WeldBend Catalog
WeldBend Catalog
SIXTY-THIRD
EDITION
Printed in U.S.A.
WELDBEND CORPORATION
6600 SOUTH HARLEM AVENUE, ARGO, IL 60501-1930
SALES General Office
TEL: 708/594-1700 TEL: 773/582-3500
FAX: 708/458-0106 FAX: 773/582-7621
www.weldbend.com
[email protected]
[email protected]
[email protected]
[email protected]
Table of Contents
PAGE
WELDBEND…TODAY..................................................................................................................................................................... 6
THE WELDBEND POLICY ............................................................................................................................................................ 21
ORDERING INFORMATION ........................................................................................................................................................ 22
TERMS AND CONDITIONS ........................................................................................................................................................ 23
FITTINGS ......................................................................................................................................................................................... 25
90° ELBOWS — Long Radius [Schedule: STD, XS, 40, 80, 160, XXS] ........................................................... 26
90° ELBOWS — Short Radius [Schedule: STD, XS, 40, 80, 160, XXS] .......................................................... 29
90° REDUCING ELBOWS — [Schedule: STD, XS, 40, 80] ................................................................................... 32
90° ELBOWS — 3R [Schedule: STD, XS, 40, 80] ................................................................................................... 36
45° ELBOWS — Long Radius [Schedule: STD, XS, 40, 80, 160, XXS] ........................................................... 38
45° ELBOWS — 3R [Schedule: STD, XS, 40, 80] ................................................................................................... 41
180° RETURN BENDS — Long Radius [Schedule: STD, XS, 40, 80, 160, XXS] .......................................... 43
180° RETURN BENDS — Short Radius [Schedule: STD, XS, 40, 80, 160, XXS] ......................................... 46
STRAIGHT TEES — [Schedule: STD, XS, 40, 80, 160, XXS] ................................................................................ 49
REDUCING TEES — [Schedule: STD, XS, 40, 80, 160, XXS] ............................................................................... 52
CONCENTRIC AND ECCENTRIC REDUCERS — [Schedule: STD, XS, 40, 80, 160, XXS] ............................ 62
CAPS — [Schedule: STD, XS, 40, 80, 160, XXS] .................................................................................................... 76
LAP JOINT STUB ENDS — [Schedule: STD, XS, 40, 80, 160, XXS]................................................................... 79
BOX QUANTITIES ........................................................................................................................................................... 82
FLANGES ......................................................................................................................................................................................... 84
CLASS 125 ....................................................................................................................................................................... 85
CLASS 150 ....................................................................................................................................................................... 86
CLASS 300 ....................................................................................................................................................................... 88
Class 600 ....................................................................................................................................................................... 90
Class 900 ....................................................................................................................................................................... 92
Class 1500 .................................................................................................................................................................... 94
Class 2500 .................................................................................................................................................................... 96
REDUCING SLIP-ON AND THREADED FLANGES — ALL CLASSES ............................................................... 98
CALCULATED FLANGE WEIGHTS ............................................................................................................................. 99
FLANGE PACKAGING ................................................................................................................................................. 105
TECHNICAL DATA INDEX ......................................................................................................................................................... 106
RING TYPE JOINT FACING DIMENSIONS ............................................................................................................................ 148
WEL0333-10.081610
10
11
12
13
14
15
16
• Weldbend Corporation pioneered the packing of carbon steel weld fittings in cartons, and we
still deliver products (in sizes up to 12") in strong corrugated cartons at no extra cost.
• Weldbend is PED Compliant. Weldbend maintains a strict quality control system ensuring it
continually meets the most current ISO Certifications.
18
19
21
SPECIAL MODIFICATIONS
If special modifications are required, the additional information must be supplied:
22
Note: This catalog is for the exclusive use of the Jobber or Distributor of Welding Fittings and Flanges.
The Weldbend Corporation of Chicago restricts its sales to Jobbers and/or Distributors only. 23
FITTINGS
1/2" through 60"
FITTINGS
FITTINGS
14 14.00 13.124 0.438 21.00 40 155.00
16 16.00 15.000 0.500 24.00 40 206.00 NOTES
18 18.00 16.876 0.562 27.00 40 262.00 1. Conforms to ASME B16.9 & ASTM A234 WPB.
20 20.00 18.812 0.594 30.00 40 324.00 2. All dimensions are in inches.
3. For bevel detail see page 107.
24 24.00 22.624 0.688 36.00 40 466.00 4. For dimensional tolerances see page 108.
5. For sizes larger than 24" please call.
6. All weights are in pounds and approximated
or estimated.
27
NOTES
1. Conforms to ASME B16.9 & ASTM A234 WPB.
2. All dimensions are in inches.
3. For bevel detail see page 107.
4. For dimensional tolerances see page 108.
5. All weights are in pounds and approximated
or estimated.
* This size and thickness does not correspond
to any pipe schedule number.
28
FITTINGS
18 18.00 17.250 0.375 18.00 * 163.00
20 20.00 19.250 0.375 20.00 20 210.00 NOTES
24 24.00 23.250 0.375 24.00 20 297.00 1. Conforms to ASME B16.9 & ASTM A234 WPB.
❖ 30 30.00 29.250 0.375 30.00 * 470.00 2. All dimensions are in inches.
3. For bevel detail see page 107.
❖ 36 36.00 35.250 0.375 36.00 * 692.00 4. For dimensional tolerances see page 108.
❖ 42 42.00 41.250 0.375 42.00 * 967.00 5. For sizes larger than 48" please call.
6. All weights are in pounds and approximated
❖ 48 48.00 47.250 0.375 48.00 * 1340.00 or estimated.
* This size and thickness does not correspond
to any pipe schedule number.
❖ In accordance with B16.9. Special Fittings
paragraph 4.4.2.
30
FITTINGS
20 20.00 16.062 1.969 20.00 160 1295.00
24 24.00 19.312 2.344 24.00 160 1450.00 NOTES
1. Conforms to ASME B16.9 & ASTM A234 WPB.
2. All dimensions are in inches.
3. For bevel detail see page 107.
4. For dimensional tolerances see page 108.
5. All weights are in pounds and approximated
or estimated.
NOTES
1. Conforms to ASME B16.9 & ASTM A234 WPB.
2. All dimensions are in inches.
3. For bevel detail see page 107.
4. For dimensional tolerances see page 108.
5. All weights are in pounds and approximated
or estimated.
* This size and thickness does not correspond
to any pipe schedule number.
31
32
FITTINGS
2 1/2 x 1 1/2 2.88 2.328 0.276 1.90 1.500 0.200 3.75 80 3.00
2 1/2 x 1 1/4 2.88 2.328 0.276 1.66 1.278 0.191 3.75 80 2.90
3 x 2 1/2 3.50 2.900 0.300 2.88 2.328 0.276 4.50 80 5.70
3x2 3.50 2.900 0.300 2.38 1.944 0.218 4.50 80 4.90
3 x 1 1/2 3.50 2.900 0.300 1.90 1.500 0.200 4.50 80 4.50
3 1/2 x 3 4.00 3.364 0.318 3.50 2.900 0.300 5.25 80 8.20
3 1/2 x 2 1/2 4.00 3.364 0.318 2.88 2.328 0.276 5.25 80 7.30
3 1/2 x 2 4.00 3.364 0.318 2.38 1.944 0.218 5.25 80 6.40
4 x 3 1/2 4.50 3.826 0.337 4.00 3.364 0.318 6.00 80 11.40
4x3 4.50 3.826 0.337 3.50 2.900 0.300 6.00 80 10.50
4 x 2 1/2 4.50 3.826 0.337 2.88 2.328 0.276 6.00 80 9.40
4x2 4.50 3.826 0.337 2.38 1.944 0.218 6.00 80 8.40
5x4 5.56 4.810 0.375 4.50 3.826 0.337 7.50 80 18.80
5 x 3 1/2 5.56 4.810 0.375 4.00 3.364 0.318 7.50 80 17.40
5x3 5.56 4.810 0.375 3.50 2.900 0.300 7.50 80 16.50
5 x 2 1/2 5.56 4.810 0.375 2.88 2.328 0.276 7.50 80 15.10
6x5 6.62 5.756 0.432 5.56 4.810 0.375 9.00 80 31.40
6x4 6.62 5.756 0.432 4.50 3.826 0.337 9.00 80 27.90
6 x 3 1/2 6.62 5.756 0.432 4.00 3.364 0.318 9.00 80 26.30
6x3 6.62 5.756 0.432 3.50 2.900 0.300 9.00 80 24.90
8x6 8.62 7.620 0.500 6.62 5.756 0.432 12.00 80 60.80
8x5 8.62 7.620 0.500 5.56 4.810 0.375 12.00 80 54.30
8x4 8.62 7.620 0.500 4.50 3.826 0.337 12.00 80 49.50
10 x 8 10.75 9.750 0.500 8.62 7.620 0.500 15.00 * 102.00
10 x 6 10.75 9.750 0.500 6.62 5.756 0.432 15.00 * 86.50
10 x 5 10.75 9.750 0.500 5.56 4.810 0.375 15.00 * 78.50
12 x 10 12.75 11.750 0.500 10.75 9.750 0.500 18.00 * 148.00
12 x 8 12.75 11.750 0.500 8.62 7.620 0.500 18.00 * 132.00
12 x 6 12.75 11.750 0.500 6.62 5.756 0.432 18.00 * 114.00
33
34
FITTINGS
2 1/2 x 1 1/2 2.88 2.328 0.276 1.90 1.500 0.200 3.75 80 3.00
2 1/2 x 1 1/4 2.88 2.328 0.276 1.66 1.278 0.191 3.75 80 2.90
3 x 2 1/2 3.50 2.900 0.300 2.88 2.328 0.276 4.50 80 5.70
3x2 3.50 2.900 0.300 2.38 1.944 0.218 4.50 80 4.90
3 x 1 1/2 3.50 2.900 0.300 1.90 1.500 0.200 4.50 80 4.50
3 1/2 x 3 4.00 3.364 0.318 3.50 2.900 0.300 5.25 80 8.20
3 1/2 x 2 1/2 4.00 3.364 0.318 2.88 2.328 0.276 5.25 80 7.30
3 1/2 x 2 4.00 3.364 0.318 2.38 1.944 0.218 5.25 80 6.40
4 x 3 1/2 4.50 3.826 0.337 4.00 3.364 0.318 6.00 80 11.40
4x3 4.50 3.826 0.337 3.50 2.900 0.300 6.00 80 10.50
4 x 2 1/2 4.50 3.826 0.337 2.88 2.328 0.276 6.00 80 9.40
4x2 4.50 3.826 0.337 2.38 1.944 0.218 6.00 80 8.40
5x4 5.56 4.810 0.375 4.50 3.826 0.337 7.50 80 18.80
5 x 3 1/2 5.56 4.810 0.375 4.00 3.364 0.318 7.50 80 17.40
5x3 5.56 4.810 0.375 3.50 2.900 0.300 7.50 80 16.50
5 x 2 1/2 5.56 4.810 0.375 2.88 2.328 0.276 7.50 80 15.10
6x5 6.62 5.756 0.432 5.56 4.810 0.375 9.00 80 31.40
6x4 6.62 5.756 0.432 4.50 3.826 0.337 9.00 80 27.90
6 x 3 1/2 6.62 5.756 0.432 4.00 3.364 0.318 9.00 80 26.30
6x3 6.62 5.756 0.432 3.50 2.900 0.300 9.00 80 24.90
8x6 8.62 7.620 0.500 6.62 5.756 0.432 12.00 80 60.80
8x5 8.62 7.620 0.500 5.56 4.810 0.375 12.00 80 54.30
8x4 8.62 7.620 0.500 4.50 3.826 0.337 12.00 80 49.50
10 x 8 10.75 9.562 0.594 8.62 7.620 0.500 15.00 80 105.00
10 x 6 10.75 9.562 0.594 6.62 5.756 0.432 15.00 80 90.00
10 x 5 10.75 9.562 0.594 5.56 4.810 0.375 15.00 80 80.00
12 x 10 12.75 11.374 0.688 10.75 9.562 0.594 18.00 80 155.00
12 x 8 12.75 11.374 0.688 8.62 7.620 0.500 18.00 80 135.00
12 x 6 12.75 11.374 0.688 6.62 5.756 0.432 18.00 80 120.00
35
FITTINGS
16 16.00 15.000 0.500 48.00 40 540.00
18 18.00 16.876 0.562 54.00 40 740.00 NOTES
20 20.00 18.812 0.594 60.00 40 950.00 1. Conforms to ASME B16.9 & ASTM A234 WPB.
24 24.00 22.624 0.688 72.00 40 1400.00 2. All dimensions are in inches.
3. For bevel detail see page 107.
4. For dimensional tolerances see page 108.
5. For sizes larger than 24" please call.
6. All weights are in pounds and approximated
or estimated.
37
FITTINGS
14 14.00 13.124 0.438 8.75 40 80.00
16 16.00 15.000 0.500 10.00 40 105.00 NOTES
18 18.00 16.876 0.562 11.25 40 130.00 1. Conforms to ASME B16.9 & ASTM A234 WPB.
20 20.00 18.812 0.594 12.50 40 165.00 2. All dimensions are in inches.
3. For bevel detail see page 107.
24 24.00 22.624 0.688 15.00 40 235.00 4. For dimensional tolerances see page 108.
5. For sizes larger than 24" please call.
6. All weights are in pounds and approximated
or estimated.
39
NOTES
1. Conforms to ASME B16.9 & ASTM A234 WPB.
2. All dimensions are in inches.
3. For bevel detail see page 107.
4. For dimensional tolerances see page 108.
5. All weights are in pounds and approximated
or estimated.
* This size and thickness does not correspond
to any pipe schedule number.
40
FITTINGS
16 16.00 15.250 0.375 19.88 30 193.00
18 18.00 17.250 0.375 22.38 * 248.00 NOTES
20 20.00 19.250 0.375 24.88 20 308.00 1. Conforms to ASME B16.9 & ASTM A234 WPB.
24 24.00 23.250 0.375 29.81 20 440.00 2. All dimensions are in inches.
3. For bevel detail see page 107.
4. For dimensional tolerances see page 108.
5. For sizes larger than 24" please call.
6. All weights are in pounds and approximated
or estimated.
* This size and thickness does not correspond
to any pipe schedule number.
42
FITTINGS
14 14.00 13.250 0.375 42.00 28.00 30 311.00
16 16.00 15.250 0.375 48.00 32.00 30 408.00 NOTES
18 18.00 17.250 0.375 54.00 36.00 * 514.00 1. Conforms to ASME B16.9 & ASTM A234 WPB.
20 20.00 19.250 0.375 60.00 40.00 20 636.00 2. All dimensions are in inches.
24 24.00 23.250 0.375 72.00 48.00 20 908.00 3. For bevel detail see page 107.
4. For dimensional tolerances see page 108.
5. For sizes larger than 24" please call.
6. All weights are in pounds and approximated
or estimated.
* This size and thickness does not correspond
to any pipe schedule number.
44
FITTINGS
16 16.00 12.812 1.594 48.00 32.00 160 510.00
18 18.00 14.438 1.781 54.00 36.00 160 642.50 NOTES
20 20.00 16.062 1.969 60.00 40.00 160 795.00 1. Conforms to ASME B16.9 & ASTM A234 WPB.
24 24.00 19.312 2.344 72.00 48.00 160 1135.00 2. All dimensions are in inches.
3. For bevel detail see page 107.
4. For dimensional tolerances see page 108.
5. All weights are in pounds and approximated
or estimated.
NOTES
1. Conforms to ASME B16.9 & ASTM A234 WPB.
2. All dimensions are in inches.
3. For bevel detail see page 107.
4. For dimensional tolerances see page 108.
5. All weights are in pounds and approximated
or estimated.
* This size and thickness does not correspond
to any pipe schedule number.
45
FITTINGS
18 18.00 16.876 0.562 36.00 27.00 40 335.00
20 20.00 18.812 0.594 40.00 30.00 40 425.00 NOTES
24 24.00 22.624 0.688 48.00 36.00 40 605.00 1. Conforms to ASME B16.9 & ASTM A234 WPB.
2. All dimensions are in inches.
3. For bevel detail see page 107.
4. For dimensional tolerances see page 108.
5. For sizes larger than 24" please call.
6. All weights are in pounds and approximated
or estimated.
47
NOTES
1. Conforms to ASME B16.9 & ASTM A234 WPB.
2. All dimensions are in inches.
3. For bevel detail see page 107.
4. For dimensional tolerances see page 108.
5. All weights are in pounds and approximated
or estimated.
* This size and thickness does not correspond
to any pipe schedule number.
48
FITTINGS
14 14.00 13.250 0.375 11.00 11.00 30 162.00
16 16.00 15.250 0.375 12.00 12.00 30 206.00 NOTES
18 18.00 17.250 0.375 13.50 13.50 * 272.00 1. Conforms to ASME B16.9 & ASTM A234 WPB.
20 20.00 19.250 0.375 15.00 15.00 20 350.00 2. All dimensions are in inches.
24 24.00 23.250 0.375 17.00 17.00 20 508.00 3. For bevel detail see page 107.
4. For dimensional tolerances see page 108.
30 30.00 29.250 0.375 22.00 22.00 * 835.00 5. For sizes larger than 48" please call.
36 36.00 35.250 0.375 26.50 26.50 * 1294.00 6. All weights are in pounds and approximated
42 42.00 41.250 0.375 30.00 28.00 * 1495.00 or estimated.
* This size and thickness does not correspond
48 48.00 47.250 0.375 35.00 33.00 * 2300.00 to any pipe schedule number.
50
FITTINGS
16 16.00 12.812 1.594 12.00 12.00 160 355.00
18 18.00 14.438 1.781 13.50 13.50 160 441.25 NOTES
20 20.00 16.062 1.969 15.00 15.00 160 552.50 1. Conforms to ASME B16.9 & ASTM A234 WPB.
24 24.00 19.312 2.344 17.00 17.00 160 781.25 2. All dimensions are in inches.
3. For bevel detail see page 107.
4. For dimensional tolerances see page 108.
5. All weights are in pounds and approximated
or estimated.
NOTES
1. Conforms to ASME B16.9 & ASTM A234 WPB.
2. All dimensions are in inches.
3. For bevel detail see page 107.
4. For dimensional tolerances see page 108.
5. All weights are in pounds and approximated
or estimated.
* This size and thickness does not correspond
to any pipe schedule number.
