Eosrt3 Eos1100d Im2 C en
Eosrt3 Eos1100d Im2 C en
C O
E
The “Software Start Guide” and “Quick Reference Guide” are INSTRUCTION
provided at end of this manual. MANUAL
Introduction
The EOS REBEL T3/1100D is a high-performance, digital single-lens
reflex camera featuring a fine-detail CMOS sensor with approx. 12.2
effective megapixels, DIGIC 4, high-precision and high-speed 9-point
AF, approx. 3 fps continuous shooting, Live View shooting, and High-
Definition (HD) movie shooting.
The camera is highly responsive for shooting at anytime, provides many
functions fitted for advanced shooting, and offers many other features.
Y
Warnings” (p.259, 260) and “Handling Precautions” (p.14, 15).
O P
Testing the Camera Before Use and Liability
After shooting, playback and check whether the images have been
C
properly recorded. If the camera or memory card is faulty and the
images cannot be recorded or downloaded to a computer, Canon
cannot be held liable for any loss or inconvenience caused.
Copyrights
Copyright laws in your country may prohibit the use of your recorded
images of people and certain subjects for anything but private
enjoyment. Also be aware that certain public performances, exhibitions,
etc., may prohibit photography even for private enjoyment.
2
Item Check List
Before starting, check that all the following items have been included
with your camera. If anything is missing, contact your dealer.
Wide Strap
EW-200D
PY Interface Cable
C O
Camera EOS DIGITAL Software Camera
Instruction Solution Disk Instruction Basic Instruction Manual
Manual (Software CD-ROM) Manual
(CD-ROM) (CD-ROM)
3
Conventions Used in this Manual
Icons in this Manual
<6> : Indicates the Main Dial.
<V> <U> : Indicates the <S> cross keys.
<0> : Indicates the setting button.
0, 9, 7, 8 : Indicates that the respective function remains
active for 4 sec., 6 sec., 10 sec., or 16 sec.
respectively after you let go of the button.
* In this manual, the icons and markings indicating the camera’s buttons, dials,
and settings correspond to the icons and markings on the camera and on the
LCD monitor.
Y
M : If shown on the upper right of the page, it indicates that the
P
function is available only in the Creative Zone modes (p.22).
O
(p.**) : Reference page numbers for more information.
C
: Tip or advice for better shooting.
: Problem-solving advice.
: Warning to prevent shooting problems.
: Supplemental information.
Basic Assumptions
All operations explained in this manual assume that the power switch
has already been set to <1> (p.31).
It is assumed that all the menu settings and Custom Functions are
set to the default.
For explanatory purposes, the instructions show the camera attached
with an EF-S18-55mm f/3.5-5.6 IS II lens.
4
Chapters
For first-time DSLR users, Chapters 1 and 2 explain the camera’s
basic operations and shooting procedures.
Introduction 2
1 Getting Started 25
3 Creative Shooting 71
4 Advanced Shooting 91
5
PY
Shooting with the LCD Monitor (Live View Shooting) 121
6
7
Shooting Movies
153
11 Reference 225
5
Contents at a Glance
Shooting
Shoot automatically Î p.49 - 62 (Basic Zone modes)
PY
Adjust the image brightness (exposure) Î p.101 (Exposure compensation)
O
Shoot in low light Î p.50, 88 (D Flash photography)
C
p.77 (ISO speed setting)
Shoot while viewing the LCD monitor Î p.121 (A Live View shooting)
Image Quality
Shoot with image effects matching the subject Î p.79 (Selecting a Picture Style)
6
Take many pictures Î p.74 (7a, 8a, b, c)
Focusing
Change the point of focus Î p.83 (S AF point selection)
Playback
View the images with the camera Î p.70 (x Playback)
Rate images
C
Prevent important images
from accidental deletion
O Î p.180 (Ratings)
Printing
Print pictures easily Î p.201 (Direct printing)
7
Index to Features
Power Image Quality
Battery Image-recording quality Î p.74
• Charging Î p.26 Picture Style Î p.79
• Installing/Removing Î p.28 White balance Î p.115
• Battery check Î p.32 Color space Î p.119
Power outlet Î p.228 Image enhancement features
Auto power off Î p.31 • Auto Lighting Optimizer Î p.107
• Lens peripheral
Card illumination correction Î p.108
Inserting/Removing Î p.28 • Noise reduction
Format Î p.44 for long exposures Î p.219
Release shutter without • Noise reduction
card Î p.154 for high ISO speeds Î p.219
Y
• Highlight tone priority Î p.220
P
Lens
AF
O
Attaching/Detaching Î p.35
Zoom Î p.36 AF mode Î p.81
Image Stabilizer
Basic Settings
Dioptric adjustment
C
Î p.37
Î p.38
AF point selection
Manual focusing
Drive
Î p.83
Î p.85
8
Index to Features
Y
first/last scene Î p.188
• Flash exposure
P
Slide show Î p.189
compensation Î p.102
O
Viewing images on TV Î p.191
• FE lock Î p.106
Protect Î p.194
C
External flash Î p.226
Erase Î p.196
Flash control Î p.167
Quick Control Î p.182
Live View Shooting
Printing
Live View shooting Î p.121
PictBridge Î p.201
Focusing Î p.128
Print Order (DPOF) Î p.211
Grid display Î p.127
Quick Control Î p.126 Customization
Custom Functions (C.Fn) Î p.216
Shooting Movies
My Menu Î p.224
Movie shooting Î p.139
Sound recording Î p.148 Software
Grid display Î p.148
Install Î p.271
Quick Control Î p.144
Software Instruction
Manual Î p.272
9
Contents
Introduction 2
Item Check List.................................................................................................. 3
Conventions Used in this Manual ...................................................................... 4
Chapters ............................................................................................................ 5
Contents at a Glance......................................................................................... 6
Index to Features .............................................................................................. 8
Handling Precautions ...................................................................................... 14
Quick Start Guide ............................................................................................ 16
Nomenclature .................................................................................................. 18
1 Getting Started 25
Charging the Battery ....................................................................................... 26
Installing and Removing the Battery and Card ................................................ 28
Turning on the Power ...................................................................................... 31
Y
Setting the Date and Time............................................................................... 33
Selecting the Interface Language.................................................................... 34
O P
Attaching and Detaching a Lens ..................................................................... 35
About the Lens Image Stabilizer...................................................................... 37
C
Basic Operation ............................................................................................... 38
Q Quick Control for Shooting Functions ........................................................ 40
3 Menu Operations................................................................................... 42
Formatting the Card......................................................................................... 44
Switching the LCD Monitor Display ................................................................. 46
Feature Guide ................................................................................................. 47
10
Contents
3 Creative Shooting 71
d: Program AE................................................................................................72
Setting the Image-recording Quality.................................................................74
Z: Changing the ISO Speed .........................................................................77
A Selecting the Subject’s Optimal Image Characteristics (Picture Style) ....79
E: Changing the Autofocus Mode (AF Mode) ................................................81
S Selecting the AF Point ..............................................................................83
Subjects Difficult to Focus................................................................................85
MF: Manual Focusing ...................................................................................85
i Continuous Shooting ..................................................................................86
j Using the Self-timer ....................................................................................87
Y
D Using the Built-in Flash ................................................................................88
4 Advanced Shooting
O P 91
s: Action Shots .............................................................................................92
C
f: Changing the Depth of Field ....................................................................94
Depth of Field Preview ..................................................................................96
a: Manual Exposure.......................................................................................97
8: Automatic Depth-of-Field AE................................................................99
q Changing the Metering Mode ..................................................................100
O y Setting Exposure Compensation .....................................................101
Auto Exposure Bracketing (AEB) ...................................................................103
A Locking the Exposure (AE Lock) ..............................................................105
A Locking the Flash Exposure (FE Lock).....................................................106
Correcting the Brightness and Contrast Automatically (Auto Lighting Optimizer).......107
Correcting the Image’s Dark Corners.............................................................108
A Customizing Image Characteristics (Picture Style) ................................110
A Registering Preferred Image Characteristics (Picture Style)..................113
B: Matching the Light Source (White Balance) ..........................................115
2 Adjusting the Color Tone for the Light Source..........................................117
Setting the Color Reproduction Range (Color Space) ...................................119
11
Contents
Y
Setting the Auto Power-off Time................................................................. 155
P
Adjusting the LCD Monitor Brightness ....................................................... 155
Creating and Selecting a Folder................................................................. 156
O
File Numbering Methods ............................................................................ 158
C
Setting Copyright Information..................................................................... 160
Auto Rotation of Vertical Images ................................................................ 162
B Checking Camera Settings................................................................ 163
Reverting the Camera to the Default Settings............................................ 164
Turning the LCD monitor Off/On................................................................. 166
Changing the Shooting Settings Screen Color........................................... 166
Setting the Flash ........................................................................................... 167
Appending Dust Delete Data ......................................................................... 171
Manual Sensor Cleaning ............................................................................... 173
12
Contents
Y
Custom Function Settings ..............................................................................218
P
Registering My Menu .....................................................................................224
O
11 Reference 225
C
External Speedlites ........................................................................................226
Using a Household Power Outlet ...................................................................228
F Using the Remote Switch...........................................................................229
Using Eye-Fi Cards ........................................................................................230
Function Availability Table According to Shooting Modes .............................232
Menu Settings ................................................................................................234
System Map ...................................................................................................240
Troubleshooting Guide...................................................................................242
Error Codes....................................................................................................250
Specifications .................................................................................................251
Safety Warnings.............................................................................................259
13
Handling Precautions
Camera Care
This camera is a precision instrument. Do not drop it or subject it to physical
shock.
The camera is not waterproof and cannot be used underwater. If you
accidentally drop the camera into water, promptly consult your nearest
Canon Service Center. Wipe off any water droplets with a dry cloth. If the
camera has been exposed to salty air, wipe it with a well-wrung wet cloth.
Never leave the camera near anything having a strong magnetic field such
as a magnet or electric motor. Also avoid using or leaving the camera near
anything emitting strong radio waves such as a large antenna. Strong
magnetic fields can cause camera misoperation or destroy image data.
Do not leave the camera in excessive heat such as in a car in direct sunlight.
High temperatures can cause the camera to malfunction.
The camera contains precision electronic circuitry. Never attempt to
disassemble the camera yourself.
Use a blower to blow away dust on the lens, viewfinder, reflex mirror, and
focusing screen. Do not use cleaners that contain organic solvents to clean
PY
the camera body or lens. For stubborn dirt, take the camera to the nearest
O
Do not touch the camera’s electrical contacts with your fingers. This is to
prevent the contacts from corroding. Corroded contacts can cause camera
C
misoperation.
If the camera is suddenly brought in from the cold into a warm room,
condensation may form on the camera and internal parts. To prevent
condensation, first put the camera in a sealed plastic bag and let it adjust to
the warmer temperature before taking it out of the bag.
If condensation forms on the camera, do not use the camera. This is to avoid
damaging the camera. If there is condensation, remove the lens, card and
battery from the camera, and wait until the condensation has evaporated
before using the camera.
If the camera will not be used for an extended period, remove the battery
and store the camera in a cool, dry, well-ventilated location. Even while the
camera is in storage, press the shutter button a few times once in a while to
check that the camera is still working.
Avoid storing the camera where there are corrosive chemicals such as a
darkroom or chemical lab.
If the camera has not been used for an extended period, test all its functions
before using it. If you have not used the camera for some time or if there is
an important shoot coming up, have the camera checked by your Canon
dealer or check the camera yourself and make sure it is working properly.
14
Handling Precautions
LCD Monitor
Although the LCD monitor is manufactured with very high precision
technology with over 99.99% effective pixels, there might be a few dead
pixels among the remaining 0.01% or less pixels. Dead pixels displaying
only black or red, etc., are not a malfunction. They do not affect the images
recorded.
If the LCD monitor is left on for a prolonged period, screen burn-in may occur
where you see remnants of what was displayed. However, this is only
temporary and will disappear when the camera is left unused for a few days.
In low or high temperatures, the LCD monitor display may seem slow or it
might look black. It will return to normal at room temperature.
Cards
To protect the card and its recorded data, note the following:
Do not drop, bend, or wet the card. Do not subject it to excessive force,
physical shock, or vibration.
Do not touch the card’s electronic contacts with your fingers or anything
Y
metallic.
P
Do not store or use the card near anything having a strong magnetic field
such as a TV set, speakers, or magnet. Also avoid places prone to having
O
static electricity.
C
Do not leave the card in direct sunlight or near a heat source.
Store the card in a case.
Do not store the card in hot, dusty, or humid locations.
Lens
After detaching the lens from the camera, attach the lens Contacts
caps or put down the lens with the rear end up to avoid
scratching the lens surface and electrical contacts.
Cautions During Prolonged Use
If you use continuous shooting, Live View shooting, or
movie shooting for a prolonged period, the camera may
become hot. Although this is not a malfunction, holding the
hot camera for a long period can cause slight skin burns.
About smudges adhering to the front of the sensor
Besides dust entering the camera from outside, in rare cases lubricant from the
camera’s internal parts may adhere to the front of the sensor. If visible spots
remain on the image, having the sensor cleaned by a Canon Service Center is
recommended.
15
Quick Start Guide
Insert the battery. (p.28)
1 To charge the battery, see page 26.
Y
Attach the lens. (p.35)
3 White index Red index
P
Align the lens’ white or red index
O
with the camera’s index in the
matching color.
16
Quick Start Guide
Y
If necessary, the built-in flash will
P
pop-up automatically.
8
C O Take the picture. (p.39)
Press the shutter button completely
to take the picture.
17
Nomenclature
The names in bold indicate the parts mentioned up until the “Basic
Shooting and Image Playback” section.
Mode Dial (p.22) Built-in flash/AF-assist beam
(p.88/84)
Power switch (p.31) EF Lens mount index (p.35)
Y
Microphone
Red-eye
P
reduction/ (p.140, 148)
Self-timer
O
lamp (p.89/87)
Grip
Mirror (p.173)
C
Contacts (p.15)
Terminal
cover
Remote control
terminal (p.229)
18
Nomenclature
Speaker
(p.186)
Y
LCD monitor
(p.42,155)
O P DC cord
hole
C
(p.228)
19
Nomenclature
Y
73 Large/Fine
Z
AI Servo AF 83 Large/Normal
P
74 Medium/Fine
g
84
O
Manual Focusing Medium/Normal
7a Small 1/Fine
Quick Control icon
C
(p.40,63) 8a Small 1/Normal
b Small 2 (Fine)
White balance (p.115) c Small 3 (Fine)
Q Auto 1 RAW
W Daylight 1+73 RAW+Large/Fine
E Shade
Number of possible shots
R Cloudy
Number of possible shots
Y Tungsten light
during WB bracketing
U White fluorescent light
Self-timer countdown
I Flash
O Custom 2 White balance correction (p.117)
Battery check (p.32) B White balance bracketing (p.118)
zxcn Metering mode (p.100)
Drive mode (p.86,87) q Evaluative metering
w Partial metering
u Single shooting
e Center-weighted average metering
i Continuous shooting
j Self-timer:10 sec Eye-Fi transmission status (p.230)
l Self-timer:2 sec (Displayed if an Eye-Fi card is used.)
q Self-timer:Continuous
Viewfinder Information
AF point activation indicator < >
<Z>
ISO speed
<2>
Y
White balance
correction
<A> AE lock/
AEB in-progress
O P <o> Focus
confirmation light
<D> Flash-ready
Improper FE lock
warning
C Max. burst
ISO speed
<e> High-speed sync
(FP flash) <A> Highlight tone priority
<d> FE lock/
FEB in-progress
Exposure level indicator
Exposure compensation amount
<y> Flash exposure AEB range
compensation Red-eye reduction lamp-on indicator
Aperture
21
Nomenclature
Mode Dial
The Mode Dial includes the Basic Zone modes, Creative Zone modes,
and the Movie shooting mode.
Creative Zone
These modes give you more control for
shooting various subjects.
d : Program AE (p.72)
s : Shutter-priority AE (p.92)
f : Aperture-priority AE (p.94)
a : Manual exposure (p.97)
8: Automatic depth-of-field AE
(p.99)
PY
Basic Zone
C O
All you do is press the shutter button.
The camera sets everything to suit the
subject.
1: Full Auto (p.50)
7: Flash Off (p.54)
C: Creative Auto (p.55) k: Movie shooting
(p.139)
Image Zone
2 : Portrait (p.58)
3: Landscape (p.59)
4 : Close-up (p.60)
5: Sports (p.61)
6 : Night Portrait (p.62)
22
Nomenclature
Lens
Lens without a distance scale
Filter thread
(front of lens) (p.257)
PY Contacts (p.15)
O
Lens mount index (p.35)
23
Nomenclature
Power plug
Charge lamp
Full-charge lamp
PY
O
Power cord
Full-charge lamp
C
Charge lamp Power cord socket
24
Getting Started
PY
This chapter explains preparatory steps before you start
shooting and basic camera operations.
C O
Attaching the Strap
Pass the end of the strap through
the camera’s strap mount eyelet
from the bottom. Then pass it
through the strap’s buckle as shown
in the illustration. Pull the strap to
take up any slack and make sure
the strap will not loosen from the
buckle.
The eyepiece cover is also
attached to the strap (p.229).
Eyepiece cover
25
Charging the Battery
Remove the protective cover.
1 Detach the protective cover provided
with the battery.
LC-E10
3 Recharge the battery.
For LC-E10
PY
As shown by the arrow, flip out the
battery charger’s prongs and insert
O
the prongs into a power outlet.
C
For LC-E10E
LC-E10E Connect the power cord to the
charger and insert the plug into the
power outlet.
X Recharging starts automatically and
the charge lamp turns orange.
X When the battery is fully recharged,
the full-charge lamp will turn green.
It takes approx. 2 hours to fully recharge a completely exhausted
battery at 23°C / 73°F. The time required to recharge the battery
depends on the ambient temperature and the battery’s charge
level.
For safety reasons, recharging in low temperatures (6°C - 10°C /
43°F - 50°F) will take a longer time (up to 4 hours).
26
Charging the Battery
PY
and shorter battery life. Store the battery with the protective cover
(provided) attached. Storing the battery after it is fully charged can
O
lower the battery’s performance.
C
The battery charger can also be used in foreign countries.
The battery charger is compatible with a 100 V AC to 240 V AC 50/
60 Hz power source. If necessary, attach a commercially-available
plug adapter for the respective country or region. Do not attach any
portable voltage transformer to the battery charger. Doing so can
damage the battery charger.
If the battery becomes exhausted quickly even after being fully
charged, the battery has reached the end of its service life.
Purchase a new battery.
After disconnecting the charger’s power plug, do not touch the prongs for
at least 3 sec.
Do not charge any battery other than a Battery Pack LP-E10.
The Battery Pack LP-E10 is dedicated to Canon products only. Using it
with an incompatible battery charger or product may result in malfunction
or accidents for which Canon cannot be held liable.
27
Installing and Removing the Battery and Card
Load a fully-charged Battery Pack LP-E10 into the camera. The card
(sold separately) can be an SD, SDHC, or SDXC memory card. The
captured images are recorded onto the card.
Make sure the card’s write-protect switch is set upward to
enable writing/erasing.
PY
Insert the end with the battery
contacts.
O
Insert the battery until it locks in
place.
Write-protect switch
C
3 Insert the card.
As shown in the illustration, face
the card’s label side toward the
camera back.
Insert the card straight in all the way.
28
Installing and Removing the Battery and Card
Y
Make sure the access lamp is off,
P
then open the cover.
O
If “Recording ...” is displayed, close
the cover.
When the access lamp is lit or blinking, it indicates that images are
being written to or read by the card, being erased, or data is being
transferred. When the access lamp is lit or blinking, do not open the
card/battery compartment cover and never do any of the following.
Otherwise, the image data may be destroyed or the card or camera
may be damaged.
• Removing the card.
• Removing the battery.
• Shaking or banging the camera around.
If the card already contains recorded images, the image number might
not start from 0001 (p.158).
Do not touch the card’s contacts with your fingers or metal objects.
If a card-related error message is displayed on the LCD monitor, remove
and reinsert the card. If the error persists, use a different card. If you can
transfer all the images on the card to a computer, transfer all the images
Y
and then format the card with the camera (p.44). The card may then
P
return to normal.
C O
30
Turning on the Power
If the date/time setting screen appears when you turn on the power
switch, see page 33 to set the date/time.
Y
You can change the auto power-off time with [5 Auto power off]
P
(p.155).
C O
If you set the power switch to <2> while an image is being recorded to
the card, [Recording ...] will be displayed and the power will turn off after
the card finishes recording the image.
31
Turning on the Power
Y
Battery Life
P
Temperature At 23°C / 73°F At 0°C / 32°F
O
No Flash Approx. 800 shots Approx. 750 shots
C
50% Flash Use Approx. 700 shots Approx. 650 shots
The figures above are based on a fully-charged Battery Pack LP-E10, no Live
View shooting, and CIPA (Camera & Imaging Products Association) testing
standards.
The number of possible shots will decrease with any of the following
operations:
• Pressing the shutter button halfway for a prolonged period.
• Often activating only the AF without taking a picture.
• Using the LCD monitor often.
• Using the lens Image Stabilizer.
The lens operation is powered by the camera’s battery. Depending on
the lens used, the number of possible shots may be lower.
For the number of possible shots with Live View shooting, see page 123.
32
3 Setting the Date and Time
When you turn on the power for the first time or if the date/time has
been reset, the Date/Time setting screen will appear. Follow steps 3
and 4 to set the date/time. Note that the date/time appended to
recorded images will be based on this date/time setting. Be sure to
set the correct date/time.
2 Under
Time].
the [6] tab, select [Date/
PY [6] tab.
Press the <V> key to select [Date/
3O
Time], then press <0>.
C
Set the date and time.
Press the <U> key to select the
date or time number.
Press <0> so <a> is displayed.
Press the <V> key to set the
number, then press <0>. (Returns
to b.)
4 ExitPress
the setting.
the <U> key to select [OK],
then press <0>.
X The date/time will be set.
If you store the camera without the battery or if the camera’s battery
becomes exhausted, the date/time might be reset. If this happens, set the
date/time again.
The date/time set will start from when you press <0> in step 4.
33
3 Selecting the Interface Language
Display the menu screen.
1 Press the <M> button to display
the menu screen.
