Professional Documents
Culture Documents
Brochure Off Grid Back Up and Island Systems en Web
Brochure Off Grid Back Up and Island Systems en Web
INDEX
EasySolar 12V and 24V 4
Introduction6
Application examples 7
Nuarro Lodge: Sustainable and responsible tourism in Mozambique 8
VIMTEC – Video.Monitoring.Technology 10
Eole Water: Making water from air with Victron Energy 12
DC systems 16
AC systems 19
Adding more renewable energy sources 22
Accessories23
Tools24
More power 26
Technical information 29
About Victron Energy 98
3
EasySolar 12V and 24V
charger
failure
AC Out, Always active (3)
EasySolar 12|1600|70
MPPT 100|50
charger
failure
mains
4
Energy. Anytime. Anywhere.
Solar panel
Battery + Battery -
3 x Solar -
3 x Solar +
Data
4 x AC Output
AC input
Easy Solar
MCB MCB
AC in AC out 0 (break)
MCB
RCD
MCB
MPPT MCB
Solar +
AC out 3 (No break)
Solar -
Battery
5
Introduction
6
Energy. Anytime. Anywhere.
Application examples
Our products are being used in all off-grid and grid-connected systems, for example autonomous buildings, oil platforms and
private houses.
Eole Water
7
Nuarro Lodge: Sustainable and responsible tourism in Mozambique
Nuarro Lodge
Located on the shores of the warm and azure Indian Ocean In the words of the company, working in and being considerate
in northern Mozambique, lies the remotely, but specifically of such an area is all about friendly people, top-class activities
chosen Nuarro Lodge. Backed by the wild Mozambican bush, and fantastic food, whilst showcasing a spectacular, pristine
fringed with old and established baobab trees to the back; environment in the most responsible way possible.
and fronted by the calm and aquamarine bay of Nanatha, the
lodge is peppered along a more than 2 km-long, powdery- Even though it is off-grid and remote, Nuarro generates its
white beach in the middle. own electricity and clean water using renewable energy
which helps bring sustainable tourism to the area without
Behind the scenes, powering the Nuarro Lodge lighting, is compromising the basic needs and comforts of guests. This
a newly upgraded Victron Energy hybrid-30kVA, 3-phase ensures the local people and community benefit also, by
system with 38kWp of solar power. The Lodge though is but bringing work to the surrounding area.
one part of the Nuarro project that Victron Energy and their
partner companies are involved with. Upgrading Nuarro Lodge’s energy systems
Building of the lodge started in 2007 and the owners of the
Pristine, off-grid and remote lodge have over the years upgraded the renewable energy
Nuarro is built from natural materials (by the local community) and water system to fit the needs of the guests, community
in an 800 hectare (8 sq km) environmentally sensitive and employees. The best choice for this is a hybrid-system for
concession area of the Baixo da Pinda peninsula. the reliable generation of electricity with the lowest carbon
footprint, with hot water being supplied by solar geysers
directly to the buildings.
During the recent upgrades Nuarro’s owners decided to install
a new inverter and solar charge system. Reliability and remote
monitoring have been missing for years and the decision was
therefore made to invest in Victron Energy products for their
known reliability in off-grid applications in harsh and remote
environments.
8
Energy. Anytime. Anywhere.
The entire lodge can run from solar including the borehole
pump, water treatment plant, the diving compressor, the
cold and freezer rooms, fridges and other restaurant and bar
equipment. During the night the load is minimised by using
timers switching off non-essentials to minimise the use of
energy from the battery bank during the night.
3 x 48/10000/140 Quattro
Main DC busbar
Load
Generator 40kVA L1 L2 L3
230/400-3p
230/400-3p
Bypass switch
VE BUS Color Control GX
48Vdc/2400Ah VE CAN
2 sets OpzS 24x 1200Ah (c20)
BMV702
BMV-602
battery monitor
VE Direct
SETUP SELECT
+
color control
-
9
VIMTEC – Video.Monitoring.Technology
VIMTEC – Video.Monitoring.Technology
GEMTEC GmbH, a customer of Service Team Döbeln, is a At the heart of the unit, within the tamper proof body which
mid-sized, family-owned firm specializing in security and incorporates its own system security, is a pneumatic mast that
communication systems. Over the years this company has can extend up to 15 m in height with 360 degree cameras and
grown steadily to become one of the largest providers of lighting on the masthead.
security equipment in Saxony.
A range of surveillance fitment options exists which can
In its quest for new solutions, GEMTEC has devised a totally include thermal imaging, IR lighting, motion detection,
new product which uses Victron Energy products supplied by access control, perimeter surveillance and alarm verification
Service Team Döbeln. This product is called the VIMTEC MBE, from a distance. The units can also allow verbal contact
which is a mobile and autonomous surveillance unit. This via loudspeaker along with video recording, management
highly versatile system is designed to monitor construction systems and image analysis software. The commissioning of
sites, large events, traffic, and much more besides. the specific detection and evaluation techniques can even be
carried out remotely.
Hybrid autonomy with Victron Energy
Standalone power for the VIMTEC MBE is provided by a hybrid Assisting this level of sophistication and to make this all
system consisting of a diesel generator with Victron Energy possible are Victron Energy gel batteries, a MultiPlus, BMV-
battery storage. This enables the unit to operate in isolation 702 battery monitoring along with the offsite remote control
for up to 120 days in areas where no currently installed and monitoring made possible by a Color Control GX and the
surveillance infrastructure exists. Victron Energy VRM portal.
10
Energy. Anytime. Anywhere.
VE BUS
color control
AC distribution
24Vdc distribution
Generator BMV700
Battery monitor
BMV-602
battery monitor
Orion
DcDc converter
VE Direct
SETUP SELECT 12Vdc distribution
+
DCDC converter
Orion -TR 24/12-10
-
Input Output
GEL
12-200
GEL
12-200
Battery 24Vdc
11
Eole Water: Making water from air with Victron Energy
12
Energy. Anytime. Anywhere.
Quattro
AC distribution
Quattro
5 1 20
color control
BMV-602
battery monitor
SETUP SELECT
+
-
Lithium Lithium
12,8V-200Ah 12,8V-200Ah
LiFePo 4 LiFePo 4
Lithium batteries
13
1414
Energy. Anytime. Anywhere.
15 15
DC systems
DC Systems
In DC systems solar energy is converted into regulated DC. Consequently the regulated DC is fed to the batteries and
consumers. An inverter powers any AC consumers that are connected to the DC system. Unlike in DC systems, solar power is
directly converted into AC in AC systems.
MPPT 75 | 15
CE
Green LED : on Power
12/24 | 15A
20A DC OUT
: blinking Batterylife
BATT PV LOAD
Batteries
1. DC consumers
A solar panel feeds the consumers practically directly. The only item in between the panel and the power consumer is a charge
controller. This BlueSolar Charge Controller controls the voltages for the consumers and the batteries.
16
Energy. Anytime. Anywhere.
MPPT 75 | 15
AC OUT
12/24 | 15A
CE
Inverter
20A
Green LED : on Power
: blinking Batterylife
BATT PV LOAD
Lithium
12,8V-90Ah
AC OUT
Generator
MultiPlus
Batteries
17
DC systems
It is therefore no longer necessary to size a generator on the maximum peak load. Use the most efficient size generator instead.
Note: this feature is available in both the MultiPlus and the Quattro.
Quattro
AC IN 1 MAIN AC OUT
Grid
Quattro
5 1 20
AC IN 2 AUX. AC OUT
Generator
BlueSolar charge
Solar Panels
controller MPPT 150/70
victron energy
B L U E P O W E R
LITHIUM BATTERY
24V / 180Ah
4. Back-up system
Solar energy can also be combined with a grid connection. But a grid that suffers from power failures in combination with an
insufficient solar supply requires support of a generator. Instead of a MultiPlus, we recommend the Quattro, which is a MultiPlus
with built-in transfer switch to connect both the grid and a generator. This entirely automates the switching process between
the grid and the generator.
18
Energy. Anytime. Anywhere.
AC systems
AC Systems
For larger solar systems that generally supply to AC consumers, it is more efficient to immediately invert the solar power into AC.
Therefore we call these systems “AC systems”. AC systems have a higher energy efficiency in comparison to DC systems. The
PV inverter directly converts the solar energy into AC. This inverter requires ‘grid’, which is provided for by a MultiPlus
or Quattro. All excess solar power which isn’t used by the AC consumers is used to charge the batteries.
Solar Panels
MultiPlus
Grid Inverter
PV inverter
AC OUT
Generator
Batteries
19
AC systems
Solar Panels
MultiPlus
Grid Inverter
PV inverter
AC OUT
AC IN 1
Grid
Batteries
20
Energy. Anytime. Anywhere.
AC systems
MultiPlus vs Quattro
The MultiPlus and Quattro products play a central role in both AC
and DC systems. They are both powerful battery chargers and
inverters in one box.
The big difference is that a Quattro can take two AC sources, and
switch between them based on intelligent rules. It has a built-in
transfer switch. The MultiPlus can take only one AC source.
Solar Panels
Grid Inverter
Quattro
PV inverter
MAIN AC OUT
AC IN 1
Grid Quattro
5 1 20
AUX. AC OUT
AC IN 2
Generator
Batteries
21
Adding more renewable energy sources
Wind regulator
Wind turbine
MPPT 75 | 15
CE
Green LED : on Power
: blinking Batterylife
12/24 | 15A
20A
Inverter AC OUT
Yellow LED : blinking fast Bulk
: blinking slow Absorbtion
: on Float
BATT PV LOAD
Lithium
12,8V-90Ah
Example showing how to add other renewable energy sources via the DC.
22
Energy. Anytime. Anywhere.
Accessories
Our systems are comprised of various components. Some of which are specifically designed for specific markets. Other
Victron components are applicable to a wide range of applications. You are able to find the specifications and other detailed
information about these components in the ‘Technical Information’ section.
Color Control GX
The Color Control GX provides intuitive control and monitoring
for all products connected to it. The list of Victron products that
can be connected is endless: Inverters, Multis, Quattros, MPPT
150/70, BMV-600 series, BMV-700 series, Skylla-i, Lynx Ion and
even more.
The Color Control GX is now also equipped with a generator start/
stop function using the internal relay.
