Professional Documents
Culture Documents
DC20D MKII Genset Controller Upgrade Version For Diesel - Gasoline Engine - Ebay
DC20D MKII Genset Controller Upgrade Version For Diesel - Gasoline Engine - Ebay
DC20D MKII is one module used for Diesel/gasoline Engine or Generator, It's an upgraded product of DC20D.It is with the functions of Auto Star/Stop, Protection and Alarm indication. DC Power and Running
situation is indicated on the front panel.
The status of the engine and generator can be checked conveniently because these parameters of over speed, under speed, Over Frequency, Low Frequency, Over Voltage, Under Voltage, Low Oil Pressure, High
Temperature, Low Water Level, Low Oil Level, Charge Failure, Over-time Stop, Emergency Stop Alarm System as well as Low Battery Voltage can be indicated in time.
The output connector is connected with traditional relay which can burden more output current. The parameters can also be set by the front face buttons so that it can be used in different kinds of situations.
Main Features:
Micro-computer Control
Man/Auto Start/Stop
5 Units LED tube Display
LED and Fault Alarm Code Indication
Two Group of programmed Relay output
Application for various kinds of Engine by self-setting
With RS485 communication port
Control:
Manual Start/Stop
Auto Start/Stop
Preheat Control
Auto idle control
Choke control
E.S.T control
Parameters Display:
Engine RPM
Generator Frequency Hz
Generator Phase voltage L-N
Generator current A
Engine battery voltage
Running time
Accumulation time
Engine water temperature
Engine oil pressure
Protection:
Emergency Stop
Over frequency stop
Under frequency stop
Over voltage stop
Under voltage stop
Over current stop
Low Oil Pressure Stop
High water temperature stop
Oil pressure sensor Open
Water temperature sensor Open
Start Failure
Stop Failure
Stop Failure
Low Water level stop
Low Water level stop
High Oil temperature stop
RPM signal lost alarm
Over speed stop
Under speed stop
Low Fuel Level warning
Low Battery voltage warning
Specification:
DC Supply: DC 8~36 V.
Power Consumption: MAX 3W.
Measuring Frequency:10~70 Hz.
AC input: AC 50~380 V.
Current measurement range:0-2000A.
Speed sensor Frequency:30-9999Hz
Relay output:
Warning:
Please don’t move battery during running status or it may cause the controller broken.
Package include: