (48)
Round 18) 6 sc, [3 sc, dec] rep 6 times, 36 Round 9) [6 sc, dec] rep 6 times (42)
sc (66) Round 10) sc around (42)
Round 19) [9 sc, dec] rep 6 times (60) Round 11) sc around (42)
Round 20) [3 sc, dec] rep 12 times (48) Round 12) [5 sc, dec] rep 6 times (36)
Round 25) [1 sc, dec] rep 6 times (12) Round 17) SC around (30)
Round 26) dec 6 times (6) Round 18) SC around (30)
Finish off. Stuff the head before closing. Round 19) sc around (30)
Shaping the head while stuffing is very Finish with a slip stitch. Leave a long tail for
important so that the head doesn’t sewing. Do not close. Stuff the body.
become to spherical. Make sure to
adequately stuff the snout to help it Ears
slightly project forward. Use Minty.
Round 1) 6 sc in Magic Ring (6)
Body Round 2) [1 sc, inc] rep 3 times (9)
Use Minty. Round 3) [2 sc, inc] rep 3 times (12)
Chain 8. We are going to crochet around the Round 4) [3 sc, inc] rep 3 times (15)
chain. Round 5) [4 sc, inc] rep 3 times (18)
Round 1) 6 sc, 3 sc in the next stitch, 6 sc, Round 6) [5 sc, inc] rep 3 times (21)
3 sc in the next stitch (18) Finish off. Do not close. Stuff the ear.
2
BODY PARTS
Back Foot Hip

Use Minty. Make two. Use Minty. Make two.
Round 1) 8 sc in Magic Ring (8) Round 1) 6 sc in magic ring (6)
Round 2) inc around (16) Round 2) Inc around (12)
Round 3) sc around in Back Loops (16) Round 3) [1 sc, inc] rep 6 times (18)
Round 4) sc around (16) Round 4) [2 sc, inc] rep 6 times (24)
*Now we are going to crochet in rows to Round 5) [3 sc, inc] rep 6 times (30)
increase the height of one side. Turn your Round 6) Sc around (30)
work. Do not chain at the end of each row. Round 7) Dec 6 times, 18 sc (24)
Row 5) 10 sc, turn Round 8) Sc around (24)
Row 6) 9 sc, turn
Row 7) 8 sc, turn
Vines
Row 8) 7 sc, turn
Use Hunter Green. Make two.
Finish off. Stuff the foot.
Round 1) 4 sc in magic ring (4)
Round 5) sc around (10)
Round 6) [3 sc, dec] rep 2 times (8)
-At this point stuff the end of the vine-
Round 9) 4 sc, dec (5)
Round 11) -Round 28) sc around (5)
What the foot should And from the front. The Finish off. Do not close off.
look like from the side... front feet will look
similar.
Bulb
Front Foot Use Spring Green.
Use Minty. Make two. Chain 30, then join the ends of the chain
Round 1) 8 sc in Magic Ring (8) together with a slip stitch to make a ring.
Round 2) inc around (16) Now we will begin to crochet in the round
Round 3) sc around in Back Loops (16) along the ring.
*Now we are going to crochet in rows to Round 2) [5 sc, inc] rep 6 times (42)
increase the height of one side. Turn your Round 3) [6 sc, inc] rep 6 times (48)
work. Do not chain at the end of each row. Round 4) [7 sc, inc] rep 6 times (54)
Row 6) 10 sc, turn Round 5) sc around (54)
Row 7) 9 sc, turn Round 6) sc around (54)
Row 8) 8 sc, turn Round 7) [7 sc, dec] rep 6 times (48)
Row 9) 7 sc, turn
Finish off. Stuff the foot.
3
BODY PARTS
Bulb continued... Pokeball

To make the Pokeball you will need Red,
Round 8) sc around (48) Black, and White yarn.
Round 9) [6 sc, dec] rep 6 times (42) Start with Red.
Round 10) sc around (42) Round 1) 6 sc in magic ring (6)
Round 11) [5 sc, dec] rep 6 times (36) Round 2) inc around (12)
Round 12) [1 sc, dec] rep 12 times (24) Round 3) [1 sc, inc] rep 6 times (18)
Round 13) [2 sc, dec] rep 6 times (18) Round 4) [2 sc, inc] rep 6 times (24)
Round 15) [1 sc, dec] rep 6 times (12) Round 6) sl st around (24)
Round 16) sc around (12) *color change to black*
Round 17) dec 6 times (6) Round 7) sl st around in back loops only
Close off. Lightly stuff the bulb. (24)
*color change to white*
Body Spots Round 8) sl st around in back loops only
The body spots can either be felted on from (24)
teal felt, or they can be crocheted. Here is the Round 9) sc around in back loops only (24)
pattern for the crocheted spots. Round 10) [2 sc, dec] rep 6 times (18)
The spots are crocheted in ROWS. At the end Round 11) [1 sc, dec] rep 6 times (12)
of each row, chain 1 before turning your Round 12) dec around (6)
work. Stuff the pokeball and then close off.
The spots come in three sizes. They are all
made from the color Real Teal. For the ball's button, cut out a small circle of
black felt and a slightly smaller circle of
Small Spot white felt. Glue or needle felt the circles onto
Chain 2 the front of the ball with the white circle on
Row 1) 1 sc (1) top of the black.
Row 2) inc (2)
Finish off. Leave a long tail for sewing.
Medium Spot
Chain 2
Row 1) 1 sc (1)
Row 2) inc (2)
Row 3) sc, inc (3)
Large Spot
Chain 2.
Row 1) 1 sc (1)
Row 2) inc (2)
Row 3) sc, inc (3)
Row 4) inc, sc, inc (5)
Finish off.
4
BODY PARTS
Eyes
The eyes are made from red and white felt. Use your scissors to cut out the shapes seen in the
picture below. Trim them to fit the face.
Body Spots
The body spots can either be felted on from teal felt, or they can be crocheted and sewn on. Below
are some reference pictures of crocheted spots and spot placement on the body.
Large
Medium
Small
Toes
Cut out six tiny triangle shapes from the white felt.
Tip: Looking at reference photos of Bulbasaur can be very helpful to help determine the best size
and spot placement on the body. Its also very helpful in getting the eye shapes to look correct.
5
Bulb Shaping
Before we begin assembly we must give Bulbasaur's bulb its ridges. To do this we are going to
use a long piece of yarn and weave it through the bulb to divide it into six sections. You will need
your yarn needle to do this.
Take a look at the top of the bulb. We are going to divide the bulb into
Notice were the the increases lie. six sections, weaving yarn in
between the areas of increases.
1. 1. 2.
1. Take a long piece of spring green yarn and weave it

through the side of the bulb from the bottom to the
top.
2. Pull the yarn tight, it will pull in the the side of the
bulb. Repeat five more times.
3. Top down view of what the bulb should look like
when finished.
3.
6
ASSEMBLY
Use the provided pictures of the finished Bulbasaur as a visual aid to help guide you in the assembly
process. I recommend using pins to help plan where you want to sew parts to the body.
1. Sew the open end body to the bottom

of the head.
2. Sew the ears to the head.
3. Sew the hips onto the sides of the

body. Note that the sides of the hips with the
6 consecutive dec's will face towards the
front of the body
10
1
3
4. Sew the back feet to the front of the hips.
3
7
ASSEMBLY
5. Sew the front feet to the body.
6. Sew the bulb onto the back.
7. Take your stem wire and push it

through the base of the bulb and out the
other side. Then bend both ends of the wire
to round them off.
8. Pull the vines over the wire and sew

them to the body, just under the bulb.
1
Before attaching the Pokeball to the vines 3
apply the body spots and the eyes. Use
black embroidery floss to make the nostrils.
Finished!
8
Finished Pictures
Thank you!
For more patterns, check out my Etsy Shop "1Up Crochet"
1
For free amigurumi patterns visit my blog:
3 www.1upcrochet.com 3
1UpCrochet 1UpCrochet 1UpCrochet 1UpCrochet 1UpCrochet 1UpAshe
9
Finished Pictures
Thank you!
1
10
BULBASAUR
AMIGURUMI
PATTERN
YARN COLORS
ABOUT THIS PATTERN
Red Heart Super Saver: While making this amigurumi you will work in
Minty continuous rounds, unless told otherwise. Use
Spring Green a stitch maker to mark end of your rounds.
Real Teal
The finished amigurumi should
measure approximately 5.5 inches tall and 7
inches long. Size may vary, depending on yarn
FELT COLORS type and personal yarn tension.
White Instructions that need to be repeated will be