PY
C O
3 SetPress
the desired language.
the <S> key to select the
language, then press <0>.
X The interface language will change.
34
Attaching and Detaching a Lens
Attaching a Lens
Remove the caps.
1 Remove the rear lens cap and the
body cap by turning them as shown
by the arrows.
White index
2 Attach the lens.
Align the lens’ red or white index with
the camera’s index matching the
same color. Turn the lens as shown
by the arrow until it snaps in place.
Red index
3 On PY
the lens, set the focus mode
C O
switch to <AF> (autofocus).
If it is set to <MF> (manual focus),
autofocus will not operate.
Minimizing Dust
When changing lenses, do it in a place with minimal dust.
When storing the camera without a lens attached, be sure to attach the
body cap to the camera.
Remove dust on the body cap before attaching it.
35
Attaching and Detaching a Lens
About Zooming
To zoom, turn the zoom ring on the lens
with your fingers.
If you want to zoom, do it before
focusing. Turning the zoom ring after
achieving focus may throw off the
focus slightly.
Y
Turn the lens until it stops, then
detach it.
O P
Attach the rear lens cap to the
detached lens.
C
Do not look at the sun directly through any lens. Doing so may cause
loss of vision.
If the front part (focusing ring) of the lens rotates during autofocusing, do
not touch the rotating part.
36
About the Lens Image Stabilizer
When you use the IS lens’ built-in Image Stabilizer, camera shake is
corrected to obtain a sharper shot. The procedure explained here is
based on the EF-S18-55mm f/3.5-5.6 IS II lens as an example.
* IS stands for Image Stabilizer.
3 TakeWhen
the picture.
Y
the picture looks steady in the
P
viewfinder, press the shutter button
completely to take the picture.
C O
The Image Stabilizer may not be effective if the subject moves at the time
of exposure.
The Image Stabilizer may not be effective for excessive shaking such as
on a rocking boat.
The Image Stabilizer can operate with the focus mode switch set to
either <f> or <g>.
If the camera is mounted on a tripod, you can save battery power by
switching the IS switch to <2>.
The Image Stabilizer is effective even when the camera is mounted on a
monopod.
Some IS lenses enable you to switch the IS mode manually to suit the
shooting conditions. However, the EF-S18-55mm f/3.5-5.6 IS II switches
the IS mode automatically.
37
Basic Operation
Adjusting the Viewfinder Clarity
Turn the dioptric adjustment
knob.
Turn the knob left or right until the
nine AF points in the viewfinder look
sharp.
Y
To obtain sharp images, hold the camera still to minimize camera
P
shake.
C O
38
Basic Operation
Shutter Button
The shutter button has two steps. You can press the shutter button
halfway. Then you can further press the shutter button completely.
Pressing halfway
This activates autofocusing and the
automatic exposure system that sets the
shutter speed and aperture.
The exposure setting (shutter speed and
aperture) is displayed in the viewfinder
(0).
While you press the shutter button
halfway, the LCD monitor will turn off
(p.166).
PY
Pressing completely
O
This releases the shutter and takes the
picture.
If you press the shutter button completely without pressing it halfway first
or if you press the shutter button halfway and then press it completely
immediately, the camera will take a moment before it takes the picture.
Even during the menu display, image playback, and image recording,
you can instantly go back to shooting-ready by pressing the shutter
button halfway.
39
Q Quick Control for Shooting Functions
You can directly select and set the shooting functions displayed on the
LCD monitor. This is called the Quick Control screen.
2 SetPress
the desired function.
the <S> key to select the
function to be set.
X The selected function and Feature
guide (p.47) will be displayed.
Y
Turn the <6> dial to change the
setting.
Basic Zone modes
C
3 TakePress
the picture.
the shutter button completely to
take the picture.
X The captured image will be displayed.
For the functions settable in Basic Zone modes and the setting procedure,
see page 63.
40
Q Quick Control for Shooting Functions
Y
Drive mode (p.86, 87) White balance bracketing*
(p.118)
P
Metering mode (p.100)
C O
Asterisked functions cannot be set with the Quick Control screen.
When you select <s> and press <0>, the built-in flash will pop-up.
41
3 Menu Operations
With menus, you can set various functions such as the image-recording
quality, date/time, etc. While looking at the LCD monitor, use the
<M> button, <S> cross keys, and <0> button on the camera
back to operate the menus.
<0> button
<M> button
Menu Screen
PY
In the Basic Zone, Movie shooting mode, and Creative Zone, the tabs
and menu options displayed will be different.
Basic Zone modes
C O
Movie shooting mode
Menu settings
Menu items
42
3 Menu Operations
2 Select a tab.
Press the <U> key to select a
menu tab.
PY
O
4 Select the setting.
Press the <V> or <U> key to
5 SetPress
the desired setting.
<0> to set it.
6 ExitPress
the setting.
the <M> button to return
to the shooting settings display.
In Step 2, you can also turn the <6> dial to select a menu tab.
The explanation of menu functions hereinafter assumes that you have
pressed the <M> button to display the menu screen.
For details about each menu item, see page 234.
43
3 Formatting the Card
If the card is new or was previously formatted by another camera or
computer, format the card with the camera.
When the card is formatted, all images and data in the card will
be erased. Even protected images will be erased, so make
sure there is nothing you need to keep. If necessary, transfer
the images to a computer, etc., before formatting the card.
Select [Format].
1 Under the [5] tab, select [Format],
then press <0>.
2 Format
Y
the card.
P
Select [OK], then press <0>.
X The card will be formatted.
C O
X When the formatting is completed,
the menu will reappear.
44
3 Formatting the Card
Y
card as usual.
O P
C
When the card is formatted or data is erased, only the file management
information is changed. The actual data is not completely erased. Be
aware of this when selling or discarding the card. When discarding the
card, execute low-level formatting or destroy the card physically to
prevent the data from being leaked.
Before using a new Eye-Fi card, the software in the card must be
installed in your computer. Then format the card with the camera.
The card capacity displayed on the card format screen might be smaller
than the capacity indicated on the card.
This device incorporates exFAT technology licensed from Microsoft.
45
Switching the LCD Monitor Display
The LCD monitor can display the shooting settings screen, menu
screen, captured images, etc.
Shooting Settings
When you turn on the power switch,
the shooting settings will be
displayed.
When you press the shutter button
halfway, the display will turn off.
And when you let go of the shutter
button, the display will turn on.
You can also turn off the display by
pressing the <B> button. Press
the button again to turn on the
Y
display.
P
Menu Functions
C O Captured Image
Appears when you press the Appears when you press the
<M> button. Press the <x> button. Press the button
button again to return to the again to return to the shooting
shooting settings screen. settings screen.
You can set [6 LCD off/on btn] so that the shooting settings display
does not keep turning off and on (p.166).
Even when the menu screen or captured image is displayed, pressing
the shutter button will enable you to shoot immediately.
46
Feature Guide
The Feature guide is a simple description of the respective function or
option. It is displayed when you change the shooting mode or use the
Quick Control screen to set a shooting function, Live View shooting,
movie shooting, or playback. When you select a function or option on
the Quick Control screen, the Feature guide description is displayed.
The Feature guide turns off when you further proceed with any
operation.
Shooting mode (Sample)
PY
C O
Shooting function Live View shooting Playback
47
PY
C O
48
Basic Shooting and
Image Playback
PY
This chapter explains how to use the Basic Zone modes
on the Mode Dial for best results and how to playback
images.
C O
With Basic Zone modes, all you do is point and shoot and the
camera sets everything automatically (p.63, 232). Also, to
prevent botched pictures due to mistaken operations, major
shooting settings cannot be changed in fully-automatic modes.
Ba
sic
Zone
PY
the lens focusing ring will rotate to
focus.
O
X The dot inside the AF point achieving
focus flashes briefly in red. At the
4 TakePress
the picture.
the shutter button completely to
take the picture.
X The captured image will be displayed
for approx. 2 sec. on the LCD monitor.
If the built-in flash has popped up,
you can push it back down with your
fingers.
50
1 Fully Automatic Shooting
FAQ
The focus confirmation light <o> blinks and focus is not achieved.
Aim the AF point over an area having good contrast, then press the
shutter button halfway (p.39). If you are too close to the subject,
move away and try again.
Sometimes multiple AF points flash simultaneously.
This indicates that focus has been achieved at all those AF points. When
the AF point covering the desired subject flashes, take the picture.
The beeper continues to beep softly. (The focus confirmation
light <o> does not light.)
It indicates that the camera is focusing continuously on a moving
subject. (The focus confirmation light <o> does not light.) You can
take sharp pictures of a moving subject.
PY
Pressing the shutter button halfway does not focus the subject.
If the focus mode switch on the lens is set to <MF> (Manual Focus),
O
set it to <AF> (Auto Focus).
C
Although it is daylight, the flash popped up.
For a backlit subject, the flash may pop up to help lighten the
subject’s dark areas.
In low light, the built-in flash fired a series of flashes.
Pressing the shutter button halfway may trigger the built-in flash to
fire a series of flashes to assist autofocusing. This is called AF-assist
beam. Its effective range is about 4 meters/13.1 feet.
Although flash was used, the picture came out dark.
The subject was too far away. The subject should be within 5
meters/16.4 feet from the camera.
When flash was used, the bottom part of the picture came out
unnaturally dark.
The subject was too close to the camera, and a shadow was created
by the lens barrel. The subject should be at least 1 meter/3.3 feet
away from the camera. If a hood has been attached to the lens,
remove it before taking the flash picture.
51
1 Full Auto Techniques
Recomposing the Shot
Depending on the scene, position the subject toward the left or right to
create a balanced background and good perspective.
In the <1> (Full Auto) mode, while you press the shutter button
halfway to focus a still subject, the focus will be locked. You can then
PY
recompose the shot and press the shutter button completely to take the
picture. This is called “focus lock”. Focus lock is also possible in other
O
Basic Zone modes (except <5> Sports).
In the <1> (Full Auto) mode, if the subject moves (distance to camera
changes) during or after you focus, AI Servo AF will take effect to focus
the subject continuously. As long as you keep aiming the AF point on
the subject while pressing the shutter button halfway, the focusing will
be continuous. When you want to take the picture, press the shutter
button completely.
52
1 Full Auto Techniques
Y
Press the shutter button halfway to
P
focus.
X When focus is achieved, the AF point
3 TakePress
the picture.
the shutter button completely.
X The picture will be taken and the
captured image is displayed on the
LCD monitor.
X After the image review ends, the
camera will return to Live View
shooting automatically.
Press the <A> button to exit Live
View shooting.
53
7 Disabling Flash
In places where flash photography is prohibited, use the <7> (Flash
Off) mode. This mode is also effective for capturing the particular
ambience of a scene, such as candlelight scenes.
PY
Shooting Tips
C O
Prevent camera shake if the numeric display in the viewfinder
blinks.
Under low light when camera shake is prone to occur, the
viewfinder’s shutter speed display will blink. Hold the camera steady
or use a tripod. When using a zoom lens, use the wide-angle end to
reduce blur caused by camera shake.
Taking portraits without flash.
In low-light conditions, tell the subject to keep still until the picture is
taken. If the person moves during the exposure, he or she might look
blurred in the picture.
54
C Creative Auto Shooting
Unlike the <1> Full Auto mode where the camera sets everything, the
<C> Creative Auto mode enables you to easily change the depth of
field, drive mode, and flash firing.
You can also choose the ambience you want to convey in your images.
The default setting is the same as the <1> (Full Auto) mode.
* CA stands for Creative Auto.
4 TakePress
the picture.
the shutter button completely to
take the picture.
If you change the shooting mode or turn the power switch to <2>, the
function you have set on this screen will revert to the default setting.
However, the self-timer setting will be retained.
55
C Creative Auto Shooting
Y
(1) Shoot by ambience selection
You can set the ambience you want to convey in your images. Press
O P
the <U> key or turn the <6> dial to select the desired
ambience. You can also select it from a list by pressing <0>. For
C
details, see page 64.
(2) Blurring/sharpening the background
If you move the index mark toward the left, the background will look
more blurred. If you move it toward the right, the background will
look more in focus. If you want to blur the background, see “Shooting
Portraits” on page 58. Press the <U> key or turn the <6> dial to
adjust it as desired.
Depending on the lens and shooting conditions, the background
might not look so blurred. This function cannot be set (grayed out) if
<r> has been set or if the built-in flash is raised with <a> set. If
flash is used, this setting will not be applied.
56
C Creative Auto Shooting
Drive mode: Press the <U> key or turn the <6> dial to set it as desired.
<u> Single shooting : Shoot one image at a time.
<i> Continuous shooting:
While you hold down the shutter button
PY
completely, shots will be taken continuously.
You can shoot up to about 3 shots per sec.
O
<j> Self-timer:10 sec : The picture is taken 10 seconds after you
C
press the shutter button.
<q> Self-timer:Continuous:
Press the <V> key to set the number of
multiple shots (2 to 10) to be taken with the
self-timer. 10 seconds after you press the
shutter button, the set number of multiple
shots will be taken.
Flash firing: Press the <U> key or turn the <6> dial to set it as
desired.
<a> Auto flash: The flash fires automatically when necessary.
<I> Flash on : The flash fires at all times.
<b> Flash off : The flash is disabled.
57
2 Shooting Portraits
The <2> (Portrait) mode blurs the background to make the human
subject stand out. It also makes skin tones and the hair look softer than
with the <1> (Full Auto) mode.
PY
Shooting Tips
C O
The further the distance between the subject and background,
the better.
The further the distance between the subject and background, the
more blurred the background will look. The subject will also stand
out better in front of a plain, dark background.
Use a telephoto lens.
If you have a zoom lens, use the telephoto end to fill the frame with
the subject from the waist up. Move in closer if necessary.
Focus the face.
Check that the AF point covering the face flashes in red.
If you hold down the shutter button, you can shoot continuously to obtain
different poses and facial expressions. (Up to approx. 3 shots per sec. in
JPEG quality.)
If necessary, the built-in flash will pop up automatically.
58
3 Shooting Landscapes
Use the <3> (Landscape) mode for wide scenery, night scenes, or to
have everything in focus from near to far. The greens and blues also
become more vivid and the image sharper than with <1> (Full Auto).
PY
Shooting Tips
C O
With a zoom lens, use the wide-angle end.
When using the wide-angle end of a zoom lens, objects near and far
will be in focus better than at the telephoto end. It also adds breadth
to landscapes.
Shooting night scenes.
Since the built-in flash will be disabled, this
mode <3> is also good for night scenes.
Use a tripod to prevent camera shake.
If you want to photograph a person against
a night scene, set the Mode Dial to <6>
(Night Portrait) and use a tripod (p.62).
59
4 Shooting Close-ups
When you want to photograph flowers or small things up close, use the
<4> (Close-up) mode. To make small things appear much larger, use a
macro lens (sold separately).
PY
Shooting Tips
60
5 Shooting Moving Subjects
To photograph a moving subject, whether it is a child running or a
moving vehicle, use the <5> (Sports) mode.
PY
O
Shooting Tips
C
Using a telephoto lens is recommended so you can shoot from afar.
Use the center AF point to focus.
Aim the center AF point over the subject, then press the shutter
button halfway to autofocus. During autofocusing, the beeper will
continue beeping softly. If focus cannot be achieved, the focus
confirmation light <o> will blink.
When you want to take the picture, press the shutter button
completely. If you hold down the shutter button, continuous shooting
(max. approx. 3 shots per sec. in JPEG quality) and autofocusing
will take effect.
Under low light when camera shake is prone to occur, the viewfinder’s
shutter speed display on the bottom left will blink. Hold the camera steady
and shoot.
61
6 Shooting Portraits at Night
To shoot someone at night and obtain a natural-looking exposure in the
background, use the <6> (Night Portrait) mode.
PY
O
Shooting Tips
C
Use a wide-angle lens and a tripod.
When using a zoom lens, use the wide-angle end to obtain a wide
night view. Also, use a tripod to prevent camera shake.
Keep the person within 5 meters/16.4 feet from the camera.
Under low light, the built-in flash will fire automatically to obtain a
good exposure of the person. The maximum effective distance of the
built-in flash is 5 meters/16.4 feet from the camera.
Shoot also with <1> (Full Auto).
Since camera shake is prone to occur with night shots, shooting also
with <1> (Full Auto) is recommended.
Tell the subject to keep still even after the flash fires.
If you use the self-timer together with flash, the self-timer lamp will light
briefly after the picture is taken.
62
Q Quick Control
Example: Portrait mode In Basic Zone modes when the shooting
settings screen is displayed, you can
press the <Q> button to display the
Quick Control screen. The table below
indicates the functions that can be set
with the Quick Control screen in each
Basic Zone mode.
PY
Press the <V> key to select a function. (Step not necessary in
the 1/7 mode.)
C
Settable Functions in Basic Zone Modes
o:
O
X The selected function and Feature guide (p.47) will be displayed.
Press the <U> key or turn the <6> dial to change the setting.
63
Shoot by Ambience Selection
Except in the <1> (Full Auto) and <7> (Flash Off) Basic Zone
modes, you can select the ambience for shooting.
Y
Set the Mode Dial to any of the
1 following modes: <C>, <2>,
2 O P
<3>, <4>, <5> or <6>.
Display the Live View image.
4 SetPress
the ambience effect.
the <V> key to select the
effect bar so that [Effect] appears at
the bottom.
Press the <U> key or turn the
<6> dial to select the desired
effect.
5 TakeTo shoot
the picture.
while the Live View image is
displayed, press the shutter button.
To return to viewfinder shooting,
press the <A> button to exit Live
View shooting. Then press the shutter
button completely to take the picture.
PY
If you change the shooting mode or
set the power switch to <2>, the
O
setting will revert back to [Standard
setting].
C
The Live View image shown with the ambience setting applied will not
look exactly the same as the actual photo.
Using flash may minimize the ambience effect.
In bright outdoors, the Live View image you see on the screen might not
have exactly the same brightness or ambience as the actual photo. Set
[6 LCD brightness] to 4 and look at the Live View image while the
screen is unaffected by stray light.
If you don’t want the Live View image to be displayed when setting
functions, press the <Q> button after step 1. When you press the <Q>
button, the Quick Control screen is displayed and you can set [Shoot by
ambience selection] and [Shoot by lighting or scene], then shoot with
the viewfinder.
65
Shoot by Ambience Selection
Ambience Settings
(1) Standard setting
Standard image characteristics for the respective shooting mode.
Note that <2> has image characteristics geared for portraits and
<3> is geared for landscapes. Each ambience is a modification of
the respective shooting mode’s image characteristics.
(2) Vivid
The subject will look sharp and vivid. It makes the photo look more
impressive than with [Standard setting].
(3) Soft
The subject will look softer and more dainty. Good for portraits, pets,
flowers, etc.
(4) Warm
The subject will look softer with warmer colors. Good for portraits,
(5) Intense
PY
pets, and other subjects to which you want to give a warm look.
O
While the overall brightness is slightly lowered, the subject is
C
emphasized for a more intense feeling. Makes the human or living
subject stand out more.
(6) Cool
The overall brightness is slightly lowered with a cooler color cast. A
subject in the shade will look more calm and impressive.
(7) Brighter
The picture will look brighter.
(8) Darker
The picture will look darker.
(9) Monochrome
The picture will be monochrome. You can select the monochrome
color to be black and white, sepia, or blue. When [Monochrome] is
selected, <0> will appear in the viewfinder.
66
Shoot by Lighting or Scene Type
In the <2> (Portrait), <3> (Landscape), <4> (Close-up), and <5>
(Sports) Basic Zone modes, you can shoot while the settings match the
lighting or scene type. Normally, [Default setting] is adequate, but if the
settings match the lighting condition or scene, the picture will look more
accurate to your eye.
For Live View shooting, if you set both [Shoot by lighting or scene
type] and [Shoot by ambience selection] (p.64), you should first set
[Shoot by lighting or scene type]. This will make it easier to see the
resulting effect on the LCD monitor.
Lighting or Scene 1 7 C 2 3 4 5 6
(1) Default setting k k k k
(2) Daylight k k k k
(3) Shade k k k k
Y
(4) Cloudy k k k k
P
(5) Tungsten light k k k
O
(6) Fluorescent light k k k
(7) Sunset k k k k
67
Shoot by Lighting or Scene Type
4 TakeTo shoot
the picture.
O
To return to the viewfinder image,
C
press the <A> button to exit Live
View shooting. Then press the shutter
button completely to take the picture.
If you change the shooting mode or
set the power switch to <2>, the
setting will revert back to [Default
setting].
If you use flash, the setting will switch to [Default setting]. (However, the
shooting information will display the lighting or scene type that was set.)
If you want to set this together with [Shoot by ambience selection], set
the [Shoot by lighting or scene type] which best matches the ambience
you have set. In the case of [Sunset] for example, warm colors will
become prominent so the ambience you set might not work well.
If you don’t want the Live View image to be displayed when setting
functions, press the <Q> button after step 1. Pressing the <Q> button will
display the Quick Control screen. You can then set [Shoot by lighting or
scene type] and shoot through the viewfinder.
68
Shoot by Lighting or Scene Type
Y
(5) Tungsten light
For subjects lit under tungsten lighting. Reduces the reddish-orange
C
For subjects under fluorescent lighting. Suited for all types of
fluorescent lighting.
(7) Sunset
Suitable when you want to capture the sunset’s impressive colors.
69
x Image Playback
The easiest way to playback images is explained below. For more
details on the playback procedure, see page 175.
2 Select an image.
To view images starting with the last
image, press the <Y> key. To view
images starting with the first (oldest)
image, press the <Z> key.
Each time you press the <B>
Y
button, the display format will change.
P
C O
With basic information Basic information +
Image quality/Playback number
3 ExitPress
the image playback.
the <x> button to exit the
image playback and return to the
shooting settings display.
70
Creative Shooting
PY
In the Basic Zone modes, to prevent spoiled shots,
most functions are set automatically and cannot be
O
changed. In the <d> (Program AE) mode, you can set
C
various functions and be more creative.
In the <d> mode, the camera sets the shutter speed and
aperture automatically to obtain a standard exposure.
The difference between the Basic Zone modes and <d> is
explained on page 232.
The functions explained in this chapter can also be used in
the <s>, <f>, and <a> modes explained in Chapter
4.
The M mark shown on the right of the page title indicates
that the function is available only in Creative Zone modes
(p.22).
* <d> stands for Program.
