This document provides an overview and instructions for using the SUPERTOOTH VOICE Bluetooth handsfree kit. The kit includes features like noise and echo cancellation for clear calls, text-to-speech instructions in 6 languages, and caller ID announcing. It can be charged via micro USB and paired with Bluetooth phones by entering 0000 as the PIN. The user can select their language and the kit will download the phone's contact list. If automatic transfer fails, contacts can be sent to the kit from the phone via Bluetooth.
This document provides an overview and instructions for using the SUPERTOOTH VOICE Bluetooth handsfree kit. The kit includes features like noise and echo cancellation for clear calls, text-to-speech instructions in 6 languages, and caller ID announcing. It can be charged via micro USB and paired with Bluetooth phones by entering 0000 as the PIN. The user can select their language and the kit will download the phone's contact list. If automatic transfer fails, contacts can be sent to the kit from the phone via Bluetooth.
This document provides an overview and instructions for using the SUPERTOOTH VOICE Bluetooth handsfree kit. The kit includes features like noise and echo cancellation for clear calls, text-to-speech instructions in 6 languages, and caller ID announcing. It can be charged via micro USB and paired with Bluetooth phones by entering 0000 as the PIN. The user can select their language and the kit will download the phone's contact list. If automatic transfer fails, contacts can be sent to the kit from the phone via Bluetooth.
SUPERTOOTH VOICE is a Bluetooth handsfree kit that supports headset or handsfree profile phones. Its special features include Full DSP Noise Cancellation/ Echo Cancellation. Thus, it provides an advanced audio quality. It is designed for easy handsfree operation and superior performance. This kit includes Text-To-Speech system. The voice announces instructions for the users in 6 different languages. It indicates the status of the Bluetooth device and it announces the name (or phone number if contact not loaded to kit) of the incoming caller! Don’t forget: Drive safely and within the law. Check if the national or local legislation into force in your 1 MFB or Multi-function Button 5 Microphone country does limit the use of mobile phones while driving. (power on & off / pairing / answer / 6 Speaker It is up to the user of this product to respect the said voice dial / redial / audio transfer) 7 Volume Down 2 End/Reject Button 8 Volume Up legislation in the area where he lives. 9 Charger Port (end & reject call / reload phonebook) 3 Bluetooth Indicator 10 Magnets 4 Charge Indicator
C. Charging down.” The Bluetooth Indicator (3) will turn steady red for 4 seconds and then turns off. 1. Connect the charger’s plug into the Charger Port (9) of the SUPERTOOTH VOICE. Connect the charger E. Selecting Language and to an external power source. Pairing to your Bluetooth mobile Phone Charge Indicator (4) Status: There are 6 languages featured in this kit. They are British Steady red: Low Batt Speech: Low battery English, American English, French, Italian, Spanish and Steady orange: Charging Speech: Charging German. Steady green: Full Charge Speech: Fully Charged After selecting your language, pair the SUPERTOOTH 2. When fully charged, disconnect VOICE to your Bluetooth mobile phone to create the link the charger. or audio connection between the two. Pairing should be done only at the first connection to a phone. D. Power On/Off Procedure: Power On: Press MFB (1) for 1 second. The Bluetooth 1. From OFF, press and hold MFB (1) for 6 seconds until Indicator (3) will turn blinking blue and a voice will say, the Bluetooth Indicator (3) turns blinking red/blue. “SUPERTOOTH VOICE ready. Connected to phone A voice will then announce, “Press green button (or if phone not available: No phone detected).” to select British English.” Instructions for other Note: The first time the SUPERTOOTH VOICE is languages will be announced succeedingly. switched on, the language selection is automatically ac- tivated. In this case, proceed to Section E (Procedure 2). 2. As soon as the preferred language is spoken, press the green button or MFB (1) to enable it. If British Power Off: Press and hold MFB (1) for 5 seconds until English is chosen, a voice will announce “British a voice announces, “SUPERTOOTH VOICE powering English selected. From phone’s Bluetooth menu,
search for devices then select ST VOICE and enter 7. The number of contacts will be announced while the pincode 0000.” This means the kit is now ready to pair. download is ongoing. Note: If you selected the wrong language, just turn off the IMPORTANT NOTICE: Some Symbian phones do not SUPERTOOTH VOICE and bring it back to pairing mode to support automatic Phonebook downloading. In this be able to select one more time from the available languages. case, “Automatic transfer not supported by phone. Please refer to manual or press red button to cancel 3. While the kit is in pairing mode, access the Bluetooth phonebook transfer.” will be announced then proceed menu of your phone. Turn on the Bluetooth function to Section F to transfer the phonebook manually from then execute a Bluetooth search. (See your phone’s the phone menu to the kit or press red button or End/ manual.) Reject Button (2) of SUPERTOOTH VOICE to connect 4. When the phone displays the list of Bluetooth devices, the kit to the phone without phonebook transfer. select ST VOICE. 