Red marked with brackets followed by the number
Black of times it needs to be repeated.
Optional: Teal Example:
OTHER MATERIALS
Fiber-fil stuffing
Black Embroidery Floss IMPORTANT INFORMATION
Hot glue
You may not claim this pattern as your own.
You may not alter, copy, sell, or redistribute
TOOLS NEEDED
G hook (4.0mm) This pattern is intended for personal use only.
Scissors
Yarn Needle
Felting Needle
1
BODY PARTS
Head
Use Minty
Round 1) 6 SC in Magic Ring (6) Abbreviations
Round 2) INC around (12)
sc = single crochet
dc = double crochet
sl st = slip stitch
rep = repeat
Round 10) – Round 14) SC around (54)
Round 15) 3 inc, in Front Loops (8 sc, 6
inc, 8 sc), 3 inc, 26 sc (66)
Round 18) 6 sc, [3 sc, dec] rep 6 times, 36
Round 8) – Round 12) sc around (48)
sc (66)
Round 13) 6 dec, 36 sc (42)
Round 21) [6 sc, dec] rep 6 times (42) Finish with a slip stitch. Leave a long tail for
Round 22) [5 sc, dec] rep 6 times (36) sewing. Do not close. Stuff the body.
Round 23) [1 sc, dec] rep 12 times (24) *Note that the side of the body with the 6
Round 24) [2 sc, dec] rep 6 times (18) consecutive decreases at Round 13 is the
Round 25) [1 sc, dec] rep 6 times (12) topside of the body. Be sure to shape the body
Round 26) dec 6 times (6) as you stuff that that it is not overly spherical.
Finish off. Stuff the head before closing.
Shaping the head while stuffing is very
important so that the head doesn’t Ears
become to spherical. Make sure to Use Minty.
adequately stuff the snout to help it Round 1) 6 sc in Magic Ring (6)
slightly project forward. Round 2) [1 sc, inc] rep 3 times (9)
Body Round 4) [3 sc, inc] rep 3 times (15)
Use Minty. Round 5) [4 sc, inc] rep 3 times (18)
Chain 11. We are going to crochet around Round 6) [5 sc, inc] rep 3 times (21)
the chain. Finish with a slip stitch. Leave a long tail for
Round 1) Down the side of the chain: 9 sc, 3 sewing. Do not close. Stuff the ear.
sc in the next st, Up the other side of the
chain: 9 sc, 3 sc in the next st (24)
Round 2) 9 sc, 3 inc, 9 sc, 3 inc (30)
2
BODY PARTS
Front Foot Thigh

Use Minty. Make two. Use Minty. Make two.
Round 1) 6 sc in magic ring (6) Round 1) 6 sc in magic ring (6)
Round 2) inc around (12) Round 2) inc around (12)
Round 4) sc around in Back Loops Only (18) Round 4) [2 sc, inc] rep 6 times (24)
Round 5) -Round 9) sc around Round 5) [3 sc, inc] rep 6 times (30)
We are now going to start working in rows to Round 6) sc around (30)
increase the height of one side. Turn your Round 7) sc around (30)
work. Do not chain 1 at the end of each row. Round 8) 6 dec, 18 sc (24)
Row 10) 11 sc, turn Finish with a slip stitch. Stuff the thigh.
Row 11) 10 sc, turn
Row 12) 9 sc, turn
Bulb
Row 13) 8 sc
Use Spring Green.
Finish off. Stuff the front foot. Leave a long
tail for sewing.
What the foot should And from the front. Round 12) sc around (48)
look like from the side... Round 13) [7 sc, inc] rep 6 times (54)
Back Foot Round 15) [8 sc, inc] rep 6 times (60)
Use Minty. Make two. Round 16) – Round 19) sc around (60)
Round 1) 6 sc in magic ring (6) Round 20) [8 sc, dec] rep 6 times (54)
Round 2) inc around (12) Round 21) [7 sc, dec] rep 6 times (48)
Round 3) [1 sc, inc] rep 6 times (18) Round 22) [6 sc, dec] rep 6 times (42)
Round 4) sc around in Back Loops Only (18) Round 23) [5 sc, dec] rep 6 times (36)
Round 5) sc around (18) Round 24) [4 sc, dec] rep 6 times (30)
Round 6) sc around (18) Finish with a slip stitch. Stuff the Bulb.
Round 7) 9 sc
Finish off with a slip stitch. Stuff the foot.
Note that in Round 7 we only crocheted half
way around the round. This is so that one
side of the foot is 1 row taller than the other
side. The taller side is meant to be the front
side of the foot.
3
BODY PARTS
Body Spots
The body spots can either be felted on from teal felt, or they can be crocheted. Here is the pattern
for the crocheted spots.The spots are crocheted in ROWS. At the end of each row, chain 1 before
turning your work.The spots come in three sizes. They are all made from the color Real Teal.
Small Spot
Chain 2
Row 1) 1 sc (1)
Row 2) inc (2)
Medium Spot
Chain 2
Large
Row 1) 1 sc (1)
Row 2) inc (2)
Row 3) sc, inc (3)
Medium
Large Spot
Chain 2.
Row 1) 1 sc (1)
Row 2) inc (2) Small
Row 3) sc, inc (3)
Row 4) inc, sc, inc (5)
Finish off.
4
BODY PARTS
Eyes
The eyes are made from red and white felt. Use your scissors to cut out the shapes seen in the
picture below. Trim them to fit the face.
Body Spots
The body spots can either be felted on from teal felt, or they can be crocheted and sewn on. Below
are some reference pictures of crocheted spots and spot placement on the body.
Large
Medium
Small
Toes
Cut out six tiny triangle shapes from the white felt.
Tip: Looking at reference photos of Bulbasaur can be very helpful to help determine the best size
and spot placement on the body. Its also very helpful in getting the eye shapes to look correct.
5
Bulb Shaping
Before we begin assembly we must give Bulbasaur's bulb its ridges. To do this we are going to
use a long piece of yarn and weave it through the bulb to divide it into six sections. You will need
your yarn needle to do this.
Take a look at the top of the bulb. We are going to divide the bulb into
Notice were the the increases lie. six sections, weaving yarn in
between the areas of increases.
1. 1. 2.
1. Take a long piece of spring green yarn and weave it

through the side of the bulb from the bottom to the
top.
2. Pull the yarn tight, it will pull in the the side of the
bulb. Repeat five more times.
3. Top down view of what the bulb should look like
when finished.
3.
6
ASSEMBLY
Use the provided pictures of the finished Bulbasaur as a visual aid to help guide you in the assembly
1. Sew the open end body to the head.
2. Sew the thighs to the body.
9
3. Sew the front legs to the body.
4. Sew the back feet to the front of the

thighs.
10
1
3 3
7
ASSEMBLY
6. Sew the bulb onto the back.
7. Apply the rest of the details. Eyes, body

spots and toes. For the nostrils use black
embroidery floss or black yarn.
Finished! 1
3
8
Finished Pictures
1
3 3
9
Finished Pictures