* AE stands for Auto Exposure.
71
d: Program AE
The camera automatically sets the shutter speed and aperture to suit
the subject’s brightness. This is called Program AE.
Y
viewfinder’s bottom right lights (with
P
One Shot AF).
O
X The shutter speed and aperture will
be set automatically and displayed in
C
3 Check
the viewfinder.
the display.
A standard exposure will be obtained
as long as the shutter speed and
aperture display do not blink.
4 TakeCompose
the picture.
the shot and press the
shutter button completely.
If you use a TS-E lens to shift the lens vertically or use an Extension Tube,
the standard exposure might not be obtained or an irregular exposure may
result.
72
d: Program AE
Shooting Tips
Change the ISO speed or use the built-in flash.
To match the subject and ambient lighting level, you can change the
ISO speed (p.77) or use the built-in flash (p.88). In the <d> mode,
the built-in flash will not fire automatically. So under low light, press
the <I> (Flash) button to pop up the built-in flash. (You can also pop
up the built-in flash by selecting the <s> icon on the Quick Control
screen.)
The program can be shifted. (Program shift)
After pressing the shutter button halfway, turn the <6> dial to
change the shutter speed and aperture setting combination
(program). Program shift is canceled automatically after the picture
is taken. Program shift is not possible with flash.
PY
C O
If the “30"” shutter speed and the maximum aperture
blink, it indicates underexposure. Increase the ISO
speed or use flash.
If the “4000” shutter speed and the minimum aperture
blink, it indicates overexposure. Decrease the ISO
speed.
73
3 Setting the Image-recording Quality
You can select the pixel count and the image quality. Ten image-
recording quality settings are provided: 73, 83, 74, 84, 7a,
8a, b, c, 1, 1+73.
Select [Quality].
1 Under the [1] tab, select [Quality],
then press <0>.
X [Quality] will appear.
Pixel count
Possible shots
2 Select the image-recording
quality.
The respective quality’s pixel count
and number of possible shots will be
displayed to help you select the
desired quality. Then press <0>.
PY
O
Guide to Image-recording Quality Settings (Approx.)
C
Pixels Recorded File Size Possible Maximum
Quality
(megapixels) (MB) Shots Burst
73 High Approx. 12.2 4.4 830 830
83 quality (12.2M) 2.2 1600 1600
74 Medium Approx. 6.3 2.6 1400 1400
84 quality (6.3M) 1.4 2630 2630
7a JPEG Approx. 3.4 1.7 2130 2130
8a (3.4M) 0.9 4060 4060
Low Approx. 2.5
b quality 1.2 2880 2880
(2.5M)
Approx. 0.35
c 0.3 11280 11280
(0.35M)
1 High Approx. 12.2 16.7 210 5
1+73 quality (12.2M) 16.7+4.4 170 1
* Figures for the file size, number of possible shots, and maximum burst are based on
Canon’s 4GB test card and testing standards (ISO 100 and Standard Picture Style).
These figures will vary depending on the subject, card brand, ISO speed, Picture
Style, Custom Functions, and other settings.
74
3 Setting the Image-recording Quality
FAQ
I want to select the image-recording quality matching the paper
size for printing.
Paper size
Refer to the diagram on the left when
choosing the image-recording quality. If
A3 (42x29.7cm/16.5x11.7in.)
you want to crop the image, selecting a
73
A4 (29.7x21cm/ 83 higher quality (more pixels) such as 73,
11.7x8.3in.) 1 83, 1, or 1+73 is recommended.
1+73
74 b is suitable for playing the images on a
84
b
7a
8a
digital photo frame. c is suitable for
emailing the image or using it on a Web
17.8x12.7cm/7.0x5.0in. site.
14.8x10cm/5.8x3.9in.
Y
12.7x8.9cm/5.0x3.5in.
P
What’s the difference between 7 and 8?
It indicates a different image quality due to a different compression
O
rate. Even with the same number of pixels, the 7 image has higher
C
image quality. If 8 is selected, the image quality will be slightly lower,
but more images can be saved to the card. Both b and c have 7
(Fine) quality.
I could take more shots than the number of possible shots
indicated.
Depending on the shooting conditions, you may be able to take
more shots than was indicated. It might also be fewer than indicated.
The number of possible shots displayed is only approximate.
Does the camera display the maximum burst?
The maximum burst is displayed in the viewfinder’s right side. Since
it is only a single-digit indicator 0 - 9, any number higher than 9 will
be displayed only as “9.” Note that this number will also be displayed
even when no card is installed in the camera. Be careful not to shoot
without a card in the camera.
When should I use 1?
1 images require processing with your computer. For details, see
“About 1” and “About 1+73” on the next page.
75
3 Setting the Image-recording Quality
About 1
1 is the raw image data before it is made into 73 or other images.
Although 1 images require software like Digital Photo Professional
(provided, p.270) so they can be displayed on the computer, they also
offer flexibility for image adjustments possible only with 1. 1 is
effective when you want to precisely adjust the image yourself or shoot
an important subject.
About 1+73
1+73 records both a 1 and 73 image with a single shot. The
two images are saved to the card simultaneously. The two images will
be saved in the same folder with the same file numbers (file extension
Y
.JPG for JPEG and .CR2 for RAW). 73 images can be viewed or
printed even with a computer which does not have the software
provided with the camera installed.
O P
C 1 image
73 image
0001 . CR2
0001 . JPG
76
Z: Changing the ISO SpeedN
Set the ISO speed (image sensor’s sensitivity to light) to suit the
ambient light level. In Basic Zone modes, the ISO speed is set
automatically (p.78).
2 SetPress
the ISO speed.
the <U> key or turn the
<6> dial to select the desired ISO
speed, then press <0>.
With [AUTO] selected, the ISO speed
PY
will be set automatically (p.78).
77
Z: Changing the ISO SpeedN
ISO [AUTO]
If the ISO speed is set to [AUTO], the
actual ISO speed to be set will be
displayed when you press the shutter
button halfway. As indicated below, the
ISO speed will be set automatically to
suit the shooting mode.
Shooting Mode ISO Speed Setting
1/7/C/3/4/5/6 Automatically set within ISO 100 - 3200
d/s/f/a*1/8 Automatically set within ISO 100 - 6400*2
2 Fixed at ISO 100
With flash Fixed at ISO 800*3*4*5
Y
*1: Fixed at ISO 800 for bulb exposures.
*2: Depends on the maximum ISO speed limit set.
P
*3: If fill flash results in overexposure, ISO 100 or a higher ISO speed will be set.
*4: If bounce flash is used with an external Speedlite in a Basic Zone (except
C
*5: Fixed at ISO 400 if the maximum limit is ISO 400.
78
A Selecting the Subject’s Optimal Image CharacteristicsN
By selecting a Picture Style, you can obtain image characteristics
matching your photographic expression or the subject.
In Basic Zone modes, you cannot select the Picture Style.
Y
X The Picture Style will be set and the
P
menu reappears.
C
Picture Style Characteristics
O
P Standard
The image looks vivid, sharp, and crisp. This is a general-purpose
Picture Style suitable for most scenes.
Q Portrait
For nice skin tones. The image looks softer. Good for close-up
portraits. This Picture Style is also selected automatically when the
Mode Dial is set to <2>.
By changing the [Color tone] (p.111), you can adjust the skin tone.
R Landscape
For vivid blues and greens, and very sharp and crisp images.
Effective for impressive landscapes. This Picture Style is also
selected automatically when the Mode Dial is set to <3>.
79
A Selecting the Subject’s Optimal Image CharacteristicsN
S Neutral
This Picture Style is for users who prefer to process images with
their computer. For natural colors and subdued images.
U Faithful
This Picture Style is for users who prefer to process images with
their computer. When the subject is captured under a color
temperature of 5200K, the color is adjusted colorimetrically to match
the subject’s color. The image looks dull and subdued.
V Monochrome
Creates black-and-white images.
Y
When [Monochrome] is set, <0> will appear in the viewfinder.
P
W User Def. 1-3
O
You can register a basic style such as [Portrait], [Landscape], a
Picture Style file, etc., and adjust it as desired (p.113). Any User
C
Defined Picture Style which has not been set will have the same
default settings as the [Standard] Picture Style.
80
E: Changing the Autofocus ModeN
You can select the AF (autofocus) mode to suit the shooting conditions
or subject. In Basic Zone modes, the most suitable AF mode is set
automatically.
P
3 SelectYthe AF mode.
O
Press the <U> key or turn the
<6> dial to select the desired AF
Y
uses the center AF point to focus. During autofocusing, if the subject
P
moves away from the center AF point, focus tracking continues as
O
long as the subject is covered by another AF point.
C
With AI Servo AF, the beeper will not sound even when focus is achieved.
Also, the focus confirmation light <o> in the viewfinder will not light.
When focus is achieved in the AI Focus AF mode with the Servo mode
active, the beeper will sound continuously sofltly. However, the focus
confirmation light <o> in the viewfinder will not light.
82
S Selecting the AF Point N
In Basic Zone modes, the camera will normally focus the closest subject
automatically. Therefore, it might not always focus your target subject.
In the <d>, <s>, <f>, and <a> modes, you can select the AF
point and use it to focus the target subject.
PY
can select the AF point by turning the
<6> dial until the desired AF point
O
lights in red.
C
When all the AF points light up,
automatic AF point selection will be
set. The AF point will be selected
automatically to focus the subject.
Pressing <0> toggles the AF point
selection between the center AF point
and automatic AF point selection.
83
S Selecting the AF Point N
Shooting Tips
When shooting a portrait up close, use One-Shot AF and focus
the eyes.
If you focus the eyes first, you can then recompose and the face will
remain sharp.
If it is difficult to focus, select and use the center AF point.
The center AF point is the most sensitive among the nine AF points.
To make it easier to focus a moving subject, set the camera to
automatic AF point selection and AI Servo AF (p.82).
The center AF point will first be used to focus the subject. During
autofocusing, if the subject moves away from the center AF point,
focus tracking continues as long as the subject is covered by
another AF point.
The AF-assist beam will not be fired in the following shooting modes:
<7>, <3> and <5>.
The AF-assist beam cannot be emitted in the AI Servo AF mode.
The effective range of the AF-assist beam emitted by the built-in flash is
about 4 meters/13.1 feet.
In Creative Zone modes when you raise the built-in flash with the <I>
button (p.88), the AF-assist beam will be fired when necessary.
84
Subjects Difficult to Focus
Autofocus can fail to achieve focus (viewfinder’s focus confirmation light
<o> blinks) with certain subjects such as the following:
Very low-contrast subjects.
(Example: Blue sky, solid-color walls, etc.)
Subjects in very low light
Extremely backlit or reflective subjects
(Example: Car with a highly reflective body, etc.)
Near and far subjects covered by an AF point
(Example: Animal in a cage, etc.)
Repetitive patterns
(Example: Skyscraper windows, computer keyboards, etc.)
In such cases, do one of the following:
(1) With One-Shot AF, focus an object at the same distance as the
subject and lock the focus before recomposing (p.52).
PY
(2) Set the lens focus mode switch to <MF> and focus manually.
If you hold down the shutter button halfway during manual focusing, the AF
point achieving focus will light in red briefly, the beeper will sound, and the
focus confirmation light <o> in the viewfinder will light.
85
i Continuous ShootingN
You can shoot up to about 3 shots per sec. This is effective for shooting
a child running toward you or capturing different facial expressions.
Y
1+73 : Approx. 0.8 fps
(averaged value)
3 TakeThethe
O Ppicture.
camera shoots continuously while you
86
j Using the Self-timer
1 Press the <Yij> button.
2 Select the self-timer.
Press the <U> key or turn the
<6> dial to select the desired self-
timer, then press <0>.
j : 10-sec. self-timer
l : 2-sec. self-timerN
q : 10-sec. self-timer plus
continuous shots
Press the <V> key to set
the number of continuous
shots (2 to 10) to be taken
with the self-timer.
PY
3 TakeLookthethrough
picture.
the viewfinder, focus
O
the subject, then press the shutter
button completely.
With <q>, the interval between the multiple shots may be prolonged depending on
the shooting functions settings such as the image-recording quality or flash.
After taking self-timer shots, you should check the image for proper focus and exposure (p.70).
If you will not look through the viewfinder when you press the shutter
button, attach the eyepiece cover (p.229). If stray light enters the
viewfinder when the picture is taken, it may throw off the exposure.
When using the self-timer to shoot only yourself, use focus lock (p.52) on
an object at about the same distance as where you will stand.
To cancel the self-timer after it starts, press the <Yij> button. To cancel the
self-timer during Live View shooting, set the power switch to <2>.
87
D Using the Built-in Flash
In indoors, low light, or backlit conditions in daylight, just raise the built-
in flash and press the shutter button to take flash pictures. In the <d>
mode, the shutter speed (1/60 sec. - 1/200 sec.) will be set
automatically to prevent camera shake.
Y
In the bottom left of the viewfinder,
P
check that the <D> icon is lit.
O
Take the picture.
3 When focus is achieved and you
88
D Using the Built-in Flash
Shooting Tips
If the subject is far away, increase the ISO speed (p.77).
By increasing the ISO speed, you can extend the flash range.
In bright light, decrease the ISO speed.
If the exposure setting in the viewfinder blinks, decrease the ISO
speed.
Detach the lens hood and keep at least 1 meter/3.3 feet away
from the subject.
If the lens has a hood attached or you are too close to the subject,
the bottom of the picture might look dark due to the obstructed flash.
For important shots, check the image on the LCD monitor to make
sure the flash exposure looks natural (not dark at the bottom).
3 Red-eye Reduction
PY
Using the red-eye reduction lamp before taking a flash picture can
C O
reduce red eye. Red-eye reduction will work in any shooting mode
The red-eye reduction feature is most effective when the subject looks at
the red-eye reduction lamp, when the room is well lit, or when you are
close to the subject.
When you press the shutter button halfway, the
scale display on the bottom of the viewfinder will
shrink and turn off. For best results, take the picture
after this scale display turns off.
The effectiveness of red-eye reduction varies depending on the subject.
89
PY
C O
90
Advanced Shooting
O
The first half of this chapter explains how to use the <s>
C
<f> <a> <8> modes on the Mode Dial.
All the functions explained in Chapter 3 can also be used in
the <s>, <f>, and <a> modes.
To see which functions can be used in each shooting mode,
see page 232.
The M mark shown on the right of the page title indicates
that the function is available only in Creative Zone modes
(p.22).
c About the Main Dial Pointer
The pointer icon <c> displayed
together with the shutter speed, aperture
setting, or exposure compensation
amount indicates that you can turn the
<6> dial to adjust the respective
setting.
91
s: Action Shots
You can either freeze the action or create motion blur with the <s>
(Shutter-priority AE) mode on the Mode Dial.
* <s> stands for Time value.
PY
2 SetSee
O
the desired shutter speed.
C
“Shooting Tips” for advice on
setting the shutter speed.
Turning the <6> dial to the right
sets a faster shutter speed, and
turning it to the left sets a slower one.
3 TakeWhen
the picture.
you focus and press the
shutter button completely, the picture
will be taken at the selected shutter
speed.
92
s: Action Shots
Shooting Tips
To freeze the action or moving subject.
Use a fast shutter speed such as 1/4000 sec. to 1/500 sec.
To blur a running child or animal giving the impression of fast
movement.
Use a medium shutter speed such as 1/250 sec. to 1/30 sec. Follow
the moving subject through the viewfinder and press the shutter
button to take the picture. If you use a telephoto lens, hold it steady
to prevent camera shake.
How to blur a flowing river or water fountain.
Use a slow shutter speed of 1/30 sec. or slower. Use a tripod to
prevent hand-held camera shake.
PY
Set the shutter speed so that the aperture display does not
O
If you press the shutter button halfway and change
the shutter speed while the aperture is displayed,
C
the aperture display will also change to maintain the
same exposure (amount of light reaching the image
sensor). If you exceed the adjustable aperture
range, the aperture display will blink to indicate that
the standard exposure cannot be obtained.
If the exposure will be too dark, the maximum aperture (smallest
number) will blink. If this happens, turn the <6> dial to the left to
set a slower shutter speed or increase the ISO speed.
If the exposure will be too bright, the minimum aperture (highest
number) will blink. If this happens, turn the <6> dial to the right to
set a faster shutter speed or decrease the ISO speed.
93
f: Changing the Depth of Field
To blur the background or to make everything near and far look sharp,
set the Mode Dial to <f> (Aperture-priority AE) to adjust the depth of
field (range of acceptable focus).
* <f> stands for Aperture value which is the size of the diaphragm hole inside the lens.
3 TakeFocus
the picture.
and press the shutter button
completely. The picture will be taken
with the selected aperture.
Aperture Display
The higher the f/number, the smaller the aperture opening will be. The
apertures displayed will differ depending on the lens. If no lens is attached to
the camera, “00” will be displayed for the aperture.
94
f: Changing the Depth of Field
Shooting Tips
When using an aperture with a high f/number, note that camera
shake can occur in low light scenes.
A higher aperture f/number will make the shutter speed slower.
Under low light, the shutter speed can be as long as 30 sec. In such
cases, increase the ISO speed and hold the camera steady or use a
tripod.
The depth of field depends not only on the aperture, but also on
the lens and on the subject distance.
Since wide-angle lenses have a wide depth of field (range of
acceptable focus in front of and behind the point of focus), you need
not set a high aperture f/number to obtain a sharp picture from the
foreground to the background. On the other hand, a telephoto lens
has a narrow depth of field.
PY
And the closer the subject, the narrower the depth of field. A farther
O
subject will have a wider depth of field.
C
Set the aperture so that the shutter speed display does not
blink.
If you press the shutter button halfway and change
the aperture while the shutter speed is displayed,
the shutter speed display will also change to
maintain the same exposure (amount of light
reaching the image sensor). If you exceed the
adjustable shutter speed range, the shutter speed
display will blink to indicate that the standard
exposure cannot be obtained.
If the picture will be too dark, the “30"” (30 sec.) shutter speed
display will blink. If this happens, turn the <6> dial to the left to set
a lower aperture f/number or increase the ISO speed.
If the picture will be too bright, the “4000” (1/4000 sec.) shutter
speed display will blink. If this happens, turn the <6> dial to the
right to set a higher aperture f/number or decrease the ISO speed.
95
f: Changing the Depth of Field
PY
The aperture opening (diaphragm) changes only at the moment when
O
the picture is taken. Otherwise, the aperture remains fully open.
C
Therefore, when you look at the scene through the viewfinder or LCD
monitor, the depth of field will look narrow. With the procedure below,
you can check the depth of field before taking the picture.
While looking at the Live View image (p.122) and holding down the <0>
button, you can change the aperture and see how the depth of field
changes.
96
a: Manual Exposure
You can set both the shutter speed and aperture manually as desired.
While referring to the exposure level indicator in the viewfinder, you can
set the exposure as desired. This method is called manual exposure.
* <a> stands for Manual.
PY
Press the shutter button halfway.
X The exposure setting will be
O
Exposure level mark displayed in the viewfinder.
C4
The exposure level mark <h> indicates
how far the current exposure level is
from the standard exposure level.
Set the exposure and take the
picture.
Set the shutter speed and aperture as
desired.
If the exposure set exceeds ±2 stops from
the standard exposure, the end of the
exposure level indicator will display <I>
or <J> in the viewfinder. (On the LCD
monitor, if the exposure level is higher
than ±3 stops, the <N> icon will blink at
where <-3> or <+3> is displayed.)
97
a: Manual Exposure
Y
displayed on the LCD monitor.
P
Elapsed exposure time
C O
During bulb exposures, do not point the lens toward the sun. The sun’s
heat can damage the camera’s internal components.
Since bulb exposures produce more noise than usual, the image might
look a little grainy.
You can reduce the noise due to long exposures by setting [3: Long exp.
noise reduction] to [1: Auto] or [2: On] in the [7 Custom Functions
(C.Fn)] (p.219).
For bulb exposures, using a tripod and Remote Switch (sold separately,
p.229) is recommended.
98
8: Automatic Depth-of-Field AE
Objects in the foreground and background will be in focus automatically.
All the AF points will function to detect the subject, and the aperture
required to attain the necessary depth of field will be set automatically.
* <8> stands for Auto-Depth of field. This mode sets the depth of field
automatically.
Y
points flashing in red will be in focus.
P
If focus is not achieved, the picture
cannot be taken.
FAQ C
The aperture display in the viewfinder blinks.
The exposure is correct, but the desired depth of field cannot be
obtained. Either use a wide-angle lens or move farther away from
the subjects.
The shutter speed display in the viewfinder blinks.
If the “30"” shutter speed blinks, it means that the subject is too dark.
Increase the ISO speed. If the “4000” shutter speed blinks, it means
that the subject is too bright. Decrease the ISO speed.
A slow shutter speed has been set.
Use a tripod to steady the camera.
I want to use flash.
Flash can be used, however, the result will be the same as using the
<d> mode with flash. The desired depth of field will not be obtained.
99
q Changing the Metering ModeN
Three methods (metering modes) to measure the subject’s brightness
are provided. Normally, evaluative metering is recommended.
In Basic Zone modes, evaluative metering is set automatically.
2 SetSelect
the metering mode.
the desired metering mode,
then press <0>.
q Evaluative metering
Y
This is an all-around metering mode suited for
P
portraits and even backlit subjects. The camera
sets the exposure automatically to suit the
scene.
C O
w Partial metering
Effective when the background is much brighter
than the subject due to backlighting, etc. The
gray area in the left figure is where the
brightness is metered to obtain the standard
exposure.
With q, the exposure setting will be locked when you press the shutter
button halfway and focus is achieved. With w and e, the exposure setting
is set at the moment of exposure. (The exposure setting is not locked when
you press the shutter button halfway.)
100
Setting Exposure CompensationN
O Setting Exposure Compensation
Set exposure compensation if the exposure (without flash) does not come out
as desired. This feature can be used in Creative Zone modes (except <a>).
You can set the exposure compensation up to ±5 stops in 1/3-stop increments.
Making it brighter:
Hold down the <O> button and
turn the <6> dial to the right.
(Increased exposure)
Making it darker:
Hold down the <O> button and
Increased exposure for a brighter image turn the <6> dial to the left.
(Decreased exposure)
PY
X As shown in the figure, the exposure
level is displayed on the LCD monitor
O
and in the viewfinder.