5. Enter password/pin code 0000 and press OK. “Pairing 8. When download is complete, “SUPERTOOTH VOICE ready. Connected to phone” will be announced. successful to phone. Loading phonebook. Please Accept connection request from the phone if a prompt wait.” will be announced on the kit. is displayed. 6. The contacts in your phone will be downloaded to the Important Note: kit. The Bluetooth Indicator (3) turns violet for 1-2 Most phones automatically connect to the kit after pairing. seconds. With some phones you need to connect manually after Note: Some phones will display a question or request pairing. Go back to Bluetooth > Paired devices > highlight on the phone screen before it allows the kit to download ST VOICE > press Options > then press Connect. the phonebook. Just accept any request (e.g. Connection...?, Allow Internet access…?, DUN…?). The kit is now ready to use. When a call is received on
your mobile phone, the name of the incoming caller will need to send them one by one. be announced on the kit. c. Choose to send the contacts via Bluetooth > select F. Automatic Transfer Not Supported By Phone ST VOICE If automatic transfer of phonebook failed, you can send Note: On some phones, SIM contacts transfer is or transfer the contacts to the SUPERTOOTH VOICE by impossible. sending them via Bluetooth. Or, IMPORTANT: The other way is: This procedure will only work right after pairing or right after phonebook update (see Sections E and G a. Go to Options icon in your phone. respectively). b. Choose Bluetooth > Highlight ST VOICE > press Procedure: Key > Choose Transfer Address Book. 1. There are two ways to proceed with the procedure c. Choose to transfer via Bluetooth > select ST VOICE. depending on your phone model. 2. “Loading phonebook. Please wait.” will then be The common way is: announced on the kit. a. Go to the Phonebook of your phone. 3. The number of contacts will be announced as b. Choose a contact or contacts you want to send to download is ongoing. the kit. 4. After a few seconds, the phone will display “Data Note: Choose “Mark all” (if this option is available in your sent” or the kit will announce “SUPERTOOTH VOICE phone) to be able to send all contacts at one time. ready. Connected to phone.” For some phones, However, there are phones that do not support you may need to accept any connection prompt on sending all contacts at one time. Then, you the phone before reconnection takes place.
The kit is now ready to use. When a call is received on IMPORTANT NOTICE: Some Symbian phones do the user’s mobile phone, the name of the incoming caller not support automatic Phonebook downloading. In this case, “Automatic transfer not supported by G. Phonebook Update phone. Please refer to manual or press red button If you renamed or added a contact in your phone, you can to cancel phonebook transfer.” will be announced refresh the phonebook of the SUPERTOOTH VOICE in then proceed to Section F to transfer the phonebook order for the kit to recognize the change. manually from the phone menu to the kit or press red Procedure: button or End/Reject Button (2) of SUPERTOOTH VOICE to connect the kit to the phone without 1. Ensure that the phone is connected to the kit. In phonebook transfer. standby mode, long press the End/Reject Button (2) for 10 seconds. 4. When the download is complete, “SUPERTOOTH 2. “Loading phonebook. Please wait.” will be VOICE ready. Connected to phone.” will be announced. At the same time, the phone will announced. Accept connection request from the phone disconnect. if a prompt is displayed. Note: Some phones display a question or request H. Installation on the phone screen before it allows the kit to download the phonebook. Just accept any request Fix the metal clip of SUPERTOOTH VOICE on the sun visor. (Connection...?, allow Internet access…?, DUN…?). 3. The number of contacts will be announced while the download is ongoing.
Attach the magnetic back of SUPERTOOTH VOICE to Answer a Call: the fixed metal clip. The SUPERTOOTH VOICE must be When a call is received, the name or phone number placed in such way that its microphone is directed to the of the incoming caller will be announced on the kit. mouth of the user. During the ring tone, press MFB (1) for 1 second to answer the call and when call is answered, the Bluetooth Indicator (3) will turn steady blue. Or, assuming that Voice Answer is activated. (see Voice Answer Activation/Deactivation on Section K): I. Basic Operations After a beep is heard on the kit, accept a call by loudly and IMPORTANT: clearly saying “ACCEPT CALL”, “ACCEPT”, “ANSWER” The kit needs to be ‘paired’ to your Bluetooth mobile or “OK”; say it only once and within 3 seconds emphasizing phone first, before you can use the following functions. each syllables. When a call is answered, the Bluetooth See Pairing to your Bluetooth Mobile Phone in Section E. Indicator (3) will turn steady blue. Make a Call (Normal Dial): End a Call: Dial the number on your phone. Audio will automatically Press End/Reject Button (2) for 1 second to end the call. be on the kit. During an ongoing call, the Bluetooth “End of call” will be announced. Indicator (3) will turn steady blue. Voice Dial: Note: With some phones like Siemens S55 and Panasonic Important: Before using this feature, make sure that the X70, audio is always on the phone during an outgoing voice dialing function of your phone is activated and at call. You will need to press the MFB (1) for 1 second to least one voice tag is recorded on your phone. (Kindly refer transfer the audio to your kit. to the procedure in your phone’s manual.)