1
10
PUMPKIN
BULBASAUR
AMIGURUMI
YARN COLORS
Use the previous Bulbasaur pattern to make all the body parts
for Pumpkin Bulbasaur, except the bulb. Make body, head,
Grey ears, legs and feet in Grey.
Charcoal
Purple The eyes will be made in the same way as regular bulbasaur,
Orange just with white and orange felt.
Green
Pumpkin
FELT COLORS Use Orange.
White Round 2) inc around (12)
Orange Round 3) [1 sc, inc] rep 6 times (18)
Dark Grey Round 4) [2 sc, inc] rep 6 times (24)
Black Round 5) [3 sc, inc] rep 6 times (30)
Yellow Round 6) [4 sc, inc] rep 6 times (36)
OTHER MATERIALS
Fiber-fil stuffing Round 10) [6 sc, inc] rep 6 times (48)
Black Embroidery Floss Round 11) sc around (48)
Hot glue Round 12) [7 sc, inc] rep 6 times (54)
TOOLS NEEDED Round 15) -Round 20) sc around (60)
G hook (4.0mm)
Scissors
Yarn Needle
Felting Needle
*Note: I use a felting needle to apply felt Finish with a slip stitch. Leave a long tail for sewing. Stuff the
to my amigurumi. This is an optional Pumpkin.
technique. If you do not have a felting
needle you can use glue instead. Follow the bulb shaping instructions on page 6 to make the
pumpkin's ridges.
11
PUMPKIN BULBASAUR
Round 13) In Front Loops Only: [3 sc, inc] rep 6
Pumpkin Stem
times (30)
Use Green.
Round 3) sc around in Back Loops Only (9)
Finish with a slip stitch. Stuff the hat.
Cut a long narrow strip from the black felt
Finish with a slip stitch. Leave a long tail for
sheet and glue it around the base of the hat,
sewing. Stuff the stem.
just above the brim. For the buckle, cut a
small square from the yellow felt, then cut a
small square hole in the center. Glue it to the
Short Vines
front of the hat.
Use Green. Make 3.
Chain 16.
Assmebly
Row 1) sc 15 (15)
Follow the assembly instructions for regular
Finish off. Keep your tension tight as you
Bulbasaur to put all the body parts together.
crochet down the chain. Let your work curl
Use the Finished pictures as a reference.
up.
Sew the pumpkin onto the back.
Long Vines
Use Green. Make 4.
Sew the pumpkin stem to the top of the
Chain 23.
pumkpin.
Row 1) sc 22 (22)
Finish off. Keep your tension tight as you
Apply the eyes and spots to the body. The
crochet down the chain. Let your work curl
body spots are made from charcoal colored
up.
felt or can be crocheted following the body
spots pattern with charcoal colored yarn.
Witch Hat
Use Purple.
Sew the 3 Short vines around the base of the
pumpkin stem.
Round 2) inc around (6)
Sew the 4 Long Vines to the base of the
pumkin, two on each side.
Sew the hat to Bulbasaur's head.
Round 7) [3 sc, inc] 3 times (15)
1
Round 9) [4 sc, inc] 3 times (18)
Finished! 3
Round 12) Sc around (24)
12
Finished Pictures

1
13
PIKACHU
AMIGURUMI
PATTERN
ABOUT THIS PATTERN
YARN COLORS
Yellow continuous rounds, unless told otherwise. Use
Brown a stitch maker to mark end of your rounds.
Red The finished amigurumi should
Black measure approximately 9 inches tall in a
White sitting position. Size may vary, depending on
yarn type and personal yarn tension.
FELT COLORS
marked with brackets followed by the number
White of times it needs to be repeated.
Black
Example:
OTHER MATERIALS
Fiber-fil stuffing
Black embroidery Floss
Hot glue
TOOLS NEEDED You may not alter, copy, sell, or redistribute
G hook (4.0mm)
Scissors This pattern is intended for personal use only.
Yarn Needle
Felting Needle
1
BODY PARTS
Head
Use Yellow. Stuff as you go. Abbreviations
sc = single crochet (1sc in the next sc)
dc = double crochet
sl st = slip stitch
rep = repeat
Round 10)–Round 14) sc around (54)
Round 15) 3 sc in Front Loops, 6 inc in
Front Loops, 3 sc in Front Loops, 42 SC
(60)
sewing. Do not close off. Stuff.
Round 18) sc around (66) Body
Round 19) [1 sc, dec] rep 6 times, 48 SC Chain 8. We are going to crochet around the
(60) chain.
Round 20) [3 sc, dec] rep 12 times (48) Round 1) 6 sc, 3 sc in the next stitch, 6 sc, 3 sc
Round 21) [6 sc, dec] rep 6 times (42) in the next stitch (18)
Round 22) [5 sc, dec] rep 6 times (36) Round 2) [2 sc, inc] repeat around (24)
Round 23) [4 sc, dec] rep 6 times (30) Round 3) [3 sc, inc] repeat around (30)
Finish with a slip stitch. Leave a long tail Round 4) [4 sc, inc] repeat around (36)
for sewing. Do not close off. Stuff the Round 5) [5 sc, inc] repeat around (42)
head. Round 6) sc around (42)
Ears Round 8) sc around (48)
You will need Black and Yellow. Start Round 9) [6 sc, dec] rep 6 times (42)
with Black. Make Two. Round 10) sc around (42)
Round 1) 3 sc in Magic Ring (3) Round 11) sc around (42)
Round 2) inc around (6) Round 12) [5 sc, dec] rep 6 times (36)
Round 3) [1 sc, inc] rep 3 times (9) Round 13) sc around (36)
Round 5) [3 sc, inc] rep 3 times (15) Round 15) [4 sc, dec] rep 6 times (30)
Round 6) [4 sc, inc] rep 3 times (18) Round 16) SC around (30)
Color change to yellow. Round 17) SC around (30)
Round 7) sc around (18) Finish with a slip stitch. Leave a long tail for
Round 8) sc around (18) sewing. Do not close off. Stuff.
Round 9) [4 sc, dec] rep 3 times(15)
2
BODY PARTS
Hips Cheeks
Round 1) 6 sc in Magic Ring (6) Use Red. Make two.
Round 2) inc around (12) Round 1) 6 sc in Magic Ring (6)
Round 3) 1 sc, inc; repeat around (18) Round 2) [1 sc, inc] rep 6 times (12)
Round 4) 2 sc, inc; repeat around (24) Round 3) [2 sc, inc] rep 6 times (18)
Round 5) 3 sc, inc; repeat around (30) Finish with a slip stitch. Leave a long tail for
Round 6) sc around (30) sewing.
Round 7) dec 6 times, 18 sc (24)
sewing. Do not close off. Stuff. Back Stripes
Use Brown. This is crocheted in ROWS.
Short Stripe
Foot Chain 10
Use Yellow. Make Two. Row 1) hdc 9 (9)
Round 1) 6 sc in Magic Ring (6) Finish with a slip stitch. Leave a long tail for
Round 2) [1 sc, inc; rep 3 times (9) sewing.
Round 3) -Round 8) SC around (9)
Round 9) [1 sc, dec] rep3 times (6) Long Stripe
Close off. Do not stuff. Fold the piece flat. Chain 11
Leave a long tail for sewing. Row 1) hdc 10 (10)
sewing.
Arms
Use Yellow. Make Two.
Stuff the arm, then sc across the opening to
close the arm. Leave a long tail for sewing.
3
BODY PARTS
Tail
You will need Yellow and Brown for the tail.
Start with Brown.