51
1 1/4 x 1/2 1.66 1.380 0.140 1.88 0.84 0.622 0.109 1.88 40 1.30
1 1/2 x 1 1/4 1.90 1.610 0.145 2.25 1.66 1.380 0.140 2.25 40 2.00
1 1/2 x 1 1.90 1.610 0.145 2.25 1.32 1.049 0.133 2.25 40 1.90
1 1/2 x 3/4 1.90 1.610 0.145 2.25 1.05 0.824 0.113 2.25 40 1.80
1 1/2 x 1/2 1.90 1.610 0.145 2.25 0.84 0.622 0.109 2.25 40 1.80
2 x 1 1/2 2.38 2.067 0.154 2.50 1.90 1.610 0.145 2.38 40 3.10
2 x 1 1/4 2.38 2.067 0.154 2.50 1.66 1.380 0.140 2.25 40 3.00
2x1 2.38 2.067 0.154 2.50 1.32 1.049 0.133 2.00 40 2.80
2 x 3/4 2.38 2.067 0.154 2.50 1.05 0.824 0.113 1.75 40 2.50
2 1/2 x 2 2.88 2.469 0.203 3.00 2.38 2.067 0.154 2.75 40 5.40
2 1/2 x 1 1/2 2.88 2.469 0.203 3.00 1.90 1.610 0.145 2.62 40 5.10
2 1/2 x 1 1/4 2.88 2.469 0.203 3.00 1.66 1.380 0.140 2.50 40 4.80
2 1/2 x 1 2.88 2.469 0.203 3.00 1.32 1.049 0.133 2.25 40 4.60
3 x 2 1/2 3.50 3.068 0.216 3.38 2.88 2.469 0.203 3.25 40 7.20
3x2 3.50 3.068 0.216 3.38 2.38 2.067 0.154 3.00 40 7.00
3 x 1 1/2 3.50 3.068 0.216 3.38 1.90 1.610 0.145 2.88 40 6.80
3 x 1 1/4 3.50 3.068 0.216 3.38 1.66 1.380 0.140 2.75 40 6.60
❖3x1 3.50 3.068 0.216 3.38 1.32 1.049 0.133 2.62 40 6.50
3 1/2 x 3 4.00 3.548 0.226 3.75 3.50 3.068 0.216 3.62 40 9.80
3 1/2 x 2 1/2 4.00 3.548 0.226 3.75 2.88 2.474 0.203 3.50 40 9.40
3 1/2 x 2 4.00 3.548 0.226 3.75 2.38 2.072 0.154 3.25 40 9.20
3 1/2 x 1 1/2 4.00 3.548 0.226 3.75 1.90 1.610 0.145 3.12 40 8.90
4 x 3 1/2 4.50 4.026 0.237 4.12 4.00 3.548 0.226 4.00 40 11.90
4x3 4.50 4.026 0.237 4.12 3.50 3.068 0.216 3.88 40 11.60
4 x 2 1/2 4.50 4.026 0.237 4.12 2.88 2.469 0.203 3.75 40 11.40
4x2 4.50 4.026 0.237 4.12 2.38 2.067 0.154 3.50 40 11.20
4 x 1 1/2 4.50 4.026 0.237 4.12 1.90 1.610 0.145 3.38 40 11.20
5x4 5.56 5.047 0.258 4.88 4.50 4.026 0.237 4.62 40 20.50
5 x 3 1/2 5.56 5.047 0.258 4.88 4.00 3.548 0.226 4.50 40 20.00
5x3 5.56 5.047 0.258 4.88 3.50 3.068 0.216 4.38 40 19.40
5 x 2 1/2 5.56 5.047 0.258 4.88 2.88 2.469 0.203 4.25 40 19.00
5x2 5.56 5.047 0.258 4.88 2.38 2.067 0.154 4.12 40 18.80
6x5 6.62 6.065 0.280 5.62 5.56 5.047 0.258 5.38 40 32.00
6x4 6.62 6.065 0.280 5.62 4.50 4.026 0.237 5.12 40 30.50
6 x 3 1/2 6.62 6.065 0.280 5.62 4.00 3.548 0.226 5.00 40 30.00
6x3 6.62 6.065 0.280 5.62 3.50 3.068 0.216 4.88 40 30.00
6 x 2 1/2 6.62 6.065 0.280 5.62 2.88 2.469 0.203 4.75 40 29.70
❖6x2 6.62 6.065 0.280 5.62 2.38 2.067 0.154 4.75 40 29.00
8x6 8.62 7.981 0.322 7.00 6.62 6.065 0.280 6.62 40 56.50
52
8x5 8.62 7.981 0.322 7.00 5.56 5.047 0.258 6.38 40 54.00
8x4 8.62 7.981 0.322 7.00 4.50 4.026 0.237 6.12 40 53.20
Copyright © 2010 by Weldbend Corporation. All Rights Reserved.
TEL: 708/594-1700
FAX: 708/458-0106
www.weldbend.com reducing tees
FITTINGS
14 x 8 14.00 13.250 0.375 11.00 8.62 7.981 0.322 9.75 * 146.00
14 x 6 14.00 13.250 0.375 11.00 6.62 6.065 0.280 9.38 * 145.00
16 x 14 16.00 15.250 0.375 12.00 14.00 13.250 0.375 12.00 * 221.00
16 x 12 16.00 15.250 0.375 12.00 12.75 12.000 0.375 11.62 * 213.00
16 x 10 16.00 15.250 0.375 12.00 10.75 10.020 0.365 11.12 * 197.00
16 x 8 16.00 15.250 0.375 12.00 8.62 7.981 0.322 10.75 * 190.00
16 x 6 16.00 15.250 0.375 12.00 6.62 6.060 0.280 10.38 * 180.00
18 x 16 18.00 17.250 0.375 13.50 16.00 15.250 0.375 13.00 * 262.00
18 x 14 18.00 17.250 0.375 13.50 14.00 13.250 0.375 13.00 * 248.00
18 x 12 18.00 17.250 0.375 13.50 12.75 12.000 0.375 12.62 * 241.00
18 x 10 18.00 17.250 0.375 13.50 10.75 10.020 0.365 12.12 * 229.00
18 x 8 18.00 17.250 0.375 13.50 8.62 7.981 0.322 11.75 * 216.00
20 x 18 20.00 19.250 0.375 15.00 18.00 17.250 0.375 14.50 * 352.00
20 x 16 20.00 19.250 0.375 15.00 16.00 15.250 0.375 14.00 * 339.00
20 x 14 20.00 19.250 0.375 15.00 14.00 13.250 0.375 14.00 * 327.00
20 x 12 20.00 19.250 0.375 15.00 12.75 12.000 0.375 13.62 * 315.00
20 x 10 20.00 19.250 0.375 15.00 10.75 10.020 0.365 13.12 * 305.00
20 x 8 20.00 19.250 0.375 15.00 8.62 7.976 0.322 12.75 * 293.00
24 x 20 24.00 23.250 0.375 17.00 20.00 19.250 0.375 17.00 * 500.00
24 x 18 24.00 23.250 0.375 17.00 18.00 17.250 0.375 16.50 * 487.00
24 x 16 24.00 23.250 0.375 17.00 16.00 15.250 0.375 16.00 * 475.00
24 x 14 24.00 23.250 0.375 17.00 14.00 13.250 0.375 16.00 * 465.00
24 x 12 24.00 23.250 0.375 17.00 12.75 12.000 0.375 15.62 * 450.00
24 x 10 24.00 23.250 0.375 17.00 10.75 10.020 0.365 15.12 * 447.00
30 x 24 30.00 29.250 0.375 22.00 24.00 23.250 0.375 21.00 * 795.00
30 x 20 30.00 29.250 0.375 22.00 20.00 19.250 0.375 20.00 * 749.00
30 x 18 30.00 29.250 0.375 22.00 18.00 17.250 0.375 19.50 * 727.00
30 x 16 30.00 29.250 0.375 22.00 16.00 15.250 0.375 19.00 * 715.00
36 x 30 36.00 35.250 0.375 26.50 30.00 29.250 0.375 25.00 * 1207.00
36 x 24 36.00 35.250 0.375 26.50 24.00 23.250 0.375 24.00 * 1129.00
36 x 20 36.00 35.250 0.375 26.50 20.00 19.250 0.375 23.00 * 1072.00
36 x 18 36.00 35.250 0.375 26.50 18.00 17.250 0.375 22.50 * 1136.00
42 x 36 42.00 41.250 0.375 30.00 36.00 35.250 0.375 28.00 * 1415.00
42 x 30 42.00 41.250 0.375 30.00 30.00 29.250 0.375 28.00 * 1327.00
42 x 24 42.00 41.250 0.375 30.00 24.00 23.250 0.375 26.00 * 1248.00
42 x 20 42.00 41.250 0.375 30.00 20.00 19.250 0.375 26.00 * 1200.00
48 x 42 48.00 47.250 0.375 35.00 42.00 41.250 0.375 32.00 * 2207.00
48 x 36 48.00 47.250 0.375 35.00 36.00 35.250 0.375 31.00 * 2127.00
48 x 30 48.00 47.250 0.375 35.00 30.00 29.250 0.375 30.00 * 2048.00
48 x 24 48.00 47.250 0.375 35.00 24.00 23.250 0.375 29.00 * 1900.00
53
1 1/4 x 1/2 1.66 1.278 0.191 1.88 0.84 0.546 0.147 1.88 80 1.60
1 1/2 x 1 1/4 1.90 1.500 0.200 2.25 1.66 1.278 0.191 2.25 80 2.40
1 1/2 x 1 1.90 1.500 0.200 2.25 1.32 0.957 0.179 2.25 80 2.30
1 1/2 x 3/4 1.90 1.500 0.200 2.25 1.05 0.742 0.154 2.25 80 2.20
1 1/2 x 1/2 1.90 1.500 0.200 2.25 0.84 0.546 0.147 2.25 80 2.20
2 x 1 1/2 2.38 1.944 0.218 2.50 1.90 1.500 0.200 2.38 80 3.80
2 x 1 1/4 2.38 1.944 0.218 2.50 1.66 1.278 0.191 2.25 80 3.70
2x1 2.38 1.944 0.218 2.50 1.32 0.957 0.179 2.00 80 3.50
2 x 3/4 2.38 1.944 0.218 2.50 1.05 0.742 0.154 1.75 80 3.50
2 1/2 x 2 2.88 2.323 0.276 3.00 2.38 1.944 0.218 2.75 80 6.30
2 1/2 x 1 1/2 2.88 2.323 0.276 3.00 1.90 1.500 0.200 2.62 80 6.20
2 1/2 x 1 1/4 2.88 2.323 0.276 3.00 1.66 1.278 0.191 2.50 80 6.00
2 1/2 x 1 2.88 2.323 0.276 3.00 1.32 0.957 0.179 2.25 80 5.80
3 x 2 1/2 3.50 2.900 0.300 3.38 2.88 2.323 0.276 3.25 80 8.80
3x2 3.50 2.900 0.300 3.38 2.38 1.939 0.218 3.00 80 8.60
3 x 1 1/2 3.50 2.900 0.300 3.38 1.90 1.500 0.200 2.88 80 8.10
3 x 1 1/4 3.50 2.900 0.300 3.38 1.66 1.278 0.191 2.75 80 8.00
❖3x1 3.50 2.900 0.300 3.38 1.32 0.957 0.179 2.62 80 7.80
3 1/2 x 3 4.00 3.364 0.318 3.75 3.50 2.900 0.300 3.62 80 12.60
3 1/2 x 2 1/2 4.00 3.364 0.318 3.75 2.88 2.323 0.276 3.50 80 12.10
3 1/2 x 2 4.00 3.364 0.318 3.75 2.38 1.939 0.218 3.25 80 11.70
3 1/2 x 1 1/2 4.00 3.364 0.318 3.75 1.90 1.500 0.200 3.12 80 11.60
4 x 3 1/2 4.50 3.826 0.337 4.12 4.00 3.364 0.318 4.00 80 15.70
4x3 4.50 3.826 0.337 4.12 3.50 2.900 0.300 3.88 80 15.40
4 x 2 1/2 4.50 3.826 0.337 4.12 2.88 2.323 0.276 3.75 80 15.10
4x2 4.50 3.826 0.337 4.12 2.38 1.939 0.218 3.50 80 15.10
4 x 1 1/2 4.50 3.826 0.337 4.12 1.90 1.500 0.200 3.38 80 15.00
5x4 5.56 4.813 0.375 4.88 4.50 3.826 0.337 4.62 80 25.40
5 x 3 1/2 5.56 4.813 0.375 4.88 4.00 3.364 0.318 4.50 80 24.80
5x3 5.56 4.813 0.375 4.88 3.50 2.900 0.300 4.38 80 24.20
5 x 2 1/2 5.56 4.813 0.375 4.88 2.88 2.323 0.276 4.25 80 23.90
5x2 5.56 4.813 0.375 4.88 2.38 1.939 0.218 4.12 80 23.60
6x5 6.62 5.761 0.432 5.62 5.56 4.813 0.375 5.38 80 39.50
6x4 6.62 5.761 0.432 5.62 4.50 3.826 0.337 5.12 80 39.30
6 x 3 1/2 6.62 5.761 0.432 5.62 4.00 3.364 0.318 5.00 80 38.80
6x3 6.62 5.761 0.432 5.62 3.50 2.900 0.300 4.88 80 38.60
6 x 2 1/2 6.62 5.761 0.432 5.62 2.88 2.323 0.276 4.75 80 38.20
❖6x2 6.62 5.761 0.432 5.62 2.38 1.939 0.218 4.75 80 37.40
8x6 8.62 7.625 0.500 7.00 6.62 5.761 0.432 6.62 80 70.20
8x5 8.62 7.625 0.500 7.00 5.56 4.813 0.375 6.38 80 69.40
54
8x4 8.62 7.625 0.500 7.00 4.50 3.826 0.337 6.12 80 69.20
Copyright © 2010 by Weldbend Corporation. All Rights Reserved.
TEL: 708/594-1700
FAX: 708/458-0106
www.weldbend.com reducing tees
FITTINGS
14 x 8 14.00 13.000 0.500 11.00 8.62 7.625 0.500 9.75 * 200.00
14 x 6 14.00 13.000 0.500 11.00 6.62 5.761 0.432 9.38 * 196.00
16 x 14 16.00 15.000 0.500 12.00 14.00 13.000 0.500 12.00 * 268.00
16 x 12 16.00 15.000 0.500 12.00 12.75 11.750 0.500 11.62 * 261.00
16 x 10 16.00 15.000 0.500 12.00 10.75 9.750 0.500 11.12 * 250.00
16 x 8 16.00 15.000 0.500 12.00 8.62 7.625 0.500 10.75 * 240.00
16 x 6 16.00 15.000 0.500 12.00 6.62 5.761 0.432 10.38 * 235.00
18 x 16 18.00 17.000 0.500 13.50 16.00 15.000 0.500 13.00 * 348.00
18 x 14 18.00 17.000 0.500 13.50 14.00 13.000 0.500 13.00 * 335.00
18 x 12 18.00 17.000 0.500 13.50 12.75 11.750 0.500 12.62 * 328.00
18 x 10 18.00 17.000 0.500 13.50 10.75 9.750 0.500 12.12 * 308.00
18 x 8 18.00 17.000 0.500 13.50 8.62 7.625 0.500 11.75 * 300.00
20 x 18 20.00 19.000 0.500 15.00 18.00 17.000 0.500 14.50 * 445.00
20 x 16 20.00 19.000 0.500 15.00 16.00 15.000 0.500 14.00 * 427.00
20 x 14 20.00 19.000 0.500 15.00 14.00 13.000 0.500 14.00 * 412.00
20 x 12 20.00 19.000 0.500 15.00 12.75 11.750 0.500 13.62 * 397.00
20 x 10 20.00 19.000 0.500 15.00 10.75 9.750 0.500 13.12 * 384.00
20 x 8 20.00 19.000 0.500 15.00 8.62 7.625 0.500 12.75 * 375.00
24 x 20 24.00 23.000 0.500 17.00 20.00 19.000 0.500 17.00 * 610.00
24 x 18 24.00 23.000 0.500 17.00 18.00 17.000 0.500 16.50 * 588.00
24 x 16 24.00 23.000 0.500 17.00 16.00 15.000 0.500 16.00 * 578.00
24 x 14 24.00 23.000 0.500 17.00 14.00 13.000 0.500 16.00 * 565.00
24 x 12 24.00 23.000 0.500 17.00 12.75 11.750 0.500 15.62 * 558.00
24 x 10 24.00 23.000 0.500 17.00 10.75 9.750 0.500 15.12 * 550.00
30 x 24 30.00 29.000 0.500 22.00 24.00 23.000 0.500 21.00 * 994.00
30 x 20 30.00 29.000 0.500 22.00 20.00 19.000 0.500 20.00 * 945.00
30 x 18 30.00 29.000 0.500 22.00 18.00 17.000 0.500 19.50 * 920.00
30 x 16 30.00 29.000 0.500 22.00 16.00 15.000 0.500 19.00 * 900.00
36 x 30 36.00 35.000 0.500 26.50 30.00 29.000 0.500 25.00 * 1510.00
36 x 24 36.00 35.000 0.500 26.50 24.00 23.000 0.500 24.00 * 1415.00
36 x 20 36.00 35.000 0.500 26.50 20.00 19.000 0.500 23.00 * 1345.00
36 x 18 36.00 35.000 0.500 26.50 18.00 17.000 0.500 22.50 * 1321.00
42 x 36 42.00 41.000 0.500 30.00 36.00 35.000 0.500 28.00 * 1709.00
42 x 30 42.00 41.000 0.500 30.00 30.00 29.000 0.500 28.00 * 1629.00
42 x 24 42.00 41.000 0.500 30.00 24.00 23.000 0.500 26.00 * 1550.00