Decreased exposure for a darker image
C
After taking the picture, cancel the
exposure compensation by setting
it back to 0.
2 Select [y].
Press the <S> key to select [y*].
X [Flash exposure comp.] will be
Y
displayed at the bottom.
3 Set
P
the flash exposure
O
compensation amount.
C
To make the flash exposure brighter,
turn the <6> dial to the right.
(Increased exposure)
To make it darker, turn the <6> dial
to the left. (Decreased exposure)
X When you press the shutter button
halfway, the <y> icon will appear in
the viewfinder.
After taking the picture, cancel the
flash exposure compensation by
setting it back to 0.
You can also set flash exposure compensation with [Built-in flash func.
setting] in [1 Flash control] (p.167).
102
3 Auto Exposure BracketingN
This feature takes exposure compensation a step further by varying the
exposure automatically (up to ±2 stops in 1/3-stop increments) with
three shots as shown below. You can then choose the best exposure.
This is called AEB (Auto Exposure Bracketing).
PY
comp./AEB], then press <0>.
2 SetTurn
the AEB amount.
3 TakeFocus
the picture.
and press the shutter button
completely. The three bracketed
shots will be taken in this sequence:
Standard exposure, decreased
exposure, and increased exposure.
103
3 Auto Exposure BracketingN
Canceling AEB
Follow steps 1 and 2 to turn off the AEB amount display.
The AEB setting will also be canceled automatically if the power
switch is set to <2>, flash recycling is completed, etc.
Shooting Tips
Using AEB with continuous shooting:
If <i> continuous shooting (p.86) has been set and you press the
shutter button completely, the three bracketed shots will be taken
continuously in this sequence: Standard exposure, decreased
exposure, and increased exposure.
Using AEB with <u> single shooting:
Press the shutter button three times to take the three bracketed
PY
shots. The three bracketed shots will be exposed in the following
sequence: Standard exposure, decreased exposure, and increased
O
exposure.
C
Using AEB with the self-timer:
If you use the self-timer <j> <l> (p.87), the three bracketed
shots will be taken continuously after 10 sec. or 2 sec. With <q>
(p.87) set, the number of continuous shots will be three times the
number set.
104
A Locking the ExposureN
You can lock the exposure when the area of focus is to be different from
the exposure metering area or when you want to take multiple shots at
the same exposure setting. Press the <A> button to lock the exposure,
then recompose and take the shot. This is called AE (autoexposure)
lock. It is effective for backlit subjects.
Y
Each time you press the <A> button,
P
it locks the current autoexposure
O
setting.
AE Lock Effects
105
A Locking the Flash ExposureN
If the subject is on the side of the frame and you use flash, the subject may
turn out to be too bright or dark depending on the background, etc. This is
when you should use FE lock. After setting the proper flash exposure for
the subject, you can recompose (put the subject toward the side) and
shoot. This feature can also be used with a Canon EX-series Speedlite.
* FE stands for Flash Exposure.
P
Aim the viewfinder center over the
O
subject where you want to lock the flash
exposure, then press the <A> button.
4 TakeCompose
the picture.
the shot and press the
shutter button completely.
X The flash is fired when the picture is
taken.
If the subject is too far away and beyond the effective range of the flash, the
<D> icon will blink. Get closer to the subject and repeat steps 2 to 4.
106
3 Correcting the Brightness and Contrast AutomaticallyN
If the image comes out dark or the contrast is low, the brightness and
contrast can be corrected automatically. This feature is called Auto
Lighting Optimizer. The default setting is [Standard]. With JPEG images,
the correction is done when the image is captured. For RAW images, it can
be corrected with Digital Photo Professional (provided software, p.270).
3 TakeThetheimage
picture.
C O necessary.
107
3 Correcting the Image’s Dark Corners
Due to the lens characteristics, the four corners of the picture might look
darker. This phenomenon is called lens light fall-off or drop in peripheral
illumination and can be corrected automatically. The default setting is
[Enable]. With JPEG images, the correction is done when the image is
captured. For RAW images, it can be corrected with Digital Photo
Professional (provided software, p.270).
PY
[Correction data available] is
displayed for the attached lens.
O
If [Correction data not available] is
displayed, see “About the Lens
3 TakeThetheimage
picture.
will be recorded with the
corrected peripheral illumination.
108
3 Correcting the Image’s Dark Corners
PY
C O
For JPEG images already captured, lens peripheral illumination
correction cannot be applied.
Depending on shooting conditions, noise might appear on the image
periphery.
When using a non-Canon lens, setting the correction to [Disable] is
recommended, even if [Correction data available] is displayed.
109
A Customizing Image CharacteristicsN
You can customize a Picture Style by adjusting individual parameters
like [Sharpness] and [Contrast]. To see the resulting effects, take test
shots. To customize [Monochrome], see page 112.
Y
X The Detail set. screen will appear.
3 O P
Select a parameter.
4 SetPress
the parameter.
the <U> key to adjust the
parameter as desired, then press
<0>.
Press the <M> button to save
the adjusted parameters. The Picture
Style selection screen will reappear.
X Any parameter settings different from
the default will be displayed in blue.
110
A Customizing Image CharacteristicsN
PY
The image’s color saturation can be adjusted.
O
To decrease the color saturation, set it toward the minus end. The
closer it is to G, the more diluted the colors will look.
C
To increase the color saturation, set it toward the plus end. The
closer it is to H, the bolder the colors will look.
Color tone
The skin tones can be adjusted.
To make the skin tone redder, set it toward the minus end. The
closer it is to G, the redder the skin tone will look.
To make the skin tone less red, set it toward the plus end. The closer
it is to H, the more yellow the skin tone will look.
111
A Customizing Image CharacteristicsN
V Monochrome Adjustment
For Monochrome, you can also set [Filter effect] and [Toning effect] in
addition to [Sharpness] and [Contrast] explained on the preceding
page.
kFilter Effect
With a filter effect applied to a
monochrome image, you can make
white clouds or green trees stand out
more.
Y
Filter Sample Effects
P
N: None Normal black-and-white image with no filter effects.
O
The blue sky will look more natural, and the white clouds will look
Ye: Yellow
crisper.
C
The blue sky will look slightly darker. The sunset will look more
Or: Orange
brilliant.
The blue sky will look quite dark. Fall leaves will look crisper and
R: Red
brighter.
Skin tones and lips will look fine. Tree leaves will look crisper and
G: Green
brighter.
Increasing the [Contrast] will make the filter effect more pronounced.
lToning Effect
By applying a toning effect, you can
create a monochrome image in that
color. It can make the image look more
impressive.
You can select the following: [N:None],
[S:Sepia], [B:Blue], [P:Purple] or
[G:Green].
112
A Registering Preferred Image CharacteristicsN
You can select a base Picture Style such as [Portrait] or [Landscape],
adjust its parameters as desired and register it under [User Def. 1],
[User Def. 2], or [User Def. 3].
You can create Picture Styles whose parameter settings such as
sharpness and contrast are different. You can also adjust the
parameters of a Picture Style which has been registered to the camera
with EOS Utility (provided software, p.270).
Y
Select [User Def. *], then press the
P
<B> button.
O
X The Detail set. screen will appear.
C3 Press <0>.
With [Picture Style] selected, press
<0>.
5 Select a parameter.
Select a parameter such as
[Sharpness], then press <0>.
6 SetPress
the parameter.
the <U> key to adjust the
parameter as desired, then press
<0>.
For details, see “Customizing Image
Characteristics” on pages 110-112.
PY
Press the <M> button to register
O
the modified Picture Style. The
Picture Style selection screen will
C then reappear.
X The base Picture Style will be
indicated on the right of [User Def. *].
X The name of the Picture Style having
any modified settings (different from
the default) registered under [User
Def. *] will be displayed in blue.
If a Picture Style has already been registered under [User Def. *],
changing the base Picture Style in step 4 will nullify the parameter
settings of the registered Picture Style.
If you execute [Clear all camera settings] (p.164), all the [User Def. *]
settings will revert to the default. Any Picture Style registered via EOS
Utility (provided software) will have only its modified parameters reverted
to the default setting.
114
B: Matching the Light SourceN
The function adjusting the color tone so that white objects look white in
the picture is called white balance (WB). Normally, the <Q> (Auto)
setting will obtain the correct white balance. If natural-looking colors
cannot be obtained with <Q>, you can select the white balance to
match the light source or set it manually by shooting a white object.
Y
balance settings <W>, <E>,
P
<R>, <Y> or <U> is the
O
respective color temperature.
115
B: Matching the Light SourceN
4 Select PY
<M> button to exit the menu.
the custom white balance.
C O
Press the <XB> button.
Select [O], then press <0>.
116
2 Adjusting the Color Tone for the Light SourceN
You can correct the white balance that has been set. This adjustment
will have the same effect as using a commercially-available color
temperature conversion filter or color compensating filter. Each color
can be corrected to one of nine levels.
This is for advanced users who are familiar with using color temperature
conversion or color compensating filters.
PY
2 SetPress
the white balance correction.
O
the <S> key to move the “ ”
C
mark to the desired position.
B is for blue, A is amber, M is
magenta, and G is green. The color in
the respective direction will be
Sample setting: A2, G1 corrected.
On the upper right, “Shift” indicates
the direction and correction amount.
Pressing the <B> button will
cancel all the [WB Shift/BKT]
settings.
Press <0> to exit the setting and
return to the menu.
117
2 Adjusting the Color Tone for the Light SourceN
PY
X On the right, “Bracket” indicates the
bracketing direction and correction amount.
O
Pressing the <B> button will cancel
C
all the [WB Shift/BKT] settings.
Press <0> to exit the setting and
return to the menu.
Bracketing Sequence
The images will be bracketed in the following sequence: 1. Standard
white balance, 2. Blue (B) bias, and 3. Amber (A) bias, or 1. Standard
white balance, 2. Magenta (M) bias, and 3. Green (G) bias.
You can also set white balance correction and AEB (p.103) together with
white balance bracketing. If you set AEB in combination with white balance
bracketing, a total of nine images will be recorded for a single shot.
Since three images are recorded for one shot, the card will take longer to
record the shot.
“BKT” stands for Bracketing.
118
3 Setting the Color Reproduction RangeN
The range of reproducible colors is called the color space. With this
camera, you can set the color space to sRGB or Adobe RGB for
captured images. For normal shooting, sRGB is recommended.
In Basic Zone modes, sRGB is set automatically.
2 SetSelect
the desired color space.
[sRGB] or [Adobe RGB], then
press <0>.
PY
O
About Adobe RGB
C
This color space is mainly used for commercial printing and other
industrial uses. This setting is not recommended if you do not know
about image processing, Adobe RGB, and Design rule for Camera File
System 2.0 (Exif 2.21).
The image will look very subdued in a sRGB personal computer
environment and with printers not compatible with Design rule for
Camera File System 2.0 (Exif 2.21). Post-processing of the image with
software will therefore be required.
If the image is captured with the color space set to Adobe RGB, the file
name will start with “_MG_” (first character is an underscore).
The ICC profile is not appended. See explanations about the ICC profile
in the Software Instruction Manual (p.272) in the CD-ROM.
119
PY
C O
120
Shooting with the LCD Monitor
(Live View Shooting)
PY
You can shoot while viewing the image on the camera’s
LCD monitor. This is called “Live View shooting”.
not move. O
Live View shooting is effective for still subjects which do
C
If you handhold the camera and shoot while viewing the
LCD monitor, camera shake can cause blurred images.
Using a tripod is recommended.
3 TakePress
PY
the picture.
O
the shutter button completely.
X The picture will be taken and the
122
A Shooting with the LCD Monitor
Y
At 0°C / 32°F 230 210
P
The figures above are based on a fully-charged Battery Pack LP-E10 and
CIPA (Camera & Imaging Products Association) testing standards.
O
With a fully-charged Battery Pack LP-E10, continuous Live View shooting is
C
possible for approx. 2 hr. at 23°C / 73°F and approx. 1 hr. 40 min. at
0°C / 32°F.
During Live View shooting, do not point the lens toward the sun. The
sun’s heat can damage the camera’s internal components.
Cautions for using Live View shooting are on pages 136-137.
When flash is used, there will be two shutter sounds, but only one shot
will be taken.
If the camera is not operated for a prolonged period, the power will turn
off automatically as set with [5 Auto power off] (p.155). If [5 Auto
power off] is set to [Off], the Live View function will terminate
automatically after 30 min. (camera power remains on).
With an HDMI cable (sold separately), you can display the Live View
image on a TV (p.191).
123
A Shooting with the LCD Monitor
Y
Image-recording AEB
P
quality Exposure
simulation
O
AE lock
C
r Flash-ready
b Flash off Battery check
When <g> is displayed in white, it indicates that the Live View image
brightness is close to what the captured image will look like.
If <g> is blinking, it indicates that the Live View image is not being
displayed at the suitable brightness due to low- or bright-light conditions.
However, the actual image recorded will reflect the exposure setting.
If flash is used or bulb is set, the <g> icon and histogram will be
grayed out (for your reference). The histogram might not be properly
displayed in low- or bright-light conditions.
124
A Shooting with the LCD Monitor
PY
O
Depth of field preview (With C.Fn-8-5 set and <0> ON)
Auto Lighting Optimizer
C
Peripheral illumination correction
Highlight tone priority
125
Shooting Function Settings
Function settings particular to Live View shooting are explained here.
Q Quick Control
While the image is displayed on the LCD monitor in Creative Zone
modes, pressing the <Q> button will enable you to set the AF mode,
drive mode, white balance, Picture Style, Auto Lighting Optimizer,
image-recording quality, and ISO speed. In Basic Zone modes, you can
set the AF mode and the settings shown in the table on page 63.
Press the <Q> button.
1 X The functions settable with Quick
Control will appear on the left of the
screen.
If the AF mode is <f>, the AF
Y
point will also be displayed. You can
P
also select the AF point.
2 Select
O
a function and set it.
C
Press the <V> key to select a
function.
X The selected function and Feature
guide (p.47) will appear.
Press the <U> key or turn the
<6> dial to change the setting.
Pressing <0> will display the
respective function’s setting screen.
In Creative Zone modes, if [9: Flash button function] is set to [1: ISO
speed] in [7 Custom Functions (C.Fn)], you can raise the built-in flash
with Quick Control. The ISO speed will be set with the <r> button.
126
z Menu Function Settings
The menu options below are displayed.
In Basic Zone modes, the Live View
menu options will be displayed under
[2], and in Creative Zone modes, they
will be displayed under [z].
PY
With [Grid 1l] or [Grid 2m], you can display grid lines. It can
help you level the camera vertically or horizontally.
Metering timerN
C O
You can change how long the exposure setting is displayed (AE lock
time). This option is not displayed in Basic Zone modes. (Metering
timer is fixed at 16 sec.)
The settings for these menu options will apply only to Live View
shooting. They do not take effect during viewfinder shooting.
If you select [y Dust Delete Data], [6 Clean manually], [7 Clear
settings], or [7 Firmware Ver.], the Live View shooting will terminate.
127
Changing the Autofocus Mode
Y
Quick Control screen (p.126).
Live Mode: d
O P
C
The image sensor is used to focus. Although AF is possible with the
Live View image displayed, the AF operation will take longer than
with the Quick mode. Also, achieving focus may be more difficult than
with the Quick mode.
4 TakeCheck
the picture.
the focus and exposure, then
press the shutter button completely to
take the picture (p.122).
PY
C O
u (Face detection) Live Mode: c
With the same AF method as the Live mode, human faces are detected
and focused. Have the target person face the camera.
129
Changing the Autofocus Mode
3 TakeCheck
the picture.
Y
the focus and exposure, then
press the shutter button completely to
P
take the picture (p.122).
O
C
If the focus is way off, face detection will not be possible. If the lens
enables manual focusing even while the lens focus mode switch is set to
<f>, turn the focusing ring to attain rough focus. The face will then be
detected and <p> will be displayed.
An object other than a human face might be detected as a face.
Face detection will not work if the face is very small or large in the picture,
too bright or too dark, titled horizontally or diagonally, or partially hidden.
The <p> focusing frame might cover only part of the face.
When you press <0>, the AF mode will switch to the Live mode
(p.128). You can press the <S> key to move the AF point. Press <0>
again to return to the u (face detection) Live mode. (If C.Fn-8 has been
set, press <O> + <0>.)
Since AF is not possible with a face detected near the edge of the
picture, the <p> will be grayed out. Then if you press the shutter button
halfway, the center AF point < > will be used to focus.
130
Changing the Autofocus Mode
Y
return to the normal view and autofocus. Note that the AF speed
may differ between the normal and magnified views.
O
the image, the focus might be off.
P
If you autofocus in the Live mode’s normal view and then magnify
C
In the u Live mode, pressing the <u> button will not magnify the
image.
131
Changing the Autofocus Mode
Y
animal in a cage).
Subjects which keep moving within the AF point and cannot keep
O P
still due to camera shake or subject blur.
A subject approaching or moving away from the camera.
C
Autofocusing while the subject is way out of focus.
Soft focus effect is applied with a soft focus lens.
A special effects filter is used.
132
Changing the Autofocus Mode
Quick Mode: f
The dedicated AF sensor is used to focus in One-Shot AF mode (p.81),
using the same AF method as with viewfinder shooting.
Although you can focus the target area quickly, the Live View image
will be interrupted momentarily during the AF operation.
Magnifying frame
PY
O
the AF point. N
2 Select
C
Press the <Q> button (7) to
display the Quick Control screen.
X The settable functions will be
displayed on the left of the screen.
Press the <V> key to make the AF
point selectable.
Turn the <6> dial to select the AF
point.
133
Changing the Autofocus Mode
4 TakeCheck
the picture.
O
take the picture (p.122).
You cannot take a picture during autofocusing. Take the picture while the
Live View image is displayed.
134
MF: Focusing Manually
You can magnify the image and focus precisely manually.
Y
been set, press <O> + <0>.)
P
3 Magnify the image.
O
Press the <u> button.
X The area within the magnifying frame
C will be magnified.
Each time you press the <u> button,
the view will change as follows:
5x 10x Normal view
4 Focus manually.
While looking at the magnified image,
turn the lens focusing ring to focus.
After achieving focus, press the <u>
AE lock button to return to the normal view.
Magnified area position
Magnification 5 TakeCheck
the picture.
the focus and exposure, then
press the shutter button to take the
picture (p.122).
135
Live View Shooting Cautions
White <s> and Red <E> Internal Temperature Warning Icons
If the camera’s internal temperature increases due to prolonged Live
View shooting or a high ambient temperature, a white <s> icon will
appear. If you continue shooting while this icon is displayed, the image
quality of still photos may deteriorate. You should stop the Live View
shooting and allow the camera to cool down before shooting again.
If the camera’s internal temperature further increases while the white
<s> icon is displayed, a red <E> icon will start blinking. This blinking
icon is a warning that the Live View shooting will soon be terminated
automatically. If this happens, you will not be able to shoot again until the
camera’s internal temperature decreases. Turn off the power and let the
camera rest for a while.
Shooting with the Live View function at a high temperature for a
prolonged period will cause the <s> and <E> icons to appear earlier.
PY
When not shooting, turn off the camera.
O
Under low- or bright-light conditions, the Live View image might not
reflect the brightness of the captured image.
C
If the light source within the image changes, the screen might flicker. If
this happens, stop the Live View shooting and resume shooting under
the actual light source to be used.
If you point the camera in a different direction, it might throw off the Live
View image’s correct brightness momentarily. Wait until the brightness
level stabilizes before shooting.
If there is a very bright light source in the picture, such as the sun, the
bright area might appear black on the LCD monitor. However, the actual
captured image will correctly show the bright area.
In low light, if you set the [6 LCD brightness] to a bright setting,
chrominance noise may appear in the Live View image. However, the
chrominance noise will not be recorded in the captured image.
When you magnify the image, the image sharpness may look more
pronounced than it really is.
136
Live View Shooting Cautions
Shooting Result Cautions
When you shoot continuously with the Live View function for a long
period, the camera’s internal temperature may increase and it can
degrade image quality. Terminate Live View shooting when not shooting
images.
Before taking a long exposure, stop Live View shooting temporarily and
wait several minutes before shooting. This is to prevent image
degradation.
Live View shooting in high temperatures and at high ISO speeds may
cause noise or irregular colors.
When you shoot at high ISO speeds, noise (banding, dots of light, etc.)
may become noticeable.
If you take the picture during magnified view, the exposure might not
come out as desired. Return to the normal view before taking the picture.
PY
During the magnified view, the shutter speed and aperture will be
displayed in orange. Even if you take the picture during magnified view,
O
the image will be captured in the normal view.
If [2 Auto Lighting Optimizer] (p.107) is not set to [Disable], the
C
image may look bright even if a decreased exposure compensation or
decreased flash exposure compensation has been set.
If you use a TS-E lens to shift the lens vertically or use an Extension
Tube, the standard exposure might not be obtained or an irregular
exposure may result.
Custom Function Cautions
During Live View shooting, certain Custom Function settings will not take
effect (p.217).
Lens and Flash Cautions
The focus preset feature on super telephoto lenses cannot be used.
FE lock is not possible when the built-in flash or an external Speedlite is
used. Modeling flash will not work with an external Speedlite.
137
PY
C O
138
Shooting Movies
PY
When you set the Mode Dial to
<k>, you can shoot High-
C O
Definition (HD) movies. The
movie recording format will be
MOV.
3 Shoot Y
the movie.
P
Press the <A> button to start
Recording movie
C O
shooting a movie. To stop movie
shooting, press <A> again.
X While the movie is being shot, the
“o” mark will be displayed on the
upper right of the screen.
Microphone
140
k Shooting Movies
In the movie shooting mode, you cannot take a still photo even if you
press the shutter button completely.
During movie shooting, do not point the lens toward the sun. The sun’s
heat can damage the camera’s internal components.
Cautions for movie shooting are on pages 150 and 151.
If necessary, also read the Live View shooting cautions on pages
136 and 137.
Y
When you press the shutter button halfway, the exposure setting
P
displayed at the screen bottom is for your reference.
The sound will be recorded by the camera’s built-in monaural
microphone (p.140).
C O
The sound recording level will be adjusted automatically.
With a fully-charged Battery Pack LP-E10, the total shooting time will be
as follows: At 23°C/73°F: Approx. 1 hr. 50 min., At 0°C/32°F: Approx.
1 hr. 30 min.
