Professional Documents
Culture Documents
A Short History of Metals
A Short History of Metals
These metals were known to the Mesopotamians, Egyptians, Greeks and the Romans. Of the seven metals, five
can be found in their native states, e.g., gold, silver, copper, iron (from meteors) and mercury. However, the
occurrence of these metals was not abundant and the first two metals to be used widely were gold and copper.
And, of course, the history of metals is closely linked to that of coins and gemstones.
Gold
Gold articles are found extensively in antiquity mainly as jewelry e.g. Bracelets, rings etc. Early gold artifacts are
rarely pure and most contain significant silver contents. This led to the ancients naming another metal - electrum,
which was an alloy of gold and silver, pale yellow and similar in color to amber. Therefore, early gold varied from
pure through electrum to white gold. The symbol for gold is Au from the latin aurum meaning shining dawn.
Stone age man learned to fashion gold into jewelry and ornaments, learning that it could be formed into sheets
and wires easily. However, its malleability, which allows it to be formed into very thin sheet (0.000005 inches),
ensures that it has no utilitarian value and early uses were only decorative. As gold is a noble metal, being virtually
noncorrosive and tarnish free, it served this purpose admirably.
Gold is widely dispersed through the earth's crust and is found in two types of deposits: lode deposits, which are
found in solid rock and are mined using conventional mining techniques, and placer deposits which are gravelly
deposits found in stream beds and are the products of eroding lode deposits. Since gold is found uncombined in
nature, early goldsmiths would collect small nuggets of gold from stream beds etc., and then weld them together
by hammering.
Thus we find the first problem in process metallurgy: The metal deposit must be identified. In the case of the first
metals color was the most important factor as it allowed the metal to be recognized in surrounding rock, stones,
gravel and dirt (gangue) and separated. Clearly, after recognition, separation is next problem followed by
concentration. These three steps are very important and the economics of these steps usually define whether it is
viable to produce the metal from a set deposit. In the early days all three steps were carried out simultaneously.
Gold is widely dispersed throughout the earths crust (0.005 ppm) at a very small level, therefore, it is very
important to find naturally occurring concentrations. The scarcity of gold and its value, due to mankinds
fascination with its color, have lead to gold being the one of the more important metals in daily life.
Copper
The use of copper in antiquity is of more significance than gold as the first tools, implements and weapons were
made from copper. From 4,000 to 6,000 BC was the Chalcolithic period which was when copper came into
common use. The symbol for copper is Cu and comes from the latin cuprum meaning from the island of Cyprus.
Initially copper was chipped into small pieces from the main mass. The small pieces were hammered and ground
in a manner similar to the techniques used for bones and stones. However, when copper was hammered it
became brittle and would easily break. The solution to this problem was to anneal the copper. This discovery was
probably made when pieces were dropped in camp fires and then hammered. By 5,000 BC copper sheet was being
made.
By 3600 BC the first copper smelted artifacts were found in the Nile valley and copper rings, bracelets, chisels
were found. By 3000 BC weapons, tools etc. were widely found. Tools and weapons of utilitarian value were now
within society, however, only kings and royalty had such tools; it would take another 500 years before they
reached the peasants.
Malachite, a green friable stone, was the source of copper in the early smelters. Originally it was thought that the
smelting of copper was by chance dropping of malachite into campfires. However, campfire temperatures are
normally in the region of 600-650 C, whereas, 700-800 C is necessary for reduction. It is more probable that early
copper smelting was discovered by ancient potters whose clay firing furnaces could reach temperatures of 1100-
1200 C. If Malachite was added to these furnaces copper nodules would easily be found. Although the first
smelted copper was found in the Nile valley, it is thought that this copper was brought to Egypt by the Gerzeans
and copper smelting was produced first in Western Asia between 4000 and 4300 BC.
Although copper can be found free in nature the most important sources are the minerals cuprite, malachite,
azurite, chalcopyrite and bornite. Copper is reddish colored, malleable, ductile and a good conductor of heat and
electricity. Approximately 90% 0f the worlds primary copper originates in sulfide ores.
Lead
Lead is not found free in nature but Galena (lead sulfide) was used as an eye paint by the ancient Egyptians.