Besides monitoring and controlling products on the Color
Control GX, the information is also forwarded to our free remote
monitoring website: the VRM Online Portal.
The dongle is able to read data from the BMV-70x series battery
monitors, Phoenix Inverters with VE.Direct port, MPPT Solar
Charge Controllers (except for the 150/70 and 150/85) using the
VE.Direct communication port and the Blue Smart IP65 Charger.
MPPT Control
The MPPT Control lets you see the status as well as setup
all BlueSolar MPPT Charge Controllers that have a VE.Direct
communications port. The new MPPT Control is mounted in
the familiar BMV-700 series housing, maintaining a consistent
and professional look to your panels and systems monitoring
equipment.
Battery Monitor
Key tasks of the Victron Battery Monitor are measuring charge
and discharge currents as well as calculating the state-of-charge
and time-to-go of a battery. An alarm is sent when certain limits
are exceeded (such as an excessive discharge). It is also possible
for the battery monitor to exchange data with the Victron Global
Remote. This includes sending alarms.
23
Tools
We have a couple of tools available that make it easy for Victron distributors, installers and customers to work with Victron
Energy products. Whether you want to configure and read out your Victron products with VictronConnect using your
smartphone, tablet or computer or you want to show your VRM site to friends and family, it is all possible with these Victron tools.
VictronConnect
VictronConnect lets you get live status info and configure Victron
products with built-in bluetooth support, such as the SmartSolar
and the Blue Smart IP65 Charger, or using a VE.Direct Bluetooth
Smart dongle or VE.Direct USB interface. Firmware updates are
included inside VictronConnect.
VictronConnect is available for both Windows PCs, Max OS X, iOS
and Android phones as well as tablets.
Download VictronConnect from our software page:
https://www.victronenergy.com/support-and-downloads/
software#victronconnect-app
Victron Professional
Victron Professional is a new online portal, available to both
distributors as well as other professionals and end users that work
with Victron equipment.
With Victron Professional you can get insight into training
sessions, videos, firmware files, APIs and the latest news. If you
already use E-Order you can login with those credentials.
24
Energy. Anytime. Anywhere.
https://www.youtube.com/user/VictronEnergyBV
Victron Live
Victron Live is a living and growing website, which is a constantly
evolving information store. It is a place where you can find
manuals for VEConfigure3, Assistants and other software and
software products.
25
More power
The AC and DC systems which are shown in this brochure are examples of the various possibilities that Victron Energy offers. As
illustrated they vary from very simple to very extensive solutions. Our products can be put in parallel, or in three-phase
configurations, if the necessary power is too high for a single unit.
Easy to configure
Configuring parallel and
three phase systems is easy.
Our VEConfigure software
MultiPlus inverter/chargers tool allows the installer to
put components together,
without any hardware
changes or DIP switches. Just
using standard products.
AC OUT
Generator
BMV-602
battery monitor
+
SELECT
Battery Monitor
controller -
MPPT 150/70
OpzS OpzS OpzS OpzS OpzS OpzS
Batteries
1. DC system
The illustration above shows a DC system with three charge controllers, two MultiPlus inverter/chargers configured in parallel
and one generator.
26
Energy. Anytime. Anywhere.
Solar Panels
3 x PV inverters
AC IN 1
MAIN AC OUT
Grid
AUX. AC OUT
AC IN 2
Generator
BMV-602
battery monitor
SETUP
+
-
SELECT
Battery monitor
Batteries
2. AC system
The illustration above shows an AC system with three PV inverters and two Quattros in parallel.
27
2828
Energy. Anytime. Anywhere.
TECHNICAL INFORMATION
EasySolar 12V and 24V, 1600VA 30
EasySolar 24V and 48V, 3000VA 32
ECOmulti35
Phoenix inverters 250VA - 500VA 230V 38
Phoenix inverters 180VA - 1200VA - 5000VA 230V 40
MultiPlus inverter/charger 800VA- 5kVA 230V 42
Quattro inverter/charger 3kVA - 15kVA 230V 44
MultiPlus inverter/charger 2kVA and 3kVA 120V 46
Quattro inverter/charger 3kVA - 5kVA 120V 48
Blue Smart IP65 Charger 51
Blue Power IP65 Charger 55
Skylla-i battery charger 24V 58
Skylla charger 24/48V 60
Skylla TG charger 24V 90-265V GL approved 62
Color Control GX 64
BMV 700 series: Precision battery monitoring 68
BlueSolar monocrystalline panels 72
BlueSolar polycristalline panels 73
BlueSolar charge controller MPPT 75/10, 75/15 & MPPT 100/15 74
BlueSolar charge controller MPPT 100/30 75
BlueSolar charge controller MPPT 100/50 76
BlueSolar charge controller MPPT 150/35 77
BlueSolar charge controller MPPT 150/45 up to 150/100 78
BlueSolar charge controller MPPT 150/70 & MPPT 150/85 79
BlueSolar PWM-Light charge controllers 80
BlueSolar PWM-Pro charge controllers 81
Battery Balancer 84
Telecom batteries 86
OPzS Solar batteries 87
Gel and AGM batteries 88
12,8 Volt lithium iron phosphate batteries 92
VE.Bus BMS 94
24V 180Ah Lithium-ion battery and Lynx-ion 96
2929
EasySolar 12V and 24V, 1600VA
www.victronenergy.com
The all-in-one
EasySolar solar
12V and power
24V, solution
1600VA
z
All-in-one solar power solution
The EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution
in one enclosure.
The product is easy to install, with a minimum of wiring.
AC distribution
The AC distribution consists of a RCD (30 mA/16 A) and four AC outputs protected by two 10A
and two 16A circuit breakers.
One 16A output is controlled by the AC input: it will switch on only when AC is available.
PowerAssist
Unique PowerAssist technology protects the utility or generator supply from being overloaded
by adding extra inverter power when needed.
VE.Direct
MPPT 100|50
30
Energy. Anytime. Anywhere.
31
EasySolar 24V and 48V, 3000VA
www.victronenergy.com
The all-in-one
EasySolar solar
24V and power
48V, solution
3000VA
Two solar charge controllers: 2x Blue Solar MPPT 100/50, 0r 2x Blue Solar MPPT 150/35
Up to six strings of PV panels can be connected to six sets of MC4 (PV-ST01) PV connectors.
PowerAssist
Unique PowerAssist technology protects the utility or generator supply from being overloaded by
adding extra inverter power when needed.
32
Energy. Anytime. Anywhere.
33
BIDERECTIONAL CONVERTER
In case of overload the ECOmulti
GridAssist function
will import power from the grid to prevent system shutdown.
Maximum AC current feed-through 50 A
AC voltage 230 V 50 Hz single phase
Cont. output power at 25°C 3000 VA
Cont. output power at 25°C 2500 W
Cont. output power at 40°C 2200 W
Peak power 6000 W
Maximum efficiency 94%
Power factor range (when connected to the grid) 0,7 inductive to 0,7 capacitive (programmable)
Zero load power (W) 15 W
10 W
Zero load power in AES mode (island mode operation with AC output lowered
to 200 V when load < 50 Watt)
www.victronenergy.com
34
Energy. Anytime. Anywhere.
ECOmulti
simple wall mounted energy storage solution
Nighttime
During the night the ECOmulti is disconnected from the grid. The home is powered by energy stored in
the battery. The ECOmulti will reconnect the grid when the battery is discharged.
Battery charging
The next day, when the PV array produces sufficient power to supply the loads and to start charging the
battery, the ECOmulti will regulate charge current to absorb nearly 100% of the surplus PV power.
UPS function
When the grid fails, the ECOmulti will continue to power the home.
35
ECOmulti
A simple wall mounted energy storage solution
100%
Sizing the PV array State of charge
Sufficient energy must be
75%
harvested to recharge the
battery and to power the
home, even on a reasonably 50%
Increasing storage capacity The average household with two children would fully utilize a 4,6 kWh Li-ion battery; one addi-
More battery storage tional battery module.
capacity will reduce feedback
into the grid and increase self
sufficiency, especially during
the summer season. Winter Spring Summer Autumn
To increase self sufficiency 100%
during wintertime both the
battery and the PV array have
to be enlarged.
50%
10%
100%
10
kWh
Solar yield
9
8
50%
7
6
5
4
PV Production 10%
3
2 Self-consumption
1 Self sufficiency
0
mon tue wed thur fri sat sun
13-05 14-05 15-05 16-05 17-05 18-05 19-05 Typical seasonal variations at roughly 50 degrees latitude ~ Seattle, London, Amsterdam, Berlin,
To Grid München ~ with battery and without battery.
To Battery
Direct use
Two person energy conscious household Four person energy conscious household
Consumption: 2500 kWh per year Consumption: 4500 kWh per year
PV array: 2,5 kWp PV array: 5 kWp
Battery: 2,3 kWh Li-ion Battery: 4,6 kWh Li-ion
36
Energy. Anytime. Anywhere.
www.victronenergy.com
Extremely flexible
- Energy storage can be increased by adding battery modules.
- AC power can be increased by paralleling ECOmulti modules.
- Three ECOmulti modules can be configured for three-phase
operation.
- Two ECOmulti modules can be configured for split phase operation.
More self-consumption, more independence
With 2,3 kWh Li-ion storage capacity and a 3 kVA bidirectional inverter, the ECOmulti reduces dependence on power
from the grid.
The growing interest in self-consumption is driven by increasing retail electricity prices and simultaneously
decreasing feed in tariffs. Feed in tariffs are decreasing a. o. because it becomes increasingly difficult, and
expensive, to ensure stability of the grid as more solar and wind power comes on line. Simultaneously, the retail price
of electricity is increasing, to cover these same costs plus the cost to keep conventional power plants in hot standby
to back-up renewable power generation in case the sun is not shining and/or the wind is not blowing.
The ECOmulti meets the German interconnection standard VDE-AR-N 4105 and the Incentive Program for Solar Energy Storage
Systems Marktanreizprogramm für Batteriespeicher.
With Intelligent Battery and Load Management the ECOmulti can limit power export to the grid to at most 60% of the installed Wp
capacity; KfW-Programm Erneuerbare Energien “Speicher”.
