Brosur 4090-9002
Brosur 4090-9002
Features
1 - N.C. 5
2 - COM 6
®
with Simplex models 4010 and 4100U fire alarm
control panels 1 5
4090-9002
7
•
DATE CODE:
IDNet Relay IAMs allow fire alarm control panels to Relay IAM Contacts (Form “C”, SPDT)
control a remotely located Form “C” contact using IDNet 2 A @ 24 VDC, for transient
addressable communications for both data and module suppressed loads
Power-Limited Rating
power. Typical applications would be for switching local
1 A @ 24 VDC for inductive loads
power for control functions such as elevator capture, or
control of HVAC components, pressurization fans, 1/2 A @ 120 VAC, for transient
dampers, etc. Relay status is also communicated requiring Nonpower-Limited Rating
suppressed loads
only one device address.
Screw terminals for in/out wiring,
Wire Connections
18 to 14 AWG wire (0.82 to 2.08 mm2 )
Product Selection
Up to 2500 ft ( 762 m) from fire alarm
Model Description control panel
4090-9002 Relay IAM
IDNet Wiring Reference Up to 10,000 ft ( 3048 m) total wiring
distance (including T-Taps)
Optional Trim Plates
Compatible with Simplex 2081-9044
Model Description Overvoltage Protectors
Trim plate with LED For semi-flush
4090-9801 4-1/8” H x 4-1/8” W x 1-3/8” D
viewing window, includes mounted box Dimensions
mounting screws; painted (105 mm x 105 mm x 35 mm)
For surface
4090-9802 beige mounted box Housing Material Black thermoplastic
Mounting Plate Material Sheet metal, galvanized
32° to 120° F (0° to 49° C),
* This product has been approved by the California State Fire Marshal (CSFM) pursuant to Temperature Range
intended for indoor operation
Section 13144.1 of the California Health and Safety Code. See CSFM Listing
7300-0026:223 for allowable values and/or conditions concerning material presented in this Humidity Range Up to 93% RH at 100° F (38° C)
document. It is subject to re-examination, revision, and possible cancellation. Accepted for
use – City of New York Department of Buildings – MEA35-93E. Additional listings may be
applicable; contact your local Simplex product supplier for the latest status. ** IDNet addressable communications are protected by U.S. Patent No. 4,796,025.
S4090-0002-5 4/02
Relay IAM Mounting Information
4-9/16" 4-5/16"
Light pipe for LED viewing
(116 mm) (109 mm)
Tyco, Simplex, the Simplex logo, and IDNet are trademarks of Tyco International AG or its affiliates in the U.S. and/or other countries.