141
k Shooting Movies
Y
White balance
P
Picture Style
Auto Lighting
Optimizer
If there is no card in the camera, the movie shooting remaining time will
be displayed in red.
When movie shooting starts, the movie shooting remaining time will
change to the elapsed time.
142
k Shooting Movies
PY
O
Highlight tone priority
143
Shooting Function Settings
Function settings particular to movie shooting are explained here.
Q Quick Control
While the movie image is displayed on the LCD monitor, you can press
the <Q> button to enable the following to be set: AF mode, white
balance, Picture Style, and Auto Lighting Optimizer.
2 Select
Y
a function and set it.
P
Press the <V> key to select a
O
function.
C
X The selected function and Feature
guide (p.47) will appear.
Press the <U> key or turn the
<6> dial to change the setting.
Pressing <0> will display the
respective function’s setting screen.
144
3 Menu Function Settings
The menu options displayed under the [w], [x], and [y] tabs are
explained below.
[w] tab
AF mode
The AF modes will be the same as described on pages 128-134.
You can select [Live mode], [u Live mode], or [Quick mode]. Note
that continuous focusing of a moving subject is not possible.
AF with shutter button during k (movie recording)
PY
When [Enable] is set, AF is possible during movie shooting.
However, continuous autofocusing is not possible. If you autofocus
O
during movie shooting, you might momentarily throw the focus way
C
off or change the exposure. The movie will also record the lens
operation noise.
During movie shooting, if the [Quick mode] AF mode is set, AF will
be executed in [Live mode].
The settings under the [w/x/y] menu tabs will take effect only
in the <k> mode. They will not be applied in shooting modes other
than the <k> mode.
The [AF mode] setting will also be applied to Live View shooting.
145
3 Menu Function Settings
Y
the autofocus by holding down the <w> button. You can resume
P
the autofocus by letting go of the <w> button. AE lock is not
possible.
• AE/AF, no AE lock:
C O
Press the shutter button halfway for metering. For AF, press the
<w> button. AE lock is not possible.
kHighlight tone priority
If [Enable] is set, highlight detail will be improved. The dynamic
range is expanded from the standard 18% gray to bright highlights.
The gradation between the grays and highlights becomes smoother.
The settable ISO speed range will be ISO 200-6400. The Auto
Lighting Optimizer will also be set automatically to [Disable] and
cannot be changed.
146
3 Menu Function Settings
[x] tab
Y
Russia, China, Australia, etc.).
O P
Total Movie Recording Time and File Size per Minute
Due to the file system, movie shooting will stop automatically if the
C
file size of a single movie clip reaches 4GB.
You can immediately resume shooting another movie by pressing
the <A> button. (A new movie file starts being recorded.)
Movie-recording Total Recording Time (approx.) File Size
Size 4GB Card 8GB Card 16GB Card (approx.)
[1280x720] 65 17 min. 34 min. 1 hr. 8 min. 222.6 MB/min.
147
3 Menu Function Settings
Sound recording
When the sound recording is set to [On], sound will be recorded by
the built-in monaural microphone. The sound recording level will be
adjusted automatically. An external microphone cannot be used.
Metering timer
You can change how long the exposure setting is displayed (AE lock
time).
Grid display
With [Grid 1l] or [Grid 2m], you can display grid lines. It can
help you level the camera vertically or horizontally.
PY
C O
148
3 Menu Function Settings
[y] tab
Exposure compensation
You can set exposure compensation for movies up to ±3 stops in
1/3-stop increments.
Auto Lighting Optimizer
The Auto Lighting Optimizer can be set as explained on page 107.
If the [w] menu tab’s [kHighlight tone priority] is set to
[Enable], the Auto Lighting Optimizer will be set automatically to
[Disable] and cannot be changed.
Custom White Balance
PY
As explained on page 115, the image for custom white balance can
O
be selected. Note that still photos cannot be taken in the <k>
C
mode. Set a shooting mode other than <k> and take a still photo.
Then select it for the custom white balance.
Picture Style
The Picture Style can be set as explained on pages 79.
149
About the Red <E> Internal Temperature Warning Icon
If the camera’s internal temperature is high, a blinking red icon <E> may
appear. This blinking icon is a warning that the movie shooting will soon
be terminated automatically. If this happens, you will not be able to shoot
again until the camera’s internal temperature decreases. Turn off the
power and let the camera rest for a while.
Movie shooting at a high temperature for a prolonged period will cause
the <E> icon to appear sooner. When not shooting, turn off the camera.
Y
shorten the total movie shooting time or decrease the number of possible
P
shots. If you use a tripod or if the Image Stabilizer is not necessary, you
should set the IS switch to <2>.
O
The camera’s built-in microphone will also record camera operation
C
noise.
If movie shooting is not possible due to insufficient remaining capacity of
the card, the movie recording size and movie shooting remaining time
(p.142) will be displayed in red.
If you use a card having a slow writing speed, a five-level
indicator might appear on the right of the screen during
movie shooting. It indicates how much data has not yet been
written to the card (remaining capacity of the internal buffer
memory). The slower the card, the faster the indicator will
climb upward. If the indicator becomes full, movie shooting
will stop automatically. Indicator
If the card has a fast writing speed, the indicator will either
not appear or the level (if displayed) will hardly go upward.
First, shoot a few test movies to see if the card can write fast enough.
150
Movie Shooting Cautions
Playback and TV connection
If the brightness changes during movie shooting, that part might look
momentarily still when you playback the movie.
If you connect the camera to a TV set with an HDMI cable (p.191) and
shoot a movie, the movie being shot will be displayed at a small size on
the TV. But the movie will still be properly recorded in High-Definition
(HD) quality.
If you connect the camera to a TV set and shoot a movie, the TV will not
output any sound during the shooting. However, the sound will be
properly recorded.
PY
C O
151
PY
C O
152
Handy Features
PY
O
Card Reminder (p.154)
C
Setting the Image Review Time (p.154)
Setting the Auto Power-off Time (p.155)
Adjusting the LCD Monitor Brightness (p.155)
Creating and Selecting a Folder (p.156)
File Numbering Methods (p.158)
Setting Copyright Information (p.160)
Auto Rotation of Vertical Images (p.162)
Checking Camera Settings (p.163)
Reverting the Camera to the Default Settings (p.164)
Turning the LCD Monitor Off/On (p.166)
Changing the Shooting Settings Screen Color (p.166)
Setting the Flash (p.167)
Appending Dust Delete Data (p.171)
Manual Sensor Cleaning (p.173)
153
Handy Features
3 Silencing the Beeper
You can prevent the beeper from sounding when focus is achieved or
during self-timer operation.
Under the [1] tab, select [Beep], then
press <0>. Select [Disable], then
press <0>.
3 Card Reminder
This prevents shooting if there is no card in the camera.
Under the [1] tab, select [Release
shutter without card], then press
Y
<0>. Select [Disable], then press
P
<0>.
If there is no card installed and you press
C O
the shutter button, “Card” will be
displayed in the viewfinder, and you
cannot release the shutter.
154
Handy Features
Y
off], then press <0>. Select the desired
P
setting, then press <0>.
C O
3 Adjusting the LCD Monitor Brightness
You can adjust the brightness of the LCD monitor to make it easier to read.
Under the [6] tab, select [LCD
brightness], then press <0>. With the
adjustment screen displayed, press the
<U> key to adjust the brightness, then
press <0>.
When checking the exposure of an
image, set the LCD monitor brightness to
4 and prevent the ambient light from
affecting the reviewed image.
155
Handy Features
Create a Folder
Select [Select folder].
1 Under the [5] tab, select [Select
folder], then press <0>.
2 Select
PY
[Create folder].
O
Select [Create folder], then press
<0>.
C
3 Create a new folder.
Select [OK], then press <0>.
X A new folder with a higher one-up
folder number is created.
156
Handy Features
Selecting a Folder
Lowest file number With the folder selection screen
Number of images displayed, select a folder and press
in folder <0>.
X The folder where the captured
images will be saved is selected.
Subsequent captured images will be
recorded into the selected folder.
Folder name
Highest file number
PY
About Folders C O
As with “100CANON” for example, the folder name starts with three digits
(folder number) followed by five alphanumeric characters. A folder can contain
up to 9999 images (file No. 0001 - 9999). When a folder becomes full, a new
folder with a higher one-up folder number is created automatically. Also, if
manual reset (p.159) is executed, a new folder will be created automatically.
Folders numbered from 100 to 999 can be created.
157
Handy Features
Y
[Continuous]: The file numbering continues in sequence even
P
after you replace the card or create a folder.
Even after you replace the card or create a new folder, the file
O
numbering continues in sequence up to 9999. This is convenient
C
when you want to save images numbered anywhere between 0001
to 9999 in multiple cards or folders into one folder in your personal
computer.
If the replacement card or existing folder already contains images
recorded previously, the file numbering of the new images might
continue from the file numbering of the existing images in the card or
folder. If you want to use continuous file numbering, you should use
a newly-formatted card each time.
File numbering after File numbering after
replacing the card creating a folder
Card-1 Card-2 Card-1
100 101
158
Handy Features
XXX-0051
PY
100-0001 XXX-0051 XXX-0001
O
File numbering is reset
C
[Manual reset]: To reset the file numbering to 0001 manually or
to start from file number 0001 in a new folder.
When you reset the file numbering manually, a new folder is created
automatically and the file numbering of images saved to that folder
starts from 0001.
This is convenient if you want to use different folders for the images
taken yesterday and the ones taken today, for example.
After the manual reset, the file numbering returns to continuous or
auto reset. (There will be no Manual reset confirmation screen.)
If the file number in folder No. 999 reaches 9999, shooting will not be
possible even if the card still has storage capacity. The LCD monitor will
display a message telling you to replace the card. Replace it with a new
card.
For both JPEG and RAW images, the file name will start with “IMG_”. Movie
file names will start with “MVI_”. The extension will be “.JPG” for JPEG
images, “.CR2” for RAW images, and “. MOV” for movies.
159
Handy Features
Y
[Enter copyright details], then press
P
<0>.
X The text entry screen will appear.
C O
Select [Display copyright info.] to
check the copyright information
currently set.
Select [Delete copyright
information] to delete the copyright
information currently set.
3 Enter text.
Refer to “Text Entry Procedure” on
the next page and enter the copyright
information.
Enter up to 63 alphanumeric
characters and symbols.
4 ExitAfter
the setting.
entering the text, press the
<M> button to exit.
160
Handy Features
Y
Press the <L> button to delete one character.
P
Exiting:
O
After entering the text, press the <M> button to finalize the text
entry and return to the screen in step 2.
C
Canceling the text entry:
To cancel the text entry, press the <B> button to cancel it and
return to the screen in step 2.
You can also set or check the copyright information with EOS Utility
(provided software, p.270).
161
Handy Features
Y
: The vertical image is automatically rotated only on the
computer.
P
O
[Off] : The vertical image is not automatically rotated.
FAQ
C
The vertical image is not rotated during the image review
immediately after it is captured.
Press the <x> button and the image playback will display the
rotated image.
[OnPD] is set, but the image does not rotate during playback.
Auto rotate will not work with vertical images captured while [Auto
rotate] was set to [Off]. If the vertical image is taken while the camera
is pointed up or down, the image might not be rotated automatically for
playback. In such a case, see “Rotating the Image” on page 179.
On the camera’s LCD monitor, I want to rotate an image
captured when [OnD] had been set.
Set [OnPD], then playback the image. It will be rotated.
The vertical image does not rotate on the computer screen.
The software used is not compatible with image rotation. Use the
software provided with the camera instead.
162
Handy Features
Settings display
Card remaining capacity
Y
Color space (p.119)
P
WB correction (p.117)/
WB bracketing (p.118)
Date/Time (p.33)
Beeper (p.154)
163
Handy Features
PY
C
3 SelectO[OK].
Select [OK], then press <0>.
X Setting [Clear all camera settings]
will reset the camera to the default
settings on the next page.
FAQ
164
Handy Features
Y
Auto power off 30 sec. Dust Delete Data Erased
P
Beep Enable
Release shutter Movie Shooting Settings
O
Enable
without card AF mode Live mode
C
Image review 2 sec. AF w/ shutter
Disable
Histogram Brightness button during k
Image jump w/6 e (10 images) kShutter/AE lock
AF/AE lock
Auto rotate OnzD button
LCD brightness kHighlight tone
Disable
LCD off/on button Shutter button priority
Date/Time Unchanged Movie recording size Unchanged
Language Unchanged Sound recording On
Feature guide Enable Metering timer 16 sec.
Copyright information Unchanged Grid display Off
Control over HDMI Disable Exposure
Canceled
Eye-Fi transmission Disable compensation
My Menu settings Unchanged Auto Lighting
Standard
Optimizer
Live View Shooting Settings Custom white
Canceled
Live View shooting Enable balance
AF mode Live mode Picture Style Standard
Grid display Off
Metering timer 16 sec.
165
Handy Features
[Shutter btn.] : When you press the shutter button halfway, the
display will turn off. And when you let go of the
shutter button, the display will turn on.
[Shutter/DISP]: When you press the shutter button halfway, the
display will turn off. And when you let go of the
Y
shutter button, the display will remain off. To turn on
P
the display, press the <B> button.
[Remains on] : Display remains on even when you press the shutter
button.
C O
button halfway. To turn off display, press the <B>
166
3 Setting the FlashN
The built-in flash and external Speedlite settings can be set with the
camera’s menu. You can use the camera’s menu to set the external
Speedlite function settings only if the attached EX-series Speedlite is
compatible with this function.
The setting procedure is the same as setting a camera menu function.
[Flash firing]
PY
Normally, set this to [Enable].
If [Disable] is set, neither the built-
O
in flash nor the external Speedlite
will fire. This is useful when you only
Even if [Flash firing] has been set to [Disable], if focus is difficult to achieve
in low light, the built-in flash may still fire a series of flashes (AF-assist
beam, p.84).
167
3 Setting the FlashN
Y
refer to the Speedlite’s instruction manual.
P
Flash mode
With an external Speedlite, you can select the flash mode suiting
your objective.
C O
[E-TTL II] is the standard mode of
EX-series Speedlites for automatic
flash shooting.
[Manual flash] enables you to set the
flash output yourself. This is for
advanced users.
For other flash modes, refer to your
Speedlite’s instruction manual.
168
3 Setting the FlashN
Shutter sync.
Normally, set this to [1st curtain] so that the flash fires immediately
after the exposure starts.
If [2nd curtain] is set, the flash will fire right before the exposure
ends. When this is combined with a slow sync speed, you can create
a trail of light such as from car headlights at night. With 2nd-curtain
sync, a preflash is fired when you press the shutter button
completely. This is to determine the exposure. Then immediately
before the exposure ends, the real flash is fired. Therefore, two
flashes will be fired. However, with shutter speeds faster than 1/30
sec., 1st curtain sync will automatically take effect.
If an external Speedlite is attached, you can also set [Hi-speed]. For
details, see the Speedlite’s instruction manual.
Flash exposure compensation
Y
See “y Flash Exposure Compensation” on page 102.
P
E-TTL II flash metering
O
For normal flash exposures, set it to [Evaluative]. [Average] is for
advanced users. As with an external Speedlite, the metering area is
169
3 Setting the FlashN
2 SetPress
the Custom Function.
the <U> key to select the
function number, then set the
Y
function. The procedure is the same
P
as setting the camera’s Custom
Functions (p.216).
C O
To clear all the Custom Function
settings, select [Clear ext. flash C.Fn
set.] in step 1.
170
3 Appending Dust Delete DataN
Dust entering the camera can adhere to the image sensor and cause
dust spots to be visible on the captured images. To erase these dust
spots, you can append the Dust Delete Data to the images. The Dust
Delete Data is used by Digital Photo Professional (provided software,
p.270) to erase the dust spots automatically.
Preparation
Get a solid-white object (paper, etc.).
Set the lens focal length to 50mm or longer.
Set the lens focus mode switch to <MF> and set the focus to infinity
(∞). If the lens has no distance scale, look at the front of the lens and
turn the focusing ring clockwise all the way.
1
PY
Select [Dust Delete Data].
Under the [y] tab, select [Dust
2 Select [OK].
Select [OK], then press <0>.
Instructions will appear.
171
3 Appending Dust Delete DataN
PY
message will appear.
Select [OK], and the menu will reappear.
O
If the data was not obtained
C
successfully, a message to that effect
will appear. Follow the “Preparation”
procedure on the preceding page, then
select [OK]. Take the picture again.
Be sure to use a solid-white object such as a new sheet of white paper. If the
paper has any pattern or design, it may be recognized as dust data and
affect the accuracy of the dust deletion with the software.
172
3 Manual Sensor CleaningN
If dust adhere to the image sensor and dust spots appear on the
images, you can clean the image sensor yourself with a camera blower.
The surface of the image sensor is extremely delicate. If the
sensor needs to be cleaned directly, having it done by a Canon
Service Center is recommended.
Before cleaning the sensor, detach the lens from the camera.
2 Select
Y
[OK].
P
Select [OK], then press <0>.
X In a moment, the reflex mirror will
4 EndSetthethecleaning.
power switch to <2>.
For the power source, using AC Adapter Kit ACK-E10 (sold separately)
is recommended.
If you use a battery, make sure it is fully recharged.
173
3 Manual Sensor CleaningN
Y
will sound as a warning. Stop cleaning the sensor.
P
If a smudge that cannot be removed with a blower remains, having the
sensor cleaned by a Canon Service Center is recommended.
C O
174
Image Playback
PY
This chapter explains features related to viewing photos
and movies, going into more detail than in Chapter 2
O
“Basic Shooting and Image Playback.” Here you will
C
find explanations about how to playback and erase
photos and movies with the camera and viewing them
on a TV set.
Y
appear. The currently-selected image
will be highlighted in a blue frame.
O P
Press the <I> button again to
switch to the 9-image index display.
C
Pressing the <u> button will switch
the display between 9 images, 4
images and one image displayed.
Î Î
3 Select an image.
Press the <S> key to move the blue
frame to select an image.
Turning the <6> dial will display the
next screen or previous image.
Press <0> and the selected image
will be displayed as a single image.
176
x Searching for Images Quickly
PY
f: Jump 100 images
g: Display by date
O
h: Display by folder
C
i: Display movies only
j: Display stills only
k: Display by image rating (p.180)
Turn the <6> dial to select the
rating.
3 Browse by jumping.
Press the <x> button to playback
images.
Jump method
On the single-image display, turn the
<6> dial.
Playback position
177
u/y Magnified View
You can magnify a shot image by 1.5x to 10x on the LCD monitor.
PY
2 Scroll
O
around the image.
Use the <S> key to scroll around the
C magnified image.
To exit the magnified display, press
the <x> button and the single image
display will return.
You can turn the <6> dial to view another image while the
magnification is maintained.
The image cannot be magnified during the image review immediately
after shooting.
A movie cannot be magnified.
178
b Rotating the Image
You can rotate the displayed image to the desired orientation.
Select [Rotate].
1 Under the [3] tab, select [Rotate],
then press <0>.
2 Select an image.
Press the <U> key to select the
image to be rotated.
You can also select an image on the
index display (p.176).
3 RotatePY
the image.
C O
Each time you press <0>, the
image will rotate clockwise as follows:
90° → 270° → 0°
To rotate another image, repeat steps
2 and 3.
To exit and return to the menu, press
the <M> button.
179
3 Setting Ratings
You can rate images and movies with one of five rating marks: l/m/
n/o/p.
Select [Rating].
1 Under the [4] tab, select [Rating],
then press <0>.
Y
pressing the <I> button. To
P
return to the single-image display,
press the <u> button.
3
C O
Rate the image or movie.
Press the <V> key to select a rating
mark.
X The total number of images and
movies rated will be counted for each
rating.
To rate another image or movie,
repeat steps 2 and 3.
To exit and return to the menu, press
the <M> button.
180
3 Setting Ratings
PY
C O
181
Q Quick Control During Playback
When you press the <Q> button during image playback, you can set
the following: [ Protect images, b Rotate, 9 Rating, e Image
jump w/6]. Note that movies cannot be rotated (b Rotate).
Y
X The name and current setting of the
P
selected function are displayed at the
bottom.
C O
Set it by pressing the <U> key.
3 ExitPress
the setting.
the <Q> button to turn off the
Quick Control icons and function
settings.
182
Q Quick Control During Playback
Pressing the <Q> button during the index display will switch to the
single-image display and the Quick Control icons will appear. Pressing
the <Q> button again will return to the index display.
For images taken with another camera, selectable functions may be
limited.
PY
C O
183
k Enjoying Movies
Basically, you can playback movies in the following three ways:
PY
The camera does not have an audio/video OUT terminal. Therefore, the
O
camera cannot be connected to a TV set with an analog AV cable.
C
Movies on a card can be played only by devices compatible with MOV
files.
Since hard disk recorders do not have an HDMI IN terminal, the camera
cannot be connected to a hard disk recorder with an HDMI cable.
Even if the camera is connected to a hard disk recorder with a USB
cable, movies and still photos cannot be played nor saved.
184
k Enjoying Movies
A movie edited with a personal computer cannot be rewritten to the card and
played back with the camera.
PY
(See the PDF file instruction manual for ZoomBrowser EX/ImageBrowser, p.272)
The movie files recorded in the card can
C O
be transferred to a personal computer
and played or edited with ZoomBrowser
EX/ImageBrowser (provided software,
p.270).
You can also extract a single frame from
a movie and save it as a still photo.
185
k Playing Movies
Playback the image.
1 Press the <x> button to display
images.
2 Select a movie.
Press the <U> key to select a
movie.
On the single-image display, the
<1s> icon displayed on the
upper left indicates a movie.
On the index display, the perforation
on the left edge of the image
PY
indicates a movie. As movies
cannot be played on the index
O
display, press <0> to switch to
C
the single-image display.
186
k Playing Movies
Y
the movie.
P
4 Last frame Displays the movie’s last frame.
O
X Edit Displays the editing screen (p.188).
C
Playback position
mm’ ss” Playback time (minutes:seconds)
You can adjust the built-in speaker’s (p.186) sound
9 Volume volume by turning the <6> dial.
187
X Editing a Movie’s First and Last Scenes
You can edit out the first and last scenes of a movie in 1-sec. increments.
Y
what will remain.
3 Check
P
the edited movie.
O
Select [7] and press <0> to playback
the portion highlighted in blue.
