Professional Documents
Culture Documents
H12 211 HCIA RoutingSwitchnig V2.5
H12 211 HCIA RoutingSwitchnig V2.5
H12-211
HCIA-Routing &
Switching V2.5 Exam
Version: 12.0
Web: www.marks4sure.com
Email: [email protected]
IMPORTANT NOTICE
Feedback
We have developed quality product and state-of-art service to ensure our customers interest. If you have any
suggestions, please feel free to contact us at [email protected]
Support
If you have any questions about our product, please provide the following items:
exam code
screenshot of the question
login id/email
please contact us at [email protected] and our technical experts will provide support within 24 hours.
Copyright
The product of each order has its own encryption code, so you should use it independently. Any unauthorized
changes will inflict legal punishment. We reserve the right of final explanation for this statement.
Practice Test Huawei - H12-211
Question #:1
On an STP-Enabled Switch, a port in learning state can transition to the forwarding state only after the forward
delay
A. TRUE
B. FALSE
Answer: A
Question #:2
A. 0
B. 1
C. 2
D. 3
Answer: A
Question #:3
Which of the Following statement about the "ip route-static 10.0.2.2 255.255.255.255 10.0.12.2 preference 20"
command are true?
A. This route can guide forwarding of the data packet with the destination IP address 10.0.2.2
B. This route can guide forwarding of the data packet with the destination IP address 10.0.12.2
Answer: A C D
Question #:4
After a blackhole MAC address is configured on a device, the device discard packet whose source or
destination MAC address is the blackhole MAC address
A. TRUE
B.
B. FALSE
Answer: A
Question #:5
A. Static Routing
B. Direct Routing
C. OSPF
D. BGP
Answer: C D
Question #:6
The DHCPv6 server also provide configuration information such as the DNS server address for hosts?
A. True
B. False
Answer: A
Question #:7
The last option field (option) of an IPv4 packet is a length-variable and optional field. What is the maximum
length of this field?
A. 40B
B. 60B
C. 20B
D. 10B
Answer: A
Question #:8
In RSTP, an edge port becomes a common STP port after receiving a Configuration BPDU.
A.
A. TRUE
B. FALSE
Answer: A
Question #:9
A. ICMP message can record time, including the Original time, packet receiving time, and packet sending
time
B. ICMP message are encapsulated in IP packet but not at the transport layer
C. ICMP message include error message, control message, request/response messages, and update
messages.
Answer: A B C
Question #:10
Which of the following addresses cannot be used as the IPv4 address of a host
A. Class A address
B. Class B address
C. Class C address
D. Class D address
Answer: D
Question #:11
Only the device whose IP address is 172.16.105.2 is allowed for remote login?
A.
A. TRUE
B. FALSE
Answer: A
Question #:12
The MAC address table of a switch is as follows. The switch receives a data frame whose Source Mac address
is 5489-989d-1d30 and destination MAC address is 5489-9811-0b49. Which of the following statement is
true?
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
A. if the data frame is received from Eth0/0/1, the switch forwards the data frame through Eth0/0/3.
B. if the data frame is received from Eth0/0/3, the switch discards the data frame.
C. if the data frame is received from Eth0/0/1, the switch floods the data frame.
D. if the data frame is received from Eth0/0/3, the switch disables Eth0/0/3.
Answer: A
Question #:13
A. Direct routing
B. OSPF
C. RIP
D. Static routing
Answer: B C D
Question #:14
Which of the following statements are true according to the following configuration of a router?
2004::1/64
Router ID 10.0.4.4, Network Type BROADCAST, Cost: 1 Transmit Delay is 1 sec, State Backup, Priority 1
Designated Router (ID) 10.0.2.2
Interface Address FE80::2E0:FCFF:FEBB:6CF9 Backup Designated Router (ID) 10.0.1.1 Interface Address
FE80::2E0:FCFF:FEC6:4A10
Timer interval configured, Hello 10, Dead 40, Wait 40, Retransmit 5 Hello due in 00:00:05
Neighbor Count is 3, Adjacent neighbor count is 2 Interface Event 2, Lsa Count 4, Lsa Checksum 0xf258
Answer: A C D
Question #:15
You can run the "startup saved confugiration backup.cfg" command on the user interface of the versatile
routing platform (VRP) to specify the "backup.cfg"file as the configuration file for next startup
A. TRUE
B. FALSE
Answer: A
Question #:16
For the Versatile Routing Platform the login timeout period can be set only on a VTY interface
A. TRUE
B. FALSE
Answer: B
Question #:17
A router can assign a specific IPv6 address to a host through stateless address autoconfiguration?
A. TRUE
B. FALSE
Answer: A
Question #:18
A window Host is started for the first time. If the Host obtains the IP address using DHCP, what is the source
IP address of the first data packet sent by the host?
A. 0.0.0.0
B. 127.0.0.1
C. 169.254.2.33
D. 255.255.255.255
Answer: A
Question #:19
IPsec VPN can only encrypt and trAns mit unicast data, and GRE can encapsulate multicast data
A. TRUE
B. FALSE
Answer: A
Question #:20
A. TRUE
B. FALSE
Answer: A
Question #:21
A. TRUE
B. FALSE
Answer: B
Question #:22
Which of the following statements are true about the dynamic MAC address table?
A. After a device is reset , an interfaces card is hot swapped , or an interface card is reset , the saved entries
on the device or interface card are not lost.
B. Dynamic MAC address entries are obtained by learning the source MAC addresses of packets received
by an interface, and can be aged out.
C. After a device is rest , an interface card is hot swapped or an interface card is reset dynamic MAC
address entries on the device or interface card are lost.
D. You can obtain the number of users communicating on an interface by checking the number of specified
dynamic address MAC address entries.
Answer: B C D
Question #:23
which of the following fields is not included in the format of the network - layer packet header ?
C. TTL
D. Sequence number
Answer: D
Question #:24
A. TRUE
B. FALSE
Answer: B
Question #:25
In the VRP system you cannot delete files by running the delete or unreserved vrpcfg.zip command. You must
clear files in the recycle bin?
A. TRUE
B. FALSE
Answer: B
Question #:26
If a 10GE optical module is used to connect two Huawei S5710 switches , by default the interconnected
interfaces work in full -duplex mode.
A. TRUE
B. FALSE
Answer: A
Question #:27
Apply the Following ACL to SNMP. Which of the following statements is/are false?
A. The Device whose IP address is 192.168.1.2 can use the SNMP service
B. The Device whose IP address is 192.168.1.3 can use the SNMP service
C. The Device whose IP address is 192.168.1.4 can use the SNMP service
D. The Device whose IP address is 192.168.1.5 can use the SNMP service
Answer: D
Question #:28
Which of the following description regarding the STP forwarding state is incorrect?
B. A port in a forwarding state does not learn the source MAC address of a frame
Answer: B
Question #:29
How many TCP connections will be established when FTP is used to transfer files?
A. 1
B. 2
C. 3
D. 4
Answer: B
Question #:30
Which of the Following are the features of the default VLAN setting in a switch Configuration?
D. The IP address configured for a switch is applied only to a member port in the default VLAN
Answer: A B
Question #:31
Segment routing (SR) define destination address prefixes/nodes and adjacencies on the network as segments
and allocates segment IDs (SIDs) to these segments . Adjacency and prefix/node SIDs are non- sequentially
arranged in a segment list to form a forwar
A. TRUE
B. FALSE
Answer: B
Question #:32
On the command Line interface of Huawei AR routers , the role of the save command is to save the current
system time.
A. TRUE
B. FALSE
Answer: B
Question #:33
Which of the following packet is sent by a DHCPv6 client before it send a request packet to the DHCPv6
server
A. RS
B. RA
C. NS
D. NA
Answer: A
Question #:34
As shown in the figure, which of the following network devices can be used to implement communication
between host A and Host B?
A. Hub
B. layer 2 Switch
C. Router
D. Hub
Answer: A
Question #:35
An ACL rule is as follows. Which of the following IP address can be matched by the permit rule? rule 5
permit ip source 10.1.1.0 255.0.254.255?
A. 9.1.1.1
B. 8.2.2.1
C. 7.1.2.1
D. 6.1.3.1
Answer: A D
Question #:36
For STP, the massage Age in the configuration BPDUs sent by the root bridge is 0?
A. True
B. False
Answer: A
Question #:37
A. TRUE
B. FALSE
Answer: A
Question #:38
Which of the following SNMP packets is/are sent by the agent on the managed device to the NMS?
A. Get-Request
B. Get-Next-Request
C. Set-Request
D. Response
Answer: D
Question #:39
SR encapsulates the segment list identifying a forwarding path into a data packet header for transmission After
receiving the data packet, the receiver end parses the segment list. If the top SID of the segment list belongs to
the local node, the top SID is popped out, and then further processing is perfermed, if the top SID of the
segment list does not belong to the local node, the data packet is forwarded to the next node in equal cost
multiple path(ECMP) mode?
A. TRUE
B. FALSE
Answer: A
Question #:40
One of the reasons that segments routing (SR) is introduced is that traditional LDP has some restrictions.
Which of the following statements about LDP restrictions are true?
B. LDP supports path computation only based on IGP SPF(minimum cost ), not based on traffic
engineering.
C. LDP path computation depends on an IGP. If the IGP and LDP are not synchronized , black holes are
generated , affecting services.
D.
D. LDP has 11 types of protocal packets, which greatly increases link bandwidth consumption and device
CPU usage.
Answer: B C D
Question #:41
In terms of security, tunnel mode is more secure than the transport mode.
A. TRUE
B. FALSE
Answer: A
Question #:42
Startup patch package: null Next startup patch package: null Startup voice-files: null
The preceding information is the 'Display startup" command output on the AR2220 router. Which of the
following statement is false about Such information?
D. You can run the 'startup system software' command to modify the system file for next startup
Answer: A
Question #:43
A. Unicast address
B. Anycast address
C. Multicast address
D. Broadcast address
Answer: A B C
Question #:44
A. ECE0-AAFF-FEBB-CD7B
B. CCE0-AAFF-FEBB-CD7B
C. EEE0-AAFF-FEBB-CD7B
D. CCE0-AABB-FFFE-CD7B
Answer: A
Question #:45
A. TRUE
B. FALSE
Answer: A
Question #:46
A segment routing global block (SRGB) is a set of local labels reserved for global segments, In MPLS and
IPv6 an SRGB is a set of local labels reserved for global labels?
A. True
B. False
Answer: A
Question #:47
A. TRUE
B. FALSE
Answer: A
Question #:48
If a route destined for the same network has multiple next hops, what is the route?
A. Equal-cost route
B. Sub-optimal route
C. Multi-Path route
D. Default route
Answer: A
Question #:49
A. IP address
B. Gateway address
D. Operating system
Answer: A B C
Question #:50
Which of the following IP addresses can be used by another host to communicate with the host whose ip
address is 200.200.200.201/30 without the need to forward traffic through a router?
A. 200.200.200.1
B. 200.200.200.200
C. 200.200.200.202
D. 200.200.200.203
Answer: C
Question #:51
In IPv6, the flow label field, source address field, and destination address field specify a forwarding path for a
specific data flow?
A. TRUE
B. FALSE
Answer: A
Question #:52
A. 0
B. 60
C. 100
D. 120
Answer: B
Question #:53
A. TRUE
B. FALSE
Answer: B
Question #:54
D. Upper-layer header
Answer: C
Question #:55
A. True
B. False
Answer: B
Question #:56
During PPP link setup, which of the following phase can be directly converted from the Dead phase
A. Authenticate
B. Establish
C. Network
Answer: B
Question #:57
Which of the following modes can be used to generate a DUID for a DHCPv6 device ?
B.
Answer: A B
Question #:58
The root protection function provided by RSTP can take effect only on designated ports
A. TRUE
B. FALSE
Answer: A
Question #:59
When the host accesses web service of the server , the value of the 'protocol' field at the network layer is 6.
A. TRUE
B. FALSE
Answer: A
Question #:60
An interface on a router cannot function as both a DHCPv6 server and a DHCPv6 client
A. TRUE
B. FALSE
Answer: B
Question #:61
A. STP has two types of packets: configuration BPDU and TCN BPDU
B. After STP is enable on a port, the switch periodically sends TCN BPDUs through the designated port
C. BPDUs are encapsulated in Ethernet frames and the destination MAC address is a multicast MAC
address
D. During initialization, each switch enabled with STP proactively sends configuration BPDUs.
Answer: A B D
Question #:62
Which of the following port states are included in Rapid Spanning Tree Protocol (RSTP)?
A. Forwarding
B. Learning
C. Discarding
D. Listening
Answer: A B C
Question #:63
A. PPP support both synchronous and asynchronous links at the physical layer
C. PPP supports various network layer protocols, such as IPCP and IPXCP
D. In PPP, multiple physical links can be bound to one logical link to increase bandwidth
Answer: A C
Question #:64
Which of the following statement is true about root bridge election of STP?
A. If the bridge priorities of device are the same, the device with the largest MAC address becomes the root
bridge
B. The device with the largest bridge priority becomes the root bridge
C. The device with the smallest bridge priority becomes the root bridge
D. If the bridge priority are the same, the device with the largest number of ports becomes the root bridge
Answer: C
Question #:65
To provide the information about the IP addesses that a user packet traverses along the path to the destination,
which of the following does Tracert record in each expired ICMP TTL packet
A. Destination port
B. Source port
C. Destination IP address
D. Source IP address
Answer: D
Question #:66
In the case of Huawei router, the Tracert commands uses UDP to encapsulate probe packates
A. TRUE
B. FALSE
Answer: B
Question #:67
A. 2 bits
B. 4 bits
C. 8 bits
D. 16 bits
Answer: D
Question #:68
In a broadcast address, all host bits are set to 1 and a broadcast address can be used as a host address
A. TRUE
B. FALSE
Answer: B
Question #:69
Answer: A
Question #:70
According to the following configuration of Router C, how many Global unicast address prefixes are
advertised by Router C?
Huawei]display ospfv3 interface GigabitEthernet 0/0/0 GigabitEthernet0/0/0 is up, line protocol is up Interface
ID 0x3
2005::1/64
2009::1/64
Router ID 10.0.4.4, Network Type BROADCAST, Cost: 1 Transmit Delay is 1 sec, State Backup, Priority 1
Designated Router (ID) 10.0.2.2
A. 1
B. 2
C. 3
D. 4
Answer: C
Question #:71
If a device running STP receives an RSTP configuration BPDU, it discards the BPDU
A. TRUE
B. FALSE
Answer: A
Question #:72
On the network shown in figure, the host has ARP cache. Which of the following statement are true?
A. A static route needs to configured on the router. Otherwise , Host A and Host B cannot communicate
with each other
11.0.12.1 MAC-B
10.0.12.2 MAC-C
Answer: B D
Question #:73
which of the following options is not a segment routing (SR) label action?
A. Push
B. Swap
C. POP
D. switch
Answer: D
Question #:74
A. TRUE
B. FALSE
Answer: B
Question #:75
Which of the following commands can be used to change the device name to huawei ?
A. sysname huawei
B. hostname huawei
C. rename huwei
D. do name huawei
Answer: A
Question #:76
Answer: A B C D
Question #:77
IPv6 interface do not forward received data packets whose “Hop Limit” field is set to 1?
A. TRUE
B. FALSE
Answer: A
Question #:78
Which of the following statement about gratuitous ARP packet are true?
A. A system can determine whether conflicting IP addresses are used by sending a gratuitous ARP packet
B. A gratuitous ARP packet uses the same format as an ARP request packet
D. A gratuitous ARP packet uses the same format as an ARP reply packet
Answer: A B
Question #:79
A. Solicit
B. Advertise
C. Discover
D. Offer
Answer: A B
Question #:80
B. Broadcast
Answer: A B C D
Question #:81
What is the default interval for sending OSPF Hello packets on a broadcast network?
A. 10s
B. 20s
C. 30s
D. 40s
Answer: A
Question #:82
The maximum number of VTY user interfaces determines how many users can log in to the device through
Telnet or STelnet at the same time.
A. TRUE
B. FALSE
Answer: A
Question #:83
Refer to the graphic, which of the following statement are true about VLAN configuration on Huawei
Switches?
A. Client 1 belongs to VLAN 10 and the VLAN assignment command on LSW1 is correct
B. Client 2 belongs to VLAN 20 and the MAC address based VLAN assignment command on LSW1 is
correct
C. Client 3 belongs to VLAN 30 and the VLAN assignment command on LSW1 is correct
D. Client 4 belongs to VLAN 40 and the VLAN assignment command on LSW1 is correct
Answer: A B D
Question #:84
A. 546
B. 547
C. 548
D. 549
Answer: B
Question #:85
A Company applies for a class C IP address for subnetting. It has six branches and the largest branch should
have 26 host. What would be an appropriate subnet mask for the largest branch?
A. 255.255.255.0
B. 255.255.255.128
C. 255.255.255.192
D. 255.255.255.224
Answer: D
Question #:86
Which of the following IPv6 addresses corresponds to the solicited -node multicast address of
FF02::1:FFAB:FECA?
A. 2020::FFAB:FECA
B. 2020::EEAB:FECA
C. 2020::FFBA:FECA
D. 2020::FFBA:FECA
Answer: A B
Question #:87
On an STP- enabled switch, TCN BPDUs are sent only when a port on the local switch is faulty?
A. TRUE
B. FALSE
Answer: B
Question #:88
Which of the following IPv4 addresses can be directly used by a host to access the internet ?
A. 192.168.1.1/24
B. 10.255.255.254/24
C. 172.16.255.254/24
D. 172.32.1.1/24
Answer: D
Question #:89
Which of the following statement about IPv6 anycast addresses are true?
A. Packet destined for an anycast address are sent to the nearest interface identified based on routing
distance
B. Anycast and Unicast address space use the same address space
Answer: A B C
Question #:90
Which of the following layers are not included in the TCP/IPv4 model?
A. Application layer
B. Session layer
C. Presentation layer
D. Network layer
Answer: B C
Question #:91
The administrator wishes to configure OSPF on a router in the network, however the router has no loopback
interface. Which value will be used as the router ID
B.
Answer: B
Question #:92
When a switch port receives a frame that does not carry a VLAN tag, it must add a PVID to the frame.
A. TRUE
B. FALSE
Answer: A
Question #:93
Which of the following statements is true about an STP-enable port in forwarding state?
B. The port only receive and processes BPDUs and does not forward user traffic
D. The port creates MAC address entries based on the received user traffic but does not forward user traffic
Answer: A
Question #:94
A. TRUE
B. FALSE
Answer: B
Question #:95
The Output of the "display ospf peer" command on a router is as follows. Which of the following statements
are true?
Router ID: 10.0.1.1Address: 10.0.12.1 State: Full Mode:Nbr is Master Priority: 1 DR: 10.0.12.2 BDR:
10.0.12.1 MTU: 0
Answer: A B D
Question #:96
Which field in the IPv6 packet header can be used for QOS?
A. Traffic Class
B. next header
C. version
D. Payload length
Answer: A
Question #:97
The loop protection function provided by RSTP can take effect only on designated port
A. TRUE
B. FALSE
Answer: B
Question #:98
Which of the following statements are true according to the following configuration?
D. The Local Router and the router Whose router ID is 10.0.3.3 cannot directly exchange link state
information.
Answer: B D
Question #:99
A. TRUE
B. FALSE
Answer: A
Question #:100
The following commands output is displayd on an STP port on a swith. Which of the following statements is
false?
Active Times:Hello 2s MaxAge 20s FwDly 15s MaxHop 20 CIST Root/ERPC:0 .4c1f-cc7f-3216 / 0
CIST RegRoot/IRPC :32768.4c1f-cc93-3356 / 0The interval at which the port sends configuration BPDUs is 2
seconds
Answer: C
Question #:101
The Following Figure shows the network topology and OSPF area partition. Router R2, R3 and R4 are OSPF
ABR's but R1 is Not?
A. TRUE
B. FALSE
Answer: A
Question #:102
Which username and password will be used by the peer router to perform PPP link authentication? aaa
local-user test1 password cipher test1 local-user test1 service-type telnet local-user test2 password cipher test2
Answer: A
Question #:103
Which of the following packets are used by the DHCPv6 client and DHCPv6 server to determine whether the
client uses DHCPv6 stateful autoconfiguration or DHCPv6 stateless autoconfiguration?
A. RS
B. RA
C. NS
D. NA
Answer: A B
Question #:104
When Forwarding a data packet, a router need to change the destination IP address of the data packet?
A. TRUE
B. FALSE
Answer: B
Question #:105
Which of the following packets is used by the DHCPv6 server to reply to solicit packets ?
A. Advertise
B. Offer
C. Reply
D. Request
Answer: A
Question #:106
Which of the Following statement about the configuration of the G0/0/1 interface on router A is/are true?
rule 5 deny 17
rule 10 deny 89
rule 15 deny 6
A. This interface can establish OSPF neighbor relationships with other routers
Answer: A B C
Question #:107
Which of the following statements about the link aggregation are true?
B. GE electrical interface and GE optical interface cannot be added to the same Eth-Trunk interface
D. Devices at both ends of an Eth-trunk must use the same link-aggregation mode.
Answer: A B C D
Question #:108
The Router ID of the OSPF enabled router must be same as the IP address of an interface on the router?
A. TRUE
B. FALSE
Answer: B
Question #:109
Layer 2 switches are data link layer devices that identify MAC addresses of Layer 2 data frames and forward
Layer 2 data frames based on MAC addresses. In addition, they record mappings between MAC addresses and
A. TRUE
B. FALSE
Answer: A
Question #:110
In STP , when a designated port receives an inferior configuration BPDU, the designated port immediately
sends its own configuration, BPDU to the downstream device?
A. TRUE
B. FALSE
Answer: A
Question #:111
A. Bridge ID
B. Port ID
D.
Answer: A
Question #:112
A. The IP address mask of host A is different from that of host B, therefore Host A & B cannot
communicate with each other
D. Host A and B can communicate with rach other only when the IP address of Host A and Host B have
same masks.
Answer: B
Question #:113
B. Destination/Mask indicates the address and mask length of a destination network or host
Answer: C
Question #:114
A. UDP
B. TCP
C. HTTP
D. FTP
Answer: A
Question #:115
A. TRUE
B. FALSE
Answer: A
Question #:116
Which of the following bits are used in the Flag field in the RSTP configuration BPDU but not used in the
Flag field in the STP
A. TCA
B. TC
C. Proposal
D. Agreement
Answer: C D
Question #:117
As shown below, the routing table ofthe router consists of direct routes and static routes?
<Huawei>display ip routing-table
------------------------------------------------------------------------------
A. TRUE
B. FALSE
Answer: A
Question #:118
Which of the following is not the reason why RSTP can increase the convergence speed
A. P/A mechanism
B. Edge port
Answer: B
Question #:119
According to OSI reference model, which layer is responsible for end to end error checking and flow control?
A. Physical Layer
C. Network Layer
D. Transport Layer
Answer: D
Question #:120
Which of the following parameters can be allocated to clients in DHCPv6 statefull autoconfiguration?
A. IPv6 Address
B. DNS Address
C. PD prefix
D. MAC address
Answer: A B C
Question #:121
Which of the following service modules has/have the ACL with the default action of permit?
A. telnet
B. HTTP
C. SNMP
D. flow policy
Answer: D
Question #:122
A switch receives a VLAN tagged fame, but the destination MAC address can't be found in the switch's MAC
address table, how will the switch react ?
B. The switch will broadcast this frame to all ports in this VLAN.
C. The switch will broadcast this frame to all access ports in this VLAN.
Answer: B
Question #:123
Which of the following must be consistent at both ends of an OSPF adjacency relationship to be established
A. Router Priority
C. Router ID
D. Area ID
Answer: B D
Question #:124
A. TRUE
B. FALSE
Answer: A
Question #:125
A DHCPv6 client send a ( ) packet to a DHCPv6 server to request an IPv6 address and network configuration
parameters
A. Discover
B. Solicit
C. Advertise
D. Request
Answer: D
Question #:126
Which of the following statements about the static route preference on huawei devices is false?
C. Static route preference is either internal or external. Administrators can modify external preferemces.
Answer: C
Question #:127
<Huawei>display ip routing-table
------------------------------------------------------------------------------
------------------------------------------------------------------------------
A. The Next hope of route destined for 10.0.3.3/32 is not directly connected. As a result, the router does not
forward data packets with the destination IP address 10.0.3.3
B. The Router forwards data packets with the destination IP address 10.0.3.3 through Eth0/0/0
C. The Router forwards data packets with the destination IP address 10.0.2.2 through Eth0/0/0
D. The Router forwards data packets with the destination IP address 10.0.12.1 through Eth0/0/0
Answer: B C D
Question #:128
If the DHCPv6 client and DHCPv6 server reside on different links, a DHCPv6 relay agent is required?
A. TRUE
B. FALSE
Answer: A
Question #:129
As define in RSTP to improve the convergence speed you can define the port that is directly connected to a
terminal as the ( )
A.
A. Fast port
B. Backup port
C. Root port
D. Edge port
Answer: D
Question #:130
On P2P networks , OSPFv3 does not need to send DD packets when establishing an OSPFv3 adjacency?
A. TRUE
B. FALSE
Answer: B
Question #:131
OSPF allows for "multiple" processes By default, OSPF selects a process whose number is ( )
A. 0
B. 1
C. 10
Answer: B
Question #:132
Which commands can be used to check the PPPoE client session status?
Answer: D
Question #:133
A. If the VLAN ID is the same as the PVID of the port and the port allow traffic with this VLAN ID to
pass through the port removes the VLAN tag from the data frames and forward them
B. If the VLAN ID is different from the PVID of the port the port removes the VLAN tag from the data
frames and then forwards them
C. If the VLAN ID is different from the PVID of the port, the port replaces the VLAN tag of the data
frames and then forward them
D. When the VLAN ID is different from the PVID of the port, the port discard the data frames
Answer: A
Question #:134
For multiple paths to the same destination network, the router needs to compare cost values of the paths. If the
cost value are the same the router selects the path based on the preference value
A. TRUE
B. FALSE
Answer: B
Question #:135
In the DHCPv6 stateless autoconfiguration solution, hosts do not need to send any DHCPv6 packet
A. TRUE
B. FALSE
Answer: A
Question #:136
In the MPLS domain, the Full Name of LER is label egress router.
A. TRUE
B. FALSE
Answer: B
Question #:137
A. TRUE
B. FALSE
Answer: A
Question #:138
As Shown in figure, all switches run STP. When a topology is stable, Power off SWA. Which of the following
statements are true?
B. SWC send configuration BPDU through G0/0/1 after the max age timer expires.
Answer: B C
Question #:139
A. Version
B. Traffic Class
C. Next Header
D. TOS
Answer: A B C
Question #:140
An AR2200 router is required to be configured from scratch. Which step are needed to achieve this?
Answer: A C
Question #:141
A. In the PPP frame format, the Protocol field is 0xC223. What is the protocol
B. LCP
C. NCP
D. PAP
E. CHAP
Answer: D
Question #:142
If the network administrator does not configure the backbone area, the router automatically make up the
backbone area.
A. TRUE
B. FALSE
Answer: B
Question #:143
As shown in the figure the host has ARP cache. Host A sends a data packet to host B. Which of the following
are the destination MAC address and destination IP address of the data packet?
Answer: D
Question #:144
Refer to the graphic, the static NAT command is executed on R1. When a PC connected to R1 accesss the
Internet, the destination address in the packet does not change?
A. TRUE
B. FALSE
Answer: A
Question #:145
When the IPsec data encapsulation mode is tunnel mode, the IP address of the intranet host is hidden. In this
way the security of the entire original data packet is protected.
A. TRUE
B. FALSE
Answer: A
Question #:146
If the value of the "Type/Length" field of an Ethernet data frame is 0x0800, the length range of the upper -
layer packet header carried by the data frame is from 20B to 60B.
A. TRUE
B. FALSE
Answer: A
Question #:147
According to the topology and configuration of the interconnected interface of switches shown in the figure,
the data frame tagged with VLAN 10 can be forwarded correctly between two switches.
[LSW1]interface GigabitEthernet0/0/1
[LSW2]interface GigabitEthernet0/0/1
A. TRUE
B. FALSE
Answer: B
Question #:148
Refer to the graphic. Four Switch are operating using STP. If port interface G0/0/2 on switch C fails, How
long will it take for the 'Blocked' interface to change to a state of forwarding?
A. 30 Seconds
B. 50 Seconds
C. 15 Seconds
D. 3 Seconds
Answer: B
Question #:149
Compared with IPv4 headers, IPv6 header do not contain the IHL field
A. TRUE
B. FALSE
Answer: A
Question #:150
When the “delete vrpcfg.zip” command is run on the user interface of the Versatile Routing Platform (VRP),
the file can be permanently deleted only after it is cleared from the recycle bin.
A. TRUE
B. FALSE
Answer: A
Question #:151
The administrator wishes to change name of the router, Under which view should the administrator be in order
to achieve this?
A. User-view
B. System-view
C. Interface-view
D. Protocol-view
Answer: B
Question #:152
The routers in the backbone area have information about all the LSDBs of other areas.
A. TRUE
B. FALSE
Answer: A
Question #:153
Which of the following field is added to the IPv6 packet header compared with the IPv4 packet header
A. Source Address
B. Destination Address
C. Version
D. Flow Label
Answer: D
Question #:154
A. TRUE
B. FALSE
Answer: A
Question #:155
What is the default least time of the IP address allocated by the DHCP server
A. 1 hour
B. 12 hour
C. 18 hour
D. 24 hour
Answer: D
Question #:156
Which is the default value of switch priority when STP is enabled on Huawei switch
A. 4096
B. 8192
C. 16384
D. 32768
Answer: D
Question #:157
Which of the following parameters is used for master/slave role election of OSPF?
A. Router ID
B. Interface IP address
D. OSPF Process ID
Answer: A
Question #:158
IF the EUI-64 address CA93-93FF-FE7B-057B is calculated based on a MAC address, what is the MAC
address?
A. C89E-9D7B-057B
B. CA9E-9D7B-057B
C. A89E-9D7B-057B
D. C89E-9DFF-057B
Answer: A
Question #:159
If the packet matches the deny rule in an ACL, the packet is discarded
A. TRUE
B. FALSE
Answer: A
Question #:160
In Huawei Devices, when NAPT uses a dynamic address pool, addresses in the pool can be used repeatedly.
That is, one IP address can be mapped to multiple intranet IP addresses
A. TRUE
B.
B. FALSE
Answer: A
Question #:161
On the Versatile Routing (VRP), which of the following commands is used to display the current interface
configuration in the interface view?
A. display users
B. display version
D. display this
Answer: D
Question #:162
Which of the following statements is true about the forward Delay timer of STP?
Answer: C
Question #:163
MPLS dual-label stacking packets are ( ) bytes longer than original IP packets
A. 4
B. 8
C. 16
D. 32
Answer: B
Question #:164
A trunk interface and a hybrid interface process packet in the same way when receiving data frames?
A. TRUE
B. FALSE
Answer: A
Question #:165
Which of the following statements are true about the default route?
A. If the destination address of a packet does not match any entry in the routing table, the packet is
forwarded through the default route
B. In a routing table, the route to 0.0.0.0 (with the mask being 0.0.0.0) is the default route
C. The routing table of any router must contain the default route
Answer: A B D
Question #:166
When configuring a static route on a broadcast interface , you must specify the next -hop IP address.
A. TRUE
B. FALSE
Answer: A
Question #:167
If AAA authentication is used on Huawei devices and the remote server does not respond , the authentication
can be performed on network devices?
A. TRUE
B. FALSE
Answer: A
Question #:168
An ACL does not filter traffic generated by the huawei device towards other devices, but only filters
forwarded traffic including traffic generated by other devices to access the Huawei device.
A. TRUE
B. FALSE
Answer: A
Question #:169
A DHCP Offer packet can carry only one DNS server address?
A. TRUE
B. FALSE
Answer: B
Question #:170
A. TRUE
B. FALSE
Answer: A
Question #:171
A. Source interface
C. Protocol number
D. Time-range
Answer: A
Question #:172
The IKE protocol is used to set up an SA for IPsec automatic negotiation. Identity authentication can be
A. TRUE
B. FALSE
Answer: A
Question #:173
A. 3001:DB8::346:ABCD:42BC:8D58
B. 3001:0DB8::0000:0346:ABCD:42BC:8D58
C. 3001:0DB8::0346:ABCD:42BC:8D58
D. 3001:DB8::0346:ABCD:42BC:8D58
Answer: A
Question #:174
By default in the SNMP protocol, which port number is used by the proxy process to send alarm massage to
the NMS?
A. 161
B. 162
C. 163
D. 164
Answer: B
Question #:175
A. None
B. Local
C. Radius
D.
D. 802.1X
Answer: A B C
Question #:176
Before forwarding IPv6 packets routers do not need to re-encapsulate the data link layer?
A. True
B. False
Answer: B
Question #:177
When a host uses DHCPv6 stateless autoconfiguration, the host sends a DHCPv6 ( ) packet to request
configuration information?
A. Information-Request
B. CONFIRM
C. SOLICIT
D. REBIND
Answer: A
Question #:178
Which of the following can prevent host A and Host B from communicating with each other?
interface G0/0/1
interface G0/0/2
C.
interface G0/0/1
interface G0/0/3
Answer: A B
Question #:179
As Shown in the figure, host A and host B cannot communicate with each other?
A. TRUE
B. FALSE
Answer: A
Question #:180
UDP does not guarentee data transmission reliability and does not provide packet sorting and traffic control
functions . It is suitable for the traffic that has low requirements for data tramission reliability, but high
requirements for the transmission
A.
A. TRUE
B. FALSE
Answer: A
Question #:181
C. Any network device needs to send ARP packets to obtain the data link layer identifier.
D. ARP packets cannot traverse routers and cannot be forwarded to other broadcast domain.
Answer: D
Question #:182
A. Basic ACL
B. Advanced ACL
C. Layer 2 ACL
D. User ACL
Answer: C
Question #:183
The LACP Priority is shown in the figure. Switch A and Switch B adopt link aggregation in LACP mode, All
interfaces are added to link aggregation group (LAG), and the maximum number of active port is set to
3.Which port of switch A is not an active port?
A. G0/0/0
B. G0/0/1
C. G0/0/2
D. G0/0/3
Answer: D
Question #:184
After an RSTP-enable switch receives the BPDUs with the TC bit set, the MAC addresses learned by all the
ports are cleared
A. TRUE
B. FALSE
Answer: A
Question #:185
In which of the following state can an STP- enabled port transition of the forwarding state directly
A. Blocking
B. Disable
C. Listening
D. Learning
Answer: D
Question #:186
A. 2000-2999
B. 3000-3999
C. 4000-4999
D. 6000-6031
Answer: B
Question #:187
For an STP- enabled switch, a port in any state can transition to the disabled state
A. TRUE
B. FALSE
Answer: A
Question #:188
As shown in Figure, Which of the following port will become the designated port?
A. G0/0/3 of SWB
B. G0/0/1 of SWC
C. G0/0/2 of SWC
D. G0/0/3 of SWA
Answer: D
Question #:189
Huawei VRP platform which of the following can be used to invoke the history commands saved by the
command line interface?
C. Ctrl+P
D. Ctrl+U
Answer: A C
Question #:190
Which of the following technologies is used to bind MAC addresses to interface on a switch
A. SEP
B. Port security
C. ACL
D. NAT
Answer: B
Question #:191
Which of the following statements is true about link aggregation in manual load balancing mode ?
A. In manual load balancing mode, all active interfaces forward data and load balance traffic.
B. A maximum of four active interfaces can be configured in manual load balancing mode.
C. In manual load balancing mode, devices at both ends of a link send LACPDUs to each other.
D. The number of active interfaces can be set in manual load balancing mode.
Answer: A
Question #:192
Which of the following information must be configured for a DHCPv6 relay agent?
A. DHCPv6 DUID
Answer: A B
Question #:193
Which of the following command is/are used to set the authentication Mode to HWTACACS authentication?
A. authentication-mode hwtacacs
B. authentication-mode local
C.
C. authentication-mode none
D. authentication-mode hwtacacs
Answer: A
Question #:194
Answer: A B C
Question #:195
The solicited-node multicast address corresponding to the IPv6 address 2001::12:1 is FF02::1:FF12:1
A. TRUE
B. FALSE
Answer: A
Question #:196
When a host uses the IP address 192.168.1.2 to access the internet , NAT must be performed
A. TRUE
B. FALSE
Answer: A
Question #:197
A. 0x00
B. 0x01
C. 0x02
D. 0x03
Answer: C
Question #:198
In the MPLS forwarding process, when MPLS packets pass through the ingress LER the ingress LER pops out
a label
A. TRUE
B. FALSE
Answer: B
Question #:199
which of the following OSPF packets can ensure LSA update reliabilty?
A. LSU
B. LSR
C. LSACK
D. DD
Answer: C
Question #:200
Which of the following storage devices is used to store the startup configuration files in a router ?
A. SDRAM
B. NVRAM
C. Flash
D. BootROM
Answer: C
Question #:201
Which layer of the OSI reference model does a switch work at?
A. Network layer
C. Physical layer
D. Transport layer
Answer: B
Question #:202
Which of the following is/are advantages of inter-VLAN routing in one-arm routing mode?
Answer: A
Question #:203
For STP the default root path cost of the root bridge is 0?
A. True
B. False
Answer: A
Question #:204
The network administrator finds that a port on the switch has learnt MAC address but cannot forward data
frames. What is the state of the port?
A. Blocking
B. Disabled
C. Listening
D. learning
Answer: D
Question #:205
On the network shown in the following figure, Router A functions as a DHCPv6 relay agent, and Router B
functions as DHCPv6 server. Which of the following paremeter must be configured on Router B?
A. DHCPv6 DUID
D. RA on G0/0/1 of Rouer B
Answer: A C D
Question #:206
A. TRUE
B. FALSE
Answer: B
Question #:207
A. FF02::1
B. FF02::2
C. FF12::1
D. FF12::2
Answer: A B
Question #:208
When a source end uses application software to send an image file through a network, the TCP/IP
encapsulation process of the file is : Data -> Segment -> packet -> Frame -> Bit.
A.
A. TRUE
B. FALSE
Answer: A
Question #:209
Which of the following statements regarding single area OSPF are correct
A. An IP address needs to be configured on a loopback interface of each router before configuring on OSPF
area
Answer: B D
Question #:210
A. TRUE
B. FALSE
Answer: A
Question #:211
C. The node SID must be different from the prefix SID of the node
Answer: C
Question #:212
With what kind of routers does a DRother route exchange link state information and route information
A. DR
B. BDR
C. DRother
Answer: A B
Question #:213
A. Gratituitous ARP packet are used to check for Duplicate IP addresses. Normally, a Host does not receive
an ARP reply packet after sending an ARP request packet with destination address of its own IP address.
If the Host receives an ARP reply packet, Anoth
B. gratuitous ARP are used to advertise a new MAC address. If MAC address of a host changes because its
network adapter is replaced, the host send a gratitious ARP packet to notify all hosts of the change
before the ARP entry ages out.
C. Gratuitous ARP packet are used to activate gateways when a host is idle
D. Gratuitous ARP packets are used to notify the active/standby switchover of router in a VRRP group.
Answer: C
Question #:214
According to following configuration , R1 And R2 are connected through low speed serial cables and PPP is
used to encapsulate data link layer packets? When the hold down value of R1 & R2 are different, ppp
negotiation
A. True
B. False
Answer: B
Question #:215
The management information base (MIB) is a virtual Database that is stored on the NMS?
A.
A. TRUE
B. FALSE
Answer: A
Question #:216
A. FF02::1:2
B. FF02::1
C. FF02::2
D. FF01::1:2
Answer: A
Question #:217
After the keepalive function is enabled for a GRE tunnel , the local end of the GRE tunnel sends a keepalive
packet to the remote end every 10s.
A. TRUE
B. FALSE
Answer: B
Question #:218
Based on the following configurations of the interface, from which of the following multicast address can the
interface receive data?
[Huawei] display ipv6 interface GigabitEthernet 0/0/0 GigabitEthernet 0/0/0 Current state : UP
FF02::2
FF02::1 FF02::1:FF6F:4F36
A. FF02::2
B. FF02::1
C. FF02::1:FF12:1
D. FF02::1:FF6F:4F36
Answer: A B C D
Question #:219
A. Reduce the time taken for establishing the OSPF adjacency relationship
Answer: A C
Question #:220
You can run the “pwd” and “dir” commands on the Versatile Routing Platform (VRP) to view file information
in the current directory
A. True
B. False
Answer: A
Question #:221
Which of the following information is not included in the MAC address table of a switch
A. MAC address
B. Port number
C. IP address
D. undo Eth-trunk
Answer: C
Question #:222
Which of the following packet is sent by a DHCPv6 client before it send a request packet to the DHCPv6
server
A. TRUE
B. FALSE
Answer: A
Question #:223
The multicast address FF02::1 indicate all nodes within the link-local scope?
A. TRUE
B. False
Answer: A
Question #:224
A. TRUE
B. FALSE
Answer: A
Question #:225
Which of the following field exits in both IPv6 and IPv4 packet headers?
A. Source Address
B. Destination Address
C. Version
D. Next Header
Answer: A B C
Question #:226
Which of the following IPv6 addresses can be obtained by the host if the DHCPv6 address pool is configured
as follows
A. 2019::2
B. 2019::4
C. 2019::6
D. 2019::8
Answer: A B C
Question #:227
Which of the following statements are true about the static MAC address table?
A. After a device is reset an interface card is hot swapped or an interface card is reset, the saved entries on
the device or interface card are not lost
B. After an interface is statically bound to a MAC address, other interface discarded a packet whose source
MAC address is the bound MAC address
C. Each static MAC address entry can be bound only to one outbound interface
D. You can check whether data is forwarded between two connected devices by checking the static MAC
address entries
Answer: A B
Question #:228
Which of the following content can an advanced ACL on a Huawei device filter
Answer: A B C
Question #:229
The Multicast address FF02::2 indicate all routers within the link-local scope?
A. TRUE
B. FALSE
Answer: A
Question #:230
When a two-way neighbor relationship is set up between two OSPF-enable routers, it means the LSDB
synchronization has been completed, but the SPF algorithm has not been performed yet
A. TRUE
B. FALSE
Answer: B
Question #:231
The TCP protocol uses the three-way handshake mechanism to establish and disable connections. Therefore,
TCP support reliable data?
A. TRUE
B. FALSE
Answer: A
Question #:232
A. 1
B. 2
C. 3
D. 4
Answer: A
Question #:233
Which of the following methods are supported by VRP to configure the router?
B. Through Telnet
D. Through FTP
Answer: A B
Question #:234
The PPPoE session establishment process can be divided into which stage?
A. Discovery stage
B. DHCP stage
Answer: A C
Question #:235
Which of the following port roles are added to Rapid Spanning Tree Protocol (RSTP) compared with STP?
A. Root port
B. Designated port
C. Alternate port
D. Backup port
Answer: D
Question #:236
In the LCP negotiation phase of the PPP protocol, which of the following packets is sent if all the parameters
sent by the peer end are accepted?
A. Configure- Request
B. Configure- ACK
C. Configure- Nak
D. Configure- Reject
Answer: B
Question #:237
A. BGP
B. OSPF
C. Static routing
D. Direct Routing
Answer: B
Question #:238
user-interface con 0
A. The Administrator wants to log in to the device and manage through console port
B. After the configuration is completed, the administrator cannot remotly login to the device to manage the
device
C. the user who log into the device through the console port has the highest level of user rights
D. The password for logging into the device through the console port is "cipher huawei2012"
Answer: D
Question #:239
On the Network shown in the figure, two switches are connected through four links. COPPER indicates the
electrical interface and Fiber indicates the optical interfaace. Which of the following interface can form an
Eth-trunk?
Answer: D
Question #:240
As shown in the figure, the administrator requires that all hosts cannot access the internet during 8:00 - 17:00
every day. In this case, which ACL rule needs to be bound to traffic-filter outbound in the interface
configuration of G0/0/1?
Answer: A
Question #:241
The solicited-node multicast address consists of the prefix FF02::1:FF00:0/104 and the last 24 bits of the
corresponding unicast address
A. TRUE
B. FALSE
C. quit
Answer: A
Question #:242
On the network shown in the figure, host A logs into router A through Telnet and obtains the configuration file
of the Router B through FTP on the remote CLI. How many TCP connections exists on Router A?
A. 1
B. 2
C. 3
D. 4
Answer: C
Question #:243
The following Shows the Eth-trunk information on a switch. Which of the following commands can be used to
delete Eth-trunk 1?
-----------------------------------------------------
PortNameStatusWeight
-----------------------------------------------------
GigabitEthernet0/0/1UP1
GigabitEthernet0/0/2UP1
-----------------------------------------------------
quit
quit
quit
quit
Answer: A
Question #:244
Refer to the graphic, 00e0-fc99-9999 is a specific host MAC address learned by a switch through ARP and the
host changes the IP address three times?
A. TRUE
B. FALSE
Answer: A
Question #:245
In a scenario without virtual links, the next hop of each OSPFv3 route is a link-local address?
A. True
B. False
Answer: A
Question #:246
When a switch port sends a data frame with the same VLAN tag and PVID , the switch port removes the
VLAN tag and forwards frame.
A. TRUE
B. FALSE
Answer: A
Question #:247
The Network administrator creates VLAN 10 and assigns an IP address to VLANIF10. When usig the
command "display IP Interface brief", the administrator finds that VLANIF10 is down. What should be done
to enable VLANIF10?
A. use the command "undo shutdown" under the interface view for VLAN10
B. assign a physical interface that has either an active or inactive physical state to VLAN10
C. assign only a physical interface that has an active physical state to VLAN 10
D. add an interface that has an active physical state and a trunk port associated with VLAN 10
Answer: C
Question #:248
As a new tunneling technology that replaces MPLS, segment routing (SR) has attracted more and more
attention. Many users want to introduce the SR technology to simplify network deployment and management
and
A. TRUE
B. FALSE
Answer: A
Question #:249
Segment routing (SR) is a protocol designed based on ( ) to forward data packet on a network
A. Source routing
B. Destination routing
C. Policy-based routing
D. Routing policy
Answer: A
Question #:250
Which of the following statement are true about the OSPF neighbor status
C. In the Exchange state, routers send DD packets that briefly describe link state information to each other
to describe the content of the local link state database (LSDB)
Answer: A C D
Question #:251
A. TRUE
B. FALSE
Answer: B
Question #:252
A. TRUE
B. FALSE
Answer: A
Question #:253
Segment routing-traffic engineering (SR-TE) is a new TE tunneling technology that uses SR as a control
protocol. All nodes of an SR-TE tunnel including the ingress and transit nodes, must be aware of the tunnel
and complete label distribution and forwardi
A. TRUE
B. FALSE
Answer: B
Question #:254
A. 20B
B. 32B
C. 60B
D. 64B
Answer: D
Question #:255
The DHCPv6 server adds the management address configuration flag (M) to an RA packet . If M is set to 1,
which of the following statements is true ?
C. The client needs to use stateful DHCPv6 to obtain other network configuration parameters.
D. The client needs to use stateless DHCPv6 to obtain other network configuration parameters.
Answer: A
Question #:256
As Shown in the figure, if Host A has ARP cauche of Host B, Host A can ping Host B?
A. TRUE
B. FALSE
Answer: B
Question #:257
A. TRUE
B. FALSE
Answer: B
Question #:258
A gateway must be configured for communication between a host and other hosts
A. TRUE
B. FALSE
Answer: B
Question #:259
An authentication router has been configured with two domain named “Area1” and “Area2” , following which
a user is created with the username “Huawei” and the password “hello” for authentication. Which domain does
this
A. Area1 domain
B. Area2 domain
C. default domain
D. default_admin domain
Answer: C
Question #:260
As Shown in the following figure, the switch configuration information is as follows. Which of the following
statement about the network and configuration is/are true?
Router A
aaa
Router B
aaa
B. Router A uses the user name "test1" and password "test1" to pass the interface authentication of Router
B
D. Router B uses the user name "test1" and password "test1" to pass the interface authentication of Router
A
Answer: A B C
Question #:261
A. True
B. False
Answer: A
Question #:262
You can run the "mkdir test" command on the Versatile Routing Platform ( VRP) to create a folder named
"test" in the sytem?
A. TRUE
B.
B. FALSE
Answer: A
Question #:263
A. The priority of the direct route is lower than that of the dynamic route
B. The priority of the direct route is lower than that of the static route
C. The administrator needs to manually configure the destination network and next-hop address for the
direct route
Answer: A D
Question #:264
When redundant links exist on a switching network, STP can be used to eliminate loops.
A. TRUE
B. FALSE
Answer: A
Question #:265
A. TRUE
B. FALSE
Answer: A
Question #:266
If the maximum number of an ACL rule is 12, by default, no number is specified when a new rule is
configured. What is the number allocated by the system to the new rule?
A. 13
B. 14
C. 15
D. 16
Answer: C
Question #:267
A. True
B. False
Answer: A
Question #:268
By default, it takes at least 30 seconds for an STP-enabled port to transition from disabled to forwarding?
A. TRUE
B. FALSE
Answer: A
Question #:269
After a device is reset, an interface card is hot swapped, or an interface card is reset, the saved MAC address
entries on the device or interface card are not lost
A. TRUE
B. FALSE
Answer: B
Question #:270
Which of the following commands line views exist on the Versatile Routing Platform
A. User view
B. System view
C. Protocol view
D. Interface view
Answer: A B C D
Question #:271
A. Hello
B. LSR
C. LSU
D. LSA
Answer: A B C
Question #:272
During device startup, the device selects a VRP version files depends on the configuration saved in the ( )
storage medium?
A. Flash memory
B. SD card
C. NVRAM
D. USB
Answer: A
Question #:273
Which of the following IPv6 addresses is/are multicast address(es) within the link range
A. FF02::1
B. FF02::2
C. FF12::1
D. FF12::2
Answer: A B
Question #:274
On Huawei switches, you can run the vlan batch commands to create multiple VLANs in batches
A. TRUE
B. FALSE
Answer: A
Question #:275
Reply from 10.0.0.2: bytes=56 Sequence=1 ttl=128 time=60 ms Reply from 10.0.0.2: bytes=56 Sequence=2
ttl=128 time=40 ms
2 packet(s) received
The Network Administartor can run the "ping" command on the AR G3 router to test the connectivity to
10.0.0.2. Wh/ich of the following statement is true about the command output?
Answer: A
Question #:276
A network administrator has been assigned the IP address segment 192.168.176.0/25, from which he/she must
allocate a subnet to support 20 users in the marketing department. Which IP subnet best supports this
requirements
A. 192.168.176.0/25
B. 192.168.176.0/30
C. 192.168.176.48/29
D. 192.168.176.96/27
Answer: D
Question #:277
Refer to the command output. what is the result of the shown command?
D. The command adjusts the save command in the user view to privilege level 3
E. The command adjusts the user view command privilege level to 3, and saves the configuration
F. The command adjusts the privilege level of a user to 3, and saves the configuration.
Question #:278
On the network shown in the following figure, all interface run OSPFv3. How many DRs exist on the
network?
A. 1
B. 2
C. 3
D. 4
Answer: A
Question #:279
The users who log on the router through Telnet are not permitted to configure IP address. What is the possible
reason
Answer: C
Question #:280
A trunk interface allows frames from multiple VLANs including VLAN 4096.
A. TRUE
B. FALSE
Answer: B
Question #:281
According to the configuration of the single-armed routing in the following figure, the administrator
department and finance department can communicate with each other even if proxy ARP is disabled on
subinterface of R1?