a. b.
*Color change to yellow* image of Rnd 6 after chain 5 4 sc down the chain
Round 6) sc, chain 5, 4 sc down the chain, 8
sc (17) see images a, b, and c.
Round 9) 10 sc, place your hook into the
other side of the round and do a sc to cut the
round in half (10) see image d.
Round 10) sc around (10) c. d.
Round 11) sc around (10) see image e.
Round 12) 5 sc, ch 5, 5 sc down the chain, 5 Top down view of completed in Rnd 9, after doing 10 sc,
Rnd 6. place your hook into the other
sc (20) see image e, f, g.
Continue to crochet in the side of the round, into the 1st
Round 13) sc around (20) round around the chain. stitch of the round.
sewing. Do not stuff the tail, keep it folded
flat. see image h.
Take your yarn needle and sew along the top
of the tail to close it. Sew the other opening
e. f.
on the tail closed too.
Image of completed rounds up Round 12 after the chain 5

to round 11.
Round 12, Keep the tail

continue to flat. Use yarn
crochet down tail to sew the
the chain and two openings
in the round. closed.
g. h. What the tail should look like

4
POKEBALL
Optional Pokeball
To make the Pokeball you will need Red,
Black, and White yarn.
Start with Red.
Round 6) sl st around (24)
*color change to black*
Round 7) sl st around in back loops only
(24)
*color change to white*
Round 8) sl st around in back loops only
(24)
Round 9) sc around in back loops only (24)
Round 12) dec around (6)
Stuff the pokeball and then close off.
For the pokeball's button, cut out a small

circle of black felt and a slightly smaller
circle of white felt. Glue or needle felt the
circles onto the front of the pokeball with the
white circle on top of the black.
5
ASSEMBLY
Use the provided pictures of the finished Pikachu as a visual aid to help guide you in the assembly
process. I recommend using pins to help plan where you want to sew parts to the body. They are
especially helpful in getting the tail and hip/feet placements adjusted so that Pikachu can balance
upright on his own.
1. Sew the open end of the head onto the

open end of the body. Note: The front side of
the face is the side with the extra increases
that was made in the front loops at round 15.
I have places a black pin to mark the front and
center the head.
2. Sew the hips onto the sides on the body.
3. Sew the ears to the top of the head.

9
4. Sew the cheeks to the sides of the face.
10
1
3 3
6
ASSEMBLY
5. Sew the feet onto the front of the

hips.
6. Sew the stripes onto the back. The

shorter stripe goes above the longer stripe.
7. Sew the arms to the sides of the

body. If you use the pokeball sew the arms
at a forward reaching angle. Sew/glue the
ball in between the arms.
8. Sew/glue the tail onto the back.
9. Cut two small circles from the black

felt and two smaller circles of white from
the white felt. Cut a small triangle from the
black felt. Needle felt or glue the eyes and
nose onto the face
10. Use a long piece of black embroidery 1

3
floss or yarn to embroider the mouth.
3
7
Finished Pictures
Thank you!
1
8
CHIBI GLACEON
AMIGURUMI
PATTERN
YARN COLORS
ABOUT THIS PATTERN
Light Blue
Ice Blue
Blue
FELT COLORS measure approximately 9 inches tall. Size may
vary, depending on yarn type and personal
Blue yarn tension.
Black marked with brackets followed by the number
of times it needs to be repeated.
OTHER MATERIALS
Example:
Hot glue
TOOLS NEEDED
G hook (4.0mm)
Scissors You may not claim this pattern as your own.
Yarn Needle You may not alter, copy, sell, or redistribute
Felting Needle this pattern in whole or in part.
This pattern is intended for personal use only.
If you publish photos of items made from this

pattern I ask that you please give me credit as
*Note: I use a felting needle to apply felt the original designer of the pattern. It's always
to my amigurumi. This is an optional a good idea to give credit where credit is due.
1
BODY PARTS
Head
Use Light Blue. Abbreviations
Round 1) 6 sc in magic ring (6) sc = single crochet
Round 2) Inc around (12) inc = increase (2 sc in the next sc)
Round 3) [1 sc, inc] rep 6 times (18) hdc= half double crochet
Round 4) [2 sc, inc] rep 6 times (24) dc = double crochet
Round 5) [3 sc, inc] rep 6 times (30) tc = triple crochet
Round 6) [4 sc, inc] rep 6 times (36) dec = invisible decrease
Round 7) [5 sc, inc] rep 6 times (42) sl st = slip stitch
Round 8) [6 sc, inc] rep 6 times (48) rep = repeat
Round 11) – Round 15) sc around (54) Round 13) sc around (30)
Round 16) {in Front Loops only: 3 sc, 6 inc, Round 14) [3 sc, dec] rep 6 times (24)
3 sc}, 42 sc (60) Round 15) sc around (24)
Round 19) [1 sc, dec] rep 6 times, 48 sc Round 18) sc around (18)
(60) Finish with a slip stitch. Stuff the body. Leave a
Round 20) [3 sc, dec] rep 12 times (48) long tail for sewing.
Front Leg
Use Blue and Light Blue. Make two.
Start with Blue.
Finish with a slip stitch. Leave a long tail
for sewing. Stuff the head. When stuffing Round 1) 6 sc in magic ring (6)
pay attention to the nose and ensure the Round 2) [1 sc, inc] rep 3 times (9)
nose is adequately stuffed to prevent Round 3) sc around (9)
wrinkling. Round 4) sc around (9)
Round 5) 8 sc, inc (10)
-color change to Light Blue-
Body
Use Light Blue.
Round 2) Inc around (12)
Finish off the first leg with a slip stitch and
stuff. Do not finish off the second leg. We are
going to join the two legs together with a sc
and then continue to crochet in the round
around both legs.
2
BODY PARTS
Join the Legs with the Body
Join the legs... Now we are going to crochet the legs to the
body to make them into one piece.
First we align the legs to the front of the

1 2 body as seen below.
3 1- Second leg still on

hook
2- Insert hook through
any stitch on the first
leg.
3- Make a sc to join Next, take a long piece of Light Blue yarn and
legs together. Place thread it through your yarn needle. Use your
your stitch marker in yarn needle sew the legs and body together.
this stitch to mark the Sew through exactly 6 stitches on the body
end of the round. and 6 stitches through the legs.
Round 16) sc around both legs (24)
Do not finish off yet. Leave your stitch marker
in place.
Now the legs are one piece.

We are going to join the legs to the body.
Tie off and weave in the loose ends of the

yarn you just used to sew the body and legs
together.
This should leave you with 12 unused stitches
What the legs should look like after row 16. on the body piece and 18 unused stitches on
the front legs piece.
3
BODY PARTS
What the Front Legs and Body look like

Now we will continue to crochet in the round
around the body and legs.
Round 17) sc around legs and body (30)

Finish with a slip stitch. Finish stuffing the
united legs and body. Leave a long tail for
sewing.
*Note: If you notice some gaping in between

the front legs or on the sides of the body 45 degree View
where we joined the separate pieces
together, just take some yarn of the same
color and place a small stitch there to sew it
closed.
*Another note: When counting rows to check

which row you are on, count from the bottom
of the front legs up, not on the body.
Thigh
Use Light Blue. Make two.
Side View
Round 5) [3 sc, inc] rep 6 times (30) Back Foot
Round 6) 7 dec, 16 sc (23) Use Blue. Make two.
Finish with a slip stitch. Leave a long tail for Round 1) 6 sc in magic ring (6)
sewing. Stuff the thigh. Round 2) [1 sc, inc] rep 3 times (9)
sewing. Stuff the foot.
4
BODY PARTS
Ear Side Bangs