Galena has a very metallic looking appearance and was, therefore, likely to attract the attention of early
metalworkers. The production of metallic lead from its ore is relatively easy and could have been produced by
reduction of Galena in a camp fire. The melting point of lead is 327 C, therefore, it would easily flow to the lowest
point in the fireplace and collect. At first lead was not used widely because it was too ductile and the first uses of
lead were around 3500 B.C.. Lead's use as a container and conduit was important and lead pipes bearing the
insignia of Roman emperors can still be found. Lead is highly malleable, ductile and noncorrosive making it an
excellent piping material. Its symbol is Pb from the latin plumbum.
The ability of lead to flow and collect at the bottom of the campfire is an important concept in process metallurgy
as reduction reactions to be useful must cause a phase separation between the metal and the gangue. Also, the
phase separation should also enable the metal to be cast into a desired shape once concentrated.
Silver
Although silver was found freely in nature, its occurrence was rare. Silver is the most chemically active of the
noble metals, is harder than gold but softer than copper. It ranks second in ductility and malleability to gold. It is
normally stable in pure air and water but tarnishes when exposed to ozone, hydrogen sulfide or sulfur. Due to its
softness, pure silver was used for ornaments, jewelry and as a measure of wealth. In a manner similar to gold,
native silver can easily be formed. Silver's symbol is Ag from the latin argentum.
Galena always contains a small amount of silver and it was found that if the lead was oxidized into a powdery ash
a droplet of silver was left behind. Another development in this process was the discovery that if bone ash was
added to the lead oxide, the lead oxide would be adsorbed and a large amount of material could be processed. By
2500 BC the cupellation process was the normal mode of silver manufacture.
Tin
Smelted copper was rarely pure, in fact, it is clear that by 2500 BC the Sumerians had recognized that if different
ores were blended together in the smelting process, a different type of copper, which flowed more easily, was
stronger after forming and was easy to cast, could be made. An axe head from 2500 BC revealed that it contained
11% tin and 89% copper. This was of course the discovery of @b(Bronze). However, by 2000 BC copper
implements contained very little tin as local reserves of tin had been exhausted. The Sumerians were forced to
travel to find the necessary ores. Bronze was a much more useful alloy than copper as farm implements and
Native Tin is not found in nature. The first tin artifacts date back to 2000 B.C., however, it was not until 1800 B.C.
that tin smelting became common in western Asia. Tin was reduced by charcoal and at first was thought to be a
form of lead. The Romans referred to both tin and lead as plumbum where lead was plumbum nigrum and tin was
plumbum candidum. Tin was rarely used on its own and was most commonly alloyed to copper to form bronze.
The most common form of tin ore is the oxide casserite. By 1400 BC. bronze was the predominant metal alloy.
Tin's symbol is Sn from the stannum.
Tin is highly malleable and ductile and has two allotropic forms which lead to tin initially having its own disease
(tin pest or blight) which was actually formation of alpha-tin below 13 C. As alpha-tin is a highly friable cubic
structure with a greater specific volume than beta-tin, during the phase change, which is kinetically limited,
nodules of alpha-tin become visible on the surface of beta-tin giving rise to early belief of sickness and the first
true doctors of metallurgy. Tin is highly crystalline and during deformation is subject to mechanical twinning and
an audible tin cry. Tin is also quite resistant to corrosion.
Tin is found as vein tin or stream tin. The tin ore is stannic oxide and is generally found with quartz, feldspar or
mica. The ore is a hard , heavy and inert substance and is generally found as outcroppings as softer impurities are
washed away.
Mercury
Mercury was also known to the ancients and has been found in tombs dating back to 1500 and 1600 BC. Pliny, the
Roman chronicler, outlined purification techniques by squeezing it through leather and also noted that it was
poisonous. Mercury, also known as quicksilver, is the only metal which is liquid at room temperature. Although it
can be found in its native state, it is more commonly found in such ores as calomel, livingstonite, corderite and its
sulfide cinnabar. Extraction is most simply carried out by distillation as mercury compounds decompose at
moderate temperatures and volatilize.
Mercury was widely used because of its ability to dissolve silver and gold (amalgamation) and was the basis of
many plating technologies. There is also indications that it was prized and perhaps worshipped by the Egyptians.