A. True
B. False
Answer: B
Question #:282
When the values of the M and O flags in the RA packet that a DHCPv6 client receives from a DHCPv6 server
are ( ), the DHCPv6 client uses DHCPv6 stateful autoconfiguration to obtain an IPv6 address and other
configuration information?
A.
A. 11
B. 10
C. 1
D. 0
Answer: A
Question #:283
A. TRUE
B. FALSE
Answer: B
Question #:284
According to the following configuration of an interface, if all the displayed IPv6 address are available, how
many global unicast address prefixes are advertised by the interface?
ipv6 address 2004::1/64 ipv6 address 2005::1/64 ipv6 address 2009::1/64 ospfv3 1 area 0.0.0.0
A. 1
B. 2
C. 3
D. 4
Answer: D
Question #:285
Refer to the configuration output, Which of the following statements regarding the configuration output are
correct?
Answer: A D
Question #:286
On the network shown in the figure, the ports connecting Switch A and switch B to hosts belongs to VLAN 10
and VLAN 20 respectively. The ports through which two switches are interconnected are trunk port, and the
PVID of the ports are 10 and 20 respectively. which of the following statement are true?
A. Host A and Host B belongs to different VLANs and cannot ping each other
C. When the data frames sent by the hosts are forwarded between switches, the frames are untagged
Answer: B C
Question #:287
A. Hello packet
Answer: A
Question #:288
Which of the following values of the Length/Type field in an Ethernet data frame indicates the PPPoE
discovery stage?
A. 0x8863
B. 0x8864
C. 0x0806
D. 0x0800
Answer: A
Question #:289
The authentication, authorization and accounting schemes and HWTACACS or RADIUS server templates
created or AR routers take effect only after being applied to a domain
A. TRUE
B. FALSE
Answer: A
Question #:290
The MPLS architecture consists of the control plane and forwarding plane. The following plane switches
lables and forwards packets
A.
A. TRUE
B. FALSE
Answer: A
Question #:291
After a network administrator enable the traceroute function on a router what is the value of the “TTL” field in
the IPv4 header of the first data packet sent by the router?
A. 0
B. 1
C. 254
D. 255
Answer: B
Question #:292
As shown in Figure, Host A and Host B cannot communicate with each other?
A. TRUE
B. FALSE
Answer: B
Question #:293
Which of the following statement about Length/Type = 0x8100 in an Ethernet data frame is/are true?
B.
C. The upper layer of the data frame must have a TCP header
D. The upper layer of the data frame must have a UDP header
Answer: A
Question #:294
NAPT uses the same public IP address but different port number to translate private IP addresses. Which
statement regarding the port number is correct
Answer: C
Question #:295
Which of the following types of routes can be used by a router to establish a routing table ?
A. Direct Route
B. Dynamic Route
C. Static Route
D. Aggregated Route
Answer: A C
Question #:296
The packets returned by the DHCP server to the DHCP client must be unicast packets.
A. TRUE
B. FALSE
Answer: A
Question #:297
When a switch running standard STP receives an inferior configuration BPDU through a port, it immediately
sends its own configuration BPDU through the port?
A. TRUE
B. FALSE
Answer: B
Question #:298
On the network shown in the figure, when planning traffic, the network administrator requires that the data
packet sent from host A to host B pass through G0/0/3 on the router, and the packets sent from host B to host
A pass through G0/0/4 on the router, which of the following command can be used to meed this requirement?
Answer: A C
Question #:299
If the EUI-64 address 78BC-FEFF-FFFE-EFAB is calculated based on a MAC address, what is the MAC
address
A. 7ABC-FEFE-EFAB
B. 78BC-FEFE-EFAB
C. 7ABC-FFFE-EFAB
D. 78BC-FFFE-EFAB
Answer: A
Question #:300
Which of the following port number is used by the FTP control plane
A. 21
B. 22
C. 23
D. 24
Answer: A
Question #:301
DHCPV6 clients must obtain both IPv6 addresses and other configurations from the DHCPv6 server.
A. TRUE
B. FALSE
Answer: B
Question #:302
A. 01-80-C2-00-00-00
B. FF-FF-FF-FF-FF-FF
C. 00-80-C2-00-00-00 D
D. 01-80-C2-04-05-06
Answer: A
Question #:303
A. Configuration of a router ID
Answer: B C D
Question #:304
D. If the configuration information changes, for example the DNS server address changes, the administrator
only needs to modify the configuration information on the DHCP server, facilitating unified
managemnet
Answer: B C D
Question #:305
The DHCP server function is enabled on an interface of a route. What gateway address will be obtained by the
DHCP CLIENT?
Interface GigabitEthernet0/0/1
A. 11.0.1.1
B. 11.0.1.100
C. 11.0.1.254
D. 11.0.1.255
Answer: C
Question #:306
All interface on a router running OSPF must belong to the same area
A. TRUE
B. FALSE
Answer: B
Question #:307
Which of the following statements is true about the alternate port in RSTP?
A. An Alternate port acts as a backup of the designated port and provides a backup path from the root
bridge to the related network segment.
B. An Alternate port acts as a backup of the root port and provides a alternate path from the designated
bridge to the root bridge.
C. An alternate port does not forward user traffic but learns MAC address.
Answer: B
Question #:308
Which of the following methods is not used for logging in to the VRP system ?
A. Telnet
B. SSH
C. Web
D. Netstream
Answer: D
Question #:309
Which of the following is the format of application data after being processed by the data link layer
A. PDU
B. Packet
C. Frame
D. Segment
Answer: C
Question #:310
A. 1
B. 2
C. 3
D. 4
Answer: C
Question #:311
Segment routing (SR) can be used to define an explicit path. Nodes on a network only need to maintain SR
information to deal with the real time and rapid development of services. What are the characteristics or SR?
A. SR supports smooth evolution of the existing network by extending protocol (such as IGPs)
B. SR supports both the controller’s centralized control mode and forwarders distributed control mode,
C. SR uses the source routing technology to support fast interaction between the network layer and upper-
layer applications
D. SR uses IP forwarding, and router do not need to maintain another label forwarding table
Answer: A B C
Question #:312
The Output of the "display vlan" command o SWA is as follows. Which of the following interface can forward
data packets with VLAN ID 40 untagged mode?
[Huawei]display vlan
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
10 common UT:GE0/0/1(U)GE0/0/2(U)
20 common TG:GE0/0/1(U)GE0/0/5(U)
30 common TG:GE0/0/1(U)
40 common UT:GE0/0/5(U)GE0/0/2
A. GE0/0/3
B. GE0/0/4
C. GE0/0/5
Answer: C
Question #:313
On a serial interface you can configure a static route by spending the next hop address or outbound interface ?
A. TRUE
B. FALSE
Answer: A
Question #:314
Which of the following technologies is used by the shared media network to forward data?
A. CSMA/CD
B. CDMA/CD
C. CSMA/AC
D. TDMA/CD
Answer: A
Question #:315
When configuring the PPP auhentication method as PAP, which of the following operations are necessary
A. Add the user name and password of the authenticator party to the local user list.
B. Configure the encapsulation type of the interface connected of the peer as PPP
D. On the authenticated end, configure the user name and password that are sent to authentidcator
Answer: A B D
Question #:316
Static NAT can only implement one-to-one mapping between private and public addresses
A. TRUE
B. FALSE
Answer: A
Question #:317
A.
A. True
B. False
Answer: B
We help you pass any IT / Business Certification Exams with 100% Pass Guaranteed or Full Refund. Especially
Cisco, CompTIA, Citrix, EMC, HP, Oracle, VMware, Juniper, Check Point, LPI, Nortel, EXIN and so on.
We prepare state-of-the art practice tests for certification exams. You can reach us at any of the email addresses listed
below.
Sales: [email protected]
Feedback: [email protected]
Support: [email protected]
Any problems about IT certification or our products, You can write us back and we will get back to you within 24
hours.
1 A network administrator has captured a data frame in the network with the destination MAC address of 01-00-5E-A0-BI-C3. The correct statement about this MAC address s Q.
❑ A It is a unicast MAC address
❑ B. It is a broadcast MAC address
❑ C. It is a multicast MAC address (Right Answers)
❑ D. It is an illegal MAC address
Answer: B
3. The 1Py4 address of the host is 200_200_200_201/30_ Which host with the following IPv4 address and its communication do not need to be forwarded by the muter?
❑ A 200 200 200.1
❑ B. 200 200 200_202 (Right Answers )
❑ C. 200 200 200 200
❑ O. 200 200 200 203
Answer: B
4_ If the Ethernet data frame is Lengthaype=0x0806, which of the ft:Mowing statement is correct? (Multiple Choice)
❑ A. This data frame is an Ethernet H frame. (Right Answers)
❑ B. This data frame is an IEEE 802.3 frame
❑ C. The source MAC address of this data frame must not be FFFF-FFFF-FFFFF (Right Answers)
❑ D The destination MAC address of this data frame must be FFFF-FFFF-FFFFF.
Answer: AC
5. When a router enabled with Proxy ARP function receives an ARP request packet and finds that the requested IP addr not its own, what actions are performed? (Multiple Choice)
❑ A If there is a route to the destination address, send its own MAC address to the ARP requester (Right Answers )
❑ B. Discard the message
❑ C. Broadcast ARP request message
❑ D. Find if there is a route to the destination address or not (Right Answers )
Answer: AD
6. Which of the fallowing storage media are commonly used by Huawei routers? (Multiple Choice)
❑ A. SDRAM (Right Answers)
❑ B. NVRAM (Right Answers)
❑ C_ Flash (Right Answers )
❑ D_ Hard Disk
❑ E. SD Card (Right Answers )
Answer: ABCE
7 The Vag operating system commands are droded into four access nanMnro Innl. canaqurasan Wan and management level. Much level can run various busirress configurabon commands but cannot operate te file system ,
▪ Access level
D a. Mantonere level
coDevratian 'Teo might Answers)
❑ D. Management level
/NSW C
8 On the VRP interface, you cannot use the command delete or unreserved vrpcfg zip to delete files. You must empty them in the recycle bin to delete files comretely.
OA. TRUE
OB FALSE (Right Answers)
Answer: F
9 The switch MAC address table is existing as follows. which of the following statements is correct?
(fluawei>ictim mac-address
RAC address table of slot 0:
*AC Address VLAM/ PtVLAN CEVLAN Port Type (17R
VS1/SI
Ilk7.•1tn1-!
SON -0811 -0b49 I - Et h0/0/3 stati.
Total amtchias items on slot 0 displayed =
*AC address table of slot C:
Answer: 13
10 As shown in the figure below, the switch starts the STP protocol. When the network is stable, which of the following statements are correct? (Multiple Choice)
Answer: BC
11 The STP protocol is enabled on both switches shown in the figure below_ An engineer made the following conclusions on this network_ Do you think what is the correct conclusion? (Multiple Choice)
❑ A The GO/0/2 port of SWB is stable in the Forwarding state (Right Answers )
❑ B The GO/N2 port of SWA is stable in the Forwarding state (Right Answers)
❑ C Both pods of SWB are designated pods_
❑ D The GO/0/3 part of SWA is stable in the Forwarding state (Right Answers )
❑ E Both pods of MA are designated pods (Right Answers)
Answer: ABDE
12. Compared to STP protocol, which kind of port role is added in RSTP protocol? (Multiple Choice)
El A. Alternate port (Right Answers)
I=1 B. Backup port (Right Answers)
I=1 C. Root port
❑ D. Designated port
Answer: AB
13 As shown in the figure, the two switches use the defaut parameters to run STP On Switch A the configuration command SIP root primary is used. On the switch B the configuration command SIP priority 0 is used. Which of the following
,
ports will be blocked
E0
EO 0 3 GO 0 1
GO 0 1
Answer: A
14. Which of the following parameters does not the configuration BPDU packet of the STP protocol?
❑ A. Port ID
I=1 B. Bridge ID
❑ C. VLAN ID (Right Answers)
❑ D. Root ED
Answer: C
15. By default, how many seconds are the Forward Delay of STP protocol?
I=1 A. 20
I=1 B. 15 (Right Answers )
El C. 10
1=1 D. 5
Answer: B
16. Which of the following parameters are used in the switched network that runs the STP protocol when performing spanning tree calculations? (Multiple Choice)
7 A. Root path cost (Right Answers)
❑ B. Port ID (Right Answers)
O C. Bridge ED (Right Answers)
E D. Forward Delay
Answer: ABC
17. In the STP protocol, assume that at switches are configured with the same piton-Ey. The MAC address of switch 1 s 0.0-en-fc-0600-40, and the MAC address of switch 2 is 011.04,00-00-10, the MAC address of switch 3 e. 00-e0-fc-00-00-
20, and the MAC address of switch 4 is 00-e0-fc-00-00-80, then the root switch sheuM be ()
17 A. Switch 1
❑ 13_ Switch 2 (Right Answers)
El C. Switch
El a Switch 4
Answer: B
18, The network shown in the figure below, the MAC address of the switch has been marked Enter the command sip root secondary on the SW0 switch. Which of the following switches become the root bridge of this network,
SWA SWB
00-01-02-03-04-AA 00-01-02-03-04-BB
Answer: 0
19. Both the two switches shown in the following figure have SIP enabled. Which port will eventually be in the Blocking state?
SWA SWB
4096 00-01-02-03-04-AA 32768 00-01-02-03-04-BB
G 0/0/3
G 0/0/2
Answer: ❑
20 The network as shown in the following figure, after the OSPF protocol is stable, what is the neighbor status of Router A and Router B?
Router A Router B
Router ID 10.0.1,1 Router ID 10.0.2.2
Priority=255 Priority=0
Router C
Router ID 10.0.3.3
Priority=0
❑ A 2-way
❑ B. Down
❑ C FuiE (Right Answers )
❑ D. Attempt
Answer: C
21. In the network shown below, which of the following commands can be entered in the router to enable Host A to ping through Host B? (Multiple Choice)
GO/0/1
16.612.2/30
OST A Rou r A
Gl
11.0.12.1/30 immiumml
10.0i.1.1/30 0
W:10.0.12.2
1-Lavin°
G0/0/2
10.0 1
HOST B
the 10.0.12.5/
O A. Router A : ip route-static 10.0.12.5 255.255.255.252 11.0.12.1 Router B : ip route-static 10.0.12.1 255.255.255.252 11.0.12.2
O B. Router A : ip route-static 0.0.0.0 0.0.0 11.0.12.1 Router B : ip route-static 0.0.0.0 0.0.0 11.0.12.2
I=1 C. Router A : ip route-static 10.0.12.5 255.255.255.252 11.0.12.2 Router B : ip route-static 10.0.12.1 255.255.255.252 11.0.12.1 (Right Answers )
O D. Router A : ip route-static 0.0.0.0 0.0.0 11.0.12.2 Router B : ip route-static 0.0.0.0 0.0.0 11.0.12.1 (Right Answers)
Answer: CD
22. The network as shown in the following figure, the following configurations exist on the Router A. Which of the following statements are correct? (Multiple Choice)
ip route-static 10.0.2.2 255.255.255.25510.0.12.2
ip route-static 10.0.2.2 255.255.255.255 10.0.21.2 preference 70
GO/0/1
0.0.12.1/24 __10,012.2/24 I oopback 0
10.0.2.2/32
10.0,21.1/24 10.0.21.2/2
G0/0/2 Router B
❑ A. The NextHop that reaches 10.0.2.2 in the routing table of Router A is 10.0.12.2. (Right Answers)
O B. If the GO/0/1 port is Down, the route that Router A reaches 10.0.0.2 is changed to 10.0.21.2. (Right Answers)
❑ C. The NextHop that reaches 10.0.2.2 in the routing table of Router A is 10.0.21.2.
0 D. If the GO/0/2 port is Down, the route that Router A reaches 10.0.0.2 is changed to 10.0.12.2.
Answer. AB
23. Which of the following OSPF versions are suitable for IPv6?
El A. OSPFv2
1:1 B. OSPFv3 (Right Answers)
C] C. OSPFv4
D D. OSPFv1
Answer: B
24 T he network as shown in the following figure, which of the following commands can enable RouterA to forward a packet with the destination IP address of 19 00 32 (Multiple Choice)
Loopback0 10.0.2.2/32
10.0.12.1/24 10.0.12.2/24
GO/0/1 O
Router A Router B
O a
O
nr
3.3
/33
Router C
Loopback0 10_0.3.3/32
❑ A ip route-static 10.03.3 255 255 255 255 10 0.1 22 (Right Answers)
❑ B ip route-static 10 0.2.2 255 255255 255 100_12 2 ip route-static 10 03 3 255255.255 255 10 0 2 2 (Right Answers)
❑ C. ip route-static 0.0 0.0 0.0.0.0 10 0 122 (Right Answers )
❑ 0 ip route-static 10 0.33 255 255255255 1002 2
Answer: ABC
25. Which of the following about the statement of static routing are incorrect?
❑ A. Manual configuration by network administrator
❑ B. Inter-route information needs to be exchanged between routers (Right Answers)
❑ C. Can not automatically adapt to changes in network topology
❑ D. Low system performance requirements
Answer: B
26. Which of the following commands can be used to check whether OSPF has correctly established neighbor relationships?
❑ A. display ospf neighbor
❑ B. display ospf brief
❑ C. display ospf peer (Right Answers )
❑ D. display ospf interface
Answer: C
27 For multiple paths to the same destination network, the router needs to select by comparing the size of the Cost value_ If the value of the Cost is the same, then select according to the size of the Preference value.
❑ A. True
CO.False (Right Answers)
Answer: B
28. As shown in the figure below ; Host A and Host B cannot communicate.
HOST A HOST B
IP: 10.0.12.1/30 IP: 10.0.12.2/24
MAC: MAC-A MAC:MAC-B
❑ A. True (Right Answers)
❑ B False
Answer: A
29 For multiple paths to the same destination network, the router needs to select by comparing the size of the Preference value_ If the Preference is the same, then select according to the size of the Cost value.
❑ A True (Right Answers)
❑ B False
Answer: A
30. The routing table consists of multiple elements. What is wrong with the following statement?
Answer: B
Answer: BC
32. ip route-static 10_0.2.2 255255/55.25510.0.12.2 preference 20, about this command, which is the correct statement? (Multiple Choice)
❑ A. The route can guide the data packets forwarding with the destination IP address of 10.0.2.2. (Right Answers)
❑ B. The route can guide the data packets forwarding with the destination IP address 10.0.12.2.
❑ C. The priority of the route is 20 (Right Answers)
❑ D The NextHop of the route is 10.0.12.2 (Right Answers)
Answer: ACD
33. The network as shown in the following figure, when the network administrator performs traffic planning, it is expected that the packets sent by Host A to Host B will be connected to G0/0/3 interface between the routers. The packets sent by
Host B to Host A go pass the G0/0/4 interface between routers Which of the following commands can implement this requirement, (Multiple Choice)
0.0.122/30
HOST A
11.0,2-1
19: 10.0.12.1/30 /
OW:10.0.112
IP: 10.0.12.5/30
10.0.126
❑ A_ Router A p route-static 10 0.12.5 255 255 255 252 11.0 12.2 Router B ip route-static 10.0.12 1 255255255252 11012 5 (Right Answers)
❑ B Router A p route-static 0 0 0.0 0.0.0.0 11.0.12 6 Router B ip route-static 0 00 0 0.0.0.0 11 0.12.1
❑ C. Router A p route-static 10.0.12 5 255255255252 11 0.12_6 Router B ip route-static 10 0 12 1 255 255 255 252 11 0 12.1
❑ D. Router A p route-static 0 0.0 0 0 0.0 0 11.0 12 2 Router B ip route-static 0.0.0.0 0.0.0.0 11_0.12.5 (Right Answers)
Answer: AD
34. If the IP address requested by the DHCP client is already occupied, which packet will the DHCP server use as the response?
❑ A. DHCP ACK
❑ B DHCP RELEASE
❑ G. DHCP NAK (Right Answers)
❑ D. DHCP DISCOVER
Answer: C
Answer: B
36. Which DHCP message does the DHCP client send when it wants to leave the network?
❑ A. DHCP DISCOVER
❑ B. DHCP RELEASE (Right Answers)
DHCP REQUEST
• DHCP ACK
Answer: B
37 Huawei devices can be managed using the Telnet protocol. Which of the following statements is correct about this management function?
❑ A The port number used by Telnet defaultly is 22, which cannot be modified
❑ B. Telnet must enable the VTY interface, and the maximum is 15 (Right Answers)
❑ C. Telnet does not support authentication based on username and password
❑ D. Telnet does not support deploying ACLs to increase security.
Answer: B
38 As shown, the topology and the configuration on the switch interconnect pod, you can determine that the data frame labeled as VLAN 10 can be forwarded normally between the two switches_
GEO 1 GE 1
LSW1 LSW2
[LSWIlinterface GigatitEthemet0/0/1
[LSW1-Gigabitatiemet0/0/1]Port link-type trunk
(LSW1-GigabitEttitunet0/0/11eort trunk pvid vlan 20
[LSW1-GigabitEthernet0/0/111kort trunk allow-pass Nan 10
I
ILSW2jinterface GigabitEthernet0/0/1
ILSW2-GigabitEthernet0/0/1Wort link-type trunk
f LSW2-GigabitEthernet0/0/11Nart trunk pvid vlan 10
(LSW2-GigabitEthernet0/0/11Port trunk allow -pass Wan 10
❑ A True
❑ B- False (Right Answers)
Answer: B
30 The output information of a port of the switch is as follows What is wrong with the following statement?
interface GigabitEthernet0/0/1
port link-type trunk
port trunk pvid vlan 100
port trunk allow-pass vlan 100 200
❑ A. tithe data frame carries a VLAN TAG of 200, the switch strips the VLAN TAG and sends out (Right Answers)
❑ B. If the port receives a data frame without VLAN TAG, the switch needs to add VLAN TAG100.
❑ C The link type of the port is Hybrid type
E D. If the data frame carries a VLAN TAG of 100, the switch strips the VLAN TAG and sends out.
Answer: A
40 Which information of the data frame is judged by the VLANIF interface to perform Layer 2 forwarding or Layer 3 forwarding?
❑ A. Destination MAC (Right Answers)
❑ B Source IP
❑ C. Destination pod
❑ D Source MAC
Answer: A
41 Packets forwarded between two routers must not carry VLAN TAG.
❑ A True
❑ B False (Right Answers )
Answer: B
42. The Priority field in the VLAN tag identifies the priority of the data frame. What is the priority range?
❑ A. 0-15
❑ EL 0-63
❑ C. 0-7 (Right Answers )
❑ D. 0-3
Answer: C
43. What is the characteristic of port-based VLAN partition?
❑ A. Add a VLAN tag to the data frame based on the lP address carried in the packet.
❑ B. Assign the VLAN ID according to the protocol type and encapsulation format of the data frame.
❑ G. The host moving location no need to reconfigure the VLAN
❑ D. The host moving location needs to reconfigure VLAN (Right Answers)
Answer: D
44. The Protocol field in the PPP frame format is OxC223, indicating that the protocol is:
❑ A. CHAP (Right Answers )
❑ B. PAP
❑ C. NCP
❑ D. LCP
Answer: A
45 The configuration information of a router is as follows. Which combination of wernarne and password used by the peer router can enable PPP channel associated to complete authentication?
Answer: B
46. Which method does the PPPoE client use to send PADI packets to the Server?
❑ A. Broadcast (Right Answers)
❑ B. Unicast
❑ C. Multicast
❑ D. Anycast
Answer: A
47 The network shown in the following figure requires the network where the host is located to access the Internet through Easy IP. Which of the following ACL5 should be used on the 00/0/3 interface of the muter?
Answer: 0
48 The configuration information of a router is as follows Which of the following statement is correct? (Multiple Choice)
ISOM
authent i cal ien..schtme default.
authentication-scheme huawei
authentication-mode radius
authorization-scheme default
authorisation-scheme huawei
accounting-scheme•, defnult
domain default
domain default_admin
domain huawei
authentication-schema huawei
authorization-scheme huawei
local-user huawei password cipher 1.23956
local-user huaweitthuawei password cipher GS41321.
ke
❑ N The domain which domain name is huawei does not use the accounting scheme (Right Answers)
❑ B. if the username huawei is used for authentication, the password needs to be 654321.
❑ C. The authorization mode used by the domain which domain name is huawei is local authorization. (Right Answers)
❑ D. The authentication mode used by the domain which domain name is huawei is local authentication.
Answer: AC
49. The IKE protocol is used to establish an SA for IPsec auto-negotiation, which can support identity authentication when the address of the initiator of the negotiation changes dynamically
❑ A True (Right Answers)
❑ B. False
Answer: A
50. By default, in the SNMP protocol, which port number is used by the proxy process to send an alarm message to the NMS,
❑ A 163
❑ B. 161
❑ C 162 (Right Answers)
❑ D. 164
Answer: C
51. If the result of the packet matching ACL is "reject", the packet is finally discarded.
❑ A. True
❑ B. False (Right Answers)
Answer: B
52. In terms of security, [Psec tunnel mode is superior to [Psec transport mode.
❑ A. True (Right Answers)
❑ B. False
Answer: A
53. What is the status of the OSPFv3 adjacency relationship after it is established?
❑ A. Loading
O B. 2-way
O C. Full (Right Answers)
❑ D. Down
Answer: C
54. The network as shown in the following figure, when OSPFv3 is enabled on all interfaces, Router A and Rcuter B cannot establish adjacencies.
Fe80::fe03:e24f/64 Fe80::fe03:c3fb/64
-1
30011 2:1/64 300112;1/64 1
GO/0/1
Router B Router A
Router ID 10.0.2.2 Router ID 10.0.2.2
O A. True (Right Answers)
0 B. False
Answer: A
55. Which of the following fields are fields that exist in both 1Pv6 and [PV4 headers? (Multiple Choice)
O A. Source Address (Right Answers)
El B. Version (Right Answers)
O C. Destination Address (Right Answers)
O D. Next Header
Answer: ABC
Answer: B
57. By defauFt, how many seconds is the period of OSPFv3 HELLO packet sending on the Ethernet link?
O A. 30
O B. 10 (Right Answers)
O C. 20
El D. 40
Answer: B
58. Which of the following fields does the MPLS header include? (Multiple Choice)
❑ A. Label (Right Answers)
▪ EXP (Right Answers)
❑ TTL (Right Answers)
❑ Tas
Answer: ABC
59 SR (SegmentRouting) defines a destination address prefix/node and adjacency in the network as segments, and assigns SIDS (Segment 10s) to the segments. By performing an unordered list of Adjacency SIDS and Prefix/Node SIDS
(destination address prefixes/node segments), a forwarding path is obtained
❑ A True
❑ 11 False (Right Answers)
Answer: B
60 The ARP protocol can resolve the MAC address of the target device according to the destination IP address, thereby, to map the link layer address and the IP address
❑ A True (Right Answers)
❑ B. False
Answer: A
61 The Traced diagnostic tool records the 0 of each ICMP TTL timeout message so that the user can be provided with the IP address of the packet when it arrives at the destination_
❑ A Destination port
❑ B. Source port
❑ C Destination IP address
❑ D. Source 1F1 address (Right Answers)
Answer: D
€2. VLSM can expand any IP network segment ; including Class D addresses.
❑ A. True
❑ B. False (Right Answers)
Answer: B
63_ Which fields in the IPv4 header are related to sharding? (Multiple Choice)
❑ A_ Fragment Offset (Right Answers)
▪ Flags (Right Answers)
❑ G. Tit
❑ IT identification (Right Answers)
Answer: ABD
64. The pwd and dir commands in the VRP operating platform can view the file information in the current directory.
❑ A_ True
❑ B. False (Right Answers)
Answer: 13
65. The output information of a router is as follows. Which of the following statement is correct? (Multiple Choice)
<Huawei>display startup
MainBoard:
Startup system software: flash:/AR2220E-V200R007COOSPC600.cc
Next startup system software: flash:/AR2220E-V200R007COOSPC600.cc
Backup system software for next startup: null
Startup saved-configuration file: flash:/vrpcfg.zip
Next startup saved-configuration file: flash:/backup.zip
Startup license file: null
Next startup license file: null
Startup patch package: Null
Next startup patch package: null
Startup voice-files: null
Next startup voice-files: null
O A. The currently used VRP version file is the same as the VRP file used for the next startup. (Right Answers)
O B. The currently used VRP version file is different from the VRP file used for the next startup.
O C. The currently used configuration file is different from the one used for the next startup. (Right Answers)
O D. The currently used configuration file is the same as the one used for the next startup.
Answer: AC
66. For a switch running STP, the port can be directly converted to the Disabled state in any state.
❑ A. True (Right Answers)
❑ B. False
Answer: A
67. Which of the following MAC addresses will not age? (Multiple Choice)
❑ A. Dynamic MAC address
❑ B. Black hole MAC address (Right Answers)
❑ C. Static MAC address (Right Answers)
❑ D. Port MAC address
Answer: BC
Answer: A
69. Which port of the following switches is blocked as shown in the following figure?
SVVA SWB
4096 00-01-02-03-04-AA 32768 00-01-02-03-04-BB
SWC
32768 00-01-02-03-04-CC
❑ A. GO/0/2 of SWC
❑ B. GO/0/1 of SWC (Right Answers)
❑ C GO/0/3 of SWB
❑ D. GO/0/3 of SWA
Answer: B
70. As shown in the following figure, all hosts can communicate normally. What is the correct relationship between the SWBMAC address and the port?
G 0/0/3 G 0/0/3
SA SB
G 0/0/
G /0/2 G 0/0/1
Answer: A
71. A switch running STP protocol will send TCN BPDUs only when a port on the switch fails.
❑ A. True
❑ B. False (Right Answers)
Answer: B
72. How many bits of the Port ED total length in the spanning tree protocol?
El A. 16 (Right Answers)
El B. 4
El C. 2
El ID 8
Answer: A
73. As shown in the figure, the correct description about this network topology is 0.
VA
Answer: D
74. Which of the following statements about the Backup port in the RSTP protocol is correct?
O A. Backup port as a backup of the designated port, providing another backup path from the root bridge to the corresponding network segment (Right Answers)
0 B. Backup port not only forwards user traffic but also learns MAC address
C C. Backup port does not forward user traffic but learns MAC address
0 D. Backup port provides another switchable path from the designated bridge to the root as the backup port of the root port
Answer: A
75. A network consisting of switches does not have STP enabled. A Layer 2 loop must occur.
❑ A. True
❑ B. False (Right Answers)
Answer: B
76_ When a port running the standard STP protocol receives a suboptimal BPDU, it immediately sends its own configuration BPDU from this port_
❑ A. True (Right Answers)
❑ B. False
Answer: A
77 As shown in the following figure, all routers run OSPF protocol_ The top of the link is the size of the Cost value_ What is the path of the RA to the network 10 0 0 NB'?
'
1°
10.0.0.0/8
Router Router D
Router C
❑ A. A-B-D
❑ B. PA can not reach 10.0.0.018
❑ C A-D
❑ D A-C-D (Right Answers)
Answer: D
TB Which of the following statements about OSPF neighbor status is correct? (Multiple Choice)
❑ A. In the Exchange state, the routers send each other a DO packet containing the summary of the link state information to describe the content of the local LSDB (Right Answers)
❑ B. The master-sinve relationship of OSPF is formed in the ExStarl state (Right Answers)
❑ C_ After the router LSDB is synchronized, it is converted to the Full state_ (Right Answers)
❑ D_ The serial number of the OD packet is determined in the Exchange state_
Answer: ABC
79. On the network shown in the following figure, the administrator wants Router A to use static mutes to send packets to Router B priority through GO/0/1 Which command can be used to meet this requirement'
GO/0/1
10.0.12.1/24 10.0.12 2/24 Loopback 0
O 10.0.2.2/32
10.0.21.1/24 10.0.21.2/2
Router A GO/0/2 Router B
❑ A. ip mute-static 100 22 255.255.255.255 10 0.12 2 ip route-static 10.0 22 255.255.255.255 10 0212 preference 40
❑ B. ip route-static 10.0.2.2 255.255 255 255 10.0.122 ip route-static 10.0.2.2 255.255.255.255 10.0.212 preference 70 Might Answers)
❑ C ip route-static 10 0 22 255.255.255.255 100_12.2 ip route-static 10 0 22 255.255.255.255 10 0212
▪ ip route-static 10 02 2 255 255 255 255 10 0.12 2 preference 70 ip route-static 10 0 2.2 255.255.255.255 10.021.2
Answer: B
Answer: C
81 Network structure and OSPF partition as shown in the figure, except for R1, routers R2, R3 and R4 are ABR routers of OSPF.
Areal R4 Area2
❑ A True
❑ B. False (Right Answers)
Answer: B
82[R1] ospf
[R1-ospf-I area I
[R1-ospf-1-area-00 0 1] netted< 10 0.12 0 0 0 0255
As shown in the configuration, the administrator has configured OSPF on R1, but R1 cannot learn the mutes of other routers. The possible reason is () (Multiple Choice)
❑ A This router is not configured with authentication, but the neighbor router is configured with authentication (Right Answers )
❑ B The OSPF process 10 is not configured when this router is configured_
❑ C The area ID configured by this router is different from the area ID of its neighbor router (Right Answers )
❑ B. This router does not announce the network connecting neighbors when configuring OSPF (Right Answers)
Answer: ACID
83. Which of the following data packets is the OSPF protocol encapsulated in?
❑ A. IP (Right Answers)
❑ B. liTTP
❑ C. UDP
❑ D. TGP
Answer: A
84 Whichi of the following about the default route is correct! (Multiple Choice)
❑ A The default route can only be manually configured by the administrator.
❑ B In the routing table the default route appears as a route to the network 0 0 0 0 (the mask is also 0 0 00) (Right Answers)
❑ C There must be a default route in the routing table of any router
❑ 0 If the destination address of the packet cannot match any destination address of the routing table, the packet will be forwarded by selecting the default route (Right Answers)
Answer: BO
85 When configuring a static mule on a broadcast interlace, you can configure a static route by specifying the next hop address or outbound interlace_
❑ A True
❑ B False (Right Answers)
Answer: B
86. Which of the following attributes cannot be used as a parameter to measure Cost?
111 A. Delay
111 B. sysname (Right Answers)
El C. Hop count
❑ D. Bandwidth
Answer: B
87. As shown in the following figure. Router A and Router B establish an OSPF neighbor relationship. The OSPF process ID of Router A is 1 and the area ID is O. Which of the following methods can enable Router B to obtain the route of the
nehvork segment where Host A is located? (Multiple Choice)
10.0.12.1/24 10.0.12.2/24
GO/0/1
Rou er A Router B
is° E;
0
lj IP:192.168.1.1/24
GW:192.168.1.2
HOST A
0 A ospf t area 0.0.0.0 network 192.168.1.00.0.0.255 0 (Right Answers)
FA B ospf 1 import-route direct 0 (Right Answers)
P C. ospf 1 area 0.0.0.0 network 192168.0.00.0.255 255 (Right Answers)
❑ D ospf 1 area 0 0 0 0 network 192 168 1.2 0.0.0.0 0 (Right Answers )
Answer. ABCD
88. Which of the following fields does not contain in HELLO packets of OSPF protocol?
El A. Neighbor
11] B. sysname (Right Answers)
CI C. Hello Interval
CI D. Network Mask
Answer: B
89. What are the roles of OSPF DR and BDR? (Multiple Choice)
❑ A. Reduce the number of adjacencies (Right Answers)
111 B. Reduce the type of OSPF packets
C] C. Reduce the time it takes to establish adjacency
CI D. Reduce the number of exchanges of link state information (Right Answers)
Answer: AD
Answer: AC
91. A company network administrator wants to be able to remotely manage branch network devices. Which of the following protocols will be used?
❑ A. VLSM
❑ B. Telnet (Right Answers)
❑ C. RSTP
❑ D. CIDR
Answer: B
92. Which of the following message types does DHCP contain? (Multiple Choice)
❑ A. DHCP ROLLOVER
❑ B. DHCP DISCOVER (Right Answers)
❑ C. DHCP REQUEST (Right Answers)
❑ D. DHCP OFFER (Right Answers)
Answer: BCD
Answer: A
95. What should do when the Access port sends a data frame?
❑ A. Replace VLAN TAG forwarding
❑ B. Stripping TAG forwarding (Right Answers)
❑ C. Mark PVID forwarding
❑ D. Send a message with TAG
Answer: B
96. If the configuration information of a port on a switch is as follows, when this port sent the data frames of which VLAN, the VLAN TAG is stripped?
interface GigabitEthernet0/0/1
port hybrid tagged vlan 2 to 3 100
port hybrid untagged vlan 4 6
❑ A. 4,5,6
❑ B. 4,6
❑ C. 1,4,6 (Right Answers )
❑ D. 1,4,5,6
Answer: C
97. The configuration information of a port on the switch is as follows, when the port sends the data frame of which VLAN TAG is carried, the VLAN TAG is stripped?
*
interface GigabitEthernet0/0/1
port link-type trunk
port trunk pvid vlan 10
port trunk allow-pass vlan 10 20 30 90
❑ A 10 (Right Answers)
❑ B 20
❑ C. 30
❑ D. 40
Answer: A
98. When a port of the switch sends a data frame carrying the same VLAN TAG and PVID, it must strip the VLAN TAG forwarding.
❑ A. True
❑ B FaEse (Right Answers)
Answer: B
99 As shown in the following figure, Router A uses manual link aggregation and adds GO/0/1 and G0/0/2 ports to aggregation group 1 The incorret statement about the status of Router A aggregation port 1 is:
O C0/0/2 O
Router A Router B
❑ A_ Only shut down GO/0/2 of Router B, Eth-Trunk 1 protocol up
❑ Tum off GO/0/1 and GO/0/2 ports on Router B at the same time, Eth-Tmnk 1 protocol up (Right Answers)
❑ a Only shut down GO/0/1 of Router B, Eth-Trunk 1protocol up
❑ B. Turn off GO/0/1 and G0/0/2 ports on Router B at the same time, Eth-Trunk 1 protocol down
Answer: B
1 00. In the network shown in the figure the correct description of the following is:
5 WA RTA SWB
HUB SWC
❑ A. The network between RTA and SWC is the same collision domain.
❑ B. The network between SWA and SWC is the same broadcast domain. (Right Answers)
❑ C. The network between SWA and SWC is the same collision domain. (Right Answers)
❑ D. The network between SWA and SWB is the same broadcast domain.
Answer: BC
1 09. When NAT uses a dynamic address pool, addresses in the address pool can be reused, that is, the same IP is mapped to multiple intranet (Ps at the same time
❑ A True
❑ 11 False (Right Answers)
Answer: B
102. Which of the following values is used in the LengthfType field of the Ethernet data frame, indicating that the packet is in the PPPoE discovery phase?
❑ A. 0x0800
❑ B. 0x8863 (Right Answers )
❑ C. 0x8864
❑ D. 0x0806
Answer, B
103. Regarding PPP configuration and deployment ; which of the following statement is correct?
❑ A. PPP does not support mutual authentication
❑ B. PPP cannot modify keepalive time
❑ C. PPP cannot be used to deliver IP addresses.
❑ D. PPP supports CHAP and PAP authentication modes. (Right Answers )
Answer: D
104. On the Huawei device, if AAA authentication is used for authorization, when the remote server does not respond, authorization can be performed from the network device side.
❑ A. True (Right Answers)
0 B. False
Answer: A
105. As shown in the network, the configuration information of Router A is as follows. Which of the following statement is wrong?
acl number 2000
rule 5 deny source 200.0.12.0 0.0.0.7
rule 10 permit source 200.0.12.0 0.0.0.15
interface GigabitEthernet0/0/1
traffic-filter outbound acl 2000
Router A
❑ A. The host with the source FP address of 200.0.12.2 cannot access the Internet.
❑ B. The host with the source EP address of 200.0.12.6 cannot access the Internet.
❑ C. The host with the source IP address of 200.0.12.8 cannot access the Internet. (Right Answers )
❑ D. The host with the source IP address of 200.0.12.4 cannot access the Internet.
Answer: C
106. Based on ACL rules, which of the following types can an ACL be classified into? (Multiple Choice)
❑ A. Layer 2 ACL (Right Answers)
❑ B. User ACL
❑ C. Advanced ACL (Right Answers)
❑ D. Basic ACL (Right Answers)
Answer: ACD
107. The Management Information Base MIB is a virtual database that is stored on the NMS.
O A. True
O B. False (Right Answers)
Answer: B
108. As shown in the following figure, what is the scope of AH protocol authentication in IPsec tunnel mode?
Answer: D
109. The ACL on the AR G3 series router supports two matching sequences: configuration order and automatic sorting.
D A. True (Right Answers)
[11 B. False
Answer: A
110. The requested node multicast address consists of the prefix FF02::1:FF00:0/104 and the last 24 bits of the unicast address.
0 A. True (Right Answers)
O B. False
Answer: A
111. How many seconds is the period of the OSPFv3 HELLO packet on the P2P link by default?
O A. 10 (Right Answers)
El B. 20
O C. 30
El D. 40
Answer: A
112. The multicast address FF02::2 indicates all routers in the link-local range.
0 A. True (Right Answers)
❑ B. False
Answer: A
113. The basic header length of an IPv6 message is a fixed value.
❑ A. True (Right Answers)
❑ B. False
Answer: A
114. IPv6 address 2001: ABEF 224E: FFE2: BCCO: CDOO: DDBE 8D58 cannot be abbreviated.
❑ A. True (Right Answers)
❑ B. False
Answer: A
115. The router Router D neighbor relationship is as follows Which of the following statement is correct? (Multiple Choice)
Answer: ACD
116. SRGB (segment routing global block). A local label set reserved for the global segment. In MPLS and IP,(6, SRGB is a collection of local labels reserved for global labels.
❑ A. True
❑ B. False (Right Answers )
Answer: B
117_ One of the reasons for the emergence of SR (Segment Routing) is that there are some factors that restrict the devebpment of traditional LOP. What are the correct descriptions about LOP of the following? (MullipP Choice)
❑ A. LOP calculation depends on ICP When IGP and LOP are not synchronized, it will cause black holes and affect the service (Right Answers)
❑ B LOP itself has 11 kinds of protocol packets, which greatly increases link bandwidth consumption and device CPU utilization. (Right Answers)
❑ C. LOP only supports IGP shortest path (minimum overhead) for path calculation, and does not support traffic engineering. (Right Answers)
▪ LOP cannot implement automatic label allocation
Answer: ABC
118_ The network administrator wants to be able to effectively use the IP address of the 192 168 176_0/25 network segment_ Now the company's marketing department has 20 mainframes, it is best to assign which of the following address
segment to the marketing depadment?
❑ A. 192_168_176_160/27
❑ B. 192.168.17696/27 (Right Answers)
❑ C. 192 168 176 0/25
❑ B. 192 168 176 4W29
Answer: B
119 When using gm ping command on the VRP platform, d you need to specify an IP address as the source address of the echo request message, which of the loemung parameters shouts be used/When using the sing command on Ihe VRP
platform, if you need lo specify an IP address as the source address of the echo request message, which of the following parameters should he used?
ID A. -s
❑ Ei -a (Right Answers)
❑ C4
❑ o_ -n
Answer. El
120. Which of the following types of addresses cannot be used as the IPv4 address of host?
❑ A. Class A address
❑ B. Class B address
❑ C. Class C address
❑ D. Class D address (Right Answers)
Answer: D
121. A company applies for a Class C IP address segment, but it is assigned to 6 subsidiaries. The largest subsidiary has 26 computers. Different subsidiaries must be in different network segments. So the network subnet mask of the largest
subsidiary should be, set to 0.
C A 255 255.255.224 (Right Answers)
17 B. 255.255.255.128
C C. 255.255.255.0
E 0. 255.255.255.192
Answer, A
122. Which of the following statement about the transport layer protocol is correct? (Multiple Choice)
❑ A. UDP uses the SYN and ACK flags to request to establish a connection and confirm the connection.
❑ B. Well-known port number range is 0-1023 (Right Answers )
❑ C. UDP is suitable for transmitting delay-sensitive traffic and can be reorganized according to the sequence number field in the message header.
❑ D. The establishment of a TCP connection is a three-way handshake process, and the termination of a TCP connection is subject to a four-way handshake. (Right Answers)
Answer: BD
123. Which of the following commands can modify the device name to huawei?
❑ A. rename huawei
❑ B. sysname huawei (Right Answers)
❑ C. do name huawei
❑ D. hostname huawei
Answer: B
124. The administrator wants to update the VRP of the AR2200 router. The correct method is (). (Multiple Choice)
❑ A. The administrator configures the AR2200 as a TFTP server to transmit VRP software through TFTP.
❑ B. The administrator configures the AR2200 as a TFTP client to transmit VRP software through TFTP. (Right Answers)
❑ C. The administrator configures the AR2200 as an FTP server to transfer VRP software through FTP. (Right Answers)
❑ D. The administrator configures the AR2200 as an FTP client to transfer VRP software through FTP. (Right Answers)
Answer: BCD
125. What are the command line views exsiting on the VRP operating platform?
❑ A. Interface view (Right Answers)
❑ B. User view (Right Answers)
❑ C. Protocol view (Right Answers)
❑ D. System view (Right Answers)
Answer: ABCD
126. Which bridge ID is not possible in the configuration BPDU sent by the switch?
❑ A. 4096 01-01-02-03-04-05 (Right Answers)
❑ B. 0 10-01-02-03-04-05
❑ C. 32768 06 01 02 03 04 05
❑ D. 0 00-01-02-03-04-05
Answer: A
Answer: A
128. The loop protection function provided by the RSTP protocol can take effect only on the specified port.
❑ A. True (Right Answers)
❑ B. False
Answer: A
129. In the RSTP protocol, the edge port loses the edge port attribute when it receives the configuration BPDU message.
❑ A. True (Right Answers)
❑ B. False
Answer: A
130. When STP is running on Huawei Sx7 series switches ; the priority of the switch is 0 by default.
❑ A. 8192
❑ B. 32768 (Right Answers)
❑ C. 16384
❑ D. 4096
Answer: B
131. Which of the following statement about the role of the STP protocol Forward Delay is correct?
❑ A. Reduce the time interval for BPDU transmission
❑ B. Delay in the transition of Blocking state and Disabled state
❑ C. Improve the convergence speed of STP
❑ D. Improve the BPDU lifetime and ensure that the configuration BPDU can be forwarded to more switches.
❑ E. Preventing temporary loops (Right Answers)
Answer: E
132. What is the correct statement about the static MAC address table?
❑ A. The user is manually configured and delivered to each interface board. The entries cannot be aged. (Right Answers)
❑ B. By viewing the static MAC address entry, you can determine whether there is data forwarding between the two connected devices.
❑ C. Static MAC address entries are lost after the system is reset, the interface board is hot swapped, or the interface board is reset.
❑ D. You can obtain the number of users communicating on the interface by viewing the number of static MAC address entries.
Answer: A
133. Which parameter is used in the spanning tree protocol to erect the root bridge?
❑ A. Port ID
❑ B. The system name of the switch
❑ C. Root path cost
❑ D. Bridge ID (Right Answers)
Answer: D
134 The administrator finds that the two routers stay in the TWO-WAY state when establishing an OSPF neighbor, the correct description of the following is ()
❑ A. The router is configured with the same zone ID
❑ B. These two routers are DR Other routers in the broadcast network. (Right Answers )
❑ C. The router is configured with the wrong router ID
❑ D The router is configured with the same process ID
Answer: B
135 An AR2200 router barns the route entries to the same network through OSPF and RIPv2 The cost of the route learned through OSPF is 4882 The number of hops learned through 51552 is 4 The routing table of the router will have ()
❑ A OSPF and RIPv2 routing
❑ 8 OSPF routing (Right Answers)
❑ C Both do not exist
❑ D RIPv2 routing
Answer: B
136. When the router forwards the datagram ; the data link layer needs to be re-encapsulated every time a data link layer passed.
❑ A. True (Right Answers)
❑ B. False
Answer: A
137. Which of the following network types does the OSPF protocol support? (Multiple Choice)
❑ A. Broadcast type (Right Answers)
❑ B. Point to point (Right Answers)
❑ C. Point-to-point type (Right Answers)
❑ D. NBMA (Right Answers)
Answer: ABCD
138. Which of the following are the stable states of OSPF neighbor relationships? (Multiple Choice)
❑ A. Down (Right Answers)
❑ B. Full (Right Answers)
❑ C. 2-way (Right Answers)
❑ D. Attempt
Answer: ABC
139. Which of the following routing protocols are dynamic routing protocols? (Multiple Choice)
❑ A. OSPF (Right Answers)
❑ B. BGP (Right Answers)
❑ C. Direct
❑ D. Static
Answer: AB
140 As shown in the figure, all routers run OSPF protocol, and the OSPF process number i5 1 and the area number is 0 Which of the following commands can implement this requirement on Router A? (Multiple Choice)
10.0.12.1/24 10.0.12.2/24
O GO/0/1 O
Router A Router B
❑ A # ospf 1 area 00 0 0 network 10 0.12.1 0 0 00 # (Right Answers)
❑ B # ospf 1 area 0000 network 100.1200003#
❑ C. # ospf 1 area 0 0 0 0 network 10 0 12 0 00 0 255 # (Right Answers)
❑ 0 # interface GmabitEthernet0/0/1 ip address 10 0 121 255 255 255 0 ospf enable 1 area 0 0 0 0 # (Right Answers)
Answer: AGO
141. In the OSPF protocol, which of the following description of the DR is correct? (Multiple Choice)
❑ A. The adjacency relationship must also be established between the DR and the BDR. (Right Answers)
❑ B. If the priority values of the two routers are equal. select the router with the large router ID as the DR (Right Answers)
❑ C if the priority values of the two routers are different, select the router with the smaller priority value as the DR_
❑ D By default, all routers in this broadcast network will participate in DR elections (Right Answers)
Answer: ABD
142 As shown in the figure, after the Um routers are configured with OSPF, the administrator configures the <mlenhinterfaces0f0/1> command on the RTA. The correct description is O (Multiple Choice)
RTA RTB
SO/0/1 60/0/1
❑ A The RTA wit continue to receive and analyze the OSPF packets sent by the RTB.
❑ B_ The neighbor relationship of the two routers will be down_ (Right Answers)
❑ C_ RTA wit not send OSPF packets anymore_ (Right Answers)
❑ 0_ The neighbor relationship of the two routers wit not be affected
Answer: BC
143. A DHCP OFFER packet can wry a DNS address, but can only carry one DNS address..
❑ A. True
❑ B. False (Right Answers)
Answer: B
144 As hown in the following figure, host A logs in to Router A through Telnet, and then obtains the configuration file of Router B through FM on the remote interface_ How many TCP connections exist on Router A?
HOST A
IP :192.168.1.2/2
GW:192.168.1.1
❑ A.1
❑ B2
❑ C 3 (Right Answers)
❑ 0.4
Answer: C
145 At present, the company has a network administrator. The AR2200 in the company network can be for remote management after directly enter the password through Telnet.
The company has two new network administrators, and wants to assign all administrators their respective usernames and passwords, as well as different permission levels. So what should doe (Multiple Choice)
❑ A When configuring each administrator's account, you need to configure different permission levels_ (Right Answers)
▪ R User authentication mode configured by Telnet must select AAA mode (Right Answers)
❑ C Configure three user names and their corresponding passwords in the AAA New. (Right Answers)
❑ CI Each administrator uses different public IP addresses of the device when running the Telnet command_
Answer: ABC
146. What is the role of the port trunk allow-pass vtan all command?
❑ A. The connected peer device can dynamically determine which VLAN IDs can pass.