188
3 Slide Show (Auto Playback)
You can playback the images in the card as an automatic slide show.
PY
Press the <V> key to select one of
the following: [iDate/nFolder/
O
Rating].
C
When <zH> is highlighted,
press the <B> button.
Press the <V> key to select the
desired option, then press <0>.
189
3 Slide Show (Auto Playback)
3 SetPress
[Set up] as desired.
the <V> key to select [Set
up], then press <0>.
Set the [Display time] (still photos),
[Repeat], and [Transition effect].
Then press the <M> button.
4 StartPress
Y
the slide show.
P
the <V> key to select [Start],
then press <0>.
C O
X After [Loading image...] is displayed,
the slide show will start.
To pause the slide show, press <0>. During pause, [G] will be
displayed on the upper left of the image. Press <0> again to resume
the slide show.
During auto playback, you can press the <B> button to change the
still photo display format (p.70).
During movie playback, you can adjust the sound volume by turning the
<6> dial.
During pause, you can press the <U> key to view another image.
During the slide show, auto power off will not take effect.
The display time may vary depending on the image.
To view the slide show on a TV set, see pages 191-193.
190
Playback on a High-Definition TV
An HDMI cable (sold separately) is necessary to connect the
camera to a TV set. The TV set must also have an HDMI terminal.
When the camera is connected to a TV set with an HDMI cable, you can
playback movies and still photos on the TV set. If you use a High-
Definition TV set to playback High-Definition (HD) movies shot with this
camera, you can watch the movies in high definition.
Y
2 Connect the HDMI cable to the TV
P
set.
O
Connect the HDMI cable to the TV’s
HDMI IN port.
4 Set
<1>.
the camera’s power switch to
Adjust the movie’s sound volume with the TV set. The sound volume
cannot be adjusted with the camera.
Before connecting or disconnecting the cable between the camera and
television, turn off the camera and TV set.
Depending on the TV set, part of the image displayed might be cut off.
191
Playback on a High-Definition TV
C
with HDMI CEC*, you can use the TV set’s remote control for playback
operations.
* An HDMI-standard function enabling HDMI devices to control each other so that
you can control them with one remote control unit.
O
: Play movie button. For a slide show, press the
C
: Slide show remote control’s / button to select
: Disp. shooting info an option, then press the Enter
: Rotate button.
If you select [Return] and press the
Enter button, the menu will disappear
and you can use the / button to
select an image.
Some TV sets require you to first enable the HDMI CEC connection. For
details, see the TV set’s instruction manual.
Certain TV sets, even those compatible with HDMI CEC, may not
operate properly. In such a case, disconnect the HDMI cable, set [4
Ctrl over HDMI] to [Disable], and use the camera to control the
playback operation.
193
K Protecting Images
Protecting an image prevents it from being erased accidentally.
PY
Image protect icon
C O
3 Protect the image.
Press the <U> key to select the
image to be protected, then press
<0>.
X When an image is protected, the
<K> icon will appear on the top of
the screen.
To cancel the image protection, press
<0> again. The <K> icon will
disappear.
To protect another image, repeat step
3.
To exit the image protection, press
the <M> button. The menu will
reappear.
194
K Protecting Images
PY
C O
If you format the card (p.44), the protected images will also be erased.
Y
bottom of the screen.
3 Erase
O P
the image.
Select [Erase], then press <0>. The
C
image displayed will be erased.
196
L Erasing Images
Y
on the upper left.
P
To select other images to be erased,
repeat step 3.
197
B Shooting Information Display
Sample Image Taken in a Creative Zone Mode
Y
Image-recording Color space
quality Shooting date and
Playback number/
O P time
White balance correction
C
Total images recorded
198
B Shooting Information Display
* For images taken in Basic Zone modes, the information displayed may differ
depending on the shooting mode.
* Photos taken in the <C> mode will show [Background blur].
PY
Shooting time
Movie/Playback
C O
Movie shooting
mode
Recording Movie file size
system
199
B Shooting Information Display
PY
how many pixels exist for each brightness level. The
more pixels there are toward the left, the darker the
O
image. And the more pixels there are toward the right, Normal brightness
C
the brighter the image. If there are too many pixels on
the left, the shadow detail will be lost. And if there are
too many pixels on the right, the highlight detail will be
lost. The gradation in-between will be reproduced. By Bright image
Printing (p.202)
PY
O
You can connect the camera directly to a printer and print
out the images in the card. The camera is compatible with
C
“wPictBridge” which is the standard for direct printing.
Digital Print Order Format (DPOF) (p.211)
DPOF (Digital Print Order Format) enables you to print
images recorded in the card according to your printing
instructions such as the image selection, quantity to print,
etc. You can print multiple images in one batch or give the
print order to a photofinisher.
201
Preparing to Print
The direct printing procedure is done entirely with the camera
while you look at the LCD monitor.
2 SetForupdetails,
the printer.
see the printer’s
instruction manual.
Y
3 Connecting the camera to the
P
printer.
O
Use the interface cable provided with
the camera.
202
Preparing to Print
wPictBridge
6 Playback the image.
Press the <x> button.
X The image will appear, and the <w>
icon will appear on the upper left to
indicate that the camera is connected
to a printer.
PY
C O
Movies cannot be printed.
The camera cannot be used with printers compatible only with CP Direct
or Bubble Jet Direct.
Do not use any interface cable other than the one provided.
If there is a long beeping sound in step 5, it indicates a problem with the
printer. Resolve the problem displayed by the error message (p.210).
You can also print RAW images taken with this camera.
If you use a battery pack to power the camera, make sure it is fully
charged. With a fully-charged battery, printing up to about 4 hr. 30 min. is
possible.
Before disconnecting the cable, first turn off the camera and printer. Hold
the plug (not the cord) to pull out the cable.
For direct printing, using AC Adapter Kit ACK-E10 (sold separately) to
power the camera is recommended.
203
wPrinting
The screen display and setting options will differ depending on the
printer. Some settings might not be available. For details, see the
printer’s instruction manual.
Printer-connected icon Select the image to be printed.
1 Check that the <w> icon is
displayed on the upper left of the LCD
monitor.
Press the <U> key to select the
image to be printed.
2 Press <0>.
X The print setting screen will appear.
Y
Print setting screen Sets the printing effects (p.206).
P
Sets the date or file number imprinting to on
or off.
O
Sets the quantity to be printed.
C
Sets the trimming (cropping) (p.209).
Sets the paper size, type, and layout.
Returns to the screen in step 1.
Starts the printing.
The paper size, type, and layout you have set are displayed.
* Depending on the printer, certain settings such as the date and file
number imprinting and trimming might not be selectable.
204
wPrinting
PY
O
Select the page layout, then press
<0>.
Bordered
C X The print setting screen will reappear.
205
wPrinting
4 SetSettheasprinting effects.
necessary. If you need not set
any printing effects, go to step 5.
What is displayed on the screen
differs depending on the printer.
Select the option on the upper right
(circled in the screenshot), then press
<0>.
Select the desired printing effect, then
press <0>.
If the <e> icon is displayed brightly
next to <z>, you can also adjust
the printing effect (p.208).
Y
Printing Effect Description
P
The image will be printed according to the printer’s standard
O
EOn colors. The image’s Exif data is used to make automatic
corrections.
C
EOff No automatic correction will be applied.
The image will be printed with higher saturation to produce
EVIVID
more vivid blues and greens.
ENR Image noise is reduced before printing.
0 B/W Prints in black-and-white with true blacks.
0 Cool tone Prints in black-and-white with cool, bluish blacks.
0 Warm tone Prints in black-and-white with warm, yellowish blacks.
Prints the image in the actual colors and contrast. No
zNatural
automatic color adjustments are applied.
The printing characteristics are the same as the “Natural”
zNatural M setting. However, this setting enables finer printing
adjustments than with “Natural.”
The printing will differ depending on the printer. For details,
EDefault
see the printer’s instruction manual.
* When you change the printing effects, it is reflected in the image displayed on
the upper left. Note that the printed image might look slightly different from the
displayed image which is only an approximation. This also applies to
[Brightness] and [Adjust levels] on page 208.
206
wPrinting
6 SetSettheasnumber of copies.
necessary.
Select <R>, then press <0>.
Set the number of copies, then press
<0>.
PY
7 StartSelect
printing.
[Print], then press <0>.
C O
With Easy printing, you can print another image using the same settings.
Just select the image and press the <l> button. With Easy printing, the
number of copies will always be 1. (You cannot set the number of
copies.) Also, any trimming (p.209) will not be applied.
The [Default] setting for printing effects and other options are the
printer’s own default settings as set by the printer’s manufacturer. See
the printer’s instruction manual to find out what the [Default] settings are.
Depending on the image’s file size and image-recording quality, it may
take some time for the printing to start after you select [Print].
If image tilt correction (p.209) has been applied, it may take longer to
print the image.
To stop the printing, press <0> while [Stop] is displayed, then select [OK].
If you execute [Clear all camera settings] (p.164), all the settings will
revert to the default.
207
wPrinting
Brightness
The image brightness can be adjusted.
Adjust levels
When you select [Manual], you can change
PY
the histogram’s distribution and adjust the
O
With the Adjust levels screen displayed, press
C
the <B> button to change the position of
the <h>. Press the <U> key to freely adjust
the shadow level (0 - 127) or highlight level
(128 - 255).
kBrightener
Effective in backlit conditions which can make the subject’s face look
dark. When [On] is set, the face will be brightened for printing.
Red-eye corr.
Effective in flash images where the subject has red eye. When [On]
is set, the red eye will be corrected for printing.
The [kBrightener] and [Red-eye corr.] effects will not show on the screen.
When you select [Detail set.], you can adjust the [Contrast],
[Saturation], [Color tone], and [Color balance]. To adjust the [Color
balance], use the <S> keys. B is for blue, A is amber, M is magenta,
and G is green. The color in the respective direction will be corrected.
If you select [Clear all], all the printing effect settings will be reverted to
the default.
208
wPrinting
Y
The image area within the trimming frame will be printed. The
P
trimming frame’s aspect ratio can be changed with [Paper settings].
O
Changing the trimming frame size
When you press the <u> or <I> button, the size of the
C
trimming frame will change. The smaller the trimming frame, the
larger the image magnification will be for printing.
Moving the trimming frame
Press the <S> key to move the frame over the image vertically or
horizontally. Move the trimming frame until it covers the desired image area.
Rotating the frame
Pressing the <B> button will toggle the trimming frame
between the vertical and horizontal orientations. This enables you
to create a vertical-oriented print from a horizontal image.
Image tilt correction
By turning the <6> dial, you can adjust the image tilt angle up to
±10 degrees in 0.5-degree increments. When you adjust the
image tilt, the <O> icon on the screen will turn blue.
3 Press <0> to exit the trimming.
X The print setting screen will reappear.
You can check the trimmed image area on the upper left of the
print setting screen.
209
wPrinting
Depending on the printer, the trimmed image area might not be printed
as you specified.
The smaller you make the trimming frame, the grainier the picture will
look in the print.
While trimming the image, look at the camera’s LCD monitor. If you look
at the image on a TV screen, the trimming frame might not be displayed
accurately.
Error Messages
Y
If a problem occurs during printing, an error message will appear on the
camera’s LCD monitor. Press <0> to stop printing. After fixing the
O P
problem, resume printing. For details on how to fix a printing problem, refer
C
Paper Error
Check whether the paper is properly loaded in the printer.
Ink Error
Check the printer’s ink level, and check the waste ink tank.
Hardware Error
Check for any printer problems other than paper and ink problems.
File Error
The selected image cannot be printed via PictBridge. Images taken with a
different camera or images edited with a computer might not be printable.
210
W Digital Print Order Format (DPOF)
You can set the print type, date imprinting, and file No. imprinting. The
print settings will be applied to all print-ordered images. (They cannot
be set individually for each image.)
Y
Select [Set up], then press <0>.
O P
C3 Set the option as desired.
Set the [Print type], [Date], and [File
No.].
Select the option to be set, then press
<0>. Select the desired setting,
then press <0>.
[Print type] [Date] [File No.]
211
W Digital Print Order Format (DPOF)
PY
[All image] to order the images to be
printed.
C O
Even if [Date] and [File No.] are set to [On], the date or file No. might not
be imprinted depending on the print type setting and printer model.
When printing with DPOF, you must use the card whose print order
specifications have been set. It will not work if you just extract images
from the card and try to print them.
Certain DPOF-compatible printers and photofinishers might not be able
to print the images as you specified. If this happens with your printer,
refer to the printer’s instruction manual. Or check with your photofinisher
about compatibility when ordering prints.
Do not insert into the camera a card whose print order was set by a
different camera and then try to specify a print order. The print order may
not work or may be overwritten. Also, depending on the image type, the
print order may not be possible.
RAW images and movies cannot be print ordered. You can print RAW
images through direct printing (p.202).
With [Index] prints, both the [Date] and [File No.] cannot be set to [On]
at the same time.
212
W Digital Print Order Format (DPOF)
Print Ordering
Sel.Image
Select and order images one by one.
To display the three-image display, press
the <I> button. To return to the
single-image display, press the <u>
button.
After completing the print order, press
the <M> button to save the print
order to the card.
[Standard] [Both]
Press the <V> key to set the number of
Quantity copies to be printed for the displayed
Y
Total images selected image.
O P
[Index]
Press the <V> key to checkmark the
C
Check mark box <X> and the image will be included
Index icon in the index print.
Byn
Select [Mark all in folder] and select the folder. A print order for one
copy of all the images in the folder will be placed. If you select [Clear
all in folder] and select the folder, the print order for that folder will
all be canceled.
All image
If you select [Mark all on card], one copy of all the images in the
card will be set for printing. If you select [Clear all on card], the print
order will be cleared for all the images in the card.
Note that RAW images and movies will not be included in the print order
even if you set “Byn” or “All image.”
When using a PictBridge printer, print no more than 400 images for one
print order. If you specify more than this, all the images might not be
printed.
213
W Direct Printing with DPOF
With a PictBridge printer, you can easily
print images with DPOF.
1 Prepare to print.
See page 202. Follow the “Connecting the Camera to a Printer”
procedure up to step 5.
2 Under the [3] tab, select [Print order].
3 Select [Print].
Y
[Print] will be displayed only if the camera is connected to a
printer and printing is possible.
4 Set the [Paper settings] (p.204).
O P
Set the printing effects (p.206) if necessary.
5 Select [OK].
C
Before printing, be sure to set the paper size.
Certain printers cannot imprint the file No.
If [Bordered] is set, certain printers might imprint the date on the border.
Depending on the printer, the date might look light if it is imprinted on a
bright background or on the border.
214
Customizing the
Camera
PY
You can customize various camera features to suit your
picture-taking preferences with Custom Functions.
Zone modes.
C O
Custom Functions can be set and used only in Creative
ne
Zo
e
iv
at
Cre
215
3 Setting Custom FunctionsN
Select [Custom Functions (C.Fn)].
1 Under the [7] tab, select [Custom
Functions (C.Fn)], then press <0>.
C O
Press the <V> key to select the
setting (number), then press <0>.
Repeat steps 2 and 3 if you want to
set other Custom Functions.
At the bottom of the screen, the
current Custom Function settings are
indicated below the respective
function numbers.
4 ExitPress
the setting.
the <M> button.
X The screen for step 1 will reappear.
216
3 Setting Custom FunctionsN
Custom Functions
O
* If you use an EX-series Speedlite (sold separately) equipped with a LED
light, the LED light will turn on for AF-assist even in the d and c
C
modes.
The shaded Custom Functions do not take effect during Live View (LV)
shooting. (Settings are disabled.)
217
3 Custom Function SettingsN
Custom Functions are organized into four groups based on the function
type: C.Fn I: Exposure, C.Fn II: Image, C.Fn III: Autofocus/Drive, C.Fn
IV: Operation/Others.
C.Fn I: Exposure
Y
the LCD monitor as shown below.
O P
C
C.Fn-2 Flash sync. speed in Av mode
When you use flash in the aperture-priority AE mode (f), you can set the
flash sync speed.
0: Auto
The flash sync speed is set automatically within a range of 1/200 sec. to
30 sec. to suit the scene’s brightness. With an external Speedlite, high-
speed sync will also be possible.
1: 1/200-1/60 sec. auto
Prevents a slow shutter speed from being set in low-light conditions. It is
effective for preventing subject blur and camera shake. However, while
the subject will be properly exposed with the flash, the background may
come out dark.
2: 1/200 sec. (fixed)
The flash-sync speed is fixed to 1/200 sec. This more effectively
prevents subject blur and camera shake than with setting 1. However,
the background may come out darker than with setting 1.
218
3 Custom Function SettingsN
With settings 1 and 2, the continuous shooting speed will be slower even
with shutter speeds faster than 1 sec. (with the image-recording quality
Y
set to JPEG). The maximum burst during continuous shooting will also
P
decrease (with the image-recording quality set to JPEG). Settings 1 and
2 are recommended only when shooting long exposures.
O
With settings 1 and 2, after the picture is taken, the noise reduction
C
process may take the same amount of time as the exposure. You cannot
take another picture until the noise reduction process is completed.
At ISO 1600 and higher, noise might be more pronounced with setting 2
than with setting 0 or 1.
With setting 1 or 2, if a long exposure is shot with the Live View image
displayed, “BUSY” will be displayed during the noise reduction process.
The Live View display will not appear until the noise reduction is
completed. (You cannot take another picture.)
219
3 Custom Function SettingsN
With setting 2, the continuous shooting speed will be slower (with the
image-recording quality set to JPEG or 1+73). The maximum burst
during continuous shooting will also decrease (with the image-recording
quality set to JPEG or 1).
If you playback a 1 or 1+73 image with the camera or print an
image directly, the effect of the high ISO speed noise reduction may look
minimal. You can check the noise reduction effect or print noise-reduced
images with Digital Photo Professional (provided software, p.270).
Y
and highlights becomes smoother.
P
With setting 1, the Auto Lighting Optimizer (p.107) is automatically set to
O
[Disable] and the setting cannot be changed.
With setting 1, noise may become slightly more pronounced than with
C
setting 0.
220
3 Custom Function SettingsN
Y
C.Fn IV: Operation/Others
C.Fn-7
0: AF/AE lock P
Shutter/AE lock button
O
1: AE lock/AF
C
Convenient when you want to focus and meter separately. Press the
<A> button to autofocus, and press the shutter button halfway to apply
AE lock.
2: AF/AF lock, no AE lock
In the AI Servo AF mode, you can press the <A> button to stop the AF
operation momentarily. This prevents the AF from being thrown off by
any obstacle passing between the camera and subject. The exposure is
set at the moment the picture is taken.
3: AE/AF, no AE lock
This is useful for subjects which keep moving and stopping repeatedly.
In the AI Servo AF mode, you can press the <A> button to start or stop
the AI Servo AF operation. The exposure is set at the moment the
picture is taken. Thus, the optimum focusing and exposure will always
be achieved as you wait for the decisive moment.
221
3 Custom Function SettingsN
Y
Press <0> to display the menu screen.
5: Depth-of-field preview
O P
The lens will stop down to the aperture that was set, and you can see
the depth of field (range of acceptable focus) in the viewfinder or in the
Live View image.
C.Fn-9
C
Flash button function
0: Raise built-in flash
1: ISO speed
The ISO speed setting screen will appear. Press the <U> key or turn
the <6> dial to change the ISO speed. You can also refer to the
viewfinder to set the ISO speed.
222
3 Custom Function SettingsN
PY
C O
223
3 Registering My MenuN
Under the My Menu tab, you can register up to six menu options and
Custom Functions whose settings you change frequently.
PY
On the confirmation dialog, select
[OK] and press <0> to register the
O
item.
C
You can register up to six items.
To return to the screen in step 2,
press the <M> button.
224
Reference
PY
This chapter provides reference information for camera
features, system accessories, etc.
C O
225
External Speedlites
EOS-dedicated, EX-series Speedlites
Basically operates like a built-in flash for easy operation.
When an EX-series Speedlite (sold separately) is attached to the
camera, almost all the autoflash control is done by the camera. In other
words, it is like a high-output flash attached externally in place of the
built-in flash.
For detailed instructions, see the EX-series Speedlite’s instruction
manual. This camera is a Type-A camera that can use all the features
of EX-series Speedlites.
PY
Shoe-mount Speedlites
C O Macro Lites
226
External Speedlites
Y
1/200 sec. or slower shutter speeds. Use a sync speed slower than
P
1/200 sec.
Be sure to test the flash unit beforehand to make sure it synchronizes
properly with the camera.
C O
227
Using a Household Power Outlet
With the AC Adapter Kit ACK-E10 (sold separately), you can connect
the camera to a household power outlet and not worry about the
remaining battery level.
3 Insert
PY
the DC Coupler.
O
Open the card/battery compartment
C
cover and insert the DC Coupler until
it locks in place.
Do not connect or disconnect the power cord while the camera’s power
switch is set to <1>.
228
F Using the Remote Switch
Remote Switch RS-60E3 (sold separately) comes with an approx.
60cm/2.0ft cord. When connected to the camera’s remote control
terminal, Remote Switch RS-60E3 can be used to press the shutter
button halfway and completely.
Remote Controller RC-6, RC-1, and RC-5 (all sold separately) cannot be
used with the camera.
Y
Using the Eyepiece Cover
O P
When you use the self-timer, bulb, or Remote Switch and do not look
through the viewfinder, stray light entering the viewfinder can cause the
C
image to look dark. To prevent this, use the eyepiece cover (p.25)
attached to the camera strap.
During Live View shooting and movie shooting, attaching the
eyepiece cover is unnecessary.
Y
1 Insert an Eye-Fi card. (p.28)
P
2 Select
C O
[Eye-Fi settings].
Under the [5] tab, select [Eye-Fi
settings], then press <0>.
This menu is displayed only when an
Eye-Fi card has been inserted into
the camera.
Y
display (p.198).
Transmission status icon
O P
H (Gray) Not connected : No connection with access point.
H (Blinking) Connecting : Connecting with access point.
H ( ) Transferring
C
H (Displayed) Connected : Connection to access point established.
: Image transfer to access point in
progress.
