Professional Documents
Culture Documents
Cartographic Map Production
Cartographic Map Production
Introduction
Maps are by definition a generalized representation of real-world geography.
Cartographers or technicians who make maps, use symbols to represent real-world features; such as
During the map making process, information is usually generalized in order to make maps clearer
and easier to understand.
For example, the mapmaker might choose to show only those cities with populations greater than
25,000 rather than cluttering up a map with every settlement with a population count recorded in the
census database.
Modern day computer-assisted cartography is faster and more efficient than traditional cartography.
Current geographic information systems (GIS) and computer-aided design (CAD) applications allow
for the rapid development of many map products and an effective means of communicating results.
The importance of quality and suitability of the datasets used for the job cannot be over emphasised.
.
For maps to be effective they need to convey relevant information to the expected audience.
Managers need to ensure that mechanisms are in place as part of quality assurance procedures to
ensure that map production fulfils relevant compliance criteria.
In this respect, checklists identifying minimum requirements for internal and external map
production are a useful method of facilitating quality control.
Printing large map products (e.g. A0-size) is often time consuming hence sufficient time needs to be
allowed when preparing such products.
Managers should also ensure that stocks of standard products are maintained to service day-to-day
requests.
1
Most atlases are considered general reference maps and typically contain numerous features, none of
which pre-dominate.
Reference maps are generally rich in detail and take longer to produce than other maps.
Thematic maps are at the other end of the spectrum of cartographic products. They generally
emphasise one or two map features relative to other background items.
A map showing land-use zoning is an example of a thematic map. Zoning is highlighted over any
other map feature.
Thematic maps are generally easier and faster to produce than a good general reference map.
Maps can be classified anywhere in the range between reference and thematic maps. E.g. a road map
may be rich in detail thus resembling a reference map, but the highways tend to be more
predominantly displayed, making it more of a thematic map.
Map elements
For all maps the following elements form the basis of a ‘good’ map:
Descriptive title.
The map content, including symbolisation of geographic features.
Legend that explains the geographic symbols.
Map scale.
Map projection.
North arrow (or compass).
Copyright, source and publisher statements.
Descriptive title
A descriptive title is a short description about the purpose of the map. E.g. a map showing state
population change between 1980 and 2000 by a graduated change in levels of grey may be given a
quick non-informative title as State Population.
The title provides the user with very little information about the map.
A more appropriate title would be State Population Growth: 1980–2000. This title, although an
improvement on the first, is still potentially incorrect as the title implies an increase in population
not a decrease.
Some local government areas may have decreased in population. Possibly the best title would be
State Population Change: 1980–2000. This title conveys a lot of information in a short phrase and
does not mislead the map user.
Map legend
The map legend clearly explains the symbols used to represent geographic features on the map. A
legend does not necessarily need to include every symbol used in the map. For example, most map
readers understand that wavy blue lines represent a river. The major symbols or themes however
should always be prominent in the legend.
Map scale
Maps present a view of geography that is smaller than the real world, and as such it is necessary to
note the scale of the map on the final map product. Scale can be shown as a unit measure (e.g. 1:50
000) or as a graphic scale bar.
Maps of a scale of 1:50 000 and larger are considered large-scale maps, whereas maps of a scale of
1:500 000 or smaller are classed as small-scale maps. Large-scale maps generally show more
geographic detail than small-scale maps.
Map projection
Map projections allow the cartographer to represent a portion of the 3-D curved surface of the Earth
on a flat (or 2-D) piece of paper. A map projection is either set in the geographic data when it is
created (and should be noted in the metadata), or it can be added or modified within most spatial
information system applications. The most popular projection used in Kenya is the UTM
North arrow
Most spatial information system and mapping applications enable a north arrow to be included on
the map document. Depending on the map’s extent and projection, the geographic north may be
directly at the top of a page or slightly to the right or left of the top.
Audience
Most spatial information system and other mapping applications can produce a wide variety of map
products, from simple letter-sized maps to large wall maps printed on A0 plotters. It is important to
consider and understand the intended requirements of the primary audience when producing a map
product.
3
Data sources
It is widely acknowledged that approximately 90% of the time invested in a typical spatial
information project involves the capturing or building of the geographic data.
