Catalogue: Automation For Gates and Doors
Catalogue: Automation For Gates and Doors
> EN
deasystem.com /deasystem
Article Patented
icons
Operator with 2 channels
Encoder for position Control board with integrated
management and obstacles receiver
detection
Use intensity
⁕ Residential
Motor power supply
⁕⁕ semi-intensive
⁕ ⁕ ⁕ Intensive
MAC/STING .................................................. 17
LOOK ............................................................ 21
OLI/N ............................................................. 25
GEKO ............................................................ 28
LIVI 502 ........................................................ 31
ANGOLO ....................................................... 35
GHOST 100 ................................................... 38
GHOST 200 ................................................... 41
ADVANCE ..................................................... 51
SPACE .......................................................... 54
TEO 700 ........................................................ 57
LATO ............................................................. 61
WILL G ......................................................... 68
PASS ............................................................. 71
STOP ............................................................. 75
ROCK ............................................................ 80
NETLINK DEVICES
AND ACCESSORIES .................................... 86
1
SLIDING GATES
Automation for residential, collective and industrial sliding gates
SELECTION GUIDE
Select the right automation
LIVI 6/24N
1400 kg ** z REV220
230V NET230N
*** z z REV220/RF
2
LIVI/N Control board positioned in a
lifted position at the front. Always
accesible and perfect for small or
narrow spaces
Automation for residential sliding gates
up to 900 Kg
NETLINK OPERATOR
This operator is compatible
with the NETLINK System
and can be programmed
with DEAInstaller and
NETBOX
3
Compatible with the Apps
All models have: control board and fixing plate (to be screwed) included
LIVI
614750 600 kg * NET24N
6/24N/F
LIVI
614752 600 kg * NET24N
6/24N/M
LIVI
614751 6/24N/ 600 kg * NET24N • Irreversible with limit switches (magnetic only for 6/24N/M, 6/24N/M-
F-BOOST BOOST and 9/24N/M versions)
• Speed adjustment and slow down in opening and closing
LIVI • Anti-crushing safety device
614753 6/24N/ 600 kg * NET24N • Versions with increased speed only in BOOST models (16m/min)
M-BOOST
LIVI
615750 900 kg * NET24N
9/24N/F
LIVI
615751 900 kg * NET24N
9/24N/M
All models have: control board and fixing plate (to be screwed) included
LIVI/N 4
LIVI 403N - LIVI 6N LIVI 803N - LIVI 9N LIVI 6/24N/F LIVI 6/24N/F-BOOST LIVI 9/24N/F
TECHNICAL INFO
LIVI 6N/M LIVI 9N/M LIVI 6/24N/M LIVI 6/24N/M-BOOST LIVI 9/24N/M
Motor power supply (V) 230V ~ ±10% (50/60 Hz) 24V ⎓
Maximum power absorption (W) 320 450 80 110
Max thrust (N) 340 490 210 240 260
Duty cycle (cycles/h)* 18 11 22 18
N. max. cycles in 24h* 60 40 60 40
Built-in capacitor (μF) 8 12,5 \
Operating temperature (°C) -20 ÷ 50
Motor thermal protection (°C) 140 160 \
Speed (m/min) 10 16 10
Standard pinion Z16 Z16 Z16 Z16 Z16
Weight with packing (Kg) 11 12,5 12
Sound pressure (dBA) < 70
Protection level IPX4 (IP44 for versions with magnetic limit switches)
u
DIMENSIONS
y
t
354
e
66
e
86
r 259
e
187
142
e
w
r
q
KIT KIT
KIT KIT
u COD. 661063
COD. 672645
Art. GTI4
Art. AURA230 Serialized white 4-channel remote
230V flashing light, LED, with control, 433 MHz, with 3 coding: HCS
integrated antenna, 433 MHz Rolling-Code, Dip-Switch and new
D.A.R.T. coding
5 LIVI/N
SPECIFIC ACCESSORIES
COD. 126000
COD. 619000 COD. 126001 Art. 113
Art. 111 Art. 112 Galvanized steel rack
Nylon rack, with fixing Galvanized steel rack 30x12mm with zinc-plated
screws (1m) 22x22mm (1m) spacers and fixing screws
(1m)
COD. 667053
COD. 171040 COD. 171044 Art. SOFT3
Safety rubber profile (complete
Art. CR-25 Art. CC-20 with aluminium base) useful to
Resistive edge L=2,5m Conductive edge L=2m
reduce the impact forces for
sliding and swing gates (12m)
LIVI/N 6
REV
Control board positioned in a
Automation for collective sliding gates lifted position at the front. Always
up to 1400 Kg accesible and perfect for small or
narrow spaces
NETLINK OPERATOR
This operator is compatible
with the NETLINK System
and can be programmed Can be used with anti-vandal
with DEAInstaller and steel enclosure IRONBOX
NETBOX
7
Compatible with the Apps
• Self-locking
• Magnetic limit switches
616003 REV220/M 1400 kg* ** NET230N z • Speed adjustment and slow down in opening and closing
• Motor control by encoder and obstacle detection
All models have (IB version excluded): control board and fixing plate to be cemented included
* If using an oversized pinion art. Z22, the maximum weight of the leaf should be reduced by 30%
• Self-locking
616012 REV24/M 1400 kg* *** NET24N • Magnetic limit switches
• Speed adjustment and slow down in opening and closing
All models have (IB version excluded): control board and fixing plate to be cemented included
* If using an oversized pinion art. Z22, the maximum weight of the leaf should be reduced by 30%
Speed (m/min) 10 12
REV 8
EXAMPLE OF A TYPICAL INSTALLATION
y
u
DIMENSIONS
e t
113 (Z18)**
r
106 (Z15)*
e
288
w e
104
r 223 321
u COD. 661063
COD. 672645
Art. GTI4 COD. 668010
Art. AURA230 Serialized white 4-channel remote
Art. 127
230V flashing light, LED, with control, 433 MHz, with 3 coding: HCS
Rolling-Code, Dip-Switch and new Warning sign
integrated antenna, 433 MHz
D.A.R.T. coding
SPECIFIC ACCESSORIES
COD. 126000
COD. 619000 COD. 126001 Art. 113
Art. 111 Art. 112 Galvanized steel rack
Nylon rack, with fixing Galvanized steel rack 30x12mm with zinc-plated
screws (1m) 22x22mm (1m) spacers and fixing screws
(1m)
* If using an oversized pinion art. Z22, the maximum weight of the leaf should be reduced by 30%
9 REV
GULLIVER
Automation for industrial sliding gates
up to 2500 Kg
10
Compatible with the Apps
• Self-locking
• Magnetic limit switches
613301 18NET/M 2100 kg *** NET230N z • Speed adjustment and slow down in opening and closing
• Motor control by encoder and obstacle detection
All models have (IB version excluded): control board and fixing plate to be cemented included
All models have (IB version excluded): control board and fixing plate to be cemented included
Motor power supply (V) 230V ~ ± 10 % (50/60 Hz) 400V AC ~ ± 10 % (50/60 Hz)
Duty cycle (cycles/hours) 15 - for a 12 m leaf length 17 - for a 14m leaf length
Speed (m/min) 10
11 GULLIVER
EXAMPLE OF A TYPICAL INSTALLATION
DIMENSIONS
y
t
402
e e e
e r
115
w 120
r 245 325
u COD. 661063
COD. 672645
Art. GTI4 COD. 668010
Art. AURA230 Serialized white 4-channel remote
Art. 127
230V flashing light, LED, with control, 433 MHz, with 3 coding: HCS
Warning sign
integrated antenna, 433 MHz Rolling-Code, Dip-Switch and new
D.A.R.T. coding
SPECIFIC ACCESSORIES
COD. 126000
COD. 619000 COD. 126001 Art. 113
Art. 111 Art. 112 Galvanized steel rack
Nylon rack, with fixing Galvanized steel rack 30x12mm with zinc-plated
screws (1m) 22x22mm (1m) spacers and fixing screws
(1m)
COD. 667053
COD. 171040 COD. 171044 Art. SOFT3
Safety rubber profile (complete
Art. CR-25 Art. CC-20 with aluminium base) useful to
Resistive edge L=2,5 Conductive edge L=2m
reduce the impact forces for
sliding and swing gates (12m)
GULLIVER 12
IRONBOX
Painted-steel (RAL 9006) vandal-proof box for REV and
GULLIVER , complete with magnetic limit switches (code 619070)
and foundation plate.