231
Function Availability Table According to Shooting Modes
o: Set automatically k: User selectable : Not selectable
Basic Zone Creative Zone
Mode Dial k*1
1 7 C 2 3 4 5 6 d sf a 8
All recording quality
settings selectable k k k k k k k k k k k k k
Auto / ISO Auto o o o o o o o o k k k k k o
ISO
Manual k k k k k
speed
Settable maximum
ISO speed limit k k k k k
Automatic setting P P P Q R P P P
Picture
Style Manual selection k k k k k k
Shoot by ambience selection k k k k k k
Shoot by lighting or scene type k k k k
Auto o o o o o o o o k k k k k k
Y
White
Preset k k k k k k
P
balance Custom k k k k k k
O
Correction /
Bracketing k k k k k
C
Auto Lighting Optimizer o o o o o o o o k k k k k k
Lens peripheral illumination
correction k k k k k k k k k k k k k k
Long exposure noise
reduction k k k k k
High ISO speed noise reduction o o o o o o o o k k k k k
Highlight tone priority k k k k k k
Color
sRGB o o o o o o o o k k k k k
space Adobe RGB k k k k k
One-Shot AF o o o o k k k k k d
AI Servo AF o k k k k k c
f*2
AI Focus AF o o o k k k k k
Focusing
AF point selection o o o o o o o o k k k k k f
AF-assist beam o o o o *3 o k k k k k
Manual (MF) k k k k k k k k k k k k k k
232
Function Availability Table According to Shooting Modes
Metering Evaluative o o o o o o o o k k k k k
mode Metering mode
k k k k k
selection
Program shift k
Exposure
compensation k k k k k
Exposure AEB k k k k k
AE lock k k k k k
Depth-of-field
preview k (C.Fn-8-5)
Single shooting k k k k k k k k k k k
Continuous shooting k k k k k k k k
Y
Drive j (10 sec.) k k k k k k k k k k k k k
P
l (2 sec.) k k k k k
O
q (Continuous) k k k k k k k k k k k k k
C
Fires automatically o k o o o
Flash on k k k k k k
Built-in Flash off o k o o k k k k k o
flash
Red-eye reduction k k k k k k k k k k
FE lock k k k k k
Flash exposure
compensation k k k k k
233
3 Menu Settings
For Viewfinder Shooting and Live View Shooting
Y
C.Fn setting / Clear external flash C.Fn setting
2 Shooting 2 (Red)
Exposure
O P
1/3-stop or 1/2-stop increments, ±5 stops
103
C
compensation/AEB (AEB: ±2 stops)
Auto Lighting
Disable / Low / Standard / Strong 107
Optimizer
Evaluative metering / Partial metering /
Metering mode 100
Center-weighted average metering
Custom White Balance Manual setting of white balance 115
WB correction: White balance correction 117
WB Shift/BKT
BKT setting: White balance bracketing 118
Color space sRGB / Adobe RGB 119
PStandard / QPortrait / RLandscape / 79
Picture Style SNeutral / UFaithful / VMonochrome / 110
WUser Def. 1, 2, 3 113
The [2] Shooting 2, [y] Shooting 3, [7] Set-up 3, and [9] My Menu
screens (tabs) are not displayed in Basic Zone modes.
The [z] Shooting 4 tab is displayed in Basic Zone modes as the [2]
Shooting 2 tab.
Shaded menu options are not displayed in Basic Zone modes.
234
3 Menu Settings
z Shooting 4 (Red)
Live View shooting Enable / Disable 123
AF mode Live mode / u Live mode / Quick mode 128
Grid display Off / Grid 1l / Grid 2m 127
4 sec. / 16 sec. / 30 sec. / 1 min. / 10 min. /
Metering timer 127
30 min.
3 Playback 1 (Blue)
Select images / All images in folder / Unprotect
Protect images all images in folder / All images on card / 194
Rotate
Y
Unprotect all images on card
P
Rotate vertical images 179
O
Select and erase images / All images in folder /
Erase images 196
All images on card
Print order
4 Playback 2 (Blue)
Histogram
C
Specify images to be printed (DPOF)
Brightness / RGB
211
200
1 image / 10 images / 100 images / Date /
Image jump w/6 177
Folder / Movies / Stills / Rating
Playback description / Display time / Repeat /
Slide show 189
Transition effect
Rating [OFF] / l / m / n / o / p 180
Control over HDMI Disable / Enable 192
235
3 Menu Settings
6 Set-up 2 (Yellow)
LCD brightness Seven brightness levels provided 155
Y
LCD off/on button Shutter btn. / Shutter/DISP / Remains on 166
P
Set the date (year, month, day) and time (hour,
Date/Time 33
O
min., sec.)
LanguageK Select the interface language 34
Clean manually
Feature guide
7 Set-up 3 (Yellow)
C
Clean image sensor manually
Enable / Disable
173
47
Custom Functions
Customize camera functions as desired 216
(C.Fn)
Display copyright information / Enter author’s
Copyright information name / Enter copyright details / Delete 160
copyright information
Clear all camera settings / Clear all Custom
Clear settings 164
Func. (C.Fn)
Firmware Ver. For updating the firmware -
9 My Menu (Green)
Register frequently-used menu items and
My Menu settings 224
Custom Functions
236
3 Menu Settings
x Movie 2 (Red)
Movie recording size 1280x720 6 / 1280x720 5 147
Sound recording On / Off
PY
4 sec. / 16 sec. / 30 sec. / 1 min. / 10 min. /
148
O
Metering timer 148
30 min.
Grid display
y Movie 3 (Red)
Exposure
C
Off / Grid 1l / Grid 2m
149
compensation
Auto Lighting
Disable / Low / Standard / Strong 149
Optimizer
Custom White Balance Manual setting of white balance 149
PStandard / QPortrait / RLandscape /
Picture Style SNeutral / UFaithful / VMonochrome / 149
WUser Def. 1, 2, 3
237
3 Menu Settings
3 Playback 1 (Blue)
Select images / All images in folder / Unprotect
Protect images all images in folder / All images on card / 194
Unprotect all images on card
Rotate Rotate vertical images 179
Select and erase images / All images in folder
Erase images 196
/ All images on card
Print order Specify images to be printed (DPOF) 211
4 Playback 2 (Blue)
Histogram
PY
Brightness / RGB 200
Slide show
C O
1 image / 10 images / 100 images / Date /
Folder / Movies / Stills / Rating
Playback description / Display time / Repeat /
Transition effect
177
189
238
3 Menu Settings
6 Set-up 2 (Yellow)
Y
LCD brightness Seven brightness levels provided 155
P
Set the date (year, month, day) and time (hour,
Date/Time 33
min., sec.)
LanguageK
Feature guide
C O
Select the interface language
Enable / Disable
34
47
The menu tabs and options displayed will differ for viewfinder shooting,
Live View shooting, and movie shooting.
The [w] Movie 1, [x] Movie 2, and [y] Movie 3 screens (tabs) are
displayed only in the movie shooting mode.
239
System Map
ST-E2 270EX II 320EX 430EX II 580EX II Macro Ring Lite Macro Twin Lite
MR-14EX MT-24EX
Bundled
Eyepiece Extender Accessories
EP-EX15ll
Eyecup Ef
Rubber Frame Ef
PY
E-series Dioptric
Adjustment Lenses
Wide Strap
EW-200D
C O
Angle Finder C
AC Adapter Kit
ACK-E10
Compact Power
Semi Hard Case Adapter
EH19-L CA-PS700
240
System Map
Remote Switch
RS-60E3
HDMI Cable
Y
HTC-100 (2.9 m/9.5 ft.)
O P TV/Video
C
Camera Instruction EOS DIGITAL Software Instruction
Manual Solution Disk Manual
PictBridge-compatible printer
Interface Cable
(1.3 m/4.3 ft.)
Power-Related Problems
PY
remove the battery pack. Attach the battery pack to the charger again and
wait a while before connecting the charger to a power outlet again.
C O
The camera does not operate even when the power switch is set to <1>.
Make sure the card/battery compartment cover is closed (p.28).
The battery is not properly installed in the camera (p.28).
Recharge the battery (p.26).
Press the <B> button (p.46).
The access lamp still blinks even when the power switch is set to <2>.
If the power is turned off while an image is being recorded to the card,
the access lamp will still continue to light/blink for a few seconds.
When the image recording is completed, the power will turn off
automatically.
242
Troubleshooting Guide
If you use Live View shooting or shoot movies for a prolonged period
(p.121, 139), the number of possible shots will decrease.
If you hold down the shutter button for a long time or often use only the
AF without taking pictures, the number of possible shots will decrease.
If you often use the LCD monitor, the number of possible shots will
decrease.
If you use the lens Image Stabilizer, the number of possible shots will
decrease.
Y
button to turn on the LCD monitor.
P
Shooting-Related Problems
C O
No images can be shot nor recorded.
The card is not properly inserted (p.28).
If the card is full, replace the card or delete unnecessary images to
make room (p.28, 196).
If you try to focus in the One-Shot AF mode while the focus
confirmation light <o> in the viewfinder blinks, a picture cannot be
taken. Press the shutter button halfway again to focus, or focus
manually (p.39, 85).
Slide the card’s write-protect switch to the Write/Erase setting (p.28).
243
Troubleshooting Guide
PY
Horizontal stripes or irregular exposures can be caused by fluorescent
light, LED bulbs, or other artificial lighting during viewfinder or Live
C O
View shooting. Also, the exposure or color tone might not come out
right. A slow shutter speed may solve the problem.
When I use the <f> mode with flash, the shutter speed becomes slow.
If you shoot at night when the background is dark, the shutter speed
becomes slow automatically (slow-sync shooting) so that both the
subject and background are properly exposed. If you do not want a
slow shutter speed to be set, set [2: Flash sync. speed in Av mode]
in [7 Custom Functions (C.Fn)] to 1 or 2 (p.218).
PY
The built-in flash pops up by itself.
In the 1, 2, 4, and 6 modes, the built-in flash will pop-up
C
The built-in flash does not fire.O
automatically when flash is necessary.
If you shoot continuously with the built-in flash at short intervals, the
flash might stop operating to protect the flash unit.
245
Troubleshooting Guide
The shutter makes two shooting sounds during Live View shooting.
If you use flash, the shutter will make two sounds each time you shoot
(p.123).
During Live View shooting and movie shooting, the E icon appears.
Y
It indicates that the camera’s internal temperature is high. If the <s>
P
icon is white, the still photo’s image quality might deteriorate. If the
O
<E> icon is red, it indicates that the Live View or movie shooting will
soon be terminated automatically (p.136, 150).
C
Movie shooting terminates by itself.
If the card’s writing speed is slow, movie shooting may stop
automatically. Use an SD Speed Class 6 “ ” or faster card. To
find out the card’s read/write speed, see the card manufacturer’s Web
site, etc.
If a movie clip’s file size reaches 4 GB or the shooting length reaches
29 min. 59 sec., the movie shooting will stop automatically.
246
Troubleshooting Guide
Playback Problems
Y
If the image has been protected, it cannot be erased (p.194).
O P
C
Movies edited with a personal computer using the provided
ZoomBrowser EX/ImageBrowser (p.270) or other software cannot be
played with the camera.
247
Troubleshooting Guide
PY
My card reader does not recognize the card.
Depending on the card reader and computer OS used, SDXC cards
O
might not be correctly recognized. In such a case, connect your
C
camera to the computer with the provided interface cable, then
transfer the images to your computer using EOS Utility (provided
software, p.270).
Display Problems
248
Troubleshooting Guide
[###] is displayed.
PY
O
If the card has recorded a number of images greater than the camera
can display, [###] will be displayed (p.181).
C
[Eye-Fi settings] does not appear.
[Eye-Fi settings] will appear only when an Eye-Fi card is inserted into
the camera. If the Eye-Fi card has a write-protect tab set to the LOCK
position, you will not be able to check the card’s connection status or
disable Eye-Fi card transmission (p.230).
Printing-Related Problems
249
Error Codes
Error No. If there is a problem with the camera, an
error message will appear. Follow the on-
screen instructions.
Countermeasures
Y
Î Clean the electrical contacts on the camera and lens and use a
P
Canon lens (p.15, 18).
O
Card cannot be accessed. Reinsert/change card or format card
with camera.
C
02
Î Remove and insert the card again, replace the card, or format the
card (p.28, 44).
Cannot save images because card is full. Replace card.
04 Î Replace the card, erase unnecessary images, or format the card
(p.28, 196, 44).
The built-in flash could not be raised. Turn the camera off and on
05 again.
Î Operate the power switch (p.31).
10, 20, Shooting is not possible due to an error. Turn the camera off and
30, 40, on again or re-install the battery.
50, 60, Î Operate the power switch, remove and install the battery pack
70, 80 again, or use a Canon lens (p.31, 28).
* If the error still persists, write down the error No. and contact your nearest
Canon Service Center.
250
Specifications
• Type
Type: Digital, single-lens reflex, AF/AE camera with built-in flash
Recording media: SD memory card, SDHC memory card, SDXC memory
card
Image sensor size: Approx. 22.0 x 14.7mm
Compatible lenses: Canon EF lenses (including EF-S lenses)
(35mm-equivalent focal length is approx. 1.6 times the
lens focal length)
Lens mount: Canon EF mount
• Image Sensor
Type: CMOS sensor
Effective pixels: Approx. 12.20 megapixels
Aspect ratio: 3:2
Dust delete function: Manual, Dust Delete Data appended
• Recording system
Y
Recording format: Design rule for Camera File System 2.0
P
Image type: JPEG, RAW (14-bit Canon original)
RAW+JPEG Large simultaneous recording possible
Recorded pixels: L (Large)
251
Specifications
Automatic image
brightness correction: Auto Lighting Optimizer
Highlight tone priority: Provided
Lens peripheral
illumination correction: Provided
• Viewfinder
Type: Eye-level pentamirror
Coverage: Vertical/Horizontal approx. 95% (with Eye point approx. 21 mm)
Magnification: Approx. 0.8x (-1 m-1 with 50mm lens at infinity)
Eye point: Approx. 21 mm (From eyepiece lens center at -1 m-1)
Built-in dioptric adjustment: Approx. -2.5 - +0.5 m-1 (dpt)
Focusing screen: Fixed, Precision Matte
Mirror: Quick-return type
Depth-of-field preview: Enabled with Custom Function setting
• Autofocus
Y
Type: TTL secondary image-registration, phase detection
P
AF points: 9 AF points
Metering range: EV 0 - 18 (at 23°C/73°F, ISO 100)
O
Focus modes: One-Shot AF, AI Servo AF, AI Focus AF, Manual focusing (MF)
C
AF-assist beam: Small series of flashes fired by built-in flash
• Exposure Control
Metering modes: 63-zone TTL full-aperture metering
• Evaluative metering (linked to all AF points)
• Partial metering (approx. 10% of viewfinder at center)
• Center-weighted average metering
Metering range: EV 1 - 20 (at 23°C/73°F with EF50mm f/1.4 USM lens,
ISO 100)
Exposure control: Program AE (Full Auto, Flash Off, Creative Auto, Portrait,
Landscape, Close-up, Sports, Night Portrait, Program),
shutter-priority AE, aperture-priority AE, manual
exposure, automatic depth-of-field AE
ISO speed: Basic Zone modes: ISO 100 - 3200 set automatically
(Recommended Creative Zone modes: Set manually within ISO 100 - 6400
exposure index) (whole-stop increments), set automatically within ISO
100 - 6400, maximum ISO speed settable with ISO Auto
Exposure compensation: Manual: ±5 stops in 1/3- or 1/2-stop increments
AEB: ±2 stops in 1/3- or 1/2-stop increments (Can be
combined with manual exposure compensation)
252
Specifications
Y
External flash: EX-series Speedlite (Flash functions settable with the camera)
P
Flash metering: E-TTL II autoflash
Flash exposure
O
compensation: ±2 stops in 1/3- or 1/2-stop increments
C
FE lock: Provided
PC terminal: None
• Drive System
Drive mode: Single shooting, continuous shooting, self-timer with 10-sec. or
2-sec. delay and 10-sec. delay with continuous shooting
Continuous shooting speed: JPEG: Max. approx. 3.0 fps
RAW: Max. approx. 2.0 fps
RAW+JPEG Large/Fine: Approx. 0.8 fps (averaged value)
* With RAW+JPEG Large/Fine, the continuous shooting
speed will be slower after the third shot.
* Based on Canon’s standard 4GB card
Max. burst: JPEG Large/Fine: Approx. 830 shots
RAW: Approx. 5 shots
RAW+JPEG Large/Fine: Approx. 1 shot
* With RAW+JPEG Large/Fine, “busy” will be displayed.
Continuous shooting at approx. 0.8 fps (averaged
value) is possible.
* Based on Canon’s standard 4GB card and Canon’s testing
conditions (with ISO 100 and Standard Picture Style).
253
Specifications
Y
File size: Approx. 222.6 MB/min.
Focusing: Same as focusing with Live View shooting
Metering modes:
O
the image sensor
P
Center-weighted average and evaluative metering with
Exposure control:
ISO speed:
C
EV 0 - 20 (at 23°C/73°F with EF50mm f/1.4 USM lens,
ISO 100)
Program AE for movie shooting
Automatically set within ISO 100 - 6400
Exposure compensation: ±3 stops in 1/3-stop increments
AE lock: Provided
Sound recording: Built-in monaural microphone
Grid display: Two types
Movie editing: Editing out first and last scenes possible (1-sec.
increments)
• LCD Monitor
Type: TFT color, liquid-crystal monitor
Monitor size and dots: 2.7-in. with approx. 230,000 dots
Brightness adjustment: Manual (7 levels)
Interface languages: 25
Feature guide: Displayable
254
Specifications
• Playback
Image display formats: Basic info, basic info + image quality/playback number,
shooting info. display, histogram, 4-image index, 9-image
index, image rotate possible
Zoom magnification: Approx. 1.5x - 10x
Image browsing methods: Single image, jump by 10 or 100 images, by shooting
date, by folder, by movies, by stills, by rating
Highlight alert: Overexposed highlights blink
Movie playback: Enabled (LCD monitor, HDMI OUT)
Built-in speaker
• Direct Printing
Compatible printers: PictBridge-compatible printers
Printable images: JPEG and RAW images
Print ordering: DPOF Version 1.1 compatible
• Custom Functions
Y
Custom Functions: 10
P
My Menu registration: Possible
Copyright information: Entry and inclusion possible
• Interface
Digital terminal:
C O
For personal computer communication and direct printing
(Hi-Speed USB equivalent)
HDMI mini OUT terminal: Type C (Auto switching of resolution), CEC-compatible
Remote control terminal: For Remote Switch RS-60E3
Eye-Fi card: Compatible
• Power
Battery: Battery Pack LP-E10 (Quantity 1)
* AC power can be supplied via AC Adapter Kit ACK-E10
Battery life: With viewfinder shooting:
(Based on CIPA Approx. 700 shots at 23°C/73°F, approx. 650 shots at 0°C/32°F
testing standards) With Live View shooting:
Approx. 220 shots at 23°C/73°F, approx. 210 shots at 0°C/32°F
Movie shooting time: Total approx. 1 hr. 50 min. at 23°C/73°F
Total approx. 1 hr. 30 min. at 0°C/32°F
(With a fully-charged Battery Pack LP-E10)
• Dimensions and Weight
Dimensions (W x H x D): Approx. 129.9 x 99.7 x 77.9 mm / 5.1 x 3.9 x 3.1 in.
Weight: Approx. 495 g / 17.5 oz. (CIPA Guidelines),
Approx. 450 g / 15.9 oz. (Body only)
255
Specifications
• Operation Environment
Working temperature range: 0°C - 40°C / 32°F - 104°F
Working humidity: 85% or less
• Battery Pack LP-E10
Type: Rechargeable lithium-ion battery
Rated voltage: 7.4 V DC
Battery capacity: 860 mAh
Working temperature range:
During charging: 6°C - 40°C / 43°F - 104°F
During shooting: 0°C - 40°C / 32°F - 104°F
Working humidity: 85% or less
Dimensions (W x H x D): Approx. 36.2 x 14.7 x 49.0 mm / 1.4 x 0.6 x 1.9 in.
Weight: Approx. 45 g / 1.6 oz.
• Battery Charger LC-E10
Compatible battery: Battery Pack LP-E10
Recharging time: Approx. 2 hours (at 23°C / 73°F)
Y
Rated input: 100 - 240 V AC (50/60 Hz)
P
Rated output: 8.3 V DC / 580 mA
Working temperature range: 6°C - 40°C / 43°F - 104°F
Working humidity: 85% or less
C O
Dimensions (W x H x D): Approx. 67.0 x 30.5 x 87.5 mm / 2.6 x 1.2 x 3.4 in.
Weight:
• Battery Charger LC-E10E
Approx. 85 g / 3.0 oz.
Max. magnification:
PY
Closest focusing distance: 0.25 m / 0.82 ft. (From image sensor plane)
0.34x (at 55mm)
O
Field of view: 207 x 134 - 67 x 45 mm / 8.1 x 5.3 - 2.6 x 1.8 in. (at
0.25 m / 0.82 ft.)
C
Filter size: 58 mm
Lens cap: E-58
Max. diameter x length: Approx. 68.5 x 70.0 mm / 2.7 x 2.8 in.
Weight: Approx. 195 g / 6.9 oz.
Hood: EW-60C (sold separately)
Case: LP814 (sold separately)
All the data above is based on Canon’s testing standards and CIPA (Camera &
Imaging Products Association) testing standards and guidelines.
Dimensions, maximum diameter, length and weight listed above are based on
CIPA Guidelines (except weight for camera body only).
Product specifications and the exterior are subject to change without notice.
If a problem occurs with a non-Canon lens attached to the camera, consult the
respective lens maker.
257
Trademarks
Adobe is a trademark of Adobe Systems Incorporated.
Windows is a trademark or registered trademark of Microsoft Corporation in the
United States and other countries.
Macintosh and Mac OS are trademarks or registered trademarks of Apple Inc.
in the United States and other countries.
SDXC logo is a trademark of SD-3C, LLC.
HDMI, HDMI logo, and High-Definition Multimedia Interface are a trademark or
registered trademark of HDMI Licensing LLC.
All other corporate and product names and trademarks mentioned in this
manual are the property of their respective owners.
Y
“This product is licensed under AT&T patents for the MPEG-4 standard and may be
used for encoding MPEG-4 compliant video and/or decoding MPEG-4 compliant video
O P
that was encoded only (1) for a personal and non-commercial purpose or (2) by a
video provider licensed under the AT&T patents to provide MPEG-4 compliant video.