Note: Voice dialing entries must be stored in the phone’s When maximum volume is reached, “Maximum Volume” memory, not on the SIM card! will be announced on the kit. 1. Press the MFB (1) for 1 second. Audio Transfer (For Handsfree Profile Phones only): 2. A voice dial beep will be heard on the kit to prompt the During an ongoing call, you can transfer the audio. user to say the voice tag of the contact to call and the Bluetooth Indicator (3) will turn steady blue. Kit to Phone: Press and hold MFB (1) for 3 seconds 3. Say the voice tag exactly as how you recorded it. and the audio will be transferred to the phone. 4. The voice tag will be played back to you and then the Phone to Kit: Press MFB (1) for 1 second and the phone will dial the number automatically. audio will be transferred to the kit. Redial (For Handsfree Profile Phones only): Note: For some phones, you may need to accept any Press MFB (1) for 3 seconds. The last dialed number will connection prompt on the phone before automatic be redialed and “Redialing” will be announced on the kit. transfer takes place. Reject a Call (For Handsfree Profile Phones only): J. Advance Functions During the ring tone, press End/Reject Button (2) for Multi-Pairing / Switching Connections between Phones 1 second. The incoming call will be rejected and “Call The SUPERTOOTH VOICE can be paired up to 8 rejected” will be announced on the kit. Bluetooth phones. An additional pairing will automatically Volume Setting: delete the phone that has not been used for the longest Increase or decrease the volume by pressing the Volume time. Thus, the SUPERTOOTH VOICE always maintains Up (8) or Volume Down (7) button. Press repeatedly until 8 phones in its memory. desired level is reached. The Bluetooth Indicator (3) You can easily switch to any of the paired phones by: will turn violet as lowest and highest levels are reached. 1. Disconnecting the currently used phone using the
“Active devices” in the Bluetooth menu of that phone. • When activated, the user can accept a call by loudly 2. Connecting to the wanted phone by using the “Paired and clearly saying “ACCEPT CALL”, “ACCEPT”, devices” in the Bluetooth menu of that wanted phone. “ANSWER” or “OK”; say it only once and within 3 Note: Reconnection to a paired phone can also be done seconds emphasizing each syllables. by pressing the MFB (1). However, the SUPERTOOTH • When deactivated, apply normal answer of call. VOICE will attempt to connect to the last used phone Activation: Press and hold Volume Up (8) Button for only. Therefore, it is recommended to connect to another 5 seconds until a voice announces, “Voice answer paired phone using the phone menu. enabled.” At this point, when a call is received, a Erasing all Paired Devices and Phonebook: beep will be heard after the name or phone number of 1. From OFF, press and hold the Volume Up (8) Button. the caller is announced. 2. While holding the Volume Up (8) Button, press MFB Deactivation: Press and hold Volume Down (7) Button (1) for 1 second until a distinctive melody is heard on for 5 seconds until a voice announces, “Voice answer the kit, and the version is announced. Then switch off disabled.” When a call is received, only the name or for 10 seconds. phone number of the caller will be heard on the kit. All the paired devices and phonebook are now erased. Automatic Reconnection: Automatic reconnection occurs when the user (without turning OFF the kit) goes out of Bluetooth range for K. Special Feature more than 20 seconds and then goes back in range. Voice Answer Mode: In this case, a new reconnection system is able to Important Notice: This feature may not perform well reconnect the kit to the phone anytime the user goes inside a car with high background noise. back in range. 10 Note: This automatic reconnection could take up to (British English, American 10 seconds after user goes back in range. English, French, Italian, Spanish In case of intentional disconnection (using the phone and German) menu), this system is not activated. *Full Duplex *Full DSP Noise Cancellation / Echo Cancellation SUPERTOOTH VOICE Specifications *Digital Volume Control *Voice Recognition Dialing Bluetooth Compliance: Bluetooth version 2.0 specifications (If phone supports) Supported Bluetooth *Last Call Redial Profiles: Supports headset and handsfree *Reject Incoming Call profiles with automatic detection *Can also be charged directly from a Operating Range: Up to 10 meters PC via USB Cable (not included) Frequency: 2.4 GHz *Compact Size Talk Time: Up to 15 hours *Answer incoming calls by voice control Stand-by time: Up to 800 hours *Full automatic reconnection Charging Time: 3 hours Installation: Quick fixation on sun visor via Battery Type: Rechargeable Lithium Ion magnetic clip Special Features *Voice to announce CallerID, Dimensions (mm): 18.2 x 60.2 x 122 Bluetooth device status and Weight: 115 g instruction guides in 6 languages 11