COD. DIMENSIONS
280
1002
594
339
13
REV - 230V ~ operators without control board and motor cover
• Self-locking
• Magnetic limit switches inside IRONBOX
616005 REV220/IB 1400 kg ** z • Motor control by encoder and obstacle detection
• Designed for IRONBOX
Control board to complete the installation: control board cod. 677610 art. NET230N/C (with box)
• Self-locking
616013 REV24/IB 1400 kg *** • Magnetic limit switches inside IRONBOX
• Designed for IRONBOX
Control board to complete the installation: control board cod. 678263 art. NET24N/C250 (with box) with 250VA transformer
• Self-locking
• Magnetic limit switches inside IRONBOX
613302 18/IB 2100 kg *** z • Motor control by encoder and obstacle detection
• Designed for IRONBOX
Control board to complete the installation: control board cod. 677610 art. NET230N/C (with box)
• Self-locking
• Magnetic limit switches inside IRONBOX
613219 25/IB 2500 kg *** z • Motor control by encoder and obstacle detection
• Designed for IRONBOX
Control board to complete the installation: control board cod. 677140 art. 400RR/C (with box)
IRONBOX 14
SWING GATES
Choose the automation for your swing gate
STING
LOOK ANGOLO
• Up to 5m - 280Kg • up to 2,3m - 200kg
• 230V / 24V • 24V
• Residential and semi-intensive • Residential use
use • Available versions with articulated
• Available versions with encoder or sliding arm
and limit switches
15
SELECTION GUIDE
Choose the maximum length of your gate
Linear rams
art.
110° 230V * z MAC/FM
MAC - STING
400 kg
art.
110° 24V ** MAC/FM
MAC - STING
Underground operators
107°
(+ art.116G/N 230V * z z GHOST100
= 180°)
3,5m 400 kg
107°
(+ art.116G/N 24V ** z GHOST100
= 180°)
107°
(+ art.216 230V ** art. 218 GHOST200
= 180°)
4m 400 kg
107°
(+ art.216= 24V *** art. 218 GHOST200
180°)
16
MAC / STING
Electromechanical automation for swing gates
up to 3 m - 400 kg
STING
MAC
17
Compatible with the Apps
MAC
COD. OTHER CHARACTERISTICS
625010 MAC
395mm without MAC/FM
* • For leafs up to 3m length
MAC- 334mm with MAC/FM
625014
BLACK
MAC
COD. OTHER CHARACTERISTICS
625040 MAC/24
395mm without MAC/FM
** • For leafs up to 3m length
MAC/24- 334mm with MAC/FM
625044
BLACK
*the opening time of the leaf at 90° may be lower accordingly to the geometry of the installation
MAC / STING 18
DIMENSIONS FIXING PLATES
MAC STING
30
34
Ø15
61 (MIN)
147
129 (MAX)
10
88
168
15
15
18
Ø10
162
6
37,5 45 37,5
134,5
140 (MAX)
101 (MIN)
Ø10,5
110
=
75
35
=
797 8 84
63
60 8 95 120
t w
e e
q
r
e
q
r
KIT KIT
COD. 672645
COD. 661063
y Art. AURA230
Art. GTI4
Serialized white 4-channel remote
COD. 668010
Art. 127
230V flashing light, LED, with control, 433 MHz, with 3 coding: HCS Warning sign
integrated antenna, 433 MHz Rolling-Code, Dip-Switch and new
D.A.R.T. coding
19 MAC / STING
SPECIFIC ACCESSORIES
COD. 629300
COD. 629320 COD. 629312
Art. MAC/FM Art. MAC-LOOK/P Art. MLS/SFR
Mechanical stops for MAC/
Extension for MAC/STING Adjustable fixing plates to
STING (2 pcs) - for 1
and LOOK rams be screwed
operator
GUIDE TO USE
600kg 600kg
500kg 500kg
400kg 400kg
300kg 300kg
leaf max weight
200kg 200kg
180kg
MAC/STING MAC/STING
0 1m 2m 3m 0 1m 2m 3m
1,8m
= MAC/24NET/E
If the leaf length is bigger than 2m or if you use reversible models you must install the electric-lock to block the gate in closed position. The height and the
leaf structure, as well as the presence of strong wind, can cause the reduction of the value of the data contained in table or make it necessary to use an
electric lock also for leafs shorter than 2m.
MAC / STING 20
LOOK
Electromechanical automation for swing gates
up to 5 m - 280 kg
21
Compatible with the Apps
All models have: adjustable fixing plates to be screwed included (art. MLS/SFR), rod cover not included
Control board to complete the installation: control board cod. 677610 art. NET230N/C (with box)
All models have: adjustable fixing plates to be screwed included (art. MLS/SFR), rod cover not included
Control board to complete the installation: control board cod. 678261 art. NET24N/C (with box)
Rod cover
TECHNICAL INFO 351/SC - 351EN/SC 355/SC - 355EN/SC 371/SC - 372/SC 373/SC - 374/SC 371E/SC
*the opening time of the leaf at 90° may be lower accordingly to the geometry of the installation
LOOK 22
DIMENSIONS FIXING PLATES
61 (MIN)
173 (MAX)
810 / 1130
1010 / 1530
Ø15
Ø10
61 (MIN)
129 (MAX)
88
25 120
Ø10
206 (MAX)
89 (MIN)
6
37,5 45 37,5
140 (MAX)
101 (MIN)
Ø10,5
110
=
75
75
35
=
84
95 95 120
t
e w
e
q e
r
e
q
r
q COD. 627012
Art. 351EN/SC
w COD. 677610
Art. NET230N/C
e COD. 662080
Art. LINEAR/XS
Electromechanical Universal digital control board for 1 Pair of mini synchronizable
automation for swing or 2 operators, 230V with or without photocell for outdoor installation.
gates magnetic encoder (with box) Maximum range 20m
KIT
KIT
COD. 672645
Art. GTI4 COD. 668010
Serialized white 4-channel remote
control, 433 MHz, with 3 coding: HCS Art. 127
Rolling-Code, Dip-Switch and new Warning sign
D.A.R.T. coding
23 LOOK
SPECIFIC ACCESSORIES
COD. 629312
Art. MLS/SFR
Adjustable fixing plates to
be screwed
GUIDE TO USE
800kg 800kg
600kg 600kg
400kg 400kg
leaf max weight
200kg 200kg
LOOK LOOK
0 1m 2m 3m 4m 5m 0 1m 2m 3m 4m 5m
If the leaf length is bigger than 2m or if you use reversible models you must install the electric-lock to block the gate in closed position. The
height and the leaf structure, as well as the presence of strong wind, can cause the reduction of the value of the data contained in table or make
it necessary to use an electric lock also for leafs shorter than 2m.