Use Light Blue. Make two. Use Blue and Ice Blue. Make two.
Round 1) 3 sc in magic ring (3) Start with Blue.
Round 2) inc around (6) Round 1) 3 sc in magic ring (3)
Round 3) [1 sc, inc] rep 3 times (9) Round 2) inc around (6)
Round 7) [3 sc, inc] rep 3 times (15) Round 6) sl st, sc, in the next st: (hdc, dc), in
Round 8) sc around (15) the next st: (dc, tc, dc), in the next st: (dc,
Round 9) [4 sc, inc] rep 3 times (18) hdc), sc, sl st to end of row (19)
Round 10) [5 sc, inc] rep 3 times (21) -color change to Ice Blue-
Round 11) [6 sc, inc] rep 3 times (24) Round 7) sl st around in Back Loops Only (19)
Round 12) [6 sc, dec] rep 3 times (21) Round 8) in Back Loops Only: 17 sc, dec (18)
Round 16) sc around (15) Round 12) – Round 15) sc around (12)
Round 18) sc around (12) Round 17) – Round 22) sc around (9)
Finish off with a slip stitch. Leave a long tail Do not finish off yet. Fold the piece flat to
for sewing. Do not stuff the ear. Fold the ear that the diamond shape made by the blue
flat. yarn aligns to one side. Now take a look at
the opening.
Forehead Diamonds
Finished
Use Ice Blue. Make three.
Piece
Round 8) [2 sc, dec] rep 6 times (18) We are going to crochet along the top
Round 9) sc around (18) through both sides to close this piece. After
Round 10) [4 sc, dec] rep 3 times (15) folding it flat, take a look at the opening. We
Round 11) [3 sc, dec] rep 3 times (12) want the last stitch we made to be on the
Round 12) [2 sc, dec] rep 3 times (9) side, not in the middle. So you may need to
Round 13) [1 sc, dec] rep 3 times (6) add a couple of stitches or frog a few to get
Round 14) dec around (3) it to line up.
Finish off and close up the last row. Do not
stuff. Fold the piece flat.
5
BODY PARTS
Move it to here
If your last stitch was Finish off with a slip stitch. Do not stuff the
here tail. Fold the piece flat so that the diamond
shape made by the blue yarn aligns to one
side. This will look just like the Side Bangs.
Eyes and Nose

Cut out two semi circle shapes from the blue
felt for the eyes. To make the eye highlights
cut out two small circles from the white felt.
For the nose, cut out a tiny triangle from the
black felt.
Now insert your hook through both sides and sc across

the top to close off.
Tail
Use Blue and Ice Blue. Start with Blue.
Round 2) inc around (6) Inner Ears and Back Diamond
Round 3) [1 sc, inc] rep 3 times (9) Cut out two diamond shapes from the blue
Round 4) [2 sc, inc] rep 3 times (12) felt. Trim them to size so that they will fit in
Round 5) [3 sc, inc] rep 3 times (15) the middle of the ears.
Round 6) sl st, sc, in the next st: (hdc, dc), in Cut out a 3rd diamond that is slightly wider.
the next st: (dc, tc, dc), in the next st: (dc, This will be the diamond on Glaceon's back.
hdc), sc, sl st to end of row (19)
-color change to Ice Blue-
Round 7) sl st around in Back Loops Only (19)
Round 8) in Back Loops Only: 17 sc, dec (18)
6
ASSEMBLY
Use the provided pictures of the finished Glaceon as a visual aid to help guide you in the assembly
process.
1. Sew the head to the body.

Note: it doesn't have to go on
straight. You can slightly turn the
head to the left or right to give
Glaceon a more interesting pose!
2. Sew the thighs to the lower sides

of the body. Note: the side of the
thighs with the consecutive decreases
should face the front.
3. Sew the back feet to the front of

the thighs.
4. Sew the tail to the lower backside

of the body. *Tip: if you want your
tail to be more erect and pose-able,
you can put modeling wire inside it
before sewing to the body.
7
ASSEMBLY
process.
5. For the next steps, I recommend

using pins to help with planning part
placement before sewing/gluing the pieces
in place. (I used glue for this part)
Apply the first two head diamonds. The
bottoms of the should line up
approximately with Round 10 on the
head. Then sew/glue the third diamond
on top, in between the first two.
6. Sew the side bangs to the sides of

the head, just under the head diamonds.
7. Apply the blue diamond felt pieces

to the inner ears.
8
ASSEMBLY
process.
9. Apply the eyes and nose to the

face.
10. Apply the felt diamond to the

back.
Finished!
9
Finished Pictures
10
Finished Pictures
Thank you!
www.1upcrochet.com
11
CHIBI LEAFEON
AMIGURUMI
PATTERN
YARN COLORS
ABOUT THIS PATTERN
Green
Light Green
Pale Yellow
Light Brown
FELT COLORS measure approximately 9 inches tall. Size may
Brown yarn tension.
Black marked with brackets followed by the number
OTHER MATERIALS
Example:
Hot glue
TOOLS NEEDED
G hook (4.0mm)
Scissors You may not claim this pattern as your own.
Yarn Needle You may not alter, copy, sell, or redistribute
Felting Needle this pattern in whole or in part.
This pattern is intended for personal use only.

1
BODY PARTS
Head
Use Pale Yellow. Abbreviations
Round 1) 6 sc in magic ring (6) sc = single crochet
Round 2) Inc around (12) inc = increase (2 sc in the next sc)
Round 5) [3 sc, inc] rep 6 times (30) tc = triple crochet
Round 7) [5 sc, inc] rep 6 times (42) sl st = slip stitch
Round 8) [6 sc, inc] rep 6 times (48) rep = repeat
Front Leg
Use Pale Yellow and Light Brown. Make two.
Start with Light Brown.
Finish with a slip stitch. Leave a long tail
for sewing. Stuff the head. When stuffing Round 1) 6 sc in magic ring (6)
pay attention to the nose and ensure the Round 2) [1 sc, inc] rep 3 times (9)
nose is adequately stuffed to prevent Round 3) sc around (9)
wrinkling. Round 4) sc around (9)
-color change to Pale Yellow.
Body
Use Pale Yellow.
Round 2) Inc around (12)
Finish off the first leg with a slip stitch and
stuff. Do not finish off the second leg. We are
going to join the two legs together with a sc
and then continue to crochet in the round
around both legs.
2
BODY PARTS


hook
leg.
3- Make a sc to join Next, take a long piece of Pale Yellow yarn
legs together. Place and thread it through your yarn needle. Use
your stitch marker in your yarn needle sew the legs and body
this stitch to mark the together. Sew through exactly 6 stitches on
end of the round. the body and 6 stitches through the legs.
in place.


together.
3
BODY PARTS


sewing.

closed.

Thigh
Use Pale Yellow. Make two.
Side View
Round 6) 7 dec, 16 sc (23) Use Light Brown. Make two.
4
BODY PARTS
Ear Take some green yarn and use your yarn

Use Green, Light Green, and Pale Yellow. needle to sew the hole closed along the
Make two. length of the ear.
Start with Green.
Round 8) chain 4, sc into 5th stitch from
chain, 10 sc (15)
Tail
Use Green, Light Green, and Pale Yellow.
Start with Green.
-color change to Light Green-
Round 4) [2 sc, inc] rep 3 time (12)
-color change to Pale Yellow-
Round 6) [3 sc, inc] rep 3 time (15)
Round 9) chain 5, sc into 6th stitch from
chain, 15 sc (21)
Finish off with a slip stitch. Leave a long tail
for sewing. Do not stuff the ear.
-color change to Light Green-
Take a look at the ear, you will notice a hole
in between rounds 8 and 9. This is
from where we made a chain in round 8. Fold
the ear flat so that the hole
-color change to Pale Yellow-
aligns to the side of the ear. This will make a
small notch in the ear.
sewing. Do not stuff the tail.
Take a look at the tail, you will notice a hole
in between rounds 9 and 10. This is from
5
BODY PARTS
Under-Ear Spikes
where we made a chain in round 9. Fold the
Use Pale Yellow. Make two.
tail flat so that the hole aligns to the side of
the tail . This will make a small notch in the
tail. Take some green yarn and use your yarn
needle to sew the hole closed along the
length of the tail.
sewing. Lightly stuff the spike. Pinch the end
Forehead Leaf of the spike with your fingertips to help make
This piece is crocheted in ROWS, not in the it pointy.
round. Use Green.
Chain 16. Front Leg Leaf
Row 1) sc into 2nd ch from hook, 4 hdc, 2 dc, Use Green. Make two.
2 dc in the next st, 2 dc in the next st, 3 tc in This piece is crocheted in ROWS, not in the
the next stitch, 2 dc in the next st, 2 hdc in round.
the next st, sc, sc, sl st (21) Chain 5.
Finish off and weave in loose ends. Row 1) sl st into 2nd chain from hook, sc,
hdc, hdc (4)
Chest Leaf
Use Green. This piece is crocheted in ROWS,
not in the round.
Chain 4.
Row 1) sl st, chain 4, working down the chain:
{sc, hdc, hdc}, then sl st into 1st stitch from
the base of chain. Chain 3, working down the
chain: {sc, hdc}, then sl st into 1st stitch from
the base of the chain.
Finished Forehead Leaf (Photo guide to help with Row 1 on next