According to the Fraunhofer-Institut für Solare Energiesysteme (ISE), a household that consumes 4500 kWh per year can reduce
energy import from the grid by 60% when installing a 5 kWp solar array combined with 4 kWh usable energy storage.
Inverter 1
1
EcoMulti
2
2
Generation
Consumption
Feed-in supply
37
Phoenix Inverters
Phoenix inverters 250VA - 500VA 230V www.victronenergy.com
250 VA – 500 VA 230 V
ECO mode
When in ECO mode, the inverter will switch to standby when the load decreases below a preset
value. Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5
seconds). If the load exceeds a preset level, the inverter will remain on.
Remote on/off
A remote on/off switch can be connected to a two pole connector, or between battery plus and the
left hand contact of the two pole connector.
LED diagnosis
Please see manual for a description.
Screw terminals
No special tools needed for installation
38
Energy. Anytime. Anywhere.
Computer interface
All models have a RS-485 port. All you need to connect to your PC is our MK2 interface (see under accessories).
This interface takes care of galvanic isolation between the inverter and the computer, and converts from RS-485
to RS-232. A RS-232 to USB conversion cable is also available. Together with our VEConfigure software, which
can be downloaded free of charge from our website, all parameters of the inverters can be customized. This
includes output voltage and frequency, over and under voltage settings and programming the relay. This relay
can for example be used to signal several alarm conditions, or to start a generator. The inverters can also be
connected to VENet, the new power control network of Victron Energy, or to other computerized monitoring
and control systems.
40
Energy. Anytime. Anywhere.
Phoenix Inverter Control Computer controlled operation and monitoring BMV-700 Battery Monitor
This panel can also be used on a Several interfaces are available: The BMV-700 Battery Monitor features an
MultiPlus Inverter/Charger when an - MK2.2 VE.Bus to RS232 converter advanced microprocessor control system
automatic transfer switch but no charger Connects to the RS232 port of a computer (see ‘A guide to VEConfigure’) combined with high resolution
function is desired. - MK2-USB VE.Bus to USB converter measuring systems for battery voltage
The brightness of the LEDs is Connects to a USB port (see ‘A guide to VEConfigure’) and charge/discharge current. Besides
automatically reduced during night time. - VE.Net to VE.Bus converter this, the software includes complex
Interface to VE.Net (see VE.Net documentation) calculation algorithms, like Peukert’s
- VE.Bus to NMEA 2000 converter formula, to exactly determine the state of
- Victron Global Remote charge of the battery. The BMV-700
The Global Remote is a modem which sends alarms, warnings and system selectively displays battery voltage,
status reports to cellular phones via text messages (SMS). It can also log current, consumed Ah or time to go. The
data from Victron Battery Monitors, Multis, Quattros and Inverters to a monitor also stores a host of data
website through a GPRS connection. Access to this website is free of charge. regarding performance and use of the
- Victron Ethernet Remote battery.
To connect to Ethernet.
- Color Control panel Several models available (see battery
Behind the color LCD a Linux microcomputer runs open source software. The Color monitor documentation).
Control (CCGX) provides intuitive control and monitoring for all products connected
to it. The list of Victron products that can be connected is endless: Inverters, Multis,
Quattros, all our latest MPPT solar chargers, BMV-700, BMV-600, Lynx Ion + Shunt
and more. The information can also be forwarded to our free remote monitoring
website: the VRM Online Portal.
Two AC Outputs
The main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the
event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than
20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.
The second output is live only when AC is available on one of the inputs of the MultiPlus. Loads that should not
discharge the battery, like a water heater for example can be connected to this output (second output available
on models rated at 3 kVA and more).
Virtually unlimited power thanks to parallel operation
Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will
provide 25 kW / 30 kVA output power with 720 Amps charging capacity.
Three phase capability
In addition to parallel connection, three units of the same model can be configured for three phase output. But
that’s not all: up to 6 sets of three units can be parallel connected for a huge 75 kW / 90 kVA inverter and more
than 2000 Amps charging capacity.
PowerControl - Dealing with limited generator, shore side or grid power
MultiPlus The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore
24/3000/70 side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore
current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging,
thus preventing the generator or shore supply from being overloaded.
PowerAssist - Boosting the capacity of shore or generator power
This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the
capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus
will make sure that insufficient shore or generator power is immediately compensated for by power from the
battery. When the load reduces, the spare power is used to recharge the battery.
Solar energy: AC power available even during a grid failure
The Quattro can be used in off grid as well as grid connected PV and other alternative energy systems.
Loss of mains detection software is available.
System configuring
- In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes
with a DIP switch setting procedure.
- Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System
Configurator software.
- Off grid, grid interactive and self-consumption applications, involving grid-tie inverters and/or MPPT Solar
Chargers can be configured with Assistants (dedicated software for specific applications).
On-site Monitoring and control
Several options are available: Battery Monitor, Multi Control Panel, Ve.Net Blue Power Panel, Color Control
MultiPlus Compact
Panel, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232).
12/2000/80
Remote Monitoring and control
Victron Ethernet Remote, Victron Global Remote and the Color Control Panel.
Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge.
Remote configuring
When connected to the Ethernet, systems with a Color Control panel can be accessed and settings can be
changed.
42
Energy. Anytime. Anywhere.
Digital Multi Control Panel Computer controlled operation and monitoring BMV-700 Battery Monitor
A convenient and low cost solution for Several interfaces are available: The BMV-700 Battery Monitor features
remote monitoring, with a rotary knob to - MK2.2 VE.Bus to RS232 converter an advanced microprocessor control
set PowerControl and PowerAssist levels. Connects to the RS232 port of a computer (see ‘A guide to VEConfigure’) system combined with high resolution
- MK2-USB VE.Bus to USB converter measuring systems for battery voltage
Connects to a USB port (see ‘A guide to VEConfigure’) and charge/discharge current. Besides
- VE.Net to VE.Bus converter this, the software includes complex
Interface to VE.Net (see VE.Net documentation) calculation algorithms, like Peukert’s
- VE.Bus to NMEA 2000 converter formula, to exactly determine the state
- Victron Global Remote of charge of the battery. The BMV-700
The Global Remote is a modem which sends alarms, warnings and system status reports to cellular phones selectively displays battery voltage,
via text messages (SMS). It can also log data from Victron Battery Monitors, Multis, Quattros and Inverters current, consumed Ah or time to go.
to a website through a GPRS connection. Access to this website is free of charge. The monitor also stores a host of data
- Victron Ethernet Remote regarding performance and use of the
To connect to the Ethernet. battery.
- Color Control panel (see picture on page 1) Several models available (see battery
Blue Power Panel Behind the color LCD a Linux microcomputer runs open source software. monitor documentation).
Connects to a Multi or Quattro and all The Color Control (CCGX) provides intuitive control and monitoring for all products connected to
VE.Net devices, in particular the VE.Net it. The list of Victron products that can be connected is endless: Inverters, Multis, Quattros, all our
Battery Controller. latest MPPT Solar Chargers, BMV-700, BMV-600, Lynx Ion + Shunt and more. The information can
Graphic display of currents and voltages. also be forwarded to our free remote monitoring website: the VRM Online Portal.
44
Energy. Anytime. Anywhere.
12/3000/120-50/50 12/5000/220-100/100
Quattro 24/3000/70-50/50 24/5000/120-100/100 24/8000/200-100/100
48/5000/70-100/100 48/8000/110-100/100 48/10000/140-100/100 48/15000/210-100/100
PowerControl / PowerAssist Yes
Integrated Transfer switch Yes
AC inputs (2x) Input voltage range: 187-265 VAC Input frequency: 45 – 65 Hz Power factor: 1
Maximum feed through current (A) 2x 50 2x100 2x100 2x100 2x100
INVERTER
Input voltage range (V DC) 9,5 – 17V 19 – 33V 38 – 66V
Output (1) Output voltage: 230 VAC ± 2% Frequency: 50 Hz ± 0,1%
Cont. output power at 25°C (VA) (3) 3000 5000 8000 10000 15000
Cont. output power at 25°C (W) 2400 4000 6500 8000 12000
Cont. output power at 40°C (W) 2200 3700 5500 6500 10000
Cont. output power at 65°C (W) 1700 3000 3600 4500 7000
Peak power (W) 6000 10000 16000 20000 25000
Maximum efficiency (%) 93 / 94 94 / 94 / 95 94 / 96 96 96
Zero load power (W) 20 / 20 30 / 30 / 35 45 / 50 55 80
Zero load power in AES mode (W) 15 / 15 20 / 25 / 30 30 / 30 35 50
Zero load power in Search mode (W) 8 / 10 10 / 10 / 15 10 / 20 20 30
CHARGER
Charge voltage 'absorption' (V DC) 14,4 / 28,8 14,4 / 28,8 / 57,6 28,8 / 57,6 57,6 57,6
Charge voltage 'float' (V DC) 13,8 / 27,6 13,8 / 27,6 / 55,2 27,6 / 55,2 55,2 55,2
Storage mode (V DC) 13,2 / 26,4 13,2 / 26,4 / 52,8 26,4 / 52,8 52,8 52,8
Charge current house battery (A) (4) 120 / 70 220 / 120 / 70 200 / 110 140 210
Charge current starter battery (A) 4 (12V and 24V models only)
Battery temperature sensor Yes
GENERAL
Auxiliary output (A) (5) 25 50 50 50 50
Programmable relay (6) 3x 3x 3x 3x 3x
Protection (2) a-g
VE.Bus communication port For parallel and three phase operation, remote monitoring and system integration
General purpose com. port 2x 2x 2x 2x 2x
Remote on-off Yes
Common Characteristics Operating temp.: -40 to +65˚C Humidity (non-condensing): max. 95%
ENCLOSURE
Common Characteristics Material & Colour: aluminium (blue RAL 5012) Protection category: IP 21
Battery-connection Four M8 bolts (2 plus and 2 minus connections)
Screw terminals 13 mm2 (6
230 V AC-connection AWG)
Bolts M6 Bolts M6 Bolts M6 Bolts M6
Weight (kg) 19 34 / 30 / 30 45 / 41 45 72
470 x 350 x 280
Dimensions (hxwxd in mm) 362 x 258 x 218 444 x 328 x 240 470 x 350 x 280 470 x 350 x 280 570 x 480 x 330
444 x 328 x 240
STANDARDS
Safety EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1
Emission, Immunity EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, EN-IEC 61000-6-3, EN-IEC 61000-6-2, EN-IEC 61000-6-1
Vehicles, aftermarket 12V and 24V models: EN 50498
Anti-islanding See our website
1) Can be adjusted to 60 HZ; 120 V 60 Hz on request 3) Non-linear load, crest factor 3:1
2) Protection key: 4) At 25˚C ambient
a) output short circuit 5) Switches off when no external AC source available
b) overload 6) Programmable relay that can a.o. be set for general alarm,
c) battery voltage too high DC under voltage or genset start/stop function
d) battery voltage too low AC rating: 230 V / 4 A
e) temperature too high DC rating: 4 A up to 35 VDC, 1 A up to 60 VDC
f) 230 VAC on inverter output
g) input voltage ripple too high
Digital Multi Control Panel Computer controlled operation and monitoring BMV-700 Battery Monitor
A convenient and low cost solution for remote Several interfaces are available: The BMV-700 Battery Monitor features an advanced
monitoring, with a rotary knob to set PowerControl - MK2.2 VE.Bus to RS232 converter microprocessor control system combined with high
and PowerAssist levels. Connects to the RS232 port of a computer (see ‘A guide to VEConfigure’) resolution measuring systems for battery voltage
- MK2-USB VE.Bus to USB converter and charge/discharge current. Besides this, the
Connects to a USB port (see ‘A guide to VEConfigure’) software includes complex calculation algorithms,
- VE.Net to VE.Bus converter like Peukert’s formula, to exactly determine the
Interface to VE.Net (see VE.Net documentation) state of charge of the battery. The BMV-700
- VE.Bus to NMEA 2000 converter selectively displays battery voltage, current,
- Victron Global Remote consumed Ah or time to go. The monitor also stores
The Global Remote is a modem which sends alarms, warnings and system status a host of data regarding performance and use of
reports to cellular phones via text messages (SMS). It can also log data from the battery.