❑ B. If the port default vian3 command is configured for the connected remote device, VLAN 3 between the two devices cannot communicate.
❑ C The peer port connected to the port must be configured with port trunk permit vlan all
❑ D. Allow all data frames of the VLAN to pass through the port. (Right Answers )
Answer: D
14T_ The Hybrid port can connect to both the user host and other switches_
I=1 A. True (Right Answers)
❑ B. False
Answer: A
148. The IP addresses of the VLANIF interfaces on the same switch cannot be the same.
❑ A. True (Right Answers )
❑ B. False
Answer: A
149. As shown in the following figure, the router uses the sub-interface as the gateway of the host. The P address of the gateway is 10 0.12 2 Which of the following commands can fu II this requirement? (Multiple Choice)
10.0.12.2/24
SWA
G 0/0/2 O
Access elan 20 Router A
ct
0
O
HOST A
11,1 10.0.12.1/24
MAC:MAC-A
❑ A interface GigabitEthemet0/0/43 10 dotlq termination yid 10 ip address 100_122 255255 255 0 arp broadcast enable #
❑ B. interface Gi gabitEthernot0/0/0 20 dotlq termination old 20 ip address 100_12 2 255255255 0 arp broadcast enable # (Right Answers )
❑ G. interface GigabitEthernet0/0/0.10 dotlq termination vid 20 ip address 10.0.12.2 255.255.255.0 arp broadcast enable # (Right Answers )
❑ a interface GigabitEthernet0/0/020 dotlq termination yid 10 ip address 10 0 12 2 255255 255 0 arp broadcast enable M
Answer: BC
150 The network administrator creates VLAN 10 on the Layer 3 switch and configures an IP address on the virtual interface of the VLAN_ When you use the command "<I>display ip interface brief</l,to check the status of the interface and
find that the VLANIF 10 interface is down, what operations should be taken to restore the VLANIF 10 interface?
❑ A Use the command "undo shutdown" on the VLANIF 10 interface.
❑ B. Incorporate a physical interface whose state must be Up into VLAN 10 (Right Answers)
❑ C Incorporate any physical interface into VLAN 10
❑ 0_ Incorporate an interface whose state must be Up and must be of the Trurk type into VLAN 10
Answer: B
151 As shown in the figure, the network administrator creates VLAN 2 on the SWA and SWB, and configures the ports connected to the host on the two switches as access ports and assigns them to VLAN 2 Configure GO/0/1 of the SA and
GO/0/2 of the SWB as trunk ports to allow all VLANs to pass. To achieve normal communication between the two hosts, he also needs 0
Hos, Host 13
VI Na VW
Answer:
152 As shown in the following figure, the switch configuration information is as follows_ According to the network and configuration, which of the following statements are correct,(Multiple Choice)
Router B
interface Senal1/0/0
link-protocol ppp
ip address 10 021 1 255.255 255 0
Router A
interface Senal1/0/0
link-protocol ppp
ip address 10 012.1 255 255 255 0
S 1/0/0 S 1/0/0
10.0.12.1/24 10.0.21.1/24
O
Router A Router B
❑ A_ Router A and Router B cannot team the MAC address of the other interface. (Right Answers)
❑ B_ Router A and Router B have ARP tables_
❑ C Two routers can establish OSPF adjacency (Right Answers)
❑ El There is no OR and BOR in the network (Right Answers)
Answer: AGO
153 The data link layer uses PPP encapsulation, and the iP addresses at both ends of the hnk may not he in the same network segment
❑ A True (Right Answers )
❑ B. False
Answer: A
154. The command to enable CHAP authentication in PPP is: ppp chap authentication.
❑ A. True
❑ False (Right Answers)
Answer: B
155. Apply the following ACL in SNMP: which of the following is wrong?
act number 2000
rule 5 permit source 192.168.1.2 0
rule 10 permit source 192.168 1_3 0
rule 15 permit source 192.168.1.4 0
❑ A. The device with IP address 192_168_1.5 can use SNMP service. (Right Answers)
❑ B. The device with IP address 192.168.1.3 can use SNMP service.
❑ C. The device with the [P address of 192.168.1.4 can use SUMP service.
❑ D. The device with IP address 192.168.1.2 can use SNMP service.
Answer: A
156. In the packet encapsulation format shown in the figure, which of the following fields will be encrypted by the ESP protocol of IPsec VPN?
Answer: D
157 As shown in the figure below, what is the scope of AH protocol authentication in IPsec transmission mode?
Answer: D
158. When the data encapsulation mode of I Psec is tunnel mode, the IP address of the intranet host is hidden, which can protect the security of the entire original data packet.
❑ A. True (Right Answers)
❑ B. False
Answer: A
159. Which of the following commands configures the authentication mode to be HWTACACS authentication?
❑ A. authorization-mode hwtacacs
❑ B. authentication-mode local
❑ C. authentication-mode none
❑ D. authentication-mode hwtacacs (Right Answers )
Answer: D
160. During the establishment of the adjacency relationship, what is the role of DD packets in OSPFv3?
❑ A. Used to send the required LSA to the peer router
❑ B. Discover and maintain neighbor relationships
❑ C. To describe its own LSDB (Right Answers)
❑ D. Request missing LSA
Answer: C
161. ff the MAC address of an interface is OEEO-FFFE-OFEC, what is its corresponding EU1-64 address?
❑ A. 02E0-FCFF-FEEF-OFEC (Right Answers)
❑ B. OOEO-FCEF-FFFE-OFEC
❑ C. OOEO-FCFF-FFFE-OFEC
❑ D. 00E0-FCFF-FEEF-OFEC
Answer: A
162. Which field of the IPv6 header can be used for Q0S?
❑ A. Next Header
❑ B. Payload Length
❑ C. Traffic Class (Right Answers)
❑ D. Version
Answer: C
Answer: B
164. The same interface of the router cannot be used as both a DHCPv6 server and a DHCPv6
❑ A. True (Right Answers)
❑ B. False
Answer: A
165. Which packet is sent by the DI ICPv6 client, requesting the DI ICPv6 server to assign an IPv6 address and network configuration parameters to it?
❑ A. Solicit (Right Answers)
❑ B. Advertise
❑ C. Discover
❑ D. Request
Answer: A
166. Segment routing (SR) is a protocol based on what idea to design for forwarding packets on the network?
❑ A. Routing strategy
❑ B. Destination routing
❑ C. Policy routing
❑ D. Source routing (Right Answers)
Answer: D
167. How many bytes are the packets using the MPLS label double-layer nesting technology more than the original IP packets?
❑ A. 4
❑ B. 8 (Right Answers)
❑ C. 16
❑ D. 32
Answer; B
168. Which of the following subnet routes can aggregate fron the route entry 10.0.0.24/29? (Multiple Choice)
❑ A. 10.0.0.24130 (Right Answers )
❑ B. 10.0.0.26130
❑ C. 10.0.0.28/30 (Right Answers)
❑ D. 10.0.0.23/30
Answer: AC
164. An IPv4 packet header length field is 20B. and the Iota[ length field is 1500B then what is the packet payload?
❑ A. 20B
❑ B_ 1520B
❑ C. 1480B (Right Answers )
❑ D. 95000
Answer: C
170. Which of the following is unlikely to be the 1l3v4 packet header length?
❑ A. 208
❑ 8. 64B (Right Answers)
❑ C. 608
❑ ❑. 328
Answer: B
171. The Ethernet optical interface can only work in the 0 mode.
❑ A. Full duplex (Right Answers)
❑ B. Half duplex
❑ C. Simplex
❑ D. Soft-negotiation
Answer: A
172 <Huawei>
Warning- Auto-Gonfig is working. Before configunng the device, stop Auto-Gonfigif you perform configurations when Auto-Gonfig is running, the DHCP routing, DNS, and VTY configurations will be lost.
Do you want to stop Auto-config, [YIN]:
The administrator found that the above message popped up on the demo_ The correct statement about this information is (),
❑ A. If you need to enable automatic configuration, the administrator needs to choose
❑ B. If you do not need to enable automatic configuration, the administrator needs to select N
❑ G When the device is first started, the auto configuration function is enabled (Right Answers)
❑ D When the device is first started, the auto configuration function is disabled.
Answer: C
173. Which of the following commands can be used to query the configuration information of the OSPF protocol? (Mutliple Choice)
❑ A. dis ip routing-table
❑ B. display current-configuration (Right Answers)
❑ C. display ospf peer
❑ D. In OSPF protocol view display this (Right Answers)
Answer: BD
174. The output information of a certain device is as follows. Which of the following statement is correct? (Multiple Choice)
Answer: ABD
175 What is the correct statement about the black hole MAC address table? (Multiple Choice)
❑ A The saved entries are not lost after the system is reset, the interface board is hot swapped, or the interface board is reset (Right Answers)
❑ B. It is manually configured and delivered to each interface board. The entries cannot be aged (Right Answers)
❑ C. After the blackhole MAC address is configured, the packet which source MAC address or the destination MAC address is the MAC address will be discarded. (Right Answers)
❑ 0 You can filler out illegal users by configuring blackhole MAC address entries. (Right Answers)
Answer: ABC0
176. Which is the correct statement about the static MAC address table? (Multiple Choice)
❑ A After the interface is stabcaily bound to the MAC address, the other interface receives the packet whose source MAC address is the MAG address will be discarded. (Right Answers)
DB_ By viewing the static MAC address entry, you can determine whether there is data forwarding between the two connected devices.
❑ C. A static MAC address entry can be bound to only one outbound interface_ (Right Answers)
❑ B. The saved entries are not lost after the system is reset, the interface board is hot swapped, or the interface board is reset. (Right Answers)
Answer: AC0
177. In the RSTP protocol, when the root port fails, 0 will he quickly converted to the new root port and immediately enter the forwarding state.
❑ A. Backup port
❑ B. Edge port
❑ C. Forwarding port
❑ D. Alternate port (Right Answers)
Answer: D
1 78. Both the Alternate port and the Backup port in RSTP cannot forward user traffic in RSTP, but can receive, process, and send BPDUs.
❑ A True (Right Answers)
❑ B. False
Answer: A
179. Al[ switches in the following figure have STP protocol enabled, if the path cost of all ports is 200_
What is the path cost value included in the configuration BPDU received by the GO/0/4 port of SWD?
SWA SWB
32768 00-01 02 03 04 AA 32768 00-01-02-03-04-13E1
SWD
32168 00-01-02.03-04-CC 32768 00-01 -02-03-04- DI)
D A. 0
❑ B. 200 (Right Answers )
❑ G. 400
❑ D. €00
Answer: B
180 As shown in the figure, at four switches run SIP, and various parameters use default values. When a port on the root switch sends a lam and fails to send configuration BPOUs through the port, how bng before the bbcked port in the
network enters the forwarding state,
floor
hC
❑ A About 30 seconds
❑ B About 50 seconds (Right Answers)
❑ G About 15 seconds
❑ 0. About 3 seconds
Answer: B
1 81. By default, it takes at least 30 seconds for the port status in SW to be changed from ❑isabled to forwarding.
❑ A. True (Right Answers)
❑ B. False
Answer: A
182. There are multiple NextHops in the routing table that reach the same destination network. These routes are called?
❑ A. Equivalent routing (Right Answers)
❑ B. ❑efault route
❑ C. Multipath routing
❑ ❑ - Suboptimal routing
Answer: A
183. Which of the following network types does the OSPF protocol need to elect DR and BDR? (Multiple Choice)
❑ A. Point-to-point type
❑ B. Broadcast type (Right Answers)
❑ C. NBMA (Right Answers)
❑ D. Point to point
Answer: BC
184. The Router ID of the OSPF process takes effect immediately after being modified.
❑ A. True
O B. False (Right Answers)
Answer: B
185. When configuring OSPF on a router, you must manually configure 0. (Multiple Choice)
❑ A. Enable OSPF process (Right Answers)
❑ B. Create an OSPF area (Right Answers)
❑ C. Configure the router ID
❑ D. Specify the network included in each zone (Right Answers)
Answer: ABD
186. The priority of the static routing protocol cannot be specified manually.
O A. True
❑ B. False (Right Answers)
Answer: B
Answer: C
188. The router in the backbone area has all the LSDBs in all its areas.
O A. True
❑ B. False (Right Answers)
Answer: B
189. Which of the following parameters does the OSPF protocol use for the master-slave relationship election?
O A. Process number of OSPF protocol
O B. Router ID (Right Answers)
O C. Sequence of startup protocols
❑ D. Interface IP address
Answer: B
190.According to the following DHCP flowchart, which statements are true? (Multiple Choice)
DHG. oistaver
Slept
MCP Offer
Strp2
CHCP Request
Srep3
DliCP ACK
sup&
Answer: BCD
191. The DHCP protocol interface address pool has a higher priority than the global address pool.
OA. TRUE (Right Answers)
OB. FALSE
Answer: T
192. As shown in the following figure, all links are Ethernet links, and all routers run OSPF. How many DR are elected in the entire network?
Router
0..
0 A. 1
O B. 2
O C. 3
O D. 4 (Right Answers)
Answer: D
193. How many member ports can be added to an Eth-Trunk interface on ARG3 series router and X7 series switch?
D A. 6
❑ B. 8 (Right Answers)
D C. 10
CI D. 12
Answer; B
194. A trunk port can send both tagged data frames and unlabeled data frames.
GA. TRUE (Right Answers)
Cl B. FALSE
Answer: T
195. As shown in the figure, if host A has host B ARP cache, host A can ping through host B.
Access vian Xo
SWA
G 0/0/2
Access vtan 20 SERVER B
tp 14;0 I/
ipodu 14.41A4
HOST A
IP 10.0.12.1.124
MAC:MAC
0 A. TRUE
OB. FALSE (Right Answers)
Answer: F
196. Which of the following statements about one-arm routing is correct? (Multiple choice)
0 A. One physical connection per VLAN
O B. On the switch, configure the port connected to the router as a trunk port and allow the frames of the relevant VLAN to pass. (Right Answers)
O C. Need to create a sub-interface on the router (Right Answers)
O D. Only one physical link is used between the switch and the router. (Right Answers)
Answer: BCD
197. Which of the following statements about link aggregation is correct? (Muitiple choice)
0 A. Eth-Truk interfaces cannot be nested (Right Answers )
O B. Ensure that the modes of link aggregation on the two devices are the same when the two devices are connected to each other_ (Right Answers)
O C. The GE interface and the FE interface cannot be added to the same Eth-Trunk interface. (Right Answers)
O D. GE electrical interfaces and GE optical interfaces cannot be added to the same Eth-Trunk interface. (Right Answers)
Answer; ABCD
198. NAPT uses the same public IP address but different port numbers to translate private IP addresses. Which statement regarding the port number is correct?
El A. It is necessary to configure port number mapping manually.
El B. It is only necessary to configure the port number range.
El C. It is not necessary to configure port numbers.
0 D. An access control list is needed to assign port numbers. (Right Answers)
Answer: D
199. Refer to the graphic.
RTA RTB
NDLC
Loopback 0 S1/0/1 S1/0/1
10.1.1.1132 I
10.1.1.2/24
On the interface serial 1/0/1 of RTA, the command "ip address unnumbered interface loopback 0" has been configured.
Which following statements are correct? (Multiple Choice)
O A. The IP address of RTA interface serial 1/0/1 is 10.1.1.1/24.
O B. The IP address of RTA interface serial 11011 is 10.1.1.1/32. (Right Answers )
Ei C. The route entry 10.1.1.0/24 exists in RTA's routing-table.
O D. The route entry 10.1.1.0/24 does not exist in RTA's routing-table. (Right Answers)
Answer; BD
200. The data link layer is encapsulated in PPP. The IP addresses at both ends of the link cannot be in the same network segment.
OA. TRUE (Right Answers)
O B. FALSE
Answer: T
201. Which of the following parameters are identified by the SA (Security Association)? (Multiple choice)
O A. Source IP address
O B. Security Parameter Index (SPI) (Right Answers)
O C. Destination IP address (Right Answers)
O D. Security Protocol (AH or ESP) (Right Answers)
Answer; BCD
202. As shown in the following figure, IPSec uses tunnel mode. What is the scope of ESP encryption?
0 A. 1 (Right Answers)
O B. 2
O C. 3
O D. 4
Answer, A
Answer: F
204. The following about IPv6 stateless address autoconfiguration and DHCPv6, which is correct? (Multiple choice)
O A. IPv6 stateless address autoconfiguration uses RA and RS messages (Right Answers)
El B. DHCPv6 is more manageable than stateless autoconfiguration (Right Answers)
O C. DHCPv6 can be divided into DHCPv6 stateful autoconfiguration and DHCPv6 stateless autoconfiguration. (Right Answers)
O D. IPv6 stateless address autoconfiguration and DHCPv6 can allocate related configuration information such as DNS address to the host.
Answer; ABC
205. Which of the following is the value of the IPv6 multicast address flag field indicates that the multicast address is a temporary multicast address?
O A. 0
0 B. 1 (Right Answers)
O C. 2
0 D. 3
Answer. B
206. Which of the following is the value of the IPv6 multicast address flag field indicates that the multicast address is permanent multicast address?
O A. 0 (Right Answers)
O B. 1
O C. 2
O D. 3
Answer. A
207. Based on tv1PLS labels, you can mark up to how many types of data streams with different service fevers?
❑ A. 2
❑ B. 4
El C. 8 (Right Answers)
El D. 16
Answer: C
208. Segment Routing encodes the segment sequence representing the forwarding path in the packet header_ As the packet is transmitted, the receiver parses the segment sequence after receiving the packet. If the top segment identifier of the
segment sequence is the local node, the identifier is displayed, and then the next step is processed. It it is not the local node, the packet is forwarded to the next node by using the ECMP (Equal Cost Muftiple Path) mode.
OA. TRUE (Right Answers )
OB. FALSE
Answer: T
209. The router interface output information is as follows ; which is correct? (Multiple choice)
Answer: ABCD
210. The output information of a router is as follows. What is the tunneling protocol used by this interface?
Answer: D
211. What of the following statements is correct regarding Access Control List types and ranges?
❑ A. A basic ACL value ranges from 1000-2999.
❑ B. An advanced ACL value range from 3000-4000.
❑ C. A layer 2 ACL value ranges from 4000-4999. (Right Answers)
❑ D. An interface ACL value ranges 1000-2000.
Answer: C
212. The configuration information of router DHCP address pool is as follows. Which is correct? (Multiple choice)
ip pool test
network 192. 168. 1. 0 mask 255. 255. 255. 0
excluded-ip-address 192.168.1.200 192.168.1.254
lease day 0 hour 12 minute 0
Answer: ABD
213. The output information of router routing table is as follows. Which is correct? (Muitip[e choice)
cle10.41mp1 1p rondo.
Route Flaws: I - rr1 Yr. 11 - download to fn.
-------- ---
Maui Inc 1...O.1 c
Dime ince Iceno In Paw. tvp = $ 0
ice. o- o.ors rn n I
: 1 /4 / I
,
10.6. 2_ /i2 51411.. In it r
Answer: BD
214 The following figure shows a routing table. When this router meows a packet with a destination IP address of 9.1.1.1, the router forwards the packet based on the route 9 1_0 0/16 because the matched bit number in this route is the
largest
<Fluawei>display ip routing-table
Route Flags: R - relay, 0 - downloadto fib
Answer: T
215. Router 1 routing table output information is as follows : which is correct? (Multiple choice)
❑ A. There are two dynamic routing protocols in the routing table. (Right Answers )
❑ B. The mask length of the IP address of the Ethernet0/0 interface on the router is 24 bits. (Right Answers)
❑ C. The IP address of the Etherneto/0/0 interface on the router is 10.0.12.1. (Right Answers)
El D. There is a dynamic routing protocol in the routing table.
Answer: ABC
216. Refer to the dispisy information.
CtLedwepchipley mac-address
Answer: C
217 The current switch MAC address table is as follows, which is correct?
.1,4411-1D
10C-Twarl
❑ A. When the switch is resteded, the MAC address learned on pod Eth0/0/2 does not need to be re-learned.
❑ B. When the switch is restaded, the MAC address learned on pod Eth0/0/3 needs to be re-learned
❑ C The data frame with the source MAC address of 5489-9811-0b49 and the destination MAC address of 5489-989d-1430 is received from the pod and forwarded from Eth0/0/2_
❑ 0_ The data frame with the source MAC address of 5489-98885-18a8 and the destination MAC address of 5489-989d-1d30 is received from the pod and forwarded from Eth0/0/1 (Right Answers)
Answer: 0
218. If the transport layer protocol is UDR the network layer Protocol field takes a value of 6_
OA. TRUE
OB. FALSE (Right Answers )
Answer: F
219. Which of the following statements about gratuitous ARP packets are true? (Multiple Choice)
❑ A. A system can determine whether conflicting EP addresses are used by sending a gratuitous ARP packet. (Right Answers)
❑ B. A gratuitous ARP packet uses the same format as an ARP request packet. (Right Answers)
❑ C. A gratuitous ARP packet can help to update an IP address
❑ D. A gratuitous ARP packet uses the same format as an ARP reply packet.
Answer: AB
220. Which of the following flow control methods can be used in the transport layer of the OSI reference model? (Muitiple choice)
❑ A Source suppression message (Right Answers)
❑ B. Window mechanism (Right Answers)
❑ C. Confirmation technology
❑ D Cache technology (Right Answers )
Answer: ABD
221. The application data must carry the MAC address after being processed by the data link layer.
OA TRUE (Right Answers )
OB. FALSE
Answer: T
222. A network engineer prompts the following message when entering the command line: Error: Unrecognized command found atw'position.
Which is correct about this prompt message?
D A. The input command is incomplete
D B. No keywords found (Right Answers)
D C. Input command is not clear
LI D. Parameter type error
Answer: B
223. By default, the root path cost of the root bridge in the STP protocol must be 0.
OA. TRUE (Right Answers)
0 B. FALSE
Answer: T
224. The output information of a switch is as follows. Which is correct?
-
0141Owei)display mac-address
MAC address table of slot 0:
O A. MAC 5489-9885-18a8 does not have corresponding port information, the switch appears BUG
0 B. All entries in the MAC address table are dynamically learned by the switch.
0 C. After the switch is restarted, MA C5489-9811-0b49 needs to be re-learned.
0 D. If the switch receives a data frame with a source MAC address or a destination MAC address of 5489-9885-18a8, the switch will discard the frame. (Right Answers)
Answer: D
SWA
Edge Port
C21!
14
' 4i>1
An administrator has configured the port interface G0/0/3 of Switch A as an edge port.
The user wishes to connect multiple devices to the network and connects his own managed switch to the network.
What effect will this have on the network?
111 A. Port interface GO/0/3 of switch A will shut down, as a BPDU has been received by the edge port.
❑ B. Port interface G0/0/3 of switch A will forward the data normally and drop the BPDU sent by the host to the switch.
CI C. Switch A will receive the BPDU and recaculate the port state of GO/0/3. (Right Answers)
0 D. Only Host A can send data out as before, the other devices linked cannot.
Answer: C
226. Which of the following protocols can be used to avoid loops in a redundant Layer 2 network?
El A. ARP
El B. STP (Right Answers)
CI C. UDP
CI D. VRRP
Answer: B
227 The static MAC address table is reset in the system, after the interface board is hot swapped or the interface board is reset, saved entries are not IosL
OA. TRUE (Right Answers)
O B.FALSE
Answer: T
228 As shown in the following figure, assuming that the MAC address table of the SWA is as follows, now Host A sends a data frame whose destination AC address is MAG-11 Which is correct,
MAC
MAC-B 0.0/0/2
S A
G 0/0/ G I /0/2 G 0/0/3
[ZE
HOST A HOST B HOST C
IP: 10.1.1.1/24 IP: 10.1.1.2/24
MAC:MAC A IP: 10.1.1.3/24
MAC:MAC-13 MAC:MAC-C
❑ A SWA discards data frames
❑ B Forward this data frame only from the GO/0/2 pod (Right Answers)
❑ G Forward this data frame only from the GO./0/3 pod
❑ a Generalize this data frame
Answer: B
229. As shown in the figure ; STP is disabled on both switches, and Host A sends an ARP Request. Which is correct? (Multiple choice)
SWA
Answer: BCD
230. What are the three ways for a router to establish a routing table? (Muitiple choice)
E A. Dynamic routing (Right Answers)
❑ B_ Static routing (Right Answers)
E C. Direct routing (Right Answers )
E D. Aggregate routing
Answer: ABC
231. The output information of a router is as follows. Which is wrong? (Muitiple choice)
Answer: ABD
Elm
HOST A HOST B
IP: 10.0.12.1/30 IP: 10.0.12.2/24
MAC: MAC-A MAC:MAC-B
❑ A. Host A and host B have different IP address masks, so host A and host B cannot communicate.
❑ B. Host A and host B have the same broadcast address
❑ C. Host A and Host B can communicate only if the masks of Host A and Host B are set to be consistent.
❑ D. Host A can ping host B (Right Answers)
Answer: D
233. In which state does OSPF determine the master-slave relationship of DD packets?
❑ A. 2-way
❑ B. Exchange
❑ C. ExStart (Right Answers)
❑ D. Full
Answer: C
234. Which of the following VRP commands can be used to enter area 0 view? (Multiple Choice)
❑ A. [Huawei]ospf area 0
▪ [Huawei-ospf-l]area 0 (Right Answers)
❑ C. [Huawei-ospf-t]area 0.0.0.0 (Right Answers )
❑ D. [Huawei-ospf-I]area 0 enable
Answer: BC
235. As shown in the figure below, which is correct?
HOST A HOST B
IP: 10.0.12.1/30 IP: 10.0.12.2/24
MAC: MAC-A MAC:MAC-B
❑ A. Host A and Host B cannot obtain the MAC address each other. (Right Answers)
❑ B. Host A ARP cache exists 10.0.12.5 MAC-B
❑ C. Host A can ping host B
❑ D. Host A and host B have the same broadcast address
Answer: A
236. All interfaces of the router running OSPF must belong to the same area.
OA. TRUE
B FALSE (Right Answers)
Answer: F
237. On Huawei devices, which of the following methods can be used in OSPF router ID selection? (Multiple Choice)
❑ A. If a loopback interface is configured, the largest IP address of the loopback interface is selected as the router ID. (Right Answers)
❑ B. If loopback interfaces are not configured, the largest IP address of an interface is selected as the router ID. (Right Answers)
❑ C. A Huawei switch may use the largest IP address of VLANIF interfaces as the router ID. (Right Answers)
❑ D. The default ID 127.0.0.1 is selected as the router ID.
❑ E. A valid router ID can be configured manually. (Right Answers)
Answer: ABCE
238. Which of the following are the basic elements of configuring a static route? (Multiple choice)
❑ A. Destination network segment (Right Answers)
❑ B. MAC address of the outgoing interface
❑ C. lP address of the next hop (Right Answers )
❑ D. Outlet (Right Answers )
Answer: ACD
239. VRP operating platform, which of the following command can view the routing table?
❑ A. display ip routing-table (Right Answers)
❑ B. display current-configuration
❑ C. display ip interface brief
❑ D. display ip forwarding-table
Answer: A
240. The following two configuration commands can implement the router RTA to the primary and backup backups of the same destination 10.1.1.0:
[PTA] ip route-static 10.1.1.0 24 12.1.1.1 permanent
[RTA] ip route-static 10.1.1.0 24 13.1.1.1
OA. TRUE
O B. FALSE (Right Answers)
Answer: F
241. What is the default server port number used by the Telnet protocol?
1:1 A. 21
❑ B. 24
❑ C. 22
❑ D. 23 (Right Answers)
Answer: D
242. The maximum number of UTY user interfaces determines how many users can log in to the device through Telnet or STelnet.
OA. TRUE (Right Answers)
0 B. FALSE
Answer: T
243. Which of the following network parameters can the Dynamic Host Configuration Protocol DHCP assign? (Muitiple choice)
O A. Operating system
O B. DNS address (Right Answers)
O C. IP address (Right Answers)
❑ D. Gateway address (Right Answers)
Answer: BCD
244. According to the topology and configuration shown in the figure, an Eth-Trunk link can be set up between the two switches on which LSW2 is the Actor.
LSW1 LSW2
GEO/0/2 GEO/0/2
31„te. -VA
Vev GEO/0/1 GEO/0/1
S
Answer: F
245 Referring to the configuration of the one-arm route in the following figure, it can be judged that even if the ARP proxy is not enabled on the sub-interface of RI, the administrative department and the finance department can exchange visits.
LSW
'
, ,
00 HautrIce ..eno/o/o.0a.no vod
ate0111G1,0,,000/0/0.1,1pacuiresa 192.168.100056 255051.255.0
,7
i
t =
05.41 51011100001
5 :
0
70'073
7 7:01::000 ration 00110
/0/0.411.1,05 192.160200.250 255.255.215.0
OA TRUE
GB FALSE (Right Answers)
Answer: F
246. In the MAC address table of SWA and SWO, Ore MAC address, VLAN and port correspondence correct,
own
G 010/3
H051 B
247. What is the value of the Flag field in the PPP frame format?
O A. OxFF
O B. Ox7E (Right Answers )
E C. OxEF
❑ 11. Ox8E
Answer: B
248. ICMP packets do not contain a port number . so NAPT cannot be used.
OA. TRUE
OB. FALSE (Right Answers )
Answer: F
249. If the network shown in the following figure requires the host A to access the Internet through Easy IP, which of the following ACL should be used on the G0/0/3 interface of Router A2
10.0.12.2/24
Router A
1
0.0.42/24 HOST R
19; 10.0.12 1/ 24
1=
.
j1
HOST A
0
IP; 1 .0.13.1/24
❑ A eel number 2000 rule 5 permit source 1111112_1 000
❑ B. acE number 2000 rule 5 pernit source 10.0.13.0 0.0 0.255# (Right Answers)
❑ G. act number 2000 rule 5 permit source 19 0_15_1 0 0_0_0
❑ fr act number 2000 rule 5 permit source 10 0 12 0 0 90 255#
Answer: B
250 As shown in the figure, the two private network hosts want to communicate with each other through the GRE tunnel. After the GRE tunnel is established, the network administrator needs to configure a static route on the RTA to import the
traffic from host A to host B The static routing channel can meet which of the following demand,
Answer: A
251 As shown in the figure below , which of the fol[owing locations should the AH header be inserted in the [Psec transport mode?
Answer: ❑
Answer: C
253. Which of the following default action business module ACL is permit?
❑ A. HTTP
❑ B. SNMP
❑ C. Telnet
❑ D. Flow strategy (Right Answers)
Answer: D
254. What is the Solicited-node multicast address corresponding to the IPv6 address 2019..8.AB?
El A. FF02::1:FF08:AB (Right Answers)
❑ B_ FF02::FF08:AB
E C. FF02 1 tE08.AB
❑ D_ FF 02:1:FF20: 19
Answer: A
255. What is the destination port number of the DHCPv6 request packet sent by the DHCPve chant?
D A. 546
E B. 548
E C. 547 (Right Answers)
D D 549
Answer: C
256. The OSPFv3 adjacency cannot be established. Which of the following reasons might be caused? (Multiple choice)
E A. Router-ID conflict (Right Answers)
E B. HELLO packet sending period is inconsistent (Right Answers)
E C. Inconsistent area numbers (Right Answers)
E D. Interface IPv6 address prefix is inconsistent
Answer: ABC
257_ Which field is added to the SNMP packet header than the IPv4 packet header?
El A. Version
El B. Flow Label (Right Answers)
El C Destination Address
LI D. Source Address
Answer: B
258 LOP penultimate hop pop-up mechanism (PHP), which allows the label to be ejected on the penultimate hop LS11 Thiscan
This reduce the packet processing complexity of which options,
0 A Last hop and penultimate hop device
0 B Penultimate hop device
0 C All MPLS network equipment
0 0 Last hop device (Right Answers)
Answer: 0
259. Which of the following MAC addresses cannot be used as the MAC address of the host NIG? (Multiple choice)
D A. 00-02-03-04-05-06
❑ E 02-03-04-05-06-07
D C. 01 02 03 04 05 06 (Right Answers)
D D. 03-04-05-06-07-08 (Right Answers )
Answer: CD
260_ Which of the following statements regarding the verification of IP connectmly are false? (Multiple Choice)
111 A The ping 12700_1 command can be used to check whether the network cable is correctly inserted into the host's Ethernet port (Right Anowers
0B ping command with the host IP address as the destination can be used to verify that the TCPAP protocol suite is functioning correctly_ (Right Answers)
0 C. The ping command can be used to verify connectivity between the host and the local gateway.
111 D The command "ipconfig /release" can be used to check connectivity problems between the host and the local gateway (Right Answers)
Answer: ABD
261. Now there are four network segments 10.24_0_0/24, 10.24.1_0/24, 10.24.2.0/24, 1024.3.0/24_ Which of the following network segments can be summarized? (Muitiple choice)
A. 10.24.0.0/23
B. 10.24.1.0/23
0 C. 10.24.0.0/22 (Right Answers)
0 D. 1 0.24,00/21 (Right Answers)
Answer: CD
262. The administrator wants to upgrade the configuration file for the AR2200 through the USB cable. Which is correct? (Multiple choice)
E A. The AR2200 does not support the use of USB to update configuration files.
E B. Connect the USB interface of the PC and AR2200 with mini USB cable.
El C. After connecting the cable; the administrator needs to install the driver for the mini USB. (Right Answers)
E D. Connect the mini USB cable of the PC and AR2200 with mini USB cable. (Right Answers)
Answer: CD
263. The switch receives a micas' data frame. If the destination MAC address of the data frame can be found in the MAC local table, the data frame must be forwarded from the MAC corresponding port.
GA TRUE
rJ B FALSE (Right Answers)
Answer, F
264. The output information of switch SW port is as follows: Which is wrong with the following statement?
Answer: B
265 The network shown in the figure below, all switches open STP. Disable the sending function of the BPDU on the G0/0/2 port of the SWA. The GO/0/1 of the SWC re-converges to become the root port. Which is correct? (Multiple choice)
SWA SWB
4096 00 01 02 03 04 AA 32768 00-01-02-03-04-813
HOST A
10: 10 11/24
MACNIAC, SWC H
32768 00 01 02 03 04 CC
Answer. ABCD
266. An existing switch directly connects to a designated port of peer device through a poet, but the port does not forward any message, but can receive the BPDU to monitor the network change. The role of the port should be?
CI A. Root port
O B. Designated port
0 C. Alternate port (Right Answers)
O D. Disable Pod
Answer. C
267. The switch MAC address table is as follows, which is correct?
Dittasteildis aac-address
MAC address table of slot 0:
Answer: B
268. The device running STP will discard when it receives the configuration BPDU of RSTP.
OA. TRUE (Right Answers)
OB. FALSE
Answer: T
269. STP When the designated port receives a configuration BPDU that is worse than itself, it immediately sends its own BPDU downstream.
OA. TRUE (Right Answers)
OB. FALSE
Answer: T
270. What message is sent when the SW downstream device notifies the upstream device of topology change?
O A. TCA message
O B. TC message
O C. Configure BPDUs
O D. TGN BPDU (Right Answers)
Answer: D
271. Which flag bits of the STP protocol are not used by the Flag field in the RSTP configuration BPDU? (Muitiple choice)
O A. Agreement (Right Answers)
❑ B. TCA
❑ C. TC
O D. Proposal (Right Answers)
Answer: AD
272. The backup port in RSTP can replace the failed root port.
OA. TRUE
OB. FALSE (Right Answers)
Answer: F
273. As shown in the following figure, the following configurations exist on the Router A. The following statements which are correct? (Muitiple choice)
ip route-static 10.0.2.2 255.255.255.255 10.0.12.2
ip route-static 10.0.2.2 255.255.255.25510.0.21.2 preference 40
GO/0/1
10.0.12.1/24 10.0.12.2/24 Loopback 0
10.0.2.2/32
O
10.0.21.1/24 10.0.21.2/24
Router A G0/0/2 Router B
0 A. If the G0/0/2 port is Down, the interface that reaches 10.0.2.2 in the routing table of Router A is changed to GO/0/1. (Right Answers)
D B. If the GO/0/1 port is Down, the interface that reaches 10.0.2.2 in the routing table of Router A is changed to G0/0/2.
0 C. the interface that reaches 10.0.2.2 in the routing table of Router A is GO/0/1.
0 D. the interface that reaches 10.0.2.2 in the routing table of Router A is GO/0/2. (Right Answers )
Answer: AD
274. VRP supports OSPF multi-process. If no process number is specified when OSPF is enabled, the default process number is?
El A. 0
El B. 10
El C. 1 (Right Answers )
P D. 100
Answer; C
275. The output information of a router is as follows. Which is correct? (Multiple choice)
Answer: BCD
216. ip route-static 10.0.12.0 255.255.255.0 192.168.1 1
Which statement is true regarding this command?
❑ A. The configuration represents a static route to the 192.168 1.1 network.
❑ B. The configuration represents a static route to the 10.0.12.0 network (Right Answers)
❑ C. The preference value of this configured route is 100.
❑ D. If the router has learned the same destination network via a dynamic routing protocol, the static route will always take precedence.
Answer: B
277. Which state does OSPF use to indicate that a neighbor relationship has been established?
❑ A. 2-way (Right Answers)
❑ B. Down
❑ C. Attempt
❑ D. Full
Answer: A
278. By default, the period far sending OSPF HELLO packets on the broadcast network is?
❑ A_ lOs (Right Answers)
❑ B. 40s
❑ C. 30s
❑ 13. 20s
Answer: A
279. Which of the following problems may emerge when a loop exists on a router? (Multiple Choice)
❑ A. tntinite packet forwarding.
❑ B. Increased CPU usage. (Right Answers)
❑ C. increased memory usage. (Right Answers)
❑ D. Continuous change of destination LP addresses of packets.
❑ E. Increased packet size.
Answer: BC
280. What are the roles of OSPF DR and BDR? (Muitipie choice)
❑ A. Reduce the number of exchanges of fink state information (Right Answers)
❑ B. Reduce the type of OSPF packets
❑ C. Reduce the time it takes far the adjacency to establish
❑ a Reduce the number of adjacencies (Right Answers)
Answer: AD
281 The Iwo routers are interconnected through the PPP lint The administrator configures OSPF on the Iwo routers and runs in the same area. If their router lOs are the same, which is correct?
❑ A. Two routers will establish a normal full neighbor relationship
❑ B. Two routers will not send helb information to each other
❑ C. Two routers will establish a normal full adjacency
▪ VRP will prompt the router ID conflicts of the Iwo routers. (Right Answers )
Answer: 0
282. Which of the following OSPF versions suit for IPv6?
❑ A. OSPFv1
❑ B. OSPFv3 (Right Answers )
❑ C. OSPFv4
❑ D. OSPFv2
Answer: B
283. The router R1 routing table output information is as follows, which is correct? (Muitiple choice)
<RI>display ip routing—table
Route Flags; R — seleY, D — download to fib
❑ A. The router forwards the packet with the destination network of 12.0.0.0/8. (Right Answers )
❑ B. The packet with the destination network of 12.0.0.0/8 will be forwarded from the Ethernet0/0/0 interface of the router.
0 C. The packet with the destination network of 11.0.0.0/8 will be forwarded from the GigabitEthernet0/0/0 interface of the router. (Right Answers)
❑ D. The router will drop the packet with the destination network of 11.0.0.0/8.
Answer: AC
284. The following election statement about DR and BDR, which is correct? (Muitiple choice)
❑ A. If an interface has a priority of 0, the interface will not participate in the election of DR or BDR. (Right Answers)
❑ B. DR must exist in the broadcast network (Right Answers)
❑ C. If the priorities are the same, the router ID is compared. The larger the value, the higher the priority is elected as the DR. (Right Answers )
❑ D. BDR must exist in the broadcast network
Answer: ABC
285. A Windows host is started for the first time. If the address cannot be obtained from the DHCP server, which of the following IP addresses may the host use?
❑ A. 127.0.0.1
0 B. 169.254.2.33 (Right Answers)
0 C. 255.255.255.255
❑ D. 0.0.0.0
Answer: B
Answer: A
287 As shown in the figure, the two hosts implement inter-machine communication through a single-route. When the available GO/0/1 2 sub-interface receives the data frame sent by Host B to Host A, which of the following operations does the
RTA perform?
RIA
vlasda via.°
Gateway: 10.0_1254 Gateway. 10.0.2.254
❑ A RTA will discard the data frame
❑ fr RTA forwards the data frame directly through the GO/0/1.1 subinterface.
❑ C. After the RTA deletes the VLAN tag 20, it is sent out by the GO/0/1.1 interface_
❑ a The RTA first deletes the VLAN tag 20, then adds the VLAN tag 10, and then sends it out through the GO/0/1.1 interface (Right Answers)
Answer: D
Answer: ACD
289. Which of the following is correct about link aggregation for LACP mode?
❑ A. The number of active ports cannot be set in LAGP mode.
❑ B. All active interfaces in LACP mode participate in data forwarding and share load traffic.
❑ G. There are only up to 4 active ports in LACP mode.
❑ D. In LACP mode, devices at both ends of the [ink send LACP packets to each other. (Right Answers )
Answer: D
290. The following statement about the Hybrid port, which is correct?
❑ A. Hybrid port does not require PVID
❑ B. Hybrid port only receives data frames with VLAN TAG
❑ C. Hybrid port must carry VLAN TAG when sending data frames.
❑ D. The Hybrid port can strip the TAG of certain VLAN frames in the outbound direction. (Right Answers)
Answer: D
291_ In the process of establishing PPP link, which phase can be directly converted into by the Dead phase?
❑ A. Authenticate
❑ B. Terminate
❑ C. Establish (Right Answers )
❑ D. Network
Answer: C
Which of the following values is used in the LengthlType field of the Ethernet data frame, indicating that the packet carrying the PPPoE session phase is carried?
292_
▪ 0x8863
❑ B Ox8864 (Right Answers )
❑ C. 0x0800
❑ D. Ox0806
Answer: B
293. On theVRP platform, which command can set the encapsulation type of the data link layer of the Serial interface to HDLC?
0 A. link-protocol hdlc (Right Answers)
O B. hdlc enable
O C. encapsulation hdlc
O D. link-protocol ppp
Answer: A
Answer: T
295. How many domains can be configured when configuring AM authentication on Huawei ARG3 series routers?
❑ A. 33
O B. 31
❑ C. 32
❑ D. 30 (Right Answers)
Answer: D
296. After the GRE keepalive function is enabled, the local end of the GRE tunnel periodically sends a keepalive packet to the peer every 10s.
OA. TRUE
OB. FALSE (Right Answers)
Answer: F
Answer: F
298. The router Radius information is configured as follows: Which is correct? (Multiple choice)
Answer: ACD
299. Which of the following SNMP protocols supports encryption?
❑ A. SNMPv2c
❑ fr SNMPv3 (Right Answers)
❑ G_ SNMPv2
❑ D_ SNMPv1
Answer: B
3011 Which packets are used by the DHC1W6 client and the DHCR6 server to determine whether the client uses DFICPv6 stolenl autoconfigurabon or DHCRe stateless autoconfiguration7 (Multiple choice)
❑ A. DA (Right Answers )
❑ 13 NA
❑ C. NS
❑ D. RS (Right Answers )
Answer: AD
301. What is the destination port number of the DHCPv6 ADVERTISE packet sent by the DHGR/6 server?
❑ A. 548
❑ B. 547
❑ C. 549
❑ D. 546 (Right Answers)
Answer: D
302. When the DHCPv6 client receives the value of the 0 flag and the 0 flag in the RA message sent by the DHCP,e6 server, the DHCPN6 client uses the DHCP),6 stateful auto configuration to obtain the IPM address and other configuration
information
10
O B 11 (Right Answers)
El C. 1
O B.0
Answer: B
Answer: T
304. On the network shown in the following figure, if the static route is configured on the RouterB, the NextHop corresponding to 2001::1/128 is in the routing table of RouterB.
ipv6 route•-static 2001::1 128 3001:12:1
❑ A. 3001::12:2
❑ B, Te80:1903:c3fb
❑ C. 3002::12:1
❑ D. 30011:12:1 (Right Answers)
Answer: D
305. SR (Segment Routing) is attracting more and more attention as a new anemative MPLS tunneling technology_ Many users hope to introduce SR technology to simplify network deployment and management and reduce CAPEX (Capital
Expenditure). As the current mainstream tunneling technology, SR is widely used in bearer networks.
OA. TRUE
OB. FALSE (Right Answers)
Answer. F
306. The broadcast address is a special address in the network address where the host bits are all set to 1. It can also be used as a host address.
OA. TRUE
OB. FALSE (Right Answers )
Answer: F
307. As shown in the figure, if the administrator wants to improve the performance of this network, which of the following is the most appropriate?
❑ A. Use a switch to connect each host and change the working mode of each host to full duplex. (Right Answers )
❑ B. Use the Hub to connect each host and change the working mode of each host to half duplex.
❑ C. Use the Hub to connect each host and change the working mode of each host to full duplex.
❑ D. Use a switch to connect each host and change the working mode of each host to half duplex.
Answer: A
308. If the command is executed on the router: user-interface maximum-vty 0, the following statement which is correct?
❑ A. Support up to 4 users to access through VTY at the same time
❑ B. Support up to 15 users to access through VTY at the same time
❑ C. No user can log in to the router through Telnet or SSH. (Right Answers)
❑ D. Support up to 5 users to access through VTY at the same time
Answer: C
309. On the VRP operating platform, what is the command to display the current interface configuration in the interface view?
❑ A. display users
❑ B. display this (Right Answers)
❑ C. display ip interface brief
❑ D. display version
Answer: B
310. Regarding the conflict domain and the broadcast domain, the description which is correct? (Multiple choice)
❑ A. The device connected to a HUB belongs to a broadcast domain. (Right Answers)
❑ B. The device connected to a switch belongs to a conflict domain.
❑ C. The device connected to a switch belongs to a broadcast domain. (Right Answers)
❑ D. The device connected to a router belongs to a broadcast domain.
❑ E. The device connected to a HUB belongs to a conflict domain. (Right Answers )
Answer: ACE
311. What is the priority of the bridge priority in the IEEE 802.1D standard?
❑ A. 8 (Right Answers)
❑ B. 4
O C. 16
❑ D. 2
Answer: A
312. In RSTP mode, interfaces in the Discarding state discard received data frames but maintain the MAC address table based on received data frames.
OA. TRUE
OB. FALSE (Right Answers)
Answer: F
313. As shown in the figure below, which port of the following switch will become the designated port?
❑ A. SWC G01012
❑ B. SWB GO/0/3
❑ C. SWC GO/0/1
❑ D. SVVA GO/013 (Right Answers)
Answer: D
314. The device port running STP is in the Forwarding state. Which is correct?
❑ A. The port only receives and processes BPDU and does not forward user traffic.
O B. The port forwards both user traffic and BPDU. (Right Answers)
❑ C. The port does not process BPDU and does not forward user traffic.
❑ D. The port will build a MAC address table based on the received user traffic but will not forward user traffic.
Answer: B
315 As shown in the network below, the host has an ARP cache which is correct? (Multiple choice)
❑ k The router needs to be configured with static routes, otherwise Host A and Host B cannot communicate in both directions.
❑ B. Host A has the following entries in the ARP cache. 1110.12.2 MAC-C (Right Answers)
❑ C Host A has the following entries in the ARP cache_ 11_0_12 1 MAC-8
❑ D. Host A and Host B can communicate in both directions (Right Answers)
Answer: BD
316 In the network shown in the following figure, all routers run the OSPF protocol, and the top of the link is the value of the Cost value_ What is the Cost value of the RA) routing table that reaches the network 100m 0/87
❑ A 70
❑ B 20
❑ C.60 (Right Answers)
❑ B. 100
Answer: C
317. As shown in the following figure, host A does not have a gateway configured. Host B has a gateway ARP cache. Which is correct? (Multiple choice)
❑ A. When the ARP proxy is enabled on G0/0/1 of the router, host A can communicate with host B.
❑ B. Host A and Host B cannot communicate in both directions (Right Answers)
❑ G Host B sends a packet with the destination IP address of 10 0 12 1 to he forwarded to host A (Right Answers)
❑ D Host A sends a packet with the destination IP address of 11_0 12 1 to be forwarded to host B
Answer: BC
318. In Huawei AR routers, by default, the value of the RIP priority is?
❑ A. 60
n B. 120
❑ C. 100 (Right Answers)
O D. 0
Answer: C
319. When OSPF establishes adjacency, which of the following must be consistent? (Multiple choice)
❑ A. Router Priority
❑ B. Router ID
❑ C. Router Dead Interval (Right Answers)
❑ D. Area ID (Right Answers)
Answer: CD
320. What are the advantages of the OSPF protocol? (Multiple choice)
❑ A. OSPF supports load balancing for equal-cost routes. (Right Answers)
❑ B. Supporting the division of regions (Right Answers)
❑ C. OSPF supports untyped inter-domain routing (CIDR) (Right Answers)
❑ D. OSPF supports packet authentication (Right Answers)
Answer; ABCD
Answer: D
322. If an Ethernet data frame has LengthiType=0x8100, then the payload of this data frame cannot be? (Multiple choice)
❑ A. ARP response packet
❑ B. OSPF packet
❑ C. RSTP data frame (Right Answers )
❑ D. STP data frame (Right Answers)
Answer: CD
323. The configuration information of an interface of a router is as follows. Which port can receive the data packets of this VLAN?
Answer: A
324. What should I do when the trunk port sends a data frame?
❑ A. When the VLAN ID is different from the PVID of the port, the data frame is discarded.
❑ B. When the VLAN ID is different from the PVID of the port, replace it with PVID forwarding.
❑ C. When the VLAN ID is different from the PVID of the port, strip the TAG forwarding
❑ D. When the VLAN ID is the same as the PVID of the port and the VLAN ID is allowed to pass through the port, the tag is removed and the packet is sent. (Right Answers)
Answer: D
325. Which of the following features does HDLC have? (Muitiple choice)
❑ A. HDLC protocol supports point-to-point links (Right Answers)
❑ B. HDLC protocol does not support FP address negotiation. (Right Answers)
❑ C. HDLC protocol supports point-to-multipoint links
❑ D. HDLC protocol does not support authentication (Right Answers )
Answer: ABD
326. The output information of a router is as follows. Which is correct? (Muitiple choice)
Answer: ABC
327. The Protocol field in the PPP frame format is 0xCO23, indicating that the protocol is?
❑ A. PAP (Right Answers)
O B. LCP
❑ C. CHAP
❑ D. NCP
Answer: A
328. What is the default ACL step size on the G3 series routers?
0 A. 15
❑ B_ 10 (Right Answers)
❑ G. 10
❑ D. 20
Answer: 8
Answer: C
Answer: BGD
331. About the matching mechanism of ACL, which is correct? (Multiple choice)
❑ A. If the ACL does not exist the result of returning the ACL is: no match (Right Answers)
❑ B. If the last rule is found and the packet still does not match, the ACL matching resuli is mismatch (Right Answers)
❑ C. Regardless of whether the result of the packet matching ACL is 'mismatch', "allow° or "roper, the packet is finally allowed to pass or refuse to pass, which is actually determined by each service module applying the ACL (Right
Answers)
❑ B. By default, the rule with the lowest number in the ACL stags searching. Once the rule is matched, the subsequent rule is stopped. (Right Answers)
Answer: ABCD
332. The network management workstation manages the network device through the SNMP protocol. When the managed device has an abnormality, what kind of SNMP packet will the network management workstation receive?