page)
Head Spikes
Use Pale Yellow. Make three.
sewing. Lightly stuff the spike. Pinch the end
of the spike with your fingertips to help make
it pointy.
6
BODY PARTS
Photo guide for Chest Leaf
1- sl st into 2nd chain from 2- working down the chain: sc,

hook, chain 4 hdc, hdc
3- sl st into 1st stich from base 4- chain 3, then working down

of chain the chain: sc, hdc. sl st into 1st
stitch from base of chain.
7
ASSEMBLY
Use the provided pictures of the finished Leafeon as a visual aid to help guide you in the assembly
process.

Note: it doesn't have to go on
straight. You can slightly turn the
head to the left or right to give
Leafeon a more interesting pose!
3. Sew the thighs to the sides of the

lower body. Note: the side of the
thighs with the consecutive decreases
should face the front.
4. Sew the back feet to the front of

the thighs.
8
ASSEMBLY
process.
5. Sew the three head spikes to

the top of the head in between the
ears.
6. Sew the Under-Ear spikes to the

sides of the head, sitting just under
the ears.
7. Sew the chest leaf to the chest.

Then sew the leg leaves to the sides
of the legs, just above the color
change.
8. Sew the tail to the lower

backside of the body.
9
ASSEMBLY
process.
9. Apply the inner ear felt pieces

to the ears. Then apply the eyes and
nose to the face. You can use glue or
a felting needle.
10. Sew or glue on the forehead

leaf to Leafeon's forehead.
Finished!
10
Finished Pictures
11
Finished Pictures
Thank you!
www.1upcrochet.com
12
CHIBI SYLVEON
AMIGURUMI
PATTERN
YARN COLORS
ABOUT THIS PATTERN
Soft White
Pink
Periwinkle Blue
Light Blue
measure approximately 9 inches tall. Size may
FELT COLORS
Black yarn tension.
Blue marked with brackets followed by the number
Light Blue of times it needs to be repeated.
Example:
OTHER MATERIALS
Fiber-fil stuffing
Hot glue
TOOLS NEEDED
G hook (4.0mm)
E hook (3.5mm) or
smaller
Scissors This pattern is intended for personal use only.
Yarn Needle
Felting Needle If you publish photos of items made from this
1
BODY PARTS
Note: All body parts are made using the 4.0mm hook (G hook) execpt for the ribbons.
They will be made with the 3.5mm or smaller hook.
Head
Use Soft White.
Round 1) 6 sc in magic ring (6) Abbreviations
Round 2) Inc around (12) sc = single crochet
Round 3) [1 sc, inc] rep 6 times (18) inc = increase (2 sc in the next sc)
sl st = slip stitch
rep = repeat
Round 22) [5 sc, dec] rep 6 times (36) Front Leg
Round 23) [4 sc, dec] rep 6 times (30) Use Soft White and Pink. Make two.
Round 24) [3 sc, dec] rep 6 times (24) Start with Pink.
Finish with a slip stitch. Leave a long tail Round 1) 6 sc in magic ring (6)
for sewing. Stuff the head. When stuffing
pay attention to the nose and ensure the
nose is adequately stuffed to prevent
wrinkling.
-color change to Soft White-
Body Round 6) sc around (10)
Use Soft White. Round 7) 9 sc, inc (11)
Round 1) 6 sc in magic ring (6) Round 8) sc around (11)
Round 2) Inc around (12) Round 9) 10 sc, inc (12)
Round 4) [2 sc, inc] rep 6 times (24) Round 11) – Round 15) sc around (12)
Round 6) [4 sc, inc] rep 6 times (36) Finish off the first leg with a slip stitch and
Round 7) sc around (36) stuff. Do not finish off the second leg. We are
Round 8) sc around (36) going to join the two legs together with a sc
Round 9) sc around (36) and then continue to crochet in the round
Round 10) [4 sc, dec] rep 6 times (30) around both legs.
2
BODY PARTS


hook
leg.
3- Make a sc to join Next, take a long piece of Soft White yarn
legs together. Place and thread it through your yarn needle. Use
your stitch marker in your yarn needle sew the legs and body
this stitch to mark the together. Sew through exactly 6 stitches on
end of the round. the body and 6 stitches through the legs.
in place.


together.
3
BODY PARTS


sewing.

closed.

Thigh
Use Soft White. Make two.
Round 2) inc around (12) Side View
Round 6) 7 dec, 16 sc (23) Use Pink. Make two.
4
BODY PARTS
Head Cap Ear Lobe

Use Pink. Use Pink.
Round 1) 6 sc in magic ring (6) Round 1) 4 sc in magic ring (4)
Round 2) inc around (12) Round 2) [1 sc, inc] rep 2 times (6)
Round 3) [1 sc, inc] rep 6 times (18) Finish with a slip stitch. Leave a long tail for
Round 4) [2 sc, inc] rep 6 times (24) sewing. This piece is small enough that you
Round 5) [3 sc, inc] rep 6 times (30) shouldn’t need to stuff.
Round 7) [5 sc, inc] rep 6 times (42) Right Ear Fur
Round 8) [6 sc, inc] rep 6 times (48) Use Pink.
Round 9) [7 sc, inc] rep 6 times (54) This piece is crocheted in ROWS, not in the
Now we will begin working in ROWS. round.
Turn your work, do not chain 1 before Chain 4.
starting row 10. For Rows 11 through 15 you Row 1) sl st, chain 4, working down the chain{
will chain 1 at the end of each row. sc, hdc, hdc} then sl st into 1st stitch from the
Round 10) sl st, 8 sc (9) base of chain. Chain 3, working down the
Round 11) dec, 5 sc, dec (7) chain {sc, hdc,} then sl st into 1st stitch from
Round 12) dec, 3 sc, dec (5) the base of the chain.
Round 13) dec, 1 sc, dec (3) Photo Guide to Row 1
Round 14) dec, 1 sc (2)
Round 15) dec (1)
Ear
Use Pink.
Round 5) [3 sc, inc] rep 3 times (15) a. Chain 4, then sl st into 2nd b. working down the chain: sc,
ch from hook, then chain 4. hdc, hdc
sewing. Do not stuff. Fold the ear flat.
c. sl st into 1st stich from base d. chain 3, then working down

of chain the chain: sc, hdc.
5
BODY PARTS
Ear Fur (Continued) Round 13) [3 sc, dec] rep 3 times (12)
e. sl st into 1st stitch from base of chain. finish off.
Round 18) 3 sc, then turn your work. chain 1,
then 2 sc.
Finish off and stuff the tail.
Finished Ear Fur
Tail
Use Pink. The tail is made from two separate
pieces that we will crochet together to form a
single piece.
Tail Part A
What the finished Tail will look like.
Round 2) inc around (6) Bow Half
Round 3) [1 sc, inc] rep 3 times (9) Use White and Pink. Make four.
Round 4) [2 sc, inc] rep 3 times (12) To start this piece we are going to make a
Round 5) sc around (12) chain and then crochet around the chain to
Round 6) -Round 10) sc around (12) form a round.
Finish off with a slip stitch. Chain 7.
Round 1) down the chain: 5 sc, inc, up the
Tail Part B other side of the chain: 5 sc, inc (14)
Round 1) 3 sc in magic ring (3) Photo Guide to Row 1
Do not finish off. With Part B still on your
hook, join Part B and Part A together in the
same way you joined the front legs together.
We are going to pick up the row count from
Part A. The next round will be Round 11.
Round 11) sc around both pieces (18)