42 x 20 42.00 41.000 0.500 30.00 20.00 19.000 0.500 26.00 * 1500.00
48 x 42 48.00 47.000 0.500 35.00 42.00 41.000 0.500 32.00 * 2207.00
48 x 36 48.00 47.000 0.500 35.00 36.00 35.000 0.500 31.00 * 2127.00
48 x 30 48.00 47.000 0.500 35.00 30.00 29.000 0.500 30.00 * 2048.00
48 x 24 48.00 47.000 0.500 35.00 24.00 23.000 0.500 29.00 * 1980.00
55
56
FITTINGS
10 x 5 10.75 9.562 0.594 8.50 5.56 4.810 0.375 7.50 80 144.38
10 x 4 10.75 9.562 0.594 8.50 4.50 3.826 0.337 7.25 80 143.50
❖ 10 x 3 10.75 9.562 0.594 8.50 3.50 2.900 0.300 7.25 80 142.00
12 x 10 12.75 11.374 0.688 10.00 10.75 9.562 0.594 9.50 80 215.25
12 x 8 12.75 11.374 0.688 10.00 8.62 7.620 0.500 9.00 80 210.00
12 x 6 12.75 11.374 0.688 10.00 6.62 5.756 0.432 8.62 80 206.50
12 x 5 12.75 11.374 0.688 10.00 5.56 4.810 0.375 8.50 80 204.75
❖ 12 x 4 12.75 11.374 0.688 10.00 4.50 3.826 0.337 8.50 80 196.00
14 x 12 14.00 12.500 0.750 11.00 12.75 11.374 0.688 10.62 80 264.25
14 x 10 14.00 12.500 0.750 11.00 10.75 9.562 0.594 10.12 80 259.00
14 x 8 14.00 12.500 0.750 11.00 8.62 7.620 0.500 9.75 80 255.50
14 x 6 14.00 12.500 0.750 11.00 6.62 5.756 0.432 9.38 80 253.75
16 x 14 16.00 14.312 0.844 12.00 14.00 12.500 0.750 12.00 80 386.75
16 x 12 16.00 14.312 0.844 12.00 12.75 11.374 0.688 11.62 80 372.75
16 x 10 16.00 14.312 0.844 12.00 10.75 9.562 0.594 11.12 80 344.75
16 x 8 16.00 14.312 0.844 12.00 8.62 7.620 0.500 10.75 80 332.50
16 x 6 16.00 14.312 0.844 12.00 6.62 5.756 0.432 10.38 80 315.00
18 x 16 18.00 16.124 0.938 13.50 16.00 14.312 0.844 13.00 80 458.50
18 x 14 18.00 16.124 0.938 13.50 14.00 12.500 0.750 13.00 80 434.00
18 x 12 18.00 16.124 0.938 13.50 12.75 11.374 0.688 12.62 80 421.75
18 x 10 18.00 16.124 0.938 13.50 10.75 9.562 0.594 12.12 80 400.75
18 x 8 18.00 16.124 0.938 13.50 8.62 7.620 0.500 11.75 80 378.00
20 x 18 20.00 17.938 1.031 15.00 18.00 16.124 0.938 14.50 80 616.00
20 x 16 20.00 17.938 1.031 15.00 16.00 14.312 0.844 14.00 80 593.25
20 x 14 20.00 17.938 1.031 15.00 14.00 12.500 0.750 14.00 80 572.25
20 x 12 20.00 17.938 1.031 15.00 12.75 11.374 0.688 13.62 80 551.25
20 x 10 20.00 17.938 1.031 15.00 10.75 9.562 0.594 13.12 80 533.75
20 x 8 20.00 17.938 1.031 15.00 8.62 7.620 0.500 12.75 80 512.75
24 x 20 24.00 21.562 1.219 17.00 20.00 17.938 1.031 17.00 80 875.00
24 x 18 24.00 21.562 1.219 17.00 18.00 16.124 0.938 16.50 80 852.25
24 x 16 24.00 21.562 1.219 17.00 16.00 14.312 0.844 16.00 80 831.25
24 x 14 24.00 21.562 1.219 17.00 14.00 12.500 0.750 16.00 80 813.75
24 x 12 24.00 21.562 1.219 17.00 12.75 11.374 0.688 15.62 80 787.50
24 x 10 24.00 21.562 1.219 17.00 10.75 9.562 0.594 15.12 80 782.25
57
1 1/4 x 3/4 1.66 1.160 0.250 1.88 1.05 0.612 0.219 1.88 160 2.24
1 1/4 x 1/2 1.66 1.160 0.250 1.88 0.84 0.464 0.188 1.88 160 2.24
1 1/2 x 1 1/4 1.90 1.338 0.281 2.25 1.66 1.160 0.250 2.25 160 3.36
1 1/2 x 1 1.90 1.338 0.281 2.25 1.32 0.820 0.250 2.25 160 3.22
1 1/2 x 3/4 1.90 1.338 0.281 2.25 1.05 0.612 0.219 2.25 160 3.08
1 1/2 x 1/2 1.90 1.338 0.281 2.25 0.84 0.464 0.188 2.25 160 3.08
2 x 1 1/2 2.38 1.692 0.344 2.50 1.90 1.338 0.281 2.38 160 5.32
2 x 1 1/4 2.38 1.692 0.344 2.50 1.66 1.160 0.250 2.25 160 5.18
2x1 2.38 1.692 0.344 2.50 1.32 0.820 0.250 2.00 160 4.90
2 x 3/4 2.38 1.692 0.344 2.50 1.05 0.612 0.219 1.75 160 4.90
2 1/2 x 2 2.88 2.130 0.375 3.00 2.38 1.692 0.344 2.75 160 8.82
2 1/2 x 1 1/2 2.88 2.130 0.375 3.00 1.90 1.338 0.281 2.62 160 8.68
2 1/2 x 1 1/4 2.88 2.130 0.375 3.00 1.66 1.160 0.250 2.50 160 8.40
2 1/2 x 1 2.88 2.130 0.375 3.00 1.32 0.820 0.250 2.25 160 8.12
3 x 2 1/2 3.50 2.624 0.438 3.38 2.88 2.130 0.375 3.25 160 12.32
3x2 3.50 2.624 0.438 3.38 2.38 1.692 0.344 3.00 160 12.04
3 x 1 1/2 3.50 2.624 0.438 3.38 1.90 1.338 0.281 2.88 160 11.34
3 x 1 1/4 3.50 2.624 0.438 3.38 1.66 1.160 0.250 2.75 160 11.20
❖3x1 3.50 2.624 0.438 3.38 1.32 0.820 0.250 2.62 160 11.20
4x3 4.50 3.438 0.531 4.12 3.50 2.624 0.438 3.88 160 21.56
4 x 2 1/2 4.50 3.438 0.531 4.12 2.88 2.130 0.375 3.75 160 21.14
4x2 4.50 3.438 0.531 4.12 2.38 1.692 0.344 3.50 160 21.14
4 x 1 1/2 4.50 3.438 0.531 4.12 1.90 1.338 0.281 3.38 160 21.00
5x4 5.56 4.310 0.625 4.88 4.50 3.438 0.531 4.62 160 35.56
5x3 5.56 4.310 0.625 4.88 3.50 2.624 0.438 4.38 160 33.88
5 x 2 1/2 5.56 4.310 0.625 4.88 2.88 2.130 0.375 4.25 160 33.46
5x2 5.56 4.310 0.625 4.88 2.38 1.692 0.344 4.12 160 33.04
6x5 6.62 5.182 0.719 5.62 5.56 4.310 0.625 5.38 160 55.30
6x4 6.62 5.182 0.719 5.62 4.50 3.438 0.531 5.12 160 55.02
6x3 6.62 5.182 0.719 5.62 3.50 2.624 0.438 4.88 160 54.04
6 x 2 1/2 6.62 5.182 0.719 5.62 2.88 2.130 0.375 4.75 160 53.48
❖6x2 6.62 5.182 0.719 5.62 2.38 1.692 0.344 4.75 160 52.36
58
FITTINGS
14 x 12 14.00 11.188 1.406 11.00 12.75 10.126 1.312 10.62 160 294.00
14 x 10 14.00 11.188 1.406 11.00 10.75 8.500 1.125 10.12 160 284.20
14 x 8 14.00 11.188 1.406 11.00 8.62 6.808 0.906 9.75 160 280.00
14 x 6 14.00 11.188 1.406 11.00 6.62 5.182 0.719 9.38 160 274.40
16 x 14 16.00 12.812 1.594 12.00 14.00 11.188 1.406 12.00 160 375.20
16 x 12 16.00 12.812 1.594 12.00 12.75 10.126 1.312 11.62 160 365.40
16 x 10 16.00 12.812 1.594 12.00 10.75 8.500 1.125 11.12 160 350.00
16 x 8 16.00 12.812 1.594 12.00 8.62 6.808 0.906 10.75 160 336.00
16 x 6 16.00 12.812 1.594 12.00 6.62 5.182 0.719 10.38 160 329.00
18 x 16 18.00 14.438 1.781 13.50 16.00 12.812 1.594 13.00 160 487.20
18 x 14 18.00 14.438 1.781 13.50 14.00 11.188 1.406 13.00 160 469.00
18 x 12 18.00 14.438 1.781 13.50 12.75 10.126 1.312 12.62 160 459.20
18 x 10 18.00 14.438 1.781 13.50 10.75 8.500 1.125 12.12 160 431.20
18 x 8 18.00 14.438 1.781 13.50 8.62 6.808 0.906 11.75 160 420.00
20 x 18 20.00 16.062 1.969 15.00 18.00 14.438 1.781 14.50 160 623.00
20 x 16 20.00 16.062 1.969 15.00 16.00 12.812 1.594 14.00 160 597.80
20 x 14 20.00 16.062 1.969 15.00 14.00 11.188 1.406 14.00 160 576.80
20 x 12 20.00 16.062 1.969 15.00 12.75 10.126 1.312 13.62 160 555.80
20 x 10 20.00 16.062 1.969 15.00 10.75 8.500 1.125 13.12 160 537.60
20 x 8 20.00 16.062 1.969 15.00 8.62 6.808 0.906 12.75 160 525.00
24 x 20 24.00 19.312 2.344 17.00 20.00 16.062 1.969 17.00 160 854.00
24 x 18 24.00 19.312 2.344 17.00 18.00 14.438 1.781 16.50 160 823.20
24 x 16 24.00 19.312 2.344 17.00 16.00 12.812 1.594 16.00 160 809.20
24 x 14 24.00 19.312 2.344 17.00 14.00 11.188 1.406 16.00 160 791.00
24 x 12 24.00 19.312 2.344 17.00 12.75 10.126 1.312 15.62 160 781.20
24 x 10 24.00 19.312 2.344 17.00 10.75 8.500 1.125 15.12 160 770.00
59
1 1/4 x 3/4 1.66 0.896 0.382 1.88 1.05 0.434 0.308 1.88 * 2.52
1 1/4 x 1/2 1.66 0.896 0.382 1.88 0.84 0.252 0.294 1.88 * 2.52
1 1/2 x 1 1/4 1.90 1.100 0.400 2.25 1.66 0.896 0.382 2.25 * 3.78
1 1/2 x 1 1.90 1.100 0.400 2.25 1.32 0.604 0.358 2.25 * 3.62
1 1/2 x 3/4 1.90 1.100 0.400 2.25 1.05 0.434 0.308 2.25 * 3.47
1 1/2 x 1/2 1.90 1.100 0.400 2.25 0.84 0.252 0.294 2.25 * 3.47
2 x 1 1/2 2.38 1.508 0.436 2.50 1.90 1.100 0.400 2.38 * 5.99
2 x 1 1/4 2.38 1.508 0.436 2.50 1.66 0.896 0.382 2.25 * 5.83
2x1 2.38 1.508 0.436 2.50 1.32 0.604 0.358 2.00 * 5.51
2 x 3/4 2.38 1.508 0.436 2.50 1.05 0.434 0.308 1.75 * 5.51
2 1/2 x 2 2.88 1.776 0.552 3.00 2.38 1.508 0.436 2.75 * 9.92
2 1/2 x 1 1/2 2.88 1.776 0.552 3.00 1.90 1.100 0.400 2.62 * 9.77
2 1/2 x 1 1/4 2.88 1.776 0.552 3.00 1.66 0.896 0.382 2.50 * 9.45
2 1/2 x 1 2.88 1.776 0.552 3.00 1.32 0.604 0.358 2.25 * 9.14
3 x 2 1/2 3.50 2.300 0.600 3.38 2.88 1.776 0.552 3.25 * 13.86
3x2 3.50 2.300 0.600 3.38 2.38 1.508 0.436 3.00 * 13.55
3 x 1 1/2 3.50 2.300 0.600 3.38 1.90 1.100 0.400 2.88 * 12.76
3 x 1 1/4 3.50 2.300 0.600 3.38 1.66 0.896 0.382 2.75 * 12.60
❖3x1 3.50 2.300 0.600 3.38 1.32 0.604 0.358 2.62 * 12.60
4x3 4.50 3.152 0.674 4.12 3.50 2.300 0.600 3.88 * 24.26
4 x 2 1/2 4.50 3.152 0.674 4.12 2.88 1.776 0.552 3.75 * 23.78
4x2 4.50 3.152 0.674 4.12 2.38 1.508 0.436 3.50 * 23.78
4 x 1 1/2 4.50 3.152 0.674 4.12 1.90 1.100 0.400 3.38 * 23.63
5x4 5.56 4.060 0.750 4.88 4.50 3.152 0.674 4.62 * 40.01
5x3 5.56 4.060 0.750 4.88 3.50 2.300 0.600 4.38 * 38.12
5 x 2 1/2 5.56 4.060 0.750 4.88 2.88 1.776 0.552 4.25 * 37.64
5x2 5.56 4.060 0.750 4.88 2.38 1.508 0.436 4.12 * 37.17
60
FITTINGS
12 x 10 12.75 10.750 1.000 10.00 10.75 8.750 1.000 9.50 * 259.88
12 x 8 12.75 10.750 1.000 10.00 8.62 6.870 0.875 9.00 * 245.70
12 x 6 12.75 10.750 1.000 10.00 6.62 4.892 0.864 8.62 * 237.83
12 x 5 12.75 10.750 1.000 10.00 5.56 4.060 0.750 8.50 * 234.68
❖ 12 x 4 12.75 10.750 1.000 10.00 4.50 3.152 0.674 8.50 * 233.10
61
3/4 x 1/2 1.05 0.824 0.113 0.84 0.622 0.109 1.50 40 0.21
1 x 3/4 1.32 1.054 0.133 1.05 0.824 0.113 2.00 40 0.36
1 x 1/2 1.32 1.054 0.133 0.84 0.622 0.109 2.00 40 0.36
1 1/4 x 1 1.66 1.380 0.140 1.32 1.054 0.133 2.00 40 0.48
1 1/4 x 3/4 1.66 1.380 0.140 1.05 0.824 0.113 2.00 40 0.42
1 1/4 x 1/2 1.66 1.380 0.140 0.84 0.622 0.109 2.00 40 0.42
1 1/2 x 1 1/4 1.90 1.610 0.145 1.66 1.380 0.140 2.50 40 0.65
1 1/2 x 1 1.90 1.610 0.145 1.32 1.054 0.133 2.50 40 0.57
1 1/2 x 3/4 1.90 1.610 0.145 1.05 0.824 0.113 2.50 40 0.56
1 1/2 x 1/2 1.90 1.610 0.145 0.84 0.622 0.109 2.50 40 0.56
2 x 1 1/2 2.38 2.072 0.154 1.90 1.610 0.145 3.00 40 0.94
2 x 1 1/4 2.38 2.072 0.154 1.66 1.380 0.140 3.00 40 0.88
2x1 2.38 2.072 0.154 1.32 1.054 0.133 3.00 40 0.81
2 x 3/4 2.38 2.072 0.154 1.05 0.824 0.113 3.00 40 0.74
2 1/2 x 2 2.88 2.474 0.203 2.38 2.072 0.154 3.50 40 1.60
2 1/2 x 1 1/2 2.88 2.474 0.203 1.90 1.610 0.145 3.50 40 1.50
2 1/2 x 1 1/4 2.88 2.474 0.203 1.66 1.380 0.140 3.50 40 1.40
2 1/2 x 1 2.88 2.474 0.203 1.32 1.054 0.133 3.50 40 1.30
3 x 2 1/2 3.50 3.068 0.216 2.88 2.474 0.203 3.50 40 2.20
3x2 3.50 3.068 0.216 2.38 2.072 0.154 3.50 40 2.00
3 x 1 1/2 3.50 3.068 0.216 1.90 1.610 0.145 3.50 40 1.90
3 x 1 1/4 3.50 3.068 0.216 1.66 1.380 0.140 3.50 40 1.80
❖3x1 3.50 3.068 0.216 1.32 1.054 0.133 3.50 40 1.70
3 1/2 x 3 4.00 3.548 0.226 3.50 3.068 0.216 4.00 40 2.80
3 1/2 x 2 1/2 4.00 3.548 0.226 2.88 2.474 0.203 4.00 40 2.70
3 1/2 x 2 4.00 3.548 0.226 2.38 2.072 0.154 4.00 40 2.60
3 1/2 x 1 1/2 4.00 3.548 0.226 1.90 1.610 0.145 4.00 40 2.60
3 1/2 x 1 1/4 4.00 3.548 0.226 1.66 1.380 0.140 4.00 40 2.50
4 x 3 1/2 4.50 4.026 0.237 4.00 3.548 0.226 4.00 40 3.50
4x3 4.50 4.026 0.237 3.50 3.068 0.216 4.00 40 3.30
4 x 2 1/2 4.50 4.026 0.237 2.88 2.474 0.203 4.00 40 3.20
4x2 4.50 4.026 0.237 2.38 2.072 0.154 4.00 40 3.10
62 4 x 1 1/2 4.50 4.026 0.237 1.90 1.610 0.145 4.00 40 3.00
Copyright © 2010 by Weldbend Corporation. All Rights Reserved.