LOOK 24
OLI/N
Hydraulic automation for swing gates
up to 4,5 m - 500 kg
Models available with locks Available in short version Adjustable fixing plates to be
in opening and closing, (useful stroke 270mm) or screwed (optionals)
fast or slow speed versions long version (useful stroke
400mm)
NETLINK OPERATOR
This operator is compatible
with the NETLINK System
and can be programmed
with DEAInstaller and
NETBOX
25
Compatible with the Apps
Stroke 270mm
COD. OTHER CHARACTERISTICS
624005 OLI 602AN *** A 270mm • Self-locking in open position only, for leafs up to 2m length
624055 OLI 602LAN *** A 270mm • Self-locking in open position only, slow version, for leafs up to 2,5m length
624004 OLI 602N *** C 270mm • Self-locking in close position only, for leafs up to 2m length
624054 OLI 602LN *** C 270mm • Self-locking in close position only, slow version, for leafs up to 2,5m length
624013 OLI 603N *** 270mm • Self-locking in open and close position, for leafs up to 2m length
624063 OLI 603LN *** 270mm • Self-locking in open and close position, slow version, for leafs up to 2,5m length
624023 OLI 604N *** z 270mm • Not self-locking, for leafs up to 2,5m length
624073 OLI 604LN *** z 270mm • Not self-locking, slow version, for leafs up to 3m length
Stroke 400mm
COD. OTHER CHARACTERISTICS
624033 OLI 605N *** 400mm • Self-locking in open and closed position, for leafs up to 2,5m length
624083 OLI 605LN *** 400mm • Self-locking in open and closed position, slow version, for leafs up to 3m length
624043 OLI 606N *** z 400mm • Not self-locking, for leafs up to 3,5m length
624093 OLI 606LN *** z 400mm • Not self-locking, slow version, for leafs up to 4,5m length
624104 OLI 607AN *** A 400mm • Self-locking in open position, for leafs up to 3m length
624114 OLI 607LAN *** A 400mm • Self-locking in open position, slow version, for leafs up to 3,5m length
OLI 602N - OLI 602AN - OLI 605N - OLI 606N - OLI 602LN - OLI 602LAN - OLI OLI 605LN - OLI 606LN -
TECHNICAL INFO
OLI 603N - OLI 604N OLI 607AN 603LN - OLI 604LN OLI 607LAN
Motor power supply (V) 230V ~ ± 10 % (50/60 Hz)
OLI/N 26
GUIDE TO USE
1000kg
= 602N - 602AN - 603N
= 606N - 607LAN
250kg = 606LN
OLI
u
DIMENSIONS
130
t w 94 600 / 734 354 / 490
y
85
e 1048 / 1318
e
e FIXING PLATES
q r 30 30
15 15
15
15
y
Ø 12
Ø 10
e
q
125
125
r
55 10 55 10
rear front
COD. 672645
u COD. 661063 Art. GTI4 COD. 668010
Art. AURA230 Serialized white 4-channel remote
Art. 127
230V flashing light, LED, with control, 433 MHz, with 3 coding: HCS
Warning sign
integrated antenna, 433 MHz Rolling-Code, Dip-Switch and new
D.A.R.T. coding
SPECIFIC ACCESSORIES
COD. 629250
COD. 350360 COD. 629071
Art. 0/351 - 0/651 Art. OLI/SFR Art. COL 515
Anti-fall Stainless steel
Galvanized plate 100x70 Adjustable fixing plates to
cable with 2 holes for swing
mm be screwed
gates
27 OLI/N
GEKO
Electromechanical automation for swing gates
up to 2,5 m - 250 kg
Integrated mechanical
stops for open and
closed positions
NETLINK OPERATOR
This operator is compatible
with the NETLINK System
and can be programmed
with DEAInstaller and
NETBOX
28
Compatible with the Apps
• 1 operator
628000 GEKO * z NET24N • Mechanical stops
• Speed adjustment and slow down in opening and closing
All models have: arm not included. N.1 control board NET24N, mounting plate and limit switches included.
Max. 800 mm
700 mm
GUIDE TO USE
300kg
29 GEKO
EXAMPLE OF A TYPICAL INSTALLATION
y
DIMENSIONS (with arm art. GEKO/BA)
340
t e
69
170
35
e w
q e
270
35
r
38
w
50
e
q
r 400
KIT
e COD. 662080
Art. LINEAR/XS r COD. 664000 t COD. 663090
Art. GT-KEY
Pair of mini synchronizable Art. PILLY/60 Metal vandal proof keyswitch
photocell for outdoor 55cm column for photocell
installation. Maximum range (2 pcs) with two contacts, surface
20m mounted. Supplied with 2 keys.
KIT KIT
COD. 672645
y COD. 661083 Art. GTI4 COD. 668010
Art. AURA24 Serialized white 4-channel remote
Art. 127
24V flashing light, LED, with control, 433 MHz, with 3 coding: HCS
Rolling-Code, Dip-Switch and new Warning sign
integrated antenna, 433 MHz
D.A.R.T. coding
SPECIFIC ACCESSORIES
GEKO 30
LIVI 502
Electromechanical automation for swing gates
up to 4,5 m - 400 kg
31
Compatible with the Apps
All models have: arm not included. Horizontal mounting plates included.
Control board to complete the installation: control board cod. 677610 art. NET230N/C (with box)
All models have: arm not included. Horizontal mounting plates included.
Control board to complete the installation: control board cod. 678261 art. NET24N/C (with box)
LIVI 502 32
GUIDE TO USE
0 1m 2m 3m 4m 0 1m 2m 3m 4m 0 1m 2m 3m 4m
If the leaf length is bigger than 2m or if you use reversible models you must install the electric-lock to block the gate in closed position. The height and the leaf structure, as well
as the presence of strong wind, can cause the reduction of the value of the data contained in table or make it necessary to use an electric lock also for leafs shorter than 2m.
35
r
35 150
370
w
186 29
r q r
t
500
w r
q
53
t
600
KIT
r COD. 662080
Art. LINEAR/XS t COD. 664000 y COD. 663090
Art. GT-KEY
Pair of mini synchronizable Art. PILLY/60 Metal vandal proof keyswitch with
photocell for outdoor 55cm column for photocell two contacts, surface mounted.
installation. Maximum range (2 pcs) Supplied with 2 keys.
20m
KIT KIT
COD. 672645
u COD. 661063
Art. AURA230 Art. GTI4 COD. 668010
Serialized white 4-channel remote
230V flashing light, LED, control, 433 MHz, with 3 coding: HCS Art. 127
with integrated antenna, Rolling-Code, Dip-Switch and new Warning sign
433 MHz D.A.R.T. coding
33 LIVI 502
SPECIFIC ACCESSORIES
COD. 629330
Art. SD502
Junction box
800mm
800mm
50
185 860
570
min. 517mm
For installation dimensions refer to instructions manuals
LIVI 502 34
ANGOLO
Electromechanical automation for swing gates
up to 2,3 m - 200 kg
NETLINK OPERATOR
This operator is compatible
with the NETLINK System
and can be programmed
with DEAInstaller and
NETBOX
35
Compatible with the Apps
• 1 operator
626300 ANGOLO-24NET/1 * NET24N • Anti-crushing safety device
• Speed adjustment and slow down in opening and closing
All models have: arm and mounting plate not included. N.1 control board NET24N included.
min. 367 mm
min. 114 mm
800 mm
≥200 mm
700 mm
≥180 mm
≥500 mm
GUIDE TO USE
300kg If the leaf length is bigger than 1,5 meters or if you use reversible models you must
install the electric-lock to block the gate in closed position. The height and the leaf
structure, as well as the presence of strong wind, can cause the reduction of the
value of the data contained in table.
200kg
leaf max weight
100kg
= GEKO/BS
GHOST100
0
ANGOLO
1m 2m 3m
= GEKO/BA
leaf length
ANGOLO 36
EXAMPLE OF A TYPICAL INSTALLATION
t e
252
340
e
40
360
w
112
e
400
r
w
252
q e
106
r 114
PACK PACK
PACK
COD. 662080
e Art. LINEAR/XS r COD. 664000 t COD. 663090
Art. GT-KEY
Pair of mini synchronizable Art. PILLY/60 Metal vandal proof keyswitch
photocell for outdoor 55cm column for photocell
with two contacts, surface
installation. Maximum range (2 pcs)
mounted. Supplied with 2 keys.
20m
COD. 668010
Art. 127
Warning sign
SPECIFIC ACCESSORIES
COD. 381070
COD. 629260 COD. 629261
Art. GEKO/BS Art. 580L
Art. GEKO/BA Braccio a slitta in ferro
Horizontal mounting plate
Aluminium articulated arm (fastening of operator
verniciato
parallel to the gate)
COD. 629250
Art. COL 515
Anti-fall Stainless steel
cable with 2 holes for swing
gates
37 ANGOLO
GHOST 100
Electromechanical underground automation for swing gates
up to 3,5 m - 400 kg
Monobloc, aluminium
structure
Integrated mechanical
stops (standard)
Leaf opening up to 180° with Standard foundation box with NETLINK OPERATOR
art. 116GN cataphoresis treatment This operator is compatible
with the NETLINK System
Foundation box also available and can be programmed
in Stainless steel version with DEAInstaller and
NETBOX
38
Compatible with the Apps
621252 100/CL * • Underground operator with connection lever, mechanical stops and complete with 8m of cable
621253 100EN/CL * z • Underground operator with connection lever, mechanical stops, encoder and complete with 8m of cable
All models: foundation box not included. Mechanical limit switches included.