Round 12) [4 sc, dec] rep 3 times (15) a. Chain 7 b. working down the chain:
5 sc, inc
6
BODY PARTS
*Tip: When crocheting in rows we typically
will chain 1 at the end of each row before
turning our work to accomodate for the
height of the stitches in the next row. We
typically start crocheting into the 2nd stitch
from out hook. This gives us bumpy looking
edges.
So for this piece I recommend not chaining at
the end of the row. Turn your work without
chaining, and then crochet into the very first
stitch from your hook. This will give a more
solid, straight looking edge.
c. then working up the other
side: 5 sc, inc
Piece A
- color change to pink-
Finish with a slip stitch. Leave a long tail for Piece B
sewing. Do not stuff. Fold the piece in half.
Sew open end to another bow-half to form
the completed bow. Make two bows.
Notice the difference between Piece A and

Piece B.
Piece A was crocheted by chaining 1 at the
end of each row while Piece B has no
chaining at the end of the rows.
Start with Soft White

Chain 5
Row 1) sc across (4)
Short Ribbon Row 2) -Row 24) sc across (4)
You will use a 3.5mm hook (E hook) or -color change to Pink-
smaller to make the ribbons. Row 25) sc across (4)
Use Soft White, Pink, Periwinkle Blue, and Row 26) sc across (4)
Light Blue. -color change to Periwinkle Blue-
This piece is crocheted in ROWS, not in the Row 27) sc across (4)
round. Row 28) sc across (4)
Make three. -color change to Light Blue-
Row 30) – Row 34) sc across (4)
7
BODY PARTS
-color change to Periwinkle Blue-
Short Ribbon (continued) Row 57) sc across (4)
Row 35) chain 5, working down the chain{ sl Row 58) sc across (4)
st, sc, sc, hdc} then sl st into 2nd stitch from -color change to Light Blue-
base of chain. repeat. Row 59) sc across (4)
Photo Guide to Row 31 Row 60) – Row 64) sc across (4)
Row 65 ) chain 5, working down the chain{ sl
st, sc, sc, hdc} then sl st into 2nd stitch from
base of chain. repeat.
(Refer to photo guide for the previous ribbon
at Row 31)
Eyes and Nose

Cut out the eye shapes from the light blue
felt and two oval shapes from the white felt.
A. Chain 5 B. Working down the chain:
sl st, sc, sc, hdc For the nose cut out a tiny triangle from the
black felt.
C. sl st into 2nd stitch from D. Repeat steps A thru C one

base of chain. more time.
Finish off and weave in the loose tail.

Inner Ears
Cut out two long oval shapes from the blue
Long Ribbon
felt.
You will use a 3.5mm hook (E hook) or
smaller.
Use White, Pink, Periwinkle Blue, and Light
Blue.
This piece is crocheted in ROWS, not in the
round. Start with Soft White.
Chain 5
Row 2) -Row 54) sc across (4)
-color change to Pink-
8
ASSEMBLY
Use the provided pictures of the finished Sylveon as a visual aid to help guide you in the assembly
process.
2. Sew the head cap to the head.

The point of the head cap should line
up with approximately rows 11- 12
on the head.
3. Sew the ear lobes to the sides of

the ears.
4. Sew ears to the head.
9
ASSEMBLY
process.
5. Apply the blue felt inner ear

pieces to the front of the ears. Then,
sew the Ear Fur to the front of
Sylveon's right ear.
6. Sew the thighs to the lower sides

of the body. The sides on the thighs
with the consecutive decreases
decreases should be facing to the
front.
7.Sew the back feet to the front of

the thighs.
8. Sew the tail to the lower backside

of the body.
10
ASSEMBLY
process.
9. Using a dab of hot glue, apply

the white end of the Long Ribbon to
the inner side of Sylveon's Left Ear. Long Ribbon
Then apply a Short Ribbon to the
outer side of the left ear. Take the
Long Ribbon and wrap it around the
back of the right ear, then use a dab
of glue to secure the end of the
ribbon to the front of the right ear. Short Ribbon
10. Glue a Bow to the front of the

ribbons on the left ear.
11. Take the other two short ribbons

and glue them to the front of the
body, just below the head. You can
use a small dab of glue to attach the
ribbons to the sides of the body at
the pink/blue color change.
12. Glue the Bow to the front of the

ribbons on the chest.
11
ASSEMBLY
process.
13. Apply the eyes and nose to the

face.
Finished!
12
Finished Pictures
13
Finished Pictures
Thank you!
www.1upcrochet.com
14
VULPIX
AMIGURUMI
YARN COLORS
PATTERN
Red Heart Super Saver
ABOUT THIS PATTERN
Colors:
Warm Brown While making this amigurumi you will work in
Caffe Latte continuous rounds, unless told otherwise. Use
Buff a stitch maker to mark end of your rounds.
Carrot The finished amigurumi should
measure approximately 7.5 inches tall. Size
FELT COLORS may vary, depending on yarn type and
personal yarn tension.
Brown
Orange
marked with brackets followed by the number
White
Black
Example:
OTHER MATERIALS Rnd 4. [2 sc, inc] rep 6 times (24)
Fiber-fil stuffing
Hot glue -or- felting
needle IMPORTANT INFORMATION

TOOLS NEEDED
G hook (4.0mm) this pattern in whole or in part.
Scissors
Yarn Needle This pattern is intended for personal use only.
Felting Needle
*Note: I use a felting needle to apply felt
to my amigurumi. This is an optional
the original designer of the pattern. It's always
a good idea to give credit where credit is due.
1
BODY PARTS
Head
Use Warm Brown. Stuff as you go.
Round 1) 6 sc in magic ring (6) Abbreviations
Round 2) inc around (12) sc = single crochet
Round 3) sc around (12) inc = increase (2 sc in the next sc)
Round 5) sc around (18) dc = double crochet
Round 6) inc 6 times, 12 sc (24) dec = invisible decrease
Round 7) [1 sc, inc] rep 6 times, sc 12 (30) sl st = slip stitch
Round 15) [4sc, dec] rep 6 times (30)
Round 20) dec 6 times (6) Round 24) [5 sc, dec] rep 3 times (18)
Make sure the head is adequately stuffed, Round 25) sc around (18)
then close off. Turn your work. Do not chain.
Round 26) sc into 2nd sc from hook, 5 sc, sl st
(7)
Body Finish off. Leave a long tail for sewing. Stuff the
Use Warm Brown. body and leave open.
Note: The side of the body piece that has the
extra row is the front side of the body. This
extra row will help give Vulpix's head a little bit
of an upwards tilt, as if she's looking up. If you
do not want this tilt, you can leave this row out.
2
BODY PARTS
Belly
Use Buff.
For this piece you will crochet in rows, NOT in
the round. At the end of each row you will
chain 1 then turn your work.
Chain 4 Belly piece before
Row 2) sc, inc, sc (4)
Row 3) sc, sc, inc, sc (5)
Row 4) sc, sc, inc, sc, sc (6)
Row 6) – Row 19) sc across (6)
sc around the entire piece to create a border
of single crochets. Finish with a slip stitch and
leave a long tail for sewing. Belly piece after crochet
border
Front Legs
You will need Caffe Latte and Warm Brown.
Make two. Start with Caffe Latte.
Round 2) inc around (12) Ears
Round 3) sc around (12) Use Warm Brown.
Round 4) -Round 5) sc around (12) Make Two.
-color change to warm brown- Round 1) 3 sc in magic ring (3)
Round 6) sc around (12) Round 2) inc around (6)
Round 7) -Round 15) sc around (12) Round 3) [1 sc, inc] rep 3 times (9)
Now we are going to start working in rows. Round 4) [2 sc, inc] rep 3 times (12)
Turn your work, do not chain 1. Round 5) [3 sc, inc] rep 3 times (15)
Round 16) sc into 2nd sc from hook, 6 sc (7) Round 6) [4 sc, inc] rep 3 times (18)
Finish off. Stuff the leg and leave a long tail Round 9) [7 sc, inc] rep 3 times (27)
for sewing. Do not close off, leave the leg Round 10) sc around (27)
open. Finish with a slip stitch. Leave a long tail for
sewing. Do not stuff, fold the ear flat.
3
BODY PARTS
Back Feet
You will need Caffe Latte and Warm Brown.
Make two. Start with Caffe Latte
Round 4) -Round 5) sc around (12) Hair Rolls continued...
-color change to warm brown-
Round 6) Sc around (12) Roll up the tube with the stuffed end in the
Round 7) -Round 9) sc around (12) a.
center of the roll. Use the tail to sew the end
Stuff the front half of the foot then fold the of the roll onto the side. (image b)
end flat. Sc across the opening to close.
To keep the center of the roll from slipping
out of the side, take your yarn needle and
Hips
what is left of the tail and run it through the
Use Warm Brown. Make two.
roll a few times. (image c.)