Victron Battery Monitors, Multis, Quattros and Inverters to our VRM website Several models available (see battery monitor
through a GPRS connection. Access to this website is free of charge. documentation).
- Victron Ethernet Remote
Blue Power Panel To connect to the Ethernet.
Connects to a Multi or Quattro and all VE.Net - Color Control panel (see picture on page 1)
devices, in particular the VE.Net Battery Controller. Behind the color LCD a Linux microcomputer runs open source software. The Color
Graphical display of currents and voltages. Control (CCGX) provides intuitive control and monitoring for all products connected
to it. The list of Victron products that can be connected is endless: Inverters, Multis,
Quattros, all our latest MPPT solar chargers, BMV-700, BMV-600, Lynx Ion + Shunt
and more. The information can also be forwarded to our free remote monitoring
website: the VRM Online Portal.
45
MultiPlus Inverter/Charger 2 kVA and 3 kVA
www.victronenergy.com
MultiPlus
(120 V/60 Hz)inverter/charger 2kVAcompatible
Lithium-Ion battery and 3kVA 120V Lithium Ion battery compatible
Two AC Outputs
The main output has no-break functionality. The MultiPlus takes over the supply to the connected loads in the event of
a grid failure or when shore-/generator power is disconnected. This happens so fast (less than 20 milliseconds) that
computers and other electronic equipment will continue to operate without disruption.
The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the
battery, like a water heater for example, can be connected to this output (second output available on models rated at
3kVA and more).
PowerAssist with 2x MultiPlus in parallel Five parallel units: output power 12,5 kW
46
Energy. Anytime. Anywhere.
Digital Multi Control Computer controlled operation and monitoring BMV-700 Battery Monitor
A convenient and low cost solution for remote Several interfaces are available: The BMV-700 Battery Monitor features an
monitoring, with a rotary knob to set - MK2.2 VE.Bus to RS232 converter advanced microprocessor control system
PowerControl and PowerAssist levels. Connects to the RS232 port of a computer (see ‘A guide to VEConfigure’) combined with high resolution measuring
- MK2-USB VE.Bus to USB converter systems for battery voltage and
Connects to a USB port (see ‘A guide to VEConfigure’) charge/discharge current. Besides this, the
- VE.Net to VE.Bus converter software includes complex calculation
Interface to VE.Net (see VE.Net documentation) algorithms, like Peukert’s formula, to
- VE.Bus to NMEA 2000 converter exactly determine the state of charge of
- Victron Global Remote the battery. The BMV-700 selectively
The Global Remote is a modem which sends alarms, warnings and system displays battery voltage, current,
status reports to cellular phones via text messages (SMS). It can also log consumed Ah or time to go. The monitor
data from Victron Battery Monitors, Multis, Quattros and Inverters to a also stores a host of data regarding
website through a GPRS connection. Access to this website is free of performance and use of the battery.
charge.
- Victron Ethernet Remote
Blue Power Panel To connect to Ethernet.
Connects to a Multi or Quattro and all VE.Net
devices, in particular the VE.Net Battery
Controller.
Graphic display of currents and voltages.
47
Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands
Quattro Inverter/Charger 3 kVA and 5 kVA
(120 V / 60 Hz) Lithium-Ion battery compatible www.victronenergy.com
Quattro inverter/charger 3kVA - 5kVA 120V Lithium Ion battery compatible
Two AC Outputs
The main output has no-break functionality. The Quattro takes over the supply to the connected loads in the event of a
grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that
computers and other electronic equipment will continue to operate without disruption.
The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge
the battery, like a water heater for example, can be connected to this output.
System configuring
- In case of a stand-alone application, if settings have to be changed, this can be done in a matter of
minutes with a DIP switch setting procedure.
- Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System
Configurator software.
- Off grid, grid interactive and self-consumption applications, involving grid-tie inverters and/or MPPT
Solar Chargers can be configured with Assistants (dedicated software for specific applications).
On-site Monitoring and control
Several options are available: Battery Monitor, Multi Control Panel, Ve.Net Blue Power panel, Color Control
panel, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232).
Remote Monitoring and control
Victron Ethernet Remote, Victron Global Remote and the Color Control Panel.
Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge.
Remote configuring
When connected to the Ethernet, systems with a Color Control panel can be accessed and settings can be
changed.
48
Energy. Anytime. Anywhere.
Digital Multi Control Computer controlled operation and monitoring BMV-700 Battery Monitor
A convenient and low cost solution for remote Several interfaces are available: The BMV-700 Battery Monitor features an
monitoring, with a rotary knob to set - MK2.2 VE.Bus to RS232 converter advanced microprocessor control system
PowerControl and PowerAssist levels. Connects to the RS232 port of a computer (see ‘A guide to VEConfigure’) combined with high resolution measuring
- MK2-USB VE.Bus to USB converter systems for battery voltage and
Connects to a USB port (see ‘A guide to VEConfigure’) charge/discharge current. Besides this, the
- VE.Net to VE.Bus converter software includes complex calculation
Interface to VE.Net (see VE.Net documentation) algorithms, like Peukert’s formula, to
- VE.Bus to NMEA 2000 converter exactly determine the state of charge of the
- Victron Global Remote battery. The BMV-700 selectively displays
The Global Remote is a modem which sends alarms, warnings and system battery voltage, current, consumed Ah or
status reports to cellular phones via text messages (SMS). It can also log time to go. The monitor also stores a host
data from Victron Battery Monitors, Multis, Quattros and Inverters to a of data regarding performance and use of
website through a GPRS connection. Access to this website is free of the battery.
charge.
- Victron Ethernet Remote
Blue Power Panel To connect to Ethernet.
Connects to a Multi or Quattro and all VE.Net - Color Control panel (see picture on page 1)
devices, in particular the VE.Net Battery Behind the color LCD a Linux microcomputer runs open source software. The Color
Controller. Control (CCGX) provides intuitive control and monitoring for all products connected
Graphic display of currents and voltages. to it. The list of Victron products that can be connected is endless: Inverters, Multis,
Quattros, all our latest MPPT solar chargers, BMV-700, BMV-600, Lynx Ion + Shunt
and more. The information can also be forwarded to our free remote monitoring
website: the VRM Online Portal.
49
Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands
Blue Smart IP 65 Charger
Blue Smart Charger IP65 12 V 5/7/10/15 A 24 V 5/8 A Included
Input voltage range 180-265 VAC
Efficiency 94% 95%
Clamps
Standby power consumption 0,5 W
Normal: 14,4 V Normal: 28,8 V
Charge voltage 'absorption' High: 14,7 V High: 29,4 V
Li-ion: 14,2 V Li-ion: 28,4 V
Normal: 13,8 V Normal: 27,6 V
Charge voltage 'float' High: 13,8 V High: 27,6 V
Li-ion: 13,5 V Li-ion: 27,0 V
Normal: 13,2 V Normal: 26,4 V M8
Charge voltage 'storage' High: 13,2 V High: 26,4 V
Li-ion: 13,5 V Li-ion: 27,0 V
eyelets
Charge current 5 / 7 / 10 / 15 A 5/8A
Low current mode 2 /2 / 3 / 4 A 2/3A
Temperature compensation
16 mV/°C 32 mV/°C
(lead-acid batteries only)
Can be used as power supply Yes
Back current drain 0,7 Ah/month (1 mA)
Reverse polarity Output short circuit
Protection
Over temperature
Operating temp. range -30 to +50°C (full rated output up to 30°C)
(cables retain flexibility at low temperature)
Humidity (non condensing) Max 95 %
ENCLOSURE
Black and red cable of 1,5 meter with
Optional
Battery-connection
20 A DC connector, clamps and M8 eyelets
Cable of 1,5 meter with Fused
230 V AC-connection
CEE 7/17, BS 1363 plug (UK) or AS/NZS 3112 plug clamps
Protection category IP65 (splash and dust proof)
Weight 0,9 kg 0,9 kg
12/7: 47x95x190mm 24/5: 47x95x190mm
Dimensions (h x w x d)
0ther: 60x105x190mm 24/8: 60x105x190mm
STANDARDS
Safety EN 60335-1, EN 60335-2-29 Fused
Emission EN 55014-1, EN 61000-6-3, EN 61000-3-2 M6 eyelets
Immunity EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3
www.victronenergy.com Extension
Customer support: [email protected]
cable, 2 m
Autoplug
50
Energy. Anytime. Anywhere
Anywhere.