Control board to complete the installation: control board cod. 677610 art. NET230N/C (with box)
z For all models: cable L=8m
621262 100/24CL ** • Underground operator with connection lever, mechanical stops, encoder and complete with 8m of cable
All models: foundation box not included. Mechanical limit switches included.
Control board to complete the installation: control board cod. 678261 art. NET24N/C (with box)
z For all models: cable L=8m
GUIDE TO USE
600kg 600kg
If the leaf length is bigger than 2m or if you use reversible models you must install the electric-lock to block the gate in closed position. The height and the leaf
structure, as well as the presence of strong wind, can cause the reduction of the value of the data contained in table or make it necessary to use an electric
lock also for leafs shorter than 2m.
39 GHOST 100
EXAMPLE OF A TYPICAL INSTALLATION
u
DIMENSIONS
y 420 345
68
r e
225
r
qw t
r
r
qw t
q COD. 621253
Art. 100EN/CL
w COD. 629000
Art. 215 e COD. 677610
Art. NET230N/C
Foundation box with
Electromechanical Universal digital control board for 1
cataphoresis treatment
underground operator for or 2 operators, 230V with or without
complete with gate support
swing gates magnetic encoder (with box)
and unlocking device
KIT
COD. 663090
COD. 662080
r Art. LINEAR/XS t COD. 664000
y Art. GT-KEY
Metal vandal proof
Pair of mini synchronizable
photocell for outdoor Art. PILLY/60 keyswitch with two
55cm column for photocell (2 pcs) contacts, surface
installation. Maximum range
mounted. Supplied with
20m
2 keys.
KIT KIT
COD. 672645
u COD. 661063 Art. GTI4 COD. 668010
Art. AURA230 Serialized white 4-channel remote
Art. 127
230V flashing light, LED, with control, 433 MHz, with 3 coding: HCS
Warning sign
integrated antenna, 433 MHz Rolling-Code, Dip-Switch and new
D.A.R.T. coding
SPECIFIC ACCESSORIES
GHOST 100 40
GHOST 200
Electromechanical underground automation for swing gates
up to 4 m - 400 kg
New
Integrated mechanical
stops (optional)
Leaf opening up to 180° with Standard foundation box with NETLINK OPERATOR
art. 216GN cataphoresis treatment This operator is compatible
with the NETLINK System
Foundation box also available and can be programmed
in Stainless steel version with DEAInstaller and
NETBOX
41
Compatible with the Apps
621040 200CL ** • Underground operator with connection lever and complete with 8m of cable
621050 200/24CL *** • Underground operator with connection lever and complete with 8m of cable
GUIDE TO USE
800kg
600kg
If the leaf length is bigger than 2m or if you use
reversible models you must install the electric-lock
to block the gate in closed position. The height and
400kg
leaf max weight
GHOST200
0 1m 2m 3m 4m
leaf length
GHOST 200 42
EXAMPLE OF A TYPICAL INSTALLATION
u
DIMENSIONS
y 420 345
r e 68
225
r
qw t
r
r
t
qw
KIT
COD. 662080
r Art. LINEAR/XS t COD. 664000 y COD. 663090
Art. GT-KEY
Pair of mini synchronizable
photocell for outdoor
Art. PILLY/60 Metal vandal proof keyswitch
55cm column for photocell (2 pcs) with two contacts, surface
installation. Maximum range
mounted. Supplied with 2 keys.
20m
KIT KIT
COD. 672645
u COD. 661063
Art. GTI4 COD. 668010
Art. AURA230 Serialized white 4-channel remote Art. 127
230V flashing light, LED, with control, 433 MHz, with 3 coding: HCS Warning sign
integrated antenna, 433 MHz Rolling-Code, Dip-Switch and new
D.A.R.T. coding
SPECIFIC ACCESSORIES
COD. 629020
Art. 216
Device to be fixed into art.
215 e art. 215I to obtain an
opening angle of 180°
43 GHOST 200
COUNTERWEIGHT DOORS
Choose the operator suitable for your counterweight:
LIVI 902
• 1 operator up to 9m2 - 2 operators
over 9m2
• 230V
• Semi-intensive use
SELECTION GUIDE
Choose the garage door size in square meters
** z z 905NET/IP/BF
< 9m2 X1 230V
** z 902EN/IP/BF
** z z 905/24NET/BF
2
< 9m X1 24V
** z 902/24EN/BF
** z z 905NET/IP/BF
> 9m2 X2 230V
** z 902EN/IP/BF
** z z 905/24NET/BF
> 9m2 X2 24V
** z 902/24EN/BF
44
LIVI 902
Electromechanical automation for counterweight overhead doors
1 operator up to 9m² - 2 operators over 9m²
45
Compatible with the Apps
All 905 models: control board included art. NET230N. Fixing plate not included.
All 902 models: control board and fixing plate not included.
Control board to complete the installation: control board cod. 677610 art. NET230N/C (with box)
LIVI 902 46
EXAMPLE OF A TYPICAL INSTALLATION WITH 1 OPERATOR
u
DIMENSIONS
t q
t
e e
r
r
w
675
i y
y
166 142
r COD. 639570
Art. 955V
t COD. 639140 y COD. 662080
Art. LINEAR/XS
Pipe support Ø=40.5mm for art.
Art. 950V Pair of mini synchronizable
Telescopic straight arm to
950V, 950VR and 951V (to be be screwed, right and left photocell for outdoor installation.
screwed) Maximum range 20m
COD. 672645
u COD. 661063 Art. GTI4 COD. 639100
Art. AURA230 Serialized white 4-channel remote Art. 960C
230V flashing light, LED, with control, 433 MHz, with 3 coding: HCS Hole cover with key for
integrated antenna, 433 MHz Rolling-Code, Dip-Switch and new external unlocking
D.A.R.T. coding
47 LIVI 902
EXAMPLE OF A TYPICAL INSTALLATION WITH 2 OPERATORS
w
u
t q
t
r e e
r
i
y
y
Order 2pcs
q COD. 633414
Art. 905NET/IP/BF
w COD. 633353
Art. 902EN/IP/BF
e COD. 639160
i COD. 667051
Art. SOFTP
COD. 639100
COD. 668010
Safety rubber profile (complete
Art. 960C Art. 127
Hole cover with key
with aluminium base) useful to for external unlocking Warning sign
reduce the impact forces (24m)
LIVI 902 48
SPECIFIC ACCESSORIES
COD. 667051
COD. 639100
Art. 960C Art. SOFTP
Safety rubber profile (complete
Hole cover with key for
with aluminium base) useful to
external unlocking
reduce the impact forces (24m)
49 LIVI 902
SECTIONAL AND COUNTERWEIGHT SPRING DOORS
Choose the operator for your garage door:
SELECTION GUIDE
Choose the maximum size in square meters of the sectional door
ADVANCE
SPACE
ADVANCE/XL
SPACE/XL
50
ADVANCE
Automation for sectional and counterweight spring doors
up to 16m²
NETLINK OPERATOR
This operator is compatible
with the NETLINK System
and can be programmed
with DEAInstaller and
NETBOX
Two channel
encoder
Reinforced belt with
steel core Standard rail with interlocking
system 3200mm (art. AB16)
51
Compatible with the Apps
All models: control panel with box for wall mounting and 1 transmitter art. GTI4 included. Track not included.