When the time arrives to compile the data and produce a map it is critical that the map maker
understands the following data.
Projection used
The scale at which the map is to be produced
Date of data collection
How the data was collected
If the map is saved, where is it on the local government network
This information should be available from the metadata associated with each data theme and
emphasises the importance of producing and maintaining metadata.
Composition tools
Most spatial information system and mapping applications have a range of composition tools that are
available for making maps. A good understanding of them is required in order to produce a
streamlined and efficient map production system. For example, within the mapping software there
are various templates for constructing a legend in the layout document such as:-
Using the Legend Frame Tool
Using the Custom Legend Extension.
The use of templates is useful when making a series of maps which require a consistent format. Most
GIS software support templates, and once created can save considerable time and effort leading to
improved overall efficiency and effectiveness.
Design process
Producing a map that is simple, clear, uncomplicated and pleasing to the eye requires planning, and
above all it has to convey the information in the correct manner.
When a user requests for a map to assist in decision making, it is important that the map reflects
what the user wants to see. For example, if the issue is to display council ward boundaries and town
planning scheme zones, the first thing the user should note when viewing the map are the zones and
ward boundaries, and then any other information.
Note: when viewed from a cartographic perspective, it is important that GIS people are aware of the
basic elements of graphic design as well as where and how to apply them.
4
(i) Legibility
Map symbols must be legible to the reader. Lines representing roads need to be clearly differentiated
from lines representing rivers. Circular points symbolising settlements must be clearly different from
points symbolising traffic monitoring locations. Map feature labels, should be easily read by the map
user within the context that the map is designed for.
The role of the mapmaker is to ensure the reader’s eye is drawn to the features that define the map’s
purpose, and is not confused with other less important information.
When carried out correctly, a typical layering hierarchy will involve raster data (e.g. satellite image
or digital elevation grid) on the bottom layer, polygon layers above this, then line and point themes
on the top.
Ordering can also occur within a single theme or layer. For example, with road classifications
different line widths and styles can be assigned to represent local roads, state roads or international
highways. In this situation, the ability to illustrate such features is dependent on the data source (i.e.
the road dataset must have attribute coding that differentiates road type).
5
Map production checklist
The following check list serves as a useful template for the production of maps in most project type
activities.
Title: A descriptive name of the map.
Publisher: The name of the publisher, place of publication and date of publication.
Copyright: A statement indicating who holds copyright for the map and the year of publication.
Acknowledgment and source: The origin and nature of the information shown on the map,
including derived or interpreted data. The statement should also indicate the currency of the data.
Scale: A scale bar with optional representative fraction in the form of “Scale 1: xxx xxx”.
Legend: Clearly depict colouring and display characteristics for the information shown on the
map. The legend should display symbols or coloured boxes with a brief description of each.
Colours and shading In general for large areas on the map use light colours. For small areas use
dark colours. Ensure that readers of the map are able to easily distinguish between colours on the
map.
The main principle to follow when choosing colour ramps (scale) to represent increasing or
decreasing values is to use colours of increasing intensity or darkness. Do not use a red colour
ramp.
Symbols: Use established simple and clear symbols wherever possible. Symbols which create a
mental image of the object or concept represented are preferred. Symbols portraying related
objects or concepts should have common characteristics.
Font: The number of different fonts and font sizes used should be kept to a minimum. Fonts that
are sans (without) serifs, such as Arial, Univers, Triumvirate or Helvetica are recommended,
particularly for web products.
Projection and datum: Users need to compare areas, distances and angular relationships
For Universal Transverse Mercator Conformal Projection, the parameters used when creating a
map of Kenya should be set to:
Map units: metres
Projection: UTM Albers Equal-Area Conic
Spheroid: Arc 1960 (Clarke 1880) or WGS84
Central Meridian of 33 degrees East (Zone 36) or 39 degrees East (Zone 37)
North arrow: Only show if the clear delineation of north will be advantageous. If a graticule is
used then a north arrow is redundant. Do not use a north arrow for small-scale maps with
projections in Albers Equal-Area Conic or Lambert Conformal Conic as north varies across the
map.