❑ A. get-response message
❑ B trap message (Right Answers )
❑ C. set-request message
❑ D. get-request message
Answer. B
333_ The router does not need to re-encapsulate the data link layer when forwarding [RE packets.
0A. TRUE
OB. FALSE (Right Answers)
Answer: F
334 There are 4 routers in a broadcast network, and all 4 routers run OSPFv3 protocol If all router DR priorities are not 0, how many adjacencies are there in the network?
❑ A. 6
❑ B.4
❑ C. 5 (Right Answers )
❑ D. 3
Answer: C
335. Which of the following statements about the Prefix Segment is wrong?
❑ A. Prefix Segment can be automatically assigned by IGP (Right Answers)
❑ B. Prefix Segment is spread to other network element through the IGP protocol. It is globally visible and globally valid.
❑ C. Prefix Segment requires manual configuration
❑ D. Prefix Segment is used to identify a destination address prefix in the network.
Answer: A
336. About the TTL field in the IPv4 header, which is correct?
❑ A. When a route has a loop, the TTL value can be used to prevent the packet from being forwarded indefinitely. (Right Answers )
❑ B. The TTL value is reduced by 1 for each Layer 3 device. (Right Answers )
❑ C. The TTL value is 8 bits long. (Right Answers)
❑ D. The range of TTL values is 0-255 (Right Answers )
Answer: ABCD
337. What is the value range of the DSCP field in the IPv4 header?
El A. 0-15
❑ B. 0-63 (Right Answers)
❑ C. 0-31
❑ D. 0-7
Answer: B
338. UDP is connectionless and must use which to provide the reliability of the transmission?
❑ A. Network layer protocol
❑ B. Application layer protocol (Right Answers)
❑ C. Transmission Control Protocol
❑ D. Internet Protocol
Answer: B
339. Because the TCP protocol uses three-way handshake mechanism when establishing and closing connections, TCP supports reliable transmission.
OA. TRUE
OB. FALSE (Right Answers)
Answer: F
340. Which method VRP does not support to configure the router?
❑ A. Configure the router through Telnet
❑ B. Configure the router through the mini USB port
❑ C. Configure the router through the console port.
❑ D. Configure the router through FTP (Right Answers)
Answer: D
341. In which view can the administrator modify the device name for the router?
❑ A. Protocol-view
❑ B. System-view (Right Answers)
❑ C. User-view
❑ D. Interface-view
Answer: B
342. Which of the following states does the STP protocol elect to perform port roles?
❑ A. Blocking
❑ B. Disabled
❑ C. Learning
❑ D. Listening (Right Answers)
Answer; D
343. What is the total length of the Rag field in the RSTP BPDU message?
❑ A. 6
❑ B. 4
❑ C. 8 (Right Answers)
❑ D. 2
Answer: C
344. Which of the following is not the reason that RSTP can improve the convergence speed?
❑ A. Introduction of edge ports
❑ B. Canceled Forward Delay (Right Answers)
❑ C. Fast switching of the root port
❑ D. PIA mechanism
Answer: B
345. Which of the following statements about the edge port in the RSTP protocol is correct?
❑ A. The edge port can be directly transferred from the Disable state to the Forwarding state. (Right Answers)
❑ B. The ports interconnected between the switches need to be set as edge ports.
❑ C. The edge pert discards the received configuration BPDU packet.
❑ D. Edge port participates in RSTP operation
Answer: A
346. A switch running STP can be converted to the Forwarding state after waiting for the forwarding delay in the Learning state.
OA. TRUE (Right Answers )
B FALSE
Answer: T
347. In Huawei AR routers, what is the priority of the static routing protocol by default?
❑ A. 60 (Right Answers)
❑ B. 100
❑ C. 120
❑ D0
Answer: A
348. As shown in the following figure, all routers run OSPF. Which device ABR?
❑ A. Router D
❑ 11 Router C
❑ C. Router A (Right Answers )
❑ D. Router B (Right Answers)
Answer: CD
349 As shown in the following figure, if the host has an ARP cache and host A sends a packet to host B, what is the destination MAC address and destination P address of the packet?
❑ A MAC-C 10 0 12 2
❑ B. MAC-A 11 0.12 1
❑ C MAC-C 11 0 12 1 (Right Answers)
❑ B. MAC-B 11 0.12.1
Answer: C
350. What types of networks are supported by the OSPF protocol? (Muitiple choice)
❑ A. Point-to-Multipoint (Right Answers)
0 B. Non-Broadcast Multi-Access (Right Answers)
❑ C. Point-to-Point (Right Answers)
❑ D. Broadcast (Right Answers)
Answer: ABM
Answer: C
352. When upgrading the router software using the FTP protocol, which transfer mode should be selected?
❑ A. Text mode
❑ B. Byte mode
❑ G. Streaming byte mode
❑ D. Binary mode (Right Answers)
Answer: D
353. Which message does the DHCP server use to confirm that the host can use the IP address?
❑ A. DHCP ACK (Right Answers)
❑ B. DHCP DISCOVER
❑ C. DHCP REQUEST
❑ D. DHCP OFFER
Answer: A
354. A Windows host is started for the first time. If the IP address is obtained by DHCP, what is the source IP address of the first packet sent by this host?
❑ A. 127.0.0.1
❑ B. 255.255.255.255
❑ C. 0.0.0.0 (Right Answers)
❑ D. 169.254.2.33
Answer: C
355. What is the range of VLAN [Ds that users can use?
❑ A. 0-4096
❑ B. 1-4096
❑ C. 1-4094 (Right Answers)
❑ D. 0-4095
Answer: C
356 if a port has the following configuration information, which port does the VLAN TAG carry when transmitting data frames of the VLAN7
❑ A. 1,2,3,100
❑ B. 2,3,4,6,100
❑ C 2,3,100 (Right Answers)
❑ D 1,2,3,4,6,100
Answer: C
357. The load balancing modes of the two ends of the Eth-Trunk can be inconsistent.
OA. TRUE (Right Answers)
OB. FALSE
Answer: T
358. For the network shown in the fotowing figure, the switch uses the sub-interface pair of the machine interface and the router. Which of the following configurations can fulfill this requirement?
❑ A. interface 10 ip address 10 0.12.1 255255255 0 # interface GigabitEthernet0/0/2 pod link-type hybrid pod hybrid untag Nan 10 #
❑ B. interface Mandl 0 ip address 10 0.12 1 255 255 255 0 # interface GigabitEthernet0/0/2 pod link-type trunk pod trunk allow-pass Nan 10 # (Right Answers )
❑ C. interface Menai() ip address 10 0 12 1 255 255 255 0 # interface GigabitEthernet0/0/2 pod link-type access port default Nan 10 #
❑ 0. interface Vlanif10 ip address 10 0 12 1 255 255 255 0 # interface GigabitEthemet0/0/2 pod link-type trunk pod trunk paid 10 pod trunk allow-pass Nan 10 #
Answer: B
359. In the following options, which is the necessary technology to enable a host with an IP address of 10 0 0 1 to access the Internet?
❑ A. Dynamic routing
❑ B. NAT (Right Answers)
❑ C. Route introduction
❑ D Static routing
Answer: B
360 As shown in the following figure, from the perspective of the security corner, Router A refuses to receive OSPF packets, GRE packets and IGMP packets received from GO/0/1 Which of the following commands can fulfill this requirement?
(Multiple choice)
❑ A act number 3000 rule 5 deny ere rule 10 deny ospf rule 15 deny icmp # interface GmabilEthemet0/0/1 traffic-filter inbound act 3000 # (Right Answers)
❑ B act number 3000 rule 5 deny gre rule 10 deny 89 rule 15 deny icmp # interface GmabilEthernelf1/0/1 traffic-filter inbound act 3000 # (Right Answers)
❑ a eel number 2000 rule 5 deny 47 rule 10 deny 89 rule 15 deny 1 # interface GmabilEthernet0/0/1 traffic-filter inbound eel 2000 #
❑ 13_ acl number 3000 rule 5 deny 47 rule 10 deny 89 rule 15 deny 1 # interface GmabrtEthernet0/0/1 traffic-filter inbound ad 3000 # (Right Answers)
Answer: ABO
361_ As shown Ingle following figure, which of the folbwing configurations can be used Io preyentfiles1 A from accessing Host B HTTP service. Host B can not access which service of Host A HP? (Multiple choice)
❑ A acl number 3000 ride 5 deny top source 100.0.12 CI 0 GO 255 s.rec-port act woe destination 1030_1311 0 0.0 255# acInonter 3001 rule 5 deny top source 100.01300/0255 source-parrot( fto dean.. 100 0 12 0 0.00.255#
aderface GgabilEthemetll0/1 traffic-51er outbound act 30004 interface GgabitEtherrieffir002 trafrinffitar outbound ark 31031 a
▪ 10 eat number 2000 rule S deny tap source 180.0.13.0 0 0 0.255 desk rmtmn 160 O.12 0 0 0.6.255 deslinatontporl. votwe a ad number 31101 rule 5 deny tcp source 1130.0 12 6 (1,0..0 255 clesfinalion 100.0.13 0 0 0.0.255 dEshrehon-port eq
Ira M traerface GigabilEtheineignOM traPfic-filler inbound 1113000# interface GigabilEtheme100.2 tarts-film inbound eel 3001 # (Right Answers)
❑ G_ act number 3000 rule 5 deny.? rescue 100 0.13 000.055 doshnohon 103.0120 0 00 255 destioabon-pad. www # acl number 3001 rule 5 deny lop source 100 0 )2,0 000.255 d.briatorr 100.0 13 00 0.255 255 d.bnalon-porl aq
ftp if interface GigularlEthame10/0,1 beffic-Stier oulbconcl 101 3000 0 inlerface GigubitElharne100/2 traffic-filler outbound acl 3001 to
❑ D. scl number 3000 rule 5 deny leo source 100.0.12.0 0.0.0.255 source-poll op wino destination 100.0.13.0 0.0.0.255# ecl number 3001 nile 5 deny Hp source 100.0.13.0 0.0.0.255 source-port ei ftp destination 100.0.12.0 0.0.0.2550
Interface OlgerbilEthernet0/0,1 traffic-filter intbound 5013000#Interface GfigabilEthemat0,02 traffic-filter inbound eel 30015 (Right Artawars)
Answer, HD
Answer: F
363. The multicast address FF02:.1 represents all nodes in the link-focal range.
OA TRUE (Right Answers)
OB. FALSE
Answer: T
365. In the estabFishment of adjacency relationship : what is the role of OD packets in OSPFv37
❑ A. Request missing LSA
❑ B. Used to send the required LSA to the peer router
❑a Discover and maintain neighbor relationships
❑ ❑. To describe your own LSDB (Right Answers)
Answer: D
366. The simplest form of IPv6 address 3001: ODB8: 0000: 0000: 0346: ABCD: 42BC: 8D58 is?
❑ A. 3001:0DB8::0000:0346:ABCD:42BC:8D58
❑ B. 3001: DB8::0346: ABCD: 42BC: 8058
❑ C_ 3001: D68::346: ABCD: 4260: 8058 (Right Answers)
❑ D. 3001:0DB8::0346:ABCD:42BC:8D58
Answer: C
367. When the host adopts DHCPv6 stateless autoconfiguration, which DHCPv6 message is sent by the host to request configuration information?
❑ A. Information-Request (Right Answers)
❑ B. CONFIRM
❑ C. SOLICIT
❑ D. REBIND
Answer: A
368. What is the length of the IPv6 multicast address flag field?
❑ A. 3
❑ B. 2
❑ C. 4 (Right Answers)
❑ D. 5
Answer: C
36g. Which of the following statements about the Node Segment is wrong?
❑ A. The Node SID cannot be the same as the node Prefix SID. (Right Answers )
❑ B. Node Segment is used to identify a specific node
❑ C. Configure the IP address as the prefix on the loopback interface of the node. The Prefix SID of this node is actually the Node SID.
❑ D. Node Segment is a special Prefix Segment
Answer: A
370. Which of the following are the actions of the MPLS (Multiple choice)
❑ A. pop (Right Answers)
❑ B. switch
❑ C. swap (Right Answers)
❑ D. puch (Right Answers)
Answer: ACD
371. If two Huawei S5710 switches are interconnected using a 10 Gigabit optical module, the working mode of the interconnect port defaults to full duplex.
OA. TRUE (Right Answers)
OB. FALSE
Answer: T
372. On the Huawei ARG3 router, the -i parameter of the Ping command in the VRP is used to set ?
❑ A. Interface for sending Echo Request packets (Right Answers )
❑ B. Source IP address for sending Echo Request packets
❑ C. Interface for receiving Echo Reply packets
❑ D. Destination IP address of receiving Echo Reply packets
Answer: A
373. The following statement about the TTL field in the IP packet header, which is correct?
❑ A. TTL defines the number of packets that the source host can send.
❑ B. Whenever a packet passes through a router, its TTL value is decremented by 1. (Right Answers )
❑ C. TTL defines the time interval at which the source host can send packets.
❑ D. Whenever a packet passes through a router ; its TTL value will be increased by 1.
Answer: B
374. Which of the following statements about ICMP messages is correct? (Multiple choice)
❑ A. The length of the Type field in the ICMP packet format is 8 bits. (Right Answers)
❑ B. The length of the Checksum field in the ICMP packet format is 8 bits.
❑ C. The value of the ICMP packet in the first protocol type field of IPv4 is 1. (Right Answers )
❑ D. The length of the Code field in the ICMP packet format is 8 bits. (Right Answers)
Answer: ACD
375. How does the VRP platform represent the third slot of the router, the sub-card No. 0 and the GE port No. 2.
❑ A. interface GigabitEthernet 3/2/0
❑ B. interface Ethernet 3/0/2
❑ C. interface XGigabitEthernet 3/0/2
❑ D. interface GigabitEthernet 3/012 (Right Answers)
Answer: D
376. Which of the following statements about the Spanning Tree Protocol Root Bridge election is correct?
❑ A. When the bridge priority is the same, the device with the large MAC address becomes the root bridge.
❑ B. When the bridge priority is the same, the device with a large number of ports becomes the root bridge.
❑ C. The device with a smaller bridge priority value becomes the root bridge. (Right Answers )
❑ D. The bridge with a higher priority value becomes the root bridge.
Answer: C
377. In standard STP mode, which of the following ports on non-root switches forward the BPDUs with TC bits set generated by the root switch?
❑ A. Root port.
❑ B. Backup port.
❑ C. Provisioning port
❑ D. Designated port (Right Answers)
Answer: D
378. The Message Age in the configuration BPDU sent by the root bridge in the STP protocol is 0.
❑ A. True (Right Answers)
❑ B. False
Answer: A
37g. Which of the following parameters should be considered when electing a root port in STP? (Multiple choice)
❑ A. Duplex mode of the port
❑ B. Port priority (Right Answers)
❑ C. the cost of the port reaches the root switch (Right Answers)
❑ D. MAC address of the port
❑ E. Port slot number, such as GO/0/1 (Right Answers)
Answer; BCE
380. As shown in the following figure, assume that all routers run OSPF at the same time. Which kind of router is BDR in this network?
Answer: A
381. The routing table shown below, which of the following statement is correct? (Multiple choice)
❑ A. The NextHop of the destination network 10.0.3.3/32 is not directly connected, so the router will not forward the packet with the destination IP address of 10.0.0.3.
❑ B. The router forwards the packet with the destination IP address 10.0.2.2 from Ethernet0/010. (Right Answers)
❑ C. The router forwards the packet with the destination IP address 10.0.12.1 from Ethernet0/0/0.
❑ D. The router forwards the packet with the destination IP address 10.0.0.3 from Ethernet0/0/0. (Right Answers)
Answer: BD
382.As shown in the figure below, which network device can Host A and Host B use to communicate?
Answer: A
383. The router output information is as follows, which of the following statement is wrong?
Answer: A
Answer: C
385. Which of the following statement about the OSPF backbone area is correct?
❑ A. Area 0 is the backbone area. (Right Answers)
O B. All areas can be backbone areas
❑ C. The backbone area must be deployed when the number of routers running OSPF exceeds two.
❑ D. All routers in the backbone area are ABR
Answer: A
386. What are the advantages of the OSPF protocol? (Multiple choice)
❑ A. OSPF supports load balancing for equal-cost routes. (Right Answers)
❑ B. OSPF supports Classless inter-domain routing (CIDR) (Right Answers)
❑ C. OSPF supports packet authentication (Right Answers)
❑ D. Supporting the division of areas (Right Answers)
Answer: ABCD
387 A DHCP server in the enterprise network is being used to allocated IP addresses to hosts. An administrator discovers however that some hosts are obtaining IP addresses outside of the scope of the DHCP servers address pool. What are
the possible reasons for this? (Multiple Choice)
❑ A Alf addresses from the DHCP pool have been assigned. (Right Answers)
0 B. The hosts were unable to discover a DHCP server and therefore generated their own address in the 169.254.0.0 address range. (Right Answers)
❑ C. Another DHCP server exists in the network and is aliocating IP addresses to hosts that happen to be within a closer proximity than the authorized DHCP server (Right Answers )
o D. The hosts were unable to discover a DHCP server and therefore generated their own address in the 127.254.0.0 address range.
Answer: ABC
388.[Huawei]user-interface vty 0 14
[Huawei-ui-vty0-14] acl 2000 inbound
[Huawei-ui-vty0-14] user privilege level 3
[Huawei-ui-vty0-14] authentication-mode password
Please configure the login password (maximum length 16): Huawei
The configuration of vty is as shown above, and the user privilege level is set to level 3.
❑ A. True (Right Answers)
❑ B. False
Answer: A
389. The aggregation port of the router can be configured with a routing subinterface.
❑ A. True (Right Answers)
❑ B. False
Answer: A
390. Which VLAN partitioning method is most appropriate when the host frequently moves the location?
❑ A. Based on IP subnetting
❑ B. Based on NIAC address division (Right Answers)
❑ C. Basic strategy division
❑ D. Port-based partitioning
Answer: B
391. On the VRP platform, the role of the command "interface vlan <vlan-id>" is 0.
❑ A. Create or enter the VLAN virtual interface view. (Right Answers)
❑ B. Create a VLAN
❑ C. No such command
❑ D. Configure a VLAN for a port
Answer: A
392_ NAPT distinguishes the [P addresses of different users by protocol numbers in TCP or UDP or IP packets.
❑ A. True
❑ B. False (Right Answers)
Answer: B
393. Which message need to send when needing to terminate a PPPoE session?
❑ A. PADR
❑ B. PADT (Right Answers )
❑ G. PADO
❑ D. PADI
Answer: B
394. Which of the following are the advantages of the PPP protocol? (Multiple choice)
❑ A. PPP protocol supports negotiation of link layer parameters (Right Answers)
❑ B. PPP protocol supports negotiation of network layer parameters (Right Answers)
❑ C. PPP protocol supports both synchronous transmission and asynchronous transmission. (Right Answers)
❑ D. PPP protocol supports authentication (Right Answers)
Answer: ABCD
395 The network shown below. Which of the following configurations enables all hosts to communicate with Host C, but Host A and Host B cannot communicate?
❑ A. act number 4000 rule 5 deny destination mac 5439-93ea-4010 source•-mac 5489-9843-104d # interface GigabitEthernet0/0/1 traffic-filter inbound acl 4000 #
❑ B. act number 4000 rule 5 deny destination-mac 5489-98e8-4c7c source-mac 5489-98d3-104d # interface GigabitEthernet0/0/1 traffic-filter outbound act 4000 #
❑ C. act number 4000 rule 5 deny destination-mac 5439-98ca-4c7c source-mac 5489-9300-550e # interface GigabitEtherne10/0/1 traffic-filter inbound act 4000 # (Right Answers)
❑ B. act number 4000 rule 5 deny destination-mac 5489-983a-400 source-mac 5489-98c0-550e # interface GigahltEthernet0/0/1 traffic-filter outbound acl 4000#
Answer: C
396. As hown in the figure: IPsec VPN is used to transfer data between two hosts. In order to hide the real IP address and ensure the security of data as high as possible, which mode and protocol of IPsec VPN is better, (Multiple choice)
❑ A. All
❑ B Tunnel mode (Right Answers)
❑ a Transmission mode
❑ B. ESP (Right Answers)
Answer: BD
397. Apply the following ACL in Telnet: which of the following statement is correct'?
acl number 2000
rule 5 deny source 172.16.105.30
rule 10 deny source 172.16.105.40
rule 15 deny source 172.16.105.50
rule 20 permit
❑ A. The device with IP address 172.16.105.6 can use the Telnet service. (Right Answers)
❑ B. The device with IP address 172.16.105.3 can use the Telnet service.
❑ C. The device with IP address 172.16.105.5 can use the Telnet service.
❑ D. The device with IP address 172.16.105.4 can use the Telnet service.
Answer: A
Answer: B
399. Which field in the Fv6 header acts like the TTL field in the IPv4 header?
❑ A. Version
❑ B. Traffic Class
❑ C. Hop Limit (Right Answers)
❑ D. Next Header
Answer: C
400. What are the three main roles in the DHCPv6 basic protocol architecture? (Multiple choice)
❑ A. DHCPv6 switch
❑ B. DHCPv6 relay (Right Answers)
❑ C. DHCPv6 client (Right Answers)
❑ D. DHCPv6 server (Right Answers)
Answer: BCD
401. The value of the MO flag in the RA message sent by the DHCPv6 service is 01. Which of the following methods does the host use to automatically configure the address?
❑ A. Value does not make any sense
❑ B. DHCPv6 stateless autoconfiguration (Right Answers)
❑ C. DHCPv6 stateful autoconfiguration
❑ D. Stateless autoconfiguration
Answer: B
402. Which of the following statements about the S field in the MPLS packet header is correct? (Multiple choice)
❑ A. Is there any other label after marking this label, 1 means yes, 0 means no
❑ B. The S bit exists in each MPLS packet header. (Right Answers)
❑ C. Is there any other label after marking this label, 0 means yes. 1 means no (Right Answers)
❑ D. S bit has only 1 bit in frame mode and 2 bits in cell mode.
Answer: BC
403.<Huawei>reset saved-configuration
Warning: The action will delete the saved configuration in the device.
The configuration, will be erased to reconfi gure. Continue? [YIN]:
The administrator configured the above on the AR2200, and which of the following description about the configuration information is correct?
❑ A. The saved configuration file will be replaced by the running configuration file.
❑ B. If the user wants to clear the saved configuration file, he should select "Y" (Right Answers)
❑ C. If the user wants to clear the saved configuration file, he should select "N"
❑ D. The configuration file will be retained when the device starts up.
Answer: B
404. On the VRP interface, use the command startup saved-configuration backup.ofg to configure the backup.cfg file for the next startup.
❑ A. True (Right Answers)
❑ B. False
Answer: A
405. Which of the following states is the STP port converted between exist Forward Delay? (Multiple choice)
❑ A. Forwarding-Disabled
❑ B. Blocking-Listening
❑ C. Disabled-Blocking
❑ D. Listening-Learning (Right Answers)
❑ E. Learning-Forwarding (Right Answers)
Answer: DE
406. Which of the following parameters should be considered when electing a root port in STP? (Multiple choice)
❑ A. Duplex mode of the port
❑ B. Port slot number, such as GO/0/1
❑ C. Port MAC address (Right Answers)
❑ D. Port priority (Right Answers)
❑ E. the cost of the port reaches the root switch (Right Answers)
Answer: CDE
407. Which of the following port states does not the RSTP protocol include?
❑ A. Blocking (Right Answers)
❑ B. Forwarding
❑ C. Discarding
❑ D. Learning
Answer: A
408. Which router is the BDR in this network, as shown in the figure below?
❑ A. Router B
❑ B. Router A
❑ C. no BDR (Right Answers)
❑ D. Router C
Answer: C
409. It is known that the routing table of a router has the following two entries:
If the router wants to forward a message with a destination address of 9.1.4.5, which of the following statement is correct?
❑ A. Select the second item as the best match because Ethernet is faster than Serialo
❑ B. Select the first item as the best match because the OSPF protocol has a higher priority value.
❑ G. Select the second item as the best match because the RIP protocol has a lower generation value.
❑ D. Select the second term as the best match because the route is a mare accurate match than the destination address of 9.1.4.5 (Right Answers)
Answer: D
410. The following is the routing table of router R1. If R1 sends a packet with the destination IP address of 10.0.2.2, which interface does it need to send from?
❑ A. Ethernet0/0/2
❑ B. Ethernet0/0/1 (Right Answers)
❑ C. Ethernet0/0/0
❑ D. GigabitEthernet0/0/0
Answer: B
411. When routers are running in the same OSPF area, which of the following description of their LSDB and routing table is correct? (Multiple choice)
❑ A. The link state database obtained by each router is different.
❑ B. The routing table cf each router is different. (Right Answers)
❑ C. The link state database obtained by all routers is the same (Right Answers)
❑ D. The routing tables obtained by all routers are the same.
Answer: BC
412. Which of the following elements are included in the routing table? (Multiple choice)
❑ A. Interface (Right Answers)
❑ B. Protocol (Right Answers)
❑ C. Destination/Mask (Right Answers)
❑ D. Cost (Right Answers)
❑ E. NextHop (Right Answers)
Answer: ABCDE
413. The output information of a router routing table is as follows. Which of the following statement is correct? (Multiple choice)
Answer; BC
414. By default, how long is the lease time of the lP address assigned by the DHCP server?
O A. 1 h
❑ B. 24h (Right Answers)
❑ C. 12h
O D. 18h
Answer: B
415. Which of the following applications is based on the TCP protocol? (Multiple choice)
❑ A. FTP (Right Answers)
❑ B. HTTP (Right Answers)
❑ C. Ping
❑ D. TFTP
Answer: AB
416 The DHCP server function is enabled on an interface of the router. Which of the following [P addresses may the DHCP client obtain?
interface GigabitEthernet0/0/1
ip address 11 0 1 1 255 255.255.0
dhcp select interface
dhcp server excluded-ip-address 11 0 1 2 11 0 1.127
❑ A 11 0 1 1
❑ B. 11.0.1.100
❑ C 11.0.1 254 (Right Answers )
❑ D. 11.0.1.255
Answer: C
417. ❑n the switch. which VLANs can be deleted by using the undo command? (MuttiNe choice)
❑ A. v[an 4094 (Right Answers)
❑ B. vian 1
❑ C. vlan 2 (Right Answers)
❑ D_ elan 1024 (Right Answers)
Answer: AGD
418 In the network shown in the following figure, the output information of switch A is as follows_ In the current MAC address table of itch A, which interlace dues the C address of host B correspond to'
❑ A GigabitEthernet0/0/2
❑ B. Eth-Trunk I (Right Answers)
❑ C GigabitEthemet0/0/1
❑ B. GigabitEthemet0/0/3
Answer: B
419. As shown in the following figure, the router configuration information is as follows. Which of the following statement is correct?
Router A interface GigabitEthernet0/0/0.100
dotlq termination vid 200
ip address 10.0.12.1 255.255.255.0
arp broadcast enable
Router B
interface GigabitEthernet0/0/0.200
dotlq termination vid 200
ip address 10.0.12.2 255.255.255.0
arp broadcast enable
Answer: A
420. Which of the following parameters does the LCP negotiation use to detect link loops and other anomalies?
❑ A. CHAP
❑ B. MRU
El C. PAP
❑ D. Magic word (Right Answers)
Answer; D
421. Static NAT can only implement one-to-one mapping between private addresses and public addresses.
❑ A. True (Right Answers )
❑ B. False
Answer: A
Answer: C
423. Which authorization modes does W support on Huawei ARG3 series routers? (Multiple choice)
❑ A. HWTACACS authorization (Right Answers )
❑ B. Nat authorized (Right Answers )
❑ C. Authorization after successful RADIUS authentication (Right Answers)
❑ D. Local authorization (Right Answers )
Answer: ABCD
424. Which of the following about the function of the AH protocol in IPsec VPN is wrong?
❑ A. Support data integrity check
❑ B. Support anti-message playback
❑ C. Support packet encryption (Right Answers)
❑ D. Support data source verification
Answer: C
425 As hown in the following figure, the router functions as the DHCPy6 relay agent and Router B functions as the DHCPy6 server. Which of the following parameters must be configured on Router B? (Multiple choice)
Answer: CD
426. How many times is the total length of an IPv6 address the length of an IPv4 address?
❑ A. 4 (Right Answers)
❑ B. 3
❑ C. 5
LI D. 2
Answer: A
427. Which of the following extended headers are supported by IPv6 packets? {Multiple choice)
❑ A. VLAN extension header
❑ B. hop-by-hop option extension header (Right Answers )
❑ C. Destination option extension header (Right Answers )
❑ D. Slice extension header (Right Answers)
Answer: BCD
428. Which packet does the DHCPv6 server use to reply to Solicit packets?
❑ A. Request
❑ B. Advertise (Right Answers)
❑ C. Offer
❑ D. Reply
Answer: B
429. The MPLS architecture consists of a Control Plane and a Forwarding Plane. The forwarding plane mainly performs label switching and packet forwarding.
❑ A. True (Right Answers)
❑ B. False
Answer: A
430. What is the length of the Ethernet_ll frame that contains the Ethernet header?
❑ A. 64-15188 (Right Answers)
❑ B. 60-1560B
❑ C. 64-1500B
❑ D. 46-1500B
Answer: A
431. The Tracert diagnostic tool in Huawei routers uses UDP to encapsulate trace data.
❑ A. True (Right Answers)
❑ B. False
Answer: A
Answer: B
433. Which memory saved configuration is used to select VRP version file when the device starts up?
❑ A. NVRAM (Right Answers)
❑ B. SD Card
❑ C. Flash
❑ D. USB
Answer: A
434. Which of the following parameter settings for terminal emulation are correct when configuring a router through the Console port?
❑ A.9600bps, 8 data bits, 1 stop bits, even parity check, and hardware flow control.
❑ B.19200bps, 8 data bits, 1 stop bits, no parity check, and no flow control.
❑ C.4800bps, 8 data bits, 1 stop bits, odd parity check, and no flow control.
❑ D.9600bps ; 8 data bits, 1 stop bits ; no parity check ; and no flow control. (Right Answers)
Answer: D
435. Which layer of the OSI reference model does the switch work on?
❑ A. Network layer
❑ B. Transport layer
❑ C. Data link layer (Right Answers)
❑ D. Physical layer
Answer: C
436. Which of the following statements about the Alternate port in the RSTP protocol is correct?
❑ A. The Alternate port serves as a backup for the specified port and provides another backup path from the root bridge to the corresponding network segment.
❑ B. Alternate port forwards user traffic and learns MAC address
❑ C. Alternate port does not forward user traffic but learns MAC address
❑ D. Alternate port provides another switchable path from the designated bridge to the root as the backup port of the root port (Right Answers )
Answer: D
437. Which of the following port states does the RSTP protocol not include?
❑ A. Discarding
❑ B. Blocking (Right Answers)
❑ C. Learning
❑ D. Forwarding
Answer: B
438. In the RSTP standard, in order to improve the convergence speed, the port directly connected to the terminal by the switch can be defined as 0.
❑ A. Fast port
O B. Root port
O C. Edge port (Right Answers )
O D. Backup port
Answer: C
439. VRP operating platform, which of the following commands can only view static routes?
❑ A. display ip routing-table verbose
❑ B. display ip routing-table statistics
❑ C. display ip routing-table protocol static (Right Answers)
❑ D. display ip routing-table
Answer: C
440. Which layer of the OSE reference model does the router work on?
❑ A. Data link layer
❑ B. Network layer (Right Answers)
❑ C. Application layer
❑ D. Transport layer
Answer: B
441. Which of the following description of static and dynamic routing is wrong?
❑ A. Dynamic routing protocols take up more system resources than static routes
❑ B. Static routing is simple to configure and easy to manage when applied in an enterprise.
❑ C. After a link fails, static routes can automatically complete network convergence. (Right Answers )
❑ D. After administrators deploy dynamic routing protocols in the enterprise network, post-maintenance and expansion can be more convenient.
Answer; C
442. Which of the following features does the OSPF protocol have?
❑ A. Easy to generate routing loops
❑ B. Calculate the shortest path in hops
❑ C_ Supporting the division of regions (Right Answers)
❑ D. Poor scalability
Answer: C
443. A router runs OSPF and does not specify a router ID. The P address of all interfaces is as follows. What is the router ID of the router OSPF protocol?
❑ A. 10.0.12.1
❑ B. 10.0.1.2 (Right Answers)
❑ C. 10.0.21.1
❑ D. 10.0.1.1
Answer: B
444. What port number is used by the FTP protocol to control plane?
❑ A. 22
❑ B. 21 (Right Answers)
❑ C. 24
❑ D. 23
Answer: B
445_ An administrator cannot log in to the AR22013 router through Te!net However, other administrators can log in normally_ Which of the following are possible causes') (Multiple choice)
❑ A. The admin user account has been deleted (Right Answers )
❑ B. The admin user account has been disabled (Right Answers)
❑ C The privilege level of the admin user account has been modified to 0
❑ 0 The Telnet service of the AR2200 router has been disabled.
Answer: AB
446 The Eth-Truk port in manual link aggregation mode, whose transmission rate is related to 0 (Multiple choice)
❑ A. Bandwidth of member ports (Right Answers )
❑ B. Is the member port on the public or private network?
❑ C. is the IP address configured on the member port?
▪ Number of member ports (Right Answers )
Answer: AD
447. As shown in the followteg tigers the ports connected to De host of Switch A and Switch B belong to 10 end VLAN IC respectively. late port Ape of the switch Is Trunk and the PV1D is to and OIL Which on ale tolowing statements are
-
00013C ,
(Mubpla cuotuei
❑ A Host A and host B boke lodifrononl VANS ate cannot ping each cater
❑ e Hoc A and Host B can pas (Right Answers)
❑ c Host AS ARP ragtag Gavot ha -forwarded to host B
D. The switch does nce carry as VLMI TAG when forwerding tea frames sent by the host Wight Answer.)
Answo BD
448 The authentication scheme, authorization scheme, accounting scheme, HWTACAGS, or RADIUS server template created on the AR router can take effect only after it is applied in the domain.
❑ A True (Right Answers)
❑ B. False
Answer: A
449. The router can assign a specified INC address to the host through a stateless address autoconfiguration scheme.
❑ A True
❑ B False (Right Answers)
Answer: B
Answer: C
451_ The OSPFv3 adjacency can be established only after the IP& address prefixes of the two ends are the same.
❑ A. True
❑ B. False (Right Answers)
Answer: B
452. Which of the following IPv6 addresses has a Solicited-node mutticast address of FF02::1 :FF12:12
❑ A. 2020::1200:1
❑ 2019::12:1 (Right Answers )
❑ 201g:112:1000
❑ a 2020:112ABI1
Answer: B
453. Which of the following statements about the Adjacency Segment is wrong?
❑ A. Adjacency Segment is used to identify a certain adjacency of a node in the network_
❑ B. Adjacency Segment is identified by Adjacency Segment ID (STD)
❑ G. Adjacency Sesnent spreads to other network elements through the IGP protocol, which is globally visible and valid locally.
❑ D. Adjacency Segment must be manually configured (Right Answers)
Answer: ❑
454. What levels are not included in the TCPIIPv4 model? (Multiple choice)
❑ A. Session layer (Right Answers )
❑ B. Presentation layer (Right Answers )
❑ C. Network layer
❑ D. Transport layer
❑ E. Application layer
Answer: AB
455. In the OSI reference model, which of the following has the ability to perform end-to-end error detection and flow control?
❑ A. Physical layer
❑ B. Data link layer
❑ G. Network layer
❑ ID_ Transport layer (Right Answers )
Answer: ❑
456 As shown in the figure, after the network administrator completes the Telnet configuration on the router, it is found that the host cannot establish a connection with the router through Telnet. Which of the following options can help solve this
problem? (Multiple choice)
Answer: BC
457. After receiving the BREW set by the TC, the switch running the RSTP protocol clears the MAC address learned by all ports.
❑ A. True
O B. False (Right Answers)
Answer: B
458. In the RSTP protocol, when the topology is stable, which port roles are in the Discarding state? (Multiple choice)
❑ A. Backup part (Right Answers)
❑ B. Designated part
❑ C. Alternate port (Right Answers)
❑ D. Root port
Answer: AC
459. Which of the following statement about STP messages is correct? (Multiple choice)
❑ A. During the initialization process ; each switch that enables STP protocol actively sends configuration BPDUs. (Right Answers)
❑ B. When the port is enabled with STP, the switch periodically sends TCN BPDUs from the specified port.
❑ C. The BPDU packet is encapsulated in an Ethernet data frame, and the destination MAC address is a multicast MAC address. (Right Answers)
❑ D. There are two types of packets in the STP protocol, configure BPDUs and TCN BPDUs. (Right Answers)
Answer: ACD
460. What is the value of the Type field in the RSTP configuration BPDUs?
❑ A. Ox01
❑ B. 0x03
❑ C. Ox00
❑ D. 0x02 (Right Answers)
Answer: D
461. Which of the following cases will the switch running RSTP generate a configuration BPDU with TO set?
❑ A. A non-edge port migrates to the Forwarding state (Right Answers)
❑ B. Backup port down
❑ C. Edge port migrates to Forwarding state
❑ D. Edge port migrates to Discarding state
Answer: A
462. Which of the following routing protocols can generate a default route? (Multiple choice)
❑ A. OSPFv3 (Right Answers)
❑ B. Direct
❑ C. OSPF (Right Answers)
❑ D. Static (Right Answers)
Answer: ACD
463. The router running OSPF first reaches the FULL state, and then performs LSDB synchronization.
❑ A. True
❑ B. False (Right Answers)
Answer: B
464. As the network shown in the following figure, all routers run OSPF. The top of the link is the value of the Cost. What is the path of the RA to the network 10.0.0.8/8?
0 A. 70
0 B. 100
0 C. 60 (Right Answers)
0 D. 20
Answer: C
465. Which packet does OSPF use to acknowledge received LSU packets?
❑ A. LSACK (Right Answers)
❑ B. LSA
El C. LSR
❑ D. LSU
Answer: A
466 if the Proto of a routing information in the routing table is OSPF, the priority of this route must be 10.
❑ A. True
❑ B. False (Right Answers)
Answer: B
467. On the serial interface ; you can configure a static route by specifying the next hop address or outbound interface.
❑ A. True (Right Answers)
❑ B. False
Answer: A
468 If the network shown in the folbwmg figure is used to make the 1opbacko communication between Router A and Router B through static routes, which of the folbwing command need to enter on Router A?
Answer: C
Answer: B
470. The output information of a switch is as follows. Which of the following statement is correct? (Multiple choice)
Answer: AB
471. A trunk part and a Hybrid port are handled in the same way when receiving data frames.
❑ A. True (Right Answers)
❑ B. False
Answer: A
472. Which of the following PPPoE messages are sent non-unicast?
❑ A. PADS
❑ B. PADI (Right Answers)
❑ C. PADO
❑ ❑. PADR
Answer: B
473. Which of the following fields does the HDLC frame consist of? (Multiple choice)
❑ A. Control field (C) (Right Answers)
❑ B. Frame Check Sequence Field (FCS) (Right Answers)
❑ C. Address field (A) (Right Answers)
❑ ❑ _ Flag field (F) (Right Answers)
Answer: ABCD
474_ The following figure shows the encapsulation formal of the data packet n IPsec VPN_ Which formal is the type of data packet used toencapsulate in IPsec V1417
Answer: A
475. Which of the following SNMP messages is sent to the NMS by the agent on the managed device?
❑ A. Gel-Next-Request
❑ B Get-Request
❑ C. Set-Request
❑ ❑. Response (Right Answers)
Answer: ❑
476 The AOL does not filter the traffic that the device itself generates to access other devices. Only the forwarded traffic is fiItered The forwarded traffic ncludes traffic that other devices access the device.
❑ A True (Right Answers)
❑ B False
Answer: A
Answer: A
478. Which of the following statement about ilpv6 address configuration is correct? (Multiple choice)
❑ A. IPv6 address supports multiple ways of automatic configuration (Right Answers)
❑ B. IPv6 supports DHCPv6 format for address configuration (Right Answers)
❑ C. IPv6 addresses can only be manually configured.
❑ D. IPv6 supports stateless autoconfiguration (Right Answers)
Answer: ABD
Answer: A
480. The Flow Label Field, Source Address Field, and Destination Address field in IPv6 together specify a forwarding path in the network for a particular data stream.
0 A. True (Right Answers)
D B. False
Answer: A
Answer: A
482. Which technology does the shared medium network use for data forwarding?
❑ A. CDMAtCD (Right Answers)
❑ B. CSMAIAC
❑ C. TDMA/CD
❑ D. CSMA1CD
Answer: A
Answer: C
484. How many ways does VRP support to configure router? (Multiple choice)
❑ A. Configure the router through Telnet (Right Answers)
❑ B. Configure the router through FTP
❑ C. Configure the router through the mini USB port (Right Answers)
❑ D. Configure the router through the console port. (Right Answers)
Answer: ACD
485.
The above is the display startup information of the AR2200 router. For this information, which of the following statements is wrong?
❑ A. The running configuration file is not saved
❑ B. The system file used for starting the device is ar22204200r003c0Ospc200.cc
❑ C. The system file of the next startup of the device can be modified by using the command "startup system software <atartup-software-name>".
❑ D. The system file cannot be modified when the device starts next time. (Right Answers)
Answer: D
486. In the VRP system, which of the following functions does the Ctrl +Z combination key have? (Multiple choice)
❑ A. Exit the console interface view.
❑ B. Return to the user view from the system view (Right Answers)
❑ C. Exit interface view
❑ D. Return to the user view from arty view (Right Answers)
❑ E. Exit the current view
Answer: BD
487. Which of the following description of the Forwarding state in the spanning tree protocol is wrong?
❑ A. port in Forwarding state can send BPDUs.
❑ B port in Forwarding state does not learn the source MAC address of the packet. (Right Answers)
❑ C. port in Forwarding state can forward data packets
❑ D. port in Forwarding state can receive BPDUs.
Answer: B
488. The bridge ID of the STP protocol in the switching network is as follows. Which of the following bridge ID owned by switch will become the root bridge?
❑ A. 32768 00-01-02-03-04-AA
❑ B. 32768 00-01-02-03-04-BB
❑ C. 32768 00-01-02-03-04-CC
❑ D. 4096 00-01-02-03-04-DD (Right Answers)
Answer: D
489. The RSTP protocol uses the PIA mechanism to speed up the speed at which the upstream port goes to the Forwarding state, but the loop is not available, what is the reason?
❑ A. Introduced edge ports
❑ B. Shortened the time of Forward Delay
❑ C. Ensure that loops do not occur by blocking its own non-root ports (Right Answers)
❑ D. Speed up the port role election
Answer: C
490. Which of the following statement about the dynamic MAC address table is correct? (Multiple choice)
❑ A. The interface learns by using the source MAC address in the packet. The entry can be aged. (Right Answers)
CI B. Dynamic entries are lost after system reset, hot swappable interface board, or interface board reset
❑ C. can obtain the number of users communicating on the interface by viewing the number of dynamic MAC address entries. (Right Answers)
O D. The saved entries are not lost after the system reset, hot swappable interface board, or interface board reset. (Right Answers)
Answer, ACD
Answer: C
492. The router needs to modify the destination IP address in the data packet when forwarding the data packet.
❑ A. True
El B. False (Right Answers)
Answer: B
493. route-static 10.0.2.2 255.255.255.255 10.0.12.2 preference 20, which of the following statement about this command is correct?
❑ A. The route must appear in the routing table.
❑ B. The destination network of the route is 10.0.12.2/32
❑ C. The priority of this route is 100.
❑ ID. The mask length of the route destination network is 32 bits. (Right Answers)
Answer:
494. Which of the following statement about the OSPF protocol DR is correct?
❑ A. DR must be the highest priority device in the network
❑ B. DR election is preemptive
❑ C. Router ID. The larger the value, the higher the priority is elected as DR.
❑ D. An interface priority is 0, and then the interface cannot be a DR (Right Answers )
Answer: D
495_ Which of the following statement about the priority of static routes in Huawei devices is incorrect?
❑ A. The default value of static route priority is 60.
❑ B. The priority value of the static route is 255, indicating that the route is unavailable.
❑ G. The static route priority value ranges from 0 to 255. (Right Answers)
❑ 0. The priority of static routes is divided into internal priority and external priority. Administrators can modify external priority
Answer: C
496_ The router starts the FTP service_ The username and password are both huawei, and the root directory of the FTP is set to flash,/dhcp/. Which of the following commands must be configured? (Multiple choice)
❑ A. local-user huawei password cipher huawei (Right Answers)
❑ B. lip sewer enable (Right Answers)
❑ G. local-user huawei service-type lip (Right Answers)
❑ B_ focal-user huawei flp-directory flash:/dhcp/ (Right Answers )
Answer: ABCD
497 The priority of the LAGP protocol is as shown in the figure. Switch A and Switch B adopt link aggregation in LAGP mode, and all interfaces loin the link aggregation group. The maximum number of active ports is set to 3. Which port of
switch A is not the active port?
❑ A. G0/0/2
❑ 11 GO/0/3 (Right Answers)
❑ a GO/0/0
❑ D. GO/0/1
Answer: B
498. If an Ethernet data frame has LengthiType=0x8100, which of the following statement is correct?
❑ A. This data frame must carry VLAN TAG (Right Answers)
❑ B. The TCP header must exist in the upper layer of this data frame.
❑ C. The UDP header must exist in the upper layer of this data frame.
❑ ❑. The IP header must exist in the upper layer of this data frame.
Answer: A
49.9. Which of the fat/owing description about the trunk port and the Access port is correct?
❑ A. The Trunk port can only send tagged frames.
❑ B. The Trunk port can only send untagged frames.
❑ C- The Access port can only send tagged frames.
❑ ❑ - The Access part can only send untagged frames. (Right Answers)
Answer: ❑
500 As shown In the following figure, Switch A and Router Aare connected through two Inks_ The two links ere in the manual ead balancing made The a/minimal-ion pert number is I, and the data is forwarded through the aggregation {ink which
needs to carry VLAN TAG 100, which configuration does Router A need to use? (Mottfpla choice)
100$
❑ A interlace Elh-Tuenskl port tune, pert trunk Wow-pass vlan interface GigabilEllownatCgatt athttrunk 1 g interlace Gigab0Elharnet0.0/2 athdrunk 1 a
❑ B. interlace Eth-Trunkl undo ponswitch # interface Elh-Trunki.100 dolgiemitnation red 100 to address 10.0.12.2255.255.255 0 arp broadcast enable -et (Right An...re 7
El C. inlerfeee Eds.Trunkl mode lamp-sleet port tinkeype trued( port think eked pass vtan 1004 tri.rface GtgabdEthanialtlf0f1 att,lrunk 1 u interface GgebilEthernetc/0,2 ath.lrunk I a
Et G. interface 0mabilEtheroato221 ant-trunk t 0 Interlace GigabrtElhernet0312 elh-trunk I tl (Right Answers)
Answer. BB
501_ Which of the following functions are supported by the LCP protocol in the PPP protocol? {Multiple choice)
❑ A. Negotiate the maximum receiving unit MRU (Right Answers )
❑ B. Negotiate the authentication protocol (Right Answers)
❑ C. Negotiate the network layer address
❑ D. Detect link loops (Right Answers)
Answer: ABD
502 A company has 50 private IP addresses. The administrator uses NAT technology to connect the company network to the public network_ However, the company has only one public network address_ Which of the following NAT conversion
methods meets the requirements,
❑ A easy-ip (Right Answers)
❑ NAPT
❑ G Dynamic conversion
❑ a Static conversion)
Answer: A
503 As shown in the figure, there is a Web server in the private network that needs to provide HTTP services to public network users. Therefore, the network administrator needs to configure NAT on the gateway muter RTA to implement the
requirements. Which of the following configuration can meet the requirements,
❑ A [RTA-Serm11/0/1Inat server protocol top gbbal 202 10.101 wnw inside 192.168.1.1 8080 (Right Answers)
❑ [RTA-Senal1/0/1]na1 server protocol tcp global 192.168.1.1 www inside 20210_101 8080
❑ G [RTA-Gmabitetherne10/0/1]nat server protocol top global 20210.101 WNW inside 192_168 1_1 8080
❑ El_ [RTA-Gmabitethernet0/0/1]nat server protocol top global 192168_11 anew inside 20210101 8080
Answer: A
504 When deploying an ACL on a Huawei device, which of the following description is correct? (Whale choice)
❑ k When AGLs define rules, they can only be advanced in the order of 10, 20, and 30
❑ B. The same ACL can be calked under mufti& interfaces (Right Answers)
❑ C. Can only be applied to the outbound direction when the ACL is called an the interface.
❑ D. AGLs cannot be used to filter OSPF traffic because OSPF traffic is not encapsulated using UDP protocol.
❑ E. The AGL can match the TGP/UDP port number of the packet, and can specify the range of the port number. (Right Answers)
Answer: BE
505. Which of the following message types does RADIUS use t❑ indicate authentication rejection?
❑ A. Access-Reject (Right Answers)
❑ B. Access-Request
❑ G. Access-Challenge
❑ D. Access-Accept
Answer: A
506. Which authentication modes does AAA support on Huawei AR G3 series routers? (Multiple choice)
❑ A. 802.1x
❑ B. None (Right Answers)
❑ C. HWTACACS (Right Answers )
❑ D. Local (Right Answers )
Answer: BCD
507 if the maximum number in Ihe ACL rule is 12, by default, when the user configures a new rule without specifying a number, what is the number assigned In the new rule by the system?
❑ A 14
❑ B. 16
❑ C. 15 (Right Answers)
❑ D. 13
Answer: C
508. If two IPsec VPN peers want to use both AH and ESP to ensure secure communication, how many SAs (Security Associations) do the two peers need to build?
❑ A. 1
❑ B. 2
0 C. 3
❑ D. 4 (Right Answers)
Answer: D
Answer: A
510. The DHCPv6 server includes the management address configuration flag (M) in the RA message. If the value is 1, which of the following statement is correct?
❑ A. Indicates that the client enables DHCPv6 stateful address configuration. (Right Answers )
❑ B. Indicates that the client needs to obtain other network configuration parameters through stateless DHCPv6.
❑ C. Indicates that the client enables IPv6 stateless address automatic allocation scheme
❑ D. Indicates that the client needs to cbtain other network configuration parameters through stateful DHCPv6.
Answer: A
511. In the OSI reference model, which of the following has the ability to perform end-to-end error detection and flow control?
❑ A. Transport layer (Right Answers)
❑ B. Network layer
❑ C. Data link layer
O D. Physical layer
Answer: A
512. After application data is processed through the data link layer, what does it call?
❑ A. Segment
❑ B. PDU
❑ C. Frame (Right Answers )
❑ D. Packet
Answer: C
513.<Huawei>system-view
[Huawei] user-interface console 0
[Huawei-ui-console0] history-command max-size 20
Regarding the above configuration, which of the following statement is correct?
O A. history-command max-size 20 is to adjust the size of the history command cache to 20 (Right Answers)
❑ B. The default size of the history command cache is 5
❑ C. The default size of the history command cache is 5 bytes.
❑ D. After the above configuration is completed, the history command cache can save 20 bytes of commands.
Answer: A
514. What is the destination MAC address of the BPDU in the STP protocol?
❑ A. 01-80-C2-04-05-06
❑ B. FF -FF
- - - FF
- - - -FF
- - -FF
- - - FF
❑ C. 00-80-C2-00-00-00
❑ D. 01 -80
- - -C2
- - - 00
- - - -00
- - 00 (Right Answers)
Answer: D
515. As shown in the figure, if the switch runs STP with default parameters, which of the following ports will be elected as the designated port?