COD. CHARACTERISTICS
Speed (cm/s) 17 16
w
q
≥ 150 mm
e
≥ 5 mm
≥ 5 mm
q
r
r
ADVANCE 52
STANDARD SIDE INSTALLATION DIMENSIONS
w q
e 290
117
72
100
r
r
SPECIFIC ACCESSORIES
COD. 639321
COD. 639350 COD. 639340
Art. 723 Art. 721/AB Art. 722
Unlocking device by cable
Arm adaptor for Arm to be used with
(4m). To be used with art.
sectional doors counterweight doors
BLINDOS
0,5mm2
0,5mm2
COD. 665000 COD. 639371
COD. 639600
0,5mm2
Art. PLUG CABLE/ADV Art. BLINDOS Art. 761C
0,5mm2 Aluminium safety enclosure, with Unlocking device by
1,5mm2 Multi-section shielded cable for European cylinder, ready for
ADVANCE L=5m cable complete with hole
1,5mm2 unlocking device by cable. cover lock
COD. 639322
Art. 721D
External unlocking device
for ADVANCE/SPACE
53 ADVANCE
SPACE
Sectional and counterweight spring doors
up to 16m²
NETLINK OPERATOR
This operator is compatible
with the NETLINK System
and can be programmed
with DEAInstaller and
NETBOX
54
Compatible with the Apps
For all models: control panel and 1 transmitter art. GTI4 included. Track not included.
* SPACE/XXL: art. AB/FM included
COD. CHARACTERISTICS
Speed (cm/s) 17 16 13
55 SPACE
EXAMPLE OF A TYPICAL INSTALLATION
q
w
e DIMENSIONS
124
130
250
r r
400
r COD. 662080
Art. LINEAR/XS
e COD. 661083
SPECIFIC ACCESSORIES
COD. 665000
COD. 639322
Art. BLINDOS Art. 721D
Aluminium safety enclosure, with
European cylinder, ready for External unlocking device
unlocking device by cable. for ADVANCE/SPACE
SPACE 56
TEO 700
Sectional and counterweight spring doors
up to 9m²
Thrust 1000N
57
24V ⎓ operators with control board incorporated and encoder
Set complete with: steel track and chain, L=3.300 mm (1 piece) and 1 art. GTI2 transmitter
Speed (m/min) 9
TEO 700 58
EXAMPLE OF A TYPICAL INSTALLATION
q
w
DIMENSIONS
e 3360
165
218
r r
q COD. 672635
Art. GTI2
1 operator TEO 700 Steel track Serialized white 2-channel remote
- 24V With chain L=3.300 mm control, 433 MHz, with 3 coding: HCS
Rolling-Code, Dip-Switch and new
D.A.R.T. coding
SPECIFIC ACCESSORIES
COD. 639371
COD. 639580
Art. TEO EXTENSION Art. 761C
External unlocking device
Extension for chain track L=1000
complete with a hole
mm
cover lock
59 TEO 700
INDUSTRIAL SECTIONAL DOORS
Choose the operator for your industrial sectional door:
SELECTION GUIDE
Choose the maximum size in square meters of the sectional door
z z LATO220NET
z z LATO220NET/C
<17m2 230V 62Nm 22,4 **
z LATO220/EN
z LATO220/CEN
z z LATO220NET
17m2
z z LATO220NET/C
÷ 230V 124Nm 11,2 **
20m2
z LATO220/EN
z LATO220/CEN
LATO400EN
<23m2
400V 104Nm 22,4 *** z
LATO400CEN
LATO400EN
23m2
÷ 400V 208Nm 11,2 *** z
35m2
LATO400CEN
60
LATO
Automations for industrial sectional doors
up to 35m²
Quick installation
thanks to the
integrated control
board
NETLINK OPERATOR
This operator is compatible
with the NETLINK System
and can be programmed
with DEAInstaller and
NETBOX
Available in 230V AC ou
400V AC
61
Compatible with the Apps
(only NET230N)
• Limit switches
• Anti-crashing safety device
For shaft
637050 LATO220NET ** NET230N
Ø 25,4mm z • Magnetic encoder with 6m long cable
• Integrated receiver and courtesy light
• Unlocking device by cable
• Limit switches
• Anti-crashing safety device
For shaft • Magnetic encoder with 6m long cable
637051 LATO220NET/C* ** NET230N
Ø 25,4mm z • Integrated receiver and courtesy light
• Unlocking device by cable
• Emergency manual manouvre by chain
• Limit switches
For shaft
637001 LATO220EN ** z Ø 25,4mm
• Magnetic encoder with 6m long cable
• Unlocking device by cable
• Limit switches
For shaft • Magnetic encoder with 6m long cable
637011 LATO220CEN* ** z Ø 25,4mm • Unlocking device by cable
• Emergency manual manouvre by chain
Control board to complete the installation: control board cod. 677610 art. NET230N/C (with box)
All models: 1 side fixing plate art. LE included
400V AC operators without control board, with limit switches and encoder
LATO 62
TECHNICAL INFO 220NET - 220/EN - 220/CEN - 220NET/C 400EN - 400CEN
Motor power supply (V) 230V ~ ± 10 % (50/60 Hz) 400V AC ± 10 % (50/60 Hz)
Protection level IP40 (IP10 models 220/CEN - 220NET/C) IP40 (IP10 model 400/CEN)
q DIMENSIONS
266
55
415
360
w
122
e e
32
2
4
10
q COD. 637011
Art. LATO220/CEN
w COD. 677610
Art. NET230N/C
w COD. 679180
Operator for industrial sectional Universal digital control board for 1 Art. 100GP
doors with chain for manual or 2 operators, 230V with or without Buttons wired cover
manouvre magnetic encoder (with box)
e COD. 662044
Art. LINEAR
r COD. 661063 COD. 668010
Pair of adjustable photocells Art. AURA230 Art. 127
(180°) with possibility of 230V flashing light, LED, with
Warning sign
syncronized operating. Range integrated antenna, 433 MHz
20m
63 LATO
SPECIFIC ACCESSORIES
LATO 64
LIVI 550PL
Automations for industrial folding doors
NETLINK OPERATOR
This operator is compatible
with the NETLINK System
and can be programmed
with DEAInstaller and
NETBOX
65
Compatible with the Apps
For models: Control board and telescopic arm not included. Unlocking device with cable (4m) included
Control board to complete the installation: control board cod. 677610 art. NET230N/C (with box)
* To comply with standars EN 13241-1, it is compulsory to use the external safety devices in compliance with standards EN 12978.
e
DIMENSIONS
q
37
102
t
37
r
124,5
w
398,5
LIVI 550PL 66
TECHNICAL INFO 550PL - 550PLEN
SPECIFIC ACCESSORIES
COD. 639540
COD. 629190 COD. 639111
Art. 560BT Art. 550PL/SF
Art. 560F - 5m unlocking device
Reinforced galvanized
960F by wire (to be used
steel telescopic arm with
Limit switches set with art. LATOM or
splined bushing
BLINDOS)
COD. 665000
Art. BLINDOS
Aluminium safety enclosure, with
European cylinder, ready for
unlocking device by cable.
67 LIVI 550PL
WILL-G
Universal operator for balanced roller shutters
With electrobrake
Thrust up to 1400N
68
230V ~ operators without control board
Motor power supply (V) 230V ~ ± 10 % (50/60 Hz) Motor thermal protection (°C) 160°
Built-in capacitor (μF) 12,5 Maximum clear opening (number of pulley turns) 8
DIMENSIONS
q
58
27 220
60
e
355
q COD. 634020
w COD. 677540
Art. 211ER/C e COD. 663091
Art. GT-KEY/SB
Control panel (with box 100A) for the Aluminium key switch with two keys
Art. WILL-G/140 SE automation of 230V operators for
Operator for 140kg roller shutter and unlocking device by cable.