In 315 B.C., Dioscorides mentions recovery of quicksilver (which he called hydrargyros, liquid silver) by distillation,
stating " An iron bowl containing cinnabar is put into an earthenware container and sealed with clay. It is then set
on a fire and the soot which sticks to the cover is quicksilver". Methods changed little until the 18th century.
Mercury's symbol is Hg from hydragyrum, liquid silver.
Iron
Iron was available to the ancients in small amounts from meteors. This native iron is easily distinguishable because
it contains 6-8% nickel. There is some indication that man-made iron was available as early as 2500 B.C., however,
iron making did not become an everyday process until 1200 BC. Hematite, an oxide of iron, was widely used by the
ancients for beads and ornaments. It is also readily reduced by carbon. However, if reduced at temperatures
below 700-800 C it is not suitable for forging and must be produced at temperatures above 1100 C. Wrought iron
was the first form of iron known to man. The product of reaction was a spongy mass of iron intermixed with slag.
This was then reheated and hammered to expel the slag and then forged into the desired shape. In the early days
iron was 5 times more expensive then gold and its first uses were as ornaments.
Iron weapons revolutionized warfare and iron implements did the same for farming. Iron and steel was the
building block for civilization. Interestingly, an iron pillar dating to 400 A.D., remains standing today in Delhi, India.
Corrosion to the pillar has been minimal a skill lost to current ironworkers. Iron is rarely found in its native state
the only known sources being Greenland where the iron occurs as nodules in basalt that erupted through beds of
coal and two very rare nickel-iron alloys. Iron's symbol is Fe from the latin ferrum.
These seven metals: gold, silver, copper, lead, tin, mercury and iron, and the alloys bronze and electrum were the
starting point of metallurgy and even in this simple, historic account we find some of the basic problems of
process metallurgy. The problems are:
The ores must be reacted under a controlled temperature and gas atmosphere.
The liquid metal must be collected and cast into a desired shape.
The metal must be worked to achieve desired final properties and shape.
After the seven metals of antiquity: gold, silver, copper, mercury, tin , iron and lead, the next metal to be
th
discovered was Arsenic in the 13 century by Albertus Magnus. Arsenicus (arsenious oxide) when heated with
twice its weight of soap became metallic. By 1641 arsenious oxide was being reduced by charcoal. Arsenic is steel
gray, very brittle and crystalline; it tarnishes in air and when heated rapidly forms arsenious oxide with the odor of
garlic. Arsenic compounds are poisonous. The symbol As is taken from the latin arsenicum. Arsenic was used in
bronzing and improving the sphericity of shot. The most common mineral is Mispickel or Arsenopyrite (FeSAs)
from which arsenic sublimes upon heating.
The next metal to be isolated was antimony. Stibium or antimony sulphide was roasted in an iron pot to form
antimony. Agricola reported this technique in 1560. Antimony whose name comes from the Greek "anti plus
monos"- a metal not found alone, has as its symbol Sb from the latin stibium. It is an extremely brittle flaky metal.
Antimony and its compounds are highly toxic. Initial uses were as an alloy for lead as it increased hardness.
Stibnite is the most common ore. It was commonly roasted to form the oxide and reduced by carbon.
By 1595,bismuth was produced by reduction of the oxide with carbon , however, it was not until 1753 when
bismuth was classified as an element. Zinc was known to the Chinese in 1400; however , it was not until 1738 ,
when William Champion patented the zinc distillation process, that zinc came into common use. Before
Champion's process, zinc, which was imported from China, was known as Indian Tin or Pewter. A Chinese text
from 1637 stated the method of production was to heat a mixture of calamine (zinc oxide) and charcoal in an
earthenware pot . The zinc was recovered as an incrustation on the inside of the pot. In 1781 zinc was added to
liquid copper to make brass. This method of brass manufacture soon became dominant.
One other metal was discovered in the 1500's in Mexico by the Spaniards. This metal was platinum. Although not
100% pure, it was the first metal to be discovered and sourced from the "New World". The property which
brought this metal to the prospectors attention was its lack of reactivity with known reagents. Early use of
platinum was banned because it was used as a blank for coins which were subsequently gold coated, proving that
the early metallurgists understood not only density but also economics. Although, platinum was known to the
western world, it was not until the 1800's that platinum became widely used.