El
Answer: A
516. The router has the longest matching principle when looking up the routing table. Which of the following parameter is the length?
❑ A. The size of the NextHoplP address
❑ B. Priority of the routing protocol
❑ C. Cost
❑ D. The length of the mask (Right Answers)
Answer: D
517. Which packet does OSPF use to describe its own LSDB?
❑ A. LSR
❑ B. HELLO
❑ C. DD (Right Answers)
❑ D. LSU
Answer: C
Answer: AD
519 As shown in the foleiving gap-AM. Nye switches are connected through four links COPPER refers mine efectneall interfacs, and FISH refers m the optical interlace. Which oil the foilanng Iva interfaces can implement link aggregation,
1
Lff A 0010 3 and FEC/I0I3
El 0 001013 and 00/13/2
❑ C 001012 end FE0/0/3
n 0. 0010:2 and 001011 (Right gnawers)
Answer. Li
520 if a rmsanys network administrator wants to divide users who frequently change office locations and °flan access different nahvorks from tie conch to be cotporata nalwisair to MANIC, which of the following methods should Ice used to
diridaVLAkts?
'LI A drvide MAN based on protocol
:11 d. dads ?DUI based on MAC address (Right Answers)
D C divide VLAN based on Port
71 0 diode WAN based an grlanals
Answer= ft
521. Which two stages can the PPPoE session establishment process be divided into? (Multiple choice)
O A. PPP connecting stage
❑ B. Discovery stage (Right Answers)
O C. PPPoE Session stage (Right Answers)
O D. DHCP stage
Answer: BC
Answer: C
523. Huawei ARG3 series routers enable all versions of SNMP (SNMPvl, SNMPv2c, and SNMPv3) by default.
O A. True (Right Answers)
El B. False
Answer: A
524. Which of the following encapsulation modes does lPsec VPN support? (Multiple choice)
O A. Tunnel mode (Right Answers)
O B. Exchange mode
O C. Transmission mode (Right Answers)
O D. Routing mode
Answer: AC
525 Two authentication domains "Area I" and "Area 2" are configured on a router Mel serves as the authentication server. FM:tit.er arrgentrealm wrIf the correct usemamelivatwer" and passauml "heir Wrieh authunlicalon Wraith wig the
0...signed to?
D A. Authentication domain 'Areal"
▪ 0 Aurvenhcalion domain 'Area?"
❑ C Authenticalsn domain 1default_admin domain"
❑ 0 Authentication Minim "defaull domain" (Right Answers)
Maw, 0
526. If the EUI-64 address 78BC-FEFF-FFFE-EFAB is calculated based on the MAC address, what should its corresponding MAC address be?
❑ A. 7ABC-FEFE-EFAB (Right Answers)
❑ B. 78BC-FFFE-EFAB
❑ C. 7ABC-FFFE-EFAB
❑ D. 78BC-FEFE-EFAB
Answer: A
527. The DHCPv6 client must obtain both IPv6 addresses and another configuration information from the DHCPv6 server.
❑ A. True
❑ B. False (Right Answers)
Answer: B
528. When the network device sends the IPv6 packet, the packet length is compared with the NTU value. If the value is greater than the MTU value, the packet is directly discarded.
❑ A. True
❑ B. False (Right Answers)
Answer: B
529. The output information of the router interface is as follows. Which mufticast address data can the interface receive? (Multiple choice)
Answer: ABCD
530. Which of the following statement about the IPv6 anycast address is correct? (Multiple choice)
❑ A. The packet whose destination address is anycast address will be sent to the network interface in the meaning of the route. (Right Answers)
❑ B. Implement load sharing of services (Right Answers)
❑ C. Provide redundancy for services (Right Answers)
❑ D. Anycast address and unicast address use the same address space (Right Answers)
Answer: ABCD
531. The MPLS label header is encapsulated between the data link layer header and the network layer header of the message.
❑ A. True (Right Answers )
❑ B. False
Answer: A
532. When using the Traced program to test the path through which the target node passes, the default TTL value for Traceroute is measured 0 times.
❑ A.3 (Right Answers)
❑ fr 8
❑ fr 6
❑ D.4
Answer: A
533. Which of the following description of the role of the free ARP message is wrong?
❑ A Used to advertise the active/standby switchover in the VRRP backup group.
❑ B Used to advertise a new current AC address_ The sender replaces the NIC and the AC address changes. In order to notify all hosts before the AP entry ages, the sender can send a free ARP_
❑ G Used to check duplicate IP addresses. Nommlly, no ARP response will be received. If received, it indicates that there is an address in the network that is duplicated with its own IP address.
❑ 0 Free ARP packets are used to keep active with the gateway device when the host is idle. (Right Answers )
Answer: 0
534. Which of the following statement about the ARP message is wrong?
❑ A. The ARP reply message is sent by the unicast party.
❑ B. Any network device needs to obtain the data link layer identifier by sending ARP packets. (Right Answers)
❑ C. ARP request message is sent by broadcast
❑ ID ARP packets cannot traverse the router and cannot be forwarded to other broadcast domains.
Answer: B
535. Using the command mkdir test in the VRP operating platform, the system will create a folder named test.
❑ A. True (Right Answers)
❑ B. False
Answer: A
536 When the switch receives a unicast data frame, it will look up the destination MAC address in the MAC table. Which of the following statement is wrong?
❑ A. If the MAC address is found, and the corresponding port of the MAC address in the MAC address table is not the one that enters the switch, the switch performs the forwarding operation
❑ B If the MAC address is found, and the corresponding port of the MAC address in the MAC address table is the port that the frame enters the switch, the switch performs the discard operation
❑ C. If the MAC address is not found, the switch performs the flooding operation_
❑ D. tf the MAC address is not found, the switch performs the discard operation. (Right Answers)
Answer: 0
537. The default route can be derived from (). (Multiple choice)
❑ A Manua[ configuration (Right Answers)
❑ B. Dynamic routing protccof generation (Right Answers)
❑ G. The router itself has
❑ a Link layer protocol generation
Answer: AB
538. Which of the following packets belong to the OSPF protocol? (Multiple choice)
❑ A. LSU (Right Answers)
❑ B. LSA
❑ C. LSR (Right Answers)
❑ D. HELLO (Right Answers)
Answer: ACD
539. On the broadcast network, both the DR and the BDR use the mutticast address 224.0.0.6 to receive the link status update packet.
0 A. True (Right Answers)
0 B. False
Answer: A
540. As shown in the following figure, all routers run OSPF. Which device is ABR? (Multiple choice)
Answer: AD
541. The output information of a switch is as follows. Which of the following interfaces can forward data frames with a VLAN ID of 40 and does not carry labels when forwarding?
❑ A. GEO/0/4
❑ B. GEO/0/2
❑ C. GEO/0/3
❑ D. GEO/0/5 (Right Answers)
Answer: D
542. As shown in the figure, which of the following configuration of the VLAN on the Huawei switch is correct? (Multiple choice)
❑ A. Clientl belongs to VLAN 10, and the command for dividing VLAN on the switch is correct. (Right Answers)
❑ B. Client2 belongs to VLAN 20, and the command for dividing VLAN based on MAC address on the switch is correct. (Right Answers)
❑ C. Client3 belongs to VLAN 30, and the command for dividing VLAN on the switch is correct.
❑ D. Client4 belongs to VLAN 40, and the command for dividing VLAN on the switch is correct.
❑ E. Client4 does not belong to VLAN 40, and the command for dividing VLAN on the switch is incorrect. (Right Answers)
Answer: ABE
543. In the link aggregation technology, which parameters can the Eth-Trunk use to implement load balancing? (Multiple choice)
❑ A. Same source IP address or destination IP address (Right Answers)
❑ B. Same source port number or destination port number
❑ C. Same source MAC address or destination MAC address (Right Answers )
❑ D. The same protocol type
Answer: AC
544. The Truk port can allow multiple VLANs to pass, including VLAN4096.
❑ A. True
❑ B. False (Right Answers)
Answer: B
545 As shown in the figure, the administrator wants all hosts to access the Tnternet from 8.00 to 17- 00 every day. In the interface configuration of GO/0/l, h h AGL rule should be bound to traffic-filter outbound?
❑ A time-range am9topm5 08 - 00 to 11:00 working-day # acl number 2003 rule 5 deny time-range am9topm5
❑ B time-range am91opm5 08:00 to 17:00 daily # acl number 2002 rule 5 permit time-range an-e1opm5 #
❑ C. lime-range amgtopm5 08_00 to 17:00 daily # acl number 2001 rule 5 deny time-range am9topm5 # (Right Answers )
❑ D. time-range am9topm5 08:00 to 17-00 off-day # acl number 2004 rule 5 permit time-range am91opm5
Answer: C
546. The router output information is as follows. What is the IPv6 address obtained by this interface?
❑ A. 3000::3000/64
❑ B. 3000::1/64
❑ C_ 3000::2/64 (Right Answers)
❑ D_ 2000::1/64
Answer: C
54T Which of the following features is no longer supported by ❑SPFv3 on an EPv6 network?
❑ A. Router-1D
❑ B. Multi-regional division
❑ C_ Authentication function (Right Answers )
❑ D_ Send protocol packets in mutticast mode
Answer: C
548. Which packet is sent by the DHCF've client in response to the Advertise packet sent by the DHCPv€ sewer?
❑ A. Offer
❑ B. Request (Right Answers)
❑ G. Reply
❑ D Advertise
Answer: B
549 The configuration information of a routers [MGM address pool is as folbws if the host adopts [MGM doleful autoconfiguration, which IPM addresses can the host obtain? (Multiple choice)
Answer: AC
550 Segment Routing (SR) is a protocol for extending the existing IGla protocol, based on the MPLS protocol, using source routing technology to forward data packets on the network_
❑ A_ True (Right Answers)
▪ False
Answer: A
551 if the routers Ethernet interface needs to forward a 1600B packet, which of the fallowing statement is correct? (Multiple choice)
❑ A The value of the Flags field of the first packet is 1 (Right Answers )
❑ B The first message contains the payload 14808 (Right Answers )
❑ G The slice offset field value of the second fragmented packet is 1480 (Right Answers)
❑ D. The value of the Flags field of the second packet is a
Answer: ABC
552. There is a TTL field in the header of the 1P packet. Which of the following statement about this field is correct?
❑ A. This field is used to indicate the priority of the packet.
❑ B. The length of this field is 7 digits.
❑ C. This field is used for packet anti-ring. (Right Answers)
❑ D. This field is used for packet fragmentation.
Answer: C
553. After the network administrator uses the TracedRoute function on the router device, what is the value of the Protocol field of the IPv4 header in the data packet sent by the router?
❑ A6
❑ B.1 (Right Answers)
❑ C.17
▪ 2
Answer:
554 As shown in the following figure, host C is ony required to communicate with one of host A or host B_ Then, which Gourmand can be configured to implement the requirement under the G0/013 port of SWB?
❑ A mtu 2000
❑ B port link-type trunk
❑ C speed 100
▪ mac-limit maximum 1 (Right Answers)
Answer: 0
555_ As shown in the following figure, the MAC address table of the SWA is as follows. The h can never learn the MAC address of the HOST A Which of the following reasons not possible,
Answer. B
556 The network administrator finds that a port on the switch has learned the MAC address, but cannot forward the data frame. Which of the following working states is the port in?
❑ A Disabled
❑ B Blocking
❑ C Listening
❑ D Learning (Right Answers)
Answer,
557_ As shown in the following figure, host A does not have a gateway configured_ Host B has a gateway ARP cache. In host A, the command ping 110 12_1 is used. Which of the following statement is correct?
❑ A The destination MAC address of the data frame sent by Host A is MAC-B.
❑ B The destination MAC address of the data frame sent by Host A is MAC-A.
0 C_ The destination IP address of the packet sent by host A is 11 0.12.1.
❑ 0_ No packets will be sent from host A (Right Answers)
Answer: 0
Answer: B
559. When configuring a static route on a broadcast interface, you must specify the next hop address.
❑ A. True (Right Answers)
❑ B. False
Answer: A
560. In the OSPF broadcast network, which routers do the DR other routers exchange link state information with? (Multiple choice)
❑ A. DR (Right Answers)
❑ B. BDR (Right Answers)
❑ C. All OSPF neighbors
❑ D. DR Other
Answer, AB
Answer: A
562. The configuration information of the GO/0/1 port of the switch is as follows. Which VLAN data frame does the switch forward not carry the VLAN TAG?
interface GigabitEthernet0/0/1
port link-type trunk
port trunk pvid vlan 10
port trunk allow-pass vlan 10 20 30 40
❑ A. 10 (Right Answers)
❑ B. 30
0 C. 40
❑ D. 20
Answer: A
563. Referring to the following topology and configuration. routers Ri and R2 are connected through a Serial low-speed cable, and the data link layer encapsulation uses PPP. When the Holdtimes of Ri and R2 are inconsistent, PPP negotiation
fails and communication cannot be performed.
C A True
C B False (Right Answers)
Answer: B
564. PPP is more secure and reliable than HDLC because PPP supports (). (Multiple choice)
❑ A. SSH B. PAP C. MD5 D. CHAP
Answer: BD
565. The configuration information of GO/0/1 interface of Router A is as follows. Which of the following statements are correct? (Multiple Choice)
acl number 3000
rule 5 deny 17
rule 10 deny 89
rule 15 deny 6
interface GigabitEthernet0/0/1
traffic-filter inbound acl 3000
Answer: BC
566. Layer 2 ACL can match source MAC, destination MAC, source IP ; and destination IP, etc. information.
❑ A. True
❑ B. False (Right Answers)
Answer: B
567. What is the value of the protocol type field in the FP packet, indicating that the protocol is GRE?
❑ A. 47 (Right Answers)
❑ B. 48
❑ C. 2
❑ D. 1
Answer: A
Answer: B
569. Which of the following parts does the global unicast address consist of? (Multiple Choice)
El A. Protocol ID
❑ B. Interface ID (Right Answers)
❑ C. Subnet ID (Right Answers)
❑ D. Global Routing Prefix (Right Answers)
Answer: BCD
570. The output information of Router C is as follows. How many global unicast address prefixes does Router C advertise?
❑ A. 1
❑ B. 2
❑ C. 3 (Right Answers)
❑ D. 4
Answer: C
571. What are the values of the currently used IPv6 multicast address flag field (Flag)? (Multiple Choice)
❑ A. 0 (Right Answers)
❑ B. 1 (Right Answers)
❑ C. 2
❑ D. 3
Answer: AB
572. Which of the following statements about the TTL field in the IP packet header is correct?
❑ A. Whenever a IP packet passes through a router, its TTL value is decremented by 1. (Right Answers)
❑ B. Whenever a IP packet passes through a router, its TTL value will be increased by 1.
❑ C. TTL defines the time interval at which the source host can send packets.
❑ D. TTL defines the number of packets that the source host can send.
Answer: A
573. Which of the following is not included in the VRP system login method?
❑ A. Telnet
❑ B. SSH
❑ C_ Netstream (Right Answers)
❑ D. Web
Answer: C
574. Which of the following information is used to prompt by the VRP operating platform for incomplete input commands?
❑ A. Error: Wrong parameter found at w position
❑ B. Error: Incomplete command found at wposition (Right Answers)
❑ G_ Error. Too many parameters found at w position
❑ D. Error Ambiguous command found at "'position
Answer: B
575. Which of the following descriptions about the specified port of the spanning tree is correct?
❑ A. The part en the root switch must not be the designated port.
❑ B. The designated port can forward configuration BPDUs to the network segment connected to it. (Right Answers)
❑ G. Each switch has only one designated purl
❑ D. Specify the porno forward configuration BPDUs from this switch to the root switch.
Answer: B
576 Which of the following statements about the handling of RSTP configuration BPDU are correct? (Multiple Choice)
❑ A After the topology is stable, the non-root bodge device sends configuration BPDUs at the interval specified by the Hello timer, regardless of whether the configuration BPDUs are received from the root bodge_ (Right Answers)
❑ B After the topology is stable, the non-root bridge demo sends the configuration BPDU after receiving the configuration BPDU sent by the upstream device.
❑ C The root port must wait for the BPDU Max Age timeout to re-top the topology calculation.
❑ 0 When a port receives a sub-optimal RST BPDU from the upstream designated bridge, the port immediately responds to its stored RST BPDU, (Right Answers )
Answer: AD
Answer: BD
578 Which of the following descriptions are incorrect about the OSPF Router ID? (Multiple Choice)
❑ A. The prerequisite for the normal operation of OSPF protocol is that the router has a router ID_
❑ B. The router ID must be the LP address of an interface of the router. (Right Answers)
❑ G. The router ID must be specified by manual configuration. (Right Answers)
❑ D. The router Ins must be the same in the same area. The router Ins in different areas can be different. (Right Answers )
Answer: BCD
579 When a router forwards a packet, if it does not match the corresponding detail route and there is no default route, the router will discard the packet directly.
❑ A. True (Right Answers)
❑ B. False
Answer: A
580 After the administrator successfully logs in to the router through Telnet, it is found that the IP address of the interface can not be configured on the muter. So what is the possible reason?
❑ A SNMP parameter configuration error
❑ B The Telnet terminal software used by the administrator prohibits the corresponding operation.
❑ C The Telnet user level is incorrectly configured (Right Answers)
❑ 0 The authentication mode of the Telnet user is incorrectly configured.
Answer: C
581 In the network shown in the following figure, the switch uses the VLANIF interface to connect to the sub-interface of the muter. Which of the following configurations can fulfill this requirement?
111
❑ A interface Mandl° ip address 100 12 1 255255 255 0 # interface GigabilEthernet0/0/2 pod link-type hybrid pod hybrid untag Nan 10 #
❑ B interface Vbnif10 ip address 100.121 255 255 255.0 # interface GigabitEtherneto/0/2 pod link-type access pod default Nan 10 #
❑ C interface Vlanifl D ip address 10 0 12 1 255 255.255.0 # interface GigabilEthernet0/0/2 pod link-type trunk pod trunk allow-pass Nan 10 # (Right Answers)
❑ 0 interface Vbnif10 ip address 10 a12:1 255 255 2550 # interface GigabilEthernet0/0/2 pod link-type trunk pod trunk pvid 10 pod trunk allow-pass Nan 10 #
Answer: C
582. If an Ethernet data frame Lengthrrype=0)(8100, which of the following ports might this data frame be sent from? (Multiple Choice)
❑ A. Switch Hybrid type port (Right Answers)
❑ B. Switch Access type port
❑ C. Serial interface of the router
❑ D. Switch Trunk type port (Right Answers)
Answer: AD
583 As shown in the figure, the two ports of switch GE0/0/1 and GEO/0/2 perform different Hybrid configurations. Which of the following statements are correct? (Multiple Choice)
❑ A. The data frame sent by the finance department carries the tag in the switch as VLAN20. (Right Answers)
❑ B. The administrative department and the finance department cannot visit each other because the VLANs belonging to the two depadments are different.
❑ C. If both ports GEO/0/1 and GEO/0/2 of the switch are modified to be trunk pods, the two departments can communicate normally.
❑ 0 The data frame sent by the administrative department carries the tag in the switch as VLAN20
❑ E The switch here can be a Layer 2 switch or a Layer 3 switch because communication does not need to go through a Layer 3 gateway (Right Answers)
Answer: AE
584 In the LPP negotiation phase of lhe PPP protocol, if the parameters sent by the other party are completely accepted, which of the following packet will be sent?
❑ Configure-Reject
❑ B. Configure-Ark (Right Answers )
❑ C. Configure-Request
❑ Configure-Nak
Answer: B
585 As shown in the following figure, which of the following configurations can be used to make Host A and Host B unable to communicate with each other? (Multiple Choice)
▪ acl number 2000 rule 5 deny source 100 0 12_0 0 0 0255 # interface GmabitEthernet0.10/3 traffic-filter inbound eel 2000 #
❑ B_ acl number 2000 rule 5 deny source 100.0.120 0.0 0255 # interface GigabitEthemet0/0/1 traffic-filter outbound net 2000 # (Right Answers )
❑ C_ acl number 2000 rule 5 deny source 100 0.12 0 0.0.0255 # interface GigabitEthernet0/0/1 traffic-filter inbound eel 2000 #
❑ fr act number 2000 rule 5 deny source 1000.120 0.0.0_255 # interface GigabitEthernet0/0/2 traffic-liter inbound eel 2000 # (Right Answers)
Answer: BB
586. The output information of Router C is as follows: what is the source IPv6 address of Router C sending OSPFv3 LSU packets?
111
❑ A. 2603:1/64
❑ B. FE80::2E0:FGFEFE48:4EC8 (Right Answers)
❑ C. 2005: 1/64
❑ 0. 2009-1/64
Answer: B
587. Which of the following message types is used for the RA message that is used for IPv6 stateless autoconfiguration?
❑ A. IGIv1Pv6
❑ El I Clv1Pv5 (Right Answers)
❑ C. UPv5
❑ D. TCPv6
Answer: B
588 The FEC (Forwarding Equivalence Class) is a set of data streams with certain commonalities; the FEC can be divided according to the add but cannot be divided according to the service type, CloS, etc.
❑ A True
❑ B. False (Right Answers)
Answer: B
589 Which statement is correct about the function of the network layer in the 081 reference model?
111 A. The closest layer to the user in the OSI reference model, providing network services for applications
❑ B Transmit bitstreams between devices, specifying levels, speed, and cable pins
O C. Provide connection-oriented or non-connection-oriented data transfer and error detection before retransmission
0 a Provide a logical address for the router to determine the path (Right Answers)
❑ E. Combine the bits into bytes, combine the bytes into frames, use the link layer address (the Ethernet uses the MAC address) to access the medium, and perform error detection.
Answer: D
590 UDP does not guarantee the reliability of data transmission_ It does not provide functions such as packet sorting and flow control. It is suitable for traffic with low transmission reliability requirements but high transmission speed and delay.
El A True (Right Answers)
❑ B False
Answer: A
591. If the application layer protocol is Millet ; what is the value of the Protocol field in the IPA header?
❑ A. 17
❑ B. 67
E C. 53
❑ D. 6 (Right Answers)
Answer: D
592. The MAC address table of the existing switch is as follows. The switch receives a data frame with a source MAC address of 5489-9811-0b49 and a destination MAC address of 5489-989d-I d30. Which of the following statements are
correct? (Multiple Choice)
111
0 A. If this data frame is received from Eth0/0/1, the switch will discard this data frame (Right Answers)
0 B If the data frame is received from Eth0/0/1, the switch forwards the data frame from the Eth0/0/3 port.
0 C If the data frame is meowed from Eth0/0/1, the switch floods the data frame.
❑ D If the data frame is received from the Eth0/0/3 pod, the switch forwards the data frame from the Eth0/01 port (Right Answers)
Answer: AD
593. SWA and SWB run the RSTP protocol. Which of the fo[lowing statements are correct? (Muth* Choice)
Answer: ABD
594. On the VRP platform, what is the order of the default protocol priorities of direct route, static route, RIP, and OSPF from high to low?
❑ A. Direct route, OSPF, static route, RIP (Right Answers)
❑ B. Direct route, OSPF, RIP, static route
❑ C. Direct route, RIP, static route, OSPF
❑ D. Direct route, static route, RIP, OSPF
Answer: A
595. As shown in the following figure, assume that all routers run OSPF at the same time. Which router is the DR in this network?
❑ A. Router A
❑ B. Router B (Right Answers )
❑ C. Router C
❑ D. Router ID
Answer: B
596. The OSPF router ID must be the same as the IP address of an interface on the router.
❑ A. True
❑ B. False (Right Answers)
Answer: B
597. What are the functions of OSPF hello packets? (Multiple Choice)
❑ A. Publish parameter information such as Router ED and Router Priority. (Right Answers)
❑ B. Synchronous router LSDB
❑ C. Neighbor discovery (Right Answers)
❑ D. Maintaining neighbor relationships (Right Answers)
Answer: ACD
598. By default, what is the OSPF protocol Deadtime on the broadcast network?
❑ A. 20s
❑ B. 40s (Right Answers)
❑ C. lOs
❑ D. 30s
Answer: B
599. When two OSPF routers form a TWO-WAY neighbor relationship, the LSDB has completed synchronization, but the SPF algorithm has not been run.
❑ A. True
❑ B. False (Right Answers)
Answer: B
600. Which of the following protocol does not belong to the File Transfer protocol?
❑ A. TFTP
❑ B. HTTP (Right Answers)
❑ C. FTP
❑ D. SFTP
Answer: B
Answer: D
602. The rule for creating a VLAN on a Huawei switch is that VLAN4095 cannot be created and VLAN 1 cannot be deleted.
❑ A. True (Right Answers)
❑ B. False
Answer: A
603. As shown in the following figure, the switch configuration information is as follows. Which of the following statements are correct? (Multiple Choice)
interface GigabitEthernet0/0/1
port hybrid pvid vlan 20
port hybrid untagged vlan 10 20
interface GigabitEtherneto/0/2
port hybrid pvid vlan 10
port hybrid untagged vlan 10 20
Answer: ABD
604. Which of the following protocol does the PPP protocol consist of? (Multiple Choice)
❑ A. Certification Agreement (Right Answers)
❑ B. NCP (Right Answers)
❑ C. LCP (Right Answers)
❑ D. PPPOE
Answer: ABC
605. Which of the following value is used in the Protocol field in the PPP frame to indicate that the core is an IP packet?
❑ A. 0x8821
❑ B. 0x0021 (Right Answers)
❑ C. Ox8021
❑ D. 0x8863
Answer: B
606 As shown in the following figure, ail the hosts can communicate with host C through which of the following configuration?
But host A and host B cannot communicate.
❑ A_ acl number 4000 rule 5 deny destination-mac 5489-98ea-4c7c source-mac 5489-98d3-104d # interface GigabitEthernet0/0/1 traffic-filter inbound eel 4000
❑ B. eel number 4000 rule 5 deny destination-mac 5489-93ea-4c7c source-mac 5489-98c0-550e # interface GigabitEthernet0/0/1 traffic-filler inbound eel 4000 4 (Right Answers)
❑ C act number 4000 rule 5 deny destination-mac 5489-98ea-4c7c source-mac 5489-98c0-550e # interface GigabitEthernet0/0/1 traffic-filter outbound eel 4000
❑ B. act number 4000 rule 5 deny destination-mac 5489-98ea-4c7c source-mac 5489-98d3-104d # interface GigabitEthernet0/0/1 traffic-filter outbound act 4000
Answer: B
607. As shown in the following figure, which of the following configurations can be used to make Host A and Host B unable to communicate with each other? (Multiple Choice)
❑ A_ act number 2000 rule 5 deny source 1000_12 0 00 0 255 # interface GigabitEthernet0/0/1 traffic-filter inbound ad 2000 It
❑ B lad number 2000 rub 5 deny source 100 0.12 0 00 0255 # interface GigabitEthernet0/0/3 traffic-filter inbound eel 2000 4
❑ C. act number 2000 rule 5 deny source 1000.12 0 0.0.0.255 # interface GigabitEthernet0/0/1 traffic -finer outbound eel 2000 4 (Right Answers)
❑ D. act number 2000 rule 5 deny source 100.0.12.0 0.0.0.255 # interface GigabitEthemet 0/0/2 traffic-filter inbound eel 2000 # (Right Answers)
Answer: CD
608. As shown in the following figure, the administrator wants that all the hosts cannot access the Web service (port number is 80) and other services are accessed normally, what AGL rule should be bound to traffic-filter outbound in the
interface configuration of GO/0/1,
El
❑ A. act number 3001 rule 5 deny udp destination-port eq www rule 10 porn,'
❑ B act number 3003 rule 5 permit ip rule 10 deny udp destination-port eq www #
❑ G act number 3000 rule 5 deny top clestmation-port eq www rule 10 permit ip # (Right Answers)
❑ act number 3002 rule 5 permit ip rule 10 deny tcp destination-port eq www #
Answer, C
609. What is the decimal value of the OSPFv3 packet in the Protocol field in the IPv6 packet header?
❑ A. 69
❑ B. 89 (Right Answers)
❑ G. 92
❑ D. 59
Answer: B
610. Which of the following ll3v6 address Solicited-node mudicast addresses are F02:1:FFAB:FECA? (Multiple Choice)
0 A. 2030::BBAB:FECA (Right Answers)
I=1 B. 2020::EEAB:FECA (Right Answers)
El C. 2020::FFAB:FECA (Right Answers)
❑ D. 2020::FFBA:FECA
Answer: ABC
611. Which of the following IPv6 addresses are link-wide multicast addresses? (Multiple Choice)
El A. FF02 . :2 (Right Answers)
CI B. FF02::1 (Right Answers)
El C. FF12::1 (Right Answers)
CI ID_ FF12::2 (Right Answers)
Answer: ABCD
612. What is the total length of the interface identifier of the link-local unicast address?
CI A. 48bit
I=1 B. 32bit
CI C. 64bit (Right Answers)
1:1 D. 96bit
Answer: C
613. The LER in the MPLS domain is called the Label Egress Router.
❑ A. True
❑ B. False (Right Answers)
Answer: B
614. If the value of the Type/Length field of an Ethernet data frame is 0x0800, the header length of the upper packet carried by the data frame ranges from 20 to 60B.
El A. True (Right Answers)
0 B. False
Answer: A
615. On the VRP platform, which of the following methods can you access the previous history command? (Multiple Choice)
O A. Left cursor
O B. Ctrl+U
El C. Ctrl+P (Right Answers)
El D. Upper cursor (Right Answers)
Answer: CD
616. What is the full name of VRP?
❑ A. Virtual Routing Platform
❑ B. Versatile Redundancy Platform
❑ C. Versatile Routing Protocol
❑ D. Versatile Routing Platform (Right Answers)
Answer: D
617 As shown. the figure, three Layer 2 switches ere interconnected wrgi one HUB, and the switch is enabled web SIP. For the budge ID setting of the switch SIP, refer to the following Figure_ Others ere default configurations. Which of the
foaming statement is wrong?
Answer, C
618 As shown in the following figure, all switches run the SIP protocol_ After the topology is stable, modify the sending period of the configuration BPDU on which of following switch can affect the sending period of the SWD configuration
BPDU?
❑ A SWD
❑ B_ SWG
❑ a SWB
❑ D SWA (Right Answers)
Answer:
619. As shown in the network below, the MAC address of the switch is marked. Enter the command stp root secondary on the SWD switch. Which of the following switche will be the root bridge of this network?
Answer: A
62D. The company has users who report !hal when using SIss network to transfer files, the speed is very taw. The administrator uses Wireshark software to capture packets m the nelerork and hods some Ouphcale frames. Which of 11e honosiiing
descrkhion is correct ebonite reason or solution?
❑ A The switching equipment of he company network must be upgraded
❑ B. The network nos a loop on the second floor (flight Answers)
ci a No PLAN is configured In the network
❑ D. When the switch fennel find the destination MAC address of the data frame in the MAC address tribe, the swath wIt Rood the dais frame.
Answer, 0
621. Dynamic routing protocols can automatically adapt to changes in network topology.
❑ A. True (Right Answers)
❑ 11 False
Answer: A
622. The output information of the router R1 routing table is as follows. Which of the following statements are correct? (Multiple Choice)
❑ A. The packet with the destination address of 10.0.2.2 is forwarded through Ethernet0/0/1 . (Right Answers)
❑ B. The packet with the destination address of 10.0.1.1 is forwarded through the Ethernet0/0/0 interface. (Right Answers)
❑ C. The packet with the destination address of 10.1.1.1 is forwarded through the GigabitEthernet0/0/0 interface.
❑ D. The packet with the destination address of 10.0.2.1 is forwarded through the Ethernet0/0/2 interface. (Right Answers)
Answer: ABD
623. All interfaces of the router belong to the same broadcast domain.
❑ A. True
❑ B. False (Right Answers)
Answer: B
624. Which of the following is correct about the command configured for the default route?
❑ A. [Huawei] ip route-static 0.0.0.0 0.0.0.0 192.168.11 (Right Answers )
❑ B. [Huawei-Serial0] ip route-static 0.0.0.0 0.0.0.0 0.0.0.0
❑ C. [Huawei] ip route-static 0.0.0.0 255.255.255.255 192.168.1.1
❑ D. [Huawei] ip route-static 0.0.0.0 0.0.0.00.0.0.0
Answer: A
625. What are the advantages of using DHCP to allocate IP addresses using Dynamic Host Configuration Protocol? (Multiple Choice)
❑ A. Can achieve IP address reuse (Right Answers)
❑ B. Avoid IP address conflicts (Right Answers)
❑ C. Heavy workload and poor management
❑ D. The configuration information changes (such as DNS), only the administrator needs to modify it on the DHCP server to facilitate unified management. (Right Answers)
Answer: ABD
626_ As shown in the following figure, Router A has passed the IP address 10 0_122 Telnet Router B In the current interface, which of the following operations will cause the Telnet session of the router to be interrupted with router, (Multiple
Choice)
Answer: AB
627. When a port of a switch receives a non-carried VLAN TAG data frame, it must add a PVID.
❑ A. True (Right Answers)
❑ B. False
Answer: A
628_ Which of the following parameter cannot be used for advanced access control lists?
❑ A. Physical interface (Right Answers)
❑ B. Time range
❑ C. Destination port number
❑ D. Agreement number
Answer: A
629 The AGL does not filter the traffic that the device itself generates to access other devices. Only the forwarded traffic is filtered. The forwarded traffic includes traffic that other devices access the device.
❑ A True (Right Answers)
❑ B. False
Answer: A
630. An AGL rule is as foIlows: Which of the following IP addresses can be matched by the permit rule? (Multiple Choice)
Rule 5 permit ip source 10.9.1.0 255.0.254.255
❑ A. 7_1.2.1
❑ B_ 6.1.3_1 (Right Answers)
❑ a 8.2.2_1
❑ D_ 9.9_1_1 (Right Answers)
Answer: BD
631. The router output information is as follows. Which IPv6 address is obtained by this interface?
❑ A. 2000..1/64
❑ B. 3000::2/64 (Right Answers)
❑ C. 3000::3000164
❑ D. 3000::1/64
Answer: B
632. The router's Router ID neighbor relationship is as follows. Which of the following statements are correct? (Multiple Choice)
❑ A. The router and the router with Router-ID 10.5.3.3 cannot exchange the link status information. (Right Answers)
❑ B. This router is a DR Other router (Right Answers)
❑ C. The router-ID of the DR router is 10.0.1.1. (Right Answers)
❑ D. The router-ID of the DR router is 10.0.0.2. (Right Answers)
Answer: ABCD
633. Which area number does OSPFv3 use to identify the backbone area?
❑ A. 0 (Right Answers)
❑ B. 3
❑ C. 1
❑ D. 2
Answer: A
634. A router OSPFv3 adjacency relationship is as follows. The router is an ABR.
Answer: A
635. Which of the following type of addresses are not included in the IPv6 address?
• A. Anycast address
O B. Broadcast address (Right Answers)
❑ C. Multicast address
O D. Unicast address
Answer: B
636. If the network address of a network is 10.1.1.0/30, what is its broadcast address?
O A. 10.1.1.4
O B. 10.1.1.2
❑ C. 10. 1. 1.3 (Right Answers)
O D. 10.1.1.1
Answer: C
637. If the network address of a network is 192.168.1.0, then its broadcast address must be 192.168.1.255.
❑ A. True
❑ B. False (Right Answers)
Answer: B
638. Which of the following are correct about the analysis of ICMP packets? (Multiple Choice)
❑ A. ICMP packets are encapsulated in IP packets and are not encapsulated in the transport layer. (Right Answers )
❑ B. ICMP packets cannot be used to detect MTUs in a path.
❑ C. ICMP messages can record time, including original time, receiving time, and sending time. (Right Answers)
❑ D. ICMP protocol does not support redirection function
❑ E. ICMP packets contain ICMP error packets, control packets, request/response packets, and refresh packets.
Answer: AC
639. When the router is powered on, the configuration file is read from the default storage path for initialization of the router.
If there is no configuration file in the default storage path, what does the router use for initialization?
❑ A. Current configuration
O B. New configuration
O C. Default parameters (Right Answers)
O D. Initial configuration
Answer: C
640. In the STP protocol, which of the following factors will affect the election of the root switch? (Multiple Choice)
❑ A. Switch interface ID
O B. Switch interface bandwidth
❑ C. IP address of the switch
O D_ The current MAC address of the switch (Right Answers)
❑ E. Switch priority (Right Answers )
Answer: DE
641. As shown in the following figure, all switches run STP, when the topology is stable.
The SWA device is powered off. Which of the following statements are correct? (Multiple Choice)
Cl
Answer: CD
642. As shown in the figure, all four switches run STP, and each parameter adopts the default value.
When a port on the root switch is blocked and cannot be sent through the port, how long will the port in the network enter the forwarding state?
❑ A. About 15 seconds
❑ B. About 50 seconds (Right Answers)
❑ C. About 30 seconds
❑ D. About 3 seconds
Answer: B
643. Which of the following port states does the RSTP protocol include? (Multiple Choice)
❑ A. Forwarding (Right Answers)
❑ B. Discarding (Right Answers)
❑ C. Listening
❑ D. Learning (Right Answers)
Answer: ABD
644. As shown in the figure below, all hosts can communicate normally. Which of the following statements are correct? (Multiple Choice)
Answer; AC
645 The Layer 2 switch belongs to the data link layer device and can identify the MAC address information in the data frame, forward the data according to the MAC address, and record the MAC address and the corresponding pod information
in its own internal MAC address table.
JA True (Right Answers)
rl B. False
Answer, A
646. Which of the following description is wrong about the Layer 2 Ethernet switch?
❑ A. Layer 2 Ethernet switch works at the data link layer
❑ Et. Ability to learn MAC address
❑ C_ Forward according to the Layer 2 header information of the Ethernet frame
❑ fr It is necessary to make certain modifications to the three-layer header of the forwarded message, and then forward it_ (Right Answers )
Answer: D
647_ if the network shown in the folbwmg figure is used to enable loopback 0 communication between Router A and Router B through static routes, which of the following command should be entered in Router A?
Answer: C
648_ As shown in the figure, regarding OSPF topology and configuration, which of the folbwing statement is correct?
❑ A Compared RI with R2, R2 has a better chance of becoming a OR because its interface OR priority value is smaller
❑ B RI and R2 can establish stable neighbor relationships as long as the interface network type of RI is restored to the default broadcast type.
❑ C_ As long as the interface network type of RI is restored to the default broadcast type, and the hello time is adjusted to 10s, RI and R2 can establish a stable neighbor relationship (Right Answers)
❑ CI RI and R2 can establish stable OSPF neighbor relationships
Answer: C
E49 As shown in the following figure, the following configurations exist on the Router A Which of the following statements are correct? (Multiple Choice)
ip mute-static 10 02 2 255 255.255 25510 0.12 2
ip route-static 10_0 22 255 255 255 255 10 0 21 2 preference 40
❑ A. if the port GO/0/1 is Down, the interface that reaches 10.0.2.2 in the routing table of Router A is changed to GO/0/2.
❑ B_ if the GO/0/2 port is Down, the interface that reaches 100 22 in the routing table of Router A is changed to GO/0/1_ (Right Answers)
❑ C_ The interface that reaches 10 02 2 in the routing table of Router A is GO/0/1
❑ D. The interface that reaches 10.0.2.2 in the routing table of Router A is GO/012. (Right Answers )
Answer: BD
650 As shown in the broadcast network, OSPF mns on four routers and in the same area and on the same network segment. OSPF automatically elects a OR Multiple BORs to achieve better backup results.
❑ A True
❑ B_ False (Right Answers)
Answer: B
651. When logging in to the router through Telnet, which authentication methods can choose? (Multiple Choice)
❑ A. AAA local authentication (Right Answers)
❑ B. Not certified
❑ C. password authentication (Right Answers)
❑ MD5 ciphertext authentication
Answer: AC
652. The packet that the DHCP server responds to the client must be a unicast packet.
❑ A. True
❑ B. False (Right Answers)
Answer: B
653. Link aggregation is a common technique in enterprise nehvorks. Which of the following descriptions are the advantages of link aggregation technology? (Multiple Choice)
❑ A Improve reliability (Right Answers)
❑ B Improve safety
❑ C. Increase bandwidth (Right Answers)
❑ D Implement load sharing (Right Answers)
Answer: ACD
654 A switch receives a data frame with a VLAN tag, tut finds that the destination MAC address of the data frame is not queried in its MAC address table which is the processing behavior of the switch for the data frame ,
❑ A The switch will drop this data frame
❑ B The switch broadcasts this data frame to all Access ports.
❑ C The switch broadcasts this data frame to all ports (except the receiving part) in the VLAN that belongs to the data frame (Right Answers)
❑ El The switch broadcasts the data frame to all ports
Answer: C
655 In order to check whether the serial port SO/D/1 on the router is a DTE interface or a BCE interface, which of the following commands should he used?
❑ A. display interface 80/0/1 (Right Answers )
❑ B. display current-config
❑ C. display saved-config
❑ D display controller serial
Answer: A
656. Which of the following types of ACLs can match the transport layer port number?
❑ A. Intermediate ACL
❑ B. Advanced ACL (Right Answers)
❑ C. Layer 2 ACL
❑ D. Basic ACL
Answer: B
Answer: C
658. Which protocol packet is required to bear for DHCPv6 packets?
O A. FTP
O B. TCP
O C. UDP (Right Answers)
O Di_ HTTP
Answer: C
659. Which statements are correct about IPv6 address configuration? (Multiple Choice)
O A. FRC addresses can only be manually configured.
O B. IPv6 supports DHCPv6 format for address configuration (Right Answers)
I=1 C. fPv6 supports stateless autoconfiguration (Right Answers)
O D. [Pv6 address supports multiple ways of automatic configuration (Right Answers)
Answer: BCD
660. The multicast address of the requested node corresponding to 2001 . •12:1 is FF02::1:FF12:1.
O A. True (Right Answers)
E B. False
Answer: A
661 The client has an error accessing the FTP server. Checking that there is no problem with the connectiviy between the server and the client is it possibly caused by which of the following server ports are blocked? (Multiple Choice)
El A 21 (Right Answers)
❑ B 20 (Right Answers)
❑ C 50049
❑ D 80
Answer: AB
662. Which fields are not included in the network layer header format?
D A. TTL
LI B. Source IPv4 Address
LI C. Sequence Number (Right Answers)
❑ D_ Destination IPv4 Address
Answer: C
663. Which of the following descriptions are correct if en AR2200 router needs to be restored to its initial configuration? (Multiple Choice)
❑ A. Re-specify the configuration file to be loaded next time
171 B. Reset the saved configuration (Right Answers)
171 C. Clear current configuration
171 D. Restart the AR2200 muter (Right Answers)
Answer: BD
664. The administrator wants to completely delete the old device configuration file config.zip›, then which of the following command is correct?
❑ A. delete /unreserved config.zip (Right Answers)
❑ B. delete /force config.zip
❑ C. clear config.zip
❑ D. reset config.zip
Answer: A
665. In which of the folowing cases does the switch generate configuration BPDUs? (Multiple Choice) A. During the initialization process, as tong as the port is enabled with STP, the configuration BPDU wit be sent from the designated port
according to the interval specified by the Heto Time timer B. When the root port receives the configuration BPDU, the device where the root port resides sends configuration BPOUs from each of its designated ports. C. When a non-designated
port receives a configuration BPDU that is worse then itself, it immediately sends its own BPDU to the downstream device. D. When the designated port receives a configuration BPDU that is worse then itself, it will immediately send its own
BPDU to the downstream device. Answer ABD
❑ A.select this to commit (Right Answers)
Answer. A
666The port cost calculated by STP has a certain relationship with the port bandwidth, that is, the larger the bandwidth, the () the overhead.
❑ A. Consistent
❑ B. Not necessarily
❑ C. bigger
❑ D. smaller (Right Answers)
Answer: D
667. In the RSTP protocol, the PIA mechanism requires that the link between two switching devices be in point-to-point full-duplex mode.
❑ A. True (Right Answers)
❑ B. False
Answer: A
668. The output information of a router is as follows. Which of the following statements are correct? (Multiple Choice)
Answer: ACID
669. Which of the following commands can enable the DHCP relay function of the router interface?
❑ A. dhcp select server
❑ B. dhcp select global
❑ C. dhcp select interface
❑ dhcp select relay (Right Answers)
Answer: DI
670 As shown in the following figure, Switch A and Router A are;connected through two link, The two links are in the manual load balancing mode_ The aggregation port number is 1, and the aggregation link needs to forward data. Carrying
VLAN TAG 100, which configuration does Router A need to use? (Multiple Choice)
❑ A. interface Eth-Trunkl port ImIk-type trunk port trunk allow-pass Nan 100 # interface GmabilEthernet0/0/1 eth-trunk 1 #
❑ El_ interface GmabilEtherneta/0/1 eth-trunk 1 4 interface GmabilEthernet0/0/2 eth-trunk 1 (Right Answers)
❑ C. interface Eth-Trunkl mode lacp-static port link-type trunk port trunk allow-pass Nan 100 4 interface GmabilEthernell)/0/1 eth-trunk 1 # interface GmabilEthernet0/0/2 eth-trunk 1 4
0 B. interface Eth-Trunkl undo portswitch # interface Eth-Trurnkl _100 doll q termination vrd 100 ip address 10 0 122 255 255 2550 arp broadcast enable # (Right Answers)
Answer: B0
071 As shown in the figure, the network administrator creates VLAN 2 on the SWA and SWB, and configures the pods connected to the hosts on the two switches es access ports and assigns them to VLAN 2 Configure 60/0/1 of SWA and
61:11012 of SWB as trunk pods to allow ail VLANs to pass_ To achieve normal cornmunIcehon between the two hosts, what do you need led do,
VI
A. ConTguro G0011 On the SWC as the monk pad and Way AII 2 1a pass. GArO1porl is se,as the amass pal and PVID 2
0 13. Create VLAN 2 on the SWC, configure 60.10/1 arid G0,012 as trunk pods, and alp," VLAN 210 pass. Might Amax.)
0 C. Create VLAN2 on the SWC.
D Configure .30.31,1 on the SWC as the trunk port and aBow VLAN 2 to pass.
Answer , B
672 If the Authenticator sends the wrong username and password to the Authenticator during The PPP authentication process, what type of message will the Authenticator send to the Authenticator?
0 A Authenticate-Reject
0 B. Authenticate-Ack
0 G. Authenticate-Nak
0 D. Authenticate-Reply
673. An ACL is a packet filter. The ACL is applied to the service module. The ACL takes effect_
1=I A. True (Right Answers )
I=1 B. False
Answer: A
674. An ACL rule is as follows: Which of the following iP addresses can be matched by the permit rule? (Multiple Choice)
rub 5 permit ip source 10.0.1.0 0.0.254.255
❑ A. 10.0.4.5
El B. 10_0.3.4 (Right Answers)
0 C_ 10_0_1 2 (Right Answers)
El D. 10.0.2.3
Answer: BC
675. When an iPv6 interface receives a packet whose Hop Limit class has a value of 1, the packet is not forwarded.
0 A. True (Right Answers)
❑ B. False
Answer: A
676_ By default ; how many seconds is the ❑SPFv3 adjacency Deadtime on a P2P link?
❑ A. 40 (Right Answers)
❑ B. 10
❑ C. 20
❑ D. 30
Answer: A
677 An explicit path can be easily defined by SR (Segment Routing), and nodes in the network only need to maintain Seament Routing information. It can respond to the real-time rapid development of business.
What are the following characteristics of Segment Routing? (Multiple Choice)
❑ A Support both the centralized control mode of the controller and the distributed control mode of the repeater. Provides a balance between centralized control and distributed control (Right Answers)
❑ B SR (Segment Routing) uses IP forwarding without additional maintenance of another label forwarding table.
❑ C A better smooth evolution of existing networks by extending existing protocols such as IGP (Right Answers)
❑ D Using source routing technology to provide rapid interaction between the network and upper-layer applications (Right Answers)
Answer: ACD
678. Which of the following statement about MPLS Label tags is wrong?
❑ A. The tag is encapsulated between the network layer and the data link layer (Right Answers)
❑ B. The label is used to uniquely identify the forwarding equivalence class FEC burned by a packet.
❑ C. The label is carried by the header of the packet and does not contain topology information.
❑ D_ The tag is a short identifier with a fixed length and only local significance.
Answer: A
679. Which statement is correct about the VRP operating platform shortcuts? (Multiple Choice)
❑ A. CTRL+Z returns to the user view (Right Answers)
❑ B. CTRL+C stops the running of the current command (Right Answers)
❑ C. Move the left cursor key (<--) to the left by one. (Right Answers)
❑ D. TAB prompts for the most recently entered command
Answer: ABC
680.<Huawei>system-view
[Huaweiluser-interface console 0
[Huawei-ui-console0] user privilege level 15
[Huawei-ui-consoleOlauthentication-mode password
[huawei-ui-console0] set authentication password cipher huawei2012
[Huawei-ui-consoleO]guit
Which statement is wrong about the above configuration command?
❑ A. The user who logs in to the device through the console has the highest user prMlege level.
❑ B. The administrator wants to log in and manage the device through the console port.
❑ C. After the configuration is completed, the administrator cannot implement device management through remote login.
❑ ❑ The password of the user who logs in to the device through the console is cipher huawei2012 (Right Answers)
Answer:
681. In the switch, which of the following is the technology of port and MAC binding?
❑ A. SEP
❑ B. NAT
❑ C. ACL
❑ D. Port Security (Right Answers)
Answer: D
682. Which of the following information does the switch MAC address table not include?
❑ A. MAC address
❑ B. Port number
❑ C. IP address (Right Answers)
❑ D. VLAN
Answer: C
683. What port states might exist on a switch with standard STP protocol enabled? (Multiple Choice)
❑ A. Discarding
❑ B. Listening (Right Answers)
❑ C. Disabled (Right Answers)
❑ D. Forwarding (Right Answers)
Answer: BCD
684. Which of the following routing protocols has the highest priority?
❑ A. Direct (Right Answers)
❑ B. RIP
❑ C. OSPF
❑ D. Static
Answer: A
685. Referring to the output result shown in the figure, it can be judged that the routing table of the router is composed of a direct route and a static route.
Answer: A
686. Which of the following description is correct about the display information?
❑ A. GigabitEthemet 0/010 interface was manually closed by the administrator. (Right Answers)
❑ B. GigabitEthernet 0/0/0 interface is not configured with an lP address.
❑ C. GigabitEthernet 0/0/0 interface does not enable dynamic routing protocol
❑ D. GigabitEthernet 0/0/0 interface is connected with a wrong cable.
Answer: A
687. The output information of a link aggregation port of a switch is as follows. If you want to delete Eth-Trunk 1, which of the following command is correct?
Answer: B
688. If an Ethernet data frame Length/Tyme=0z8100, which may be the payload of this data frame? (Multiple Choice)
❑ A. TCP data segment (Right Answers)
❑ B. UDP data (Right Answers)
❑ C. ICMP packet (Right Answers)
❑ D. ARP packet (Right Answers)
Answer: ABCD
689. As shown in the figure, a static NAT command is deployed on the router R1. When the PC accesses the Internet, the destination address in the packet will not change.
Answer: A
690. What level of encapsulation format is defined by the PPP protocol in the OBI reference model?
❑ A. Network layer
❑ B. Data link layer (Right Answers )
❑ C. Presentation layer
❑ D. Application layer
Answer: B
691. Which of the following authentication methods does not require to input a username and password?
❑ A. authorization-mode hwtacacs
❑ B. authentication-mode local
❑ C. authentication-mode hwtacacs
❑ D. authentication-mode none (Right Answers)
Answer: D
692. When forwarding a IPv6 packet, the router needs to find the routing table based on the source FP address of the [P6 packet.