roller shutters with built in 433MHz. Note:unlocking function to be used with
radio receiver operators for WILL-G roller shutter
69 WILL-G
ELECTROMECHANICAL BARRIER AND BOLLARD
Choose the barrier or the bollard suitable for your entrance:
SELECTION GUIDE
Choose the maximum boom length
4m 24V 6” ** z PASS24NET/L
5m 24V 6” ** z PASS24NET/L
230V 8” ** z STOPNET/L
6m
8m
24V 7,5” *** z STOP24NET/L
70
PASS
Electromechanical barrier
up to 5m of boom length
Robust anti-vandal
steeling enclosure,
opening on the left
or on the right side
NETLINK OPERATOR
This operator is compatible
with the NETLINK System
and can be programmed
with DEAInstaller and
NETBOX
71
Compatible with the Apps
• Speed adjustment during normal cycle and slow down in opening and
closing
644022 PASS24NET/VR 4 m fast ** NET24N z • Motor control by encoder and obstacle detection
• Possibility to lock the programming to prevent tampering
All models: flashing lights, boom, boom holder and foundation plate not included - Stainless steel version: available on request
All models: Proper functioning is guaranteed with perfect balance of the spring and adjustment of slow down
ATTENTION: you must use 1 control board NET24N with every barrier
1 X STRIP-LED/P 1 x STRIP-LED
max 8m
cod. 649173 cod. 649174
PASS 72
DIMENSIONS
76
1162
803
EXAMPLE OF A TYPICAL INSTALLATION
w
q
r
r
t
q COD. 644020
w COD. 649140
Art. PASS3
e COD. 649181
Art. CLED24
Art. PASS24NET/V DEA rectangular painted boom Flashing light circuit 24V for STOP
Electromechanical barrier 3000x65x38mm, with reflective and PASS barriers (to be installed
stickers art.1012 under the barrier cover)
r COD. 662044
Art. LINEAR t COD. 664000 COD. 649160
Pair of adjustable photocells Art. PILLY/60
(180°) with possibility of
Art. BSF
55cm column for photocell (2 pcs) Bracket for LINEAR photocells
syncronized operating. Range
20m
COD. 672645
COD. 381744 COD. 649073 Art. GTI4
Art. OMPASS Art. PASS/B Serialized white 4-channel remote
Boom holder for DEA booms control, 433 MHz, with 3 coding: HCS
Foundation plate Rolling-Code, Dip-Switch and new
art. PASS3 and art. PASS4
D.A.R.T. coding
73 PASS
SPECIFIC ACCESSORIES
COD. 649240
COD. 381741
Art. PASS5 COD. 649250
DEA painted lightweight boom Art. OMPASS60
5000x80x40mm, without reflective
Art. OMPASS5 Boom holder for
Boom holder and fixing counter- commercial boom
stickers. To be used only with art.
plate for DEA boom art. PASS5 60x30mm
PASS24NET/L (not compatible with
other accessories)
Not compatible with other accessories or with the front plastic cover of the boom holder
COD. 321810
COD. 681035 COD. 649160
Art. SMFLED24/2 Art. GSOFTP Art. BSF
Black rubber profile, EPDM
24V led traffic light: red-green lights Bracket for Linear photocells
S65 (24m)
COD. 649200
Art. BAT/PASS COD. 101004
COD. 649073
Batteries set for PASS Art. 1012
barriers consisting of 2 x Reflective red stickers Art. PASS/B
4Ah batteries, fixing plates (1 pcs) Foundation plate
and connecting cables
PASS 74
STOP
Electromechanical barrier
up to 8m of boom length
Robust anti-vandal
steeling enclosure,
opening on the left
or on the right side
NETLINK OPERATOR
This operator is compatible
with the NETLINK System
and can be programmed
with DEAInstaller and
NETBOX
75
Compatible with the Apps
All models: flashing lights, boom, boom holder and foundation plate not included. Stainless steel version: available upon request
All models: proper functioning is guaranteed with perfect balance of the spring and adjustment of slow down
All models: flashing lights, boom, boom holder and foundation plate not included. Stainless steel version: available upon request
Warning: proper functioning of this model is guaranteed with perfect balance of the spring and adjustment of slow down
ATTENTION: use a NET24N control unit for each barrier.
Boom length 4 ÷ 6m 6 ÷ 8m 4m 4 ÷ 6m 6 ÷ 8m
STOP 76
L MAX = 8m
The number of KIT MOLLA (cod. 649220) is different depending on the type of accessories to be mounted on the boom.
The table at page 100 illustrates the number of kits required for different situations.
1 X STRIP-LED/P 1 x STRIP-LED
max 8m
cod. 649173 cod. 649174
77 STOP
DIMENSIONS
98
1288
830
EXAMPLE OF A TYPICAL INSTALLATION
w r
e
q
t
y
q COD. 645021
w COD. 649261 e COD. 649000
Art. STOP6/N
Art. STOP24NET/L DEA round painted boom Art. 1006
Electromechanical barrier 6125xØ80mm, with reflective Mobile boom support
red stickers art. 1012
r COD. 649181
Art. CLED24
t COD. 662044
Art. LINEAR y COD. 664000
Flashing light circuit 24V for Pair of adjustable photocells
STOP and PASS barriers (to (180°) with possibility of
Art. PILLY/60
55cm column for photocell (2 pcs)
be installed under the barrier syncronized operating. Range
cover) 20m
COD. 649270
Art. OMSTOP/N COD. 649072 COD. 649160
Boom holder for DEA booms Art. STOP/B Art. BSF
art. STOP4/N and art. Foundation plate Bracket for LINEAR photocells
STOP6/N
COD. 672645
COD. 321810
Art. GTI4 COD. 668010
Art. GSOFTP Serialized white 4-channel remote
Art. 127
Black rubber profile, EPDM S65 control, 433 MHz, with 3 coding: HCS
(24m) Warning sign
Rolling-Code, Dip-Switch and new
D.A.R.T. coding
STOP 78
SPECIFIC ACCESSORIES
COD. 649173
COD. 649262 COD. 649174
Art. STOP-JOINT Art. STRIP-LED Art. STRIP-LED/P
Power adapter and fixing
Joint for boom (art.STOP4/N Led strip for arms (L=8m) plates for art. STRIP-LED
and art. STOP6/N) without power adapter (840mA - IP67)
COD. 649201
COD. 667061 COD. 321810 Art. BAT/STOP
Art. LOOP 230/1 Art. GSOFTP Batteries set for STOP barriers
Black rubber profile, EPDM complete with 2 x 4Ah batteries,
Loop detector, 1 channel
S65 (24m) fixing plates and connecting
cables
PHASE OUT
COD. 649030
COD. 649010
Art. 1008 COD. 386390
Art. 1004 Rectangular boom
Folding bar joint 100x30mm to be used Art. 1005
4000x100x30 mm to be used Aluminium skirt 2m long
with art. 1008. Not compatible with
with art. 1004 with stickers
STOP24NET/V
art. 1012
Add at least 1 KIT MOLLA. Not compatible with skirt art. 1005.
79 STOP
ROCK
Hydraulic pump integrated in
Hydraulic retractable bollard the top section, to assist with
height 700 mm maintainance activites
NETLINK OPERATOR
This operator is compatible
with the NETLINK System
and can be programmed with
DEAInstaller and NETBOX
80
Compatible with the Apps
Fixed bollard
Height 700 mm
-15°C + 50°C
Operating temperature
-25°C + 50°C with heater
Capacitor 12,5 µF
81 ROCK
DIMENSIONS
Reflective band
55
Led
700
274
1025
450
450
ELECTRICAL DIAGRAM
3x0,5 mm²
B B
4x1,5 mm² (230V) - 14x0,5 mm²
4x1,5 mm² (230V) - 14x0,5 mm²
COD.
677610 NET230N/C
677611 NET230N/PROBOX
art. art. art.
677620 NET-EXPANSION NET230N/C NET-EXPANSION NET-EXPANSION MINI
ROCK 82
EXAMPLE OF A TYPICAL INSTALLATION
q q
q COD. 651000
w COD. 677611
Art. NET230N/PROBOX COD. 679210
Art. ROCK NET230 control board mounted on Art. STEELBOX
Hydraulic retractable bollard plate with cable holders and DIN rail Painted steel box with key lock
to use on art. STEELBOX
SPECIFIC ACCESSORIES
COD. 677622
COD. 659070
Art. NET-EXPANSION MINI COD. 659060
Mini expansion board, 4 resistive input Art. ROCK/B Art. ROCK/RE
and 1 NC-NO output, compatible only Framework for bollard art.