TEL: 708/594-1700
FAX: 708/458-0106
www.weldbend.com concentric and eccentric reducers
FITTINGS
❖ 6x2 6.62 6.060 0.280 2.38 2.072 0.154 5.50 40 6.50
8x6 8.62 7.976 0.322 6.62 6.060 0.280 6.00 40 12.30
8x5 8.62 7.976 0.322 5.56 5.044 0.258 6.00 40 11.50
8x4 8.62 7.976 0.322 4.50 4.026 0.237 6.00 40 10.80
8 x 3 1/2 8.62 7.976 0.322 4.00 3.548 0.226 6.00 40 10.60
❖ 8x3 8.62 7.976 0.322 3.50 3.068 0.216 6.00 40 9.80
10 x 8 10.75 10.020 0.365 8.62 7.976 0.322 7.00 40 22.10
10 x 6 10.75 10.020 0.365 6.62 6.060 0.280 7.00 40 20.70
10 x 5 10.75 10.020 0.365 5.56 5.044 0.258 7.00 40 19.50
10 x 4 10.75 10.020 0.365 4.50 4.026 0.237 7.00 40 18.40
12 x 10 12.75 12.000 0.375 10.75 10.020 0.365 8.00 * 32.40
12 x 8 12.75 12.000 0.375 8.62 7.976 0.322 8.00 * 30.50
12 x 6 12.75 12.000 0.375 6.62 6.060 0.280 8.00 * 29.50
12 x 5 12.75 12.000 0.375 5.56 5.044 0.258 8.00 * 27.80
❖ 12 x 4 12.75 12.000 0.375 4.50 4.026 0.237 8.00 * 26.20
14 x 12 14.00 13.250 0.375 12.75 12.000 0.375 13.00 * 63.10
14 x 10 14.00 13.250 0.375 10.75 10.020 0.365 13.00 * 61.40
14 x 8 14.00 13.250 0.375 8.62 7.976 0.322 13.00 * 60.00
14 x 6 14.00 13.250 0.375 6.62 6.060 0.280 13.00 * 59.20
16 x 14 16.00 15.250 0.375 14.00 13.250 0.375 14.00 * 75.40
16 x 12 16.00 15.250 0.375 12.75 12.000 0.375 14.00 * 72.70
16 x 10 16.00 15.250 0.375 10.75 10.020 0.365 14.00 * 71.10
16 x 8 16.00 15.250 0.375 8.62 7.976 0.322 14.00 * 69.40
❖ 16 x 6 16.00 15.250 0.375 6.62 6.060 0.280 14.00 * 67.40
18 x 16 18.00 17.250 0.375 16.00 15.250 0.375 15.00 * 87.30
18 x 14 18.00 17.250 0.375 14.00 13.250 0.375 15.00 * 86.00
18 x 12 18.00 17.250 0.375 12.75 12.000 0.375 15.00 * 84.80
18 x 10 18.00 17.250 0.375 10.75 10.020 0.365 15.00 * 83.70
❖ 18 x 8 18.00 17.250 0.375 8.62 7.976 0.322 15.00 * 81.75
20 x 18 20.00 19.250 0.375 18.00 17.250 0.375 20.00 * 123.00
20 x 16 20.00 19.250 0.375 16.00 15.250 0.375 20.00 * 121.00
20 x 14 20.00 19.250 0.375 14.00 13.250 0.375 20.00 * 119.00 63
64
FITTINGS
1 x 3/4 1.32 0.962 0.179 1.05 0.742 0.154 2.00 80 0.43
1 x 1/2 1.32 0.962 0.179 0.84 0.546 0.147 2.00 80 0.42
1 1/4 x 1 1.66 1.278 0.191 1.32 0.962 0.179 2.00 80 0.57
1 1/4 x 3/4 1.66 1.278 0.191 1.05 0.742 0.154 2.00 80 0.53
1 1/4 x 1/2 1.66 1.278 0.191 0.84 0.546 0.147 2.00 80 0.50
1 1/2 x 1 1/4 1.90 1.500 0.200 1.66 1.278 0.191 2.50 80 0.78
1 1/2 x 1 1.90 1.500 0.200 1.32 0.962 0.179 2.50 80 0.72
1 1/2 x 3/4 1.90 1.500 0.200 1.05 0.742 0.154 2.50 80 0.65
1 1/2 x 1/2 1.90 1.500 0.200 0.84 0.546 0.147 2.50 80 0.65
2 x 1 1/2 2.38 1.944 0.218 1.90 1.500 0.200 3.00 80 1.20
2 x 1 1/4 2.38 1.944 0.218 1.66 1.278 0.191 3.00 80 1.10
2x1 2.38 1.944 0.218 1.32 0.962 0.179 3.00 80 1.00
2 x 3/4 2.38 1.944 0.218 1.05 0.742 0.154 3.00 80 0.94
2 1/2 x 2 2.88 2.328 0.276 2.38 1.944 0.218 3.50 80 2.10
2 1/2 x 1 1/2 2.88 2.328 0.276 1.90 1.500 0.200 3.50 80 1.90
2 1/2 x 1 1/4 2.88 2.328 0.276 1.66 1.278 0.191 3.50 80 1.70
2 1/2 x 1 2.88 2.328 0.276 1.32 0.962 0.179 3.50 80 1.50
3 x 2 1/2 3.50 2.900 0.300 2.88 2.328 0.276 3.50 80 2.80
3x2 3.50 2.900 0.300 2.38 1.944 0.218 3.50 80 2.60
3 x 1 1/2 3.50 2.900 0.300 1.90 1.500 0.200 3.50 80 2.40
3 x 1 1/4 3.50 2.900 0.300 1.66 1.278 0.191 3.50 80 2.30
❖3x1 3.50 2.900 0.300 1.32 0.962 0.179 3.50 80 2.20
3 1/2 x 3 4.00 3.364 0.318 3.50 2.900 0.300 4.00 80 3.70
3 1/2 x 2 1/2 4.00 3.364 0.318 2.88 2.328 0.276 4.00 80 3.50
3 1/2 x 2 4.00 3.364 0.318 2.38 1.944 0.218 4.00 80 3.30
3 1/2 x 1 1/2 4.00 3.364 0.318 1.90 1.500 0.200 4.00 80 3.20
3 1/2 x 1 1/4 4.00 3.364 0.318 1.66 1.278 0.191 4.00 80 3.20
4 x 3 1/2 4.50 3.826 0.337 4.00 3.364 0.318 4.00 80 4.90
4x3 4.50 3.826 0.337 3.50 2.900 0.300 4.00 80 4.70
4 x 2 1/2 4.50 3.826 0.337 2.88 2.328 0.276 4.00 80 4.60
4x2 4.50 3.826 0.337 2.38 1.944 0.218 4.00 80 4.30
4 x 1 1/2 4.50 3.826 0.337 1.90 1.500 0.200 4.00 80 4.20 65
FITTINGS
20 x 12 20.00 19.000 0.500 12.75 11.750 0.500 20.00 * 155.00
❖ 20 x 10 20.00 19.000 0.500 10.75 9.750 0.500 20.00 * 152.00
24 x 20 24.00 23.000 0.500 20.00 19.000 0.500 20.00 * 201.00
24 x 18 24.00 23.000 0.500 18.00 17.000 0.500 20.00 * 197.00
24 x 16 24.00 23.000 0.500 16.00 15.000 0.500 20.00 * 194.00
❖ 24 x 14 24.00 23.000 0.500 14.00 13.000 0.500 20.00 * 190.00
❖ 24 x 12 24.00 23.000 0.500 12.75 11.750 0.500 20.00 * 188.00
❖ 24 x 10 24.00 23.000 0.500 10.75 9.750 0.500 20.00 * 186.00
30 x 24 30.00 29.000 0.500 24.00 23.000 0.500 24.00 * 315.00
30 x 20 30.00 29.000 0.500 20.00 19.000 0.500 24.00 * 315.00
❖ 30 x 18 30.00 29.000 0.500 18.00 17.000 0.500 24.00 * 315.00
36 x 30 36.00 35.000 0.500 30.00 29.000 0.500 24.00 * 379.00
36 x 24 36.00 35.000 0.500 24.00 23.000 0.500 24.00 * 379.00
❖ 36 x 20 36.00 35.000 0.500 20.00 19.000 0.500 24.00 * 379.00
42 x 36 42.00 41.000 0.500 36.00 35.000 0.500 24.00 * 443.00
42 x 30 42.00 41.000 0.500 30.00 29.000 0.500 24.00 * 443.00
❖ 42 x 24 42.00 41.000 0.500 24.00 23.000 0.500 24.00 * 443.00
48 x 42 48.00 47.000 0.500 42.00 41.000 0.500 28.00 * 525.00
❖ 48 x 36 48.00 47.000 0.500 36.00 35.000 0.500 28.00 * 525.00
❖ 48 x 30 48.00 47.000 0.500 30.00 29.000 0.500 28.00 * 525.00
❖ 48 x 24 48.00 47.000 0.500 24.00 23.000 0.500 28.00 * 525.00
67
FITTINGS
FOR DIMENSION SPECIFICATIONS
1/2" THROUGH 8" REFER TO SCHEDULE XS
10 x 8 10.75 9.562 0.594 8.62 7.620 0.500 7.00 80 37.50
10 x 6 10.75 9.562 0.594 6.62 5.756 0.432 7.00 80 37.50
10 x 5 10.75 9.562 0.594 5.56 4.810 0.375 7.00 80 37.50
10 x 4 10.75 9.562 0.594 4.50 3.826 0.337 7.00 80 37.50
12 x 10 12.75 11.374 0.688 10.75 9.562 0.594 8.00 80 59.00
12 x 8 12.75 11.374 0.688 8.62 7.620 0.500 8.00 80 59.00
12 x 6 12.75 11.374 0.688 6.62 5.756 0.432 8.00 80 59.00
12 x 5 12.75 11.374 0.688 5.56 4.810 0.375 8.00 80 59.00
❖ 12 x 4 12.75 11.374 0.688 4.50 3.826 0.337 8.00 80 59.00
14 x 12 14.00 12.500 0.750 12.75 11.374 0.688 13.00 80 115.00
14 x 10 14.00 12.500 0.750 10.75 9.562 0.594 13.00 80 115.00
14 x 8 14.00 12.500 0.750 8.62 7.620 0.500 13.00 80 115.00
14 x 6 14.00 12.500 0.750 6.62 5.756 0.432 13.00 80 115.00
16 x 14 16.00 14.312 0.844 14.00 12.500 0.750 14.00 80 159.00
16 x 12 16.00 14.312 0.844 12.75 11.374 0.688 14.00 80 159.00
16 x 10 16.00 14.312 0.844 10.75 9.562 0.594 14.00 80 159.00
16 x 8 16.00 14.312 0.844 8.62 7.620 0.500 14.00 80 159.00
❖ 16 x 6 16.00 14.312 0.844 6.62 5.756 0.432 14.00 80 159.00
18 x 16 18.00 16.124 0.938 16.00 14.312 0.844 15.00 80 213.00
18 x 14 18.00 16.124 0.938 14.00 12.500 0.750 15.00 80 213.00
18 x 12 18.00 16.124 0.938 12.75 11.374 0.688 15.00 80 213.00
18 x 10 18.00 16.124 0.938 10.75 9.562 0.594 15.00 80 213.00
❖ 18 x 8 18.00 16.124 0.938 8.62 7.620 0.500 15.00 80 213.00
69
70
FITTINGS
1 x 3/4 1.32 0.820 0.250 1.05 0.612 0.219 2.00 160 0.45
1 x 1/2 1.32 0.820 0.250 0.84 0.464 0.188 2.00 160 0.45
1 1/4 x 1 1.66 1.160 0.250 1.32 0.820 0.250 2.00 160 0.70
1 1/4 x 3/4 1.66 1.160 0.250 1.05 0.612 0.219 2.00 160 0.70
1 1/4 x 1/2 1.66 1.160 0.250 0.84 0.464 0.188 2.00 160 0.70
1 1/2 x 1 1/4 1.90 1.338 0.281 1.66 1.160 0.250 2.50 160 0.90
1 1/2 x 1 1.90 1.338 0.281 1.32 0.820 0.250 2.50 160 0.90
1 1/2 x 3/4 1.90 1.338 0.281 1.05 0.612 0.219 2.50 160 0.90
1 1/2 x 1/2 1.90 1.338 0.281 0.84 0.464 0.188 2.50 160 0.90
2 x 1 1/2 2.38 1.692 0.344 1.90 1.338 0.281 3.00 160 1.85
2 x 1 1/4 2.38 1.692 0.344 1.66 1.160 0.250 3.00 160 1.85
2x1 2.38 1.692 0.344 1.32 0.820 0.250 3.00 160 1.85
2 x 3/4 2.38 1.692 0.344 1.05 0.612 0.219 3.00 160 1.50
2 1/2 x 2 2.88 2.130 0.375 2.38 1.692 0.344 3.50 160 3.00
2 1/2 x 1 1/2 2.88 2.130 0.375 1.90 1.338 0.281 3.50 160 3.00
2 1/2 x 1 1/4 2.88 2.130 0.375 1.66 1.160 0.250 3.50 160 2.80
2 1/2 x 1 2.88 2.130 0.375 1.32 0.820 0.250 3.50 160 2.80
3 x 2 1/2 3.50 2.624 0.438 2.88 2.130 0.375 3.50 160 4.00
3x2 3.50 2.624 0.438 2.38 1.692 0.344 3.50 160 4.00
3 x 1 1/2 3.50 2.624 0.438 1.90 1.338 0.281 3.50 160 4.00
3 x 1 1/4 3.50 2.624 0.438 1.66 1.160 0.250 3.50 160 3.50
❖ 3x1 3.50 2.624 0.438 1.32 0.820 0.250 3.50 160 3.50
4x3 4.50 3.438 0.531 3.50 2.624 0.438 4.00 160 6.00
4 x 2 1/2 4.50 3.438 0.531 2.88 2.130 0.375 4.00 160 6.00
4x2 4.50 3.438 0.531 2.38 1.692 0.344 4.00 160 5.00
4 x 1 1/2 4.50 3.438 0.531 1.90 1.338 0.281 4.00 160 5.00
❖ 4 x 1 1/4 4.50 3.438 0.531 1.66 1.160 0.250 4.00 160 5.00
❖ 4x1 4.50 3.438 0.531 1.32 0.820 0.250 4.00 160 5.00
71
5x4 5.56 4.310 0.625 4.50 3.438 0.531 5.00 160 14.00
5x3 5.56 4.310 0.625 3.50 2.624 0.438 5.00 160 14.00
5 x 2 1/2 5.56 4.310 0.625 2.88 2.130 0.375 5.00 160 14.00
5x2 5.56 4.310 0.625 2.38 1.692 0.344 5.00 160 14.00
6x5 6.62 5.182 0.719 5.56 4.310 0.625 5.50 160 18.00
6x4 6.62 5.182 0.719 4.50 3.438 0.531 5.50 160 18.00
6x3 6.62 5.182 0.719 3.50 2.624 0.438 5.50 160 15.50
6 x 2 1/2 6.62 5.182 0.719 2.88 2.130 0.375 5.50 160 15.50
❖ 6x2 6.62 5.182 0.719 2.38 1.692 0.344 5.50 160 15.00
8x6 8.62 6.808 0.906 6.62 5.182 0.719 6.00 160 31.50
8x5 8.62 6.808 0.906 5.56 4.310 0.625 6.00 160 28.00
8x4 8.62 6.808 0.906 4.50 3.438 0.531 6.00 160 28.00
❖ 8x3 8.62 6.808 0.906 3.50 2.624 0.438 6.00 160 30.00
10 x 8 10.75 8.500 1.125 8.62 6.808 0.906 7.00 160 58.00
10 x 6 10.75 8.500 1.125 6.62 5.182 0.719 7.00 160 58.00
10 x 5 10.75 8.500 1.125 5.56 4.310 0.625 7.00 160 54.00
10 x 4 10.75 8.500 1.125 4.50 3.438 0.531 7.00 160 52.00
12 x 10 12.75 10.126 1.312 10.75 8.500 1.125 8.00 160 95.00
12 x 8 12.75 10.126 1.312 8.62 6.808 0.906 8.00 160 85.00
12 x 6 12.75 10.126 1.312 6.62 5.182 0.719 8.00 160 80.00
12 x 5 12.75 10.126 1.312 5.56 4.310 0.625 8.00 160 80.00
❖ 12 x 4 12.75 10.126 1.312 4.50 3.438 0.531 8.00 160 80.00
14 x 12 14.00 11.188 1.406 12.75 10.126 1.312 13.00 160 115.00
14 x 10 14.00 11.188 1.406 10.75 8.500 1.125 13.00 160 115.00
14 x 8 14.00 11.188 1.406 8.62 6.808 0.906 13.00 160 159.00
14 x 6 14.00 11.188 1.406 6.62 5.182 0.719 13.00 160 159.00
16 x 14 16.00 12.812 1.594 14.00 11.188 1.406 14.00 160 159.00
16 x 12 16.00 12.812 1.594 12.75 10.126 1.312 14.00 160 159.00
16 x 10 16.00 12.812 1.594 10.75 8.500 1.125 14.00 160 159.00
16 x 8 16.00 12.812 1.594 8.62 6.808 0.906 14.00 160 213.00
❖ 16 x 6 16.00 12.812 1.594 6.62 5.182 0.719 14.00 160 213.00
72
FITTINGS
24 x 16 24.00 19.312 2.344 16.00 12.812 1.594 20.00 160 535.00
❖ 24 x 14 24.00 19.312 2.344 14.00 11.188 1.406 20.00 160 535.00
❖ 24 x 12 24.00 19.312 2.344 12.75 10.126 1.312 20.00 160 535.00
❖ 24 x 10 24.00 19.312 2.344 10.75 8.500 1.125 20.00 160 535.00
73
3/4 x 1/2 1.05 0.434 0.308 0.84 0.252 0.294 1.50 * 0.39
1 x 3/4 1.32 0.604 0.358 1.05 0.434 0.308 2.00 * 0.50
1 x 1/2 1.32 0.604 0.358 0.84 0.252 0.294 2.00 * 0.50
1 1/4 x 1 1.66 0.896 0.382 1.32 0.604 0.358 2.00 * 0.75
1 1/4 x 3/4 1.66 0.896 0.382 1.05 0.434 0.308 2.00 * 0.75
1 1/4 x 1/2 1.66 0.896 0.382 0.84 0.252 0.294 2.00 * 0.75
1 1/2 x 1 1/4 1.90 1.100 0.400 1.66 0.896 0.382 2.50 * 1.00
1 1/2 x 1 1.90 1.100 0.400 1.32 0.604 0.358 2.50 * 1.00
1 1/2 x 3/4 1.90 1.100 0.400 1.05 0.434 0.308 2.50 * 1.00
1 1/2 x 1/2 1.90 1.100 0.400 0.84 0.252 0.294 2.50 * 1.00
2 x 1 1/2 2.38 1.508 0.436 1.90 1.100 0.400 3.00 * 2.00
2 x 1 1/4 2.38 1.508 0.436 1.66 0.896 0.382 3.00 * 2.00
2x1 2.38 1.508 0.436 1.32 0.604 0.358 3.00 * 2.00
2 x 3/4 2.38 1.508 0.436 1.05 0.434 0.308 3.00 * 1.75
2 1/2 x 2 2.88 1.776 0.552 2.38 1.508 0.436 3.50 * 4.00
2 1/2 x 1 1/2 2.88 1.776 0.552 1.90 1.100 0.400 3.50 * 4.00
2 1/2 x 1 1/4 2.88 1.776 0.552 1.66 0.896 0.382 3.50 * 3.50
2 1/2 x 1 2.88 1.776 0.552 1.32 0.604 0.358 3.50 * 3.50
3 x 2 1/2 3.50 2.300 0.600 2.88 1.776 0.552 3.50 * 5.00
3x2 3.50 2.300 0.600 2.38 1.508 0.436 3.50 * 5.00
3 x 1 1/2 3.50 2.300 0.600 1.90 1.100 0.400 3.50 * 5.00
3 x 1 1/4 3.50 2.300 0.600 1.66 0.896 0.382 3.50 * 4.50
❖3x1 3.50 2.300 0.600 1.32 0.604 0.358 3.50 * 4.50
4x3 4.50 3.152 0.674 3.50 2.300 0.600 4.00 * 8.00
4 x 2 1/2 4.50 3.152 0.674 2.88 1.776 0.552 4.00 * 8.00
4x2 4.50 3.152 0.674 2.38 1.508 0.436 4.00 * 7.50
4 x 1 1/2 4.50 3.152 0.674 1.90 1.100 0.400 4.00 * 7.50
❖ 4 x 1 1/4 4.50 3.152 0.674 1.66 0.896 0.382 4.00 * 7.50
❖4x1 4.50 3.152 0.674 1.32 0.604 0.358 4.00 * 7.00
74
FITTINGS
❖8x3 8.62 6.870 0.875 3.50 2.300 0.600 6.00 * 33.00
10 x 8 10.75 8.750 1.000 8.62 6.870 0.875 7.00 * 48.00
10 x 6 10.75 8.750 1.000 6.62 4.892 0.864 7.00 * 58.00
10 x 5 10.75 8.750 1.000 5.56 4.060 0.750 7.00 * 54.00
10 x 4 10.75 8.750 1.000 4.50 3.152 0.674 7.00 * 52.00
12 x 10 12.75 10.750 1.000 10.75 8.750 1.000 8.00 * 95.00
12 x 8 12.75 10.750 1.000 8.62 6.870 0.875 8.00 * 85.00
12 x 6 12.75 10.750 1.000 6.62 4.892 0.864 8.00 * 80.00
12 x 5 12.75 10.750 1.000 5.56 4.060 0.750 8.00 * 80.00
❖ 12 x 4 12.75 10.750 1.000 4.50 3.152 0.674 8.00 * 80.00
75
FITTINGS
14 14.00 13.124 0.438 6.50 40 36.50
16 16.00 15.000 0.500 7.00 40 43.50 NOTES
18 18.00 16.876 0.562 9.00 40 57.00 1. Conforms to ASME B16.9 & ASTM A234 WPB.
2. All dimensions are in inches.
20 20.00 18.812 0.594 10.00 40 75.70 3. For bevel detail see page 107.
24 24.00 22.624 0.688 12.00 40 101.00 4. For dimensional tolerances see page 108.
5. For sizes larger than 24" please call.
6. All weights are in pounds and approximated
or estimated.
7. The shape of the cap is 2:1 ellipsoidal and
conforms to the shape requirements given
in the ASME Boiler and Pressure Vessel Code.
NOTES
1. Conforms to ASME B16.9 & ASTM A234 WPB.
2. All dimensions are in inches.
3. For bevel detail see page 107.
4. For dimensional tolerances see page 108.
5. All weights are in pounds and approximated
or estimated.