❑ A. True
❑ B. False (Right Answers)
Answer: B
693. Which order is the 081 reference model from the upper layer to the lower layer?
❑ A. Application layer, session layer, presentation layer, transport layer, network layer, data link layer, physical layer
❑ B. Application layer, transport layer, network layer, data link layer, physical layer
❑ C. Application layer ; presentation layer, session layer ; transport layer ; network layer, data link layer, physical layer (Right Answers)
❑ D. Application layer, presentation layer, session layer, network layer, transport layer, data link layer, physical layer
Answer: C
694. Network administrators use Ping to test network connectivity. Which of the following protocols might he used in the process? (Multiple Choice)
❑ A ARP (Right Answers)
❑ B. TCP
❑ C ICMP (Right Answers)
❑ D. UDP
Answer: AC
695. As shown in the figure, it can be judged that 00e0-fc99-999 is a specific host MAC address learned by the switch through ARP, and the host has changed the IP address three times.
❑ A. True
❑ B. False (Right Answers)
Answer: B
Answer: C
697. Which of the following OSPF protocol packets can ensure the reliability of the LSA update?
❑ A. [SACK (Right Answers)
ID B. LSR
❑ C. DD
❑ D. LSU
Answer: A
698 Which of the following protocols does not belong to the file transfer protocol?
❑ A. SFTP
❑ B TFTP
❑ C. FTP
❑ D. HTTP (Right Answers)
Answer: 0
699. Apply the following ACL to Telnet:
Aci number 2000
Rure 5 permit source 172.16.105.20
Answer: A
700.[RTA] ac12002
[RTA-acl-basic-2002] rule deny source 172.16.1.1 0.0.0.0
[RTA-acl-basic-2002] rule deny source 172.16.0.0 0 255.0.0
Using the ACL matching route entry shown above on the router RTA, which of the following entries will be matched? (Multiple Choice)
❑ A. 192.17.0.0/24
❑ B. 172.16.1.1/32 (Right Answers)
❑ C. 172.16.1.0/24
❑ D. 172.48.0.0/16 (Right Answers)
Answer: BD
701. Which type of ACL does the following command belong to?
rule permit 8021p 7
❑ A. Layer 2 ACL (Right Answers)
D B. Basic ACL
❑ C. Advanced ACL
❑ D. Intermediate ACL
Answer; A
702. How many bits does the total length of an IPv6 address increase over IPv4?
❑ A. 32
❑ B. 96 (Right Answers)
❑ C. 64
❑ D. 128
Answer: B
Answer; C
704. If the 1171v6 host wants to send packets up to 10 routers, which parameter should be modified in the Pve header?
❑ A. Next Header
❑ B. Version
❑ C. Hop Limit (Right Answers )
❑ D. Traffic Class
Answer: C
705_ There are two routers RTA and RTB between the source device and the destination device. Use the Traced command to detect the path. When the first hop RTA is detected, the source device sends a UDP packet with a TTL of 1 to a larger
port of the destination device. When the packet reaches the RTB, the TTL becomes 0, and the RTA responds to the source device. ICMP message.
A Echo Request
B. Port Unreachable
o C. Time Exceeded (Right Answers)
LI D. Echo Reply
Answer: C
706. This is the three packets that the administrator has captured on the network. Which of the following statements is incorrect?
Answer: C
707. The administrator needs to configure the IP address on the G0f0/0 interface of the router. Which of the following address is correct to use?
❑ A. 145.4.2.55/26 (Right Answers)
❑ B. 237.6.1.2124
❑ C. 127.3.1.4128
❑ D. 192.168.10.112130
Answer: A
708. The subnet mask of a network segment 150.25.0.0 is 255.255.224.0, then which is the valid host address in the network segment? (Multiple Choice)
❑ A. 150.25.2.24 (Right Answers)
❑ B. 150.15.3.30
❑ C. 150.25.0.0
❑ D. 150.25.1.255 (Right Answers)
Answer: AD
709. How many port states does the RICMP protocol have?
O A. 2
O B. 4
❑ C. 3 (Right Answers)
O D. 1
Answer: C
710. A router running OSPF can reach the FULL state after completing the LSDB synchronization.
❑ A. True (Right Answers)
❑ B. False
Answer: A
711. Which of the following is not included in the routing table?
❑ A. MAC (Right Answers)
❑ B. Destination/Mask
❑ C. Cost
❑ D. NextHop
Answer: A
/12. Which descriptions are correct about DD packets and LSA in OSPF? (Multiple Choice)
❑ A. The head of the LSA can uniquely identify an LSA. (Right Answers)
❑ B. The DO packet contains only the header information of the LSA. (Right Answers)
❑ C. DO packet contains LSA details
❑ D. LSA head is only a small part of the LSA (Right Answers)
Answer: ABD
713. As shown in the figure, the network administrator wants to manually aggregate the two physical links between SWA and SWB into one Eth-trunk link; which of the following description is correct?
Answer: A
114. Which descriptions are correct about the Ethernet subinterface? (Multiple Choice)
❑ A. The subinterface cannot be configured with an IP address.
❑ B. A subinterface can be bound to multiple VLANs (Right Answers)
❑ C. The [P address of the sub-interface cannot belong to the same network segment. (Right Answers)
❑ D. The subinterface ID should be the same as the VLAN 10
Answer: BC
115. Ethernet frames are processed and forwarded in the form of ULAN TAGs inside the switch .
❑ A. True (Right Answers)
❑ B. False
Answer: A
716_ As shown in the following figure, from the security point of new, Router A refuses to receive OSPF packets, GE packets, IGMP packets from G0/0/1 Which of the following command can funl this requirement?
❑ A act number 3000 mle 5 deny are rule 10 deny 89 rulc15 deny icmp # interface GmabitEthernet0/0/1 traffic-fitter inbound act 3000 #
❑ B acl number 2000 rule 5 deny 47 rule 10 deny 89 rule 15 deny 1 # interface GmabitEthernet0/0/1 traffic-filler inbound act 2000 # (Right Answers)
❑ G acl number 3000 rule 5 deny 47 rule 10 deny 89 rule 15 deny 1 # interface GmabitEthernet0/0/1 traffic-fitter inbound acl 3000 #
❑ B. acl number 3000 rule 5 deny are rule 10 deny ospf rule 15 deny icmp # interface GigabitEthernet0/0/1 traffic-fitter inbound acl 3000 #
Answer: B
117. What is the length of the Traffic Class field in the [Pv€ packet header?
O A. 4
❑ B. 8 (Right Answers)
❑ C. 2
❑ D.6
Answer: B
718. How many ways to generate a DHCP device unique identifier DUID?
❑ A. 3
❑ B. 2 (Right Answers)
❑ C. 4
❑ D_ 1
Answer: B
719 Which of the following descriptions are correct about IPv6? Choice)
❑ A. IPv6 address length is 128 bits. (Right Answers)
❑ B. !RC address length is 64 bits
❑ C. When an IPA packet has multiple extension headers the extension header must appear in an orderly manner (Right Answers)
❑ a When an IPv6 packet has multiple extension headers, the extension header can appear randomly
Answer: AC-
720 The packet capture tool captures an Ethernet frame and finds that the value of the Type/Length field of the frame is 0x0800 Which of the following descriptions are correct about the frame? (Multiple Choice)
❑ A The frame carves an IPX message.
❑ B The frame carries an IP packet (Right Answers)
❑ G The frame structure of the frame is the Ethernet_11 format (Right Answers)
❑ B. The frame structure of the frame is 802 3 format
Answer: BC
721 The MAC address table of a switch is as follows lithe switch receives a data frame with the destination AC of 5489-985-I8a 8 from the EthO/0/2 port, which of the following statement is correct?
Answer: C
722. The administrator plans to implement a route backup by configuring a static floating route. Which is the correct implementation method?
❑ A. The administrator needs to configure different protocol priority values for the primary static route and the alternate static route. (Right Answers)
❑ B. The administrator needs to configure different metrics for the primary static route and the standby static route.
❑ C. The administrator needs to configure different TAGs for the primary static route and the standby static route.
❑ D. The administrator only needs to configure two static routes.
Answer: A
723. Regarding the main function of the router; which of the following statements are wrong? (Multiple Choice)
❑ A. Establish routing tables through multiple protocols
❑ B. Guide data forwarding according to the routing table
❑ C. Forward according to the source IP address of the received packet (Right Answers)
❑ D. Realize communication between devices on the same network segment (Right Answers)
Answer: CD
724. The administrator finds that the file cannot be transferred to the Huawei AR200 router through TFTP. What is the possible cause?
0 A. TCP port 69 of the TFTP server is disabled
❑ B. The username on the TFTP server does not exist.
O C. The username and password on the TFTP server have been modified.
O D. UDP port 69 of the TFTP server is disabled (Right Answers)
Answer: D
725. As shown in the following figure, the switch configuration information is as follows. Which of the following statements are correct? (Multiple Choice)
Answer: ABC
726. Which of the following descriptions are correct about the PPP? (Multiple Choice)
❑ A PPP supports bundling multiple physical links into logical links to increase bandwidth (Right Answers)
❑ B. PPP supports plaintext and ciphertext authentication (Right Answers)
❑ C. PPP is not scalable and cannot be deployed on an Ethernet link.
❑ 0. For the physical layer, PPP supports asynchronous links and synchronous links. (Right Answers)
❑ E. PPP supports multiple network layer protocols such as 'PCP and IPXCP. (Right Answers)
Answer: ABDE
727. The PPPoE client sends a PADI message to the server, and the server replies with a PADO message. What frame is the PADO packet?
❑ A. Multicast
❑ B. Broadcast (Right Answers)
❑ C. Unicast
❑ D. Anycast
Answer: B
728. The following rules exist in an ACL of the router: rule deny tcp source 192.168.1.0 0.0.0.255 destination 172.16.10.1 0.0.0.0 destination-port eq 21
Which of the following statement is correct?
o A. The source IP address is 192.168.1.1, the destination IP address is 172.16.10.1, and all TCP packets with the destination port number 21 match this rule. (Right Answers)
o B. The source IP address is 192.168.1.1, the destination IP address is 172.16.10.2, and all TCP packets with the destination port number of 21 match this rule.
o C. The source IP address is 192.168.1.1, the destination IP address is 172.16.10.3, and all TCP packets with the destination port number 21 match this rule.
o D. The type of ACL is basic ACL.
Answer: A
729. Which of the following IPv6 extension headers can appear twice?
❑ A. Destination option extension header (Right Answers)
❑ B. Fragment extension header
❑ C. Upper layer protocol data message
❑ D. hop-by-hop option extension header
Answer: A
730. When the host uses the stateless address autoconfiguration scheme to obtain an IPv6 address, the DNS server address information cannot be obtained.
❑ A. True (Right Answers)
❑ B. False
Answer. A
731 Which of the following packets is sent by the DHCPv6 client before sending a request packet to the DHCPv6 server?
P A RA
❑ 6 RS (Right Answers)
❑ C. NA
❑ 0. NS
Answer: B
732. Which type does the IPv6 address FE80::2E0TCFF:FE6F:4F36 belong to?
❑ A. Multicast address
❑ B. Link-local address (Right Answers)
❑ C. Global unicast address
❑ D. Anycast address
Answer: B
733. In the DHCPv6 stateless automatic allocation scheme, the host does not need to send any DHCPv6 packets.
❑ A. True
❑ B. False (Right Answers)
Answer, B
734. The last option field of IPv4 is variable length optional information. What is the maximum Length of this field?
❑ A. 40B (Right Answers)
❑ B. 20B
❑ C. 60B
O D. 10B
Answer: A
735. Regarding the role of ARP protocol and packet encapsulation, which description is correct?
❑ A. The MAC address of the destination and the address of the UUID can be obtained through the ARP protocol.
❑ B. ARP protocol supports deployment on PPP links and HDLC links.
❑ C. ARP protocol is based on Ethernet encapsulation (Right Answers)
❑ D. Inverse ARP in ARP is used to resolve device names
Answer: C
736. The STP root switch is elected based on the priority of the switch. In RSTP, the switch priority and MAC address are compared at the same time.
❑ A. True
❑ B. False (Right Answers)
Answer: B
Answer:
738. A router learns routes to the same destination address through RIP, OSPF, and static routes. By default, VRP will ultimately choose which protocol to learn the route through?
❑ A. The routes learned by the three protocols are selected.
❑ B. Static routing
❑ C. OSPF (Right Answers)
❑ D. RIP
Answer: C
739. If the network administrator does not configure a backbone area, the router automatically creates a backbone area.
❑ A. True
❑ B. False (Right Answers)
Answer: B
740. What modes does device link aggregation support? (Multiple Choice)
❑ A_ Mixed mode (Right Answers)
❑ B_ Manual load sharing mode (Right Answers )
❑ C. Manual master mode
❑ D. LACP mode
Answer: AB
741. The output information of a sub-interface of a router aggregation port 1 is as follows. According to this information, which of the following statements are correct? (Multiple Choice)
❑ A. The sub-interface of the aggregation port carries the VLAN TAG 100 when forwarding the data frame.
❑ B. The IP address of the subinterface of the aggregation port is 10.0.12.2/24. (Right Answers)
❑ C. There are two links in the aggregation port. (Right Answers)
❑ D. The subinterface number of the aggregation port is 100. (Right Answers)
Answer: BCD
742. As shown in the figure, the RTA uses NAT technology and implements a many-to-many non-NAPT address translation by defining an address pool, so that hosts on the private network can access the public network. Assume that Mere are
only two public IP addresses in the address pool, and the addresses have been assigned to hosts A and B. If host C also wants to access the public network, which of the following description is correct?
- I A RTA assigns the last public network address to host C. and host B is kicked off the line.
0 B. Al hosts can use the public network address in turn to access the public nehvork.
0 C Host C cannot be assigned to the public network address and cannot access the public network. (Right Answers )
0 D. RTA assigns the first public network address to host C, and host A is kicked off the line.
Answer. C
743. The OSPFv3 interface information of a router is as follows. Which of the following statements are correct? (Multiple Choice)
Answer: ABD
Answer: D
Answer: A
746. The output information of a router is as follows. Which of the following statements are correct? (Multiple Choice)
Answer: ABD
747 A company applying for a Class C IP address segment needs to be evenly distributed to 8 subsidiaries. The largest subsidiary h. 14 computers. Different subsidiaries must be in different network segments. What should the subnet mask
be set to,
❑ A 255 255 255 240
❑ B 255 255 255.192
❑ C 255 255 255 0
❑ D 255 255 255 128 (Right Answers)
Answer: D
748. Which of the following commands can be used to check the session status of a PPPoE client?
❑ A. display ip interface brief
❑ B. display pppoe-client session packet (Right Answers)
❑ C. display pppoe-client session summary
❑ ❑. display current-configuration
Answer: B
Answer: A
750. The MPLS label header is encapsulated between the data link layer header of the message and the network layer header.
❑ A. True (Right Answers)
❑ B. False
Answer: A
1. An administrator wishes to manage the router in the remote branch office, which method can be
used?
2. An authenticator router has been configured with two domains named "Areal" and "Areal", following
which a user is created with the username "huawei" and the password "hello" for authentication. Which
domain does this user belongs to?
A. Areal domain
B. Areal domain
C. default domain (Right Answers)
D. Default_admin domain.
Answer: A
4.Refer to the configuration output.
The administrator configured the device using the commands in the configured output. Regarding these
commands which statements is false?
Answer: D
5. Users in the network discovered that the efficiency of a file transfer is low. The administrator
used wire shark to observe the network and discovered many duplicate frames. Which statement
correctly explains the reason for this?
A. The switch doesn't know the destination and has flooded frames
B. This network needs upgrading to use newer and more efficient switches.
C. The network has loops at the link layer (Right Answers)
D. The network has not been segmented using VLANs.
Answer: C
6.Refer to the graphic, three Layer 2 switches enabled with STP are connected to the same hub.
A. a (Right Answers)
B. -s
C. -d
D. -n
Answer: A
8. Packet encapsulation in the IPsec architecture is performed as shown. Which IPsec mode is being
used to encapsulate the packet?
A. Normal mod
B. Transport mod
C. Tunnel mode (Right Answers)
D. This encapsulation is wrong.
A. Use the command "undo shutdown" under the interface view for VLANIF10.
B. Assign a physical interface that has either an active of inactive physical state to VLAN 10.
C. Assign only a physical interface that has an active physical state to VLAN 10. (Right
Answers)
D. Add an interface that has an active physical state and a trunk port associated with VLAN 10.
Answer: C
10. Which of the following regarding Frame Relay DLCI are correct? (Multiple Choice)
A. DLCI is locally significant (Right Answers)
B. DLCI is allocated by DTE.
C. The range of DLCI value that can be used is from 16-1007 (Right Answers)
D. The same DLCI can be configured on different physical interfaces (Right Answers)
Answer: ACD
Answer: ABD
13.0n an FR network, the DLCI identifies a virtual circuit on an interface. The DLCI must be
unique during planning and deployment.
A. TRUE
B. FALSE (Right Answers)
Answer: F
14.A company applies for a class C IP address for subnetting, it has eight branches. The largest
branch has a subnet and should support at least 14 hosts. What would be an appropriate subnet
mask?
A. 255.255.255.0
B. 255.255.255.128
C. 255.255.255.192
D. 255 255.255.224 (Right Answers)
Answer: D
15. Two routers are configured with OSPFv3. OSPFv3 is enabled on ail interfaces of each router.
Which of the following is true in the event that the network administrator does not configure a Router-ID?
A. The IP address of the loopback 0 interface will be used as the router ID.
B. The IP address of the loopback 1 interface will be used as the router ID.
C. The IP address of interface GO/0/0 will be used as the router ID.
D. No router ID will be assigned to the router (Right Answers)
Answer: D
16.Refer to the graphic.
Four switches are operating using STP. One of the port interfaces on ROOT has failed. How long
will it take for the 'blocked' interface to change to a state of forwarding?
A. 30 seconds
B. 50 seconds (Right Answers)
C. 15 seconds.
D. 3 seconds.
Answer: B
Answer: A
18. Which of the following statements are true about the working modes of Ethernet interfaces?
(Multiple Choice)
Answer: AD
A. User-view.
B. System-view. (Right Answers)
C. Interface-view
D. Protocol-view
Answer: B
21. In the VRP system. the login timeout interval must be configured on the VTY interface
A. TRUE
B. FALSE (Right Answers)
22. Which of the following statements are true about PPP? (Multiple Choice)
A. PPP supports both synchronous and asynchronous links at the physical layer (Right
Answers)
B. The scalability of PPP is low, so PPP cannot be deployed on Ethernet links.
C. PPP supports both plain text and cipher text authentications (Right Answers)
D. PPP supports various network layer protocols, such as IPCP and IPXCP (Right Answers)
E. In PPP, multiple physical links can be bound to one logical link to increase bandwidth.
(Right Answers)
Answer: ACDE
23. A host has established a telnet connection with the router attached to interface G0/0/0. Which of
the following statements are correct? (Multiple Choice)
A. The destination MAC address of a frame sent by the host will be the MAC address of the
router interface GO/0/0 (Right Answers)
B. The destination MAC address of a frame sent by the host will be the MAC address of the switch.
C. The destination port number in a segment header will have a value of 80.
D. The destination IP address of a packet sent by the host will be the IP address of the Router
interface G0/0/0. (Right Answers)
24. Which of the following statements is true about ARP?
Answer: D
25. Which of the following statements about gratuitous ARP packets are true? (Multiple Choice)
A. A system can determine whether conflicting IP addresses are used by sending a gratuitous
ARP packet. (Right Answers)
B. A gratuitous ARP packet uses the same format as an ARP request packet. (Right Answers)
C. A gratuitous ARP packet can help to update an IP address
D. A gratuitous ARP packet uses the same format as an ARP reply packet.
Answer: AB
26. The administrator wishes to configure OSPF on a router in the network, however the router has
no loopback interface. Which value will be used as the router ID?
Answer: B
27.0n Huawei switches. VLAN 4095 cannot be created and VLAN 1 cannot be deleted.
Answer: A
Which of the following description is the advantages of link aggregation? (Multiple Choice)
Answer: ABC
28. Refer to the display information.
A. The switch will send a request to obtain the MAC address of 5489-98ec-f011.
B. The switch will report that the destination is unreachable and report this to the source.
C. The switch will flood the frame via ail ports, with exception of the port on which the frame
was received (Right Answers)
D. The switch will drop the frame because it does not have an entry in its MAC address table.
Answer: C
30. Which of the following statements about the PPP link establishment process are false? (Multiple
Choice)
A. In Dead phase. the physical layer is unavailable. When both communication devices detect that
the physical line is activated, the Link Dead phase transitions to the Establish phase, that is. the
PPP link establishment phase.
B. In Establish phase, the two devices perform LCP negotiation to negotiate the MRU,
authentication mode, and magic number.
C. In Network phase, the two devices perform NCP negotiation to select and configure a network
layer protocol and to negotiate network layer parameters.
D. After NCP negotiation succeeds packets can be sent over the PPP link and the devices enter
Terminate phase. (Right Answers)
E. PPP links support both half- and full-duplex modes (Right Answers)
Answer: DE
Answer: AC
32. An administrator wishes to update the VRP software of companyi—s AR2200 router. How can
this be achieved? (Multiple Choice)
A. The administrator can use FTP to transfer the VRP software, with the AR2200 router as
the FTP client. (Right Answers)
B. The administrator can use FTP to transfer the VRP software, with the AR2200 router as
the FTP server. (Right Answers)
C. The administrator can use TFTP to transfer the VRP software, with the AR2200 router as the
TFTP server.
D. The administrator can use TFTP to transfer the VRP software, with the AR2200 router as
the TFTP client. (Right Answers)
Answer: ABD
Which statements correctly explain the forwarding behavior between RTA and RTE? (Multiple
Choice)
A. When the network uses OSPF, data will be forwarded along the path via S1/0/0.
B. When the network uses RIPv2, data will be forwarded along the path via S1/0/0. (Right
Answers )
C. When the network uses OSPF, data will be forwarded along the path from via E0/0/1.
(Right Answers )
D. When the network uses RIFV2, data will be forwarded along the path via S2/0/0.
Answer: BC
34. Which of the following descriptions regarding the STP forwarding state is incorrect?
Answer: B
35. 0n the VRP, what is the function of the "interface vlan if Man-id>it command?
Answer: B
36. Which of the following technologies is used to bind MAC addresses to interfaces on a switch?
A. SEP.
B. Port security (Right Answers)
C. ACL.
D. NAT.
Answer: B
37. Which of the following commands can be used to display mapping relationship between
network address and DLCI?
A. display fr interface
B. display fr
C. display fr map-info (Right Answers)
D. display fr brief
Answer: C
38. Which of the following steps are necessary to configure OSPF on a Huawei router? (Multiple
Choice)
A. Configuration of a router ID
B. Enabling of an OSPF process (Right Answers)
C. Specifying an OSPF area. (Right Answers)
D. Configuration of the network segments within each area. (Right Answers)
39. A network administrator wishes to assign an IP address to a router interface GO/0/0. Which of
the following IP addresses can be assigned?
A. 192.168.10.112/30 El
B. 237.6.1.2/24
C. 45.4.2 55/26 (Right Answers)
D. 127.3.1.4/28
Answer: C
40. In Layer 2 mode, the transmission rate of an Eth-Trunk interface is determined by which of the
following? (Multiple Choice)
Answer: AC
41. Which of the following network types does OSPF support? (Multiple Choice)
Answer: ABCD
42. If a network's broadcast address is 172.16.1.255, which of the following addresses can be the
network address?
A. 172.16.2.0
B. 172.16.1.253
C. 172 16 1.128 (Right Answers)
D. 172.16.1.1
Answer: C
43. Refer to the configuration output.
Answer: AD
44. According to the following configuration results. which statement is true about RIP?
A. 6
B. 8 (Right Answers)
C. 101
D. 12
Answer: B
46.Refer to the graphic.
Answer: AC
In the private network, RTA dynamically assigns a public address from the address pool to hosts
without port translation. Host C wishes to access the public network while pool addresses are
assigned to Host A and Host B. What will occur as a result?
A. The first public address will be allocated to Host C, and Host A will be forced offline.
B. The last public address will be allocated to Host C, and Host B will be forced offline
C. Host C will be unable to forward traffic over the public network. (Right Answers )
D. All hosts will have access to the public network through pool address swapping.
Answer: C
48.150.25.0.0 is a network segment and its mask is 255.255.224.0. Which of the following are valid
host addresses? (Multiple Choice)
A. 150.25.0.0
B. 150.25.1.255 (Right Answers)
C. 150.25.2.24 (Right Answers)
D. 150.15.3.30
Answer: BC
A. DES.
B. MD5. (Right Answers)
C. AES.
D. None.
Answer: B
50. The IPv6 address architecture does not include which of the following address types?
A. Unicast.
B. Multicast
C. Broadcast (Right Answers)
D. Any cast.
Answer: C
Answer: D
53.0n Huawei devices, you can use the undo summary command to prohibit automatic route
summarization of RIFv2.
Answer: A
54. The authentication, authorization and accounting schemes and HWTACACS or RADIUS
server templates created on AR routers take effect only after being applied to a domain.
55.1f AAA authentication is used on Huawei devices and the remote server does not respond, the
authentication can be performed on network devices.
A. TRUE (Right Answers)
B. FALSE
Answer: A
56. UDP is connectionless oriented, which of the following must be used in order to ensure
reliability?
A. Internet Protocol.
B. Application Layer Protocol (Right Answers)
C. Network Layer Protocol
D. Transmission Control Protocol.
Answer: B
57.Which of the following items are included in static routes? (Multiple Choice)
Answer: ABC
58.Refer to the graphic.
Answer: A
60.0n the command line interface of Huawei AR routers, the role of the Save command is to Save
the current system time.
A. TRUE
B. FALSE (Right Answers)
Answer: B
61. During SW calculation, the port cost is associated with port bandwidth.
Which of the following statements about the relation between port cost and port bandwidth is
true?
Answer: A
62. A network requires a solution to allow 50 private IP addresses to be translated, however
only a single public address is available for use. Which conversion method can be used to
support this requirement?
A. Static NAT.
B. Dynamic NAT.
C. Easy-IP. (Right Answers)
D. NAPT.
Answer: C
63. There are two routers (RTA and RIB) between the source device and destination device.
The Tracert command is used to detect the path between the two devices. During detection of
the first hop (RTA). the source device sends a UDP packet with a TTL of 1 to an interface with
a large interface number on the destination device. The TTL turns to 0 when the packet arrives
at RTB, upon which RTA sends an ICMP_ message to the source device.
Answer: A
A. 30 (Right Answers)
B. 31
C. 32
D. 33
Answer: A
65.1n a broadcast address, all host bits are set to 1 and a broadcast address can be used as a
host address.
A. TRUE
B. FALSE (Right Answers )
Answer: F
66. Which of the following formats represent an accurate abbreviation of the IPv6 address
2031:0000:720C:0000:0000: 09E0:839A: 130B? (Multiple Choice)
A. System-view.
B. Router.
C. Quit. (Right Answers)
D. User-view.
Answer: C
68. STP improves network reliability and eliminates loops on switched networks.
A. TRUE (Right Answers)
B. FALSE
Answer: A
69. Which of the following statements are true about ICMP messages? (Multiple Choice)
A. ICMP messages can record time. including the original time, packet receiving time, and
packet sending time. (Right Answers)
B. ICMP messages are encapsulated in IP packets but not at the transport layer. (Right
Answers)
C. ICMP messages include error messages, control messages, request/response messages, and
update messages.
D. ICMP does not support redirection.
E. ICMP messages cannot be used to detect a path's MTU.
Answer: AB
70. To provide the information about the IP addresses that a user packet traverses along the path to
the destination, which of the following does Traced record in each expired ICMPTTL packet?
A. Destination port.
B. Source port.
C. Destination IP addresses.
D. Source IP address. (Right Answers)
Answer: D
71. ESight supports which of the following SNMP versions in order to manage devices? (Multiple
Choice)
Answer: ACD
72. When an access port receives a data frame in which the VLAN ID is the same as the PVID. the
access port strips the VLAN ID from the frame and forwards the frame directly
A. TRUE
B. FALSE (Right Answers)
Answer: B
Answer: B
74. Which of the following configurations regarding static route are correct? (Multiple Choice)
Answer: ACD
75.According to the default value of route preference on the VRP platform, which of the following
represent the correct sequence for direct route, static route, RIP and OSPF if they are listed from
high preference to low preference?
Answer: B
76. Which of the following statements about the information contained in a Database Description
packet are true? (Multiple Choice)
Answer: BCD
77. Refer to the graphic.
The network administrator needs to configure static NAT on RTA, in order to allow Host A to
communicate with Host C. Which command is correct?
Answer: D
78. In the case of Huawei router, what is the "-i" parameter in a Ping command issued on a VRP
operating system used to set?
Answer: A
79.Which of the following statements is true about the TTL field in an IP packet header?
Answer: C
80.Two routers establish an IPsec tunnel, which of the following does not need to be the same on
both peering devices?
A. Encapsulation mode.
B. Transform mode.
C. Proposal name. (Right Answers)
81. Which of the following VRP commands can be used to enter area 0 view? (Multiple Choice)
A. [Fluawei]ospf area 0
B. [Huawei-ospf-l]area 0 (Right Answers)
C. [Fluawei-ospf-I]area 0 0 0.0 (Right Answers)
D. (Fluawei-ospf-(]area 0 enable
Answer: BC
82. In SW, which of the following items may affect the selection of the root switch? (Multiple
Choice)
83. The network administrator has decided to configure link aggregation in the enterprise network.
Which of the following represent advantages of link aggregation? (Multiple Choice)
Answer: ABC
Interface GO/0/1 on SWA is a hybrid port in tagged mode with a PVID of 1 for which VLAN 2 is
permitted. Interface GO/0/1 on SWB is a trunk port, with a PVID of 1 for which VLAN is
permitted. Which of the following statements is correct?
85. Which of the following configurations regarding default route configuration is correct?
Answer: A
Answer: C
87. An administrator discovered he/she was unable to use TFTP to transfer files to the router.
Which of the following describes the likely reason for this?
Answer: C
88. Refer to the command output.
89. If the network mask is 255.255.240.0. which of the following are valid network address?
(Multiple Choice)
Answer: AD
90. Which of the following methods are supported by VRP to configure the router? (Multiple
Choice)
Answer: ABC
An administrator has configured OSPF on the two routers, following which he then implements the
command silent-interface s0/0/1 on RTA. What effect will this command have on the network?
(Multiple Choice)
A. The link information advertised by RTB will be maintained in the Link State Database of RTA.
B. The OSPF neighbor relationship will fail between two routers. (Right Answers)
C. The configuration will not affect the OSPF neighbor relationship between the two routers.
D. The link information advertised by RTB will no longer be maintained in the Link State
Database of RTA. (Right Answers)
92.0n VRP, the command lines are classified into four levels in increasing priority: Visit level.
Monitoring level, Configuration level, and Management level. At which level, the operator is
permitted to configure service but is not permitted to operate the file system?
A. Visit level.
B. Monitoring level.
C. Configuration level (Right Answers)
D. Management level.
Answer: C
93. What action does an access port take in the process of sending VLAN frames?
Answer: B
94. By default, the RIP-enabled interfaces on a Huawei router can receive broadcast and multicast
packets of RIPv2, as well as broadcast packets of RIPv1.
Answer: A
95. Which of the following statements about a designated port working in RIPv2 multicast modes
are true? (Multiple Choice)
96. What of the following statements is correct regarding Access Control List types and ranges?
Answer: C
97. According to the topology and configuration shown in the figure, an Eth-Trunk link can be set
up between the two switches on which LSW2 is the Actor.
98. Which of the following is correct regarding the configuration of the trunk port and access port
on a switch?
Answer: A
99. A router has learned two routes for the same network with the same prefix. One route has been
learned via OSPF with a metric of 4882, while the other route has been learned via RIPv2 with a
metric of 4. Which route(s) will be found in the routing table?
Answer: C
100.1f a network's address is 10.1 1.0/30. Which of the following addresses is the broadcast address?
A. A .10 1 1 1
B. 10 1 1.2
C. 10.1.1.3 (Right Answers)
D. a 10.1.1.4
Answer: C
101. According to the preceding VTY configuration, the user level is set to level 3, which is the
highest level.
[Huaweguser-interface vty 0 14
[Huawei-ui-vty0-141acl 2000 inbound
(Fluawei-ui-vty0-14juser privilege level 3
[Huawei-ui-vty0-14Jauthentication-mode password
Please configure the login password (maximum length 16): Huawei
A. TRUE
B. FALSE (Right Answers)
Answer: B
RTA is a PPPoE client. and following transmission of PADI, Server A responds with PADO packets to
RTA.
Which distribution method is used for sending PADO packets?
A. Unicast. (Right Answers).
103. Which of the following technologies can allow a host with IP address 10.0.0.1 to access the
internet?
A. Static route.
B. Dynamic route.
C. Route import.
D. NAT (Right Answers)
Answer: D
A. OSPFv1
B. OSPFv2.
C. OSPFv3. (Right Answers)
D. OSPFv4.
Answer: C
105. When both ends running PPP protocol detect that the physical link is active, the link state will
transit from dead to establish. Which of the following protocols is used to negotiate the link
parameters during this phase?
A. IP
B. DHCP.
C. LCP. (Right Answers)
D. NCP.
Answer: C
106. Two routers are connected via serial interfaces and the link-protocol is PPP, but the MRU of
two serial interfaces are different, in PPP LCP negotiated stage, what will happen?
107. Which of the following IPv6 addresses can be configured on a routers interface? (Multiple
Choice)
Answer: AD
108. In standard STP mode which of the following ports on non-root switches forward the BPDUs
with TC bits set generated by the root switch?
A. A .Root port
B. Backup port
C. Designated port (Right Answers)
D. D .Alternate port.
Answer: CH12-211-3
109. Refer to the graphic
A. Neither host will be affected, and therefore will be able to communicate with the peer.
B. Host A will be unable to connect to the router interface G0/0/0.
C. Host will be unable to communicate unless arp-proxy is enable on the router (Right
Answers)
D. The host will be unable to reach neither the local nor network destinations
110. In RSTP mode, interfaces in the Discarding state discard received data frames but maintain
the MAC address table based on received data frames.
A. TRUE
B. FALSE (Right Answers)
Answer: F
Answer: CD
Which of the following statements is correct regarding the configuration of the ACL on RTA?
Answer: A
113. In order to check if the interface serial 1/0/0 of the router is working in either DCE or DTE
mode, command () is used.
Answer: C
114 Trunk interfaces can send both tagged and untagged frames •
A. TRUE (Right Answers)
B. FALSE
Answer: A
115. An end system is unable to communicate with a DHCP server following the startup process.
Which IP address may be used by the client?
A. 0.0.0.0
B. 127.0.0.1
C. 169.254.213 (Right Answers)
D. 255.255.255.255
Answer: C
116. Which of the following commands is used to enable dynamic address mapping protocol in the
interface encapsulated with Frame Relay?
Answer: A
Answer: D
118. Refer to the configuration output.
A. au1
B. au2. (Right Answers)
C. au1 will be used. When au1 is deleted, users will use au2.
D. au2 will be used. When au2 is deleted, users will use au1.
119.In an RIP process on a Huawei device, which of the following configurations are correct for
advertising network 10.1.1.1/30? (Multiple Choice)
A. network 10.1.1.0
B. undo summary network 10.1.1.0
C. version 2 undo summary network 10.0.0.0 (Right Answers)
D. undo summary network 101.0.0
E. network 10.0.0.0 (Right Answers)
Answer: CE
120. NAFT differentiates IP addresses of different users based on protocol ID in TCP, UDP, or IP
packets.
A. TRUE
B. FALSE (Right Answers )
Answer: B
121. Which of the following statements regarding single area OSPF are correct? (Multiple Choice)
Answer: BC
122. An administrator wishes to configure a floating static route.
A. A The administrator is required to configure a different preference values for the primary
static route and floating static route. (Right Answers)
B. The administrator is only required to configure two static routes.
C. The administrator is required to configure different route tags for the primary static route and
floating static route.
123. If router does not match a specific route when forwarding a packet and there is no default
route. the router discards the packet directly.
Answer: A
124. In Huawei Devices, when NAFT uses a dynamic address pool, addresses in the pool can be
used repeatedly. That is, one IP address can be mapped to multiple intranet IP addresses.
Answer: A
The network administrator wishes to aggregate the two links as member interfaces of Eth-trunk 1.
Which statement is correct?
Answer: D
126.When an administrator first initializes the router, a warning is displayed.
Answer: C
127. Which of the following statements regarding static routing and dynamic routing is incorrect?
A. The static routing can be easily configured and managed on the enterprise network.
B. The use of dynamic routing is more convenient for the administrator to manage the network
following network convergence.
C. The static routing can automatically recover when a link failure is encountered. (Right
Answers)
D. Dynamic routing will use more resources than static routes.
Answer: C
128. Which of the following parameter settings for terminal emulation are correct when
configuring a Huawei router through the Console port?
A. 4800bps, 8 data bits, 1 stop bits, odd parity check, and no flow control.
B. 9600bps. 8 data bits. 1 stop bits, no parity check, and no flow control (Right Answers)
C. 9600bps, 8 data bits, 1 stop bits, even parity check, and hardware flow control.
D. 19200bps. 8 data bits, 1 stop bits, no parity check, and no flow control.
Answer: B
129. Which of the following route entries can be aggregated into 10.0.0.24/29? (Multiple Choice)
Answer: AC
130. Interface GO/0/1 on RTA contains a MAC address of 00e0-fc03-aa73 and is configured with
the IPv6 address 2001:: 2E0:FCFF:FE03:M73. Which method has been used to configure the
interface IPv6 address?
A. DHCPv6
B. Auto-link.
C. ARP.
D. EUI-64. (Right Answers)
Answer: D
131. A network administrator has been assigned the IP address segment 192.168.176.0/25, from
which he/she must allocate a subnet to support 20 users in the marketing department. Which IP
subnet best supports this requirement?
A. 192.168.176.0/25
B. 192.168.176.0/30
C. 192.168.176.48/29
D. 192.168.176.96/27 (Right Answers)
Answer: D
Answer: B
A. TRUE
B. FALSE (Right Answers)
Answer: F
134.Refer to the graphic.
A. Port interface GO/0/3 of switch A will shut down, as a BPDU has been received by the edge port.
B. Port interface GO/0/3 of switch A will forward the data normally and drop the BPDU sent by the
host to the switch.
C. Switch A will receive the BPDU and recaculate the port state of GO/0/3. (Right Answers)
D. Only Host A can send data out as before, the other devices linked cannot.
Answer: C
135. An administrator currently manages AR2200 devices in the network through a single
password. However the company wishes to introduce another two administrators and provide
unique user credentials and privilege levels for telnet access to the network devices
A. Configure three users under the AAA-view. and assign each a different password (Right
Answers)
B. The authentication mode must be changed to AAA (Right Answers)
C. Each administrator must be assigned a privilege level (Right Answers)
D. A public IP address must be assigned to each user for telnet access.
Answer: ABC
136. How many probe packets are sent for each TTL value by default when "tracery' is used to
detect the path along which packet is sent from source to destination?
Answer: A
137. Which of the following statements regarding the "port trunk allow-pass vlan all" command is
true?
A. The specified port allows all VLAN IDs to pass through (Right Answers)
B. The peer port connected to this port must have the same port trunk allow-pass vlan all command
configured.
C. The peer device connected to this port can dynamically determine which VLAN IDs are allowed
to pass through.
D. If the port default vlan 3 commands are run on the connected remote device, VLAN 3 will be
blocked between the two devices.
Answer: A
138. Which of the following commands is used to display the OSPF neighbor relationship
establishment?
Answer: C
On the interface serial 1/0/1 of RTA, the command "ip address unnumbered interface loopback 0"
has been configured. Which following statements are correct? (Multiple Choice)
A. Another DHCP server exists in the network and is allocating IP addresses to hosts that
happen to be within a closer proximity than the authorized DHCP server (Right Answers )
B. The hosts were unable to discover a DHCP server and therefore generated their own
address in the 169 254.0 0 address range (Right Answers)
C. The hosts were unable to discover a DHCP server and therefore generated their own address in
the 127.254.0.0 address range.
D. All addresses from the DHCP pool have been assigned (Right Answers)
Answer: ABD
A. TRUE
B. FALSE (Right Answers)
Answer: F
142. When two switches are connected through link aggregation, what are the requirements for the
interfaces on the two switches? (Multiple Choice)
A. The physical interface quantities of the interconnected switches are the same. (Right
Answers)
B. The physical interface rates of the interconnected switches are the same. (Right Answers)
C. The duplex modes of the physical interfaces on the interconnected switches are the same.
(Right Answers)
D. The physical interface IDs of the interconnected switches are the same.
E. The models of the optical modules used by the interconnected switches are the same.
Answer: ABC
143 If Frame Relay implements dynamic address mapping for the PVC which protocol will be
used?
A. LMI protocol
B. ARP protocol
C. C.RARP protocol.
D. D In ARP protocol (Right Answers)
Answer: D
144. Which of the following protocols is used in Frame Relay to map the address to DLCI
dynamically?
A. ARP protocol.
B. RARP protocol.
C. In ARP protocol (Right Answers)
D. MAP protocol.
Answer: C
145. Which of the following statements regarding link-state database and routing-table of a
"single" OSPF area are correct? (Multiple Choice)
A. The link-state databases that all routers build are identical. (Right Answers)
B. The link-state databases that all routers build are different.
C. The routing-tables that all routers calculate are different. (Right Answers)
D. The routing-tables that all routers calculate are identical.
Answer: AC
146. Which of the following statements regarding the routing table are correct? (Multiple Choice)
A. The next hop in the routing table is redundant because the outgoing interface can be used for
packet forwarding.
B. The routes from generated by different protocols have different preferences (Right
Answers)
C. The metrics of different routing protocols are comparable.
D. The metrics of different routing protocols are not comparable. (Right Answers)
Answer: BD
147. An ACL does not filter traffic generated by the Huawei device towards other devices, but only
filters forwarded traffic, including traffic generated by other devices to access the Huawei device.
Answer: T
148. Which of the following are the features of the default VLAN setting in a switch configuration?
(Multiple Choice)
B. By default, all ports on switches are member ports of a default VLAN. (Right Answers)
D. The IP address configured for a switch is applied only to a member port in the default VLAN.
149. Which of the following descriptions about IPv6 addresses are correct? (Multiple Choice)
Answer: BC
150. Which of the following statements regarding the verification of IP connectivity are false?
(Multiple Choice)
A. The ping 127.0.0.1 command can be used to check whether the network cable is correctly
inserted into the host's Ethernet port. (Right Answers)
B. The ping command with the host IP address as the destination can be used to verify that the
TCP^P protocol suite is functioning correctly. (Right Answers)
C. The ping command can be used to verify connectivity between the host and the local gateway.
D. The command "ipconfig /release" can be used to check connectivity problems between the
host and the local gateway. (Right Answers)
Answer: ABD
RTA is a PPPoE client, and sends PADI packets to Server A. which type message is used for
sending PADI packets?
A. Unicast.
B. Multicast
C. Broadcast. (Right Answers )
D. Anycast.
Answer: C
152. In RSTP mode, both alternate and backup ports cannot forward user traffic but can receive,
process, and send BPDU.
The host has a problem establishing a telnet connection with the router attached to interface
GO/0/0, which of the following steps can be used to help the administrator identify the problem?
(Multiple Choice)
154. In a broadcast address, all host bits are set to 1 and a broadcast address can be used as a host
address.
A. TRUE
B. FALSE (Right Answers)
Answer: F
The display stp brief command is used to check the summary STP information of a switch. With
regards to the output, which of the following statements is incorrect?
Answer: ABCE
157. In a small network supporting 1Pv6, a network administrator wants to implement RIPng.
Which of the following commands should be used to enable this protocol?
Answer: A
Which of the following statements is correct when this router forwards the packet to the destination
host 9.1.4.5?
A. The router selects the first entry to match the destination address of the packet because the
preference of OSPF is higher than the preference of RIP.
B. The router selects the second entry to match the destination address of the packet because the cost
of RIP is lower than that of OSPF.
C. The router selects the second entry to match the destination address of the packet because the
outgoing interface is an Ethernet interface. The forwarding speed of an Ethernet interface is
faster than the forwarding speed of a serial interface.
D. The router selects the second entry to match the destination address of the packet because
the router will match the most specific address. (Right Answers)
Answer: D
159. Refer to the graphic.
When R2 forwards data to R3 from R1, which of the following items will change? (Multiple Choice)
Answer: AB
160. A switch receives a VLAN tagged frame, but the destination MAC address can't be found in
the switches MAC address table, how will the switch react?
Answer: B
161. NAPT uses the same public IP address but different port numbers to translate private IP
addresses. Which statement regarding the port number is correct?
Answer: C
162. Refer to the graphic, after the ping 10.1.1.2 command is executed on R1, LSW1 receives a
tagged data frame from VLAN 10 on LSW2.
Answer: A
163. FTP and TFTP can be used to update the system file on Huawei routers. Which of the
following statements are correct? (Multiple Choice)
Answer: ABC
164. Refer to the graphic, the static NAT command is executed on R1.
When a PC connected to R1 accesses the Internet, the destination address in the packets does not
change.
Answer: T
165. While inspecting packets in the network, a network administrator discovers a frame with the
destination MAC address of 01-00-5E-A0-131-C3. What can the administrator determine from
this?
Answer: C
166. Refer to the graphic, the routing table includes direct routes and static routes and the
preference of the direct routes cannot be changed_
Answer: A
Following configuration, a host is connected to the interface Gigabit Ethernet 0/0/1 of the router.
Answer: A
169. Which of the following parameters must be considered during root port selection in STP?
(Multiple Choice)
Answer: ABC
170. In the VRP system, you cannot delete files by running the delete or unreserved vrpcfg.zip
command. You must clear files in the recycle bin.
A. TRUE
B. FALSE (Right Answers )
171. The IP address 192.168.1.127/25 represents a 0 address.
A. Host.
B. Network.
C. Multicast.
D. Broadcast. (Right Answers)
Answer: D
173. A port directly connects to a designated port on the peer device and is used to receive BPDU to
monitor the changes occurring in the network. However. it does not forward any packet. Which of
the following ports represents this port?
A. k Root Port.
B. Designated Port.
C. Alternate Port (Right Answers)
D. Disable Port.
Answer: C
174. A trunk interface allows frames from multiple VLANs including VLAN 4096.
A. TRUE
B. FALSE (Right Answers)
Answer: F
An administrator has configured RIPv2 on the two routers, following which he implements the
command silent-interface s0/0/1 on RTA. What effect will this command have on the network?
(Multiple Choice)
Answer: AD
176. A configured internal host of a private network wishes to access the intemet.
What must be configured on the enterprise network egress router in order to achieve this?
(Multiple Choice)
Answer: AD
177. The following figure shows the network topology and OSPF area partition. Routers R2, R3,
and R4 are OSPF ABRs but R1 is not.
A. TRUE
B. FALSE (Right Answers)
Answer: F
178. When a network administrator configures STP in the network, BPDU begin to be sent by
switch. Which of the following statements regarding the BPDU frame are correct? (Multiple
Choice)
A. A BPDU uses the IEEE 802.3 standard frame type (Right Answers)
B. A BPDU uses the Ethernet II standard frame type.
C. The BPDU frame's control field is 3. (Right Answers)
D. The destination MAC address field of a BPDU frame is a broadcast address.
Answer: AC
179. Refer to the graphics.
OSPF is used on four routers that are in the same area and on the same network segment. In this
scenario, OSPF selects one DR and multiple BDRs to ensure backup.
A. TRUE
B. FALSE (Right Answers)
Answer: F
180. As specified by the RSTP protocol. when a root port fails which type of port will function as a
new root port and enters the forwarding state without any delay?
A. Forwarding Port.
B. Alternate Port (Right Answers)
C. Backup Port
D. Edge Port
Answer: B
181. For project cutover, backup or adjustment of configuration files are not required during VRP
upgrade, because lost files can be found in the recycle bin.
A. TRUE
B. FALSE (Right Answers)
Answer: B
182. Refer to the graphic.
Communication should be established between Host A and Host B. VLAN 2 has been created on
SWA and SWB. The ports connected to the hosts are access ports and belong to VLAN 2. Port
interfaces GO/0/1 on SWA and GO/0/2 on. SWB are trunk ports and permit all VLAN to pass. All
that remains is for the administrator to configure SWC.
Answer: D
183. In ARP resolves the protocol address of the remote device on each virtual circuit, including IP
addresses and IPX addresses.
Answer: A
184. The PPPoE session establishment process can be divided into which stages? (Multiple Choice)
Answer: AC
185. The following configuration shows that the IP address of GEO/0/0 on a device is incorrect
because the IP address of the interface cannot end in 0.
A. TRUE
B. FALSE (Right Answers)
Answer: B
186. Which of the following statements about collision domains and broadcast domains are correct?
(Multiple Choice)
A. Devices connected to the same Hub form a collision domain (Right Answers)
B. Devices connected to the same hub form a broadcast domain. (Right Answers)
C. Devices connected to the same bridge form a collision domain.
D. Devices connected to the same bridge form a broadcast domain (Right Answers)
E. Devices connected to the same router form a broadcast domain.
Answer: ABD
<Huawei> system-view
Answer: B
188.0n Sx7 series switches, which of the following VLANs can be removed by using command
"undo"? (Multiple Choice)
A. vlan 1.
B. vlan 2. (Right Answers)
C. vlan 1024. (Right Answers)
D. vlan 4094. (Right Answers)
Answer: BCD
189. The users who log on the router through Telnet are not permitted to configure IP address.
What is the possible reason?
Answer: C
190. Refer to the graphic. Which of the following statements are correct? (Multiple Choice)
191. Following a failure of services in the network, an administrator discovered that the
configuration in one of the enterprise routers had been changed. What actions can be taken by the
administrator to prevent further changes? (Multiple Choice)
A. The administrator should limit access by setting the login privilege of users to level 0 (Right
Answers)
B. The administrator should configure AM to manage user authorization on the router (Right
Answers)
C. The administrator should configure an ACL to allow only the administrator to manage the
router (Right Answers)
D. The administrator should configure port-security on the router.
Answer: ABC
192. You can use the Telnet protocol to manage Huawei devices. Which of the following statements
is true?
A. TRUE
B. FALSE (Right Answers)
Answer: F
A. A user should enter T when wishing to clear the saved configuration file. (Right Answers)
B. The saved-configuration file that the device starts with can be erased. (Right Answers)
C. The saved-configuration will be deleted after typing N.
D. The saved-configuration file will be replaced with the current-configuration.
Answer: AB
195. In the RSTP standard, a port is able to connect to a terminal directly and enter the forwarding
state without delay. Which of the following ports represents such a port?
A. Fast port.
B. Backup port.
C. Root port.
D. Edge port. (Right Answers)
Answer: D
196. 0n Huawei AR G3 Series routers. which authentication modes does AM support? (Multiple
Choice)
Answer: ABC
197. In the PPPoE discovery stage, the PPPoE server assigns a session-id to the PPPoE client in
which packet?