No license is granted or implied for any other use for MPEG-4 standard.”
C
* Notice displayed in English as required.
258
Safety Warnings
Follow these safeguards and use the equipment properly to prevent injury, death,
and material damage.
Preventing Serious Injury or Death
• To prevent fire, excessive heat, chemical leakage, and explosions, follow the
safeguards below:
- Do not use any batteries, power sources, and accessories not specified in this
booklet. Do not use any home-made or modified batteries.
- Do not short-circuit, disassemble, or modify the battery pack or back-up battery. Do
not apply heat or apply solder to the battery pack or back-up battery. Do not expose
the battery pack or back-up battery to fire or water. And do not subject the battery
pack or back-up battery to strong physical shock.
- Do not install the battery pack or back-up battery in reversed polarity (+ –). Do not
mix new and old or different types of batteries.
- Do not recharge the battery pack outside the allowable ambient temperature range
of 0°C - 40°C (32°F - 104°F). Also, do not exceed the recharging time.
- Do not insert any foreign metallic objects into the electrical contacts of the camera,
accessories, connecting cables, etc.
PY
• Keep the back-up battery away from children. If a child swallows the battery, consult a
physician immediately. (Battery chemicals may harm the stomach and intestines.)
O
• When disposing of a battery pack or back-up battery, insulate the electrical contacts
with tape to prevent contact with other metallic objects or batteries. This is to prevent
C
fire or an explosion.
• If excessive heat, smoke, or fumes are emitted during battery pack recharging,
immediately unplug the battery charger from the power outlet to stop the recharging
and prevent a fire.
• If the battery pack or back-up battery leaks, changes color, deforms, or emits smoke or
fumes, remove it immediately. Be careful not to get burned in the process.
• Prevent any battery leakage from contacting your eyes, skin, and clothing. It can
cause blindness or skin problems. If the battery leakage contacts your eyes, skin, or
clothing, flush the affected area with lots of clean water without rubbing it. See a
physician immediately.
• During the recharging, keep the equipment away from the reach of children. The cord
can accidentally choke the child or give an electrical shock.
• Do not leave any cords near a heat source. It can deform the cord or melt the
insulation and cause a fire or electrical shock.
• Do not fire the flash at someone driving a car. It may cause an accident.
• Do not fire the flash near a person’s eyes. It may impair the person’s vision. When
using flash to photograph an infant, keep at least 1 meter away.
• Before storing the camera or accessory when not in use, remove the battery pack and
disconnect the power plug. This is to prevent electrical shock, heat generation, and
fire.
• Do not use the equipment where there is flammable gas. This is to prevent an
explosion or fire.
259
• If you drop the equipment and the casing breaks open to expose the internal parts, do
not touch the internal parts due to the possibility of electrical shock.
• Do not disassemble or modify the equipment. High-voltage internal parts can cause
electrical shock.
• Do not look at the sun or an extremely bright light source through the camera or lens.
Doing so may damage your vision.
• Keep the camera from the reach of small children. The neck strap can accidentally
choke the child.
• Do not store the equipment in dusty or humid places. This is to prevent fire and
electrical shock.
• Before using the camera inside an airplane or hospital, check if it is allowed.
Electromagnetic waves emitted by the camera may interfere with the plane’s
instruments or the hospital’s medical equipment.
• To prevent fire and electrical shock, follow the safeguards below:
- Always insert the power plug all the way in.
- Do not handle a power plug with wet hands.
- When unplugging a power plug, grasp and pull the plug instead of the cord.
- Do not scratch, cut, or excessively bend the cord or put a heavy object on the cord.
Y
Also do not twist or tie the cords.
- Do not connect too many power plugs to the same power outlet.
P
- Do not use a cord whose insulation has been damaged.
O
• Occasionally unplug the power plug and use a dry cloth to clean off the dust around
the power outlet. If the surrounding is dusty, humid, or oily, the dust on the power outlet
C
may become moist and short-circuit the outlet to cause a fire.
Preventing Injury or Equipment Damage
• Do not leave equipment inside a car under the hot sun or near a heat source. The
equipment may become hot and cause skin burns.
• Do not carry the camera around while it is attached to a tripod. Doing so may cause
injury. Also make sure the tripod is sturdy enough to support the camera and lens.
• Do not leave a lens or lens-attached camera under the sun without the lens cap
attached. Otherwise, the lens may concentrate the sun’s rays and cause a fire.
• Do not cover or wrap the battery-recharging apparatus with a cloth. Doing so may trap
heat within and cause the casing to deform or catch fire.
• If you drop the camera in water or if water or metal fragments enter inside the camera,
promptly remove the battery pack and back-up battery. This is to prevent fire and
electrical shock.
• Do not use or leave the battery pack or back-up battery in a hot environment. Doing so
may cause battery leakage or a shorter battery life. The battery pack or back-up
battery can also become hot and cause skin burns.
• Do not use paint thinner, benzene, or other organic solvents to clean the equipment.
Doing so may cause fire or a health hazard.
260
MEMO
PY
C O
261
MEMO
PY
C O
262
MEMO
PY
C O
263
MEMO
PY
C O
264
MEMO
PY
C O
265
MEMO
PY
C O
266
MEMO
PY
C O
267
MEMO
PY
C O
268
Software Start Guide
PY
This chapter gives an overview of the software in the
EOS DIGITAL Solution Disk (CD-ROM) provided with
C O
the camera and explains how to install the software in a
personal computer. It also explains how to view the pdf
files in the Software Instruction Manual CD-ROM.
269
Software Start Guide
EOS Utility
With the camera connected to a personal computer, EOS Utility enables
you to transfer still photos and movies shot with the camera to the
computer. You can also use the personal computer to set various
camera settings and shoot remotely with the computer connected to the
camera.
PY
This software is recommended for users who mainly shoot RAW
C O
images. You can view, edit, process, and print RAW images at high
speed. You can also edit JPEG images while retaining the original
images.
270
Software Start Guide
Do not connect the camera to your computer before you install the
software. The software will not be installed correctly.
Even if a previous version of the software is installed, install the software
by following the steps below (the newer version will overwrite the
previous version).
PY
C O
271
Software Start Guide
P
O
Windows Macintosh
EOS Utility EUx.xW_E_xx EUx.xM_E_xx
Digital Photo Professional
ZoomBrowser EX /
ImageBrowser
Picture Style Editor
C DPPx.xW_E_xx
ZBx.xW_E_xx
PSEx.xW_E_xx
DPPx.xM_E_xx
IBx.xM_E_xx
PSEx.xM_E_xx
272
Quick Reference Guide and
Instruction Manual Index
PY
Menu Operations - - - - - - - - - - - - - - - - - - - - -
Image-recording Quality - - - - - - - - - - - - - - - -
p.274
p.275
C O
A Picture Style- - - - - - - - - - - - - - - - - - - - -
Q Quick Control - - - - - - - - - - - - - - - - - - - - -
Nomenclature - - - - - - - - - - - - - - - - - - - - - - -
Basic Zone Modes - - - - - - - - - - - - - - - - - - - -
p.275
p.276
p.277
p.279
r Using the Built-in Flash - - - - - - - - - - - - - - - p.279
Creative Zone Modes - - - - - - - - - - - - - - - - - - p.280
d: Program AE - - - - - - - - - - - - - - - - - - - - p.280
s: Shutter-priority AE - - - - - - - - - - - - - - p.280
f: Aperture-priority AE - - - - - - - - - - - - - p.280
E: AF Mode- - - - - - - - - - - - - - - - - - - - - - - - p.281
S AF Point - - - - - - - - - - - - - - - - - - - - - - - - p.281
Z: ISO Speed - - - - - - - - - - - - - - - - - - - - - - p.282
i Drive Mode - - - - - - - - - - - - - - - - - - - - - - p.282
A Live View Shooting- - - - - - - - - - - - - - - - - p.283
k Shooting Movies - - - - - - - - - - - - - - - - - - p.284
Image Playback - - - - - - - - - - - - - - - - - - - - - - p.285
273
Quick Reference Guide
Menu Operations
<0> button
LCD <S>
monitor Cross keys
<M>
button
1. Press the <M> button to display the menu.
2. Press the <U> key to select a tab, then press the <V>
Y
key to select the desired item.
3. Press <0> to display the setting.
C
Creative Zone Tabs
Modes
274
Quick Reference Guide
Image-recording Quality
Select [1 Quality], then press <0>.
Press the <U> key to select the quality, then press <0>.
Image-recording quality
Recorded pixels
Possible shots
A Picture StyleN
PY
C O
Select [2 Picture Style], then
press <0>.
Press the <V> key to select
the Picture Style, then press
<0>.
Style Description
P Standard Vivid colors and sharp images.
Q Portrait Nice skin tones and slightly sharp images.
R Landscape Vivid blue skies and greenery and very sharp images.
V Monochrome Black-and-white images.
For <S> (Neutral) and <U> (Faithful), see page 80.
275
Quick Reference Guide
Q Quick Control
Press the <Q> button.
The Quick Control screen will
appear.
PY
O
Shutter speed Aperture
C
Shooting mode Highlight tone priority
ISO speed
Exposure
compensation/ Flash exposure
AEB setting compensation
Auto Lighting
Picture Style Optimizer
AF mode Raise built-in flash
White Image-recording
balance quality
Drive mode Metering mode
In Basic Zone modes, the settable functions differ depending
on the shooting mode.
Press the <S> key to select a function, then turn the <6> dial to set it.
To raise the built-in flash, select <s>, then press <0>.
276
Quick Reference Guide
Nomenclature
Power switch Mode Dial
<D> Flash button
<6>
Main Dial
Shutter
button
PY
O
Focus mode switch
<O> Aperture/Exposure
compensation button C <A> AE lock button
<S> AF point
selection button
<S>
Cross keys
Access lamp
277
Quick Reference Guide
Y
Battery check
Metering mode
zxcn
P
OK NG Drive mode
Viewfinder Information
AF points
Focus
confirmation light
AE lock
Flash-ready Max. burst
Flash exposure
Monochrome shooting
compensation
Shutter speed ISO speed
Aperture Exposure level indicator
278
Quick Reference Guide
PY
In the C/2/3/4/5/6 shooting mode, press the <V>
key to select the function, then press the <U> key or turn
C
D Using the Built-in Flash
O
the <6> dial to set it as desired.
279
Quick Reference Guide
various ways.
Cre
d: Program AE
The camera automatically sets the shutter speed and
aperture in the same way as the <1> mode.
Set the Mode Dial to <d>.
s: Shutter-priority AE
PY
Set the Mode Dial to <s>.
O
Turn the <6> dial to set the desired
C
shutter speed, then focus the subject.
The aperture will be set automatically.
If the aperture display blinks, turn the
<6> dial until it stops blinking.
f: Aperture-priority AE
Set the Mode Dial to <f>.
Turn the <6> dial to set the desired
aperture, then focus the subject.
The shutter speed will be set
automatically.
If the shutter speed display blinks,
turn the <6> dial until it stops
blinking.
280
Quick Reference Guide
E: AF ModeN
Set the lens focus mode switch
to <f>.
Press the <ZE> button.
Press the <U> key or turn the
<6> dial to select the AF
mode, then press <0>.
X(One-Shot AF):
For still subjects
9(AI Focus AF):
Switches the AF mode
automatically
S AF PointN
PY
Z(AI Servo AF):
For moving subjects
O
Press the <S> button.
C
Press the <S> key to select the
AF point.
While looking through the
viewfinder, you can select the
AF point by turning the <6>
dial until the desired AF point
flashes in red.
Pressing <0> toggles the AF
point selection between the
center AF point and automatic
AF point selection.
281
Quick Reference Guide
Z: ISO SpeedN
Press the <WZ> button.
Press the <U> key or turn the
<6> dial to select the ISO
speed, then press <0>.
When [AUTO] is selected, the
ISO speed is set automatically.
When you press the shutter
button halfway, the ISO speed
setting will be displayed.
i Drive ModeN
PY
O
Press the <Yij> button.
C
Press the <U> key or turn the
<6> dial to select the drive
mode, then press <0>.
u : Single shooting
i : Continuous shooting
j : Self-timer:10 sec*
l : Self-timer:2 sec
q : Self-timer:Continuous*
* The <j> and <q> drive
modes can be selected in all
shooting modes (except <k>).
282
Quick Reference Guide
PY
O
Press the shutter button
C
completely to take the picture.
Live View shooting settings will appear under the [2] menu
tab in Basic Zone modes and under the [z] menu tab in
Creative Zone modes.
Battery Life with Live View Shooting
Temperature No Flash 50% Flash Use
At 23°C / 73°F Approx. 240 shots Approx. 220 shots
283
Quick Reference Guide
k Shooting Movies
Set the Mode Dial to <k>.
PY
shooting a movie.
To stop movie shooting, press
Recording movie C O
the <A> button again.
Microphone
284
Quick Reference Guide
Image Playback
y u y u
Index Magnify
PY L Erase
O
Select image
S
C
B Shooting information
x
Playback
285
Index
10-sec. or 2-sec. delay ...................87 Beeper.......................................... 154
1280x720 ......................................147 Black-and-white image..... 64, 80, 112
1st-curtain sync.............................169 Bracketing ............................ 103, 118
2nd-curtain sync ...........................169 Brightness (exposure) .................. 101
4- or 9-image index display...........176 Adjust
(exposure compensation) ........ 101
9-point AF auto selection ................83
Auto exposure bracketing
A (AEB) ............................... 103, 218
AC Adapter Kit ..............................228 Autoexposure lock (AE lock).... 105
Measurement method
Access lamp ...................................30
(Metering mode) ...................... 100
Accessories ......................................3
Built-in flash.................................... 88
A-DEP
Function setting ....................... 167
(Automatic depth-of-field AE)..........99
BULB (Bulb exposure) ................... 98
Adobe RGB...................................119
AE lock..........................................105 C
AEB.......................................103, 218
AF (Focusing) ...........................81, 83
PY
C (Creative Auto)......................... 55
Cable........................ 3, 184, 191, 241
O
AF point ..........................................83 Camera
Clear camera settings.............. 164
C
AI FOCUS (AI Focus AF)................82
Holding the camera.................... 38
AI SERVO (AI Servo AF) ................82 Settings display........................ 163
AI Servo AF ..............................52, 82 Camera shake.......................... 37, 38
Aperture-priority AE ........................94 Card ................................... 15, 28, 44
Auto Lighting Optimizer ..........49, 107 Card reminder.......................... 154
Auto playback ...............................189 Eye-Fi ...................................... 230
Auto power off...............................155 Format ....................................... 44
Problem ............................... 30, 45
Auto reset .....................................159
SD speed class........................ 139
Auto rotate of vertical images .......162 SDHC/SDXC.............................. 28
Autofocus..................................81, 83 Write-protect .............................. 28
Automatic selection of AF point ......83 Center-weighted average
Av (Aperture-priority AE).................94 metering ....................................... 100
B Charger .................................... 24, 26
Cleaning ....................................... 173
B/W (Monochrome).................80, 112
Clear camera settings .................. 164
Basic Zone modes ..........................22
Close-ups ....................................... 60
Battery ................................26, 28, 32
Color space .................................. 119
Battery check ..................................32
286
Index
Y
DC coupler ....................................228
Effective range ........................... 88
Depth-of-field preview .............96, 222
P
External Speedlite .................... 226
Dial............................................18, 91 FE lock ..................................... 106
Digital terminal ..............................202
C
Dioptric adjustment .........................38
Direct printing................................201O
DPOF ............................................211
Flash control ............................ 167
Flash exposure compensation ... 102
Flash off ......................... 54, 57, 63
Flash-sync speed............. 218, 227
Manual flash............................. 168
Drive mode..........................20, 57, 86 Red-eye reduction...................... 89
Dust Delete Data...........................171 Shutter sync. (1st/2nd curtain) ... 169
E Flash exposure compensation ..... 102
Flash mode................................... 168
Erase (image) ...............................196
Flash-sync contacts........................ 18
Error codes ...................................250
Focus confirmation light ................. 50
Evaluative metering ......................100
Focus lock ...................................... 52
Exposure compensation ...............101
Focus mode switch........... 35, 85, 135
Exposure level increments............218
Focusing
Extension ......................................159
AF mode .................................... 81
External Speedlite .........................226 AF point selection ...................... 83
Custom Function setting...........170
AF-assist beam .................. 84, 220
Function setting ........................167
Beeper ..................................... 154
Eyecup ..........................................229 Difficult-to-focus subjects ... 85, 132
Eye-Fi card....................................230 Manual focusing................. 85, 135
287
Index
Y
High-Definition (HD)......147, 184, 191 with ISO Auto............................. 78
P
Highlight alert................................200
J
Highlight tone priority ............146, 220
O
Histogram (Brightness/RGB) ........200 JPEG.............................................. 74
C
Hot shoe .......................................226 Jump display ................................ 177
Household power..........................228 L
I 83 (Large/Normal)........................ 74
73 (Large/Fine) ............................ 74
ICC profile.....................................119
Landscape................................ 59, 79
Image
Auto playback...........................189 Language selection ........................ 34
Auto rotate................................162 LCD monitor ................................... 15
Erased ......................................196 Brightness adjustment ............. 155
Highlight alert ...........................200 Image playback........................ 175
Histogram .................................200 Menu screen .............................. 42
Image characteristics Screen color............................. 166
(Picture Style) .............79, 110, 113 Shooting settings display ..... 20, 46
Index.........................................176 Lens ......................................... 23, 35
Jump display Image Stabilizer ......................... 37
(Image browsing)......................177 Lock release .............................. 36
Magnified view..........................178 Peripheral illumination
Manual rotate ...........................179 correction ................................. 108
No.............................................158 Zoom.......................................... 36
Playback.....................................70
288
Index
Y
View on TV....................... 184, 191
Macro photography .........................60
My Menu....................................... 224
P
Malfunction....................................242
N
O
Manual exposure ............................97
Manual focus (MF) ..................85, 135 Neutral............................................ 80
C
Manual reset .................................159
Manual selection (AF) .....................83
Maximum burst .........................74, 75
Memory card .......................15, 28, 44
Night Portrait .................................. 62
Night scene .............................. 59, 62
No................................................. 158
Noise reduction
High ISO speed........................ 219
Menu ...............................................42
Long exposures ....................... 219
My Menu...................................224
Setting procedure .......................43 Nomenclature ................................. 18
Settings.....................................234 Non-Canon flash units.................. 227
3 icon .........................................4 Normal (Image-recording quality)... 74
Metering mode ..............................100 NTSC............................................ 147
Metering timer .......................127, 148 O
MF (Manual focusing) .............85, 135
ONE SHOT (One-Shot AF) ............ 81
84 (Medium/Normal) ....................74
P
74 (Medium/Fine).........................74
Microphone ...................................140 P (Program AE) .............................. 72
289
Index
Y
Sensor cleaning ........................... 173
Predictive (AI Servo).......................82 Sepia (Monochrome).............. 64, 112
Pressing completely........................39
Pressing halfway.............................39
O P
7a (Small 1/Fine)......................... 74
b (Small 2) ................................... 74
C
Printing..........................................201 c (Small 3) ................................... 74
Layout.......................................205
Sharpness .................................... 111
Paper settings ..........................204
Shoot by ambience selection ......... 64
Print Order (DPOF) ..................211
Printing effects..........................208 Shoot by lighting or scene type ...... 67
Tilt correction ............................209 Shooting information display ........ 198
Trimming...................................209 Shooting mode ............................... 22
Program AE ....................................72 A-DEP (Automatic depth-of-field
Program shift ..................................73 AE)............................................. 99
M (Manual exposure)................. 97
Protect (image erase-protection) ..194
Av (Aperture-priority AE)............ 94
Q Tv (Shutter-priority AE) .............. 92
Q (Quick Control) ............40, 63, 182 P (Program AE) ......................... 72
1 (Full Auto) ............................ 50
Quick mode (AF)...........................133
7 (Flash Off)............................ 54
R C (Creative Auto) .................... 55
Rating ...........................................180 2 (Portrait)................................ 58
3 (Landscape)......................... 59
1 (RAW) ...............................74, 76
4 (Close-up) ............................. 60
1+73...................................74, 76 5 (Sports) ................................ 61
290
Index
Y
sRGB ............................................119
P
Stopped-down aperture ..........96, 222
O
Strap ...............................................25
System map ..................................240
T
Temperature warning ............136, 150 C
Tone priority ..........................146, 220
Toning effect (Monochrome) .........112
Trimming (printing) ........................209
Tripod socket ..................................19
Tv (Shutter-priority AE) ...................92
U
USB (Digital) terminal ...................202
V
View on TV............................184, 191
Viewfinder .......................................21
Dioptric adjustment.....................38
Volume (Movie playback)..............187
291
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
Y
Via Milano 8, 20097 San Donato Milanese, (MI), Italy
CANON Schweiz A.G.
P
Industriestrasse 12, 8305 Dietlikon, Switzerland
Canon GmbH
O
Zetschegasse 11, A-1230 Vienna, Austria
CANON España,S.A.
C
Av. De Europa,6 Alcobendas 28108 Madrid, Spain
CANON Portugal S.A.
Rua Alfredo da Silva,14 Alfragide 2610-016 Amadora, Portugal
CENTRAL & CANON LATIN AMERICA, INC.
SOUTH AMERICA 703 Waterford Way, Suite 400 Miami, FL 33126,U.S.A.
ASIA CANON (China) Co., LTD.
15F Jinbao Building No.89 Jinbao Street, Dongcheng District, Beijing 100005, China
CANON HONGKONG CO., LTD.
19/F., The Metropolis Tower, 10 Metropolis Drive, Hunghom, Kowloon, Hong Kong
CANON SINGAPORE PTE. LTD.
1 HarbourFront Avenue, #04-01 Keppel Bay Tower, Singapore 098632
CANON KOREA CONSUMER IMAGING INC.
Canon BS Tower 5F, #168-12 Samseong-dong, Gangnam-gu, Seoul, Korea
OCEANIA CANON AUSTRALIA PTY. LTD.
1 Thomas Holt Drive, North Ryde, Sydney N.S.W. 2113, Australia
CANON NEW ZEALAND LTD.
Akoranga Business Park, Akoranga Drive, Northcote, Auckland, New Zealand
JAPAN CANON MARKETING JAPAN INC.
16-6, Kohnan 2-chome, Minato-ku, Tokyo 108-8011, Japan