6. The shape of the cap is 2:1 ellipsoidal and
conforms to the shape requirements given
in the ASME Boiler and Pressure Vessel Code.
* This size and thickness does not correspond
to any pipe schedule number.
78
Outside Outside Wall and Lap Lap Fillet Overall Pipe Approx.
Schedule STD
Pipe Diameter Diameter Thickness Diameter Radius Length Schedule Weight in
Size (Max.) (Min.) Number Pounds
T K N J
1/2 0.896 0.809 0.109 1.38 0.12 3.00 40 0.30
3/4 1.106 1.019 0.113 1.69 0.12 3.00 40 0.40
1 1.376 1.284 0.133 2.00 0.12 4.00 40 0.75
1 1/4 1.716 1.629 0.140 2.50 0.19 4.00 40 1.10
1 1/2 1.965 1.869 0.145 2.88 0.25 4.00 40 1.25
2 2.456 2.344 0.154 3.62 0.31 6.00 40 2.25
2 1/2 2.966 2.844 0.203 4.12 0.31 6.00 40 3.50
3 3.596 3.469 0.216 5.00 0.38 6.00 40 4.75
3 1/2 4.096 3.969 0.226 5.50 0.38 6.00 40 6.00
4 4.593 4.469 0.237 6.19 0.44 6.00 40 7.25
5 5.683 5.532 0.258 7.31 0.44 8.00 40 12.00
6 6.743 6.594 0.280 8.50 0.50 8.00 40 16.00
8 8.743 8.594 0.322 10.62 0.50 8.00 40 23.00
10 10.913 10.719 0.365 12.75 0.50 10.00 40 36.00
12 12.913 12.719 0.375 15.00 0.50 10.00 * 47.00
FITTINGS
14 14.170 13.969 0.375 16.25 0.50 12.00 30 35.40
16 16.180 15.969 0.375 18.50 0.50 12.00 30 44.80 NOTES
18 18.190 17.969 0.375 21.00 0.50 12.00 * 57.20 1. Conforms to ASME B16.9 & ASTM A234 WPB.
20 20.240 19.969 0.375 23.00 0.50 12.00 20 71.00 2. All dimensions are in inches.
24 24.240 23.969 0.375 27.25 0.50 12.00 20 102.00 3. For bevel detail see page 107.
4. For dimensional tolerances see page 108.
5. All weights are in pounds and approximated
or estimated.
* This size and thickness does not correspond
to any pipe schedule number.
Outside Outside Wall and Lap Lap Fillet Overall Pipe Approx.
SCHEDULE XS
Pipe Diameter Diameter Thickness Diameter Radius Length Schedule Weight in
Size (Max.) (Min.) Number Pounds
T K N J
1/2 0.896 0.809 0.147 1.38 0.12 3.00 80 0.38
3/4 1.106 1.019 0.154 1.69 0.12 3.00 80 0.51
1 1.376 1.284 0.179 2.00 0.12 4.00 80 1.00
1 1/4 1.716 1.629 0.191 2.50 0.19 4.00 80 1.25
1 1/2 1.965 1.869 0.200 2.88 0.25 4.00 80 1.75
2 2.456 2.344 0.218 3.62 0.31 6.00 80 3.00
2 1/2 2.966 2.844 0.276 4.12 0.31 6.00 80 4.50
3 3.596 3.469 0.300 5.00 0.38 6.00 80 6.50
3 1/2 4.096 3.969 0.318 5.50 0.38 6.00 80 7.75
4 4.593 4.469 0.337 6.19 0.44 6.00 80 9.50
5 5.683 5.532 0.375 7.31 0.44 8.00 80 17.00
6 6.743 6.594 0.432 8.50 0.50 8.00 80 23.00
8 8.743 8.594 0.500 10.62 0.50 8.00 80 32.00
10 10.913 10.719 0.500 12.75 0.50 10.00 60 53.00
12 12.913 12.719 0.500 15.00 0.50 10.00 * 62.00
14 14.170 13.969 0.500 16.25 0.50 12.00 * 89.00
16 16.180 15.969 0.500 18.50 0.50 12.00 40 96.00 NOTES
18 18.190 17.969 0.500 21.00 0.50 12.00 * 112.00 1. Conforms to ASME B16.9 & ASTM A234 WPB.
20 20.240 19.969 0.500 23.00 0.50 12.00 30 125.00 2. All dimensions are in inches.
24 24.240 23.969 0.500 27.25 0.50 12.00 * 151.00 3. For bevel detail see page 107.
4. For dimensional tolerances see page 108.
5. All weights are in pounds and approximated
or estimated.
* This size and thickness does not correspond
to any pipe schedule number.
79
SCHEDULE 80 Outside Outside Wall and Lap Lap Fillet Overall Pipe Approx.
Pipe Diameter Diameter Thickness Diameter Radius Length Schedule Weight in
Size (Max.) (Min.) Number Pounds
T K N J
1/2 0.896 0.809 0.147 1.38 0.12 3.00 80 0.38
3/4 1.106 1.019 0.154 1.69 0.12 3.00 80 0.51
1 1.376 1.284 0.179 2.00 0.12 4.00 80 1.00
1 1/4 1.716 1.629 0.191 2.50 0.19 4.00 80 1.25
1 1/2 1.965 1.869 0.200 2.88 0.25 4.00 80 1.75
2 2.456 2.344 0.218 3.62 0.31 6.00 80 3.00
2 1/2 2.966 2.844 0.276 4.12 0.31 6.00 80 4.50
3 3.596 3.469 0.300 5.00 0.38 6.00 80 6.50
3 1/2 4.096 3.969 0.318 5.50 0.38 6.00 80 7.75
4 4.593 4.469 0.337 6.19 0.44 6.00 80 9.50
5 5.683 5.532 0.375 7.31 0.44 8.00 80 17.00
6 6.743 6.594 0.432 8.50 0.50 8.00 80 23.00
8 8.743 8.594 0.500 10.62 0.50 8.00 80 32.00
10 10.913 10.719 0.594 12.75 0.50 10.00 80 63.00
12 12.913 12.719 0.688 15.00 0.50 10.00 80 87.00
14 14.170 13.969 0.750 16.25 0.50 12.00 80 123.00
NOTES 16 16.180 15.969 0.844 18.50 0.50 12.00 80 161.00
1. Conforms to ASME B16.9 & ASTM A234 WPB. 18 18.190 17.969 0.938 21.00 0.50 12.00 80 205.00
2. All dimensions are in inches. 20 20.240 19.969 1.031 23.00 0.50 12.00 80 251.00
3. For bevel detail see page 107. 24 24.240 23.969 1.219 27.25 0.50 12.00 80 359.00
4. For dimensional tolerances see page 108.
5. All weights are in pounds and approximated
or estimated.
80
Outside Outside Wall and Lap Lap Fillet Overall Pipe Approx.
Schedule 160
Pipe Diameter Diameter Thickness Diameter Radius Length Schedule Weight in
Size (Max.) (Min.) Number Pounds
T K N J
1/2 0.896 0.809 0.188 1.38 0.12 3.00 160 0.75
3/4 1.106 1.019 0.219 1.69 0.12 3.00 160 0.95
1 1.376 1.284 0.250 2.00 0.12 4.00 160 1.13
1 1/4 1.716 1.629 0.250 2.50 0.19 4.00 160 1.51
1 1/2 1.965 1.869 0.281 2.88 0.25 4.00 160 2.02
2 2.456 2.344 0.344 3.62 0.31 6.00 160 4.51
2 1/2 2.966 2.844 0.375 4.12 0.31 6.00 160 6.02
3 3.596 3.469 0.438 5.00 0.38 6.00 160 8.80
4 4.593 4.469 0.531 6.19 0.44 6.00 160 14.10
5 5.683 5.532 0.625 7.31 0.44 8.00 160 26.40
6 6.743 6.594 0.719 8.50 0.50 8.00 160 36.40
8 8.743 8.594 0.906 10.62 0.50 8.00 160 60.00
10 10.913 10.719 1.125 12.75 0.50 10.00 160 113.00
12 12.913 12.719 1.312 15.00 0.50 10.00 160 160.00
14 14.170 13.969 1.406 16.25 0.50 12.00 160 190.00
FITTINGS
16 16.180 15.969 1.594 18.50 0.50 12.00 160 245.00
18 18.190 17.969 1.781 21.00 0.50 12.00 160 309.00 NOTES
20 20.240 19.969 1.969 23.00 0.50 12.00 160 379.00 1. Conforms to ASME B16.9 & ASTM A234 WPB.
24 24.240 23.969 2.344 27.25 0.50 12.00 160 542.00 2. All dimensions are in inches.
3. For bevel detail see page 107.
4. For dimensional tolerances see page 108.
5. All weights are in pounds and approximated
or estimated.
Outside Outside Wall and Lap Lap Fillet Overall Pipe Approx.
SCHEDULE XXS
Pipe Diameter Diameter Thickness Diameter Radius Length Schedule Weight in
Size (Max.) (Min.) Number Pounds
T K N J
1/2 0.896 0.809 0.294 1.38 0.12 3.00 * 1.75
3/4 1.106 1.019 0.308 1.69 0.12 3.00 * 2.50
1 1.376 1.284 0.358 2.00 0.12 4.00 * 4.00
1 1/4 1.716 1.629 0.382 2.50 0.19 4.00 * 6.25
1 1/2 1.965 1.869 0.400 2.88 0.25 4.00 * 6.50
2 2.456 2.344 0.436 3.62 0.31 6.00 * 9.00
2 1/2 2.966 2.844 0.552 4.12 0.31 6.00 * 14.00
3 3.596 3.469 0.600 5.00 0.38 6.00 * 18.50
4 4.593 4.469 0.674 6.19 0.44 6.00 * 27.50
5 5.683 5.532 0.750 7.31 0.44 8.00 * 39.00
6 6.743 6.594 0.864 8.50 0.50 8.00 * 54.00
8 8.743 8.594 0.875 10.62 0.50 8.00 * 73.00
10 10.913 10.719 1.000 12.75 0.50 10.00 140 116.00
12 12.913 12.719 1.000 15.00 0.50 10.00 120 167.00
NOTES
1. Conforms to ASME B16.9 & ASTM A234 WPB.
2. All dimensions are in inches.
3. For bevel detail see page 107.
4. For dimensional tolerances see page 108.
5. All weights are in pounds and approximated
or estimated.
* This size and thickness does not correspond
to any pipe schedule number.
81
Box Quantities Short Radius 90° Elbows Long Radius 90° Elbows Straight Tees Caps
Size / Wall STD XS STD XS STD XS STD XS
1/2" — — 6-bag 6-bag 6-bag 6-bag — —
3/4" — — 4-bag 4-bag 6-bag 6-bag 6-bag 6-bag
1" — — 4-bag 4-bag 6-bag 6-bag 6-bag 6-bag
1 1/4" — — 12 4-bag 6-bag 6-bag 6-bag 6-bag
1 1/2" — — 12 4-bag 6-bag 6-bag 6-bag 6-bag
2" — — 12 12 — — 12 12
2 1/2" — — 12 12 12 — 12 12
3" — — 12 12 6 — 12 12
3 1/2" — — 8 8 — — — —
4" — — 12 12 6 — 12 12
5" — — 6 6 — — 6 6
6" — — 4 4 4 — 6 6
FITTINGS
8" — — 1 1 — — 4 4
10" — — 1 1 — — 2 2
12" — — 1 1 — — 2 2
Box Quantities Reducing Tees Concentric Reducers Eccentric Reducers
Size / Wall STD XS STD XS STD XS
3/4 x 1/2" 6-bag 6-bag — — — —
1 x 1/2" 6-bag 6-bag — — — —
1 x 3/4" 6-bag 6-bag — — — —
1 1/4 x 1/2" 6-bag 6-bag — — — —
1 1/4 x 1" 6-bag 6-bag — — — —
1 1/2 x 1/2" 6-bag 6-bag — — — —
1 1/2 x 3/4" 6-bag 6-bag — — — —
1 1/2 x 1" 6-bag 6-bag — — — —
1 1/2 x 1 1/4" 6-bag 6-bag — — — —
2 x 1" — — 12 12 12 —
2 x 1 1/4" — — 12 12 12 —
2 x 1 1/2" — — 12 12 12 —
2 1/2 x 1 1/4" — — 12 12 12 —
2 1/2 x 1 1/2" — — 12 12 12 —
2 1/2 x 2" — — 12 12 12 —
3 x 1 1/2" — — 12 12 12 —
3 x 2" — — 12 12 12 —
3 x 2 1/2" — — 12 12 12 —
4 x 2" 6 — 12 12 12 —
4 x 2 1/2" 6 — 12 12 12 —
4 x 3" 6 — 12 12 12 —
5 x 2 1/2" — — 6 6 6 —
5 x 3" 6 6 6 —
5 x 4" 6 6 6 —
6 x 3" 6 6 6 —
6 x 4" 6 6 6 —
6 x 5" 6 6 6 —
82
FLANGES
1/2" through 60"
• Class 125
• Class 150
• Class 300
• Class 600
• Class 900
• Class 1500
• Class 2500
For Ring Type Joint Facing Dimension information see page 148-153.
FLANGES
84
Common Dimensions Length Through Hub Bore Diameter Approx. Weight Pounds Drilling Template
of
Outside Thickness Diameter Diameter
Pipe Weld Weld
at Base Slip-On Slip-On Hub at of Bolt Number Diameter Diameter
Size Diameter Neck Neck Bevel Weld Neck Slip-On of Bolt of Bolt
of Hub Circle of Bolts
Holes Holes
O.D. C W Y1 Y2 B1 B2 K M
30 38.75 2.13 32.75 5.13 3.50 To be specified by 30.19 30.00 340.00 305.00 36.00 28 1 3/8 1 1/4
36 46.00 2.38 39.25 5.38 3.75 purchaser. 36.19 36.00 495.00 450.00 42.75 32 1 5/8 1 1/2
42 53.00 2.63 46.00 5.63 4.00 42.19 42.00 710.00 650.00 49.50 36 1 5/8 1 1/2
48 59.50 2.75 52.25 5.75 4.13 48.19 48.00 870.00 800.00 56.00 44 1 5/8 1 1/2
54 66.25 3.00 58.75 6.00 4.34 54.19 54.00 1100.00 1025.00 62.75 44 2 1 3/4
60 73.00 3.13 65.25 6.13 4.50 60.19 60.00 1350.00 1250.00 69.25 52 2 1 3/4
NOTES
1. Standard flange facings on page 146. 5. All weights are in pounds and approximated or estimated. Class 125 flanges are wide in face and used for connections to cast steel
2. All dimensions are in inches. ▼T here is no standard for Class 125 as it is applicable valves or equipment containing flanged ends made to Cast Iron Standard
3. For dimensional tolerances see page 144. to Cast Iron Standard ASME B16.1. These flanges correspond dimensions. Carbon steel bolting is intended and alloy studs should be
4. All flanges conform to ASTM A105/ASME SA105. to ASME B16.1 in diameter, thickness, and drilling. avoided. Class 125 flanges are identical with Class E AWWA.
FLANGES
85
FLANGES
12 19.00 1.19 1.25 14.38 12.75 2.12 2.19 4.44 2.19 12.88 12.92 12.00 0.50
14 21.00 1.31 1.38 15.75 14.00 2.19 3.12 4.94 2.25 14.14 14.18 13.25 0.50
16 23.50 1.38 1.44 18.00 16.00 2.44 3.44 4.94 2.50 16.16 16.19 15.25 0.50
18 25.00 1.50 1.56 19.88 18.00 2.62 3.81 5.44 2.69 18.18 18.20 17.25 0.50
20 27.50 1.62 1.69 22.00 20.00 2.81 4.06 5.62 2.88 20.20 20.25 19.25 0.50
24 32.00 1.81 1.88 26.12 24.00 3.19 4.38 5.94 3.25 24.25 24.25 23.25 0.50
WN BLD ASME B16.47 Series A
30 38.75 2.88 2.88 30.75 30.00 5.32
36 46.00 3.50 3.50 36.75 36.00 6.13
42 53.00 3.75 3.75 43.00 42.00 6.69
48 59.50 4.19 4.19 49.12 48.00 7.50
WN BLD ASME B16.47 Series B
30 34.94 1.69 1.94 31.00 30.06 3.88
36 41.62 2.00 2.25 37.19 36.06 4.57
42 48.25 2.25 2.65 43.38 42.12 5.19
48 54.81 2.50 3.00 49.50 48.12 5.82
NOTES
1. Standard flange facings on page 146. 6. Thread standards on page 156. * A taper shall not exceed 7 degrees on threaded, slip-on and lapped flanges.
2. All dimensions are in inches. 7. Blind flanges may be produced with or without hubs. ▲ Dimensions listed for socket weld and weld neck flanges are for Standard
3. Calculated flange weights on page 99. 8. All flanges conform to ASTM A105/ASME SA105. bore unless specified by purchaser.
4. For dimensional tolerances see page 144. 9. All flanges 1/2"-24" conform to ASME B16.5.
5. Weld end preparations on page 154. All flanges 30" and larger conform to ASME B16.47.
87
FLANGES
12 20.50 1.94 2.00 14.75 12.75 2.82 4.00 5.06 2.38 12.88 12.92 12.00 0.50 12.94
14 23.00 2.06 2.12 16.75 14.00 2.94 4.38 5.56 2.50 14.14 14.18 13.25 0.50 14.19
16 25.50 2.19 2.25 19.00 16.00 3.19 4.75 5.69 2.69 16.16 16.19 15.25 0.50 16.19
18 28.00 2.31 2.38 21.00 18.00 3.44 5.12 6.19 2.75 18.18 18.20 17.25 0.50 18.19
20 30.50 2.44 2.50 23.12 20.00 3.69 5.50 6.32 2.88 20.20 20.25 19.25 0.50 20.19
24 36.00 2.69 2.75 27.62 24.00 4.13 6.00 6.56 3.25 24.25 24.25 23.25 0.50 24.19
WN BLD ASME B16.47 Series A
30 43.00 3.57 3.69 32.56 30.00 8.19
36 50.00 4.07 4.32 39.00 36.00 9.44
42 50.75 4.63 4.63 43.25 42.00 7.82
48 57.75 5.19 5.19 49.38 48.00 8.75
WN BLD ASME B16.47 Series B
30 39.00 3.63 3.63 32.00 30.25 6.16
36 46.12 4.00 4.00 38.00 36.25 7.06
42 52.50 4.63 4.63 44.00 42.31 8.00
48 59.50 5.00 5.25 50.31 48.31 8.75
NOTES
1. Standard flange facings on page 146. 6. Thread standards on page 156. * A taper shall not exceed 7 degrees on threaded, slip-on and lapped flanges.
2. All dimensions are in inches. 7. Blind flanges may be produced with or without hubs. ▲ Dimensions listed for socket weld and weld neck flanges are for Standard
3. Calculated flange weights on page 100. 8. All flanges conform to ASTM A105/ASME SA105. bore unless specified by purchaser.