A. PADI.
B. PADO.
C. PADR,
D. PADS. (Right Answers)
Answer: D
The network administrator wants to improve the performance of network transmission, what steps
can the administrator take? (Multiple Choice)
A. Change the working mode to full duplex of each end station. (Right Answers)
Answer: AB
199. According to the topology and configuration of interconnected interfaces of switches shown in
the figure, the data frame tagged with VLAN 10 can be forwarded correctly between the two
switches.
A. TRUE
B. FALSE (Right Answers)
Answer: B
200. Which of the following statements is true about the PPP configuration and deployment?
Answer: B
201 Which of the following statements about a designated port working in RIPv2 multicast modes
are true? (Multiple Choice)
Answer: ABC
202. When using VRP, Which of the following commands is used to configure the data link layer
encapsulation type of a serial interface as HDLC?
A. A.encapsulation hdlc.
B. Link-protocol hdlc. (Right Answers)
C. hdlc enable,
D. Link-protocol ppp.
Answer: B
204. In a network that supporting IPv6. Which OSPF feature is no longer supported ?
A. Multiple areas.
B. Router-ID.
C. Authentication. (Right Answers)
D. Multicast updates.
Answer: C
205. Which of the following problems may emerge when a loop exists on a router? (Multiple
Choice)
Answer: BC
206. PPP is more secure than HDLC because PPP supports authentication protocols such as 0.
(Multiple Choice)
Answer: AC
207. Two routers have established a point-to-point network using PPP. The administrator has
configured the routers tD run OSPF in the same area with the same router ID, what behavior will
occur as a result of the configuration?
A. The routers will build a neighbor relationship even though both routers are using the same router
ID.
B. VRP will notify of a router ID conflict between the two routers (Right Answers)
C. The routers will build an adjacency even though both routers are using the same router ID.
D. The routers will not send hello packets to each other because they are using the same router ID.
Answer: B
208. Which of the following entries is not included in the routing table?
Answer: ABC
In order to improve security, the two hosts use IPsec VPN to transmit data.
Which IPsec mode and protocol can be used to hide the host's IP address? (Multiple Choice)
A. AH.
B. Transport mode.
C. Tunnel mode. (Right Answers)
D. ESP. (Right Answers)
Answer: CD
211. Refer to the graphic, 00e0-fc99-9999 is a specific host MAC address learned by a switch
through ARP and the host changes the IP address three times. <Huawei>display arp dynamic
A. TRUE
B. FALSE (Right Answers )
Answer: F
212.0n Huawei devices, administrators can advertise a subnet in RIPv2 because RIPv2 supports
VLSM.
A. TRUE
B. FALSE (Right Answers )
Answer: B
213.The administrator cannot use telnet to manage the AR2200. The administrator is able to verify
connectivity to the router and has been informed that other administrators have no difficulties
using telnet. Which statements describe the possible reasons for this problem? (Multiple Choice)
214. Refer to the graphic. The routing table contains the routes of the RTB. Which advertised route
will not be found in the routing table of the neighboring router RTA?
10 0 2.0/24
Answer: AD
Answer: B
217. ARP can resolve the MAC address of a target device based on the destination IP address and
realize mappings between data link addresses and IP addresses.
Answer: A
Answer: A
219. Which SNMP version focuses on two main aspects, namely security and administration. The
security aspect is addressed by offering both strong authentication and data encryption for privacy.
The administration aspect is focused on two parts, namely notification originators and proxy
forwarders.
A. SNMPv1
B. SNMPv2
C. SNMPv2c
D. SNMPv3 (Right Answers)
220. Network storms may occur if there is a loop on a switched network.
Answer: A
221. An Ethernet port can work one of three duplex modes whereas an Optical Ethernet port only
supports one single mode which of the following represents this mode?
Answer: A
222. VLSM can expand any IP network segment, including Class D addresses.
A. TRUE
B. FALSE (Right Answers)
Answer: B
223. A DHCP Offer packet can carry only one DNS server address.
A. TRUE
B. FALSE (Right Answers)
Answer: B
224. Two routers are connected through serial interfaces and support PPP encapsulation. Which
parameters must be negotiated to establish the PPP connection? (Multiple Choice)
Answer: ACD
225. The following configuration commands implement route backup on RTA for a route to the
same destination 10.1.1.0.
A. TRUE
B. FALSE (Right Answers)
Answer: F
226. Which statements are true about VLAN communication? (Multiple Choice)
Answer: ABC
227. If PPP authentication fails, which ype of packet will be sent to the authenticated peer by the
authenticator?
A. Authenticate-Ack
B. Authenticate-Nak (Right Answers)
C. Authenticate-Reject
D. Authenticate-Reply
228. Which of the following storage devices is used to store the startup configuration files in a
router?
A. SDRAM.
B. NVRAM.
C. Flash. (Right Answers)
D. BootROM.
Answer: C
229 According tD the configuration of single-armed routing in the following figure, the
administrative department and finance department can communicate with each other even if proxy
ARP is disabled on the sub interface on R1,
A. TRUE
B. FALSE (Right Answers )
230. When a router is powered on, the router reads the configuration file saved in the default save
directory to get itself initialized. lithe configuration file does not exist in the default save directory,
what does the router use to initialize itself?
Answer: C
231. Which of the following statements are true about ACL deployment on Huawei devices?
(Multiple Choice)
Answer: BE
232. In PPP, you can use the "ppp chap authentication" command to enable CHAP authentication.
A. TRUE
B. FALSE (Right Answers)
Answer: F
233. After checking the OSPF neighbor state. the administrator discovers that the router has
established a TWO-WAY state with the peering router. What can be understood from this
information?
Answer: D
234. Refer to the output. When the administrator first starts the router, a system notice is
displayed, however after rebooting this router, the notice disappeared. What is the reason for this?
(Multiple Choice)
A. This notice only appears during the very first device startup.
B. The administrator has configured the device and saved the configuration. causing the notice
to disappear (Right Answers)
C. The administrator selected and did not save the configuration.
D. The administrator selected 'y' and saved the configuration. (Right Answers)
Answer: BD
235. A client failed to transfer a file to the FTP server, but found the IP connectivity was without
problem. The client assumed that the problem was with the port configuration. The blocking of
which ports would likely cause this problem? (Multiple Choice)
A. 21 (Right Answers)
B. 80
C. 20 (Right Answers)
236. Layer 2 switches are data link layer devices that identify MAC addresses of Layer 2 data
frames and forward Layer 2 data frames based on MAC addresses. In addition, they record
mappings between MAC addresses and interfaces in the MAC address table.
Answer: D
238. How many VLANs are created when using the commands "vian batch 10 2D" and "vian batch
10 to 20"?
A. 2 and 2.
B. 11 and 11.
C. 11 and 2.
D. 2 and 11. (Right Answers)
239. Refer to the graphic. RTA is a PPPoE client, and sends PADI packets to Server A. which type
message is used for sending PADI packets?
A. Unicast.
B. Multicast.
C. Broadcast. (Right Answers)
D. Any cast.
Answer: C
240. If AH and ESP are both required to protect data streams between IPsec peers. how many
Security Associations (SA) are required ?
A. 1
B. 2
C. 3
D. 4 (Right Answers)
Answer: D
The administrator wishes to configure the DHCP server pool in order to assign an IP address to the
customer's terminal device. Which command should be included in the configuration to provide the
minimal lease period for IP addresses?
Answer: B
242. Which of the following statements regarding Designated Routers in OSPF are correct?
(Multiple Choice)
A. DR is elected by all the routers in the same network segment (Right Answers)
B. If the priorities of two routers are different, the router with the lower priority will be elected as
DR.
C. If the priorities of two routers are equal, the router with the higher Router ID will be
elected as DR. (Right Answers)
D. DR and BDR must be establish adjacency relationship. (Right Answers)
Answer: ACD
243. An AR2200 router is required to be reconfigured from scratch. Which steps are needed to
achieve this? (Multiple Choice)
Answer: AC
244. A company applies for a class C IP address for subnetting. It has six branches and the largest
branch should have 26 hosts. What would be an appropriate subnet mask for the largest branch?
A. 255.255.255.0
B. 255.255.255.128
C. 255.255.255.192
D. 255.255.255.224 (Right Answers)
Answer: D
245. When a two-way neighbor relationship is set up between two OSPF-enabled routers, it means
the LSDB synchronization has been completed, but the SPF algorithm has not been performed yet.
A. TRUE
B. FALSE (Right Answers)
Answer: B
246. Refer to the graphic, GEO/0/1 and GEO/0/2 on the switch are configured as hybrid interfaces.
Which of the following statements are true? (Multiple Choice)
A. The administrative department and the finance department cannot communicate with each other
because the VLANs of the two departments are different.
B. The data frames sent by the administrative department carry tagged VLAN 20 on the switch.
C. On the switch, the data frames sent by the finance department carry tagged VLAN 20.
(Right Answers )
D. The switch can be a Layer 2 or Layer 3 switch because communications do not need to be
transmitted through a Layer 3 gateway. (Right Answers )
E. If GEO/0/1 and GEO/0/2 on the switch are changed to trunk ports, the administrative department
and finance department can communicate with each other.
247. An Ethernet frame is captured by wireshark and the value of Type/Length field is 0x0800.
Which of the following statements about the frame are correct? (Multiple Choice)
Answer: AC
248. A DHCP Unique Identifier (DUID) in DHCPv6 can be configured in VRP using which
formats? (Multiple Choice)
Answer: AB
249. Refer to the graphic. Which of the following statements describes the network shown?
(Multiple Choice)
Answer: BC
250. The IP addresses of clients in the network are deployed via a DHCP server. When a host
reboots, which message will the host first send to the DHCP server?
A. DHCP DISCOVER.
B. DHCP REQUEST. (Right Answers)
C. DHCP OFFER.
D. DHCP ACK.
Answer: B
251. Assume that the router has learnt the best route to the same destination by using RIP OSPF
and Static Route respectively By default the Huawei router will select the route learnt via ( ) as the
best route
A. RIP
B. OSPF (Right Answers)
C. RIPv2
D. Static route
Answer: B
Answer: A
253. Refer to the graphic. A web server in a private network is required to provide HTTP services
to public users. The network administrator is required to configure NAT on RTA. Which
configuration should be used?
A. [RTA-Seria11/0/1]nat server protocol tcp global 202.10.10.1 www inside 192.168.1.1 8080
(Right Answers)
B. [RTA-Seria10/0/11nat server protocol tcp global 192.168.1.1 www inside 202.10.10.1 8080
C. [RTA-Gigabitethernet0/0/ljnat server protocol tcp global 202.10.10.1 www inside 192.168.1.1
8080
D. [RTA- Gigabitethernet0/0/ljnat server protocol tcp global 192.168.1.1 www inside 202.10.10.1
8080
Answer: A
When interface GO/0/1.2 of RTA receives a frame from Host B, what will RTA do?
Answer: AD
256. A layer 2 LAN switch generates CAM table entries according to the ( ) of the received frame.
Answer: A
257. 0n Huawei VRP platform. Which of the following can be used to invoke the history command
saved by the command line interface? (Multiple Choice)
Answer: AC
Answer: A
259. A router functioning as a Proxy receives an ARP request packet, but finds that the destination
address in the packet is not intended for itself. In this case. what will the router do? (Multiple
Choice)
Answer: BC
260. Refer to the graphic. IPsec VPN uses ESP to encrypt which fields?
Answer: A
261. According to OSI reference model, which layer is responsible for end to end error checking
and flow control?
A. Physical layer.
B. Data link layer.
C. Network layer.
D. Transport layer. (Right Answers)
Answer: D
262. The principle of VLSM: Based on the classful IP addresses. you can borrow some host ID bits
as part of the network bits. When deploying on a router, VLSM needs the routing protocol
supports it.
Answer: T
263. Refer to the configuration output. Which following statements are correct? (Multiple Choice)
Answer: BD
264. Which of the following storage devices are supported by Huawei router? (Multiple Choice)
265. When configuring the PPP authentication method as PAP. which of the following operations
are necessary? (Multiple Choice)
A. Add the user name and password of the authenticator party to the local user list (Right
Answers)
B. Configure the encapsulation type of the interface connected to the peer as PPP (Right
Answers)
C. Configure PPP authentication method as CHAP.
D. On the authenticated end. configure the user name and password that are sent to
authenticator (Right Answers)
Answer: ABD
266. Which of the following standards provide a transmission rate of more than 1Gbps?
A. 802.11b.
B. 802.11g.
C. 802.11n.
D. 802 11ac (Right Answers)
Answer: D
A. You can use GVRP to detect and delete network devices dynamically.
B. GVRP must be enabled on switches; otherwise, switches cannot communicate with each other.
C. Based on the working mechanism of GARP. GVRP maintains dynamic VLAN registration
information in a device and propagates registration information to other devices. (Right
Answers)
D. GVRP is enabled by default and can be disabled manually.
Answer: C
268. A user can view the information for the RIP on a router. What does "Age time" in the
returned result of the command mean?
A. Telnet.
B. SSH.
C. Web.
D. Net stream. (Right Answers)
Answer: D
270. Which of the following statements regarding the router ID in OSPF are incorrect? (Multiple
Choice)
A. The router IDs of OSPF routers in the same area must be the same, but can be different in
different areas. (Right Answers)
B. The router ID must be the IP address of an OSPF router interface. (Right Answers)
C. The router ID must be configured manually. (Right Answers)
D. A router running OSPF must have a router ID for it to operate properly.
Answer: ABC
271. On an FR network, when the fr inarp command is executed, the interface where static address
mapping entries have been configured sends an Inverse ARP Request packet to the remote device
to replace the static address mapping entries.
A. TRUE
B. FALSE (Right Answers)
Answer: A
272. In the case of Huawei router, the Tracert command uses UDP to encapsulate probe packets.
A. TRUE (Right Answers)
B. FALSE
Answer: T
273. Refer to the graphic. Host A and Host B use VLAN routing to facilitate communication. What
must be configured on interface GO/0/1.1 to achieve this?
274. Refer to the display output The display stp brief command is used to check the summary STP
information of a switch With regards to the output. which of the following statements is incorrect?
Answer: D
275. A port on a switch is configured as a Trunk port. Assume that one host connects to this Trunk
port to access the network. Which of the following operations is mandatory?
Answer: D
276. Which of the following are routing protocols? (Multiple Choice)
A. IP.
B. OSPF. (Right Answers)
C. BGP. (Right Answers)
D. IPX.
Answer: BC
277. Which of the following descriptions regarding the TTL field of the IP packet is correct?
A. The TTL defines how many packets the source can send.
B. The TTL defines the duration during which the source can send packets.
C. The TTL value will decrement by 1 each time the packet is routed (Right Answers)
D. The TTL value will increment by 1 each time the packet is routed.
Answer: C
278. Refer to the graphic. Two peering routers are running RIP. RTA is using RIPv2 to advertise
its routes, while RTB is using RIPvI to advertise the route 1.11.1/32. The administrator configures
"RIP version 2 multicast" for interface GO/0/1 of RTB. How will the route 11.1.1/32 appear in the
the IP routing table of RTA?
279. In the PPPoE discovery stage, the PPPoE server assigns a session-id to the PPPoE client in
which packet?
A. PADI.
B. PADO.
C. PADR.
D. PADS. (Right Answers)
Answer: D
280. Refer to the graphic, which of the following statements is true about OSPF topology and
configuration?
Answer: C
281A network administrator uses the ping command to check for points of failure in the network.
Which protocols will be used during this process? (Multiple Choice)
Answer: AC
282. What is the default value of switch priority when STP is enabled on Huawei switch?
A. 4096
B. 8192
C. 16384
D. 32768 (Right Answers)
Answer: D
283. According to the following DHCP flowchart, which statements are true? (Multiple Choice)
284. Which of the following statements about static route preference on Huawei devices is false?
285. A network administrator uses the ping command to test connectivity to the destination 10 0 0 2
f.° on a Huawei AR series router Which statement regarding the output is correct?
A. The network administrator used the command ping -c 2 -s 800 10 0 0.2 (Right Answers)
B. The network administrator used the command ping -a 2 -v 800 10.0.0.2.
C. The path between the source and destination is not OK.
D. The network administrator changed the default TTL value.
Answer: A
286. When source end uses application software to send an image file through a network, the
TCP/IP encapsulation process of the file is: Data ->Segment -> Packet -> Frame -> Bit.
Answer: A
287. Which of following may be the reasons that cause Frame Relay PVC to work abnormally?
(Multiple Choice)
Answer: BCD
288. In the VRP system, what are the functions of Ctrl+Z? (Multiple Choice)
Return from the system view to the user view. (Right Answers)
Answer: E
289. When the tunneling mode is used to encapsulate an IPSec packet. the IP addresses of the
intranet hosts are hidden to ensure the security of the entire original data packet.
Answer: A
290. In STP, the priority of the STP root switches ranges from 0 to 65536.
A. TRUE
B. FALSE (Right Answers)
Answer: B
291. The Eth-Trunk frame forwarding mechanism used to prevent changes in the data sequence
forwards frames based on which of the following parameters? (Multiple Choice)
Answer: AB
292.0SPF allows for "multiple" processes. By default. OSPF selects a process whose number is ().
A. 0
B. 1 (Right Answers)
C. 10
D. 100
Answer: B
293. A network administrator has captured a data frame in the network with the destination MAC
address of 01-00-5E-A0-BI-C3. The correct statement about this MAC addresses s Q.
ARMIN C
(Huawet]display 0) routing-table
Rade flags: R - relay, D - download to fi
When this router receives a packet with a stination IP address of 9 11 1. the router forwards the packet based on the route 9.1.0.0/16 because the matched bit number in this rdrte is the largest.
OA. TRUE (Right Answers)
Oa FALSE
Answer: T
.ffitiewel> system-view
[Huswei] user-interface console 0
(Huawei-ui-console01 user privilege leve115
[Huawei-ukconsole01 authentication-mode password
[Huawel-W-console01 set authentication password cipher heewel2012
[Huswekui-console0] quit
The administrator configured the device using the commands in the configuration output.
Regarding these commands, which statement is false?
❑ A. The administrator wishes to enable management through the console interface.
❑ B. Following configuration, the administrator cannot manage the device remotely
❑ C. A user that logs-in through the console interface is assigned the highest pMilege level.
❑ CI The password of a user logged in through console 'cipher home:2012' (Right Answers)
Answer:
5.Users in the network discovered that the efficiency of a file transfer is low. The administrator used wire shark to observe the network and discovered many duplicate frames.
Which statement correctly explains the reason for this?
C A. The switch doesn't know the destination and has flooded frames
❑ B. This network needs upgrading to use newer and more efficient switches.
❑ C The network has loops at the Ink layer Sight Answers)
❑ D. The network has not been segmented using VLANs.
Answer: C
6 Refer to the graphic three Layer 2 watches sr-aided teeth STP are connected to the same huh.
ISAVI 317.90eter.12-3156
taws OW)
32766.60ec-623456/ 32765 Odeces3e5678
The configuration of budge Bs d as Wows write all other configurations use default veer,
Which alike following statements is false?
❑ A. LSW1 is selected as the root bridge by companng the bridge Ds
❑ B. Gar01.2on LSW1 is docked
C. GOMM on LAM is for AP Port and is blocked
▪ The two interfaces on LSW1 an designated ports and are in the foraarreng slate (Right Answers)
7.0n VRP platform. which of the following parameters can be used together with the "ping' command to specify the source address of an echo request message?
❑ A -a Right Answers)
❑ B. -s
❑ C. -d
❑ D. -n
Answer: A
Answer: C
9 The nets.* administrator creates VLAN 10 and assigns an IP address to VLAMF10 WIen usng the command 'display op interlace brief. the admintstralor finds that VLANIF10 Is down
Whet should be done to enable VLANIF107
.
❑ A Use the command "endo shutdown' undsr the interlace Now for VLANIFI 0
❑ B. Assrsr o physical interface Owl hes either . ectres of ..PC ,"? phyBoat Bole to VLAN
❑ C Assign only a physlc al interface that has an acir. physical slate to VLAN 10 Night Answers)
El 0 Add an interface bid has an ache physical Bata and a bunk port associated with VLAN 10
Answer: C
10 Mali piths be...a regardng Frame Relay ow are conch (Matteis Cho.)
❑ A MCI is I.alty significant {Right Answers)
❑ DWI is allocated by DIE
❑ C The range of DLCI INA canoe usett is Nom 161007 {Rig. Answers)
❑ D. The same DLCI can be configued od diferent physical interrac.. (Right Answers)
Mswrr ACO
Answer: B
12.1Nhich of the following authentication methods are supported for Telnet users? (Multiple Choice(
❑ A Password authentication (Right Answers)
❑ B AAA local authentication (Right Answers)
❑ C. MD5 authentication.
❑ D No authentication. (Right Answers)
Answer: ABD
13.0n an FR network, the DLCI identifies a virtual circuit on an interface. The DLCI must be unique during planning and deployment.
OA. TRUE
O0 FALSE (Right Answers)
Answer: F
14.A company applies fora class C IP address for subnetting. it has eight branches. The largest branch has a subset and should support at least 14 hosts.
What would be an appropriate subset mask?
❑ A. 255.255.255.0
❑ B. 255.255.255.128
❑ C. 255.255.255.192
❑ D 255 255 255 224 (Right Answers)
Answer: D
15.Two routers are configured with OSPFv3. OSPFv3 is enabled on ail interfaces of each router.
PTA eon
451G0/0/1 00/0/1
2230 fella 53313/66 reso feos 62cs/ade
Which of the following is true in the event that the network administrator does not configure a Router-ID?
❑ A The IP address of the loopback 0 interface will be used as the router ID.
❑ B The IP address of the loopback 1 interface will be used as the router ID.
❑ C The IP address of interface GO/0/0 will be used as the router ID.
❑ D. No router ID will be assigned to the router (Right Answers)
Answer: D
ROOT
Four switches are operating using STP. One of the port interfaces on ROOT has failed.
How long will it take for the 'blocked' interface to change to a state of forwarding?
E A. 30 seconds
E B. 50 seconds (Right Answers )
0 C. 15 seconds_
E D. 3 seconds_
Answer: B
Answer: A
18.Which of the following statements are true about the working modes of Ethernet interfaces? (Multiple Choice)
❑ A. A GE Ethernet interface can only work in full-duplex mode.
0 B. A 10 GE Ethernet interface can only work in full-duplex mode.
a C. Interconnected EtheMet interfaces Can Work normally when the working modes Of the two interfaces are different.
a D. The working mode of Ethernet interfaces Can be configured manually. (Right Answers)
❑ E. A 10DM Ethernet interface can work in either full-duplex mode or half-duplex mode (Right Answers)
19.Which of the following WLAN standards support operation in the 5GHz range? (Multiple Choice)
❑ A 80211a.(Right Answers)
0 B. 802.11b
0 C. 802.11g.
❑ D. 802.11n (Right Answers)
Answer: AD
Answer: B
21.In the VRP system. the login timeout interval must be configured on the VTY interface.
OA. TRUE
0 El FALSE (Right Answers)
22.Which of the following statements are true about PPP? (Multiple Choice)
❑ A PPP supports both synchronous and asynchronous links at the physical layer (Right Answers)
0 B. The scalability of PPP is low, so PPP cannot be deployed on Ethernet links.
❑ C PPP supports both plain text and cipher text authentications (Right Answers)
❑ D. PPP supports various network layer protocols, such as IPCP and IPXCP (Right Answers)
❑ E. In PPP, multiple physical links can be bound to one logical link to increase bandwidth (Right Answers)
Answer: ACDE
A host has established a telnet connection with the router attached to interface GO/0/0.
Which of the following statements are correct? (Multiple Choice)
❑ A The destination MAC address of a frame sent by the host will be the MAC address of the router interface GO/010 (Right Answers )
❑ B. The destination MAC address of a frame sent by the host will be the MAC address of the switch_
❑ C. The destination port number in a segment header will have a value of 80.
❑ a The destination IP address of a packet sent by the host will be the IP address of the Router interface GO/0/0. (Right Answers)
Answer) AD
Answer: 0
25.Which of the following statements about gratuitous ARP packets are true? (Multiple Choice)
❑ A A system can determine whether confiding IP addresses are used by sending a gratuitous ARP packet (Right Answers)
❑ B A gratuitous ARP packet uses the same format as an ARP request packet. (Right Answers)
❑ C. A gratuitous ARP packet can help to update an IP address
❑ D. A gratuitous ARP packet uses the same format as an ARP reply packet.
Answer: AB
26.The administrator wishes to configure OSPF on a router in the network, however the router has no loopback interface.
Which value wit be used as the router ID?
❑ A The lowest IP address of the routers active interfaces
❑ B The highest IP address of the routers active interfaces. (Right Answers)
❑ C. The IP address of the management interface.
❑ Cl. The priority value of the router.
Answer: B
27.0n Huawei switches, VLAN 4095 cannot be created and VLAN 1 cannot be deleted.
0 A TRUE (Right Answers)
0g. FALSE
Answer: T
<Ctuldway.isplev mac-adore):
Answer: C
29.Link aggregation is a common technique in enterprise network.
Which of the following description is the advantages of link aggregation? (Multiple Choice)
❑ A Improves link bandwidth (Right Answers)
❑ B Implements load sharing (Right Answers)
❑ C. Improves network reliability (Right Answers)
❑ D. Facilitates data copy for analysis.
Answer: ABC
30.Which of the following statements about the PPP link establishment process we false? (Multiple Choice)
❑ A. In Dead phase. the physical layer is unavailable. When both communication devices detect that the physical line is activated. the Link Dead phase transitions to the Establish phase, that is. the PPP link establishment phase.
❑ B. In Establish phase. the two devices perform LCP negotiation to negotiate the MRU. authentication mode, and magic number.
❑ C. In Network phase, the two devices perform NCP negotiation to select and configure a network layer protocol and to negotiate network layer parameters.
❑ D After NCP negotiation succeeds. packets can be sent over the PPP link and the devices enter Terminate phase. (Right Answers)
❑ E PPP links support both half- and full-duplex modes. (Right Answers)
Answer: DE
Answer: AC
Answer: ABD
Rm
GO/0/1
Ric
1118
Which NilteMent 6 correctly explains the forwarding behanor between RTA and RTE? (Multiple Choice)
❑ A When the network uses OSPF_ data will be forwarded along the path wa Sli0,0
❑ B When the network uses RIN2 data 0111 be forwarded along the path ma St/O/0 (Right Answers/
C WIlon the network ores OSR. Para will be forwarded dlemg the pall; him- via 001011(Right Answers)
D When the network uses RIFV2_ data will be forwarded along the weer via S2/L/0
Answer, BC
Answer: B
35.0n the VRP, what is the function of the "interface ylanif Man-id> command?
❑ A. It is used to create a VLANIF interface.
It R used to create a VLANIF interface and enter the VLANIF interface view, (Right Answers)
❑ C. lt is used to configure a VLAN fora VLANIF interface
❑ D. There is no such command.
Answer: B
36.VVhich of the following technologies is used to bind MAC addresses to interfaces on a switch?
❑ A. SEP.
❑ B Pod security (Right Answers)
❑ C. ACL.
❑ 0. NAT.
Answer: B
37.Which of the following commands can be used to display mapping relationship between network address and DLCI?
❑ A, &play fr interface
❑ 13 display fr
❑ C. display h map-info (Right Answers)
❑ D. display fr brief
Answer: C
38.Which of the following steps are necessary to configure OSPF on a Huawei router? (Multiple Choice)
❑ A. Configuration of a router ID.
❑ B Enabling of an OSPF process (Right Answers)
❑ C Specifying an OSPF area {Right Answers)
❑ D. Configuration of the network segments within each area. (Right Answers )
Answer: BCD
Answer: C
40.In Layer 2 mode, the transmission rate of an Eth-Trunk interface is determined by which of the following? (Multiple Choice)
❑ A Maximum number of Up member links (Right Answers)
❑ B. Minimum number of Up member links.
❑ C Number of Up member interfaces (Right Answers)
❑ D. Number of interfaces.
Answer: AC
41Which of the following network types does OSPF support? (Multiple Choice)
❑ A Point-toPoint Plight Answers)
❑ B Broadcast. (Right Answers)
❑ C. Non-Broadcast Muhl-Access (Right Answers)
❑ D. Point-to.Multipomt (Right Answers)
Answer: ABCD
421 a networks broadcast address is 172.16.1.255, which of the following addresses can be the network address?
❑ A. 172.16.2.0
❑ B. 172.16.1.253
❑ C. 172.16.1.128 (Right Answers)
❑ O. 172.16.1.1
ADM., C
Which of the following statements regarding the configuration output are correct? (Multiple Choice)
❑ A. The PVC, on interface GigabilEthemet0/0/1 is 10 (Right Answers)
❑ B. The PVID on interface Gigabitahemet0/0/1 is 1
❑ C. The PVID on interface GigabitEthemet0/0/2 is 10
❑ 0. The PVID on interface GigabitEthemet0/0/2 is 1 (Right Answers)
Answer: AD
MAccording to the following configuration resukswhich statement is true about RIP?
45_ What is the maximum number of member interfaces supported by a single Eth-Trunk9
I:1 A 6
0 B.8 'Right Answers)
❑ C.10
❑ D. 12
Answer B
FM
Which of the following statements cortectly describe the Frame Relay devices? (Multiple Choice)
❑ A RTA is a GTE device. (Right Answers)
❑ EL FRA is a DTE device-
0 C. FRB is a DCE device. (Right Answers)
❑ D. The interface S1/0/1 on RTA is a DCE interface.
Answer: AC
In the private network, RTA dynamically assigns a public address from the address pool to hosts without port translation. Host C wishes to access the public network while pool addresses are assigned to Host A and Host B.
What will occur as a result?
❑ A The first public address will be allocated to Host C. and Host A will be forced offline.
❑ B. The last public address will be allocated to Host C, and Host B will be forced offline
❑ C. Host C will be unable to forward traffic over the public network. (Right Answers)
❑ D. All hosts will have access to the public network through pool address swapping.
Answer: C
Answer: BC
49.In the PPP protocol, which of the following algorithms is used by CHAP?
❑ A. DES.
❑ B. MD5. Might Answers)
❑ C. AEs.
❑ D. None.
Answer: B
50 The IPv6 address achilecture does not mclude which of tine following address types?
❑ A Decast
❑ B Mullitast
❑ C Broadcast I Rig ht Answers)
❑ D AnycaSt
Answer: C
Answer: F
Answer: D
53 On 1-1.110 detects. you can use the undo summary command to peonitd automate route summanzatton or RIFe)
OA TRUE (Right Answers/
B FALSE
Answer: T
5d The authentication, authorization and accounting schemes and HWTACACS or RADIUS server templates created on AR routers take effect only after being applied to a domain.
OA "TRUE (Right Answers)
OB. FALSE
Answer: T
551 AAA authentication is used on Huawei devices and the remote server does not respond, the authentication can be performed on network devices.
OA. TRUE (Right Answers)
013 FALSE
Answer: T
56.UDP is connectionless oriented, which of the following must be used in order to ensure reliability?
❑ A. Internet Protocol.
❑ B Application Layer Protocol Right Answers)
❑ C. Network Layer Protocol
❑ D. Transmission Control Protocol.
Answer: B
57.Which of the following items are included in static routes? (Multiple Choice)
❑ A Destination network segment (Right Answers)
❑ B her/-hop IP address (Right Answers)
❑ C Outbound interface (Right Answers)
❑ D. MAC address of the outbound interface D. Route preference.
Answer: ABCE
58 Refer to the graphic.
al RZ
41,GEO/0/0 ef0/0/0 420
plirip 1 [0111101
1111-0,1]version 2 tit2rip-11netwo.10.0.0.0
[R1-rip-Ilnetwork 100.0.0 01.2-rip-Ilnetwork 200.0
0226,1)network 1.0.0.0
When RIP is used between R1 and R2. R1 cannot learn the routes on
2.0.0_0/6.
OA_ TRUE (Right Answers)
0 B. FALSE
Answer: T
Answer: A
60.0n the command line interface of Huawei AR routers. the role of the Save command is to Save the current system time.
OA TRUE
OB FALSE (Right Answers)
Answer: F
61.During STP calculation, the port cost is associated with port bandwidth.
Which of the following statements about the relation between port cost and pod bandwidth is true?
❑ A. Pod cost decreases when port bandwidth increases (Right Answers)
❑ B. Port cost increases when port bandwidth increases.
❑ C. Port cost is consistent with pod bandwidth.
❑ D. Port cost varies randomly according to port bandwidth.
Answer: A
62.A network requires a solution to allow 50 private IP addresses to be translated, however only a single public address is available for use.
Which conversion method can be used to support this requirement?
❑ A. Static NAT.
❑ B. Dynamic NAT.
❑ C Easy-IP (Right Answers)
❑ D. NAP(.
Answer: C
63.There are two routers (RTA and RTB) between the source device and destination device. The Traced command is used to detect the path between the two devices. During detection of the first hop (RTA), the source device sends a UDP
packet with a TIL of 1 to an interface with a large interface number on the destination device. The TTL turns to 0 when the packet arrives at RTB. upon which RTA sends an ICMP_ message to the source device.
❑ A Time Exceeded. (Right Answers)
❑ B. Echo Request.
❑ C. Echo Reply.
❑ D. Port Unreachable.
Answer: A
Answer: A
65.In a broadcast address, all host bits are set to 1 and a broadcast address can be used as a host address.
OA. TRUE
0 B FALSE (Right Answers)
Answer: F
66.Which of the following formats represent an accurate abbreviation of the IPv6 address 2031,0000:720C:0000:0000: 119E0:839A, 130B? (Multiple Choice)
❑ A 2031 0,720C.0.11.9E0.839A.130B (Right Answers)
❑ B. 2031:0,720C,0,0,9E,839A,130B
❑ C. 2031,:720C-.:9E0:839A:130B
❑ D. 2031:0:720C..9E0,839A:130B [Right Answers)
Answer: AD
67 Which of the following commands can switch a view from the system view to the user new,
❑ A Systern-new.
❑ B. Router.
❑ C Dud (Right Answers)
❑ D. User-view.
Answer: C
Answer: T
69. Which of the following statements are true about ICMP messages? (Multiple Choice)
❑ A ICMP messages can record time, including the original time, packet receinng haw and packet sending time (Right Answers)
❑ B. ICMP messages are encapsulated in IP packets but not at the transport layer. (Right Answers)
❑ C. ICMP messages include error messages, control messages, request/response messages, and update messages.
❑ D. ICMP does not support redirection.
❑ E. ICMP messages cannot be used to detect a path's MTU.
Answer: AB
70.To provide the information about the IP addresses that a user packet traverses along the path to the destination. which of the following does Tracert record in each expired ICMPTTL packet?
❑ A. Destination port.
❑ B Source pod.
❑ C. Destination IP address.
❑ D Source IP address. (Right Answers)
Answer: D
71.eSight supports which of the following SNMP versions in order to manage devices? (Multiple Choice)
❑ A SNMPvl. (Right Answers)
❑ B. SNMF2.
❑ C. SNMP2c. (Right Answers)
SNMPv3. (Right Answers)
Answer: ACD
72.When an access port receives a data frame in which the VLAN ID he same as the PVID. the access port strips the VLAN ID from the borne and forwards the frame directly.
OA TRUE
0 El FALSE (Right Answers )
Answer: F
Answer: B
74.VVhich of the following configurations regarding static route are correct? (Multiple Choice)
❑ A ip route-static 129.1.0.0 16 eerie/ 0 (Right Answers)
❑ B. ip route-static 10.0.0.2 16 129.1.0.0
❑ C. ip route-static 129.1.0.0 16 10.0.0.2 (Right Answers /
❑ D. ip route-static 129.1.0.0.255.255.0.0 10.0.0.2 (Right Answers)
Answer: ACD
76 According to the defauh value of rode preference on the VRP platform, whch ulna, following represent the correct sequenc e for deed mute. static rode. RIP and DSPF effigy are hated from ligh preference to IOW preference,
U A Direct. Static. RIP. OSPF
flB Duerr OSPF Starr PIP (Right Answers)
0 C. Direct. OSPF. RIP. Sight
❑ D Direct, MP Static. OSPF
Answer: B
76.Which of the following statements about the information contained in a Database Description packet are true? (Multiple Choice)
❑ A. A Database Description packet contains all information about each LSA.
• A Database Description packet contains only the header of an LSA (Right Answers)
❑ C The header of an LSA contains the unique identifier of the LSA. (Right Answers)
❑ D. The header of an LSA is only a small portion of the LSA. (Right Answers)
Answer: BCD
The network administrator needs to configure static NAT on RTA, in order to allow Host A to communicate wfh Host C.
Which command is coned?
❑ A. [RTA-Seda11/0/1]nal outbound 200.1.1_10
❑ B. [RTA-Seda11/0/1]nal static global 200_11.10 inside 192.168_1_0
E C. [RTA-Seriall/OPI]nat static global 192.1681.1 inside 200.1.1.10
E D [RTA-Seria11/0/1]nal static global 2001.1.10 inside 192.168_1_1 (Right Answers)
Answer: D
78.In the case of Huawei router, what is the "4" parameter in a Ping command issued on a VRP operating system used to set?
❑ A Interface for sending an Echo Request packet. Right Answers)
❑ B. Source IP address for sending an Echo Request packet.
El C. Interface for receiving an Echo Reply packet.
❑ D Destination IP address for receiting an Echo Reply packet.
Answer: A
79.Which of the following statements is true about the TTL field in an IP packet header?
❑ A. The length of this field is 7 bits.
❑ B. This field is used to fragment packets.
❑ C This field is used to prevent packets from looping (Right Answers)
El D. This field is used to display packet priorities.
Answer: C
80 Two routers establish an IPsec tunnel, which of the following does not need to be the same on both peering devices?
❑ A. Encapsulation mode.
0 B. Transform mode.
❑ C Proposal name (Right Answers)
• Authentication algorithm.
Answer: C
81. Which of the following VRP commands can be used to enter area O yiew?(Multiple Choice)
0 A. (Huaweilospf area 0
'0 B. [Huawa-ospf-Ilarea 0 (Right Answers)
0 C. Nuawei-ospf-Ilarea 0 0 0.0 (Right Answers)
0 D. g-luawei-ospf-garea 0 enable
Answer: BC
82.In SIP, which of the following items may affect the selection of the root switch? (Multiple Choice)
El A. Switch priority. (Right Answers)
0 B. Switch port ID.
0 C. Switch interface bandwidth.
O D. Switch MAC address (Right Answers)
O E. Switch IP address.
Answer: AD
EG.The network administrator has decided to configure link aggregation in the enterprise network.
Which of the following represent advantages of link aggregation? (Multiple Choice)
❑ A. Load balancing (Right Answers)
❑ B Improved bandwidth (Right Answers)
❑ C. Enhanced reliability (Right Answers)
❑ D. Improved security.
Answer: ABC
SWA SIVIS
Hybrid Trunk
co/o/1 GO/0/
Host Host 8
V.P12 WANE
Interface GO/0/1 on SWA is a hybrid port in tagged mode with a PVID of 1 for which VLAN 2 is permitted.Interface GO/0/1 on SWB is a trunk port. with a PVID of 1 for which VLAN Per ed.
Which of the following statements is correct?
❑ A. Host A can send, but canna receNe frames from Host B.
❑ B. Host A cannot send, but can receive frames from Host B.
❑ C. Host A cannot communicate with Host B.
❑ D. Host A can communicate with Host ft (Right Answers)
Answer: LI
Answer: A
Switch
00/0/2 00/0/1
G0/0/1 G0/0/2
Both switches are operating using SIP With exception to those shown, all other default parameters have been maintained.
Which port will be blocked?
❑ A. Port GO/0/1 of switch A
❑ B. Pod G0/0/2 of switch B.
❑ C Port GO/0/1 of switch B. (Right Answers)
❑ D. Port GO/0/2 of switch A.
Answer: C
87.An administrator disco ered he/she was unable to use TFTP to transfer files to the muter.
Which of the following describes the likely reason for this?
❑ A. The TFTP service had been disabled on the router.
❑ B. TCP port 69 of the server had been blocked.
❑ C UDP port 69 of the sewer had been blocked (Right Answers)
❑ D. The usemame and password had been modified.
Answer: C
<Huswer>system-view
[Huswei]history-command max-size 20
Answer: AC
691 the network mask is 255.255.240.0, which of the following are valid network address? (Multiple Choice)
❑ A. 150.150.0.0 (Right Answers)
❑ B. 150.150.0.8
❑ C. 150.150.8.0
❑ a 150.150.16.0 (Right Answers)
Answer: AD
90.Which of the following methods are supported by VRP to configure the router? (Multiple Choice)
❑ A Through the Console port (Right Answers)
❑ B Through Telnet (Right Answers)
❑ C Through the AUX port (Right Answers)
❑ D. Through FTP.
Answer: ABC
MA itTS
fail so/ so/o/)
An administrator has configured OSPF on the two routers, following which he then implements the command silent-interface s0/0/1 on RTA
What effect will this command have on the network? (Multiple Choice)
❑ A. The link information advertised by RTB will be maintained in the Link State Database of RTA
❑ B. The OSPF neighbor relationship will fail between two routers. (Right Answers)
❑ C. The configuration will not affect the OSPF neighbor relationship between the two routers_
❑ D. The link information advertised by RTB will no longer be maintained in the Link State Database of RTA. (Right Answers)
Answer: BD
92.0n VRP, the command lines are classified into four levels in increasing priority: Visit level. Monitoring level, Configuration level. and Management level.
At which level, the operator is permitted to configure service but is not permitted to operate the file system?
❑ A. Visit level.
❑ B. Monitoring level.
❑ C Configuration level (Right Answers)
❑ D Management level.
Answer: C
93.What action does an access port take in the process of sending VLAN frames?
❑ A The access port sends tagged frames.
❑ B The access port strips the VLAN tag and forwards the frame (Right Answers)
❑ C. The access port exchanges the VLAN tag of the inbound and outbound port of the frame before forwarding the frame.
❑ D. The access port attaches its PVID information to the frame.
Answer: B
94.By default, the RIP-enabled interfaces on a Huawei router can receive broadcast and multicast packets of RIPv2. as well as broadcast packets of RIPv1.
O A. TRUE (Right Answers)
OB. FALSE
Answer: T
96.1Nhich of the following statements about a designated pod working in RIPv2 multicast mode are true? (Multiple Choice)
❑ A. The port receives only RIFV2 multicast packets (Right Answers)
❑ B The port does not receive RIPv1 broadcast packets (Right Answers)
❑ C The port does not receive RIFV2 broadcast packets (Right Answers)
❑ D. The port receives only RIPv1 multicast packets.
Answer: ABC
96.What of the following statements is correct regarding Access Control List types and ranges?
❑ A. A basic ACL value ranges from 1000-2999.
❑ B. An advanced ACL value ranges from 3000-4000.
❑ C A layer 2 ACL value ranges from 4000-4999. (Right Answers)
❑ D. An interface ACL value ranges 1000-2000.
Answer: C
97 According to the topology and configuration shown in the figure, an Eth-Trunk link can be set up between the two switches on which LSW2 is the Actor.
WW1 15W2
GE0/0/1 GE0/0/1
GE0/0/1 GE0/0/1
OA. TRUE
0 B. FALSE (Right Answers)
Answer: F
98.VVhich of the following is correct regarding the configuration of the troth port and access port on a switch?
❑ A Access ports can only send untegged frames (Right Answers)
0 B. Access ports can only send tagged frames.
E C. Trunk ports can only send untagged frames.
10 D. Trunk ports can only send tagged frames.
Answer: A
99.A router has !named two routes for the same network with the same prefix. One route has been learned via OSPF with a metric 014882, while the other route has been leamed via RIPv2 with a metric of 4 Which route(s) will be found in the
routing table?
❑ A. The RIFV2 route.
E B. The OSPF and RIFV2 routes.
❑ C. The OSPF mute (Right Answers)
❑ D. Neither of these routes will be found in the routing table.
Answer: C
1001 a network's address is 10.1.1.0/30. which of the following addresses is the broadcast address?
0 A. 10.1.1.1
❑ B. 10.1.1.2
10 C. 10.1.1.3 (Right Answers)
0 D. 10.1.1.4
Answer: C
101.According to the preceding VTY configuration, the user level is set to level 3. which is the highest level.
[Huaweljuser-interface vty 0 14
[Huawei-ul-vty0-14.1acl 2000 Inbound
[Huawei-ui-vty0-14Iuser privilege level 3
[Huawei-ui-vty0-14jauthentication-mode password
Please configure the login password (maximum length 16):huawei
OA. TRUE
013 FALSE (Right Answers)
Answer: F
PAM PAM
RTA is a PPPoE client, and following transmission of PADI, Server A responds with PADO packets to RTA.
Which distribution method is used for sending PADO packets?
0 A. Unicast. (Right Answers)
0 EL Multicast
0 C. Broadcast.
10 a Anycast.
Answer: A
103.Which of the following technologies can allow a hos h IP address 10.0.0.1 to access the intemet?
a A. Static route.
0 B Dynamic route.
a C. Route import.
a D. NAT (Right Answers)
Answer: D
Answer: C
105.VVhen both ends running PPP protocol detect that the physical link is active. the link state will transit horn dead to establish.
Which of the following protocols is used to negotiate the link parameters during this phase?
0 A. IP.
a B. DHCP.
❑ C LCP (Right Answers)
❑ D. NCP,
Answer: C
106 Two routers are connected via serial interfaces and the link-protocol is PPP, but the MRU of two serial interfacei—s are different, in PPP LCP negotiated stage, what will happen?
❑ A. LCP negotiation will fail.
❑ B. Negotiation will use the smaller value of MRU (Right Answers)
a C. Negotiation will use the larger value of MRU.
a D. Negotiation will use the default value that is 1500 octets.
Answer: B
107.Which of the following IPv6 addresses can be configured on a routers interface? (Multiple Choice)
❑ A fe60 - 13dc- - 1/64 (Right Answers)
a B. ff00.8a3c..91N64
1:1 C. :1/128
❑ D. 2001:12e3.1b02:: 211E4 (Right Answers)
Answer: AD
108.In standard SW mode, which of the following ports on non-root tches forward the BPDUs with TC bits set generated by the root switch?
a A. Root port,
❑ B. Backup port.
❑ C Designated port (Right Answers)
a D. Alternate port.
Answer: CH12-211-3
mastA Host
RA
GO/0/1
e
172160
0.2/16
G.2/06 172. 16. 12/16 41111
4;ir
The administrator has configured an IP address for Host A and Host B, but had forgotten to configure a default gateway.
What effect will this have on the hosts?
❑ A. Neither host will be affected, and therefore will be able to communicate with the peer.
❑ B. Host A will be unable to connect to the router interface G0/0/0.
❑ C Hose will be unable to communicate unless arp-proxy is enabled on the router (Right Answers)
a D. The host will be unable to reach neither the local nor remote network destinations.
Answer: C
110.In RSTP mode. interfaces in the Discarding state discard received data frames but maintain the MAC address table based on received data frames.
OA, TRUE
0 El FALSE (Right Answers)
Answer: F
111. Which of the following statements are incorrect? (Multiple Choice)
❑ A. The preferences for each static routes entry can be different.
❑ B. By default, OSPF maintains preference over RIP.
❑ C. The greater the cost. the better the route Is (Right Answers)
❑ D. For those routes to the same destination on VRP platform, the route with a higher preference value is more preferred over the route with a lower preference value. (Right Answers)
Answer: CD
(RTA]acl 2001
(RTA-acl-basic-2001(rule 20 permit source 20.1.1.00.0.0.255
(RTA-ad-basic-200101de 10 deny source 20.1.1.0 0.0.0.255
Which of the following statements is correct regarding the configuration of the ACL on RTA?
❑ A_ Packets from network 20 1.1.0/20 network will be denied (Right Answers)
❑ B. Packets from network 20_1.10/24 network will be permitted.
❑ C. Packets destined for network 2011_0/24 will be denied.
❑ D. Packets destined for network 201_1_0/24 will be permitted_
Answer: A
1131n order to check if the interface serial 1/0/0 of the router is working in either DCE or DTE mode, command 0 is used.
❑ A. &splay mode serial 1/0/0_
❑ B. display controller,
❑ C. display interface serial 1/0/0. (Right Answers)
❑ D. display current-configuration.
Answer: C
114 Trunk interfaces can send both tagged and untagged frames.
OA TRUE (Right Answers)
OB. FALSE
Answer: T
115.An end system is unable to communicate with a DHCP sewer following the startup process.
Which IP address may be used by the client?
❑ A. 0.0.0.0
❑ B. 127.0.0.1
❑ C. 169.254.2.33 (Right Answers)
❑ D. 255.255.255.255
Answer: C
116.Which of the following commands is used to enable dynamic address mappi otocol in the interface encapsulated with Frame Relay?
❑ A fr inarp (Right Answers)
❑ B. fr reverse-arp.
❑ C inverse-are.
❑ D. reVenSe-arp.
Answer: A
(Hu aweikip 1
[Huawei-rip-l]version 2
Answer: D
118,Refer to the configuration output
[RTA]aaa
[RTA-aaa]clomain huawei
[RTA-aaa-domain-huaweijauthentication-scheme aul
[RTA-aaa-domain-huaweijauthentication-scheme au2
RTA has been configured using AAA as shown. and associated with the "huawei' domain.
For users in the Huawei domain, which authentication-scheme will be used?
❑ A. eel
❑ B. au2 (Right Answers)
❑ C. eel will be used. When aul is deleted, users will use au2.
❑ D. au2 will be used. When au2 is deleted, users will use eel.
Answer: B
119.1n an RIP process on a Huawei device, which of the following configurations are coned for advertising network 10.1.1.1/39? (Multiple Choice)
❑ A. network 10.1.1.0
❑ B undo summary network 10.1.1.0
❑ C version 2 undo summary network 10.0 0 0 (Right Answers)
❑ D. undo summary network 10.1.0.0
❑ E. network 10.0.0.0 (Right Answers)
Answer: CE
120.NAFT differentiates IP addresses of different users based on protocol ID in TCP, UDP, or IP packets.
OA. TRUE
0 El FALSE (Right Answers)
Answer: F
121.Which of the following statements regarding single area OSPF are correct? (Multiple Choice)
❑ A. An IP address needs to be configured on a loopback interface of each router before configuring an OSPF area.
❑ B The value of an area can be from 044.0 to 255.255.266.255 (Right Answers)
❑ C. A single area can be configured using any supported area number (Right Answers)
❑ 0. All of the links of the network need to be advertised in Area 0.
Answer: BC
Answer: A
123.0 a router does not snatch a specific route when forwarding a packet and there is no default route, the router discards the packet directly.
O A. TRUE (Right Answers)
OB. FALSE
Answer: T
124.In Huawei Devices, when HAFT uses a dynamic address pool, addresses in the pool can be used repeatedry. That is. one IP address can be mapped to multiple intranet P addresses.
OA TRUE (Right Answers)
OB. FALSE
Answer: T
E0/0/1 EIVOA
The network administrator wishes to aggregate the two links as member interfaces of Eth-trunk 1.
Which statement is correct?
❑ A. The interfaces will be aggregated with load balancing.
❑ B. The interfaces will be aggregated, but only interface GEO/0/1 will send data flow.
❑ C. The interfaces will be aggregated. but the Eth-trunk will not be active.
❑ D. The interfaces cannot be aggregated. (Right Answers)
Answer:
126.VVhen an administrator first initializes the router, a warning is displayed.
<Huawei>
Warning: Auto-Config is working. Before configuring the device, stop Auto-
Config. If you perform configurations when Auto-Config is running, the DHCP,
routing, DNS, and VTY configurations will be lost. Do you want to stop Auto-
Coring? [y/n1:
Answer: C
127 Which of the following statements regarding static routing and dynamic routing is incorrect?
❑ A. The static routing can be easily configured and managed on the enterprise network.
