Professional Documents
Culture Documents
Dfiniti Product Brochure 1
Dfiniti Product Brochure 1
PRODUCT BROCHURE
MALAYSIA
SINGAPORE NO 43, Jln Gemilang 3,
69 Ubi Road 1, Oxley Bizhub Taman Perindustrian Cemerlang,
#10-33 Singapore 408731 81800 Ulu Tiram, Johor
T : +65-6908 0869 | F : +65-6282 0218 T : +607-861 7808 | F : +607-861 4808
INTRODUCTION
With our key competency in Electric Process Heating System, DFINITI has evolved through
the years into other thermal solutions. With part of our logo resemble a key and our tag line
‘The Key to Thermal and Process’, we are differentiated by offering complete solution not
just on ELECTRIC HEATING, but also other type of thermal solutions and process. This
provides you with “One-Stop Shop” for all your thermal requirement.
In association with our business partner, we also offer Process Equipment which are inte-
grated with heating requirements to provide a complete solution to our clients.
OUR SERVICES
• Technical Support
• Detail Design and Engineering
• Project Management
• Documentation
• Certification to meet regulatory requirement.
• Procurement
• Fabrication and Assembly
• Inspection and Testing
• Site visits and services
• Pre-commissioning, Commissioning,
Start-up and Troubleshooting
• On-site modification and repair
• Provide common spares in stock
• Training
INDUSTRIES WE SERVE
Our products are certified with ATEX and IECEx for hazardous area application.
Area classification : Zone 1, Zone 2
Temperature class : T1 – T6
Gas Group : IIA/IIB/IIC
Ingress Protection : IP66
We provide standard and customization products and solutions. In association with busi-
ness partners, we can provide solutions for other process related equipment and Well
Head Control Panel.
The most common process heating is found in Gas Dehydration and Fuel Gas Conditioning
System. We provide customization solution to meet the process demand with duty regu-
lates by Thyristor and/or Contactor using hardwired or PLC controlled.
The Electric Heater is to heat the medium in the tank to reduce viscosity at desired tem-
perature for ease of flow or pumping out of the medium. The medium can be condensate,
bitumen, chemical or any sludge collected in the sump tank.
Beside the conventional design, the heater can be designed with withdrawable element
which allow replacement of heating element without draining the tank to offer quicker turn-
around time. This is also called online replacement.
For underground tank design where only access is from the top, L-shape heater can be
provided.
c. Vaporizer
This relates to cryogenic application where the heater will heat the very low temperature
liquid and vaporize it.
While direct heating can be more efficient and cost effective, there are instance where indi-
rect heating has its place and has cost advantages over direct heating.
Water Bath is indirect heating where it heats up the water in the tank and the hot water
transfer heat to the process pipes running through it. It is cost effective for high pressure
application where the tank and heater design at atmospheric and only the pipe cater for
high pressure process.
Hot Water Calorifier is akin to the Hot Water heater at home. It is used for hot water sup-
plies for living quarters mainly in offshore application. Our advantage of being able to
supply complete with in-built heater.
Auxiliary Steam Generator is also called Auxiliary Steam Boiler. With the term ‘auxiliary’, it
is not meant to be the main boiler. Instead, it usually provides steam for the start up of the
power plant.
DFINITI can design and supply the Auxiliary Steam Generator with Superheater to super
heat the steam over 200 deg C for propulsion application.
Air Duct Heating can be used for comfort during winter where hot air is supply through the
ducting. It can also be used for processing in food industries as dryer to keep the moisture
out.
Duct heater can be designed with finned type element for high thermal efficiency, housed
in a robust enclosure to reduce vibration and noise.
h. Braking Resistor
Unlike a heater where heat is generated for a purpose, Braking Resistor works the reverse
where excess energy is being dump through resistor as load bank.
The resistor can be water-cooled or air-cooled, arranged in single or multiple bank unit.
The resistors are designed specifically for high voltage to meet the Marine classification
requirements.
Supply Voltage : max 1500VDC
Power : up to 5000KW in a single unit
Configuration : Single or multiple units
Certification : Can be safe area or hazardous area
Hot Oil Heating provide circulating heat source, usually in a large tank where direct immer-
sion heating is not practical.
With associate, we supply complete Heating system including the burner and BMS.
Type of Heat Source : Electric or Fire (burner)
Capacity : design to meet
Control : Local Contactor control (Electric)
BMS (burner)
j. Process Internals
With the support from our business associate and base on years of design experience and
operational feedback, we can provide the following Process Internals:
ELECTRIC DEHYDRATION/DESALTING
High efficiency three-phase separators, crude oil thermal treaters, crude oil electrostatic
dehydrators and desalters etc, to meet the needs of crude oil processing requirement by
customers.
MAIN PRODUCTS
• Production/metering manifold
• High efficiency separator for
high-viscosity and condensate oil
• Crude oil thermal treater
• Three phase production separators
• Two phase production separators
• Test separator
• Crude oil electrostatic desalter
• Crude oil electrostatic dehydrators
• Slug catcher with finger type
• Slug catcher with vessel type
• Free water separator
• Crude oil stabilizer
• Condensate oil coalescer
ENQUIRY FORM
(Electric Heating)
SCOPE OF SUPPLY
Heater bundle: Shell/Vessel: Control Panel:
DESIGN INPUTS
(send us datasheet if available)
S/N DESCRIPTION VALUE
1 Heater Duty
2 Process Medium
3 Inlet/Out temperature
4 Flow Rate
5 Design/Operating Pressure
6 Design/Operating Temperature
7 Power Supply
8 Area Classification
1 Shell/Vessel
2 Heater Flange
3 Heating Element Sheath
YOUR CONTACT
Name
Company
Contact Nos.
Email
Project Name