4. For dimensional tolerances see page 144. 9. All flanges 1/2"-24" conform to ASME B16.5.
5. Weld end preparations on page 154. All flanges 30" and larger conform to ASME B16.47.
89
FLANGES
12 22.00 2.62 15.75 12.75 3.62 4.62 6.12 2.75 12.88 12.92 11.75 0.50 12.94
14 23.75 2.75 17.00 14.00 3.69 5.00 6.50 2.88 14.14 14.18 13.00 0.50 14.19
16 27.00 3.00 19.50 16.00 4.19 5.50 7.00 3.06 16.16 16.19 15.00 0.50 16.19
18 29.25 3.25 21.50 18.00 4.62 6.00 7.25 3.12 18.18 18.20 17.00 0.50 18.19
20 32.00 3.50 24.00 20.00 5.00 6.50 7.50 3.25 20.20 20.25 19.00 0.50 20.19
24 37.00 4.00 28.25 24.00 5.50 7.25 8.00 3.62 24.25 24.25 23.00 0.50 24.19
WN BLD ASME B16.47 Series A
30 44.50 4.50 5.50 33.94 30.00 9.75
36 51.75 4.88 6.38 40.62 36.00 11.12
42 55.25 6.62 6.75 44.38 42.00 11.00
48 62.75 7.44 7.69 50.75 48.00 12.44
WN BLD ASME B16.47 Series B
30 40.25 4.94 5.00 31.75 30.00 8.06
36 47.75 5.75 5.94 38.12 36.00 9.56
42
48
NOTES
1. Standard flange facings on page 146. 6. Thread standards on page 156. * A taper shall not exceed 7 degrees on threaded, slip-on and lapped flanges.
2. All dimensions are in inches. 7. Blind flanges may be produced with or without hubs. ▲ Dimensions listed for socket weld and weld neck flanges are for Extra-Strong
3. Calculated flange weights on page 101. 8. All flanges conform to ASTM A105/ASME SA105. bore unless specified by purchaser.
4. For dimensional tolerances see page 144. 9. All flanges 1/2"-24" conform to ASME B16.5.
5. Weld end preparations on page 154. All flanges 30" and larger conform to ASME B16.47.
91
92
FLANGES
14 25.25 3.38 17.75 14.00 5.12 6.12 8.38 3.25 14.14 14.18 0.50 14.19
16 27.75 3.50 20.00 16.00 5.25 6.50 8.50 3.38 16.16 16.19 0.50 16.19
18 31.00 4.00 22.25 18.00 6.00 7.50 9.00 3.50 18.18 18.20 0.50 18.19
20 33.75 4.25 24.50 20.00 6.25 8.25 9.75 3.62 20.20 20.25 0.50 20.19
24 41.00 5.50 29.50 24.00 8.00 10.50 11.50 4.00 24.25 24.25 0.50 24.19
WN BLD ASME B16.47 Series A
30 48.50 5.88 7.18 35.00 30.00 12.25
36 57.50 6.75 8.44 41.88 36.00 14.25
42 61.50 8.12 9.12 46.31 42.00 14.62
48 70.25 9.19 10.38 52.88 48.00 16.50
WN BLD ASME B16.47 Series B
30 46.50 6.12 6.93 33.50 30.00 11.38
36 53.00 6.81 7.94 40.00 36.00 12.81
42
48
NOTES
1. Standard flange facings on page 146. 7. Blind flanges may be produced with or without hubs.
2. All dimensions are in inches. 8. All flanges conform to ASTM A105/ASME SA105.
3. Calculated flange weights on page 102. 9. All flanges 1/2"-24" conform to ASME B16.5.
4. For dimensional tolerances see page 144. All flanges 30" and larger conform to ASME B16.47.
5. Weld end preparations on page 154. * A taper shall not exceed 7 degrees on threaded, slip-on, and lapped flanges.
6. Thread standards on page 156.
93
94
FLANGES
14 29.50 5.25 19.50 14.00 9.50 11.75 14.18 0.50
16 32.50 5.75 21.75 16.00 10.25 12.25 16.19 0.50
18 36.00 6.38 23.50 18.00 10.88 12.88 18.20 0.50
20 38.75 7.00 25.25 20.00 11.50 14.00 20.25 0.50
24 46.00 8.00 30.00 24.00 13.00 16.00 24.25 0.50
NOTES
1. Standard flange facings on page 146. 7. Blind flanges may be produced with or without hubs.
2. All dimensions are in inches. 8. All flanges conform to ASTM A105/ASME SA105.
3. Calculated flange weights on page 103. 9. All flanges 1/2"-24" conform to ASME B16.5.
4. For dimensional tolerances see page 144. * A taper shall not exceed 7 degrees on threaded, slip-on and lapped flanges.
5. Weld end preparations on page 154.
6. Thread standards on page 156.
95
96
FLANGES
NOTES
1. Standard flange facings on page 146. 7. Blind flanges may be produced with or without hubs.
2. All dimensions are in inches. 8. All flanges conform to ASTM A105/ASME SA105.
3. Calculated flange weights on page 104. 9. All flanges 1/2"-12" conform to ASME B16.5.
4. For dimensional tolerances see page 144. * A taper shall not exceed 7 degrees on threaded, slip-on and lapped flanges.
5. Weld end preparations on page 154.
6. Thread standards on page 156.
97
Note:
Pipe Smallest Size of Reducing Outlet
Size Requiring Hub Flanges
1. The hub dimensions shall be at least as large as
1 1/2
those of the standard flanges of the size to which
1 1/4 1/2 the reduction is being made, except flanges reducing
FLANGES
1 1/2 1/2 to a size smaller than those Groups I, II and III may
Group I
2 1 be made from blind flanges.
2 1/2 1 1/4
3 1 1/4 2. Class 150 flanges do not have a counter bore.
3 1/2 1 1/2 Class 300 and higher pressure flanges will have depth
4 1 1/2 of counter bore (q) of 0.25 in. for NPS 2 and smaller
5 1 1/2 tapping and 0.38 in. for NPS 2 1/2" and larger. The
Group II diameter (Q) of counter bore is the same as that
6 2 1/2
given in the tables of threaded flanges for the
8 3 corresponding tapping.
10 3 1/2
12 3 1/2 3. Minimum length of effective threads shall be at least
14 3 1/2 equal to dimension (T) of the corresponding pressure
16 4 class threaded flange as shown in tables, but do not
Group III necessarily extend to the face of the flange. For thread
18 4
20 4 of threaded flanges, see page 158.
24 4
98
CLASS 150
Outside
Pipe Diameter Threaded Weld Neck Blind Lap Joint
Size & Slip-on
O.D.
ASME B16.5
1/2 3.50 2.00 2.00 2.00 1.00
3/4 3.88 2.00 2.00 2.00 2.00
1 4.25 2.00 3.00 2.00 2.00
1 1/4 4.62 3.00 3.00 3.00 3.00
1 1/2 5.00 3.00 4.00 4.00 3.00
2 6.00 5.00 6.00 5.00 5.00
2 1/2 7.00 8.00 10.00 7.00 8.00
3 7.50 9.00 11.50 9.00 9.00
3 1/2 8.50 12.00 12.00 13.00 11.00
4 9.00 13.00 16.50 17.00 13.00
5 10.00 15.00 21.00 20.00 15.00
6 11.00 19.00 26.00 27.00 19.00
8 13.50 30.00 42.00 47.00 30.00
10 16.00 43.00 54.00 70.00 43.00
12 19.00 64.00 88.00 123.00 64.00
14 21.00 90.00 114.00 140.00 105.00
16 23.50 106.00 140.00 180.00 140.00
18 25.00 130.00 165.00 220.00 160.00
20 27.50 165.00 197.00 285.00 195.00
24 32.00 220.00 268.00 430.00 275.00
ASME B16.47 Series A
FLANGES
30 38.75 — 400.00 982.00 —
36 46.00 — 640.00 1676.00 —
42 53.00 — 890.00 2381.00 —
48 59.50 — 1185.00 3348.00 —
ASME B16.47 Series B
30 34.94 — 150.00 543.00 —
36 41.62 — 240.00 890.00 —
42 48.25 — 345.00 1393.00 —
48 54.81 — 480.00 2045.00 —
NOTES
1. All dimensions are in inches.
2. All weights are in pounds and approximated or estimated.
99
CLASS 300
Outside
Pipe Diameter Threaded Weld Neck Blind Lap Joint
Size & Slip-on
O.D.
ASME B16.5
1/2 3.75 3.00 2.00 2.00 2.00
3/4 4.62 3.00 3.00 3.00 3.00
1 4.88 3.00 4.00 4.00 3.00
1 1/4 5.25 4.50 5.00 6.00 4.50
1 1/2 6.12 6.50 7.00 7.00 6.50
2 6.50 7.00 9.00 8.00 7.00
2 1/2 7.50 10.00 12.00 12.00 10.00
3 8.25 14.00 18.00 16.00 14.00
3 1/2 9.00 17.00 20.00 21.00 17.00
4 10.00 24.00 26.50 28.00 24.00
5 11.00 31.00 36.00 37.00 28.00
6 12.50 39.00 45.00 50.00 39.00
8 15.00 58.00 69.00 81.00 58.00
10 17.50 81.00 100.00 124.00 91.00
12 20.50 115.00 142.00 185.00 140.00
14 23.00 165.00 206.00 250.00 190.00
16 25.50 220.00 250.00 315.00 234.00
18 28.00 280.00 320.00 415.00 305.00
20 30.50 325.00 400.00 515.00 375.00
24 36.00 490.00 580.00 800.00 550.00
ASME B16.47 Series A
FLANGES
100
CLASS 600
Outside
Pipe Diameter Threaded Weld Neck Blind Lap Joint
Size & Slip-on
O.D.
ASME B16.5
1/2 3.75 2.00 3.00 3.00 2.00
3/4 4.62 3.00 4.00 4.00 3.00
1 4.88 4.00 4.00 4.00 4.00
1 1/4 5.25 5.00 6.00 6.00 5.00
1 1/2 6.12 7.00 8.00 8.00 7.00
2 6.50 9.00 12.00 10.00 9.00
2 1/2 7.50 13.00 18.00 15.00 12.00
3 8.25 16.00 23.00 20.00 15.00
3 1/2 9.00 21.00 26.00 29.00 20.00
4 10.75 37.00 42.00 41.00 36.00
5 13.00 63.00 68.00 68.00 63.00
6 14.00 80.00 81.00 86.00 78.00
8 16.50 115.00 120.00 140.00 112.00
10 20.00 177.00 190.00 231.00 195.00
12 22.00 215.00 226.00 295.00 240.00
14 23.75 259.00 347.00 378.00 290.00
16 27.00 366.00 481.00 527.00 400.00
18 29.25 476.00 555.00 665.00 469.00
20 32.00 612.00 690.00 855.00 604.00
24 37.00 876.00 977.00 1250.00 866.00
ASME B16.47 Series A
FLANGES
30 44.50 — 1210.00 2423.00 —
36 51.75 — 1705.00 3802.00 —
42 55.25 — 2030.00 4585.00 —
48 62.75 — 2855.00 6737.00 —
ASME B16.47 Series B
30 40.25 — 810.00 1802.00 —
36 47.75 — 1340.00 3013.00 —
NOTES
1. All dimensions are in inches.
2. All weights are in pounds and approximated or estimated.
101
CLASS 900
Outside
Pipe Diameter Threaded Weld Neck Blind Lap Joint
Size & Slip-on
O.D.
ASME B16.5
1/2 4.75 6.00 7.00 4.00 6.00
3/4 5.12 6.00 7.00 6.00 6.00
1 5.88 7.50 8.50 9.00 7.50
1 1/4 6.25 10.00 10.00 10.00 10.00
1 1/2 7.00 14.00 14.00 14.00 14.00
2 8.50 22.00 24.00 25.00 21.00
2 1/2 9.62 31.00 31.00 32.00 25.00
3 9.50 36.00 36.00 35.00 29.00
4 11.50 53.00 53.00 54.00 51.00
5 13.75 83.00 86.00 87.00 81.00
6 15.00 110.00 110.00 115.00 105.00
8 18.50 172.00 187.00 200.00 190.00
10 21.50 245.00 268.00 290.00 277.00
12 24.00 326.00 372.00 415.00 371.00
14 25.25 400.00 562.00 520.00 415.00
16 27.75 459.00 685.00 619.00 488.00
18 31.00 647.00 924.00 880.00 670.00
20 33.75 792.00 1164.00 1107.00 868.00
24 41.00 1480.00 2107.00 2099.00 1659.00
ASME B16.47 Series A
30 48.50 — 2120.00 3758.00 —
FLANGES
102
CLASS 1500
Outside
Pipe Diameter Threaded Weld Neck Blind Lap Joint
Size & Slip-on
O.D.
ASME B16.5
1/2 4.75 6.00 7.00 4.00 6.00
3/4 5.12 6.00 7.00 6.00 6.00
1 5.88 8.00 9.00 9.00 8.00
1 1/4 6.25 10.00 10.00 10.00 10.00
1 1/2 7.00 14.00 14.00 14.00 14.00
2 8.50 25.00 25.00 25.00 25.00
2 1/2 9.62 36.00 36.00 35.00 35.00
3 10.50 48.00 48.00 48.00 47.00
4 12.25 73.00 73.00 73.00 75.00
5 14.75 132.00 132.00 140.00 140.00
6 15.50 165.00 165.00 160.00 170.00
8 19.00 260.00 275.00 302.00 286.00
10 23.00 436.00 455.00 510.00 485.00
12 26.50 667.00 690.00 775.00 749.00
14 29.50 940.00 940.00 975.00 890.00
16 32.50 1250.00 1250.00 1300.00 1250.00
18 36.00 1625.00 1625.00 1750.00 1475.00
20 38.75 2050.00 2050.00 2225.00 1775.00
24 46.00 2825.00 3325.00 3625.00 2825.00
NOTES
1. All dimensions are in inches.
FLANGES
2. All weights are in pounds and approximated or estimated.
103
CLASS 2500
Outside
Pipe Diameter Threaded Weld Neck Blind Lap Joint
Size & Slip-on
O.D.
ASME B16.5
1/2 5.25 7.00 8.00 7.00 7.00
3/4 5.50 9.00 9.00 10.00 8.00
1 6.25 12.00 13.00 12.00 12.00
1 1/4 7.25 18.00 20.00 18.00 17.00
1 1/2 8.00 25.00 28.00 25.00 24.00
2 9.25 38.00 42.00 39.00 37.00
2 1/2 10.50 55.00 52.00 56.00 53.00
3 12.00 83.00 94.00 86.00 80.00
4 14.00 127.00 146.00 133.00 122.00
5 16.50 210.00 244.00 223.00 204.00
6 19.00 323.00 378.00 345.00 314.00
8 21.75 485.00 576.00 533.00 471.00
10 26.50 925.00 1068.00 1025.00 897.00
12 30.00 1300.00 1608.00 1464.00 1262.00
NOTES
1. All dimensions are in inches.
2. All weights are in pounds and approximated or estimated.
FLANGES
104
BOX QUANTITIES
SLIP-ON, THREADED, LAP JOINT, SOCKET WELD (STD & XS), BLINDS
Box
Quantities Class 150 Class 300 Class 600 Class 900 Class 1500 Class 2500
Nominal (Raised & Flat Face) (Raised & Flat Face) (Raised & Flat Face) (Raised & Flat Face) (Raised & Flat Face) (Raised & Flat Face)
Pipe Size
1/2" 12 6 6 — — —
3/4" 12 6 6 — — —
1" 12 6 6 — — —
1 1/4" 12 6 6 — — —
1 1/2" 12 6 6 — — —
BOX QUANTITIES
WELD-NECK (STD & XS)
Box
Quantities Class 150 Class 300 Class 600 Class 900 Class 1500 Class 2500
Nominal (Raised & Flat Face) (Raised & Flat Face) (Raised & Flat Face) (Raised & Flat Face) (Raised & Flat Face) (Raised & Flat Face)
Pipe Size
1/2" 12 6 6 — — —
3/4" 12 6 6 — — —
1" 12 6 6 — — —
1 1/4" 12 6 6 — — —
1 1/2" 12 6 6 — — —
BUNDLE QUANTITIES
SLIP-ON, THREADED, LAP JOINT, SOCKET WELD (STD & XS)
Bundle
Quantities Class 150 Class 300 Class 600 Class 900 Class 1500 Class 2500
Nominal (Raised & Flat Face) (Raised & Flat Face) (Raised & Flat Face) (Raised & Flat Face) (Raised & Flat Face) (Raised & Flat Face)
Pipe Size
2" 20 16 — — — —
2 1/2" 18 14 — — — —
FLANGES
3" 17 12 — — — —
3 1/2" 15 — — — — —
4" 15 11 — — — —
5" 14 11 — — — —
6" 13 10 — — — —
8" 12 8 — — — —
10" 11 — — — — —
12" 9 — — — — —
BUNDLE QUANTITIES
WELD-NECK (STD & XS)
Bundle
Quantities Class 150 Class 300 Class 600 Class 900 Class 1500 Class 2500
Nominal (Raised & Flat Face) (Raised & Flat Face) (Raised & Flat Face) (Raised & Flat Face) (Raised & Flat Face) (Raised & Flat Face)
Pipe Size
2" 9 8 — — — —
2 1/2" 8 8 — — — —
3" 8 8 — — — —
3 1/2" 8 8 — — — —
4" 8 7 — — — —
5" 7 6 — — — —
6" 7 6 — — — —
8" 6 5 — — — —
10" 6 — — — — —
105
12" — — — — — —
Copyright © 2010 by Weldbend Corporation. All Rights Reserved.
TECHNICAL DATA INDEX
PAGE
106
PLAIN BEVEL
Figure 1
37 ½° ± 2 ½°
Note
(1)
0.88" max.
D
COMPOUND BEVEL
Figure 2
Note
(1) 10° ± 2 ½°
Rad.
0.88"
D
37 ½° ± 2 ½°
0.75"
Note:
1. See ASME B16.9 for transition contours.
2. x = 0.19" for carbon steel or ferritic alloy steel and 0.12" for austenitic alloy steel. 107
90° Reducers
3R 90° and and Lap
and
Weldbend Fittings 45° Joint Caps 180° Return Bends Stub Ends
3R 45° Elbows Stub
Elbows and Tees Ends
Outside
Outside Inside Center Center Overall Overall Center Back Thickness Radius
Pipe Diameter Diameter to End to End Length Length to Center to Face Alignment Diameter of Lap of Lap
of Ends of Lap
Size
O.D. I.D. C, A C, A, B, R L, J H V W K T N
+0.06, + 0, + 0, + 0.06,
1/2 to 2 1/2 0.03 0.09 0.06 0.06 0.12 0.25 0.25 0.03
– 0.03 – 0.03 – 0.03 –0
+ 0, + 0, + 0.06,
3 to 3 1/2 0.06 0.06 0.09 0.06 0.06 0.12 0.25 0.25 0.03
– 0.03 – 0.06 –0
+ 0, + 0, + 0.06,
4 0.06 0.06 0.09 0.06 0.06 0.12 0.25 0.25 0.03
– 0.03 – 0.06 –0
+0.09, + 0, + 0, + 0.06,
5 to 8 0.06 0.09 0.06 0.06 0.25 0.25 0.25 0.03
– 0.06 – 0.03 – 0.06 –0
+0.16, + 0, + 0, + 0.12,
10 to 18 0.12 0.12 0.09 0.09 0.25 0.38 0.25 0.06
– 0.12 – 0.06 – 0.06 –0
+0.25, + 0, + 0, + 0.12,
20 to 24 0.19 0.12 0.09 0.09 0.25 0.38 0.25 0.06
– 0.19 – 0.06 – 0.06 –0
+0.25,
26 to 30 0.19 0.25 0.12 0.19 0.38
– 0.19
+0.25,
30 to 48 0.19 0.38 0.19 0.19 0.38
– 0.19
NOTES
1. All dimensions are in inches.
2. Tolerances are equal plus and minus unless indicated.
3. The inside diameter and nominal wall thickness at ends
are to be specified by purchaser.