Antifreeze heater
with NET24N and NET230N ROCK Ø=273 h=700mm
COD. 681035
Art. SMFLED24/2
24V led traffic light: red-green lights
83 ROCK
220H
Recessed mini control board - receiver
Domotics is brought to in your home with this new mini control board, fully custom- Extremely compact in size, this mini control board can be fitted anywhere. From a
izable to automate any home-automation device. Commands may be sent by radio single multi-channel transmitter it is possible to activate each control board inde-
or by wire (buttons or switches). pendently or in a centralized way.
Shutters, awnings, lights, electric locks, irrigation systems, etc., can be automated
easily and fast.
COMPATIBLE TRANSMITTERS
Remote control
Multi-channel
TR-PLUS
Remote controls
standard remotes 2ch - 4ch
Dip-switch or HCS*
GTI2 GTI4
COD. DESCRIPTION
Storage temperature -40 ÷ +100°C Supply voltage (VAC – 50/60Hz) 100V 250V
Start-up time 2s
84
NETLINK devices
and accessories
RECEIVERS ................................................................................................ 95
KEYPAD ...................................................................................................... 95
KEYSWITCHES .......................................................................................... 96
86
NET-BOX
A management device for the professional installer, that allows
you to easily manage remotes and NET control boards
87
DEAinstaller
DEAuser
88
NETLINK DEVICES
COD. DESCRIZIONE
NET-BOX 470351 GT-CABLE Cable to be used with NETBOX for programming compatible remotes
Cable to connect NET-NODE and NET-BOX with NET control boards and
397227 NET-CABLE receivers, L= 2 m
NET-NODE
Card with serial code to upgrade your account to “Premium”. It allows you to
679113 PREMIUM CARD share the data of the installations with max 10 smartphones.
PREMIUM CARD
89
GTI
New remotes, packed in serialized sequence
D.A.R.T.
DEA Advanced Rolling Transmission
90
REMOTE CONTROLS
HCS rolling-code**
CR2032 lithium
672635 GTI2 433,92 MHz 250-300m* Dip-Switch 2
battery
D.A.R.T.**
HCS rolling-code**
CR2032 lithium
672645 GTI4 433,92 MHz 250-300m* Dip-Switch 4
battery
D.A.R.T.**
HCS rolling-code**
CR2032 lithium
672637 GTI2/868 868 MHz 250-300m* Dip-Switch 2
battery
D.A.R.T.**
HCS rolling-code**
CR2032 lithium
672647 GTI4/868 868 MHz 250-300m* Dip-Switch 4
battery
D.A.R.T.**
HCS rolling-code**
CR2032 lithium
672636 GTI2N 433,92 MHz 250-300m* Dip-Switch 2
battery
D.A.R.T.**
HCS rolling-code**
CR2032 lithium
672646 GTI4N 433,92 MHz 250-300m* Dip-Switch 4
battery
D.A.R.T.**
CLONABLE REMOTES
HCS rolling-code**
CR2032 lithium
672603 GTI2M 433,92 MHz 250-300m* Dip-Switch 2
battery
D.A.R.T.**
HCS rolling-code**
CR2032 lithium
672613 GTI4M 433,92 MHz 250-300m* Dip-Switch 4
battery
D.A.R.T.**
WALL SUPPORT
COD. DESCRIPTION
91
CONTROL BOARDS RANGE DE@NET
To automate gates and installations in compliance with the European Safety Rules EN 12453-EN12445
COD. DESCRIPTION
Universal digital control board with box (100G) for 1 or 2 operators, 230V ~, with or
without magnetic encoder.
Selection in a single step of the type of operator used (sliding, swing, counter-
weight door, barrier, sectional door, bollard), with automatic configuration all inputs/
outputs and best operating options. Factory configured as a swing.
Simplified learning procedure. 433 MHz radio receiver for up to 100 remote con-
trols ( fixed or rolling code coding).
(180xh265x90mm)
NET230
PROBOX
677600 NET230N Circuit only
NET230N/ NET230 control board mounted on plate with cable holders and DIN rail to use on
677611
PROBOX art. STEELBOX
COD. DESCRIPTION
Universal digital control board with box (100GR) for 1 or 2 operators 24V ⎓, with or
without magnetic encoder.
Selection in a single step of the type of operator used (sliding, swing, counter-
weight door, barrier, sectional door, bollard), with automatic configuration all inputs/
outputs and best operating options. Factory configured as a swing.
(180xh265x130mm)
678263 NET24N/C250 NET24N with 250W transformer for use with REV operators ready for IRON BOX
NET24N
PROBOX
678251 NET24N Circuit only
NET24 control board with transformer mounted on plate with cable holders and
678264 NET24N/PROBOX DIN rail to use on art. STEELBOX
COD. DESCRIPTION
678271 NET724N Control board for ADVANCE and SPACE operators (without box, only circuit)
Control board ADVANCE/XL, SPACE/L, SPACE/XL and SPACE/XXL (without box,
678281 NET724N/XL only circuit)
New features can be activated in the NET control board including: analog or
resistive inputs, traffic light control, compass control, alarm contact with automatic
677620 NET-EXPANSION closing when the power failure, open gate warning light with variable frequency in
opening/closing (cable length 300mm + spacers).
Compatible only with DE@NET boards with serial port (NET230N and NET24N
from the version 30, NET724N from version 1 and NET724N/XL).
NET-EXPANSION Mini expansion board, 4 resistive input and 1 NC-NO output, compatible only with
677622
MINI NET24N and NET230N
NET-EXPANSION NET-EXPANSION
MINI 677621 NET-EXPANSION/C NET-EXPANSION expansion board with box and 1000 mm cable
92
DEVICES FOR DE@NET CONTROL BOARD
COD. DESCRIPTION
Device for data backup of the NET control boards (radio memory and program-
ming parameters), with USB interface; the USB interface together the manage-
ment software MEMONET allows you to share the data on your PC for multiple
677630 MEMONET installations and if necessary to copy them onto a new control board.
Compatible only with DE@NET boards with serial port (NET230N and NET24N
from the version 30, NET724N from version 1).
COD. DESCRIPTION
Digital control board three-phase 400V AC (with box 100G) for 1 operator with encoder
control. It is complete with anti-crushing safety device, integrated 433 MHz radio receiv-
677140 400RR/C er, speed adjustment during normal cycle and slow down in opening and closing, force
adjustment up to 70 levels and separate in open and close, anti-inertia braking device.
400RR/C
400RR/ NET400RR control board mounted on plate with cable holders and DIN rail to use on
677141
PROBOX art. STEELBOX.
400RR PROBOX
COD. DESCRIPTION
Control board (with 100G box) for 1 or 2 230V ~ operators, complete with 433 MHz ra-
677120 212E/C dio receiver, automatic operating time learning, electronic force adjustment, controlled
input for external safety device.
COD. DESCRIPTION
Control panel (with 100A box) for the automation of 230V ~ operators for roller shutters.
677540 211ER/C Selectable operating logic (step by step, separated open/close, dead man command)
programmable working times, with built-in 433MHz radio receiver.
COD. DESCRIPTION
Timed contact to use with electromagnets and/or for other generic uses (courtesy light,
677560 SSE12/C traffic lights, etc.) in 100A box and with built-in 433 MHz radio receiver.
93
SOLAR POWER SYSTEM
SOLAR Solar panel 30Wp with possibility to install up to 2 panels (wall fixing plate included).
681054
PANEL/XL (390x660x25mm)
Consult the manual for sizing the number of panels depending on the daily solar radiation throughout the year.