Several other metals were isolated during the 1700's. These were Cobalt, Nickel, Manganese, Molybdenum,
Tungsten, Tellurium, Beryllium , Chromium, Uranium, Zirconium and Yttrium . Only laboratory specimens were
produced and all were reduced by carbon with the exception of tungsten which became the first metal to be
reduced by hydrogen.
Gold plating of silver was very popular and in 1250 Bartholommeus Anglicus gave the following advice:
"And when a plate of gold shall be melded with a plate of silver, or joined there to, it needeth to beware namely of
three things, of powder, of winde and of moisture: for if any hereof come between gold and silver, they may not be
joined together,then one with another: and therefore it needeth to meddle these two metals together in a full
cleane place and quiet and when they be joined in this manner, the joining is inseparable, so that they may not
afterward be departed asunder,"
This advice is good today. Amalgamation processes were also popular. The gold was dissolved in mercury. The
amalgam was coated onto the piece and then heated to drive off the mercury leaving a gold coated piece. Gold
could also be removed by the reverse process (1567).
Before 1807 all metals which had been separated had been reduced by either carbon or hydrogen. The separation
of other metals needed the invention of the galvanic cell. Sir Humphrey Davy used the generating pile developed
by Volta and demonstrated that water could be decomposed into hydrogen and oxygen . Next he tried a solution
containing potash and again gained hydrogen and oxygen. Then he tried a piece of moistened potash which
produced at the negative electrode something that burned brightly. His next experiment was decisive, he placed
the potash on an insulated platinum dish which was connected to the negative pole of the battery. He then
connected the positive pole to the upper surface of the potash and produced small metallic globules. In this
manner he produced potassium and sodium.
The Swedish chemist , Berzelius, found that the metals contained in lime and baryta (barium oxide) could also be
separated in this way. He used mercury as a cathode which caused the separated metals to dissolve in the
mercury. After electrolysis the mercury was distilled away and Calcium and Barium were left behind. Later, Davy
produced Strontium by the same technique. By allowing the manufacture of sodium and potassium Davy and
Berzelius had opened the door to the reduction of many refractory materials.
In 1817 Cadmium was discovered. Stroymeyer noted that zinc carbonate had a yellowish tinge not attributable to
iron. Upon reduction he thought that the alloy contained two metals. The metals were separated by fractional
distillation. At 800 C, as cadmium's boiling point is lower than zinc, the cadmium distilled first.
In 1841 Charles Askin developed a method of separating cobalt and nickel when both metals are in solution. Using
a quantity of bleaching powder he found that if the quantity of powder was small enough only cobalt oxide was
precipitated and separated. The nickel could then be easily precipitated with lime and a source for pure cobalt and
nickel was available. Pure cobalt oxide revolutionized the pottery industry as the blues were now available.
Chromium although it had been produced by reduction with carbon was the first metal to be extensively
produced using another metal (zinc). Wohler in 1859 melted chromium chloride under a fused salt layer and
attracted the chromium with zinc. The resulting zinc chloride dissolved in the fused salt and chromium
produced.In 1828, Wohler produced beryllium by reducing beryllium chloride with potassium in a platinum
crucible.
Aluminium was first produced by Christian Oersted in 1825. However it was not until 20 years later that significant
quantities were produced. Wohler fused anhydrous aluminum chloride with potassium to set free aluminum.
Later Ste Claire Deville in 1854 put together a production process using sodium instead of potassium.
The current from Galvanic cells were also used for electroplating. This was first practiced in the 1830's when silver
was deposited on baser metals. After silver plating, copper and nickel plating was developed. In the middle of the
18th century it was found that metallic separation could be carried out by the application of galvanic electricity.
The current was passed from an anode made of an impure , crude metal into a suitable electrolyte and the pure
material plated out onto a resistant cathode. Impurities present in the crude cathode dropped to the bottom of
the vessel and formed a sludge.
From this short review of metallurgical developments it can be seen that as the early metallurgists became more
sophisticated their ability to discover and separate all the metals grew. However in all of their work it was
necessary for all the basic steps to be carried out e.g. the ore had to be identified, separated from gangue, sized,
concentrated and reduced in a manner which accomplished a phase separation.
th
Table 1: METALS DISCOVERED IN 18 CENTURY
th
Table 2: METALS DISCOVERED IN 19 CENTURY
th
Table 3: METALS DISCOVERED IN THE 20 CENTURY