Scribd Logo
Upload

Welcome to Scribd!

  • 3V FM Transmitter For 88MHz To 108MHz

    Uploaded by

    Δημητριος Σταθης
    149 views1 page
    1) The circuit uses a Colpitts oscillator with capacitors and an inductor determining the 88-108MHz frequency, powered by a BF982 transistor and MOSFET. 2) Two driver stages amplify the oscillator signal, with the first stage using a BF199 transistor to constantly load the oscillator, and the second stage using a BFR90 transistor to further amplify the signal to the antenna. 3) A short copper wire can be used for the antenna as the output power is low, and no large antenna is needed.

    Original Description:

    ELECTRONIC

    Original Title

    3V FM Transmitter for 88MHz to 108MHz

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    1) The circuit uses a Colpitts oscillator with capacitors and an inductor determining the 88-108MHz frequency, powered by a BF982 transistor and MOSFET. 2) Two driver stages amplify the oscillator signal, with the first stage using a BF199 transistor to constantly load the oscillator, and the second stage using a BFR90 transistor to further amplify the signal to the antenna. 3) A short copper wire can be used for the antenna as the output power is low, and no large antenna is needed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    149 views1 page

    3V FM Transmitter For 88MHz To 108MHz

    Uploaded by

    Δημητριος Σταθης
    1) The circuit uses a Colpitts oscillator with capacitors and an inductor determining the 88-108MHz frequency, powered by a BF982 transistor and MOSFET. 2) Two driver stages amplify the oscillator signal, with the first stage using a BF199 transistor to constantly load the oscillator, and the second stage using a BFR90 transistor to further amplify the signal to the antenna. 3) A short copper wire can be used for the antenna as the output power is low, and no large antenna is needed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 1

    3V FM Transmitter for 88MHz to 108MHz  

      3V FM Transmitter for 88MHz to 108MHz  

    The important part of the circuit is formed of the Colpitts type oscillator. C3,C4,C5,C6,CD1-CD2 and L1 determines the
    frequency. BF982 and dual gate MOSFET are active parts in oscillator. When the input impedance of the MOSFET gate
    inputs are high, LC tank is not affected. However transistors force the LC tank and cause phase shift. Two driver stages
    are added to isolate the antenna from oscillator. First stage (BF199) amplifies the low signal of the oscillator and works as
    a constant load. The second stage (BFR90) amplifies the signal going through the antenna some more. A short copper
    wire can be used as an antenna here. Attaching a large antenna to this circuit is unnecessary because the output power is
    low.

    Notes: 

    1. Coil 1: Winding wire must be 1 mm thick and isolated. Number of turns: 3.5 . 5mm core must be used and the distance
    between each turn must be 1mm. 

    2. You can use BF199 instead of BFR90. 


    3. If you can't find the varicap diode, you
    can use MV104 instead.

    You might also like