SOLAR PANEL/XL
COD. DESCRIPTION
629290 BAT Rechargeable batteries kit for 24V operators, 12V - 1,2Ah, complete with wiring cables
BAT BAT/LIVI Rechargeable batteries kit for LIVI/N 24V operators, 12V - 1,2Ah, complete with wiring
629291
3-6-9/24 cables and fixing plate
BAT/LIVI/N
629292 Support for LIVI/N batteries with fixing screws
SUPPORT
Batteries set for PASS barriers complete with 2 x 4Ah batteries, fixing plates and
649200 BAT/PASS connecting cables
Batteries set for STOP barriers complete with 2 x 4Ah batteries, fixing plates and
BAT/LIVI 649201 BAT/STOP connecting cables
3-6-9/24
639590 BAT/ADV Batteries set for ADVANCE
BAT/ADV
679130 100A 679060 100G 679070 100GR 679180 100GP 679140 100GG
94
RECEIVERS
COD. DESCRIPTION
Hardwired 2 channels receiver 433 MHz with capacity to store 1000 transmitters
and button assignment independently for each transmitter and relay. Power 24V
675602 281/2 AC/DC, maximum contact rating 0,5A/30Vdc, supplied with box art.100F (for
indoor installation)
Hardwired 2 channels receiver 868 MHz with capacity to store 1000 transmitters
and button assignment independently for each transmitter and relay. Power 24V
675603 281/2/868 AC/DC, maximum contact rating 0,5A/30Vdc, supplied with box art.100F (for
indoor installation)
Hardwired 2 channels receiver 433 MHz with capacity to store 1000 transmitters
and button assignment independently for each transmitter and relay. Power 12V
675604 281/2/12V AC/DC, maximum contact rating 0,5A/30Vdc, supplied with box art.100F (for
indoor installation)
RECEIVERS ACCESSORIES
COD. DESCRIPTION
679160 100F Box for radio receiver art. 281/2 (5-piece pack)
100F
COD. DESCRIPTION
Box with built-in antenna for hardwired radio receivers art. 281/2 for external
679010 BOX/A
use
240-240E
KEYPAD
COD. DESCRIPTION
Wireless keypad
663280 DIGIRAD (74,5xh112x40mm)
PUSH-BUTTON KEYPAD
COD. DESCRIPTION
663400 PULSY Push button panel open (N.O.) / close (N.C.)IP40 - Max 1 A
ACCESS CONTROL
COD. DESCRIPTION
95
KEYSWITCHES
COD. DESCRIPTION
102LUX
Metal vandal proof keyswitch with two contacts,
663090 GT-KEY surface mounted. Supplied with 2 keys.
(55xh102x70mm)
GT-KEY/I
COD. DESCRIPTION
COD. DESCRIPTION
BSF COVER
COD. DESCRIPTION
COD. DESCRIPTION
FLASHING LIGHTS
COD. DESCRIPTION
New: Cable
L=5m
230V ~ flashing light LED, with integrated antenna, 433 MHz, cavo L=5m
661063 AURA230 (85xh140x42mm)
24V ⎓ flashing light LED, with integrated antenna, 433 MHz, cavo L=5m
661083 AURA24 (85xh140x42mm)
Flashing light circuit 230V ~ for STOP barriers (to be installed under the
649180 CLED230 barrier cover)
Flashing light circuit 24V ⎓ for STOP and PASS barriers (to be installed
649181 CLED24 under the barrier cover)
CLED230 CLED24
COD. DESCRIPTION
136006 110V Vertical electric lock 12V (without European cylinder) with ground selvage
D
136004 M Half European cylinder
M
Horizontal electric lock complete with double cylinder and horizontal selvage,
136044 110OI adjustable, galvanized
110O 110OI
Plate roof for horizontal electric lock (supplied with plate for horizontal
136042 T-O selvage)
97
SAFETY DEVICES AND ACCESSORIES
35
PASSIVE EDGES
50
COD. DESCRIPTION
30
Safety rubber profile (complete with aluminium base) useful to reduce the
SOFT3 667053 SOFT3 impact forces for sliding and swing gates (12m)
9
21
23
Black rubber and aluminium profile useful to reduce the impact forces for
667051 SOFTP overhead doors (24m)
SOFTP
26
23
GSOFTP
MECHANICAL SAFETY EDGES
COD. DESCRIPTION
COD. DESCRIPTION
Mechanical edge L= 1,2 m for overhead door (supplied without side cups
171002 130 134D and 134S)
Mechanical edge L= 1,8 m for overhead door (supplied without side cups
131
26
171003
134D and 134S) 134D and 134S)
42,5
667030 134 Cups for left side closing for edge 130/131 (10 pcs)
* Resistive and conductive edges should be installed in combination with the board art. 135/2 to comply
with the Norms EN12978
37
171045 CC-25 Conductive safety edge 8.2 KΩ L=2,5m
* Resistive and conductive edges should be installed in combination with the board art. 135/2 to comply
with the Norms EN12978
COD. DESCRIPTION
98
SAFETY DEVICES AND ACCESSORIES
COD. DESCRIPTION
COD. DESCRIPTION
COD. DESCRIPTION
Wireless transmitter and receiver kit in 868 MHz, for resistive or me-
672920 D-BAND-KIT chanical safety edges
99
STOP + KIT MOLLA
SINGLE BOOM
L / KIT MOLLA
4m z z
STOP24NET/V
1
z z z
z
z z
6m 1
z z
z z z
2xBOOM + STOP-JOINT
L / KIT MOLLA
z z
z
z z
6m 1
z z z
z z
z z z
- - - - 1
z
z z
z
z z
7m 2
z
z z
z z z
z z
z z z 3
- - - - 1
z
z z
z
7,5m 2
z z
z
z z
z z z 3
- - - -
2
z
z
8m
z z
3
z z
z z z
100
HEADQUARTER
INTERNATIONAL SUBSIDIARIES
FRANCE
> HEAD OFFICE
DEA SYSTEM S.A.R.L. DEA SUD-OUEST SAS
220, rue Ferdinand Perrier - Parc Annapurna - 69800 Saint Priest - FRANCE 6, Chemin du Chapitre - Z.I. Thibaud - 31100 Toulouse - France
q + 33.(0)4.78.90.32.04 - p + 33.(0)4.78.90.32.98 q + 33.(0)5.62.48.80.40 - p + 33.(0)5.62.48.97.65
[email protected] - www.deasystem.fr [email protected] - www.deasudouest.fr
DEA ATLANTIQUE Sarl – AGENCE NORD OUEST DEA SUD-OUEST SAS - AGENCE AQUITAINE
q +33.4.78.90.32.04 - p +33 4.78.90.32.98 2, rue Gaspard Monge - Z.I. Bersol - 33600 Pessac - France
[email protected] - www.deasystem.fr q + 33.(0)5.57.02.09.29 - p + 33.(0)5.57.93.05.23
[email protected]
DEA SYSTEM FRANCE GRAND SUD SAS
17, rue Odette Jasse - 13015 Marseille DEA LANGUEDOC-ROUSSILLON
q + 33.(0)4.84.25.33.33 - p + 33.(0)4.91.98.53.84 276, rue Jean Baptiste Calvignac - ZAE la biste 2
[email protected] - www.deasystem.fr 34670 Baillargues - France
q +33.(0)4 99 74 56 47
[email protected] www.dea-lr.fr
UNITED KINGDOM
> HEAD OFFICE
DEA GATE AUTOMATION Ltd. DEA GATE AUTOMATION Ltd.
Sandholes Road - Cookstown - Co. Tyrone Unit 31 - The IO Centre - Hearle Way - Hatfield - Hertfordshire
BT80 9AR - NORTHERN IRELAND AL10 9EW - GREAT BRITAIN
q+ 44 (0)28 8676 6476 - p + 44 (0)28 8676 2414 q+ 44 (0)17.07.24.65.99
[email protected] - www.deasystem.co.uk [email protected] - www.deasystem.co.uk
GERMANY POLAND
DEA Torantriebe GmbH DEA POLSKA Sp. z.o.o.
Sattlerstraße, 7 - D-85229 Markt Indersdorf Ul. Imielinska 32a - 41-407 Imielin - POLAND
q + 48.32.627.12.77
q +49.8136 8089161 - p +49.8136 8089163 [email protected] - www.deapolska.pl - www.deasystem.pl
[email protected] - www.dea-torantriebe.de
SPAIN
DEA SYSTEM S.L.
C/ Industria, 20 - 08184 Palau - Solità i Plegamans - Barcelona - SPAIN
q + 34.902.33.00.32 - p + 34.93.866.76.53
[email protected] - www.deasystem.es
move as you like
DEA SYSTEM S.p.A.
Via della Tecnica, 6 - 36013 Piovene Rocchette (VI) - ITALY
q+ 39.0445.55.07.89 - p + 39.0445.55.02.65
[email protected] - www.deasystem.com
cod. 693301-19