5
Year
WARRANTY
5151
IP65 - Charger Guide
Blue Smart IP65 Charger
12V 24V
5A 7A 10 A 15 A 5A 8A
Battery size Ah 20 - 50 Ah 20 - 50 Ah 30 - 70 Ah 50 - 150 Ah 20 - 50 Ah 30 - 70 Ah
CLASSIC
MODERN
Recommended OK
This is the best charger for this This charger can be used for this battery. It is possible that it takes
type of battery. The battery will be longer to charge the battery than using a recommended charger.
charged in the most efficient way.
Voltage
Current
OPT. RECONDITION
Reconditioning
A lead-acid battery that that has been insufficiently charged or has been left
discharged during days or weeks will deteriorate due to sulfation. If caught in
time, sulfation can sometimes be partially reversed by charging the battery with
low current up to a higher voltage.
52
Energy. Anytime. Anywhere
Anywhere.
You can display the status of your charger and battery and even control the
functions of your charger using the VictronConnect app. On your screen the
readout of voltage and current is default available.
1 week
53
Blue Power IP 65 Charger
Blue Power Charger IP65 12 V 5/7/10/15 A 24 V 5/8 A Included
Input voltage range 180-265 VAC
Efficiency 94% 95%
Clamps
Standby power consumption 0,5 W
Normal: 14,4 V Normal: 28,8 V
Charge voltage 'absorption' High: 14,7 V High: 29,4 V
Li-ion: 14,2 V Li-ion: 28,4 V
Normal: 13,8 V Normal: 27,6 V
Charge voltage 'float' High: 13,8 V High: 27,6 V
Li-ion: 13,5 V Li-ion: 27,0 V
Normal: 13,2 V Normal: 26,4 V M8
Charge voltage 'storage' High: 13,2 V High: 26,4 V
Li-ion: 13,5 V Li-ion: 27,0 V eyelets
Charge current 5 / 7 / 10 / 15 A 5/8A
Low current mode 2 /2 / 3 / 4 A 2/3A
Temperature compensation
16 mV/°C 32 mV/°C
(lead-acid batteries only)
Can be used as power supply Yes
Back current drain 0,7 Ah/month (1 mA)
Reverse polarity Output short circuit
Protection
Over temperature
Operating temp. range -30 to +50°C (full rated output up to 30°C)
(cables retain flexibility at low temperature)
Humidity (non condensing) Max 95 %
ENCLOSURE
Black and red cable of 1,5 meter with
Optional
Battery-connection
20 A DC connector, clamps and M8 eyelets
Cable of 1,5 meter with Fused
230 V AC-connection
CEE 7/17, BS 1363 plug (UK) or AS/NZS 3112 plug clamps
Protection category IP65 (splash and dust proof)
Weight 0,9 kg 0,9 kg
12/7: 47x95x190mm 24/5: 47x95x190mm
Dimensions (h x w x d)
0ther: 60x105x190mm 24/8: 60x105x190mm
STANDARDS
Safety EN 60335-1, EN 60335-2-29 Fused
Emission EN 55014-1, EN 61000-6-3, EN 61000-3-2 M6 eyelets
Immunity EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3
www.victronenergy.com Extension
Customer support: [email protected]
cable, 2 m
Autoplug
54
Energy. Anytime. Anywhere
Anywhere.
5
Year
WARRANTY
5555
temperature increases up to 60°C, but the charger will not fail.
- The chargers are totally silent: no cooling fan or any other
moving parts.
CLASSIC
MODERN
Recommended OK
This is the best charger for this This charger can be used for this battery. It is possible that it takes
type of battery. The battery will be longer to charge the battery than using a recommended charger for
charged in the most efficient way. this type of battery.
Voltage
period will cause grid corrosion. It is therefore essential to reduce
the charge voltage even further when the battery remains connect
ed to the charger during more than 48 hours.
Temperature compensated charging
The optimal charge voltage of a lead-acid battery varies inversely -
with temperature. The Blue Power IP65 Charger measures ambient
Li-ion battery mode
Current
temperature during the test phase and compensates for tempera Blue Power Charger uses a specific charging algorithm for
ture during the charge process. The temperature is measured again Li-ion (LiFePO₄) batteries, with automatic Li-ion under voltage
needed.
when the charger is in low current mode during float or storage. protection reset.
Special settings for a cold or hot environment are therefore not
OPT. RECONDITION
Reconditioning
A lead-acid battery that that has been insufficiently charged or has been left
discharged during days or weeks will deteriorate due to sulfation. If caught in
time, sulfation can sometimes be partially reversed by charging the battery with
low current up to a higher voltage.
56
Energy. Anytime. Anywhere
Anywhere.
1 week
57
Skylla-i Battery Charger 24V
www.victronenergy.com
Skylla-i battery charger 24V
Li-Ion ready Li-Ion ready
Rugged
Aluminium epoxy powder coated cases with drip shield and stainless steel fixings withstand the rigors of
an adverse environment: heat, humidity and salt air.
Circuit boards are protected with an acrylic coating for maximum corrosion resistance.
Temperature sensors ensure that power components will always operate within specified limits, if needed
by automatic reduction of output current under extreme environmental conditions.
Flexible
Next to a CAN bus (NMEA2000) interface, a rotary switch, DIP switches and potentiometers are available to
adapt the charge algorithm to a particular battery and its conditions of use.
Please refer to the manual for a complete overview of the possibilities.
The right amount of charge for a lead-acid battery: variable absorption time
When only shallow discharges occur the absorption time is kept short in order to prevent overcharging of
the battery. After a deep discharge the absorption time is automatically increased to make sure that the
battery is completely recharged.
Less maintenance and aging when the battery is not in use: the Storage mode
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In
the storage mode float voltage is reduced to 2,2 V/cell (26,4 V for 24 V battery) to minimise gassing and
corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘refresh’
the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early
battery failure.
58
Energy. Anytime. Anywhere.
Controlled charging
Every TG Charger has a microprocessor, which accurately controls the charging in three steps. The
charging process takes place in accordance with the IUoUo characteristic and charges more rapidly than
other processes.
Skylla TG 24 50 3 phase
Skylla TG 24 100
U (V)
30 28,5 V
26,5 V
28
26
absorption (4 h)
absorption (30 m)
24
I (A)
bulk float float
50 (20 h) (20 h)
40
30
20
10
0
60
Energy. Anytime. Anywhere.
Universal 90-265 V AC input voltage range and also suitable for DC supply
All models will operate without any adjustment needed over a 90 to 265 Volt input voltage range, whether 50
Hz or 60 Hz.
The chargers will also accept a 90-400 V DC supply.
The approval to GL C, EMC1 implies that the Chargers also complies to IEC 60945-2002, category ‘protected’ and
‘equipment installed on the bridge of a ship’.
Charge curve
U (V)
30 28,5 V
26,5 V
28
26
absorption (4 h)
absorption (30 m)
24
I (A)
bulk float float
50 (20 h) (20 h)
40
30
20
10
0
62
Energy. Anytime. Anywhere.
Color Control GX
The Color Control (CCGX) provides intuitive control and monitoring for all products connected to it.
The list of Victron products that can be connected is endless: Inverters, Multis, Quattros, all our latest
MPPT solar chargers, BMV-700, BMV-600, Lynx Ion + Shunt and more.
Future functionality
The CCGX has endless possibilities. To implement all our ideas and wishes will take years. There are
therefore many features that are not yet available. Functions marked with ‘Future function’ will
become available later on, as a firmware update. Firmware updates are free of charge, as with all
updates of Victron products. Updating the product is easy: the CCGX will update itself automatically,
as long as it is connected to the internet. Manual updates can be done with a USB stick and microSD
cards.
Supported products
- Multis and Quattros, including split-phase and three-phase systems. Monitoring and control
(on/off and current limiter). Changing settings is not yet available.
- BlueSolar MPPT 150/70 and the MPPT 150/85. Current solar output is visible on the overview
screen, and all parameters are logged to the VRM online portal. Note that the VRM App has a
nice overview showing data of the BlueSolar MPPT 150/70 as well. When multiple BlueSolar
MPPTs with VE.Can are used in parallel, the Color Control will show all information as one. See
also our blog-post about synchronizing multiple MPPT 150/70 solar chargers.
- BlueSolar MPPT Solar Chargers with a VE.Direct port (70/15, 75/15, 100/15, 100/30, 75/50, 100/50,
150/35) can be connected to the VE.Direct ports on the CCGX. Connecting multiple at the same
time is possible. They will all appear as a separate Solar Charger in the device list.
- BMV-700 family can be connected directly to the VE.Direct ports on the CCGX. Use the
VE.Direct Cable for this. See our pricelist.
- BMV-600 family can be connected to the VE.Direct ports on the CCGX. Use the VE.Direct to
BMV60xS cable for that. See our pricelist.
- Lynx Ion + Shunt
- Lynx Shunt VE.Can
- Skylla-i
- NMEA2000 tank sensors
- A USB GPS can be connected to the USB port. Location and speed will be visible on the display,
and the data is sent to the VRM Portal for tracking purposes. The map on VRM will show the
latest position.
- WiFi USB. See our pricelist.
Note that there are more options for products which use the VE.Direct ports, such as BMVs and small
MPPTs. They can also be connected through USB, useful when more than two products need to be
connected. Use an off-the-shelf USB-hub and the VE.Direct to USB interface, ASS030530000.
Other highlights
- When connected to the internet, the CCGX will update itself automatically when there is a new
software version available.
- Multiple languages: English, Chinese, German, Italian, Spanish, French, Swedish and Dutch.
- Use the CCGX as a Modbus-TCP gateway to all connected Victron products. See our Modbus-
TCP FAQ for more information.
More information
For help with installation please read the Color Control GX Manual and visit the Frequently Asked
Questions page.
Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands REV 10 – Last update 16 February 2015
General phone: +31 (0)36 535 97 00 | Fax: +31 (0)36 535 97 40
E-mail: [email protected] | www.victronenergy.com
64
Energy. Anytime. Anywhere.