4. Please refer to ASME B16.9 for further information
regarding tolerances.
5. Minimum wall thickness of 87.5% applies.
6. The out-of-round is the sum of the absolute values of
the plus and minus tolerances.
18 – 24 0.12 0.38
26 – 30 0.19 0.38
32 – 42 0.19 0.50
44 – 48 0.19 0.75
108
Wall Thickness
Pipe Working Pressure – Lbs per Square Inch at the Fahrenheit Temperature Indicated**
Inches*
Size
T -20° to 650° 700° 750° 800°***
1/2 0.109 4989 4551 3793 3151
3/4 0.113 4065 3709 3091 2568
1 0.133 3800 3467 2889 2400
1 1/4 0.140 3124 2850 2375 1973
1 1/2 0.145 2806 2560 2134 1773
2 0.154 2360 2153 1794 1491
2 1/2 0.203 2583 2357 1964 1632
3 0.216 2240 2043 1703 1415
3 1/2 0.226 2041 1862 1551 1289
4 0.237 1895 1729 1441 1197
5 0.258 1659 1514 1261 1048
6 0.280 1506 1374 1145 951
8 0.322 1324 1208 1007 836
10 0.365 1201 1095 913 758
12 0.375 1035 945 787 654
14 0.375 941 858 715 594
16 0.375 820 748 624 518
18 0.375 727 664 553 459
20 0.375 653 596 497 413
24 0.375 543 495 413 343
30 0.375 433 395 329 273
36 0.375 360 328 274 227
42 0.375 308 281 234 195
48 0.375 269 246 205 170
Please review B31.1 for formula information.
NOTES
1. All dimensions are in inches.
2. All values listed in table above to be considered as a guide only.
Please refer to B31.1 for formula and other factors that could
effect the determination of pressure ratings.
* Nominal wall thickness; they correspond respectively to the
thickness of Schedule STANDARD WALL GRADE B steel pipe.
TECHNICAL DATA
109
Wall Thickness
Pipe Working Pressure – Lbs per Square Inch at the Fahrenheit Temperature Indicated**
Inches*
Size
T -20° to 650° 700° 750° 800°***
1/2 0.147 6942 6333 5278 4385
3/4 0.154 5709 5209 4341 3606
1 0.179 5258 4797 3998 3321
1 1/4 0.191 4373 3989 3324 2762
1 1/2 0.200 3969 3620 3017 2506
2 0.218 3422 3121 2601 2161
2 1/2 0.276 3591 3276 2730 2268
3 0.300 3178 2900 2416 2007
3 1/2 0.318 2932 2675 2229 1852
4 0.337 2751 2509 2091 1737
5 0.375 2459 2243 1870 1553
6 0.432 2374 2166 1805 1499
8 0.500 2097 1913 1594 1324
10 0.500 1664 1518 1265 1051
12 0.500 1394 1271 1059 880
14 0.500 1265 1154 962 799
16 0.500 1102 1005 838 696
18 0.500 976 891 742 617
20 0.500 876 799 666 553
24 0.500 727 664 553 459
30 0.500 579 529 441 366
36 0.500 482 439 366 304
42 0.500 412 376 313 260
48 0.500 360 328 274 227
Please review B31.1 for formula information.
NOTES
1. All dimensions are in inches.
2. All values listed in table above to be considered as a guide only.
Please refer to B31.1 for formula and other factors that could
effect the determination of pressure ratings.
* Nominal wall thickness; they correspond respectively to the
thickness of Schedule EXTRA-STRONG WALL GRADE B steel pipe.
TECHNICAL DATA
110
Wall Thickness
Pipe Working Pressure – Lbs per Square Inch at the Fahrenheit Temperature Indicated**
Inches*
Size
T -20° to 650° 700° 750° 800°***
FOR DIMENSION SPECIFICATIONS
1/2" THROUGH 10" REFER TO SCHEDULE STD
12 0.406 1124 1025 854 710
14 0.438 1103 1007 839 697
16 0.500 1102 1005 838 696
18 0.562 1101 1004 837 695
20 0.594 1046 954 795 661
24 0.688 1008 920 767 637
Wall Thickness
Pipe Working Pressure – Lbs per Square Inch at the Fahrenheit Temperature Indicated**
Inches*
Size
T -20° to 650° 700° 750° 800°***
FOR DIMENSION SPECIFICATIONS
1/2" THROUGH 8" REFER TO SCHEDULE XS
10 0.594 1993 1819 1515 1259
12 0.688 1944 1774 1478 1228
14 0.750 1930 1760 1467 1219
16 0.844 1899 1732 1443 1199
18 0.938 1875 1710 1425 1184
20 1.031 1853 1691 1409 1171
24 1.219 1825 1665 1387 1153
Please review B31.1 for formula information.
NOTES
1. All dimensions are in inches.
2. All values listed in table above to be considered as a guide only.
Please refer to B31.1 for formula and other factors that could
effect the determination of pressure ratings.
TECHNICAL DATA
111
Wall Thickness
Pipe Working Pressure – Lbs per Square Inch at the Fahrenheit Temperature Indicated**
Inches*
Size
T -20° to 650° 700° 750° 800°***
1/2 0.188 9104 8306 6921 5750
3/4 0.219 8428 7688 6407 5323
1 0.250 7609 6941 5785 4806
1 1/4 0.250 5879 5363 4469 3713
1 1/2 0.281 5762 5257 4381 3639
2 0.344 5631 5137 4281 3556
2 1/2 0.375 5017 4577 3814 3169
3 0.438 4794 4373 3645 3028
4 0.531 4495 4101 3417 2839
5 0.625 4260 3887 3239 2691
6 0.719 4103 3743 3119 2591
8 0.906 3960 3612 3010 2501
10 1.125 3944 3598 2998 2491
12 1.312 3872 3532 2944 2445
14 1.406 3771 3440 2867 2382
16 1.594 3738 3410 2842 2361
18 1.781 3711 3385 2821 2344
20 1.969 3691 3367 2806 2331
24 2.344 3659 3338 2782 2311
Please review B31.1 for formula information.
NOTES
1. All dimensions are in inches.
2. All values listed in table above to be considered as a guide only.
Please refer to B31.1 for formula and other factors that could
effect the determination of pressure ratings.
* Nominal wall thickness; they correspond respectively to the
thickness of SCHEDULE 160 WALL GRADE B steel pipe.
** Ratings apply in accordance with Sections 1 and 5 of the Code
for Pressure Pipe. The values shown are based upon a corrosion
allowance of 0 inches.
*** Upon prolonged exposure to temperatures about 775° the
carbide phase of carbon steel may be converted to graphite.
For other applications refer to appropriate section of B31 Code
for Pressure Piping.
TECHNICAL DATA
112
Wall Thickness
Pipe Working Pressure – Lbs per Square Inch at the Fahrenheit Temperature Indicated**
Inches*
Size
T -20° to 650° 700° 750° 800°***
1/2 0.294 14276 13024 10853 9017
3/4 0.308 12110 11047 9206 7648
1 0.358 11223 10239 8532 7088
1 1/4 0.382 9384 8561 7134 5927
1 1/2 0.400 8515 7768 6473 5378
2 0.436 7320 6678 5565 4623
2 1/2 0.552 7692 7018 5848 4858
3 0.600 6785 6190 5158 4286
4 0.674 5843 5331 4442 3691
5 0.750 5203 4747 3955 3286
6 0.864 5016 4576 3814 3168
8 0.875 3813 3478 2899 2408
10 1.000 3471 3167 2639 2192
12 1.000 2890 2636 2197 1825
Please review B31.1 for formula information.
NOTES
1. All dimensions are in inches.
2. All values listed in table above to be considered as a guide only.
Please refer to B31.1 for formula and other factors that could
effect the determination of pressure ratings.
* Nominal wall thickness; they correspond respectively to the
thickness of SCHEDULE Double Extra-Strong WALL GRADE B steel pipe.
** Ratings apply in accordance with Sections 1 and 5 of the Code
for Pressure Pipe. The values shown are based upon a corrosion
allowance of 0 inches.
*** Upon prolonged exposure to temperatures about 775° the
carbide phase of carbon steel may be converted to graphite.
For other applications refer to appropriate section of B31 Code
for Pressure Piping.
TECHNICAL DATA
113
114 WPB
Copyright © 2010 by Weldbend Corporation. All Rights Reserved.
TEL: 708/594-1700
FAX: 708/458-0106
www.weldbend.com buttweld fittings pressure ratings
Based on the Code for Pressure Piping B31.8
SCHEDULE XS
For reference only
WPB
Copyright © 2010 by Weldbend Corporation. All Rights Reserved.
115
buttweld fittings pressure ratings
Based on the Code for Pressure Piping B31.8
SCHEDULE 40
For reference only
WPB
3. A joint sufficiency factor of 1.00 is assumed.
4. Ratings are for a temperature of 250°F or less.
116
WPB
Copyright © 2010 by Weldbend Corporation. All Rights Reserved.
117
buttweld fittings pressure ratings
Based on Code For Pressure Piping B31.8
SCHEDULE XXS
For reference only
118 WPB
Copyright © 2010 by Weldbend Corporation. All Rights Reserved.
TEL: 708/594-1700
FAX: 708/458-0106
www.weldbend.com buttweld fittings pressure ratings
Based on Code For Pressure Piping B31.8
SCHEDULE STD WPHY-52
For reference only
WPHY-52
3. A joint sufficiency factor of 1.00 is assumed.
4. Ratings are for a temperature of 250°F or less.
121
TECHNICAL DATA
WPHY-65
3. A joint sufficiency factor of 1.00 is assumed.
4. Ratings are for a temperature of 250°F or less.
126
TECHNICAL DATA
The information given in the chart above illustrates the resistance of fittings to the flow of liquids.
This resistance is given in the equivalent of the straight pipe, and should be assumed as approximate information.
Allowances have been made up for the curvature of elbows, so that the resistance values should be added to the total
center-to-end dimensions of the piping configuration.
As an example: Using 6" pipe: Resistance of Pipe: (6.6 + 6.4 + 6.6) = 19.6
+ Resistance of Elbow: = 6.1
Resistance of Tee: = 23.0
= 48.7
Therefore, the total resistance of the entire assembly to the flow of liquid would be equal to the resistance of 48.7 Linear feet
of 6" straight pipe. 129
In order to determine the friction factor, f, for use with this formula, it is necessary to first calculate
the appropriate Reynolds number, R, and then to select it from the graph below.
R = 124dvþ
µ
Values for þ and µ for different liquids and gases are available in various engineering handbooks.
As an example, if water at 70ºF is flowing through the 6" assembly of the previous page at an average
velocity of 20 ft/sec. the pressure drop due to flow friction (only) may be calculated as follows:
.04
TECHNICAL DATA
ƒ .03
½" IPS
.02
1" IPS
2 ½" IPS
6" IPS
R E Y NOL D S NUMBE R - R
130
Stress Intensification
Factor [Notes 2, 3]
Flexibility Flexibility
Description Factor Out-plane In-plane Characteristic Sketch
k io ii h
T
Welding elbow T R1
1.65 0.75 0.9 r2
or pipe bend
h h 2/3 h 2/3 r 2
[Notes 1, 2] 2 R1= bend
radius
Stress
Flexibility Intensification
Description Factor Factor
k i
Butt welded joint, reducer, or weld neck flange 1 1.0
Double-welded slip-on flange 1 1.2
Lap joint flange (with ASME B16.9 lap joint stub) 1 1.6
Threaded pipe joint, or threaded flange 1 2.3
1.00
1 END FLANGED C1 = h1/6
0.75
CORR
FACTOR 0.50
C1 2 ENDS FLANGED C1 = h1/3
0.375
TECHNICAL DATA
0.25
0.0 0.03 0.04 0.06 0.10 0.15 0.2 0.3 0.4 0.6 0.8 1.0 1.5 2.0
NOTES
1. The flexibility factor, k, applies to bending in any plane. The flexibility factor k, and stress intensification factor, i, shall not be less than unity.
2. T = Nominal wall thickness of elbows. R1 = Bend radius of elbows.
T = Nominal wall thickness of matching pipe of tees. rx = See definition in appropriate section of B31.
Tc = Crotch thickness of tees. Db = Outside diameter of branch.
r2 = Mean radius of matching pipe.
3. When radius and thickness limits are not met for this component, use h = T/r2.
4. Where flanges are attached to one or both ends, the values of k and i shall be corrected by the factors C1 from graph above.
131
132
133
134
SCHEDULE 80
For reference only
135
136
TECHNICAL DATA
137
138
139
140
141
24 24.000
60 0.969 22.062 238.57 165.603 6.283 5.776
80 1.219 21.562 296.86 158.182 6.283 5.645
100 1.531 20.938 367.74 149.159 6.283 5.482
120 1.812 20.376 429.79 141.259 6.283 5.334
140 2.062 19.876 483.57 134.411 6.283 5.204
160 2.344 19.312 542.67 126.892 6.283 5.056
142
TECHNICAL DATA
143
144
Flanges, welding necks, and other products designed for bolted connection,
when furnished with raised face (or flat faced) may have any type of gasket
surface finished that is required. The common finishes are described in
the following paragraphs and it should be noted particularly that, unless
otherwise specified by the purchaser, the STOCK FINISH will be furnished.
From 125 micro inches to 250 micro inches average roughness shall be furnished. The
cutting tool employed should have an approximate 0.06 inches or larger radius.
Smooth Finish
This finish, which can be produced by several shapes of tools, shows no definite tool
markings apparent to the naked eye. In the past this finish was sometimes known as
“Smooth Plane”. This term, however, should be avoided because of a tendency to
confuse it with “flat faced” which, of course, applies to the flange facing and not
to the gasket surface finish.
Producing by using a wide tool at high speeds, this finish is equivalent to that of
a ground surface. It is mirror-like in appearance and surfaces finished in this manner
are usually expected to be used without gaskets.
Spiral Serrated
This too, is a continuous spiral groove, but it differs from the stock finish in that the groove
is generated with a 90° included angle “V” tool. This groove is 1/64" deep and the feed is
1/32" for all sizes.
Concentric Serrated
TECHNICAL DATA
As the name suggests this surface finish is made up of concentric grooves. A 90° included
angle “V” tool is used and the grooves are 1/64" deep and 1/32" apart.
145
1/4"
FLAT FACE 1/4" RAISED FACE
Optional Class 400 – 2500
(All Classes)
1/16"
1/16" RAISED FACE
Class 150 & 300
TECHNICAL DATA
146
147
148
1. All dimensions are in inches. 4. For ring joints with lapped flanges in Class 300 and 600,
2. Height of raised portion is equal to the depth of grove ring and groove number R30 are used instead of R31.
dimension E, but is not subjected to the tolerances for E.
Former full-face contour may be used.
3. Tolerances:
E (depth) + 0.016, - 0.0
F (width) ± 0.008
P (pitch diameter) ± 0.005
R (radius at bottom)
R < 0.06 + 0.03, - 0.0;
R > 0.06 ± 0.03
23° (angle) = ½°
149
NOTES
1. All dimensions are in inches. 4. For ring joints with lapped flanges in Class 300 and 600,
2. Height of raised portion is equal to the depth of grove ring and groove number R30 are used instead of R31.
dimension E, but is not subjected to the tolerances for E.
Former full-face contour may be used.
3. Tolerances:
E (depth) + 0.016, - 0.0
F (width) ± 0.008
P (pitch diameter) ± 0.005
R (radius at bottom)
R < 0.06 + 0.03, - 0.0;
R > 0.06 ± 0.03
23° (angle) = ½°
150
151
152
153
Bevel for Wall Thicknesses (T) Bevel for Wall Thicknesses (T)
from 0.19 in. to 0.88 in. Inclusive Greater Than 0.88 in.
¼"
¼" min.
min.
1:3 max. slope
1:3 max. slope
37 ½° 10° ± 2 ½°
± 2 ½°
45° max. 0.12 min. radius 45° max.
37 ½° ± 2 ½°
T
T ¾"
0.06" ± 0.03"
O.D. O.D. 0.06" ± 0.03"
X X
I.D. I.D.
NOTES
1. All dimensions are in inches.
2. When the thickness of the hub at the bevel is greater than that of the pipe
to which the flange is joined and the additional thickness is provided on the
outside diameter, a taper weld having a slope not exceeding 1 to 3 may be
employed or, alternatively, the greater outside diameter may be tapered at the
same maximum slope or less, from a point on the welding bevel equal to the
outside diameter of the mating pipe. Similarly, when the greater thickness is
provided on the inside of the flange, it shall be taper-bored from the welding
end at the slope not exceeding 1 to 3. When flanges covered by this Standard
are intended for services with light wall, higher strength pipe, the thickness of
the hub at the bevel may be greater than that of the pipe to which the flange is
TECHNICAL DATA
joined. Under these conditions, a single taper hub may be provided, and the
outside diameter of the hub at the base (dimension X) may also be modified.
The additional thickness may be provided on either inside or outside or partially
on each side, but the total additional thickness shall not exceed one-half times
the nominal wall thickness of intended mating pipe. See page 155.
3. The hub transition from the outside diameter to the X diameter shall fall within the
maximum and minimum envelope outlined by the 1:3 max. slope and the
dashed line.
4. For welding end dimensions, refer to ASME B16.25.
154
T1 T2
3/32" MAX.
T1
T2
1/2 T1 MAX.
T1
T2
1/2 T1 MAX.
NOTES
1. Buttwelding fittings can be joined to pipe of lesser wall thickness with proper end
preparation and joint design.
2. Above diagrams and recommendations that follow apply to components with ends
originally prepared as standard 37 ½º or 30º degree bevels and where the wall thickness
of the thicker end to be joined does not exceed 1 ½ times the thinner (pipe) end.
3. T he nominal thickness T1 (pipe) and T2 (fitting) shall comply with the design requirements
of the applicable section of the ASME B31 Code For Pressure Piping.
4. Where the total nominal offset (T2-T1) does not exceed 3/32" and full penetration and
bonding is obtained during welding, no special treatment is required [see (A)].
5. When the internal offset exceeds 3/32", taper cut in accordance with (B) ...or taper
weld in accordance with (C).
TECHNICAL DATA
6. When joining ends with materials of unequal minimum specified yield strengths
(or unequal allowable stress), the deposited weld metal shall have mechanical properties
at least equal to those of the higher strength (pipe) end.
7. For treatments of ends with unequal external diameters and/or where T2 is thicker than
1 1/2 times T1, refer to the applicable section of the ASME Code, e., B31.4 or B31.8 or B16.9.
