Scribd Logo
Upload

Welcome to Scribd!

  • Technical Data Sheet: Hi-Therm BC-346-A

    Uploaded by

    vignesh vikky
    167 views2 pages
    fdh

    Original Title

    Document(1)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    fdh

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    167 views2 pages

    Technical Data Sheet: Hi-Therm BC-346-A

    Uploaded by

    vignesh vikky
    fdh

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 2

    TECHNICAL DATA SHEET

    320 New Road Ph:(732) 329-2333


    Monmouth Junction, NJ Fax:(732) 329-1143
    08852 [email protected]
    JOHN C. DOLPH COMPANY www.dolphs.com

    HI-THERM® BC-346-A
    CLEAR BAKING VARNISH

    PRODUCT DESCRIPTION
    BC-346-A is a specially formulated, high temperature varnish, which can be used in a wide range of
    dip and bake applications.

    FEATURES & BENEFITS

    • Excellent flexibility • Military approval - Qualified under


    • Excellent adhesion MIL-I-24092, Grade CB, Class 155 and 180
    • High film build • UL recognized varnish in systems up to 220°C
    • Superior wetting properties

    TYPICAL APPLICATIONS

    • Transformers • Random Wound Coils


    • Stators • Armatures
    • Form Wound Coils • Relays

    TYPICAL PROPERTIES
    Physical
    Color/Appearance Light-Dark Amber

    Density @ 77°°F (25°°C), Lbs/gal 7.4 - 7.8

    Viscosity @ 77°F (25 °C), Brookfield Viscometer, cps 150 - 320

    Flash Point, °F 54

    Film Build, mils/side, ASTM D-115 1.0 – 3.0

    Thinner (solvent) T-200X or T-100

    VOC Content, ASTM D 6053, lbs/gal 3.8

    Corrosive Effect on Copper None

    All statements, technical information and recommendations related to Sellers’ products are based on information believed to be reliable, but the accuracy or completeness thereof is not guaranteed. Before
    using the product, the user should determine the suitability of the product for its intended use. The user assumes all risks and liabilities whatsoever in connection with such use. The statements contained
    herein are made in lieu of all warranties, expressed or implied. Seller shall not be liable for any injury, loss or damage, direct or consequential, arising out of the use or inability to use its products. The sole
    liability of John C. Dolph Co., Inc. for any claims arising out of the manufacture, use or sale of its products shall be for the buyer’s purchase price.
    Page 2 of 2
    Mechanical
    Bond Strength, Helical Coil Method, lbs to break @25°°C 28
    @150ºC 2.5
    Thermal Conductivity, ASTM C 3111, BTU-in./hr-ft -°°F
    2
    2.4

    Electrical
    Dielectric Strength ASTM D115, volts/mi Dry 4,000
    Wet 2,900

    Chemical Resistance
    Water Excellent

    Acid (10% Sulfuric Acid) Excellent

    Alkali (1% Sodium Hydroxide) Excellent

    Salt Water Excellent

    Oil, ASTM D-115 Passed

    Thermal Class (UL-1446)


    Twisted Pair MW16 240
    MW24 155
    MW28 155
    MW30 180
    MW35 200
    MW76 180

    APPLICATION GUIDELINES
    Following is a suggested dip and bake cycle. Suggested Bake Cycles*
    1. Preheat parts to 250-325°F to remove moisture. 1-2 hours @ 325°F
    Note: If thermoset tapes are used, preset tapes according to 2-3 hours @ 300°F
    tape manufacturer’s recommendations. o
    2-4 hours @ 275 F
    2. Cool to I30°-140°F
    3. Dip until bubbling stops (15-30 minutes). * Times are taken after unit reaches baking temperature
    4. Drain between 5-20 minutes
    5. Bake in a preheated oven at recommended
    time and temperature

    STORAGE AND SHELF LIFE


    Shelf life is one year from date of shipment from our plant, when stored in closed containers at 70°F or below.
    1. Store in cool, dry place at 70°F/21°C or below.
    2. Protect from direct sunlight and sources of heat
    3. Keep away from heat, sparks and open flame.
    AUTHORIZED DISTRIBUTOR
    SAFETY AND ENVIRONMENT
    Avoid contact with skin and eyes. See Material Safety Data
    Sheet.

    SP/ds/BC346-A.12/19/08

    You might also like