Color Control GX www.victronenergy.com
Firmware version v1.20
Color Control GX
Power supply voltage range 9 – 70V DC
Current draw 12V DC 24V DC 48V DC
Switched off 0mA 0mA 0mA
Display off 140mA 80mA 40mA
Display at minimum intensity 160mA 90mA 45mA
Display at maximum intensity 245mA 125mA 65mA
Potential free contact 3A / 30V DC / 250V AC (Normally open)
Communication ports
VE.Direct 2 separate VE.Direct ports – isolated
VE.Can 2 paralleled RJ45 sockets – isolated
VE.Bus 2 paralleled RJ45 sockets – isolated
USB 2 USB Host ports – not isolated
Ethernet 10/100/1000MB RJ45 socket – isolated except shield
3rd party interfacing
Use Modbus-TCP to monitor and control all products
Modbus-TCP
connected to the Color Control GX
JSON Use the VRM JSON API to retrieve data from the VRM Portal
Other
Outer dimensions (h x w x d) 130 x 120 x 28mm
Operating temperature range -20 to +50°C
Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands REV 10 – Last update 16 February 2015
General phone: +31 (0)36 535 97 00 | Fax: +31 (0)36 535 97 40
E-mail: [email protected] | www.victronenergy.com
65
Color
Color Control GXControl GX www.victronenergy.com
Firmware version v1.20
Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands REV 10 – Last update 16 February 2015
General phone: +31 (0)36 535 97 00 | Fax: +31 (0)36 535 97 40
E-mail: [email protected] | www.victronenergy.com
66
Energy. Anytime. Anywhere.
Color Control GX www.victronenergy.com
Firmware version v1.20
VE.Can RJ45
terminators Alarm buzzer
Ethernet
Connect to internet router
Digital Multi
Control Wifi
Connect to internet router
MPPT 75/15
upto 150/35 GPS
Not used
MicroSD Card
Used for manually updating firmware and for
data logging. The slot is accessible from the front
when the Color Control GX is mounted in a panel.
Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands REV 10 – Last update 16 February 2015
General phone: +31 (0)36 535 97 00 | Fax: +31 (0)36 535 97 40
E-mail: [email protected] | www.victronenergy.com
67
BMV-700 series: Precision Battery Monitoring
www.victronenergy.com
BMV 700 series: Precision battery monitoring
68
Energy. Anytime. Anywhere.
BMV-702
Battery Monitor BMV-700 BMV-700HS
BMV-702 BLACK
Victron Global Remote
Supply voltage range 6,5 - 95 VDC 6,5 - 95 VDC 60 – 385 VDC The Global Remote is a modem which sends alarms,
warnings and system status reports to cellular phones via
Current draw, back light off < 4mA < 4mA < 4mA
text messages (SMS). It can also log data from Victron
Input voltage range, auxiliary battery n. a. 6,5 - 95 VDC n. a. Battery Monitors, MultiPlus units, Quattros and Inverters
to a website through a GPRS connection to the VRM
Battery capacity (Ah) 20 - 9999 Ah Portal. Access to this website is free of charge.
Operating temperature range -40 +50°C (-40 - 120°F) VE.Direct to Global remote Interface cable needed
(ASS030534000).
Measures voltage of second battery, or
No Yes No
temperature, or midpoint
Temperature measurement range -20 +50°C n. a.
VE.Direct communication port Yes Yes Yes
Relay 60V / 1A normally open (function can be inverted)
RESOLUTION & ACCURACY (with a 500 A shunt)
1000A/50mV, 2000A/50mV and 600A/50mV shunt
Current ± 0,01A The quick connect PCB on the standard 500A/50mV shunt can also be mounted on these
shunts.
Voltage ± 0,01V
Amp hours ± 0,1 Ah
State of charge (0 – 100%) ± 0,1%
Time to go ± 1 min
Temperature (0 - 50°C or 30 - 120°F) n. a. ± 1°C/°F n. a.
Accuracy of current measurement ± 0,4%
Accuracy of voltage measurement ± 0,3% Interface cables
INSTALLATION & DIMENSIONS - VE.Direct cables to connect a BMV 70x to the Color Control (ASS030530xxx)
- VE.Direct to USB interface (ASS030530000) to connect several BMV 70x to the Color Control
Installation Flush mount or to a computer.
- VE.Direct to Global remote interface to connect a BMV 70x to a Global Remote.
Front 63mm diameter (ASS030534000)
Front bezel 69 x 69mm (2.7 x 2.7 inch)
Body diameter 52mm (2.0 inch)
Body depth 31mm (1.2 inch)
STANDARDS
Safety EN 60335-1
Emission / Immunity EN 55014-1 / EN 55014-2
Automotive ECE R10-4 / EN 50498
ACCESSORIES
Shunt (included) 500A / 50mV The PC application software BMV-Reader will show all current readings on a computer,
10 meter 6 core UTP with RJ12 connectors, including history data. It can also log the data to a CSV formatted file. It is available for free,
Cables (included)
and cable with fuse for ‘+’ connection and can be downloaded from our website at the Support and downloads section. Connect
Temperature sensor Optional (ASS000100000) the BMV to the computer with the VE.Direct to USB interface, ASS030530000.
Color Control
The powerful Linux computer, hidden behind
the colour display and buttons, collects data
from all Victron equipment and shows it on
the display. Besides communicating with Battery Balancer (BMS012201000)
Victron equipment, the Color Control The Battery Balancer equalizes the state of
communicates through CAN bus charge of two series connected 12V batteries, or
(NMEA2000), Ethernet and USB. of several parallel strings of series connected
Data can be stored and analysed on the VRM A maximum of four BMVs can be connected directly to the Color Control. batteries.
Portal. Even more BMVs can be connected to a USB Hub for central monitoring. When the charge voltage of a 24V battery
system increases to more than 27V, the Battery
Balancer will turn on and compare the voltage
over the two series connected batteries. The
With the VE.Direct to Battery Balancer will draw a current of up to 1A
Bluetooth Smart dongle real from the battery (or parallel connected batteries)
time data and alarms can be with the highest voltage. The resulting charge
displayed on Apple and current differential will ensure that all batteries
Android smartphones, will converge to the same state of charge.
tablets, macbooks and other
devices. If needed, several balancers can be paralleled.
Also use your smartphone to A 48V battery bank can be balanced with three
adjust settings! Battery Balancers.
69
7070
70
Energy. Anytime. Anywhere.
71 71
BlueSolar Monocrystalline Panels
www.victronenergy.com
MC4 connectors
Electrical data under STC (1)
Nominal Max-Power Max-Power Open-Circuit Short-Circuit
Article Number Description Weight
Power Voltage Current Voltage Current
PMPP VMPP IMPP Voc Isc
Kg W V A V A
SPM030301200 30W-12V Mono 430×545×25mm series 3a 2.5 30 18 1.67 22.5 2
SPM030501200 50W-12V Mono 630×545×25mm series 3a 4 50 18 2.78 22.2 3.16
SPM030801200 80W-12V Mono 1195×545×35mm series 3a 8 80 18 4.45 22.3 4.96
SPM031001200 100W-12V Mono 1195x545×35mm series 3a 8 100 18 5.56 22.4 6.53
SPM031301200 130W-12V Mono 1480x673×35mm series 3a 12 130 18 7.23 22.4 8.49
SPM031902400 190W-24V Mono 1580x808×35mm series 3a 15 190 36 5.44 43.2 5.98
SPM033002400 300W-24V Mono 1956x992×45mm series 3a 24 300 36 8.06 45.5 8.56
Nominal Power (±3% tolerance) 30W 50W 80W 100W 130W 190W 300W
Cell type Monocrystalline
Number of cells in series 36 72
Maximum system voltage (V) 1000 V
Temperature coefficient of PMPP (%) -0.48/°C -0.48/°C -0.48/°C -0.48/°C -0.48/°C -0.48/°C -0.48/°C
Temperature coefficient of Voc (%) -0.34/°C -0.34/°C -0.34/°C -0.34/°C -0.34/°C -0.34/°C -0.34/°C
Temperature coefficient of Isc (%) +0.037/°C +0.037/°C +0.037/°C +0.037/°C +0.05/°C +0.037/°C +0.037/°C
Temperature Range -40°C to +85°C
Surface Maximum Load Capacity 200 kg/m²
Allowable Hail Load 23 m/s, 7.53 g
Junction Box Type PV-LH0801 PV-LH0808 PV-JB002
Length of Cables / Connector Type No cable No cable 900 mm MC4
Output tolerance +/-3%
Frame Aluminium
Product warranty 5 years
Warranty on electrical performance 10 years 90% + 25 years 80% of power output
Smallest packaging unit 1 panel
Quantity per pallet 100 40 20 18
2
1) STC (Standard Test Conditions): 1000 W/m , 25ºC, AM (Air Mass) 1.5
72
BlueSolar Polycrystalline Panels Energy. Anytime. Anywhere.
www.victronenergy.com
MC4 connectors
SPP SPP SPP SPP SPP SPP SPP SPP SPP SPP
Module 030201200 030301200 020401200 030501200 020751200 030801200 031001200 031401200 032502400 032902400
Nominal Power (± 3% tolerance) 20W 30W 40W 50W 75W 80W 100W 140W 250W 290W
Cell type Polycrystalline
Number of cells in series 36 40 60 72
Maximum system voltage (V) 1000V
Temperature coefficient of PMPP (%) -0.47/°C -0.48/°C -0.48/°C -0.48/°C -0.47/°C
Temperature coefficient of Voc (%) -0.34/°C -0.34/°C -0.34/°C -0.35/°C -0.34/°C
Temperature coefficient of Isc (%) +0.045/°C +0.037/°C +0.037/°C +0.037/°C +0.045/°C
Temperature Range -40°C to +85°C
Surface Maximum Load Capacity 200 kg/m²
Allowable Hail Load 23 m/s, 7.53 g
Junction Box Type PV-LH0801 PV-JH02 PV-LH0808 PV-JB002
Length of Cable / connector No cable No cable No cable No cable 900 mm / MC4
Output tolerance +/-3%
Frame Aluminium
Product warranty 5 years
Warranty on electrical performance 10 years 90% + 25 years 80% of power output
Smallest packaging unit 1 panel
Quantity per pallet 150 100 20 19 18
2
1) STC (Standard Test Conditions): 1000 W/m , 25ºC, AM (Air Mass) 1.5
73
BlueSolar Charge Controller MPPT 75/10, 75/15 & MPPT 100/15
BlueSolar charge controller MPPT 75/10, 75/15 & MPPT 100/15 www.victronenergy.com
74
Energy. Anytime. Anywhere.