155
12 12.750 8.0 0.12500 12.53281 1.360 10.88 12.61781 2.1250 17.00 12.66562 0.7650 6.12
14 14.000 8.0 0.12500 13.77500 1.562 12.50 13.87262 2.2500 18.00 13.91562 0.6880 5.50
16 16.000 8.0 0.12500 15.76250 1.812 14.50 15.87575 2.4500 19.60 15.91562 0.6380 5.10
18 18.000 8.0 0.12500 17.75000 2.000 16.00 17.8750 2.6500 21.20 17.91562 0.6500 5.20
20 20.000 8.0 0.12500 19.73750 2.125 17.00 19.87031 2.8500 22.80 19.91562 0.7250 5.80
24 24.000 8.0 0.12500 23.71250 2.375 19.00 23.86094 3.2500 26.00 23.91562 0.8750 7.00
156
Wrench Makeup
Length for Internal Thread 7 Vanish Nominal
Overall8 Complete Basic Minor
Thread Length Height of Increase in Diameter
Length (L3) External Threads
External Thread Diameter at Small End Pipe
Diameter Thread Thread of Pipe Size
Inch Thread Inch Thread Length Diameter (0.0625/n)
L3 L3 E3 V V L4 L5 E5 h K0
0.1111 3 0.26424 0.1285 3.47 0.3896 0.1870 0.28287 0.02963 0.00231 0.2416 1/16
0.1111 3 0.35656 0.1285 3.47 0.3924 0.1898 0.37537 0.02963 0.00231 0.3339 1/8
0.1667 3 0.46697 0.1928 3.47 0.5946 0.2907 0.49556 0.04444 0.00347 0.4329 1/4
0.1667 3 0.60160 0.1928 3.47 0.6006 0.2967 0.63056 0.04444 0.00347 0.5676 3/8
0.2143 3 0.74504 0.2478 3.47 0.7815 0.3909 0.78286 0.05714 0.00446 0.7013 1/2
0.2143 3 0.95429 0.2478 3.47 0.7935 0.4029 0.99286 0.05714 0.00446 0.9105 3/4
0.2609 3 1.19733 0.3017 3.47 0.9845 0.5089 1.24543 0.06957 0.00543 1.1441 1
0.2609 3 1.54083 0.3017 3.47 1.0085 0.5329 1.59043 0.06957 0.00543 1.4876 1 1/4
0.2609 3 1.77978 0.3017 3.47 1.0252 0.5496 1.83043 0.06957 0.00543 1.7265 1 1/2
0.2609 3 2.25272 0.3017 3.47 1.0582 0.5826 2.30543 0.06957 0.00543 2.1995 2
0.2500 2 2.70391 0.4337 3.47 1.5712 0.8875 2.77500 0.10000 0.00781 2.6195 2 1/2
0.2500 2 3.32500 0.4337 3.47 1.6337 0.9500 3.40000 0.10000 0.00781 3.2406 3
0.2500 2 3.82188 0.4337 3.47 1.6837 1.0000 3.90000 0.10000 0.00781 3.7375 3 1/2
0.2500 2 4.31875 0.4337 3.47 1.7337 1.0500 4.40000 0.10000 0.00781 4.2344 4
0.2500 2 5.37511 0.4337 3.47 1.8400 1.1563 5.46300 0.10000 0.00781 5.2907 5
0.2500 2 6.43047 0.4337 3.47 1.9462 1.2625 6.52500 0.10000 0.00781 6.3461 6
0.2500 2 8.41797 0.4337 3.47 2.1462 1.4625 8.52500 0.10000 0.00781 8.3336 8
0.2500 2 10.52969 0.4337 3.47 2.3587 1.6750 10.65000 0.10000 0.00781 10.4453 10
TECHNICAL DATA
0.2500 2 12.51719 0.4337 3.47 2.5587 1.8750 12.65000 0.10000 0.00781 12.4328 12
0.2500 2 13.75938 0.4337 3.47 2.6837 2.0000 13.90000 0.10000 0.00781 13.6750 14
0.2500 2 15.74688 0.4337 3.47 2.8837 2.2000 15.90000 0.10000 0.00781 15.6625 16
0.2500 2 17.73438 0.4337 3.47 3.0837 2.4000 17.90000 0.10000 0.00781 17.6500 18
0.2500 2 19.72188 0.4337 3.47 3.2837 2.6000 19.90000 0.10000 0.00781 19.6375 20
0.2500 2 23.69688 0.4337 3.47 3.6837 3.0000 23.90000 0.10000 0.00781 23.6125 24
157
CLASS 150 STANDARD WITH 1/16" RAISED FACE CLASS 300 – 2500 STANDARD WITH 1/16" RAISED FACE
158
Where:
A = 2(C + t +d) + G + F - a, (i.e. stud-bolt length LSSB = Specified stud-bolt length (effective thread
exclusive of negative tolerance n). length, excluding end points) which is LCSB
rounded off to the next larger 0.25 in.
B = 2(C + t) + d + G + F + p - a, (i.e. machine bolt increment; see Figure 1.
length exclusive of negative length tolerance n).
a = Zero, except where the small female face is
C = Minimum flange thickness. on the end of pipe, a = 0.19 in.
F = Total height of facings or depth of ring-joint d = Heavy nut thickness (equals nominal bolt
groove for both flanges, see "F" Values on diameter, see ASME B18.2.2).
page 160.
n = Negative tolerance on bolt length.
G = 0.12 in. (3.2 mm) gasket thickness for
raised face, M & F and T & G flanges; p = Allowance for height of point of machine bolt
also approximate distance between (= 1.5 times thread pitch).
ring-joint flanges.
t = Plus tolerance for flange thickness.
LCMB = Calculated machine bolt length as measured
from underside of head to end of point.
NOTES
1. For lapped joints calculate stud-bolt and machine bolt lengths as follows:
159
“n” VALUES
Length Negative Tolerance on Bolt Lengths “n”
Stud Bolt A
or 0.06 in., for lengths up to 12 in. incl.
[A+(pipe thickness for each lap)] 0.12 in., for lengths over 12 in. to 18 in. incl.
or 0.25 in., for lengths over 18 in. incl.
[A-F+(Table C-1 thickness)]
Machine Bolt B
or For “n” values
[B+(pipe thickness for each lap)] use negative length tolerances
or per ASME B18.2.1
[B-F+(Table C-1 thickness)]
For Lapped to 0.06 in. Raised Face, male face on flange One Lap and 0.06 in.
For Lapped to 0.25 in. Male Face on Flange One Lap and 0.25 in.
For Lapped to Female Face on Flange One Lap not less than 0.25 in.
TECHNICAL DATA
For Male in Lap to Female in Lap 2 x pipe wall with Lap for Male not less than 0.25 in.
160
Nominal
Forgings Castings Plates
Designation
C–Si 1A 105 (1) A 216 Gr. WCB (1) 3A 515 Gr. 70 (1)
C–Mn–Si A 350 Gr. LF2 (1) A 516 Gr. 70 (1), (2)
C–Mn–Si–V A 350 Gr. LF6 Cl. 1 (4) A 537 CI. 1 (3)
3 1/2 NI A 350 Gr. LF 3
NOTES
1. Upon prolonged exposure to temperatures above 800°F,
the carbide phase of steel may be converted to graphite.
Permissible, but not recommended for prolonged use
above 800°F.
2. Not to be used over 850°F
3. Not to be used over 700°F
4. Not to be used over 500°F
161
BTU / minute 12.969 ft. - lbs. / sec. Foot / pounds 0.001286 BTU
BTU / minute 0.02358 HP
Gallons (gal.) 3785 cu. cm.
BTU / minute 0.01758 kW
Gallons 0.1337 cu. ft.
BTU / minute 17.5784 W
Gallons 231 cu. in.
Calorie (cal.) 0.003966 BTU Gallons 128 fl. oz.
Gallons 3.785 L
Centimeter (cm.) 0.3937 in.
Gallons of water 8.35 lbs. / water @ 60º F
Centimeter 0.03280 ft.
Centimeter 0.01 m.
Horsepower (HP) 42.41 BTU / min.
Centimeter 10 mm.
Horsepower 33,000 ft. - lbs. / min.
Horsepower 550 ft. - lbs. / sec.
Centimeters of Mercury 0.01315 Atmospheres
Horsepower 0.7457 kW 1060 W
Centimeters of Mercury 0.4461 ft. of water
Horsepower 745.7 W
Centimeters of Mercury 136.0 kgs. / sq. m.
Centimeters of Mercury 27.85 lbs. / sq. ft.
Boiler Horsepower (BHP) 33,520 BTU / hr.
Centimeters of Mercury 0.1934 lbs. / sq. in.
Boiler Horsepower 9,803 kW - hr.
Cubic feet (cu. ft.) 2.832 x 104 cu. cm. Horsepower - hours (hph) 2544 BTU
Cubic feet 1728 cu. in. Horsepower - hours 0.7457 kW - hr.
Cubic feet 0.02832 cu. m.
Cubic feet 0.03737 cu. yd. Inches (in.) 2,540 cm.
Cubic feet 7.48052 gal. Inches 25.4 mm.
Inches 0.0254 m.
Cubic feet / minute 472.0 cu. cm. / sec. Inches 0.0833 ft.
Cubic feet / minute 0.1247 gal. / sec.
Inches of Mercury 0.03342 Atmospheres
Cubic foot of water 62.4 lbs. @ 60º F Inches of Mercury 1.133 ft. of water
Inches of Mercury 13.57 in. of water
TECHNICAL DATA
Feet (ft.) 30.48 cm. Inches of Mercury 70.73 lbs. / sq. ft.
Feet 12 in. Inches of Mercury 0.4912 lbs. / sq. in.
Feet 0.3048 m.
Feet 0.33 yd. Inches of water 0.002458 Atmospheres
Inches of water 0.07355 in. of Mercury
Feet of water 0.02950 Atmospheres Inches of water 0.5781 oz. / sq. in.
Feet of water 0.8226 in. of Mercury Inches of water 5.202 lbs. / sq. ft.
Feet of water 0.03048 kgs. / sq. cm. Inches of water 0.03613 lbs. / sq. in.
Feet of water 62.43 lbs. / sq. ft.
Feet of water 0.4355 lbs. / sq. in.
162
163
Rectangle Ellipse
A=WxL A = 3.142 x A x B
C = 6.283 x A2 + B2
2
Parallelogram
A=HxL Rectangular Solid
A1 = 2[W x L + L x H + H x W]
V=WxLxH
Trapezoid L1
L1 + L2
A=Hx 2 Cone S
L2 A1 = 3.142 x R x S + 3.142 x R x R
V = 1.047 x R x R x H
Triangle
WxH
A= 2
Cylinder
A1 = 6.283 x R x H + 6.283 x R x R
V = 3.142 x R x R x H
Circle
A = 3.142 x R x R
C = 3.142 x D Elliptical Tanks
D A2 + B2
R= A1 = 6.283 x
2 2 x H + 6.283 x A x B
D=2xR V = 3.142 x A x B x H
Sector of Circle
3.142 x R x R x a Sphere
A=
TECHNICAL DATA
360 A1 = 12.56 x R x R
L = .01745 x R x R x a V = 4.188 x R x R x R
a= L
.01745 x R
164
Compression Ratio
or
Pressure Ratio
165
14 4.2672 14 45.9318
15 4.5720 15 49.2126
20 6.0960 20 65.6168
30 9.1440 30 98.4252
40 12.1920 40 131.2336
50 15.2400 50 164.0420
60 18.2880 60 196.8504
70 21.3360 70 229.6588
80 24.3840 80 262.4672
90 27.4320 90 295.2756
100 30.4800 100 328.0840
166
k = c + 273.15 72ºC = ? ºK
k = 72 + 273.15
k = 345.15
72ºC = 345.15ºK
c = k – 273.15 250ºK = ? ºC
c = 250 – 273.15
c = –23.15
250ºK = –23.15ºC
167
Size Material
Specification
Wall Thickness
Description of designations:
WPB - ASTM A234 WPB
STD - Standard Weight
USA - NOTE: If Weldbend marks their fittings "Made in USA", it is your assurance
that both the starting material and the complete production is of USA origin.
168
Manufacturer
Production
of Product
Code (Optional)
Heat Codes*
Size
Material
Specification
Class Bore Dimensional
(If applicable) Specification
Description of designations:
150 - Class 150 (Weld Neck and Socket Weld Only)
USA - NOTE: If Weldbend marks their fittings "Made in USA", it is your assurance
that both the starting material and the complete production is of USA origin.
30,000
In. - Lbs. 48 98 144 240 360 540 720 — — —
Ft. - Lbs. 5 11 16 27 40 60 80 133 213 327
40,000
In. - Lbs. 64 128 192 320 480 720 — — — —
Ft. - Lbs. 7 13 20 33 50 75 100 167 267 408
50,000
In. - Lbs. 80 160 240 400 600 — — — — —
Ft. - Lbs. 8 16 24 40 60 90 120 200 320 490
60,000
In. - Lbs. 96 192 288 480 720 — — — — —
170
Bolt Diameters
1 1/8 1 1/4 1 3/8 1 1/2 1 5/8 1 3/4 1 7/8 2 2 1/4 2 1/2 2 3/4 3
12 17 23 27 37 50 57 73 107 147 197 257
142 200 272 320 800 600 800 — — — — —
24 33 45 53 133 100 133 146 213 293 394 515
285 400 544 640 — — — — — — — —
35 50 68 80 110 150 200 220 320 440 592 772
426 600 — — — — — — — — — —
47 57 91 107 147 200 257 293 427 587 789 1029
568 800 — — — — — — — — — —
59 83 113 133 183 250 333 366 533 733 987 1287
710 — — — — — — — — — — —
71 100 136 160 220 300 400 440 640 880 1184 1544
— — — — — — — — — — — —
83 117 159 187 257 350 467 513 747 1027 1381 1801
— — — — — — — — — — — —
95 133 181 213 293 400 533 587 853 1173 1579 2059
— — — — — — — — — — — —
107 150 204 330 330 450 600 660 690 1320 1776 2316
— — — — — — — — — — — —
118 167 227 267 367 500 667 733 1067 1467 1973 2513
— — — — — — — — — — — —
237 333 453 533 733 1000 1333 1467 2133 2933 3947 5147
— — — — — — — — — — — —
355 500 680 800 1100 1500 2000 2200 3200 4400 5920 7720
TECHNICAL DATA
— — — — — — — — — — — —
473 667 907 1067 1467 2000 2667 2933 4267 5867 7893 10293
— — — — — — — — — — — —
592 833 1133 1333 1833 2500 3333 3667 5333 7333 9867 12867
— — — — — — — — — — — —
710 1000 1360 1600 2200 3000 4000 4400 6400 8800 11840 15430
— — — — — — — — — — — —
171
STEP 1. Align component parts and clamp STEP 5. Apply torque in 20% (1/5) steps of
together with hold down. required final torque, loading all bolts
at each step before proceeding to
STEP 2. Lubricate stud (or bolt) threads next step.
in area of nut or forged ring
engagement, also lubricate face STEP 6. Tighten bolts in sequential order
of nuts (or bolt head) using a 0°-180°, 90°-270°, 45°-225° and 135°-315°
suitable lubricant. at each step until final torque is reached
(see attached sketches).
STEP 3. Install all bolts and nuts finger tight.
STEP 7. Continue to tighten bolts now using
STEP 4. Number bolts so that torquing rotational order until all bolts
requirements can be followed. are stable at final torque level. Two
complete times around is usually
required (see attached sketches).
TECHNICAL DATA
172
TECHNICAL DATA
173
174
3. Physical Data:
• Melting Point °F (°C): Greater than 2800 (1540)
• Vapor Pressure: Not Applicable
• Vapor Density (Air = 1):
TECHNICAL DATA
Not Applicable
• Solubility in Water: Negligible
• Specific Gravity (H2O = 1): Greater than 7
• % Volatile by Volume (%): Not Applicable
• Evaporation Rate: Not Applicable
175
EXPOSURE LIMITS
Material Or Component: OSHA PEL (mg/m3) ACGIH TLV (mg/m3)
Base Metal
Iron (Fe) 10 (Fe2O3 Fume) 5.0 (Fe2O3 Fume)
Alloying Elements
Aluminum (Al) None Listed 5.0 as welding fume
Carbon (C)* None Listed None Listed
Chromium (Cr) 1.0 as chrome 0.5 as chrome
Cobalt (Co) 0.1 as cobalt and fume 0.05 as fume
Columbium (Niobium) 5.0 as dust 10.0 as dust
Copper (Cu) 0.2 as copper; 1.0 as dust 0.2 as fume; 1.0 as dust
Lead (Pb) 0.05 as fume and dust 0.15 as dust and fume
Manganese (Mn)* 5 as manganese 5 as dust; 1 as fume
Molybdenum (Mo) 15 as insoluble compounds 10 as insoluble compounds
Nickel (Ni) 1.0 as Nickel 1.0 as Nickel
Phosphorous (P)* 0.1 as Phosphorus 0.1 as Phosphorus
Silicon (Si)* None Listed 10 total dust
Sulfur (S)* 13 sulfur dioxide 5 sulfur dioxide
Tungsten (W) None Listed 5 insoluble compounds
Vanadium (V) 0.5 dust; 0.1 fume 0.05 dust and fume
Zinc (Zn) coating 5.0 as fume 5.0 as fume
Boron (B) 15.0 as Oxide 10.0 as Oxide
Bismuth (Bi) None Listed None Listed
Tellurium (Te) 0.10 as Compound 0.10 as Compound
Titanium (Ti) 15.0 Dioxide 10.0 Dioxide
Zinc (Zn) 10.0 as Dust 5.0 Oxide; 5 fume
Tin (Sn) None Listed 10.0 as Tin Oxide
Note: T he above listing is a summary of elements used in alloying steel. Various grades of steel will contain
different combinations of these elements. Trace elements may also be present in minute amounts.
*Carbon Steel: The light coating applied to our products does not contain toxic materials such as mercury,
arsenic or lead.
176
Chronic:
177
Please note that all carbon steel forgings that we manufacture present no health hazard in their natural
state during use, transportation or storage. However, operations such as burning, welding or grinding may
generate concentrations of dust particles or fumes of the alloying elements that may present hazards. For the
information to be effective, it must be passed along to all safety and health personnel in your firm, as well as
to all personnel who handle or use the products and/or are involved with the implementation or control of
operations involving the products.
Disclaimer
Weldbend Corporation believes that the product described in the MSDS would be considered an “article” within the
meaning of Section 1910.1200. This MSDS is intended to be used solely for the purpose of satisfying informational
requests. It is not intended to preempt, replace or expand the terms contained in Weldbend Corporation Conditions
of Sale. Compliance with all the applicable federal, state and local laws and regulations remains the responsibility of
the user, and the user has the responsibility to provide a safe working place, to examine all aspects of its operation,
and to determine if or where precautions, in addition to those described herein, are required.
TECHNICAL DATA
178
We acknowledge the Technical Abilities and Assistance of Mr. Leslie F. Wasdell, C. Eng., M. I. Mech. E.
We acknowledge the Technical Abilities and Assistance of Mr. A.J. DelBuono, P.E.
WELDBEND CORPORATION
6600 SOUTH HARLEM AVENUE, ARGO, IL 60501-1930
www.weldbend.com
180
181
182
183
184
185
www.weldbend.com