Sew the rolls together at the bottom and
Round 3) 1 sc, inc; rep 6 times (18)
pull your stitches tight. (image d.)
Round 6) SC around (30)
Round 7) 6 dec, sc to end (24)
a.
Finish with slip stitch. Do not close. Leave b.
open and stuff.
Hair Rolls
Use Carrot. Make three.
Round 1) 6 sc in magic ring
Finish with a slip stitch. Only stuff the
end of the tube, then fold the rest flat.
c. d.
(image a.)

4
BODY PARTS
Bangs
The pieces for the bangs are crocheted in
ROWS, not in the round.
Piece A
Use Carrot. Make one.
Chain 6
Row 1) sc across (5) 1
Row 3) sc, dec, sc, sc (4)
Row 4) dec, dec (2)
Row 5) sc scross (2)
Row 6) dec (1)
B B
Piece B
Use carrot. Make two.
A
Chain 4.
Row 4) dec, sc (2)
Row 5) dec (1)
Finish off. Leave a long tail for sewing. 2

Assemble the bangs as shown in the
pictures.
A
B B
5
BODY PARTS
Tails
Use Carrot. Make six.
1
Stuff as you go.

Round 5) 7 sc, 8 hdc (15)
Round 6) 7 sl st, 8 hdc (15)
Round 7) -Round 20) 7 sl st, 8 hdc (15) 2
Finish stuffing and close off. Leave a long tail
for sewing. 3
Now the end of your tail is curved and may
be curved out to the side. To fix this, and to
give the tail its desired shape, you will need
to take a long piece of carrot yarn and attach
it to the end of the tail, as seen in picture 1.
Using your yarn needle, begin running
stitches along the interior of the tail's curve
and pull them tight. This will pull the end of
the tail into a closed spiral. See the images
to the right.
4
6
BODY PARTS
Assemble the Tails.
Once you have all six tails made, you will need to sew them together. See the images below.
Eyes, Nose, Inner ears.

These pieces are all made from felt.
For the eyes, cut out two almond shaped eyes from the brown felt. With the white felt, cut out
two small circles for the eye highlights. (Looking at reference photos of Vulpix really helps in
getting the eye shapes and size correct.) Optional: To give the eye a little more detail, as
shown in the finished photos, you can use a small piece of orange, or a lighter brown, to give
the eye an iris.
For the nose, cut out a very small triangle shape from the black felt.
For the Inner ears cut out two triangles from the brown felt and trim them up so that they fit
inside the inner ears.
1
example of the cut out eye and nose shapes from the felt
3 3
7
ASSEMBLY
Use the provided pictures of the finished Vulpix as a visual aid to help guide you in the assembly
1 2
1 2
1. Sew the head onto the open end of the

body. Remember that the side of the
body with the extra row is the front side.
2. Sew the belly to the front of the body. 33 4

4
3. Sew the hips to the sides of the body.
4.Sew the flat side of the back feet to the

underside of the hips.
5. Sew the front legs to the body.
5 6
6 7
1
3 3
8
ASSEMBLY
7. Use a felting needle, or glue, and

apply the eyes, inner ears and nose to the
face/head.
8. Sew the assembled bangs onto the

8
head.
9. Sew, or glue, the hair rolls onto the

1 2
top of the head. (For my Vulpix, I ended
up using hot glue. The stitches at the
bottom of the rolls were pulled so tightly
it was hard to push the yarn needle
through. You can use whichever method
works best for you!
10. Sew the tails Vulpix's rear! Definitely

take your time with this step, making sure
you place stitches all around where the
3
9
4
tails meet the body for maximum
support.
10
6 7
Finished! 3
1
3
9
Finished Pictures
Thank you!
1
3 For free amigurumi patterns visit my blog:
www.1upcrochet.com 3
10
Finished Pictures
Thank you!
1
3 For free amigurumi patterns visit my blog:
www.1upcrochet.com 3
11

Bulbasaur Amigurumi Pattern

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Bulbasaur Amigurumi Pattern

Uploaded by

Copyright:

Available Formats

BULBASAUR

Red Heart Super Saver: ABOUT THIS PATTERN

Back Foot Hip

Bulb continued... Pokeball

1. Take a long piece of spring green yarn and weave it

1. Sew the open end body to the bottom

2. Sew the ears to the head.

3. Sew the hips onto the sides of the

5. Sew the front feet to the body.

6. Sew the bulb onto the back.

7. Take your stem wire and push it

8. Pull the vines over the wire and sew

White Instructions that need to be repeated will be

Front Foot Thigh

1. Take a long piece of spring green yarn and weave it

1. Sew the open end body to the head.

2. Sew the thighs to the body.

4. Sew the back feet to the front of the

5. Sew the ears to the head.

6. Sew the bulb onto the back.

7. Apply the rest of the details. Eyes, body

For more patterns, check out my Etsy Shop "1Up Crochet"

For more patterns, check out my Etsy Shop "1Up Crochet"

Round 1) 6 sc in Magic Ring (6)

Image of completed rounds up Round 12 after the chain 5

Round 12, Keep the tail

g. h. What the tail should look like

For the pokeball's button, cut out a small

1. Sew the open end of the head onto the

2. Sew the hips onto the sides on the body.

3. Sew the ears to the top of the head.

4. Sew the cheeks to the sides of the face.

5. Sew the feet onto the front of the

6. Sew the stripes onto the back. The

7. Sew the arms to the sides of the

8. Sew/glue the tail onto the back.

9. Cut two small circles from the black

10. Use a long piece of black embroidery 1

This pattern is intended for personal use only.

If you publish photos of items made from this

First we align the legs to the front of the

3 1- Second leg still on

Now the legs are one piece.

Tie off and weave in the loose ends of the

What the Front Legs and Body look like

Round 17) sc around legs and body (30)

*Note: If you notice some gaping in between

*Another note: When counting rows to check

Ear Side Bangs

Eyes and Nose

Now insert your hook through both sides and sc across

1. Sew the head to the body.

2. Sew the thighs to the lower sides

3. Sew the back feet to the front of

4. Sew the tail to the lower backside

5. For the next steps, I recommend

6. Sew the side bangs to the sides of

7. Apply the blue diamond felt pieces

8. Sew the ears to the head.

9. Apply the eyes and nose to the

10. Apply the felt diamond to the

1UpCrochet 1UpCrochet 1UpCrochet 1UpCrochet 1UpCrochet 1UpAshe