BlueSolar Charge Controller MPPT 100/30
BlueSolar charge controller MPPT 100/30
www.victronenergy.com
75
BlueSolar Charge Controller MPPT 100/50
BlueSolar charge controller MPPT 100/50 www.victronenergy.com
76
Energy. Anytime. Anywhere.
BlueSolar Charge Controller MPPT 150/35
BlueSolar charge controller MPPT 150/35
www.victronenergy.com
77
BlueSolar Charge Controllers with screw- or MC4 PV connection
BlueSolar
MPPT charge
150/45, controller
MPPT MPPT
150/60, 150/45
MPPT up to 150/100
150/70, MPPT 150/85, MPPT 150/100 with screw- or MC4 PV connection
www.victronenergy.com
78
Energy. Anytime. Anywhere.
BlueSolar Charge Controller MPPT 150/70 & 150/85
www.victronenergy.com
BlueSolar charge controller MPPT 150/70 & MPPT 150/85
PV voltage up to 150 V
The BlueSolar MPPT 150/70 and 150/85 charge controllers will charge a lower nominal-voltage battery from a
higher nominal voltage PV array.
The controller will automatically adjust to a 12, 24, 36, or 48V nominal battery voltage.
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller
will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to
slower MPPT controllers.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points may be present on the power-voltage curve.
Conventional MPPT’s tend to lock to a local MPP, which may not be the optimum MPP.
The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding conversion efficiency
Maximum efficiency exceeds 98%. Full output current up to 40°C (104°F).
Flexible charge algorithm
Several preconfigured algorithms. One user programmable algorithm.
Manual or automatic equalisation.
Battery temperature sensor. Battery voltage sense option.
Programmable auxiliary relay
For alarm or generator start purposes
Solar Charge Controllers Extensive electronic protection
MPPT 150/70 and 150/85 Over-temperature protection and power derating when temperature is high.
PV short circuit and PV reverse polarity protection.
Reverse current protection.
CAN bus
To parallel up to 25 units, to connect to a ColorControl panel or to connect to a CAN bus network
79
BlueSolar PWM-Light Charge Controllers
www.victronenergy.com
Features
- Load output with low battery voltage disconnect function.
- Lighting control function, one timer only.
- Two digit seven segment display for quick and easy setting of the load output functionality, including
timer setting.
- Three stage battery charging (bulk, absorption, float), not programmable.
- Load output protected against over load and short circuit.
- Protected against reverse polarity connection of the solar array and/or battery.
BlueSolar PWM-Light 10A
Day/night timing options
See manual for details
1) For 12V use 36 cell solar panels 2) The controller switches to the lower float voltage level 2
For 24V use 72 cell solar panels hours after the absorption voltage has been reached.
or 2x 36 cell in series Whenever the battery voltage becomes lower than 13V, a new
charge cycle is triggered.
80
Energy. Anytime. Anywhere.
BlueSolar PWM-Pro Charge Controllers
BlueSolar PWM-Pro www.victronenergy.com
charge controllers
Programmable
The BlueSolar PWM-Pro series is ready for use with its default settings.
It also is fully programmable:
- With help of a computer and software (available free of charge from our website)
- With the dedicated BlueSolar Pro Remote Panel (see features below).
Features
- Lighting control function, fully programmable.
- Three stage battery charging (bulk, absorption, float), fully programmable.
- Integrated battery monitor function (Remote Panel needed to display state of charge).
BlueSolar PWM-Pro 10A - Load output with low voltage disconnect and manual control (default setting).
- Optional external temperature sensor.
- Load output protected against over load and short circuit.
- Protected against reverse polarity connection of the solar array and/or battery.
81
82
Energy. Anytime. Anywhere.
83
Victron Battery Balancer
www.victronenergy.com
Battery Balancer
The problem: the service life of an expensive battery bank can be substantially shortened due to state of charge unbalance
One battery with a slightly higher internal leakage current in a 24V or 48V bank of several series/parallel connected batteries will cause
undercharge of that battery and parallel connected batteries, and overcharge of the series connected batteries. Moreover, when new cells
or batteries are connected in series, they should all have the same initial state of charge. Small differences will be ironed out during
absorption or equalize charging, but large differences will result in damage due to excessive gassing (caused by overcharging) of the
batteries with the higher initial state of charge and sulphation (caused by undercharging) of the batteries with the lower initial state of
charge.
LED indicators
Green: on (battery voltage > 27,3V)
Orange: lower battery leg active (deviation > 0,1V)
Orange: upper battery leg active (deviation > 0,1V)
Red: alarm (deviation > 0,2V). Remains on until the deviation has reduced to less than 0,14V, or until system voltage drops to less than
26,6V.
Alarm relay
Normally open. The alarm relay closes when the red LED switches on and opens when the red LED switches off.
Alarm reset
Two terminals are available to connect a push button. Interconnecting the two terminals resets the relay.
The reset condition will remain active until the alarm is over. Thereafter the relay will close again when a new alarm occurs.
Even more insight and control with the midpoint monitoring function of the BMV-702 Battery Monitor
The BMV-702 measures the midpoint of a string of cells or batteries. It displays the deviation from the ideal midpoint in volts or percent.
Separate deviation percentages can be set to trigger a visual/audible alarm and to close a potential free relay contact for remote alarm
purposes.
Please see the manual of the BMV-702 for more information about battery balancing.
84
Energy. Anytime. Anywhere.
Installation
1) The Battery Balancer(s) must be installed on a well-ventilated vertical
surface close to the batteries (but, due to possible corrosive gasses,
not above the batteries!)
2) In case of series-parallel connection, the midpoint
interconnecting cables must be sized to at least carry the current
that arises when one battery becomes open-circuited.
- In case of 2 parallel strings: cross section 50% of the series
interconnecting cables.
- In case of 3 parallel strings: cross section 33% of the series
interconnecting cables, etc.
3) If required: first wire the alarm contact and the alarm reset.
4) Use at least 0,75 mm² to wire the negative, positive and midpoint
connections (in this order).
5) The balancer is operational.
When the voltage over a string of two batteries is less than 26,6V the
balancer switches to standby and all LEDs will be off.
When the voltage over a string of two batteries increases to more than
27,3V (during charging) the green LED will turn on, indicating that the
balancer is on.
When on, a voltage deviation of more than 50 mV will start the
balancing process and at 100 mV one of the two orange LEDs will turn
on. A deviation of more than 200 mV will trigger the alarm relay.
In case of an older battery bank which has performed well in the past, the
Three Battery Balancers connected to 12 series-parallel
problem may be due to: connected 12V batteries (48V system)
d) Systematic undercharge: more frequent charging needed (VRLA
batteries), or equalization charge needed (flooded deep cycle flat
plate or OPzS batteries). Better and regular charging will solve the
problem.
e) One or more faulty cells: replace all batteries.
85
Telecom Batteries
www.victronenergy.com
heavy duty, front access
Telecom batteries
Designed for telecom applications; excellent ‘floor space savers’ for marine and vehicle applications
The deep cycle AGM telecom series has been designed for use in telecom systems. With front access terminals
and small footprint, the batteries are ideal for racked systems. Similarly, these batteries can help solve limited
floor space and access problems on board boats and vehicles.
AGM technology
AGM stands for Absorbent Glass Mat. In these batteries the electrolyte is absorbed into a glass-fibre mat
between the plates by capillary action.
Low self-discharge
Because of the use of lead calcium grids and high purity materials, Victron VRLA batteries can be stored during
Telecom Battery long periods of time without recharge. The rate of self-discharge is less than 2% per month at 20°C. The self-
Battery AGM 12V 200Ah discharge doubles for every increase in temperature by 10°C.
86
OPzS Solar Batteries Energy. Anytime. Anywhere.
www.victronenergy.com
Low maintenance
Under normal operating conditions and 20ºC, distilled water has to be added every 2 - 3 years.
87
Gel and AGM Batteries
www.victronenergy.com
1. VRLA technology
VRLA stands for Valve Regulated Lead Acid, which means the batteries are sealed. Gas will escape through the safety valves only
in case of overcharging or cell failure.
VRLA batteries are maintenance free for life.
Our AGM deep cycle batteries have excellent high current performance and are therefore recommended for high current
applications such as engine starting. Due to their construction, Gel batteries have a lower effective capacity at high discharge
currents. On the other hand, Gel batteries have a longer service life, both under float and cycling conditions.
88
Energy. Anytime. Anywhere.
www.victronenergy.com
Capacity (%)
Temperature (°C)
Fig. 1: Effect of temperature on capacity
Fig. 1: Effect of temperature on capacity
9. Cycle life of Victron batteries
Batteries age due to discharging and recharging. The number of cycles depends on the depth of discharge, as is shown in figure
2.
AGM Deep
AGM Deep Cycle
Cycle Gel Deep
Gel DeepCycle
cycle Gel Long
Gel longLife
life
Cycles
Depth
Depthof
of discharge
discharge
Fig.
Fig.2: Cycle
2: Cycle lifelife
10. Battery charging in case of cycle use: the 3-step charge curve
The most common charge curve used to charge VRLA batteries in case of cyclic use is the 3-step charge curve, whereby a
constant current phase (the bulk phase) is followed by two constant voltage phases (absorption and float), see fig. 3.
15 120
Charge voltage
Charge current
Vol t age voltage
Courant de charge
Charge current
de charge
14.5 100
14 80
13.5 60
Charge
13 40
12.5 20
12 0
0 2 4 6 8 10
Fig.
Fig. 3:3: Three
Three step charge
step charge curve curve
During the absorption phase the charge voltage is kept at a relatively high level in order to fully recharge the battery within
reasonable time. The third and last phase is the float phase: the voltage is lowered to standby level, sufficient to compensate for
self-discharge.