❑ B. The use of dynamic muting is more convenient for the administrator to manage the network following network convergence.
❑ C The static routing can automatically recover when a link failure Is encountered (Right Answers)
❑ D. Dynastic routing will use more resources than static routes.
Answer: C
128.Which of the following parameter settings for terminal emulation are correct when configuring a Huawei muter through the Console pod?
❑ A. 4800bps. 8 data bits, 1 stop bits, odd parity check, and no flow control.
❑ B 9600bps, 8 data bits. 1 stop bits no panty check and no flow control (Right Answers)
• 9600bps. 8 data bits, 1 stop bits, even parity check, and hardware flow control.
❑ D. 19200bps, 8 data bits. 1 stop bits, no parity check, and no flow control.
Answer: B
129.Which of the following route entries can be aggregated into 10.0.0.24/29? (Multiple Choice)
❑ A. 10.0.0.25/30 (Right Answers)
❑ B. 10.0.0.23/30
❑ C 10.0.0.26/30 (Right Answers)
❑ D. 10.0.0.22/30
Answer: AC
130 Interface GO/0/1 on RTA contains a MAC address of 00e0-fc03-aa73 and is configured with the IPv6 address 2001::260ffiCFF:FE03:M73.
Which method has been used to configure the interface IPv6 address?
❑ A. DHCP/6
❑ B. Auto-link.
❑ C. ARP.
❑ U. EUI-64 (Right Answers)
Answer: 0
131.A network administrator has been assigned the IP address segment 192.168.176.0125, from which he/she must allocate a subnet to support 20 users in the marketing department.
Which IP subnet best supports this requirement?
❑ A. 192.168.176.0/25
❑ B. 192.168.176.0/30
❑ C. 192.168.176.48/29
❑ D. 192.168.176.96/27 (Right Answers)
Answer:
Answer:
Answer: F
134.Refer to the graphic.
SWA
Page Pon
▪ Hos P
An administrator has configured the port interface G0KIT3 of Switch A as an edge port.
The user wishes to connect multiple devices to the network and connects his own managed switch to the network,
What effect will this have on the network?
❑ A. Port interface G0/0/3 of switch A will shut down, as a BPDU has been received by the edge port_
❑ B. Port interface G0/0/3 of switch A will forward the data normally and drop the BPDU sent by the host to the switch.
❑ C. Switch A will receive the BPDU and recaculate the port state of G0/0/3. (Right Answers)
❑ D. Only Host A can send data out as before, the other devices linked cannot_
Answer: C
135 An administrator currently manages AR2200 devices in the network through a single password, however the company wishes to introduce another two administrators and provide unique user credentials and privilege levels for telnet access
to the network devices.
Whet action can be taken? (Multiple Choice)
❑ A Configure three users under the AAA-New. and assign each a different password. (Right Answers)
❑ B. The authentication mode must be changed to AAA (Right Answers)
❑ C. Each administrator must be assigned a priNlege level. (Right Answers)
❑ D. A public IP address must be assigned to each user for telnet access.
Answer: ABC
136.1-low many probe packets are sent far each TTL value by defauk when "traced" is used to detect the path along which packet is sent horn source to destination?
❑ A 3 (Right Answers)
• 4
❑ C. 6
❑ D. 8
Answer: A
137.VVhich of the following statements regarding the "port trunk allow-pass Nan all" command is true?
❑ A The specified port allows all VLAN IDs to pass through (Right Answers)
❑ B. The peer port connected to this port must have the same port trunk allow-pass Nan all command configured.
❑ C The peer device connected to this port can dynamically determine which VLAN IDs are allowed to pass through.
❑ D. If the port default Nan 3 command is run on the connected remote device. VLAN 3 will be blocked between the two devices.
Answer: A
138.VVhich of the following commands is used to display the OSPF neighbor relationship establishment?
❑ A. display ospf neighbor
❑ B. display ospf brief
❑ C display ospf peer (Right Answers)
❑ D. display ospf interface
Answer: C
POW Roe
=1%02 1-er"71412A0
1
10.1.1.2/24
On the interface serial 1/0/1 of RTA, the command "ip address unnumbered interface loopback 0" has been configured.
Which following statements are correct? (Multiple Choice)
❑ A. The IP address of RTA interface serial 1/0/1 is 10.1.1.1/24.
❑ B. The IP address of RTA interface sepal 1/0/1 is 10.1.1.1/32. (Right Answers )
❑ C. The route entry 10.1,1.0/24 Wets in RTA's routing-table.
❑ 1/Themute entry 10.1_1.0/24 does not exist M RTA's routing-table. (Right Answers)
Answer: BD
140.A DHCP server in the enterprise network is being used to allocated IP addresses to hosts. An administrator discovers however that some hosts are obtaining P addresses outside of the scope of the DHCP server's address pool.
What are the possible reasons for this? (Multiple Choice)
❑ A Another DHCP server exists in the network and is allocating IP addresses to hosts that happen to be within a closer proximdy than the authorized DHCP server (Right Answers)
❑ B. The hosts were unable to discover a DHCP server and therefore generated their own address in the 169.254.0.0 address range (Right Answers)
❑ C. The hosts were unable to discover a DHCP server and therefore generated their own address in the 127.254.0.0 address range.
❑ D. All addresses from the DHCP pool harm been assigned. (Right Answers)
Answer: ABD
141 In RSTP, a backup port can replace a faulty root port
0 A. TRUE
OB. FALSE (Right Answers)
Answer: F
142.When two switches are connected through link aggregation, what we the requirements for the interfaces on the two switches? (Mukiple Choice)
❑ A The physical interface quantities of the interconnected switches are the same. (Right Answers)
❑ B The physical interface rates of the interconnected switches are the same. (Right Answers)
❑ C. The duplex modes of the physical interfaces on the interconnected switches are the same. (Right Answers)
❑ D. The physical interface IDs of the interconnected switches are the same.
❑ E. The models of the optical modules used by the interconnected switches are the same.
Answer: ABC
143.8 Frame Relay implements dynamic address mapping for the PVC. which protocol will be used?
❑ A. LMI protocol.
❑ B ARP protocol.
❑ C. RARP protocol.
❑ D. In ARP protocol. (Right Answers)
Answer: 13
144 Which of the following protocols is used in Frame Relay to map the address to DLCI dynamically?
❑ A. ARP protocol.
❑ B. RARP protocol.
❑ C In ARP protocol (Right Answers)
❑ D. MAP protocol.
Answer: C
145.Which of the following statements regarding link-state database and routing-table of a "single" OSPF area are correct? (Multiple Choice)
❑ A The fink-state databases that all routers build are identical (Right Answers)
❑ B. The link-state databases that all routers build are different.
❑ C The routing-tables that all routers calculate are different (Right Answers)
❑ D. The routing-tables that all routers calculate are identical.
Answer: ACH12-211-4
148. Which of the following statements regarding the routing table are correct? (Multiple Choice)
❑ A. The next hop in the routing table is redundant because the outgoing interface can be used for packet forwarding.
❑ El The routes from generated by different protocols have different preferences (Right Answers)
❑ C. The metrics of different routing protocols are comparable.
❑ D. The metrics of different routing protocols are not comparable. (Right Answers)
Answer: BD
147.An ACL does not filter traffic generated by the Huawei device towards other devices, but only filters forwarded traffic, including traffic generated by other devices to access the Huawei dew
OA. TRUE (Right Answers)
0B. FALSE
Answer: T
148.Which of the following are the features of the default VLAN setting in a switch configuration? (Multiple Choice)
❑ A. The default VLAN cannot be deleted manually. (Right Answers)
❑ B. By default. all ports on switches are member ports of a default VLAN (Right Answers)
❑ C. A default VLAN must be created before a pod is allocated to a VLAN.
❑ D. The IP address configured for a switch is applied only to a member port in the default VLAN.
Answer: AB
149.Which of the following descriptions about IPA addresses are correct? (Mukiple Choice)
❑ A. IPv6 addresses are 64 bits in length.
❑ B IPM addresses are 128 bits in length (Right Answers)
❑ C. IPM extension headers are processed in order (Right Answers)
❑ D. IPM extension headers are processed randomly.
Answer: BC
150 Which of the following statements regarding the verification of IP connectiWty are false? (Multiple Choice)
❑ A The ping 127.0 0.1 command can be used to check whether the network cable is correctly inserted into the host's Ethernet port. (Right Answers)
❑ B The ping command with the host IP address as the destination can be used to venfy that the TCP4P protocol suite is functioning correctly. (Right Answers)
❑ C. The ping command can be used to verify connectivity between the host and the local gateway.
❑ D. The command "wconfig /release" can be used to check connectivity problems between the host and the local gateway. (Right Answers)
Answer: ABD
151 Refer to the graphic.
are Server A
PAPI PALII
RTA is a PPPoE client, and sends PADI packets to Server A. which type message is used for sending PADI packets?
0A. Unicast.
❑ B. Multicast
❑ C Broadcast (Right Answers)
❑ D. Anycast.
Answer: C
152.In RSTP mode, both alternate and backup ports cannot forward user traffic but can reserve. process, and send BPDU.
CA. TRUE (Right Answers)
OB. FALSE
Answer: T
Switch Router
50/0/1 G0/0/0
G0/0/2
The host has a problem establishing a telnet connection with the router attached to interface GO/0/0. Which of the following steps can be used to help the administrator identify the problem? (Multiple Choice)
❑ A. Check whether the host has configured the gateway IP address.
❑ B. Check whether the switch has configured the gateway IP address.
❑ C. Use the ping tool to check connectiWty between host and router. (Right Answers)
❑ D. Check the telnet server configuration is right on the router. (Right Answers)
Answer: CD
154.In a broadcast address. all host bits are set to 1 and a broadcast address can be used as a host address.
OA. TRUE
CO FALSE (Right Answers)
Answer: F
The display stp brief command is used to check the summary SW information of a switch.
With regards to the output, which of the following statements is incorrect?
❑ A. The network may or may not contain a single switch.
❑ B. This switch is the mot switch of this network
❑ C. This switch is the designated switch to any peering switches.
❑ D. This switch must have linked to 6 hos& through the 6 interfaces displayed (Right Answers)
Answer: D
156.0n Huawei deices, which of the following methods can be used in OSPF router ID selection? (Multiple Choice)
❑ A. If a loopback interface is configured, the largest IP address of the loopback interface is selected as the router ID (Right Answers)
❑ B loopback interfaces are not configured, the largest IP address of an interface is selected as the router ID (Right Answers)
❑ C A Huswei switch may use the largest IP address of VLANIF interfaces as the router ID. (Right Answers)
❑ D. The default ID 127.0.0.1 is selected as the router ID.
❑ E A valid router ID can be configured manually. (Right Answers)
Answer: ABCE
157 In a small network suppporting IR6, a network administrator wants to implement RIPng.
Which of the following commands should be used to enable this protocol?
0 A. [RTA-GgabtEthemet0/0/0]npng 1 enable (Right Answers)
❑ B. [RTA]ripng 1 enable
❑ C. <RTA,ripng 1 enable
0 D. [RTA-ripng-1]ripng 1 enable
Answer A
Which of the following statements is correct when this router forwards the packet to the destination host 9_1_4.5?
❑ A. The router selects the first entry to match the destination address of the packet because the preference of OSPF is higher than the preference of RIP.
❑ B. The router selects the second entry to match the destination address of the packet because the cost of RIP is lower than that of OSPF,
❑ C The router selects the second entry to match the destination address of the packet because the outgoing interface is an Ethernet interface. The forwarding speed of an Ethernet interface is faster than the forwarding speed of a serial
interface.
▪ The router selects the second entry to match the destination address of the packet because the router will match the most specific address (Right Answers)
Answer: D
RI R2 M13
GIO-6-6)
When R2 (awards data to R3 from RI. which of the following gems will change? (Multiple Choice)
❑ A. The source MAC address. (Right Answers)
❑ B. The desimation MAC address. (Right Answers )
0 C. The source IP address.
❑ D. The destination IP address.
Answer: AB
160.A switch receives a MAN tagged frame, but the destination MAC address cant be found in the switch, s MAC address table, how will the switch react?
0 A The switch will broadcast this frame to all ports.
❑ B The switch will broadcast this frame to all ports in this VLAN. (Right Answers)
❑ C The switch will broadcast this frame to all access ports in this VLAN.
❑ D. The switch will discard this frame.
Answer: B
161 NAPT uses the same public IP address but different port numbers to translate prWate IP addresses. Which statement regarding the port number is conect?
❑ A It is necessary to configure port number mapping manually.
0 B. It is only necessary to configure the pod number range.
❑ C It is not necessary to configure port numbers. (Right Answers)
0 D. An access control list is needed to assign port numbers.
Answer: C
162.Refer to the graphic, after the ping 10.1.1.2 command is executed on R1 LSW1 receives a tagged data frame from VLAN 10 on LSW2.
1.5W1 L5W2
560/0/1 GEO/0/2
41) o eo/0/0 660/0/2
6211Interface GgebitEthernet0/0/0
GigabitEthernet0/0/06p address 10.1.1.1 255.255.255.0
95W19nterface GagabitEthernet0/0/1
-
05W1 Gigabit6themet0/0/11 part hybrid untageerl Wan 10 20
Gigabilfthernet0/0/11 port hybrid avid A. 10
95w11 interface eigatetEthernet0/0/2
Itswa- 6igabitetherneto/opiport link-type trunk
KIWI- 6igabitethemeto/opiport trun k allowpass elan 10 20
9.5,921interface Ggabitahernet0/0/2
05W2- GigebitEthernet0/0/2]port link-type trunk
-
05W2 GigabitEthemet0/0/21port bunk allow-pass vlan 10 20
95W21 interface vlanif 10
05W2-Vlanif101ip address 10.1.1.2 255.255.255.0
Answer: T
163.FTP and TFTP can be used to update the system file on Huawei routers.
Which of the following statements are correct? (Multiple Choice)
0 A Huawei router can be configured as FTP Client (Right Answers)
❑ B Huawei router can be configured as FTP Server. (Right Answers)
E C. Huawei router can be configured as TF1P Client (Right Answers)
❑ 0. Huawei router can be configured as TFTP Sewer.
Answer: ABC
ISP
111
4111
W DE1/0/0 552/0/0
19116801 202.10,2
192.168.0.2 202.10.1.1
lallinterface Gigabitethernet1/0/0
811-DigalaitEtbernet1/0/01 ip address 192.168.0.1 255.255.255.0
I8llinterface DiDsbitEthemet2/0/0
1111-GigabitEthemet2/0/0fin address 202,10.1.2 255.255.255.0
Intinatstatic global 202.10.1.3 inside 192.168.0.2 netrnask 255.255.255.255
I211 ID route-static 0.000 000.0 202101.1
When a PC connected to R1 accesses the Internet. the destination address in the packets does not change.
0A TRUE (Right Answers )
0 B. FALSE
Answer: T
165 While inspecting packets in the network, a network administrator discovers a frame with the destination MAC address of 01-00-5E-A0-B1-C3.
What can the administrator determine horn this?
O A. The MAC address is a unicast address.
❑ B. The MAC address is a broadcast address.
❑ C The MAC address is a multcast address (Right Answers)
0 D. The MAC address is incorrect.
Answer: C
166.Refer to the graphic. the routing table includes direct routes and static routes and the preference of the direct routes cannot be changed.
DivaweisdisplaV ip muting-table
Route Flags: IF- relay, D - download to fl
Answer: T
167.In an RIP process on a Huawei device, you can use the preference command to configure the RIP route preference. After executing the command, you can specify routing policies to configure preferences for the routes meeting
requirements.
0 A TRUE (Right Answers)
0 a FALSE
Answer: T
Following configuration, a host is connected to the interface Gigabit Ethernet 0/0/1 of the router.
Which IP actress will the client obtain?
0 A. An IP address horn network 10.10_10.0/24 will be assigned. (Right Answers)
10 B. An IP address from network 10.20_20.0/24 will be assigned.
I0 C. The host will be unable to obtain an IP address.
0 a An IP address may be assigned horn either 10_10.10_0/24 or 102020.0/24.
Answer: A
169.Which of the following parameters must be considered during root port selection in STP? (Multiple Choice)
❑ A Cost to the root switch. (Right Answers)
❑ B Port priority. (Right Answers)
❑ C. Slot ID of the port. such as GO/0/1 (Right Answers)
❑ D. Port MAC address.
❑ E. Port duplex mode.
Answer: ABC
170 In the VRP system. you cannot delete files by running the delete or unreserved wpcfg.mp command. You must clear files in the recycle bin.
OA. TRUE
CO FALSE (Right Answers)
Answer: F
Answer: D
173.A port directly connects to a designated port on the peer device and is used to receive BPDU to monitor the changes occurring in the network. However, it does not forward any packet.
Which tithe following ports represents this port?
❑ A. Root Port.
❑ B. Designated Port.
❑ C Alternate Pod. (Right Answers)
❑ D. Disable Port.
Answer: CH12-211-5
174.A trunk interface allows frames from multiple VIANs including ULAN 4096.
OA. TRUE
El FALSE (Right Answers)
Answer: F
PTA 1171,1
50/0/1 50/0/1
An administrator has configured RIPv2 on the two routers. following which he implements the command silent-interface s0/0/1 on RTA.
What effect will this command have on the network? (Multiple Choice)
❑ A. RTA will continue to learn routes from RTB. (Right Answers)
❑ B. RTB will continue to learn routes from RTA.
• RTA will have no neighbor relationship with RTB.
❑ a RTB will have no adjacency relationship with RTA. (Right Answers)
Answer: AD
176.A configured intemal host of a private network wishes to access the intemet.
What must be configured on the enterprise network egress muter in order to achieve this? (Multiple Choice)
❑ A NAT Easy IP (Right Answers)
❑ B. DHCP.
❑ C. BGP.
❑ 13. Default route. (Right Answers)
Answer: AD
177 The following figure shows the network topology and OSPF area partition. Routers R2, R3, and Rd are OSPF ABRs but R1 is not.
OA TRUE
05 FALSE (Right Answers)
Answer: F
178.VVhen a network administrator configures SW in the network, BPDU begin to be sent by switch.
Which of the following statements regarding the BPDU frame are correct? (Multiple Choice)
❑ A A BPDU uses the IEEE 802.3 standard frame type (Right Answers)
❑ B. A BPDU uses the Ethernet II standard frame type.
❑ C The BPDU frame's control field is 3 (Right Answers)
❑ D. The destination MAC address field of a BPDU flame is a broadcast address.
Answer: AC
OSPF is used on four routers that are in the same area and on the same network segment. In this scenario, OSPF selects one DR and multiple BDRs to ensure backup.
OA. TRUE
OB FALSE (Right Answers )
Answer: F
180.As specified by the RSTP protocol, when a root port fails, which type of port will function as a new root port and enters the forwarding state wkhout any delay?
❑ A. Forwarding Port.
❑ B. Alternate Port (Right Answers)
❑ C. Backup Port.
❑ D. Edge Port.
Answer: B
181.For project cutover, backup or adjustment of configuration files are not required during VRP upgrade, because lost files can be found in the recycle bin.
OA. TRUE
0 El FALSE (Right Answers)
Answer: F
Hest 1.10
MANS 0IAN 0
Communication should be established between Host A and Host B. VLAN 2 has been created on SWA and SW13. The ports connected to the hosts are access ports and belong to VLAN 2. Port interfaces GO/0/1 on SWA and GO/0/2 on
SWB we trunk ports and permit all VLAN to pass. All that remains is for the administrator to configure SWC.
What should be be configured in order to achieve the task?
❑ A. The administrator needs only to create VUkhl 2 on SWC_
❑ B. The administrator must set G0/0/1 as a trunk port and permit VLAN 2.
❑ C. The administrator must set both GO/0/1 and GO/0/2 as trunk ports and permit VLAN 2.
❑ D. The administrator must create VLAN 2 and set both GO/0/1 and GO/0/2 as trunk ports and permit VLAN 2_ (Right Answers)
Answer:
183.In ARP resolves the protocol address of the remote device on each virtual circuit, including IP addresses and IPX addresses.
0 A. TRUE (Right Answers)
OB. FALSE
Answer: T
184 The PPPoE session establishment process can be divided into which stages? (Multiple Choice)
❑ A Discovery stage (Right Answers)
❑ B. DHCP stage.
❑ C PPPoE Session stage. (Right Answers)
❑ a PPP connecting stage.
Answer: AC
185 The following configuration shows that the IP address of GEO/0/0 on a device is incorrect because the IP address of the interface cannot end in 0
(Huawei)interface GigabitEthemet0/0/0
Nuawel-GigabitEthernet0/0/08p address 19.224.17.0 255.255.128.0
OA. TRUE
0E1 FALSE (Right Answers)
Answer: F
186 Which of the following statements about collision domains and broadcast domains are correct? (Multiple Choice)
❑ A Devices connected to the same Hub forma collision domain (Right Answers)
❑ B. Devices connected to the same hub form a broadcast domain. (Right Answers)
❑ C. Devices connected to the same bridge form a collision domain.
❑ D Devices connected to the same bridge form a broadcast domain. (Right Answers)
❑ E. Devices connected to the same router form a broadcast domain.
Answer: ABD
.siluawela system-slew
[Huawel]cnrernand-priWk.se level 3 slew user save
Answer: B
108.0n Sx7 series switches, which of the following VLANs can be removed by using command "undo, (Multiple Choice)
❑ A. Nan 1.
❑ B vlan 2 (Right Answers)
❑ C. vier; 1024 Might Answers)
❑ D Nan 4094. (Right Answers)
Answer: BCD
189 The users who log on the router through Telnet are not pemldred to configure IP address
What is the possible mason?
E, A Comm...calm failures occur between the user and the router
E E. The authentication mods of Wm is set Incorrectly
C Privilege level of Telnet is set Inconectly (Right Answers)
E D BUMP perainethis ere sal incorrectly
Answer( C
A era SWB
Answer: CDH12-211-6
191.Following a failure of services in the network, an administrator discovered that the configuration in one of the enterprise routers had been changed.
What actions can be taken by the administrator to prevent huffier changes? (Multiple Choice)
P A The administrator should limn access by setting the login privilege of users to level 0 (Right Answers)
❑ B The administrator should configure AM to manage user authorization on the router. (Right Answers)
❑ C The administrator should configure an ACL to allow only the administrator to manage the router. (Right Answers)
❑ D. The administrator should configure port-security on the router.
Answer: ABC
Answer: B
193.According to the configuration on R1 shown in the following figure, the two PCs can correctly access the ISP network.
Cereal
LSW1 Ri
152.168.0.1
GE0/0/3 GE0/0/1
Caw. GEO/0/0
200.100.1.1
102.16110.2 IMIed number 2000
In1-ad-basic-2000Irate 5 permit source 192.168.0.0 0.0_0.255
gulinterfaceGigabitEtherneto/oto
Int-Gigabitetherneto/o/o go address 192.168.0.254 255255.255.0
1111linterface Gigabitethernet0/0/1
1121-eleabiatherne10/0/11ip address 200.100.1.2 255.255.255.252
la1-eicabitethemet0/0/1inat outbound 2000.N-in
OA. TRUE
O B FALSE (Right Answer)
Answer: F
Answer: AB
195.In the RSTP standard, a port is able to connect to a terminal directly and enter the forwarding state without delay.
Which of the following ports represents such a port?
P A. Fast port.
IE B. Backup port.
IE C. Rout port.
❑ D. Edge port. (Right Answers)
Answer: 0
TOG On Huelva AR G3 Sanas mamma. rtkoch authentication modes does MA support? (Multiple Chace)
El A None (Right Answers)
❑ S Local alight Answers)
1=1 C Radius (R39h1 Answers)
El a 902 111.
AEC
197 In the PPPoE discovery stage, the PPPoE server assigns a session-id to the PPPoE client in which packet?
El A PADI.
0 B. PROD.
0 C. PADR.
❑ D PADS (Right Answers)
Answer El
198 Refer to the graphic.
The network administrator wants to improve the performance of network transmission, what steps can the administrator take? (Multiple Choice)
❑ A. Change the working mode to full duplex of each end station. (Right Answers)
❑ R Link the end stations together using a switch. (Right Answers)
❑ C. Change the working mode to half duplex of each end station.
❑ Th Link the end stations together using a hub.
Answer: AB
199.According to the topology and configuration of interconnected interfaces of switches shown in the figure, the data frame tagged with WAN 10 can be forwarded correctly between the two switches.
LSW1 LSWI
GEO/0/1 GEO/0/1
ttSWIlinterrace GiunbrtEthernet0/0/1
KSWI-GigabitEthernet0/0/11Port link-type trunk
itSWI-GisabitSthernet0/0/1Isort Nook pod vlan 20
ILSWI-Globitfthernet0/0/11Port trunk allow-pass Nan 10
(LSW2linterfare GisabitEthemet0/0/1
ILSW2-GlgaintEthemet0/0/11Port link-type trunk
DSW2-GigebitEthemet0/0/1Wort trunk pvid Nan 10
tl.SW2-GlgebitEthernet0/0/11Part trunk allow-pass Wan 10
OA. TRUE
C O FALSE (Right Answers)
Answer: F
200.VVhich of the following statements is true about the PPP configuration and deployment?
❑ A. PPP cannot be used to deliver IP addresses.
❑ B PPP supports both CHAP and PAP authentication (Right Answers)
❑ C. PPP cannot change the keepalte time.
❑ D. PPP does not support bidirectional authentication.
Answer: BH12-211-7
201Which of the following statements about a designated port working in RIPv2 multicast mode are true?
(Multiple Choice)
❑ A The pod receives only RIFV2 multicast packets. (Right Answers)
❑ B. The port does not receive RIPA broadcast packets. (Right Answers)
❑ C. The port does not receive RIFV2 broadcast packets (Right Answers)
❑ D. The port receives only RIFM multicast packets.
Answer: ABC
202. When using VRP, which of the following commands is used to configure the data link layer encapsulation type of a serial interface as HDLC?
❑ A. encapsulation hdlc.
❑ B fink-protocol hdlc (Right Answers)
❑ C. hdlc enable.
❑ D. link-protocol ppp.
Answer: B
203 On an FR network you can use the h interfacetype ate command on the enrol witerface to ensure that the attribute of V 35 is OTE
Answer: F
204..In a network that supporting IPv6, which OSPF feature is no longer supported ?
❑ A. multiple areas.
❑ B. Router-ID.
❑ C authentcation. (Right Answers)
❑ D. multicast updates.
Answer: C
205.Which of the following problems may emerge when a loop masts on a router? (Multiple Choice)
El A. Infinite packet forwarding.
❑ B Increased CPU usage (Right Answers)
❑ C Increased memory usage (Right Answers)
P D. Continuous change of destination IP addresses of packets
la E. Increased packet size.
Answer: BC
2136 PPP is more secure than HDLC because PPP supports authentication protocols such as 0. (Multiple Choice)
❑ A PAP (Right Answers)
P B. MD5_
❑ C CHAP (Right Answers)
la D. SSH.
Answer: AC
207.Two routers have established a point-to-point network using PPP. The administrator has configured the routers tEl run OSPF in the same area with the same router ID, what behavior will occur as a result of the configuration?
a A. The routers will build a neighbor relationship even though both routers are using the same router ID.
❑ B. VRP will notify of a router ID conflict between the two routers (Right Answers)
0 C. The routers will build an adjacency even though both routers are using the same router ID.
0 D. The routers will not send hello packets to each other because they are using the same router ID.
Answer: B
Answer: A
209. On Huawei AR G3 Series routers. which authentication modes does AAA support? (Multiple Choice)
la A. None. (Right Answers)
❑ B Local. (Right Answers)
la C. Radius. (Right Answers)
0 D. ace.ix.
Answer: ABC
4
RM
GO/0/1 00/0/1
In order to improve security, the two hosts use IPsec VPN to transmit data.
Which IPsec mode and protocol can be used to hide the host's IP address? (Multiple Choice)
❑ A. AH.
0 B. Transport mode.
0 C. Tunnel mode. (Right Answers)
0 D. ESP. (Right Answers)
Answer: CD
211. Refer to the graphic, 00e04c99-9999 is a specific host MAC address learned by a switch through ARP and the host changes the IP address three times.
Answer: F
212 On Huswei deacon. admin:snalors can adeemse a sublet In RIPs2 because RIN2 supports YLSM
TRUE
FALSE
Answer: El
213.The administrator cannot use telnet to manage the AR2200. The administrator is able to verify connectivity to the router and has been informed that other administrators have no difficulties using telnet. Which statements describe the
possible reasons for this problem? (Multiple Choice)
P A The users status has been blocked (Right Answers)
E B. The user's prniledge level has been changed to 0.
❑ C The user has been deleted (Right Answers)
El D. The telnet service in the AR2200 Muter has been disabled.
214.Refer to the graphic. The routing table contains the routes of the RTB. Which advertised route will not be found in the routing table of the neighboring router RTA?
0000t0t0ey routtnelstat
Route Hags relay, 0 - *doe] tut fib
to.o.n.wee tonseede
1003.0/24
FRC
215.Refer to the configuration output. Which of the following statements are correct regarding the configuration of the ACL on RTA? (Multiple Choice)
[RN.] 2001
(RTA-act-basic-2001)rele de, source 172.16.1.1 0.0.0.0
(RTA-acl-basic..2001jrule deny source 172-16.0.00.255.0.0
Answer: AD
Answer: B
217.ARP can resolve the MAC address of a target device based on the destination IP address and realize mappings between data fink addresses and IP addresses .
0 A, TRUE (Right Answers)
OB. FALSE
Answer: T
Answer: T
219. Which SNMP version focuses on two main aspects, namely security and administration. The security aspect is addressed by offering both strong authentication and data encryption for privacy. The administration aspect is focused on two
pats, namely notification originators and proxy forwarders .
C A. SNMPv1
❑ B. SNMP/2
0 C. SNMF2c
❑ D SNMPv3 (Right Answers)
Answer: B
Answer T
221.An Ethernet port can work one of three duplex modes. whereas an Optical Ethernet port only supports one single mode. Which of the following represents this mode?
O A Full-duplex. Right Answers)
O B. Flag-duplex.
E C. Auto-negotiation.
E D. Simplex.
Answer: A
222 VLSM can expand any IP network segment, including Class CI addresses.
OA. TRUE
B FALSE (Right Answers)
Answer: FH12-211-t
223A DHCP Offer packet can carry only one DNS server address.
OA TRUE
OB FALSE (Right Answers)
Answer: F
224 Two maters are connected through serial interlaces and support PPP encepsulMion Wroch parameters must be negotrated to establish the PPP connection',
:Mogrtde Choke)
I:I A MR11 (Right Answers )
B Aulhenteaton Password
C Mag.c-Number (Right Answers)
B krillen.a1,,n Protocol (Right Answers)
Answer ,ACO
225 The following configalrgbon coerasarrde Implement route backup on RTA tor a route to the same deal:nab. 10 1 1 0
Answer: F
Answer: ABC
227 If PPP authentication fails. which type of packet will be sent to the authenticated peer by the authenticator?
A. Authenticate-Ack.
0 B Authenticate-Nak (Right Answers)
El C. Authenticate-Reject.
❑ 0. Authenticate-Reply.
Answer: B
228 Whch at the folluenng storage dermas used Ire store the siartup configuration files or a router?
Fl A SCRAM
❑ B NVFVfil
0 C Plash(Right Answers>
0 0 BootROM
Anawert C
229.According tD the configuration of single-armed routing in the following figure, the administrative department and finance department can communicate with each other even if proxy ARP is disabled on the subinterface on RI.
(618nterfaceGigabdEthernet0/0/0/
011-6igabit6themet0/0/0.11dono termination vid 10
[(11-6igabitgthernet0/0/0.11 to address 192.168100154 255/55.255.0
InsjinterfacegigabitEthernet0/0/0.2
041...GigabilEthemet0/001.2jdotlo termination yid 20
[R1-GigabrtEthemet0/0/112) 1p address 192.168/00.254 255155.255.0
OA. TRUE
0 B FALSE (Right Answers)
230 When a router is powered on, the router reads the configuration file saved in the default save directory to get itself initialized. If the configuration file does not exist in the default save directory, what does the router use to initialize self?
❑ A. New configuration file.
❑ B. Initial configuration file.
❑ C. Default parameters (Right Answers)
❑ D Current configuration file.
Answer: C
231.9Vhich of the following statements are true about ACL deployment on Huawei devices? (Multiple Choice)
ACL can only be used in the outbound direction of an interface.
❑ B. The same ACL can be used on multiple interfaces (Right Answers)
❑ C. The ACL rules can only be configured in the following sequence: 10, 20, 30...
❑ D. ACLs cannot be used to filter OSPF traffic because OSPF does not use UDP to encapsulate packets.
❑ E. ACLs can be used to match with the TCP/UDP port IDs of packets and to designate the port ID range (Right Answers)
Answer: BE
232.In PPP, you can use the "map chap authentication' command to enable CHAP authentication.
OA. TRUE
El FALSE (Right Answers)
Answer: F
233.After checking the OSPF neighbor state, the administrator discovers that the muter has established a TWO-WAY state with the peering router. What can be understood from this n mation?
❑ A. The routers are configured using the same process ID.
❑ B. The routers are configured using the same area ID.
❑ C. The routers are configured using wrong router ID.
❑ D The routers are considered ORothers in a broadcast network (Right Answers)
Answer: D
234.Refer to the output. When the administrator first starts the router, a system notice is displayed, however after rebooting this router, the notice disappeared. What is the reason for this? (Multiple Choice)
umes.
warning: num-conga Is working. Before configuring the device, stop nuto-fOnfig.
if you perform configurations when Auto-fang' h running. the Dlif P, routing.
DM, and VTY configurahons wig be lost. Do you want to stop Auto-f onfrg? [WO
❑ A. This notice only appears during the very first device startup.
❑ B The administrator has configured the deece and saved the configuration, causing the notice to disappear (Right Answers)
❑ C. The administrator selected 'n and did not save the configuration.
❑ D The administrator selected y and saved the configuration (Right Answers)
Answer( BDH12-211-9
235. A client failed to transfer a file to the FTP server, but found the IP connectivity was without
problem. The client assumed that the problem was with the port configuration. The blocking of
which ports would likely cause this problem? (Multiple Choice)
❑ A 21 (Right Answers)
❑ B. 8t
❑ C. 20 (Right Answers)
❑ 0. 50649
Answer: AC
236 Layer 2 switches are data link layer devices that identify MAC addresses of Layer 2 data frames and forward Layer 2 data frames based on MAC addresses. In addrtion. they record mappings between MAC addresses and interfaces M the
MAC address table.
OA TRUE (Right Answers)
013 FALSE
Answer: T
Answer: D
238 How many VLANs are created when using the commands 'Man batch 10 20' and "vian batch 10 to 20'7
❑ A 2 and 2
❑ El 11 and it
❑ C 11 and 2.
❑ D 2 and 11 (Right Answers)
Answer:
239 Refer to the graphic. PTA is a PPPoE chant. and sends PADI packets to Seim A which type message is used 8w sending PADI packets?
❑ A Unicast
B Muff roast.
❑ C Broadcast (Right Answers)
0 0 Anycast
Answer: C
240 If AH and ESP are both required to protect data streams between IPsec peers. how many Security Associations (SA) are required ?
❑ A. 1
❑ 13 2
❑ C. 3
❑ D 4 (Right Answers)
Answer:
The administrator wishes to configure the DHCP sewer pool in order to assign an IP address to the customers terminal device_ Which command should be included in the configuration to provide the minimal lease period for IP addresses?
❑ A dhcp select relay.
❑ El lease day 1. (Right Answers)
❑ C_ lease 24.
❑ D lease 0.
Answer: B
242 Which of the following statements regarding Designated Routers in OSPF are correct? (Multiple Choice)
❑ A DR Is elected by all the routers in the same network segment (Right Answers)
❑ B. lithe priorities of two routers are different. the router with the lower priority will be elected as DR.
❑ C lithe priorities of two routers are equal. the router with the higher Router ID will be elected as DR (Right Answers)
DR and BDR must be establish adjacency relationship (Right Answers)
Answer: ACD
,
243 An AR2202 reiner re required to he ....figured Aare scratch 'Mich anise an needed to se hurat ,Fr. (Multiple Choice)
❑ A Reset the sired configuralren (Right Answers)
Clear the miners configrraten.
❑ C Reboot the AR2290 (Right Answers
❑ 0 Maw the conegorehon Al to be used at next strewn
M.1.1% AC
244.A company applies fora class C IP address for sobnetting It has six branches and the largest branch should have 26 hosts. What would be an appropriate subset mask for the largest branch?
a A. 255.255.255.0
E B.255255.255.128
❑ C. 255.255.255.192
a D. 255.255.255.224 (Right Answers)
Answer:
245 When a twowey ought,ar reiatensbp ra 001 up between two OSPF-eneded routers it means the LSCB synchrunaehon has been completed but the SPF algorithm has not beer perforrned yet
OA TRUE
OB FALSE (Right Answers)
246 Refer to the graphic. GEO/0/1 and GEO/0/2 on the switch are configured as hybrid interfaces. Which of the following statements are true? (Multiple Choice)
11.11interface 6MIEthemet0/0/1
luwt GfgadlEthernet0/0/11port Mlaria mt.. v1.1010
law OgalanEthe meta/0/110>n hybrid pvi,, 01 e to
sjinterlace .igabillthetnel./3
-
E.W1 eigablatherne././21Part hybrid unbue4 Nan 10 20
1..-GrgelAtthemet0/0/2ipert hybrid p•Ad dm 20
I: A. The administrative department and the finance department cannot communicate with each other because the VLANs of the two departments are different_
❑ e. The data frames sent by the administrative department carry tagged VLAN 20 on the switch.
❑ C. On the switch. the data frames sent by the finance department carry tagged VLAN 20 (Right Answers)
0 D. The switch can be a Layer 2 or Layer 3 switch because communications do not need to be transmitted through a Layer 3 gateway (Right Answers)
0 E. If GEO/0/1 and GEO/0/2 on the switch are changed to trunk parts. the administrative department and finance department can communicate with each other_
247.An Ethernet frame is captured by wireshark and the value of Type/Length 'field is Ox0800. Which of the following statements about the frame are correct? (Multiple Choice)
a A The frame format is Ethernet_II. (Right Answers)
a B. The frame format is IEEE802.3.
❑ C Its upper layer protocol is IP (Right Answers)
a D. Its upper layer protocol is IPX.
Answer: AC
248. A DHCP Unique Identifier (DUID) in DHCPv6 can be configured in VRP using which formats? (Multiple Choice)
a A DUID-LL (Right Answers)
❑ B DUID-LLT. (Right Answers)
a C. DUID-EN.
a D. DUID-LLC.
Answer: AB
249.Refer to the graphic. Which of the following statements describes the network shown? (Multiple Choice)
Answer: BC
250.The IP addresses of clients in the network are deployed via a DHCP server. When a host reboots, which message will the host first send to the DHCP server?
a A. DHCP DISCOVER.
❑ B DHCP REQUEST (Right Answers)
a C. DHCP OFFER.
a D. DHCP ACK.
Answer: B
251 Assume that the router has learnt the best route to the same destination by using RIP, OSPF and Static Route respectively. By default, the Huawei router will select the route learnt via ( ) as the best route.
❑ A. RIP.
❑ B OSPF (Right Answers)
❑ C. RIPv2.
❑ D. Static route.
Answer: B
Answer: A
253 Refer to the graphic. A web server in a private network is required to provide HIP services to public users. The network administrator is required to configure NAT on RTA. Which configuration should be used?
WWW Server
51/0/1
00/0/1
1.9216011/29
❑ A [RTA-Seria11/0/11nat server protocol tcp global 202.10 10.1 www inside 192.168.1.1 8080 (Right Answers)
❑ B. [RTA-Seria10/0A]nat server protocol tcp global 192.168.1.1 shwa inside 202.10.10.1 8080
❑ C. [RTA-Dgabitethernet0/0/1]nat server protocol tcp global 202.10.10.1 www inside 192.1681.1 8080
▪ [RTA- Gigabrtethernet0/0/1Nat server protocol tcp global 192_168.1_1 www inside 202.10.10.1 8080
Answer: A
.n10 Vlan20
Gateway: 10.111154 Gateway: 10.02259
255. Which of the following parameters must be specified when configuring static mapping for Frame Relay network? (Multiple Choice)
❑ A Local DLCI Right Answers)
❑ 13. Remote DLCI.
❑ C. Local network layer protocol address.
❑ D. Remote network layer protocol address (Right Answers)
Answer: AD
256 A layer 2 L4N switch generates CAM tabto entries according to the ) of the received hams
❑ A Source MAC address (Right Anavren
❑ B. Destination MAC address
❑ c Sawce le address
❑ [.1 Pesbratam IP address
Answer: A
257.0n Huawei VRP platform, which of the fallowing can be used to invoke the history command saved by the command line interface? (Multiple Choice)
❑ A Upper cursor key (Right Answers)
❑ 13. Left cursor key
❑ C CtrIrl? (Right Answers)
❑ D. CtrIell
Answer: AC
258.Which of the following parameters is not used by Advanced ACL?
❑ A Source interface (Right Answers)
❑ B. Destination port number.
❑ C. Protocol number.
❑ 0. Time-range.
Answer: A
259. A router functioning as a Proxy receives an ARP request packet, but finds that the destination address in the packet is not intended for itself In this case. what will the router do? (Multiple Choice)
❑ A. Discard the packet.
❑ B. Check fora route that matches the destination address (Right Answers )
❑ C. Forward its MAC address to the ARP request sender after finding that a route to the destination address is available. (Right Answers)
❑ D. Broadcast the ARP request packet.
Answer: BC
260.Refer to the graphic. IPsec VPN uses ESP to encrypt which fields?
Header ESP .tead, TCP Feeder Data ESP trader E5P Auth
Answer: A
261.According to OSI reference model, which layer is responsible for end to end error checking and flow control?
❑ A. Physical layer.
❑ B. Data link layer.
❑ C. Network layer.
❑ 0 Transport layer (Right Answers)
Answer:
262 The principle of VLSI* Based on the clastrkil IP addresses you can barrow some host ICI bits as parr of the network bits When deploying on a router. VLSM needs the routIng protocol supports it
.:A TRUE (Right Answers)
,7)13 FALSE
Answer: T
263.Refer to the configuration output. Which following statements are correct? (Multiple Choice)
[Huawei]interface GigabitEthernet0/0/1
[Huawei-GigabitEthernet0/0/1]port link-type trunk
[Huawei-GigabitEthernet0/0/11port trunk allow-pass vlan 2 to 4094
❑ A. VLAN 1 cannot pass over interface Gigabit Ethemet 0/0/1.
❑ B. VLAN 1 can pass aver interface interface Gigabit Ethernet 0/0/1. (Right Answers )
❑ C. Prior to changing the link-type to access, the command "undo pen trunk allow-pass Nan all" must be used to renew the default configurations.
❑ D. Prior to changing the link-type to access, the command "undo port trunk allow-pass Nan 2 to 4096" must be used to renew the default configurations. (Right Answers)
Answer: BD
264.Which of the following storage devices are supported by Huawei router? (Multiple Choice)
❑ A. SDRAM (Right Answers)
❑ B NVRAM (Right Answers)
❑ C Flash (Right Answers)
❑ D. Hard Disk.
Answer: ABC
265. When configuring the PPP authentication method as PAP, which of the following operations are necessary? (Multiple Choice)
❑ A. Add the user name and password of the authenticator party to the local user list. (Right Answers)
❑ B Configure the encapsulation type of the interface connected to the peer as PPP. (Right Answers)
❑ C. Configure PPP authentication method as CHAP.
❑ CI On the authenticated end. configure the user name and password that are sent to authenticator (Right Answers)
Answer: ABD
266. which of the following standards provide a transmission rate of more than 1Gbps?
❑ A. 802.11b.
❑ B. 802.119.
❑ C. 802.110.
❑ D 802 11ac (Right Answers)
Answer: D
Answer: C
268.A user can view the information for the RIP on a router. What does "Age time' in the returned result of the command mean?
❑ A. The interval of updating an RIP packet.
❑ B The aging time of an RIP route (Right Answers)
❑ C. The suppression time of an RIP route.
❑ D. The time spent on switching between RIP routes.
Answer: B
269 Which of the following methods is not used for logging in to the VRP system?
❑ A. Telnet.
❑ E 55H.
❑ C. Web.
❑ D. Netstream (Right Answers)
Answer:
270 Which of the following statements regarding the router ID in OSPF are incorrect? (Multiple Choice)
❑ A The router IDs of OSPF routers in the same area must be the same, but can be different in different areas (Right Answers)
❑ B. The router ID must be the IP address of an OSPF router interface. (Right Answers)
❑ C. The router ID must be configured manually. (Right Answers)
❑ D. A router running OSPF must have a router ID for it to operate properly.
Answer: ABC
2710n an FR network, when the h inarp command is executed, the interface where static address mapping entries have been configured sends an Inverse ARP Request packet to the remote device to replace the static address mapping
entries.
OA. TRUE
B FALSE (Right Answers)
Answer: F
272. In the case of Huawei router, the Traced command uses UDP to encapsulate probe packets.
OA. TRUE (Right Answers)
OB. FALSE
Answer: T
273 Refer to the graphic. Host A and Host B use VLAN routing to facilitate communication.
What must be configured on interface GO/0/1.1 to achieve this?
0020211 50/0/12
1001254424 1002
-.424
Inan10 014420
Gnaw.: 1001254 GREV/ef I 100.2254
Answer: D
275.A port on a switch is configured as a Trunk port. Assume that one host connects to this Trunk pan to access the network. Which of the following operations is mandatory?
❑ A Delete all the VLANs on this port in the global new.
❑ B. Delete all the VLANs on this port in the interface view.
❑ C. Disable this port and then enable it again to restore the default setting of the port.
❑ D. Configure this eon as an access port (Right Answers)
Answer:
Answer: BC
277. Which of the following descriptions regarding the TTL field of the P packet is correct?
❑ A The TTL defines how many packets the source can send.
❑ B. The TTL defines the duration during which the source can send packets.
❑ C The TTL value will decrement by 1 each time the packet is routed (Right Answers)
❑ D. The TTL value will increment by 1 each time the packet is routed.
Answer: C
278 Refer to the graphic. Two peering routers are running RIP. RTA is using RIPv2 to advertise its routes, while RTB is using RIP5I to advertise the route 1.1.1.1/32.The administrator configures "RIP version 2 multicast" for interface GO/0/1 of
RTB. How will the mute 1.1 1.1/32 appear in the the IP routing table of RTA?
ATA ATe
00/0/1 GO/0/1
10.2.12.0/24
loopeeck0 1.11.1/3.1
219 In the PPPOE &scenery Wage. the PPPoE serve, assigns a session:id to the PPP& clam in which packer?
0 A PADI
De PAD°
C PAM
I 0 PADS (Right Answers)
Answer: 0
280 Refer to the grapic, which of the following statements is true about OSPF topology and configuration?
GE0/0/0 4510
Cigabd theme:KW
(alLiBaNtetherne./0/.1.a.,,,s X0055005.0550
1.1-6iplAtEibemet0/0/01ostal network,. 020
(..g.ciallEthemettl(0/01o5of r-priorily 100
1....Ethernete/0/0jasof wrier hello 00
1.21ospf
(a1.-osp1-1.1ares 0 0 0 0
lai.ospf.Inree.00.o.almetworl, no.n.i [woo
1.21onterlaceGigsMathemet0/0/0
tea-Giga1211Pthernetf,O/opp address mai 2.z 255 zss. zsz
1,,Ziosof
-m*11a.. 0 0 0.0
I.
1.2-osd-Oliree-00.0.01netmarl, x00.1.1.200.0.0
E A_ A stable OSPF neighbor relationship can be set up between R1 and R2.
E B. After the default network type of the interface on R1 is restored to broadcast, a stable OSPF neighbor relationship can be set up between R1 and R2.
E C. After the default network type of the interface on R1 is restored to broadcast and the hello packet sending interval is changed to 10s, a stable OSPF neighbor relationship can be set up between R1 and R2 (Right Answers)
E D. Compared with R1, R2 is more likely to became the DR because the DR priority of the interface on R2 is lower than that of R1.
Answer: C
281.A network administrator uses the ping command to check for points of failure in the network. Which protocols will be used during this process? (Multiple Choice)
E A ICMP (Right Answers)
El B. TCP.
❑ C ARP (Right Answers)
El D. UDP.
Answer: AC
282. What is the default value of switch priority when STP is enabled on Huawei switch?
E A. 4096
❑ B. 8192
El C. 16384
El D. 32768 (Right Answers)
Answer: D
283 According to the following DHCP flowchart, which statements are true? (Multiple Choice)
cam. mrcesever
MCP Cescover
sue)
DFICT Rem.
ants
n A In step 1. mulhcast packets are se t.
E B. In step 2, unicast packets are sent (Right Answers)
E C. In step 3, broadcast packets are s ra. (Right Answers)
E D. In step 4, unicast packets are sent (Right Answers)
E E. In step 4, broadcast packets are sent_
284.VVhich of the following statements about static route preference on Huawei devices is false?
E A Static route preference ranges from 0 to 255 (Right Answers)
❑ B. Default static route preference is 60.
El C. Static route preference is either internal or external. Administrators can modify external preferences.
E D If static route preference is 255, the route cannot be used.
Answer: A
285.A network administrator uses the ping command to test connectivity to the destination 10.0.0.2 V' on a Huawei AR series router. Which statement regarding the output is correct?
Answer: A
286. When a source end uses application software to send an image Ile through a network, the TCP/IP encapsulation process of the Ile is: Data -,Segment Packet Frame -> Bit.
OA TRUE (Right Answers)
OB. FALSE
Answer: T
287.VVhich of following may be the reasons that cause Frame Relay PVC to work abnormally? (Multiple Choice)
❑ A. Same DLCI number is configured on the same router.
❑ B. LMI type mismatch. (Right Answers)
❑ C. Frame Relay encapsulation type mismatch. (Right Answers)
❑ D. Incorrect configuration of the DLCI number. (Right Answers)
Answer: BCD
288.In the VRP system, what are the functions of CtrI.Z? (Multiple Choice)
❑ A. Return from the system view to the user view. (Right Answers)
❑ B. Exit from the current view.
❑ C. Exit from the interface view.
❑ D. Exit from the console interface
❑ E. Return to the user view. (Right Answers)
Answer: AE
289.VVhen the tunneling mode is used to encapsulate an IPSec packet. the IP addresses of the intranet hosts are hidden to ensure the security of the entire original data packet.
OA TRUE (Right Answers)
OB. FALSE
Answer: T
290,In SW, the priority of the SW root switch ranges from 0 to 65536.
0 A. TRUE
OB FALSE (Right Answers)
Answer: F
291.The Eth-Trunk frame forwarding mechanism used to prevent changes in the data sequence forwards frames based on which of the following parameters? (Multiple Choice)
❑ A The same source or destination IP address (Right Answers)
❑ B The same source or destination MAC address (Right Answers)
❑ C. The same protocol type.
❑ D The same source or destination port number.
Answer: AB
292.0SPF allows for "multiple" processes. By default,OSPF selects a process whose number is 0_
❑ A. 0
❑ B.1 (Right Answers)
❑ C. 10
❑ D. 100
Answer: B
1 An sehministrefor wishes to menage the router in the remote branch office, which method can be used?
❑ A Telnel (Right Answers)
❑ B FSP
❑ C. Console Connection
❑ 0 DIICP
Answer: A