Scribd Logo
Upload

Welcome to Scribd!

  • Medaret S1 - S2 S3: Data Sheets

    Uploaded by

    farid
    56 views1 page
    The MEDARET S1, S2, and S3 are surface retarders used to delay the setting of cement on concrete surfaces. MEDARET S1 has a fine layer effect, S2 has an average layer effect, and S3 has a thick layer effect. They are applied after initial water evaporation and before full concrete setting to create a roughened or decorative exposed aggregate surface. The appropriate retarder is chosen based on the desired effect and tested first on a small surface. After application and curing, the surface is pressure washed to reveal the aggregate design.

    Original Description:

    Original Title

    Medaret s1 s2 s3

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    The MEDARET S1, S2, and S3 are surface retarders used to delay the setting of cement on concrete surfaces. MEDARET S1 has a fine layer effect, S2 has an average layer effect, and S3 has a thick layer effect. They are applied after initial water evaporation and before full concrete setting to create a roughened or decorative exposed aggregate surface. The appropriate retarder is chosen based on the desired effect and tested first on a small surface. After application and curing, the surface is pressure washed to reveal the aggregate design.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    56 views1 page

    Medaret S1 - S2 S3: Data Sheets

    Uploaded by

    farid
    The MEDARET S1, S2, and S3 are surface retarders used to delay the setting of cement on concrete surfaces. MEDARET S1 has a fine layer effect, S2 has an average layer effect, and S3 has a thick layer effect. They are applied after initial water evaporation and before full concrete setting to create a roughened or decorative exposed aggregate surface. The appropriate retarder is chosen based on the desired effect and tested first on a small surface. After application and curing, the surface is pressure washed to reveal the aggregate design.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 1

    Data sheets 2 1 4 6

    MEDARET S1 - S2 & S3
    Surface retarder for concrete

    DESCRIPTION INSTRUCTIONS
    The MEDARET S1, S2 and S3 are retarders of MATERIAL
    surface used to delay the cement setting The MEDARET S endeavour to the pulverizer to the
    superficially. surface of the concrete to treat.
    They suspend temporarily the setting of Portland IMPLEMENTATION
    cement on the surface while the concrete in lower A preliminary test on a reduced surface is
    part hardens normally. recommended to make sure that the result
    obtained is satisfactory.
    MEDARET S1: Action on fine layer
    MEDARET S2: Action on average layer To agitate the MEDARET S before employment.
    MEDARET S3: Action on thick layer To apply as soon as the water of sweating
    disappeared (generally 15 to 30 mn after casting), by
    pulverization in a uniform and continuous way
    USE without lack nor overload.
    After waiting from 6 to 12 midnight according to the
    The surface retarders MEDARET S are used for the
    climatic conditions (the shortest time corresponds to
    concretes to obtain a rough surface allowing a good
    the high temperatures), to wash the concrete with
    fixing without repair or to obtain a decorative
    water under pressure from 80 to 120 bars. Possibly it
    concrete of type washed with apparent aggregates
    is also possible to proceed manually by brushing and
    (concrete roadways and pavements, pavings…)
    rinsing of surface.
    A preliminary test is recommended before cleaning
    The choice between the MEDARET S1, S2 and S3
    totality in order to make sure that the concrete in
    will be done according to the required result. To carry
    lower part sufficiently hardened. The final result
    out preliminary tests on reduced surfaces.
    obtained (aspect of the concrete) will depend on the
    choice of the retarder of surface, of the composition
    CHARACTERISTICS of the concrete, the climatic conditions, the duration
    of contact and the pressure or mode of cleaning.
    MEDARET S1, S2 and S3 are presented in the form
    of slightly yellowish translucent liquid.
    CONSUMPTION
    They do not contain solvents.
    One liter of MEDARET S makes it possible to treat
    MEDARET S1: approximately 4m ² with 5 m ² is a consumption from
    pH .................................................................... 8,8 200 to 250 ml/m ². This consumption can be higher
    Density ................................................. 1,05 ±0,01 according to the conditions for application.

    MEDARET S2:
    pH .................................................................... 8,8 PACKAGING AND STORAGE
    Density ................................................. 1,08 ±0,01 The MEDARET S1, S2 and S3 are delivered out of
    cans of 10l and 20l, like out of barrels of 225 L.
    MEDARET S3:
    pH .................................................................... 8,8
    Density ................................................. 1,12 ±0,01
    Shelf life: The MEDARET S are preserved 06
    months in their packing of origin, with the shelter of
    freezing and heat.

    The information given in this data sheet is based on our knowledge and our experiment to date. They are given for indication.
    It belongs to the customer to ensure that this product suits to the intended usage.

    Granitex
    Zone industrielle Oued Smar – BP85 Oued Smar – 16270 Alger
    Tél : (213) 021 51 66 81 & 82
    Fax : (213) 021 51 64 22 & 021 51 65 23
    www.granitex.dz - E-mail: [email protected]

    You might also like