89
www.victronenergy.com
GEL and AGM batteries
• Thereafter the absorption voltage is applied during a fixed period of time, irrespective of how deep the battery has
been discharged previously. A full absorption period after a shallow discharge will overcharge the battery, again
reducing service life (a.o. due to accelerated corrosion of the positive plates).
• Research has shown that battery life can be increased by decreasing float voltage to an even lower level when the
battery is not in use.
11. Battery charging: longer battery life with Victron 4-step adaptive charging
Victron developed the adaptive charge curve. The 4-step adaptive chare curve is the result of years of research and testing.
The Victron four-step adaptive charge curve solves the 3 main problems of the 3-step curve:
• Battery Safe Mode
In order to prevent excessive gassing, Victron has invented the ‘Battery Safe Mode’. The Battery Safe Mode will limit
the rate of voltage increase once the gassing voltage has been reached. Research has shown that this will reduce
internal gassing to a safe level.
• Storage mode
After completion of the absorption period the battery should be fully charged, and the voltage is lowered to the
float or standby level. If no discharge occurs during the next 24 hours, the voltage is reduced even further and the
battery goes into storage mode. The lower storage voltage reduces corrosion of the positive plates.
Once every week the charge voltage is increased to the absorption level for a short period to compensate for self-
discharge (Battery Refresh mode).
12. Battery charging in case of standby use: constant voltage float charging
When a battery is not frequently deeply discharged, a 2-step charge curve can be used. During the first phase the battery is
charged with a limited current (the bulk phase). Once a pre-set voltage has been reached the battery is kept at that voltage (the
float phase).
This charge method is used for starter batteries in vehicles and in uninterruptible power supplies (UPS).
Charge current
14 80
13.5 60
13 // // 40
12.5 20
Fig.
12 4: Four-step adaptive charge curve
13. Optimum charge voltage of Victron VRLA batteries
// // 0
0
10
12
14
16
18
20
22
The recommended charge voltage settings for a 12V battery are shown in table 3. Fig. 4: Four-step adaptive
14. Effect of temperature on charging voltage
charge curve
The charge voltage should be reduced with increased temperature. Temperature compensation is required when the
temperature of the battery is expected to be less than 10°C / 50°F or more than 30°C / 85°F during long periods of time.
The recommended temperature compensation for Victron VRLA batteries is -4 mV / Cell (-24 mV /°C for a 12V battery).
The centre point for temperature compensation is 20°C / 70°F.
90
Energy. Anytime. Anywhere.
www.victronenergy.com
91
12,8 Volt Lithium-Iron-Phosphate Batteries
12,8 Volt lithium iron phosphate batteries www.victronenergy.com
Why lithium-iron-phosphate?
Lithium-iron-phosphate (LiFePO4 or LFP) is the safest of the mainstream li-ion battery types. The nominal
voltage of a LFP cell is 3,2V (lead-acid: 2V/cell). A 12,8V LFP battery therefore consists of 4 cells connected in
series; and a 25,6V battery consists of 8 cells connected in series.
Rugged
A lead-acid battery will fail prematurely due to sulfation:
• If it operates in deficit mode during long periods of time (i.e. if the battery is rarely, or never at all,
fully charged).
• If it is left partially charged or worse, fully discharged (yacht or mobile home during wintertime).
A LFP battery does not need to be fully charged. Service life even slightly improves in case of partial charge
instead of a full charge. This is a major advantage of LFP compared to lead-acid.
Other advantages are the wide operating temperature range, excellent cycling performance, low internal
resistance and high efficiency (see below).
12,8V 90Ah LiFePO4 Battery
LFP is therefore the chemistry of choice for very demanding applications.
Efficient
In several applications (especially off-grid solar and/or wind), energy efficiency can be of crucial importance.
The round trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of the average lead-
acid battery is 80%.
The round trip energy efficiency of a LFP battery is 92%.
The charge process of lead-acid batteries becomes particularly inefficient when the 80% state of charge has
been reached, resulting in efficiencies of 50% or even less in solar systems where several days of reserve energy
is required (battery operating in 70% to 100% charged state).
In contrast, a LFP battery will still achieve 90% efficiency under shallow discharge conditions.
Endless flexibility
LFP batteries are easier to charge than lead-acid batteries. The charge voltage may vary from 14 V to 16 V (as
long as no cell is subjected to more than 4,2 V), and they do not need to be fully charged. Therefore several
batteries can be connected in parallel and no damage will occur if some batteries are less charged than others.
The current which flows through a fully-charged LFP cell however, is nearly zero, and lagging cells will therefore
not be fully charged. Over time the differences between cells may become so extreme that, even though the
overall battery voltage is within limits, some cells will fail due to over- or under voltage. Cell balancing is
therefore highly recommended.
92
Energy. Anytime. Anywhere.
Our LFP batteries have integrated cell balancing and cell monitoring. Up to ten batteries can be paralleled and up to four batteries can
be series connected, so that a 48V battery bank of up to 3000Ah can be assembled. The cell balancing/monitoring cables can be daisy-
chained and must be connected to a Battery Management System (BMS).
Battery specification
LFP-BMS LFP-BMS LFP-BMS LFP-BMS LFP-BMS
VOLTAGE AND CAPACITY
12,8/60 12,8/90 12,8/160 12,8/200 12,8/300
Nominal voltage 12,8V 12,8V 12,8V 12,8V 12,8V
Nominal capacity @ 25°C* 60Ah 90Ah 160Ah 200Ah 300Ah
Nominal capacity @ 0°C* 48Ah 72Ah 130Ah 160Ah 240Ah
Nominal capacity @ -20°C* 30Ah 45Ah 80Ah 100Ah 150Ah
Nominal energy @ 25°C* 768Wh 1152Wh 2048Wh 2560Wh 3840Wh
*Discharge current ≤1C
Protects each individual cell of a Victron lithium iron phosphate (LiFePO4 or LFP) battery
Each individual cell of a LiFePO4 battery must be protected against over voltage, under voltage and over
temperature.
Victron LiFePO4 batteries have integrated Balancing, Temperature and Voltage control (acronym: BTV) and
connect to the VE.Bus BMS with two M8 circular connector cord sets.
The BTVs of several batteries can be daisy chained. Up to ten batteries can be paralleled and up to four
batteries can be series connected (BTVs are simply daisy-chained) so that a 48V battery bank of up to
2000Ah can be assembled. Please see our LiFePO4 battery documentation for details.
The BMS will:
- shut down or disconnect loads in case of imminent cell under voltage,
- reduce charge current in case of imminent cell overvoltage or over temperature (VE.Bus
products only, see below), and
- shut down or disconnect battery chargers in case of imminent cell overvoltage or over
temperature.
VE.Bus BMS
Protects 12V, 24V and 48V systems
The operating voltage range of the BMS: 9 to 70V DC.
Load Disconnect
The Load Disconnect output is normally high and becomes free floating in case of imminent cell under
voltage. Maximum current: 2A.
The Load Disconnect output can be used to control
- the remote on/off of a load, and/or
- the remote on/off of an electronic load switch (Battery Protect)
Charge Disconnect
The Charge Disconnect output is normally high and becomes free floating in case of imminent cell over
voltage or over temperature. Maximum current: 10mA.
The Charge Disconnect output can be used to control
- the remote on/off of a charger and/or
- a Cyrix-Li-Charge relay and/or
- a Cyrix-Li-ct Battery Combiner
LED indicators
- Enabled (blue): VE.Bus products are enabled.
- Cell>4V or temperature (red): charge disconnect output low because of imminent cell over
voltage or over temperature.
- Cell>2,8V (blue): load disconnect output high.
94
Energy. Anytime. Anywhere.
VE.Bus BMS
Four Cyrix Combiners especially designed for use with the VE.Bus BMS:
Why Lithium-Iron-Phosphate?
Lithium-Iron-Phosphate (LiFePO4 or LFP) is the safest of the mainstream Li-ion battery types. The nominal
24V 180Ah Lithium-Ion Battery
voltage of a LFP cell is 3,2V (lead-acid: 2V / cell). A 25,6V LFP battery consists of 8 cells connected in series.
Complete system
A complete system consists of:
Lynx Ion • One or more 24V 180Ah Lithium-Ion batteries.
• (optional) The Lynx Power In, a modular dc bus bar.
• The Lynx Ion is the Battery Management System (BMS) that controls the batteries. A 350 Ampere
safety contactor is inside the Lynx Ion.
• The Lynx Shunt VE.Can, a battery monitor including the main fuse. Note that the fuse needs to be
purchased separately.
• (optional) The Lynx Distributor, a DC distribution system with fuses.
• (optional) The Ion Control, a digital control panel.
For both overcharging and depletion there is a last safety resort, the built-in 350 A contactor. In case signalling
etcetera does not stop the imminent overcharge or depletion, it will open the contactor.
NMEA2000 Canbus
Communication with the outside world is done via the VE.Can protocol.
96
Energy. Anytime. Anywhere.
Yes, up to 2
Series configuration
(more in series on request)
Yes, easy up to 4
Parallel configuration
(more parallel on request)
97
About Victron Energy
With over 40 years of experience, Victron Energy enjoys an unrivalled reputation for technical innovation, reliability and quality.
Victron is a world leader in the supply of self-supporting electrical power. Our products have been designed to meet the most
demanding situations faced by a diversity of craft, recreational and commercial alike. Victron’s ability to meet the demand for
customized off-grid systems is unprecedented. Our product range includes sine wave inverters and inverter/chargers, battery
chargers, DC/DC converters, transfer switches, gel and AGM batteries, alternators, battery monitors, solar charge regulators,
solar panels, complete network solutions and many other innovative solutions.
Having served the off-grid, industrial and vehicle markets as well as both the commercial and leisure marine sectors for over 40
years, Victron has an established network of dealers and distributors covering the whole world. Our customer base is such that
providing prompt and competent local service is essential.
This is reflected in the capabilities of our support network. Our flexible approach to service support and our commitment to
quick turnaround for repairs is marketleading. There are countless examples of Victron products that have provided for
decades of reliable service in the most demanding applications. This level of reliability combined with the highest level of
technical know-how results in Victron Energy power systems that offer the very best value available.
9898
Energy. Anytime. Anywhere.
9999
Basecamp Xtreme Everest
SAL064132020
REV 03
2016-5